North Eastern Railway Tender

Supply of Insulated material for ground connection of EPM as per tech specification attached, inspection- Consignee. 5

Supply of Condenser 5000 mfd/50V as per tech specification attached, inspection-Consignee. 6

Supply of Resistance 10 Ohm/ 10 Watt as per tech specification attached, inspection-Consignee.

Painting of Point Machine with ground connections complete including supply of Paint.( Point machine with black enamel only out side and ground connection with red oxide) as per tech specification attached.

Transportation of Materials Including Loading and unloading from consignee's store/ any station to other any station/ store as per tech specification attached. 9

"Supply of Maintenance Tool Kit as per tech specification attached, inspection-Consignee.

Supply of Track Feed battery Charger as per RDSO Spec. No. IRS-S-89/2013 Ver. 1.0 as per tech specification attached, inspection-RDSO.

SUPPLY OF Non Metallic ARM TYPE JUNCTION ROUTE INDICATOR COMPLETE WITHOUT LENSES AND LIGHT UNIT 2 WAY SUITABLE FOR LED SIGNAL UNITS as per RDSO/SPN/194/2006 rev. or latest IRS:S:66/84 & RDSO DRG. NO. 23403 ( ADV.) 4 WITH LATEST AMENDMENT IF ANY & as per technical specification attached, inspection-Consignee.

Supply of Elbow for Home Signal 5.5" as per RDSO Drg no. SA 23080 (ad) with latest amendment as per tech specification attached, inspection-Consignee. 5

Supply of C.I. Tubular base for CLS as per tech specification attached, inspection-Consignee. 6

Supply of CLS Post of 4.6 M as per tech specification attached, inspection-Consignee.

Supply of Non metallic CLS unit 2 Aspect as per Drg No. 23003 A/M ( Adv ) but without lamp, lenses, holder and signal transformer as per RDSO/SPN/194/2006 rev.or latest as per tech specification attached, inspection-Consignee.

Supply of Non metallic CLS unit 3 Aspect as per Drg No. 23002 A/M ( Adv ) but without lamp, lenses, holder and signal transformer suitable for LED signal.as per RDSO/SPN/194/2006 rev. or latest as per tech specification attached, inspection-Consignee. 9

Supply of Ladder for CLS of 4.6 Mtr post as per tech specification attached, inspection-Consignee.

Casting of CLS foundation including supply of concreting materials and foundation bolts as per tech specification attached.

Erection and fitting and wirring of CLS posts with unit on already casted signal foundation with fixing of Ladder and staginig as per tech spec. 12

Termination of signalling cable as per tech specification attached.

Fitting of LED signal with all accessories and its wiring . All material required for fitting and wiring except LED signal and PVC wire shall be supplied by the contractor. 14

Supply & Installation of Number Plate of Signals as per tech specification attached, inspection-Consignee.

Supply and fixing of P/G/C markers with complete fittings as per tech specification attached, inspection- Consignee. All material require for the job will be supplied by the contractor as per direction of site engineer.

Supply & installation of OFC integrated access device 1U height or1.5 U height/19" rack mountable for LVCD/Digital Axle Counter purpose with four tributary slots & four potential free contacts to know quad status , front panel Quad indication status vide LEDs, Optical support vide four SFP port supporting TDMoIP, CESoPSN,SAToP in the unit supporting dual core OFC or single core as required and Four 100/1000 mbps Ethernet port (all ports POE ) for surveillance/smoke detector, VOIP control phone , optical SFP ports provided distance support to be 20 KMs, unit to support two E&M card supporting four 2W/4W 1 configurable & four quad port 2W/4W. Each port configurable to support axle counter/UFSBI/control phone/EC/RTU and one telnet/SNMP port, unit to support Four E1 ports in addition to Four SFP ports of TDMoIP, CESoPSN,SAToP dual DC power supply 18 to 72 VDC support , unit to support change over mechanism automatic between E&M (V.21) to E1 port & optical fiber TDMoIP (SFP) & quad path for E&M interface option, one number cable to be provided along with E&M. Equipment should be able integrate with STM E1 & IPMPLS 1Gbps ports ; unit to support complete cross-connect of inputs vide 1G Ethernet uplinks or E1 as desired and for networking among them FABIO 2CX+/OFC/ DC & module 2W/4W four port E&M (1+1) protection Make: TEAM ENGG/FABIO /TANSY or equivalent as per tech specification attached, inspection-RITES. 2

Supply of PVC Wire 16x0.2 sq mm as per tech specification attached, inspection-Consignee.

Supply of indication cum-alarm box for Media change-over switch as per technical specification attached, Inspection-Consignee. 4

Installation, and commissioning of indication cum-alarm box as per technical specification attached.

Supply of ARA terminal 6 way as per tech specification attached, inspection-RDSO. 2

Supply

Excavation of cable trench of 110 cm Depth and 30 cm Width in all kind of soils and its refilling with the same excavated soil consolidating by ramming to the level of 20 cm above the ground level over the trench as per tech specification attached.

Excavation of cable trench of 100 cm Depth and 30 cm Width at level/track crossing and platform and its refilling with the same excavated soil consolidating by ramming to the level of 20 cm above the ground level over the trench as per tech specification attached.

"Horizontal direction drilling [HDD]/Trenchless digging/machine drilling without damage to surface road /track for laying/insertion of HDPE/GI/DWC pipe. The bore shall be done at the depth of minimum 1400mm from the ground level. The 6 ground level shall be considered ignoring the bank height of the bank of the road. Note:- DWC/HDPE/GI Pipe Supply is not covered under this item. Contactor shall provide all material required forwork and adequate nos.of labours for properlaying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling &pressure on cable. Payment of boring shall be made only after DWC/HDPE/GI pipe is laid in the bore."

Excavation of trenchless Track under railway Track/Busy Road at a depth of 100 cm below ground level and Culvert /River, (in HDD Portion) Laying of 100 mm Dia GI pipe medium grade in it(GI pipe shall be Supplied by contracor) Note: - pipe inspection by consignee.

Laying of signaling cable (2 core to 12 core) in the trench as per cable route plan approved by railway and megering of all main & tail cables. The cable laying includes laying of cable in trenches as per tech specification attached.

Laying of GI/HDPE pipe for passing the cables at level /track crossing and platform as per tech specification attached.

Cement concrete work for miscellaneous items in the ratio 1:3:6. Item includes excavation ,ramming, curing and plastering with cement sand mixture (aggregate not exceeding 3.8cm). Aggregate, cement and to be supplied by contractor as per tech specification attached.

Providing Brick masonary in the ratio 1:6 cement &mortar including plastering with 1;4 cement and sand mixture both sides, 20 mm thick each with contractors own 2nd class brick, including excavation curing grouting bolting etc wherever required .Brick sand & cement to be supplied by the contractor as per technical specification attached.