Nalanda University Tender
With BidAssist, you can search for multiple business options for RWD Bihar tenders, RCD Bihar tenders, and any other e tender Bihar government is inviting bids for. Such Bihar tenders are posted on the eprocurement Bihar website, and on this page, you will get consolidated lists of Bihar tenders that can be sorted based on authority, department, city, and more.
Costs
EMD
₹ 76,38,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_NUNIV_413417_1Bid Award Id
ViewTender No
NU/Engg/2018-19/P3CPh1/HVAC/11 Dated 01.12.2018Tender Authority
Nalanda University ViewPurchaser Address
-Website
http://https://nalandauniv.edu.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
SITC OF HVAC SYSTEM UNDER TENDER PACKAGE 3C PHASE I OF NALANDA UNIVERSITY
BILL OF QUNATITY. BIDDERS TO QUOTE BELOW OR AT PAR OR ABOVE ERCENTAGE FOLLOWED THE HARD COPY UNDER ENVELOPE 3 SUBMISSION, BY SAME AS UPLOADED ON CPPP.
SEQUENCE OF QUANTITY FOR UNDERSTANDING THE TYPES OF MATER AND SCOPE OF WORKS FOR PERFORMING THE HVAC WORKS WITH HEATING AND COLLING FEATURES BOTH WITHIN THE PROVIDED LINE ITEMS.
BOQ Items
Supply, Installation, Testing & Commissioning of HEAT PUMP
150 TR water to water Heat pump
3
-
2742348.3
SITC 55 TR water to water Heat pump
2
-
2000945.38
Supply, Installation, Testing & Commissioning of pumping system with VFD
Supply, testing and commissioning of external seal type Vertical In-Line Centrifugal pumping unit. The pump shall be radially split, single stage centrifugal type. TEFC ventilated induction motor with class' F' insulation of 3 Phase, suitable for 415 volts +10% A.C. supply. Motor shall be of IE2 efficiency and IP 55 rated. The Coupling shall be rigid spacer type of high tensile aluminium alloy. The duty point of the pump shall be defined in the pump curve. The pump selected for variable speed drive shall be capable of performing satisfactorily over a wide range of speed, allowing a speed variation from 30 % to 100 %. VFD - The variable frequency drive(s) shall be of pulse width modulation (PWM) type, microprocessor controlled design. It shall be capable of operating in voltage ranges of 380 to 415 V +/- 10% AC, three phase; at frequencies of 47 to 60 Hz and shall be factory fitted and unit mounted. The control should be a low harmonic control with a built-in DC link reactor equivalent in performance to a 5% AC line reactor. VFD shall be IP55 rated. Variable Frequency Drives VFDs should have graphical interface with IP55 Protection to work on Sensor less & with Sensor technology.
Primary Brine Pump with bronze impeller ,speed 1450 RPM & Efficiency not less than 80%
(2#Working+1 stand by ) with control panel.
Water Qty : 432 USGPM With Static Head :10 Mtrs
3
-
168304.08
Primary Chilled water pump with bronze impeller ,speed 1450 RPM & Efficiency not less than 80%
(5#Working+1 stand by ) with control panel.
Water Qty : 648 USGPM With Static Head : 10 Mtrs
6
-
300147.42
Primary Chilled water pump with bronze impeller ,speed 1450 RPM & Efficiency not less than 80%
(2#Working+1 stand by ) with control panel.
Water Qty : 132 USGPM With Static Head : 10 Mtrs
6
-
96129.63
Secondary Chilled water pump with bronze impeller ,speed 1450 RPM & Efficiency not less than 80%
(3#Working+1 stand by ) with control panel.
Water Qty : 648 USGPM With Static Head : 30 Mtrs
4
-
318578.59
Secondary Chilled water pump with bronze impeller ,speed 1450 RPM & Efficiency not less than 80%
(2#Working+1 stand by ) with control panel.
Water Qty : 132 USGPM With Static Head : 20 Mtrs
6
-
133199.77
Condenser & PHE Pump with bronze impeller ,speed 1450 RPM & Efficiency not less than 80%
(2#Working+1 stand by )X 2 with control panel.
Water Qty : 220 USGPM With Static Head : 15 Mtrs
12
-
123454.82
Condenser Pump with bronze impeller ,speed 1450 RPM & Efficiency not less than 80%
(3#Working+1 stand by ) with control panel.
Water Qty : 1080 USGPM With Static Head : 15 Mtrs
4
-
540055.86
Condenser & PHE pump with bronze impeller ,speed 1450 RPM & Efficiency not less than 80% (4#Working+4 stand by ) X 2 with control panel.
Water Qty : 290 USGPM With Static Head : 30Mtrs
16
-
214943.66
Condenser & PHE pump with bronze impeller ,speed 1450 RPM & Efficeincy not less than 80% (2#Working+2 stand by ) X 2 with control panel.
Water Qty : 400 USGPM With Static Head : 30Mtrs
6
-
254100.4
Condenser & PHE pump with bronze impeller ,speed 1450 RPM & Efficiency not less than 80% (3#Working+3 stand by ) X 2 with control panel.
Water Qty : 500 USGPM With Static Head : 30Mtrs
12
-
258032.09
Primary Hot water pump with bronze impeller ,speed 1450 RPM & Efficiency not less than 80%
(3#Working+1 stand by ) with control panel.
Water Qty : 380 USGPM With Static Head : 10 Mtrs
4
-
226654.45
Secondary Hot water pump with bronze impeller ,speed 1450 RPM & Efficiency not less than 80%
(2#Working+1 stand by ) with control panel.
Water Qty : 380 USGPM With Static Head : 30 Mtrs
3
-
260445.86
Condenser pump with bronze impeller ,speed 1450 RPM & Efficiency not less than 80% for geo-thermal
(#1 Working+1 stand by ) with control panel.
Water Qty : 132 USGPM With Static Head : 30 Mtrs
2
-
163445.64
Hot water pump with bronze impeller ,speed 1450 RPM & Efficiency not less than 80% for geo-thermal
(#1 Working+1 stand by ) with control panel.
Water Qty : 132 USGPM With Static Head : 30 Mtrs
3
-
163445.64
Condenser & PHE pump with bronze impeller ,speed 1450 RPM & Efficiency not less than 80% (#2 Working+1 stand by ) X 2 with control panel.
Water Qty : 960 USGPM With Static Head : 30 Mtrs
18
-
441696.41
Tertiary Pump -with bronze impeller ,speed 1450 RPM & Efficiency not less than 80% with control panel.
Water Qty : 300 USGPM With Static Head : 15 Mtrs (2W+2S)
4
-
168304.08
Tertiary Pump -with bronze impeller ,speed 1450 RPM & Efficiency not less than 80% with control panel.
Water Qty : 60 USGPM With Static Head : 10 Mtrs (1W+1S)
2
-
86075.76
Tertiary Pump -with bronze impeller ,speed 1450 RPM & Efficiency not less than 80% with control panel.
Water Qty : 260 USGPM With Static Head : 10 Mtrs (1W+1S)
2
-
152647.56
Tertiary Pump -with bronze impeller ,speed 1450 RPM & Efficiency not less than 80% with control panel.
Water Qty : 160 USGPM With Static Head : 10 Mtrs (2W+2S)
4
-
96129.63
Tertiary Pump -with bronze impeller ,speed 1450 RPM & Efficiency not less than 80% with control panel.
Water Qty : 120 USGPM With Static Head : 10 Mtrs (1W+1S)
2
-
96129.63
Tertiary Pump -with bronze impeller ,speed 1450 RPM & Efficiency not less than 80% with control panel.
Water Qty : 60 USGPM With Static Head : 10 Mtrs (1W+1S)
2
-
86075.76
Tertiary Pump -with bronze impeller ,speed 1450 RPM & Efficiency not less than 80% with control panel.
Water Qty : 150 USGPM With Static Head : 10 Mtrs (1W+1S)
2
-
96129.63
Tertiary Pump -with bronze impeller ,speed 1450 RPM & Efficiency not less than 80% with control panel.
Water Qty : 45 USGPM With Static Head : 10 Mtrs (1W+1S)
2
-
86075.76
Tertiary Pump -with bronze impeller ,speed 1450 RPM & Efficiency not less than 80% with control panel.
Water Qty : 200 USGPM With Static Head : 10 Mtrs (1W+1S)
2
-
152647.56
Horizontal Geo-thermal
Geophysical analysis of Field: Comprehensive geophysical analysis that includes electrical soundings, electrical resistivity analysis, precision horizontal trenching, and development of CFVS geothermal sink by International Ground Source Heat Pump Association (IGSHPA) accredited driller and installer & will submit the report in hard& soft copy, complete, etc, as required
1
-
650000
Supply, Installation, Testing & Commissioning of PE100, Density 940 kg/m3, Pressure rating PN16 HDPE pipes including making and pressure testing of Geo Exchange LOOPS of required length upto the common header connection of geothermal system. Bends shall be joined by socket fusion joining method with HDPE Pipes of size 32 mm with 3.0 MM wall thickness . All pipes shall be joined by Butt Fusion used for Horizontal Geothermal.
12000
-
525
Excavating trenches upto a length of 40 m, dressing of sides, ramming of bottom upto the depth of 2.5 m in ground in soft / hard soil including removing the excavated soil and then refilling the soil after layying the pipe as required of 1 m width or as required to accommodate the slinkies of HDPE pipe
100
-
546
SITC of HDPE pipes with 4.6 MM wall thickness cut to required lenghts as per the specifications.
50 mm dia pipes (OD) for making of header
4500
-
725
Providing the following HDPE pipes jointing connectors with end caps and Elbow with sockets as per the specifications. Bends shall be butt welded with HDPE Pipes.
50 mm dia pipes (OD)- Elbows/Socket & Tee
200
-
1650
Providing the following HDPE pipes jointing connectors with end caps and Elbow with sockets as per the specifications. Bends shall be butt welded with HDPE Pipes.
32 mm dia pipes (OD)- Elbows/Socket & Tee
125
-
925
Providing and filling in trenches with sand for a thickness of 0.15 meter to cover HDPE pipes including watering, ramming, consolidating and dressing complete in all respect as required by Engineer Incharge.
375
-
400
Supply, installation, testing & Commissioning of Thermal Energy Storage System of 3070 TRH Capacity complete with M.S Tank, Tank Insulation, Thermal Storage media and Mono Ethylene Glycol for Tank including all necessary accessories complete etc. as required.
1
-
20125297.98
Supply, installation, testing & Commissioning of Thermal Energy Storage System of 410 TRH Capacity complete with M.S Tank, Tank Insulation, Thermal Storage media and Mono Ethylene Glycol for Tank including all necessary accessories complete etc. as required.
1
-
1699048.36
Supply, installation, testing & Commissioning of Thermal Energy Storage System of 625 TRH Capacity complete with M.S Tank, Tank Insulation, Thermal Storage media and Mono Ethylene Glycol for Tank including all necessary accessories complete etc. as required.
1
-
2948761.61
Plate Heat Exchanger (PHE) ( AHRI Approved )
175 TR -420 USGPM (inlet/outlet temp.-0/5˚C & 7˚C/12˚C)
1
-
800000
Plate Heat Exchanger (PHE) ( AHRI Approved )
72 TR -288 USGPM (inlet/outlet temp.-32˚C/36˚C & 36˚C/32˚C)
8
-
519543.71
Plate Heat Exchanger (PHE) ( AHRI Approved )
100 TR -400 USGPM (inlet/outlet temp.-32˚C/36˚C & 36˚C/32˚C)
4
-
674002.65
Plate Heat Exchanger (PHE) ( AHRI Approved )
125 TR -500 USGPM (inlet/outlet temp.-32˚C/36˚C & 36˚C/32˚C)
6
-
793357.29
Plate Heat Exchanger (PHE) ( AHRI Approved )
66 TR -264 USGPM (inlet/outlet temp.-0˚C/5˚C & 7˚C/12˚C)
6
-
117950.46
Plate Heat Exchanger (PHE) ( AHRI Approved )
240 TR -960 USGPM (inlet/outlet temp.-32˚C/36˚C & 36˚C/32˚C)
9
-
940795.37
Cooling Tower (Open circuit )
Supply, installation, testing and commissioning of Multicell FRP induced draft cooling tower with FRP water basin, PVC fills with integral louvers and drift eliminators complete with hot water basin either fitted with spray nozzles or having self rotating sprinklers, statically & dynamically balanced axial flow, gear/direct driven fans with TEFC induction motor of class F insulation, efficiency class IE-3 suitable for operation on 415 + 10% volts, 50 Hz. AC supply; suction screen, make up-quick fill arrangement, overflow and drain connections with all necessary valves & foot valves, suitable inspection ladder, access arrangement for cooling tower interior, steel /masonry supporting structure with proper design, anti-vibration mountings, suitable civil foundation as per manufacturer's standard with foundation nuts, bolts, painting etc. complete as required and as per specification with the following: 29° C Wet bulb temp (monsoon) , 36 ° C Entering water temp, 32° C Leaving water temp .
capacity : 270 TR
(3#Working+1 stand by )
4
-
786336.43
capacity : 72 TR
4 Set of (1 # Working+ 1 stand by )
8
-
227475.9
capacity : 125 TR
4 Set of (1 # Working+ 1 stand by )
8
-
300492.85
capacity : 240 TR
3 Set of (2 # Working+ 1 stand by )
9
-
735786.23
capacity : 66 TR
1 Set of (2 # Working+ 1 stand by ) for NU amenities & Dining hall
3
-
280132.35
Cooling Tower (close circuit )
Supply, Installation, Testing and Commissioning of CTI Certified Closed Circuit Cooling Tower with SS Coils and GSS casing and basin. The steel cooling tower shall have a separate pump and for evaporative cooled water which shall be sprayed over the SS tube bundle carrying the closed circuit water. 29° C Wet bulb temp (monsoon) , 36 ° C Entering water temp, 32° C Leaving water temp .
capacity : 270 TR ( OPTION-2)
(3#Working+1 stand by )
1
-
6383085.96
capacity : 100 TR
2 Set of (1 # Working+ 1 stand by ) for NU school & Hostel
4
-
3215919.41
Package Air Conditioning Unit for Server Room
Supply, Installation, Testing , Commissioning & Air-Balancing of Floor mounted aircooled type package unit complete with the following components- Indoor unit comprising of Scroll type hermetically sealed compressor, cooling coil, Centrifugal blower, Blower motor, drain tray, 20 Micron HDPE washable filters, Microprocessor based control unit, electrical junction box etc. Outdoor unit comprising of condenser coils, DIDW forward curve fans, pressure switches / cutouts etc. Necessary Refrigerant Gas and oil charge. Inter-connected refrigerating piping of Hard drawn copper duly painted with synthetic enamel paints of Standard make. . Complete electrical power wiring of Al. & control wiring of copper required from indoor and outdoor units. Earthing of the complete system with 8 G G.I. wire in the cable trays.
Supply, installation, testing & commissioning of 5 TR PAC complete with all accessories.
2
-
138872.63
Pressurised Closed Expansion Tank Supply, installation, testing, balancing and commissioning of PRESSURISED CHILLED WATER EXPANSION TANK along with necessary accessories such as air vents, Safety Valves, Pressurisation pumps and its panel , with required Support & Foundation etc. in order to keep chilled water system under pressure and to prevent entrapment of air in the system. The tank shall be precharged M.S expansion tank with replaceable heavy duty butyl rubber bladder. The tank shall have 20 mm drain and charging valve connection to facilitate the onsite charging of the tank to meet system requirement. The tank shall be fabricated as per Indian standard code for “non-fired pressure vessels” and the flanges shall be as per IS 6392-1971. For chilled/hot water application, it will be insulated with 50mm thick insulation to the specifications and cladded with 26 G-aluminium cladding. The expansion tank shall be supplied along with pressurization unit. Install Expansion tank in accordance with manufacturer’s written instructions. The drawing, schedules and specification shall be referred. The tank shall be designed to absorb the expansion forces of cooling/heating system water while maintaining proper system pressurization under varying operating conditions. The heavy duty bladder should contain system water thereby eliminating tank corrosion and water logging problems. The system should include airvent and complete as per technical specification. Tank shall be selected for 125 psi (200 ltr)
Supply, Installing, Testing and commissioning of The pressurization unit shall consist of two nos. (1 working + 1 stand-by) high pressure pumps of suitable pressure rating mounted on M.S. frame, complete with interconnecting piping, isolation valves, NRV, Y-strainer, pressure gauge, pressure transmitter, auto-logic panel (IP 55) with dry-run protection, electrical MCB and interconnecting wiring. The unit shall be housed in powder-painted canopy suitable for external installation conforming to the specifications. The Pump Shall be BMS Compatible.
4
-
209221.66
AIR & DIRT SEPARATOR
Supply, installation, testing, balancing and commissioning of centrifugal type air separator with required Support & Foundation for design water flow rate with a maximum pressure loss of 1 feet water gauge. The unit shall have Flanged inlet and outlet connections tangential to the vessel shell. Vessel shell diameter to be three times the nominal inlet/outlet pipe diameter. The unit shall have an internal stainless steel air collector tube. Manufacturer to furnish data sheet specifying air collection efficiency and pressure drop at rated flow. The shell shall be fabricated as per IS standard for “non-fired pressure vessels” and the flanges shall be as per IS 6392-1971.. For chilled water application, it will be insulated with 50 mm thick insulation to the specifications and cladded with 26G-aluminium cladding.. Install Air separator in accordance with manufacturer’s written instructions.
(The Air Separator Size is to be Calculated & validated by the contractor before ordering.)
300 mm dia.
1
-
130124.64
200 mm dia.
1
-
77482.22
150 mm dia.
1
-
57135.77
80 mm dia.
1
-
44540.34
Restrained spring vibration isolator of approved make required for following equipment .
For Chiller
96
-
5952.18
Restrained spring vibration isolator of approved make required for following equipment .
For Heat pump
36
-
5952.18
Condenser water piping Supply, Installation, Testing ,Commissioning & Water-Balancing of Condenser water piping with 3 mm thick FRP coating for piping outside the building
Supplying, fixing, testing and commissioning of condenser water pipes of following nominal sizes of MS 'C' class along with necessary coupling, clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specifications and as required complete in all respect.
Note:- The pipes size 150 mm & below shall be M.S. `C' class as per IS:1239 and pipes size above 150 mm shall be black steel pipe heavy class as per IS:3589, from minimum 6.35 mm thick M.S. sheet for pipes upto 350 mm dia. and from minimum 7 mm thick MS sheet for pipes of 400 mm dia and above.
300 mm dia.
72
-
9430
250 mm dia.
60
-
7934
200 mm dia.
132
-
5909
150 mm dia.
60
-
3815
125 mm dia.
186
-
2574.6
100 mm dia.
36
-
2206.8
80 mm dia.
10
-
2059.68
50 mm dia.
170
-
1912.56
40 mm dia.
1329
-
1618.32
Supply, Installation, Testing ,Commissioning & Water-Balancing of Condenser water piping without FRP coating
Supplying, fixing, testing and commissioning of condenser water pipes of following nominal sizes of MS 'C' class along with necessary coupling, clamps, vibration isolators and fittings such as bends, tees etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specifications and as required complete in all respect.
Note:- The pipes size 150 mm & below shall be M.S. `C' class as per IS:1239 and pipes size above 150 mm shall be black steel pipe heavy class as per IS:3589, from minimum 6.35 mm thick M.S. sheet for pipes upto 350 mm dia. and from minimum 7 mm thick MS sheet for pipes of 400 mm dia and above.
300 mm dia.
180
-
5270
250 mm dia.
60
-
4401
200 mm dia.
162
-
3705
150 mm dia.
108
-
2385
125 mm dia.
426
-
2087
100 mm dia.
276
-
1784
80 mm dia.
168
-
1471.2
65 mm dia.
2166
-
1324.08
50 mm dia.
630
-
1103.4
40 mm dia.
2769
-
1103.4
Supply, Installation, Testing ,Commissioning & Water-Balancing of Valves & Fittings Butterfly Valves (MANUAL) with CI body SS disc nitrile rubber seal & O - ring & PN 16 pressure rating as specified.
300 mm dia.
12
-
24755.56
250 mm dia.
6
-
17847.03
200 mm dia.
110
-
11531
150 mm dia.
11
-
5442
125 mm dia.
214
-
4797
100 mm dia.
18
-
4120
50 mm dia.
404
-
2544
Motorised Butterfly Valves with CI body SS disc nitrile rubber seal & O - ring & PN 16 pressure rating, confirm to BS 5155, IS 13095, with IP-55 actuator, capable of accepting up to 10V DC and upto 20mA electric signal and providing similar transduced feed back output to control system as required & as specified.
300 mm dia.
1
-
94059
250 mm dia.
1
-
67718
200 mm dia.
1
-
51795
150 mm dia.
1
-
40154
125 mm dia.
3
-
39809
100 mm dia.
3
-
39070
50 mm dia.
1
-
16206
Balancing Valves WITH BUILTIN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled water circulation as specified. 300 mm dia.
1
-
120899.23
250 mm dia.
1
-
91998.55
200 mm dia.
22
-
51698.81
150 mm dia.
1
-
24755.56
125 mm dia.
41
-
18307.6
100 mm dia.
9
-
13241.34
50 mm dia.
133
-
6897.29
40 mm dia.
189
-
4893.54
NON-RETURN Valves (Dual Plate) of CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified.
200 mm dia.
22
-
12181
150 mm dia.
1
-
7171
125 mm dia.
38
-
6147
100 mm dia.
6
-
4581
Supply, Installation, Testing, Commissioning of 3 Way Pressure Independent control valve. 125 mm dia.
2
-
147999.75
Y Strainer of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation as specified.-
200 mm dia.
22
-
21330
150 mm dia.
1
-
13129
125mm dia.
38
-
10627.04
100 mm dia.
6
-
8500
50 mm dia.
133
-
4250
40 mm dia.
201
-
2665.52
Ball Valves (Manual) with brass body SS Ball, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water circulation as specified. 40 mm dia.
694
-
2095.02
32 mm dia.
21
-
1450.51
25 mm dia.
407
-
886.03
Supply, installation, testing and commissioning of following sizes electronic, self-balancing, pressure independent type dynamic balancing valve with integrated 2 way modulating control valve in a single body. The actuator shall be capable of accepting upto 10V DC and upto 20 mA electric signal and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm valves and 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar minimum.
32 mm dia.
12
-
16038
Pressure Gauge 6" Dial ( 0 To 6 Kg/CM2 ) with approved ball valve. Industrial type pressure gauges with SS syphon, gun metal / brass valves complete as required
814
-
1094
Providing and fixing in position the 6" Dial Type Thermometers for temperature measurement.
790
-
957
U PVC Drain Piping as per specifications ( For Cooling tower Drain)
25 mm dia.
250
-
202.29
50 mm dia.
402
-
220.68
65 mm dia.
204
-
294.24
Pot strainer for cooling tower 300 mm dia.
4
-
71858.51
250 mm dia.
3
-
51673.54
200 mm dia.
1
-
28258.97
150 mm dia.
13
-
17762.78
125 mm dia.
8
-
12595.42
100 mm dia.
1
-
10173.23
Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping as per IS 12436 STD dully insulated with 42± 2Kg/Cu mt density PUF Insulation duly covered by HDPE jacket 2-3 mm minimum thickness of jacket with HDPE density of 900-960 kg/m3 & necessary clamps, vibration isolators and fittings, Excluding valves strainers, gauges. Including repairing of damages to the building complete as per specification, drawing etc as per requirement. Note:-The Pipes of sizes 150 mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.
300 mm dia.
90
-
8224.24
200 mm dia.
420
-
6334.22
150 mm dia.
630
-
4329.06
125 mm dia.
498
-
3862.88
100 mm dia.
2396
-
3430.39
80 mm dia.
1024
-
3044.25
65 mm dia.
948
-
2839.24
50 mm dia.
1752
-
2583.68
40 mm dia.
786
-
2366.03
32 mm dia.
750
-
2250.89
25 mm dia.
552
-
2124.51
20 mm dia.
36
-
1964.44
Supplying, fixing, testing and commissioning of following Pre-Insulated valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.
BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/ hot eater circulation as specified
200 mm dia.
6
-
15834.85
150 mm dia.
17
-
10821.96
125 mm dia.
4
-
9656.49
100 mm dia.
12
-
8575.28
80 mm dia.
22
-
7610.61
65 mm dia.
22
-
7098.09
50 mm dia.
30
-
6459.19
Ball Valves (Manual) with brass body SS Ball, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot water circulation as specified. 40 mm dia.
60
-
5914.37
32 mm dia.
84
-
5626.52
25 mm dia.
88
-
5310.58
Chilled water piping
Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building with Insulation of following pipe sizes.with following thickness closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class ‘O’ insulation applied by suitable adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect.(with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) Note:-The Pipes of sizes 150 mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.
300 mm dia. (32 mm thick insulation)
240
-
7475
250 mm dia. (32 mm thick insulation)
10
-
6248
200 mm dia. (32 mm thick insulation)
90
-
5301
150mm dia. (32 mm thick insulation)
174
-
3452
125mm dia. (32 mm thick insulation)
216
-
2904
100mm dia. (32 mm thick insulation)
10
-
2517
80 mm dia. (32 mm thick insulation)
510
-
2010
65 mm dia. (32 mm thick insulation)
208
-
1717
50 mm dia. (32 mm thick insulation)
1035
-
1455
40 mm dia. (32 mm thick insulation)
686
-
1273
32 mm dia. (19 mm thick insulation)
1741
-
1117
25 mm dia. (19 mm thick insulation)
3786
-
1022
Butterfly Valves (MANUAL) with CI body SS disc nitrile rubber seal & O - ring & PN 16 pressure rating as specified.
300 mm dia.
6
-
10168.44
250 mm dia.
1
-
9831
200 mm dia.
14
-
12838
150 mm dia.
30
-
6556
125 mm dia.
11
-
5861
100 mm dia.
18
-
5169
80 mm dia.
1
-
3691
65 mm dia.
11
-
3436
50 mm dia.
108
-
3167
Motorised Butterfly Valves with CI body SS disc nitrile rubber seal & O - ring & PN 16 pressure rating, confirm to BS 5155, IS 13095, with IP-55 actuator, capable of accepting up to 10V DC and upto 20mA electric signal and providing similar transduced feed back output to control system as required & as specified.
300 mm dia.
1
-
84996.77
250 mm dia.
1
-
76279.15
200 mm dia.
1
-
50889.09
150 mm dia.
2
-
43794.62
125 mm dia.
6
-
37104.36
100 mm dia.
3
-
35687.74
80 mm dia.
10
-
33150
Motorised Balancing Valves WITH BUILTIN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled water circulation as specified.
150 mm dia.
11
-
166586
125 mm dia.
6
-
139560
100 mm dia.
6
-
95560
50 mm dia.
1
-
57474
40 mm dia.
1
-
28575
Supply, installation, testing and commissioning of following sizes electronic, self-balancing, pressure independent type dynamic balancing valve with integrated 2 way modulating control valve in a single body. The actuator shall be capable of accepting upto 10V DC and upto 20 mA electric signal and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm valves and 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar minimum.
65 mm dia.
2
-
71774
50 mm dia.
26
-
45615.44
40 mm dia.
18
-
39153.25
32 mm dia.
18
-
37632.74
25 mm dia.
27
-
31930.81
NON-RETURN Valves (Dual Plate) of CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified.with 32 mm thick closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class ‘O’ insulation applied by suitable adhesive as per specifications and as required duly insulated to the same specifications as the connected piping and adequately supported as per specifications.
150 mm dia.
13
-
8296
125 mm dia.
1
-
7122
100 mm dia.
6
-
5494
Supply, installation, testing and commissioning of following sizes Ball valves with Y-strainer assembly with 32 mm thick closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class ‘O’ insulation applied by suitable adhesive as per specifications and as required duly insulated to the same specifications as the connected piping and adequately supported as per specifications.
32 mm dia.
30
-
2230.09
25 mm dia.
11
-
2093.24
Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled water circulation with 32 mm thick closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class ‘O’ insulation applied by suitable adhesive as per specifications and as required duly insulated to the same specifications as the connected piping and adequately supported as per specifications.
150 mm dia.
13
-
14758
125 mm dia.
1
-
13912
100 mm dia.
6
-
9821
80 mm dia.
1
-
7123
65 mm dia.
3
-
6207
50 mm dia.
27
-
5033
40 mm dia.
22
-
3565
32 mm dia.
16
-
1471.2
Supply, installation, testing and commissioning of following sizes Ball valves with 32 mm thick closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class ‘O’ insulation applied by suitable adhesive as per specifications and as required duly insulated to the same specifications as the connected piping and adequately supported as per specifications.
40 mm dia.
70
-
2401.15
32 mm dia.
65
-
2230.09
25 mm dia.
150
-
2093.24
Supply, Installation, Testing, Commissioning of 3 Way Pressure Independent control valve. 300 mm dia.
2
-
515200
200 mm dia.
6
-
284716.36
Pressure Gauge 6" Dial ( 0 To 6 Kg/CM2 ) with approved ball valve.Industrial type pressure gauges with SS syphon, gun metal / brass valves complete as required
210
-
1094
Providing and fixing in position the Automatic Air Purge Valves having threaded connection with required fitting as per standard design.
156
-
1500
Providing and fixing in position the 6" Dial Type Thermometers for temperature measurement.
172
-
957
6" Dial Type Thermometers (0 To 50OC) with SS Thermowell
132
-
1607.09
Supply & fixing of UPVC drain piping with all fitting such as bends, tees etc. necessary clamps, adequate support duly insulate with 13 mm nitrile rubber insulation complete as per specifications, requirement, standard and drawings. Working pressure 6 kgf/m2 .
50 mm dia.
10
-
414
40 mm dia.
10
-
216
32 mm dia.
1467
-
176
25 mm dia.
7594
-
134
HOT WATER PIPING
HOT Water Piping With MS “C” Class Pipe Complete With All Accessories Such As Bends, Elbow, Flanges, Nut Bolts, Air Purging Valves, De-scaling Tee With M.S. Angle & Rod Supporting Work Etc. Of Following Sizes:
Note:- The pipes size 150 mm & below shall be M.S. `C' class as per IS:1239 and pipes size above 150 mm shall be black steel pipe heavy class as per IS:3589, from minimum 6.35 mm thick M.S. sheet for pipes upto 350 mm dia. and from minimum 7 mm thick MS sheet for pipes of 400 mm dia and above.
200 mm dia. (32 mm thick insulation)
240
-
5301
150mm dia. (32 mm thick insulation)
30
-
3452
100mm dia. (32 mm thick insulation)
190
-
2517
80 mm dia. (32 mm thick insulation)
210
-
2010
65 mm dia. (32 mm thick insulation)
108
-
1717
50 mm dia. (32 mm thick insulation)
756
-
1455
40 mm dia. (32 mm thick insulation)
606
-
1273
32 mm dia. (19 mm thick insulation)
1410
-
1117
25 mm dia. (19 mm thick insulation)
3336
-
1022
Butterfly Valves (MANUAL) with CI body SS disc nitrile rubber seal & O - ring & PN 16 pressure rating as specified.
200 mm dia.
19
-
12838
150 mm dia.
2
-
6556
125 mm dia.
11
-
5861
100 mm dia.
1
-
5169
80 mm dia.
1
-
3691
65 mm dia.
8
-
3436
50 mm dia.
64
-
3167
Motorised Butterfly Valves with CI body SS disc nitrile rubber seal & O - ring & PN 16 pressure rating, confirm to BS 5155, IS 13095, with IP-55 actuator, capable of accepting up to 10V DC and upto 20mA electric signal and providing similar transduced feed back output to control system as required & as specified.
150 mm dia.
1
-
48532.4
125 mm dia.
3
-
41118.37
100 mm dia.
1
-
39548.51
Motorised Balancing Valves WITH BUILTIN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled water circulation as specified. 200 mm dia.
3
-
378268.54
150 mm dia.
1
-
184607.92
125 mm dia.
10
-
154658.33
100 mm dia.
1
-
105898.45
Supply, Installation, Testing, Commissioning of 2 Way Pressure Independent control / Balancing Valve for following sizes. The actuator shall be capable of accepting upto 10V DC and upto 20 mA electric signal and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm valves and 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar minimum. 65 mm dia.
2
-
69162
50 mm dia.
16
-
45615.44
40 mm dia.
1
-
39153.25
32 mm dia.
9
-
41703.91
25 mm dia.
1
-
35385.14
NON-RETURN Valves (Dual Plate) of CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified.
200 mm dia.
3
-
13504
150 mm dia.
1
-
8296
125 mm dia.
4
-
7122
100 mm dia.
1
-
5494
Supply, installation, testing and commissioning of following sizes Ball Valve with Y-strainer set
32 mm dia.
9
-
2471.34
25 mm dia.
1
-
2319.69
Y Strainer of Ductile CI Body flanged ends with stainless steel strainer for hot water circulation as specified.-
200 mm dia.
3
-
28872
125 mm dia.
4
-
13912
65 mm dia.
2
-
6207
50 mm dia.
16
-
5033
40 mm dia.
1
-
3565
Ball Valves (Manual) with brass body SS Ball, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for hot water circulation as specified. 40 mm dia.
1
-
2660.91
32 mm dia.
27
-
2471.34
25 mm dia.
42
-
2319.69
Pressure Gauge 6" Dial ( 0 To 6 Kg/CM2 ) with approved ball valve. Industrial type pressure gauges with SS syphon, gun metal / brass valves complete as required
76
-
1094
Providing and fixing in position the Automatic Air Purge Valves having threaded connection with required fitting as per standard design.
54
-
1500
Providing and fixing in position the 6" Dial Type Thermometers for temperature measurment.
62
-
957
6" Dial Type Thermometers (0 To 50OC) with SS Thermowell
54
-
1607.09
U PVC Drain Piping as per specifications 40 mm dia.
10
-
220.68
32 mm dia.
120
-
220.68
25 mm dia.
24
-
183.9
In-door units Floor standing FCU
supply, Installation, Testing & Commissioning off floor standing low static fan coil units with equipped with adequate sized multi-row chilled water coil, 3 speed fan motor along with its accessories and factory fitted ball valve, ball valve with y strainer set & 2 way pressure independent control / balancing valve of PN 16 Rating duly insulated with Closed Cell Elastomeric Rubber insulation with Extended drain pan & Fire Retardant Quality Flexible Canvas connection between FCU & Duct suitable for following capacities of units. Complete as per specification & drawings. The unit shall be with 2-pipe connection supplied along with its relevant control device with digital display of temperature and other parameters for Heating/cooling application. (ESP-3MM for Ducting length 1.1M- 3.0 M, noise level ≤ 38 Db at 2 M distance from unit). The unit shall have the provision to be connected via BMS for both control and monitoring purposes, additional items required may be specified.
0.75 TR
33
-
31593.87
1.0 TR
278
-
31593.87
1.5 TR
106
-
33700.13
2.0 TR
58
-
35806.39
2.25 TR
77
-
38614.74
Ceiling suspended FCU
supply, Installation, Testing & Commissioning of Ceiling Suspended low static fan coil units with equipped with adequate sized multi-row chilled water coil, 3 speed fan motor along with its accessories and factory fitted ball valve, ball valve with y strainer set & 2 way pressure independent control / balancing valve of PN 16 Rating duly insulated with Closed Cell Elastomeric Rubber insulation with Extended drain pan & Fire Retardant Quality Flexible Canvas connection between FCU & Duct suitable for following capacities of units. Complete as per specification & drawings. The unit shall be with 2-pipe connection supplied along with its relevant control device with digital display of temperature and other parameters for Heating/cooling application. (ESP-3MM for Ducting length 1.1M- 3.0 M, noise level ≤ 38 Db at 2 M distance from unit). The unit shall have the provision to be connected via BMS for both control and monitoring purposes, additional items required may be specified.
1.0 TR
5
-
11300
1.5 TR
1
-
12600
2.0 TR
75
-
22326.34
2.5 TR
56
-
28364.28
3.0 TR
1
-
32000
Treated Fresh air unit 6.0 TR /800 CFM with 50 mm static
2
-
97028.3
8.0 TR /1000 CFM with 50 mm static
4
-
98713.31
10.0 TR /1300 CFM with 50 mm static
2
-
101240.82
DEVAP 26 TR /3900 CFM (Chilled water coil-18.2 TR +7.8 TR & Hot water coil-18.6 TR )
2
-
1937757.63
24 TR /3600 CFM (Chilled water coil-16.8 TR +7.2 TR & Hot water coil-17.2 TR )
1
-
1937757.63
22 TR /3300 CFM (Chilled water coil-15.4 TR +6.6 TR & Hot water coil-15.7 TR )
4
-
1662539.88
18 TR /2700 CFM (Chilled water coil-12.6 TR +5.4 TR & Hot water coil-12.9 TR )
8
-
1623223.06
14 TR /2100 CFM (Chilled water coil-9.8 TR +4.2 TR & Hot water coil-10.0 TR )
2
-
1396308.83
7 TR /1050 CFM (Chilled water coil-4.9 TR +2.1 TR & Hot water coil-5.0 TR )
4
-
1116597.73
6 TR / 900 CFM (Chilled water coil-4.2 TR +1.8 TR & Hot water coil-4.3 TR )
4
-
1116597.73
Floor mounted Air Handling unit with heat recovery wheel
9.0 TR/4600CFM, 65MM STATIC for Basket ball & badminton
3
-
265388.54
6.0 TR/3070CFM, 65MM STATIC for Basket ball & badminton
3
-
193775.76
4 TR /900 CFM CFM with 50 mm static for dining seating area
2
-
120000
Ceiling Suspended Air Handling Unit
Ceiling Suspended Double Skin Air Handling Units with 25mm thk. PUF insulated Panels with Aluminium anodised construction and thermal break profile with IMPORTED FANS, adequate sized multi-row chilled water coil for cooling application with Plug type fan with VFD with Extended drain pan of 1.2mm thick S.S.304 with 19mm thick rubber form Insulation As Per Specification & of Following Capacities With 20G G.I.Plain Inner & 24G G.I. outer pre-coated with Opposed blade Aerofoil design low leakage Aluminium anodized. The unit shall be supplied along with its relevant control device with digital display of temperature and other parameters for cooling application. . The unit shall have the provision to be connected via BMS for both control and monitoring purposes, additional items required may be specified.
3.28TR/1647CFM, 40MM STATIC for Squash court-1
1
-
160075.63
3.28TR/1647CFM, 40MM STATIC for Squash court-2
1
-
160075.63
12.99TR/5974CFM, 40MM STATIC for Gym
1
-
282238.61
3.95TR/1760CFM, 40MM STATIC for Lounge
1
-
161479.8
6.16TR/2858CFM, 40MM STATIC for Table tennis
1
-
178329.87
3.6TR/1644CFM, 40MM STATIC for spectators gallery
1
-
161479.8
5.06TR/1845CFM, 40MM STATIC for Sitout
1
-
162883.97
3.11TR/1600CFM, 40MM STATIC for Café
1
-
157267.29
4.78TR/2129CFM, 40MM STATIC for Billiords/pool
1
-
164288.15
2.91TR/1560CFM, 40MM STATIC for coaches room & first aid
1
-
157267.29
2.34TR/1245CFM, 40MM STATIC for Administration
1
-
136204.7
Evaporative Cooling System
5000 CFM/ 35 MM STATIC for open Stupa area
2
-
491881.52
AIR DISTRTIBUTION SYSTEM
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gasket, elbows, splitter, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
Thickness 0.63 mm sheet (24G)
3247
-
983
Thickness 0.80 mm sheet (22G)
1344
-
1154
Thickness 1.00 mm sheet (20G)
192
-
1273
Thickness 1.25 mm sheet (18G)
12
-
1677
Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gasket, elbows, splitter, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
Thickness 0.63 mm sheet (24G)
813
-
942
Thickness 0.80 mm sheet (22G)
338
-
1104
Thickness 1.00 mm sheet (20G)
48
-
1458
Thickness 1.25 mm sheet (18G)
3
-
1615
Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc., as per specifications.
17.5
-
6500
Supply, installation, testing and commissioning of Motorized (ON-OFF Type) duct mounted GI volume control damper integrated with necessary control wire. (minimum 1.5 sq.mm ) for integration within AHU room.
Damper
21
-
7951
Actuator
192
-
7960
Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.
31
-
8480
Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.
84
-
5507
Jet Nozzle-300dia
24
-
3976.62
Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminium sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications.
651
-
647
Supplying, fixing acoustic lining on wall and ceiling of AHU rooms with 50 mm thick, density 32 kg/cubic meter resin bonded glass fibre insulation friction fixed in 610 mm x 610 mm frame work made of 25X50X50X50X25 mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fibre glass tissue and finished with 0.80 mm perforated aluminium sheet etc. complete as required and as per specifications.
687
-
1139
Supplying and fixing of following thickness duly laminated aluminium foil of mat finish closed cell Nitrile rubber (Class “O”) insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.
19 MM THK
4295
-
697
25 MM THK
325
-
896
WATER COOLED VRV system OUTDOOR UNIT Supply, installation, testing and commissioning of Modular type outdoor units equipped with highly efficient inverter scroll compressors, eco-friendly refrigerant R410a, special acryl precoated heat exchanger, Water Cooled Condenser, auto check function for connection error, auto address setting, with capacities as mentioned below.
12 HP
3
-
505201.5
10 HP
28
-
291652.18
8 HP
119
-
271878.63
6 HP
184
-
252600.75
INDOOR UNIT Supply of Indoor units equipped with prefilter, fan section with low noise fan, multispeed motor, coil section with DX coil, outer cabinet, drain pan, insulation, pipe connections etc. of various capacities as per drawings
HI-WALL/ Hide Away Unit
2.1 TR
213
-
25134.68
1.66 TR
823
-
23590.09
1.33 TR
37
-
19517.99
1.0 TR
28
-
19517.99
0.83 TR
62
-
18956.32
Supply, installation, testing and commissioning of different size Refrigerant Piping and their interconnection as per OEM designer for the full functionality of the VRF system including refnet joints, Y-joints, i/c all necessary accessories as required, suitable support structure, suitable size cable tray (duly covered for carrying refrigerant piping & associated cables) etc. complete in all respects duly insulated with closed cell nitrile rubber of 13/19 mm thick as per OEM designer with UV treated protection/28 G Al. foil cladding as per specifications of the manufacturer. The contractor shall submit a detailed drawing approved by the manufacturer OEM designer showing the piping sizes & layout to be followed at the site with the tender document. The contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the engineer-in-charge in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRF system including Testing & Commissioning charges along with topping-up of refrigerant including Load Manager/ advance control system for billing purpose
1
-
12500000
VENTILATION SYSTEM
Supply, installation, testing and commissioning of industrial type propeller fan for exhaust air complete with in and out louvers, as per specifications, requirement, standard and drawings.
400 CFM with 6 mm static
9
-
6207.5
300 CFM with 6 mm static
3
-
5172.92
200 CFM with 6 mm static
6
-
4984.81
150 CFM with 6 mm static
337
-
4984.81
100 CFM with 6 mm static
985
-
2804.13
Inline Fans
Supply , installation , testing and commissoning , of duct mounted inline fans complete with direct driven centrifugal fan , TEFC squirrel cage induction motor , with efficiency class IE-3 whichever is higher , direct drive arrangement , heavy gauge sheet metal casing , rubber isolator mounts and other accessories.The fan shall be complete in all respect and should match the specification ,Drawings and Schedule. Inline fans shall be of following capacities.
1000 CFM with 20 mm static
1
-
19405.66
900 CFM with 20 mm static
1
-
19405.66
800 CFM with 20 mm static
9
-
17675.35
600 CFM with 6 mm static
15
-
14458.76
400 CFM with 6 mm static
14
-
9716.87
300 CFM with 6 mm static
6
-
8844.96
200 CFM with 6 mm static
2
-
8523.33
150 CFM with 6 mm static
310
-
7593.76
Supply, installation, testing & commissioning of Floor Mounted Single skin Cabinet Type Fresh air Units with DIDW type forward curved fan as per specification and of following capacities with Built-In Drive And Drive Package, Bird screen protection with gravity louvers.
25000 CFM With 30 MM static for dining area
3
-
157688.54
1600 CFM With 30 MM static for pump rooms Hostel
7
-
26843.56
2800 CFM With 30 MM static for pump rooms Hostel
2
-
48792.18
4800 CFM With 30 MM static for pump rooms Bungalow & Apartment
3
-
58368.63
20000 CFM With 30 MM static for pump rooms Dinning & NU School
2
-
280307.87
24000 CFM With 30 MM static for pump rooms AS
2
-
157688.54
15000 CFM With 30 MM static for AS dinning area
2
-
215666.81
Supply, installation, testing & commissioning of Floor Mounted Single skin Cabinet Type Exhaust air Units with DIDW type forward curved fan as per specification and of following capacities with Built-In Drive And Drive Package, Bird screen protection with gravity louvers.
650 CFM With 15 MM static
6
-
15407.98
1000 CFM With 30 MM static for pump Faculty Club
1
-
20000
2000 CFM With 30 MM static for pump rooms Hostel
7
-
27862.99
3500 CFM With 30 MM static for pump rooms Hostel
2
-
50675.17
6000 CFM With 30 MM static for pump rooms Bungalow & Apartment
3
-
95503.37
25000 CFM With 30 MM static for pump rooms Dinning & NU School
2
-
324876.3
30000 CFM With 30 MM static for pump rooms AS
2
-
421988.85
Supply, installation, testing & commissioning of Centrifugal fan shall be SISW Class having bearings on both the sides, Fan Wheel shall be backward-curved non-over loading type. Fan wheel and housing shall be statically and dynamically balanced.Fan motor shall be energy efficient and suitable for 415±10% volts, 50 cycles, 3 phase AC power supply, squirrel-cage, totally enclosed, fan-cooled motor, provided with class F insulation, motor speed shall not exceed 1440 rpm. 15000 CFM With 30 MM static for dining area (CI& IC)
6
-
215666.81
1000 CFM With 30 MM static for Faculty Club Kitchen area
1
-
194941.23
Supply Installation testing and commissioning Dry scrubber Unit for Kitchen as per following details & capacities:
Dry scrubber having Electrostatic Air cleaners section, Ionizing-Collecting cell(s),2 LED lights for status, Ozone generating UVC lamps having minimum 25 watts per 1000 CFM of exhaust air quantity, Lamp life shall be minimum 9000 hours, with drop in efficiency not more than 20% at the end of the life cycle.
7500 CFM With 50 pa static for dining area
12
-
603794.04
1000 CFM With 50 pa static for Faculty club dining area
1
-
161479.8
SECTION - 1.0 ELECTRICAL PANELS INSTALLATION- SUPPLY & INSTALLATION
Supplying, installation, testing and commissioning of Indoor floor/wall mounted modular,sectionalised, compartmentalized, extendable type MV cubicle panel having 31 MVA breaking capacity of suitable size fabricated from CRCA steel of 2 mm thick for frame work, enclosure and doors, 3 mm thick for gland plates with stiffeners wherever required, having vibration free structure chemically treated with seven tank process before painting for surface treatment and powder coated, with suitable electrolytic grade high conductivity Copper busbar extensible type, DMC/SMC busbar supports, suitable for 3 phase 415 V 50 HZ AC supply i/c providing and fixing the following switchgear mounted thereon complete with gaskets and interconnections, connections as per specifications complete as required. (The board shall be dust & vermin proof with degree of protection of IP 42 as per IS : 12063, free standing type, mounted on base channel of MS Section not less than 100 mm X 50 mm X 5 mm). Control Transformer of 240/24V AC must be provided to each panel outgoing feeder
1) All MCCBs of current rating 250 Amps & above 250 Amps shall be provided with microprocessor based releases and those of rating Below 250 Amps rating shall be provided with thermal magnetic releases or as specified in SOQ / BOQ
2) All MCCBs shall be having Ics = 100% Icu
3) All MCCBs shall be provided with front rotary handle and spreader links.
Scope of Job- including required tools / manpower / if require hydra / crane for shifting of panel
SUPPLY RATES QUOT AS PER SPECIFICATION & SLD /DATA SHEET GIVEN IN SPECIFICATION PART POWER PANEL/PCC/MCC/PANEL INSTALLATION - SIZE OF PANEL given in BOQ is for reference only
HVAC Panel ‐ 1 ( Acadamic Spine Plant Room ) ( L= 6500mm , D=1000mm, H=2375mm)
Incomer - 1 & 2- 2 Set
3200A FP EDO ACB with microprocessor based O/L, S/C & E/F protection release [65KA] [Elec+Mech Locking],Auxi.Contactor [2NO+2NC],TNC Switch,Digital Multifunction Meter wirh RS485 Comm. Port
0-3200A Analog Ammeter, Cl-1 [Size:- 96x96mm],Ammeter Selector Switch,3200/5A, Class-1.0, 15VA C.Ts. For Metering,0-500V Analog Voltmeter, Cl-1 [Size:- 96x96mm],Voltmeter Selector Switch,Indication Lamp [R,Y,B,On],415V/230V AC Control Transformer.,32A TP MCB For Trans. I/P & O/P Side,2A SP MCB [10KA],
Incomer - 3 - 1 Set
1000A FP EDO ACB with microprocessor based O/L, S/C & E/F protection release [65KA] [Elec+Mech Locking],Auxi.Contactor [2NO+2NC],TNC Switch,Digital Multifunction Meter wirh RS485 Comm. Port,0-1000A Analog Ammeter, Cl-1 [Size:- 96x96mm],Ammeter Selector Switch,1000/5A, Class-1.0, 15VA C.Ts. For Metering,0-500V Analog Voltmeter, Cl-1 [Size:- 96x96mm]
Voltmeter Selector Switch,Indication Lamp [R,Y,B,On],415V/230V AC Control Transformer.,32A TP MCB For Trans. I/P & O/P Side,2A SP MCB [10KA],
BUSCOUPLER - 1
3200A FP EDO ACB with microprocessor based O/L, S/C & E/F protection release [65KA] [Elec+Mech Locking],Auxi.Contactor [2NO+2NC],TNC Switch,Indication Lamp [R,Y,B],2A SP MCB [10KA]
Busbar
A Set of 3200A Alluminium Busbar for TPN System Suitable & Complete with Heat Shrinkable Sleeves, Epoxy Supports & Hardware [Density:- 0.64A/mm²]
Outgoing 630A MCCB Feeder consisting of following - 5 nos.
630A FP MCCB with microprocessor based O/L, S/C protection release [35KA] + ROM + Spreader Link ,Digital Multifunction Meter wirh RS485 Comm. Port ,600/5A, Class-1, 15VA C.Ts. For Metering,Indication Lamp [On],Control Fuse base with Link, 400A MCCB Feeder consisting of following - 8nos.
400A FP MCCB with microprocessor based O/L, S/C protection release [35KA] + ROM + Spreader Link, Digital Multifunction Meter wirh RS485 Comm. Port , 400/5A, Class-1, 15VA C.Ts. For Metering,Indication Lamp [On],Control Fuse base with Link, 250A MCCB Feeder consisting of following - 2 nos.
250A FP MCCB with microprocessor based O/L, S/C protection release [35KA] + ROM + Spreader Link ,Digital Multifunction Meter wirh RS485 Comm. Port ,250/5A, Class-1, 15VA C.Ts. For Metering,Indication Lamp [On],Control Fuse base , 100A MCCB Feeder consisting of following - 1 nos.
100A FP MCCB with microprocessor based O/L, S/C protection release [35KA] + ROM + Spreader Link ,Digital Multifunction Meter wirh RS485 Comm. Port ,100/5A, Class-1, 15VA C.Ts. For Metering,Indication Lamp [On],Control Fuse base
63A MCCB Feeder consisting of following - 1 nos.
63A FP MCCB with microprocessor based O/L, S/C protection release [35KA] + ROM + Spreader Link ,Digital Multifunction Meter wirh RS485 Comm. Port ,63/5A, Class-1, 15VA C.Ts. For Metering,Indication Lamp [On],Control Fuse base
15KW VFD with Bypass S/D Starter Feeder consisting of following- 6 nos
63A TP MCCB with motor back up protection,32A TP Contactor,0-20A Electronic MPR,15KW VFD Auxiliary Contactor
Digital Multifunction Meter wirh RS485 Comm. Port , 60/5A, Class-1, 15VA C.Ts. For Metering, S/D Timer, Local/Remote Selector Switch, VFD/S/D Bypass Selector Switch
Push Button [Start,Stop,Speede Decrease,Speed Increase,Reset], Indication Lamp [On,Off Trip]
Cooling Fan
Control Fuse base with Link, 7.5KW S/D Starter Feeder consisting of following - 10 nos., 63A TP MCCB with motor back up protection
32A TP Contactor, 12A TP Contactor, 0-20A Electronic MPR,Auxiliary Contactor,Digital Multifunction Meter wirh RS485 Comm. Port ,60/5A, Class-1, 15VA C.Ts. For Metering
S/D Timer, Local/Remote Selector Switch, Push Button [Start,Stop], Indication Lamp [On,Off Trip], Control Fuse base with Link
1
-
3950121
TYPICAL APPARTMENT COOLING TOWER PANEL -1 ( L= 3500mm , D=600mm, H=2175mm)
Incomer 1 & 2 2
250A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock],Auxi Contactor [2NO+2NC],Digital Multifunction Meter wirh RS485 Comm. Port,250/5A, Class-1.0, 15VA C.Ts. For Metering,Indication Lamp [On],415V/230V AC Control Transformer.,32A TP MCB For Trans. I/P & O/P Side,Control Fuse base with Link
BUSCOUPLER 1
250A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock],Auxi Contactor [2NO+2NC],Indication Lamp [On],Control Fuse base with Link
Busbar
A Set of 250A Alluminium Busbar for TPN System Suitable & Complete with Heat Shrinkable Sleeves, Epoxy Supports & Hardware [Density:- 0.64A/mm²] Outgoing
32.8KW S/D Starter Feeder consisting of following 4 nos,100A TP MCCB [10KA],80A TP Contactor,0-60A Electronic MPR,Auxiliary Contactor,S/D Timer,Local/Remote Selector Switch,Push Button [Start,Stop],Indication Lamp [On,Off Trip],Control Fuse base with Link 10HP S/D Starter Feeder consisting of following 4 nos,
40A TP MCB [10KA],32A TP Contactor,0-20A Electronic MPR,Auxiliary Contactor,S/D Timer,Local/Remote Selector Switch,Push Button [Start,Stop],Indication Lamp [On,Off Trip]
Control Fuse base with Link 10HP S/D Starter Feeder consisting of following 1
63A TP MCB [10KA],38A TP Contactor,0-20A Electronic MPR,Auxiliary Contactor,S/D Timer,Local/Remote Selector Switch,Push Button [Start,Stop],Indication Lamp [On,Off Trip]
Control Fuse base with Link
63A MCB Feeder consisting of following 4 nos.
63A TP MCB [10KA],Indication Lamp [On],Control Fuse base with Link
32A MCB Feeder consisting of following 3
32A TP MCB [10KA],Indication Lamp [On],Control Fuse base with Link
1
-
424053
TYPICAL APPARTMENT COOLING TOWER PANEL -2 ( L= 2800mm , D=600mm, H=2175mm)
Incomer 1 & 2
250A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock]
Auxi Contactor [2NO+2NC]
Digital Multifunction Meter wirh RS485 Comm. Port, 250/5A, Class-1.0, 15VA C.Ts. For Metering, Indication Lamp [On], 415V/230V AC Control Transformer.
32A TP MCB For Trans. I/P & O/P Side, Control Fuse base with Link, BUSCOUPLER
250A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock], Auxi Contactor [2NO+2NC], Indication Lamp [On], Control Fuse base with Link
Busbar
A Set of 250A Alluminium Busbar for TPN System Suitable & Complete with Heat Shrinkable Sleeves, Epoxy Supports & Hardware [Density:- 0.64A/mm²] Outgoing
32.8KW S/D Starter Feeder consisting of following
100A TP MCCB [10KA], 80A TP Contactor, 0-60A Electronic MPR, Auxiliary Contactor, S/D Timer, Local/Remote Selector Switch, Push Button [Start,Stop], Indication Lamp [On,Off Trip], Control Fuse base with Link, 10HP S/D Starter Feeder consisting of following
40A TP MCB [10KA], 32A TP Contactor, 0-20A Electronic MPR, Auxiliary Contactor, S/D Timer, Local/Remote Selector Switch, Push Button [Start,Stop], Indication Lamp [On,Off Trip]
Control Fuse base with Link
10HP S/D Starter Feeder consisting of following
63A TP MCB [10KA], 38A TP Contactor,0-20A Electronic MPR, Auxiliary Contactor, S/D Timer, Local/Remote Selector Switch, Push Button [Start,Stop], Indication Lamp [On,Off Trip]
Control Fuse base with Link,63A MCB Feeder consisting of following
63A TP MCB [10KA]
Indication Lamp [On], Control Fuse base with Link
32A MCB Feeder consisting of following
32A TP MCB [10KA], Indication Lamp [On], Control Fuse base with Link
1
-
492546
BUNGALOW COOLING TOWER PANEL( L= 4500mm , D=600mm, H=2175mm)
Incomer 1 & 2 2
250A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock],Auxi Contactor [2NO+2NC].Digital Multifunction Meter wirh RS485 Comm. Port,250/5A, Class-1.0, 15VA C.Ts. For Metering,Indication Lamp [On],415V/230V AC Control Transformer.,32A TP MCB For Trans. I/P & O/P Side,Control Fuse base with Link BUSCOUPLER 1
250A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock]
Auxi Contactor [2NO+2NC],Indication Lamp [On],Control Fuse base with Link,Busbar
A Set of 250A Alluminium Busbar for TPN System Suitable & Complete with Heat Shrinkable Sleeves, Epoxy Supports & Hardware [Density:- 0.64A/mm²] Outgoing
32.8KW S/D Starter Feeder consisting of following 4
100A TP MCCB [10KA],80A TP Contactor,0-60A Electronic MPR,Auxiliary Contactor,S/D Timer,Local/Remote Selector Switch,Push Button [Start,Stop],Indication Lamp [On,Off Trip],Control Fuse base with Link 10HP S/D Starter Feeder consisting of following 4
40A TP MCB [10KA],32A TP Contactor,0-20A Electronic MPR,Auxiliary Contactor,S/D Timer,Local/Remote Selector Switch,Push Button [Start,Stop],Indication Lamp [On,Off Trip]
Control Fuse base with Link 10HP S/D Starter Feeder consisting of following 1
63A TP MCB [10KA],38A TP Contactor,0-20A Electronic MPR,Auxiliary Contactor,S/D Timer,Local/Remote Selector Switch,Push Button [Start,Stop],Indication Lamp [On,Off Trip]
Control Fuse base with Link 63A MCB Feeder consisting of following 4
63A TP MCB [10KA],Indication Lamp [On],Control Fuse base with Link 32A MCB Feeder consisting of following 3
32A TP MCB [10KA],Indication Lamp [On],Control Fuse base with Link
1
-
704314
Typical Each Block Panel For (Acadamic Spine 8 Nos. / Dinning 1 No. / Nu School 1 No.) ( L= 3500mm , D=600mm, H=2175mm)
Incomer 1 & 2
100A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock]
Auxi Contactor [2NO+2NC],Digital Multifunction Meter wirh RS485 Comm. Port,100/5A, Class-1.0, 15VA C.Ts. For Metering,Indication Lamp [On],415V/230V AC Control Transformer.
32A TP MCB For Trans. I/P & O/P Side,Control Fuse base with Link,
BUSCOUPLER
100A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock],Auxi Contactor [2NO+2NC],Indication Lamp [On], Control Fuse base with Link
Busbar
A Set of 100A Alluminium Busbar for TPN System Suitable & Complete with Heat Shrinkable Sleeves, Epoxy Supports & Hardware [Density:- 0.64A/mm²] Outgoing
32.8KW S/D Starter Feeder consisting of following
100A TP MCCB [10KA],80A TP Contactor,0-60A Electronic MPR,Auxiliary Contactor,S/D Timer,Local/Remote Selector Switch,Push Button [Start,Stop],Indication Lamp [On,Off Trip]
Control Fuse base with Link
10HP S/D Starter Feeder consisting of following
40A TP MCB [10KA],32A TP Contactor,0-20A Electronic MPR,Auxiliary Contactor,S/D Timer,Local/Remote Selector Switch,Push Button [Start,Stop],Indication Lamp [On,Off Trip], Control Fuse base with Link
10HP S/D Starter Feeder consisting of following
63A TP MCB [10KA],38A TP Contactor,0-20A Electronic MPR,Auxiliary Contactor,S/D Timer,Local/Remote Selector Switch,Push Button [Start,Stop],Indication Lamp [On,Off Trip],Control Fuse base with Link
63A MCB Feeder consisting of following
63A TP MCB [10KA],Indication Lamp [On],Control Fuse base with Link
32A MCB Feeder consisting of following,32A TP MCB [10KA],Indication Lamp [On], Control Fuse base with Link
10
-
424810
Typical Each Block Panel For Acadamic Hostel HVAC Panel ( L= 3500mm , D=600mm, H=2175mm)
Incomer 1 & 2 2
400A FP MCCB with Microprocessor based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock]
Auxi Contactor [2NO+2NC]
Digital Multifunction Meter wirh RS485 Comm. Port
400/5A, Class-1.0, 15VA C.Ts. For Metering
Indication Lamp [On]
415V/230V AC Control Transformer.
32A TP MCB For Trans. I/P & O/P Side
Control Fuse base with Link BUSCOUPLER1
400A FP MCCB with Microprocessor based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock]
Auxi Contactor [2NO+2NC], Indication Lamp [On]
Control Fuse base with Link
Busbar
A Set of 500A Alluminium Busbar for TPN System Suitable & Complete with Heat Shrinkable Sleeves, Epoxy Supports & Hardware [Density:- 0.64A/mm²] Outgoing
250A MCCB Feeder consisting of following 2
250A FP MCCB with Microprocessor based O/L & S/C protection release [25KA], Digital Multifunction Meter wirh RS485 Comm. Port , 250/5A, Class-1, 15VA C.Ts. For Metering
Indication Lamp [On], Control Fuse base with Link 25A MCB Feeder consisting of following 21
25A TP MCB [10KA],Indication Lamp [On],Control Fuse base with Link
8
-
458695
Girls Hostel HVAC Panels ( L= 3500mm , D=600mm, H=2175mm)
Incomer 1 & 2 2
400A FP MCCB with Microprocessor based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock]
Auxi Contactor [2NO+2NC]
Digital Multifunction Meter wirh RS485 Comm. Port
400/5A, Class-1.0, 15VA C.Ts. For Metering
Indication Lamp [On]
415V/230V AC Control Transformer.
32A TP MCB For Trans. I/P & O/P Side
Control Fuse base with Link BUSCOUPLER1
400A FP MCCB with Microprocessor based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock]
Auxi Contactor [2NO+2NC]
Indication Lamp [On]
Control Fuse base with Link
Busbar
A Set of 400A Alluminium Busbar for TPN System Suitable & Complete with Heat Shrinkable Sleeves, Epoxy Supports & Hardware [Density:- 0.64A/mm²] Outgoing
250A MCCB Feeder consisting of following 2
250A FP MCCB with Microprocessor based O/L & S/C protection release [25KA] Digital Multifunction Meter wirh RS485 Comm. Port 250/5A, Class-1, 15VA C.Ts. For Metering
Indication Lamp [On]
Control Fuse base with Link 25A MCB Feeder consisting of following 21
25A TP MCB [10KA]
Indication Lamp [On]
Control Fuse base with Link
1
-
617293
TYPICAL HOSTEL COOLING TOWER PANEL-1( L= 2800mm , D=600mm, H=2175mm)
Incomer 100A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],Digital Multifunction Meter wirh RS485 Comm. Port,100/5A, Class-1.0, 15VA C.Ts. For Metering,Indication Lamp [On],415V/230V AC Control Transformer.
32A TP MCB For Trans. I/P & O/P Side,Control Fuse base with Link
Busbar
A Set of 100A Alluminium Busbar for TPN System Suitable & Complete with Heat Shrinkable Sleeves, Epoxy Supports & Hardware [Density:- 0.64A/mm²] Outgoing
11KW S/D Starter Feeder consisting of following,40A TP MCB [10KA],32A TP Contactor,0-20A Electronic MPR,Auxiliary Contactor,S/D Timer,Local/Remote Selector Switch,Push Button [Start,Stop],Indication Lamp [On,Off Trip],Control Fuse base with Link
11KW VFD with bypass S/D Starter Feeder consisting of following
40A TP MCB [10KA],32A TP Contactor,0-20A Electronic MPR,11KW Variable Freq. Drive,Auxiliary Contactor,S/D Timer,Local/Remote Selector Switch,VFD/S/D Bypass Selector Switch,Push Button [Start,Stop,Speede Decrease,Speed ,ncrease,Reset],Indication Lamp [On,Off Trip],Cooling Fan,Control Fuse base with Link,
5HP DOL Starter Feeder consisting of following
5.5-8A TP MPCB,16A TP Contactor,Auxiliary Contactor,Local/Remote Selector Switch,Push Button [Start,Stop],Indication Lamp [On,Off Trip],Control Fuse base with Link
63A MCB Feeder consisting of following
63A TP MCB [10KA],Indication Lamp [On],Control Fuse base with Link,
40A MCB Feeder consisting of following
40A TP MCB [10KA]
Indication Lamp [On]
Control Fuse base with Link
4
-
481585
TYPICAL HOSTEL COOLING TOWER PANEL -2 ( L= 2800mm , D=600mm, H=2175mm)
Incomer 1
100A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],Digital Multifunction Meter wirh RS485 Comm. Port,100/5A, Class-1.0, 15VA C.Ts. For Metering,Indication Lamp [On]415V/230V AC Control Transformer.
32A TP MCB For Trans. I/P & O/P Side,Control Fuse base with Link Busbar
A Set of 100A Alluminium Busbar for TPN System Suitable & Complete with Heat Shrinkable Sleeves, Epoxy Supports & Hardware [Density:- 0.64A/mm²] Outgoing
11KW S/D Starter Feeder consisting of following 1
40A TP MCB [10KA],32A TP Contactor,0-20A Electronic MPR,Auxiliary Contactor,S/D Timer,Local/Remote Selector Switch,Push Button [Start,Stop],Indication Lamp [On,Off Trip],Control Fuse base with Link 11KW VFD with bypass S/D Starter Feeder consisting of following 4
40A TP MCB [10KA],32A TP Contactor,0-20A Electronic MPR,11KW Variable Freq. Drive,Auxiliary Contactor,S/D Timer,Local/Remote Selector Switch,VFD/S/D Bypass Selector Switch,Push Button [Start,Stop,Speede Decrease,Speed Increase,Reset],Indication Lamp [On,Off Trip],Cooling Fan,Control Fuse base with Link 7.5HP S/D Starter Feeder consisting of following 2
40A TP MCB [10KA] 32A TP Contactor ,0-20A Electronic MPR,Auxiliary Contactor,S/D Timer,Local/Remote Selector Switch,Push Button [Start,Stop],Indication Lamp [On,Off Trip],Control Fuse base with Link 63A MCB Feeder consisting of following2
63A TP MCB [10KA],Indication Lamp [On],Control Fuse base with Link 40A MCB Feeder consisting of following 1
40A TP MCB [10KA],Indication Lamp [On],Control Fuse base with Link
2
-
558693
TYPICAL HOSTEL COOLING TOWER PANEL-3 ( L= 2800mm , D=600mm, H=2175mm)
Incomer 1
100A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],Digital Multifunction Meter wirh RS485 Comm. Port,100/5A, Class-1.0, 15VA C.Ts. For Metering,Indication Lamp [On],415V/230V AC Control Transformer.,32A TP MCB For Trans. I/P & O/P Side,Control Fuse base with Link Busbar
A Set of 100A Alluminium Busbar for TPN System Suitable & Complete with Heat Shrinkable Sleeves, Epoxy Supports & Hardware [Density:- 0.64A/mm²] Outgoing 11KW S/D with VFD Starter Feeder consisting of following 4
40A TP MCB [10KA],32A TP Contactor,0-20A Electronic MPR,11KW Variable Freq. Drive,Auxiliary Contactor,S/D Timer,Local/Remote Selector Switch,VFD/S/D Bypass Selector Switch,Push Button [Start,Stop,Speede Decrease,Speed Increase,Reset],Indication Lamp [On,Off Trip],Cooling Fan,Control Fuse base with Link 10HP S/D Starter Feeder consisting of following 3
40A TP MCB [10KA],32A TP Contactor,0-20A Electronic MPR,Auxiliary Contactor,S/D Timer
Local/Remote Selector Switch,Push Button [Start,Stop],Indication Lamp [On,Off Trip],Control Fuse base with Link 63A MCB Feeder consisting of following 2
63A TP MCB [10KA],Indication Lamp [On],Control Fuse base with Link 40A MCB Feeder consisting of following 1
40A TP MCB [10KA],Indication Lamp [On],Control Fuse base with Link
2
-
558693
GIRLS HOSTEL COOLING TOWER PANEL ( L= 3500mm , D=600mm, H=2175mm)
Incomer 1
250A FP MCCB with Microprocessor based O/L & S/C protection release [25KA]
Digital Multifunction Meter wirh RS485 Comm. Port
250/5A, Class-1.0, 15VA C.Ts. For Metering
Indication Lamp [On]
415V/230V AC Control Transformer.
32A TP MCB For Trans. I/P & O/P Side
Control Fuse base with Link
Busbar
A Set of 250A Alluminium Busbar for TPN System Suitable & Complete with Heat Shrinkable Sleeves, Epoxy Supports & Hardware [Density:- 0.64A/mm²] Outgoing
17.5KW S/D Bypass VFD Starter Feeder consisting of following 4
63A TP MCB [10KA], 45A TP Contactor,0-20A Electronic MPR,17.5 KW Variable Freq. Drive,Auxiliary Contactor,S/D Timer,Local/Remote Selector Switch,VFD/S/D Bypass Selector Switch,Push Button [Start,Stop,Speede Decrease,Speed Increase,Reset],Indication Lamp [On,Off Trip],Cooling Fan,Control Fuse base with Link
10HP S/D Starter Feeder consisting of following 3
40A TP MCB [10KA],32A TP Contactor,0-20A Electronic MPR,Auxiliary Contactor,S/D Timer,Local/Remote Selector Switch,Push Button [Start,Stop],Indication Lamp [On,Off Trip],Control Fuse base with Link
100A MCCB Feeder consisting of following 1
100A FP MCCB with thermal Magnetic based O/L, S/C protection release [25KA] ,Indication Lamp [On],Control Fuse base with Link
63A MCB Feeder consisting of following 2
63A TP MCB [10KA],Indication Lamp [On],Control Fuse base with Link
40A MCB Feeder consisting of following 1
40A TP MCB [10KA],Indication Lamp [On],Control Fuse base with Link
1
-
609018
STARTER PANEL FOR TERTIARY PUMP TYPICAL PANEL -1( L= 1760mm , D=600mm, H=2175mm)
Incomer 1
63A TPN MCB [10KA]
Digital Multifunction Meter wirh RS485 Comm. Port
60/5A, Class-1.0, 15VA C.Ts. For Metering
Indication Lamp [On]
Control Fuse base with Link Outgoing
3.5KW VFD Bypass DOL Starter Feeder consisting of following 3
32A TP MCB [10KA] 5.5-8A TP MPCB
16A TP Contactor
3.5 KW Variable Freq. Drive
Auxiliary Contactor
Local/Remote Selector Switch
VFD/DOL Bypass Selector Switch
Push Button [Start,Stop,Speede Decrease,Speed Increase,Reset]
Indication Lamp [On,Off Trip]
Cooling Fan
Control Fuse base with Link
40A MCB Feeder consisting of following 1
40A TP MCB [10KA]
Indication Lamp [On]
Control Fuse base with Link
6
-
266718
STARTER PANEL FOR TERTIARY PUMP TYPICAL PANEL -2( L= 1760mm , D=600mm, H=2175mm)
Incomer 1
63A TPN MCB [10KA]
Digital Multifunction Meter wirh RS485 Comm. Port
60/5A, Class-1.0, 15VA C.Ts. For Metering
Indication Lamp [On]
Control Fuse base with Link
Outgoing
1.5 KW DOL Bypass VFD Starter Feeder consisting of following 3
32A TP MCB [10KA]
2.8-4A TP MPCB
16A TP Contactor
1.5 KW Variable Freq. Drive
Auxiliary Contactor
Local/Remote Selector Switch
VFD/DOL Bypass Selector Switch
Push Button [Start,Stop,Speede Decrease,Speed Increase,Reset]
Indication Lamp [On,Off Trip]
Cooling Fan
Control Fuse base with Link
40A MCB Feeder consisting of following 1
40A TP MCB [10KA]
Indication Lamp [On]
Control Fuse base with Link
3
-
225815
STARTER PANEL FOR TERTIARY PUMP TYPICAL PANEL -3( L= 1760mm , D=600mm, H=2175mm)
Incomer 1
63A TPN MCB [10KA]
Digital Multifunction Meter wirh RS485 Comm. Port
60/5A, Class-1.0, 15VA C.Ts. For Metering
Indication Lamp [On]
Control Fuse base with Link
Outgoing
7.5KW S/D Bypass VFD Starter Feeder consisting of following 3
40A TP MCB [10KA]
32A TP Contactor
0-20A Electronic MPR
7.5 KW Variable Freq. Drive
Auxiliary Contactor
S/D Timer
Local/Remote Selector Switch
VFD/S/D Bypass Selector Switch
Push Button [Start,Stop,Speede Decrease,Speed Increase,Reset]
Indication Lamp [On,Off Trip]
Cooling Fan
Control Fuse base with Link
40A MCB Feeder consisting of following 1
40A TP MCB [10KA] Indication Lamp [On]
Control Fuse base with Link
2
-
302303
NU School GF (CRECHE)( L= 2000mm , D=600mm, H=2175mm)
Incomer 1 & 2 2
80A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock]
Auxi Contactor [2NO+2NC],Digital Multifunction Meter wirh RS485 Comm. Port,80/5A, Class-1.0, 15VA C.Ts. For Metering,Indication Lamp [On]
415V/230V AC Control Transformer.,32A TP MCB For Trans. I/P & O/P Side, Control Fuse base with Link BUSCOUPLER 1
80A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock]
Auxi Contactor [2NO+2NC],Indication Lamp [On],Control Fuse base with Link,Outgoing,
63A MCCB Feeder consisting of following 1
63A TP MCCB with thermal Magnetic based O/L, S/C protection release [25KA] Indication Lamp [On],Control Fuse base with Link 63A MCB Feeder consisting of following 1
63A SP MCB [10KA],Indication Lamp [On],Control Fuse base with Link 40A MCB Feeder consisting of following 1
40A SP MCB [10KA],Indication Lamp [On],Control Fuse base with Link 32A MCB Feeder consisting of following 1
32A DP MCB [10KA],Indication Lamp [On],Control Fuse base with Link 32A MCB Feeder consisting of following 1
32A SP MCB [10KA],Indication Lamp [On],Control Fuse base with Link 10A MCB Feeder consisting of following 25
10A SP MCB [10KA] ,Indication Lamp [On],Control Fuse base with Link
1
-
260335
NU School GF Primary School ( L= 2800mm , D=600mm, H=2175mm)
Incomer 1 & 2 2
80A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock]
Auxi Contactor [2NO+2NC]
Digital Multifunction Meter wirh RS485 Comm. Port
80/5A, Class-1.0, 15VA C.Ts. For Metering
Indication Lamp [On]
415V/230V AC Control Transformer.
32A TP MCB For Trans. I/P & O/P Side
Control Fuse base with Link BUSCOUPLER 1
80A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock]
Auxi Contactor [2NO+2NC],Indication Lamp [On],Control Fuse base with Link,Outgoing
63A MCCB Feeder consisting of following 1
63A TP MCCB with thermal Magnetic based O/L, S/C protection release [25KA] ,Indication Lamp [On],Control Fuse base with Link
63A MCB Feeder consisting of following1
63A FP MCB [10KA],Indication Lamp [On],Control Fuse base with Link 40A MCB Feeder consisting of following2
40A FP MCB [10KA] ,Indication Lamp [On] ,Control Fuse base with Link 32A MCB Feeder consisting of following1
32A FP MCB [10KA] ,Indication Lamp [On] ,Control Fuse base with Link 10A MCB Feeder consisting of following22
10A SP MCB [10KA] ,Indication Lamp [On],Control Fuse base with Link
1
-
275605
NU School GF Secondary School ( L= 2800mm , D=600mm, H=2175mm)
Incomer 1 & 2 2
80A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock]
Auxi Contactor [2NO+2NC] Digital Multifunction Meter wirh RS485 Comm. Port
80/5A, Class-1.0, 15VA C.Ts. For Metering
Indication Lamp [On]
415V/230V AC Control Transformer.
32A TP MCB For Trans. I/P & O/P Side
Control Fuse base with Link BUSCOUPLER 1
80A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock]
Auxi Contactor [2NO+2NC],Indication Lamp [On],Control Fuse base with Link
Outgoing
63A MCCB Feeder consisting of following 1,63A TP MCCB with thermal Magnetic based O/L, S/C protection release [25KA] ,Indication Lamp [On],Control Fuse base with Link
63A MCB Feeder consisting of following1
63A FP MCB [10KA] ,Indication Lamp [On] ,Control Fuse base with Link,
40A MCB Feeder consisting of following1
40A FP MCB [10KA] ,Indication Lamp [On] ,Control Fuse base with Link 32A MCB Feeder consisting of following1
32A FP MCB [10KA] ,Indication Lamp [On] ,Control Fuse base with Link 32A MCB Feeder consisting of following1
32A DP MCB [10KA] ,,Indication Lamp [On] ,Control Fuse base with Link 10A MCB Feeder consisting of following7
10A SP MCB [10KA] ,Indication Lamp [On] ,Control Fuse base with Link
1
-
223056
Medical Centre Ground Floor ( L= 2800mm , D=600mm, H=2175mm)
Incomer 1 & 2 2
63A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock],Auxi Contactor [2NO+2NC],Digital Multifunction Meter wirh RS485 Comm. Port,80/5A, Class-1.0, 15VA C.Ts. For Metering,Indication Lamp [On],415V/230V AC Control Transformer.,32A TP MCB For Trans. I/P & O/P Side,Control Fuse base with Link BUSCOUPLER1
63A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock]
Auxi Contactor [2NO+2NC],Indication Lamp [On],Control Fuse base with Link Outgoing
40A MCB Feeder consisting of following1
40A DP MCB [10KA],Indication Lamp [On] ,Control Fuse base with Link 32A MCB Feeder consisting of following2
32A TP MCB [10KA] ,Indication Lamp [On] ,Control Fuse base with Link 25A MCB Feeder consisting of following6
25A TP MCB [10KA] ,Indication Lamp [On] ,Control Fuse base with Link 25A MCB Feeder consisting of following2
25A SP MCB [10KA] ,Indication Lamp [On] ,Control Fuse base with Link 20A MCB Feeder consisting of following1
20A SP MCB [10KA] ,Indication Lamp [On] ,Control Fuse base with Link 10A MCB Feeder consisting of following5
10A SP MCB [10KA] ,Indication Lamp [On] ,Control Fuse base with Link
1
-
217035
Sport Centre Ground Floor ( L= 2800mm , D=600mm, H=2175mm)
Incomer 1 & 2 2
100A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock]
Auxi Contactor [2NO+2NC],Digital Multifunction Meter wirh RS485 Comm. Port,80/5A, Class-1.0, 15VA C.Ts. For Metering,415V/230V AC Control Transformer.,32A TP MCB For Trans. I/P & O/P Side,Indication Lamp [On],Control Fuse base with Link
BUSCOUPLER 1
100A FP MCCB with Thermal Magnetic based O/L & S/C protection release [25KA],U/V Release [Elect+Mech. Lock]
Auxi Contactor [2NO+2NC],Indication Lamp [On],Control Fuse base with Link
Busbar
A Set of 100A Alluminium Busbar for TPN System Suitable & Complete with Heat Shrinkable Sleeves, Epoxy Supports & Hardware [Density:- 0.64A/mm²] Outgoing
63A MCCB Feeder consisting of following 1,63A TP MCCB with thermal Magnetic based O/L, S/C protection release [25KA] ,Indication Lamp [On],Control Fuse base with Link
40A MCB Feeder consisting of following1
40A FP MCB [10KA],Indication Lamp [On] ,Control Fuse base with Link 40A MCB Feeder consisting of following1
40A TP MCB [10KA],Indication Lamp [On],Control Fuse base with Link
32A MCB Feeder consisting of following2
32A TP MCB [10KA],Indication Lamp [On] ,Control Fuse base with Link 25A MCB Feeder consisting of following2
25A TP MCB [10KA] ,Indication Lamp [On] ,Control Fuse base with Link
20A MCB Feeder consisting of following8
20A TP MCB [10KA],Indication Lamp [On] ,Control Fuse base with Link
16A MCB Feeder consisting of following2
16A DP MCB [10KA] ,Indication Lamp [On] ,Control Fuse base with Link
1
-
280855
HVAC PANEL-2 DINNING AREA ( L= 6500mm , D=1000mm, H=2375mm)
Incomer - 1 & 2 2
400A FP MCCB with microprocessor based O/L, S/C & E/F protection release [35KA] [Elec+Mech Locking] Auxi.Contactor [2NO+2NC],Digital Multifunction Meter wirh RS485 Comm. Port,0-400A Analog Ammeter, Cl-1 [Size:- 96x96mm],Ammeter Selector Switch,400/5A, Class-1.0, 15VA C.Ts. For Metering,0-500V Analog Voltmeter, Cl-1 [Size:- 96x96mm],Voltmeter Selector Switch,Indication Lamp [R,Y,B,On],415V/230V AC Control Transformer.,32A TP MCB For Trans. I/P & O/P Side,2A SP MCB [10KA] Incomer – 3 1
250A FP MCCB with microprocessor based O/L, S/C & E/F protection release [35KA] [Elec+Mech Locking] ,Auxi.Contactor [2NO+2NC],Digital Multifunction Meter wirh RS485 Comm. Port,0-250A Analog Ammeter, Cl-1 [Size:- 96x96mm],Ammeter Selector Switch,250/5A, Class-1.0, 15VA C.Ts. For Metering,0-500V Analog Voltmeter, Cl-1 [Size:- 96x96mm],Voltmeter Selector Switch,Indication Lamp [R,Y,B,On],415V/230V AC Control Transformer.,32A TP MCB For Trans. I/P & O/P Side,2A SP MCB [10KA] BUSCOUPLER 1
400A FP MCCB with microprocessor based O/L, S/C & E/F protection release [35KA] [Elec+Mech Locking],Auxi.Contactor [2NO+2NC],Indication Lamp [On] ,2A SP MCB [10KA] Busbar
A Set of 400A Alluminium Busbar for TPN System Suitable & Complete with Heat Shrinkable Sleeves, Epoxy Supports & Hardware [Density:- 0.64A/mm²] Outgoing
400A MCCB Feeder consisting of following 1
400A FP MCCB with microprocessor based O/L, S/C protection release [35KA] + ROM + Spreader Link ,Digital Multifunction Meter wirh RS485 Comm. Port ,400/5A, Class-1, 15VA C.Ts. For Metering,Indication Lamp [On],Control Fuse base with Link 160A MCCB Feeder consisting of following 6
160A FP MCCB with microprocessor based O/L, S/C protection release [35KA] + ROM + Spreader Link ,Digital Multifunction Meter wirh RS485 Comm. Port ,160/5A, Class-1, 15VA C.Ts. For Metering,Indication Lamp [On],Control Fuse base with Link 63A MCCB Feeder consisting of following 2
63A FP MCCB with microprocessor based O/L, S/C protection release [35KA] + ROM ,Digital Multifunction Meter wirh RS485 Comm. Port ,60/5A, Class-1, 15VA C.Ts. For Metering
Indication Lamp [On],Control Fuse base with Link 4.5KW VFD with Bypass S/D Starter Feeder consisting of following 5
63A TP MCCB with motor back up protection,32A TP Contactor,0-20A Electronic MPR,4.5KW VFD ,Auxiliary Contactor,Digital Multifunction Meter wirh RS485 Comm. Port ,60/5A, Class- 1, 15VA C.Ts. For Metering,S/D Timer,Local/Remote Selector Switch,VFD/S/D Bypass Selector Switch,Push Button [Start,Stop,Speede Decrease,Speed Increase,Reset],Indication Lamp [On,Off Trip],Cooling Fan,Control Fuse base with Link 5.5KW S/D Starter Feeder consisting of following 5
63A TP MCCB with motor back up protection,32A TP Contactor,9A TP Contactor,0-20A Electronic MPR,Auxiliary Contactor,Digital Multifunction Meter wirh RS485 Comm. Port ,60/5A, Class-1, 15VA C.Ts. For Metering,S/D Timer,Local/Remote Selector Switch,,Push Button [Start,Stop],Indication Lamp [On,Off Trip],Control Fuse base with Link
1
-
2371441
HVAC PANEL-3 NU SCHOOL ( L= 6500mm , D=1000mm, H=2375mm)
Incomer - 1 & 2 2
400A FP MCCB with microprocessor based O/L, S/C & E/F protection release [35KA] [Elec+Mech Locking] Auxi.Contactor [2NO+2NC], Digital Multifunction Meter wirh RS485 Comm. Port,0-400A Analog Ammeter, Cl-1 [Size:- 96x96mm],Ammeter Selector Switch,400/5A, Class-1.0, 15VA ,C.Ts. For Metering,0-500V Analog Voltmeter, Cl-1 [Size:- 96x96mm],Voltmeter Selector Switch,Indication Lamp [R,Y,B,On],415V/230V AC Control Transformer.,32A TP MCB For Trans. I/P & O/P Side,2A SP MCB [10KA] Incomer – 3 1
250A FP MCCB with microprocessor based O/L, S/C & E/F protection release [35KA] [Elec+Mech Locking] Auxi.Contactor [2NO+2NC],Digital Multifunction Meter wirh RS485 Comm. Port,0-250A Analog Ammeter, Cl-1 [Size:- 96x96mm],Ammeter Selector Switch,250/5A, Class-1.0, 15VA C.Ts. For Metering,0-500V Analog Voltmeter, Cl-1 [Size:- 96x96mm],Voltmeter Selector Switch,Indication Lamp [R,Y,B,On],415V/230V AC Control Transformer.,32A TP MCB For Trans. I/P & O/P Side,2A SP MCB [10KA] BUSCOUPLER 1
400A FP MCCB with microprocessor based O/L, S/C & E/F protection release [35KA] [Elec+Mech Locking],Auxi.Contactor [2NO+2NC],Indication Lamp [On] ,2A SP MCB [10KA] Busbar
A Set of 400A Alluminium Busbar for TPN System Suitable & Complete with Heat Shrinkable Sleeves, Epoxy Supports & Hardware [Density:- 0.64A/mm²] Outgoing
400A MCCB Feeder consisting of following 1
400A FP MCCB with microprocessor based O/L, S/C protection release [35KA] + ROM + Spreader Link,Digital Multifunction Meter wirh RS485 Comm. Port ,400/5A, Class-1, 15VA C.Ts. For Metering,Indication Lamp [On],Control Fuse base with Link 160A MCCB Feeder consisting of following 6
160A FP MCCB with microprocessor based O/L, S/C protection release [35KA] + ROM + Spreader Link ,Digital Multifunction Meter wirh RS485 Comm. Port ,160/5A, Class-1, 15VA C.Ts. For Metering,Indication Lamp [On],Control Fuse base with Link 63A MCCB Feeder consisting of following 2
63A FP MCCB with microprocessor based O/L, S/C protection release,[35KA] + ROM ,Digital Multifunction Meter wirh RS485 Comm. Port ,60/5A, Class-1, 15VA C.Ts. For Metering
Indication Lamp [On],Control Fuse base with Link 4.5KW VFD with Bypass S/D Starter Feeder consisting of following 5
63A TP MCCB with motor back up protection,32A TP Contactor,0-20A Electronic MPR,4.5KW VFD ,Auxiliary Contactor,Digital Multifunction Meter wirh RS485 Comm. Port ,
60/5A, Class-1, 15VA C.Ts. For Metering,S/D Timer,Local/Remote Selector Switch,VFD/S/D Bypass Selector Switch,Push Button [Start,Stop,Speede Decrease,Speed Increase,Reset]
Indication Lamp [On,Off Trip],Cooling Fan,Control Fuse base with Link 5.5KW S/D Starter Feeder consisting of following 5
63A TP MCCB with motor back up protection,32A TP Contactor,9A TP Contactor,0-20A Electronic MPR,Auxiliary Contactor,Digital Multifunction Meter wirh RS485 Comm. Port ,60/5A, Class-1, 15VA C.Ts. For Metering,S/D Timer,Local/Remote Selector Switch,Push Button [Start,Stop],Indication Lamp [On,Off Trip],Control Fuse base with Link
1
-
2371441
SECTION 2 -SUPPLY & INSTALLATION OF HOT DIP GALVANIZED CABLE TRAY (80-100 MICRON)
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors,suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.
600 mm width X 50 mm depth X 2.0 mm thickness
300
-
1646
450 mm width X 50 mm depth X 2.0 mm thickness
300
-
1213
150 mm width X 50 mm depth X 1.6 mm thickness
1960
-
644
225 mm width X 50 mm depth X 1.6 mm thickness
940
-
811
100 mm width X 50 mm depth X 1.6 mm thickness
800
-
599
Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.
600 mm width X 50 mm depth X 2.0 mm thickness
20
-
3509
450 mm width X 50 mm depth X 2.0 mm thickness
20
-
2490
150 mm width X 50 mm depth X 1.6 mm thickness
100
-
1168
225 mm width X 50 mm depth X 1.6 mm thickness
6
-
1565
100 mm width X 50 mm depth X 1.6 mm thickness
16
-
1063
Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.
600 mm width X 50 mm depth X 2.0 mm thickness
20
-
4138
450 mm width X 50 mm depth X 2.0 mm thickness
20
-
2920
150 mm width X 50 mm depth X 1.6 mm thickness
120
-
1274
225 mm width X 50 mm depth X 1.6 mm thickness
12
-
1820
100 mm width X 50 mm depth X 1.6 mm thickness
28
-
1220
SECTION - 3.00 SUPPLY OF XLPE ARM CU /AL CABLES (1.1KV E, & L.T. CABLE)
Supply of following size of 1.1KV grade multicore Aluminium / copper conductor XLPE insulated & PVC sheathed armoured power cable as per IS: 7098 (Part-1) 1988 complete as required.
Procurement of cables shall be on the basis of actual site measurements and the quantities shown in the schedule of work shall be regarded as a guide only.
1.1 KV L.T.CABLE FRLS ( XLPE)
3.5C X 300SQ.MM AL XLPE AR CABLE
2400
-
1326.32
3.5C X 240SQ.MM AL XLPE AR CABLE
9050
-
1082.21
3.5C X 185 SQ.MM AL XLPE AR CABLE
2635
-
859.8
3.5C X 120 SQ.MM AL XLPE AR CABLE
400
-
582.24
3.5C X 50 SQ.MM AL XLPE AR CABLE
7970
-
283.89
4C X 25SQ.MM AL XLPE AR CABLE
2000
-
183.53
4C X 16SQ.MM AL XLPE AR CABLE
860
-
145.56
4C X 10SQ.MM AL XLPE AR CABLE
250
-
127.48
4C X 6SQ.MM CU XLPE AR CABLE
15935
-
283.89
4C X 4SQ.MM CU XLPE AR CABLE
1900
-
203.42
4C X 2.5 SQ.MM CU XLPE AR CABLE
1340
-
149.18
3C X 1.5 SQ.MM CU XLPE AR CABLE
5875
-
89.51
FOR CHILLER
1C X 300 SQ.MM CU FLEXIABLE CABLE
480
-
2946.47
1C X 240 SQ.MM CU FLEXIABLE CABLE
1000
-
2365.13
1C X 185 SQ.MM CU FLEXIBLE CABLE
1
-
1835.33
1C X 120 SQ.MM CU FLEXIBLE CABLE
1
-
1193.41
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required
Upto 35 sq. Mm
5000
-
323
Above 95 sq. mm and upto 185 sq. mm
1
-
352
Above 185 sq. mm and upto 400 sq. mm
1
-
396
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing masonry open duct as required.
Upto 35 sq. Mm
150
-
23
Above 35 sq. mm and upto 95 sq. mm
50
-
38
Above 95 sq. mm and upto 185 sq. mm
150
-
52
Above 185 sq. mm and upto 400 sq. mm
150
-
96
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on cable tray as required.
Upto 35 sq. mm (clamped with 1mm thick saddle)
26750
-
33
Above 35 sq. mm and upto 95 sq. mm
280
-
74
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/ 40x3mm MS flat clamp)
985
-
93
Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm
MS flat clamp)
480
-
150
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
50
-
530
Supplying and fixing cable route marker with 10 cm X 10 cm X 5mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
50
-
383
SECTION - 4.00 CABLE TERMINATION
Supply & Fixing Double compression Glands Brass glands & making joint with necessary AL. / CU. crimping type socket (As per Cable MOC) of long neck type connecting the same to various equipment like section pillar, switch, starter, motor etc. for the following sizes Crimping shall be done with use of Hydraulic Crimping tool only:
1.1 KV L.T.CABLE ( XLPE )
3.5C X 300SQ.MM AL XLPE AR CABLE
48
-
936
3.5C X 240SQ.MM AL XLPE AR CABLE
36
-
809
3.5C X 185 SQ.MM AL XLPE AR CABLE
26
-
702
3.5C X 120 SQ.MM AL XLPE AR CABLE
12
-
489
3.5C X 50 SQ.MM AL XLPE AR CABLE
122
-
329
4C X 25SQ.MM AL XLPE AR CABLE
26
-
250
4C X 16SQ.MM AL XLPE AR CABLE
42
-
250
4C X 10SQ.MM AL XLPE AR CABLE
16
-
219
4C X 6SQ.MM CU XLPE AR CABLE
688
-
171
4C X 4SQ.MM CU XLPE AR CABLE
100
-
160
4C X 2.5 SQ.MM CU XLPE AR CABLE
68
-
150
3C X 1.5 SQ.MM CU XLPE AR CABLE
326
-
110
FOR CHILLER
1C X 300 SQ.MM CU FLEXIABLE CABLE
16
-
250
1C X 240 SQ.MM CU FLEXIABLE CABLE
40
-
220
MCCB, MCB & DB’S
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
63 A, 16 kA,TPMCCB
2
-
3000
100 A, 16 kA,TPMCCB
1
-
3726
125 A, 16 kA,TPMCCB
1
-
4145
200 A, 25 kA,TPMCCB
1
-
7628
250 A, 25 kA,TPMCCB
1
-
12917
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
6 way, Double door
1
-
1661
8 way, Double door
1
-
1760
12 way, Double door
1
-
2053
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)
6 way (4 + 18), Double door
1
-
3693
8 way (4 + 24), Double door
1
-
4601
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (MCB INCOMER) 4 way (4 + 12), Double door
1
-
5651
8 way (4 + 24), Double door
2
-
7744
12 way (4 + 36), Double door
1
-
9828
Supplying and fixing 5A to 32A Rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
40
-
199
Single Pole & Neutral
1
-
544
Double pole
2
-
556
Triple pole
14
-
826
Triple pole and neutral
1
-
1092
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
1
-
8
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
40 A
1
-
339
63 A
1
-
385
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
40 A
1
-
832
63 A
1
-
839
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
25 A
3
-
1927
40 A
1
-
2095
Bore- 300mm , bottom 4" filling with compound paste- vertically placed electrode in center of pit(no use of hammer), make paste of compound of black soil (if available)- fill up in bore/pit, ensure no air gap in compound- use water to remove air gap. Also follow manufacture installation details to get resistance (less than 5 ohm) Supply & making of maintenance free Earthing station with the use of 21/19 mm dia copper Rod, 3M long- ,with 50kg- grounding material(back fill compound with moisture capture capacity and reuse soil) resistivity - scope includes supply of electrod/ back fill compund / labour charges fo bore of 300- 3.5 mtrs depth/making earth chember with 450 mm x 450 mm x CI / FRP cover Installation detail - making 3.5 m depth bore - 100 mm fill with chemical compund paste / put electrode in centre of bore / fill up balance space of bore with chemical compund / balck cotton soil ( if avilable ) paste - carrefull for no air gap in paste , ALSO CHECK WITH ELECTRODE / COMPUND MANUFACTURE FOR INSTALLATION DETAIL TO ACHIVE LESS THEN 5 OHM
18
-
4633
Supply & making of maintenance free Earthing station with the use of 50mm dia Hot Dip Glavnized pipe in pipe or strip ,3M long- ,with 50 kg- grounding material(back fill compound with moisture capture capacity and reuse soil) resistivity - scope includes supply of electrod/ back fill compund / labour charges fo bore of 300-450- 3.5 mtrs depth/making earth chember with 450 mm x 450 mm x CI / FRP cover Installation detail - making 3.5 m depth bore - 100 mm fill with chemical compund paste / put electrode in centre of bore / fill up balance space of bore with chemical compund / balck cotton soil ( if avilable ) paste - carrefull for no air gap in paste , ALSO CHECK WITH ELECTRODE / COMPUND MANUFACTURE FOR INSTALLATION DETAIL TO ACHIVE LESS THEN 1 OHM
88
-
9657
SUPPLY & FIXING OF EARTHING GRID BY COPPER (99.9 % PURE) / HOT DEEP GALVANIZED (80-100 Micron) STRIP
The job includes supply of necessary materials such as a copper/G.I. strips, spacers, brass bolts and nuts, washers and other hardware as required. At the joint of two strips a section of 100 mm suitable thickness copper /G.I. strip to be fixed, with brass nuts bolts. i) The job also include fixing & laying of class `B' G.I. pipe when strip is entering in the building structures etc. ii) Job Done as per drawing shown in execution drawing
iii) Earth strip to be fix Nr. Earth Bus with 2 nos of Nut & bolt washer & spring washer iv) all other place strip to be weld - 100 % over laping of strip base on size of earth strip & welding all side of strip & apply black bitmnus paint & cotton tap on welding part v) in cable tray near colum earth bus 150 mm long same of earth strip size to be weld with 3 nos of 10 mm hole for future earth connection (as per given in execution drawing) vi) for copper strip brezzing to be done for connection of extantion of earth strip 25 x 5 mm CU. Strip
540
-
1009
25 x 5 mm GI. Strip
2760
-
131
20 x 3 mm GI. Strip
1
-
163
SITC of 6 gauge bare GI. Wire
1000
-
57
SITC OF PUSH BUTTONS STATION
ON Push button/Off push button with emergency Key Lock and IP67 Encloser
153
-
550
Supply and erecting fabricated support works / stands etc complete fabricated as per details given from MS flat / angle / plates etc complete with 2 coats of red oxide and 2 coats of paint on the same along with mounting of supports with use of necessary hardwares complete.
2
-
80000
MISCELLANOUS CIVIL WORK
Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres.
675
-
333
Common burnt clay F.P.S. (non modular) bricks class
designation 7.5
34500
-
4
Fine sand
900
-
806
Supply, installation , testing & commissioning of Workstation with minimum: i5 4 core, 3.2GHz, 1 TB HDD, 4GB RAM, 52X CD Writer Drive, along with keyboard, mouse, 21" LED monitor) etc, with Original Windows lifetime license and anti virus software , 1 No. Laserjet Printer (A4 Size, Colour) complete as per the detail technical specification and as per the instruction of site Engineer.
1
-
183430.09
Supply, installation , testing & commissioning of 9 Inch Five Points Multi Touch Capacitive Screen (800x480 pixel,16:9),RAM: DDR3 512MB Nand Flash: 4GB ,Google Android 4.0.3 / Linux , Support Flash 11.1 based Portable Hand Held terminal along with mounting accessories to mount on DDC Panel if required.
1
-
111316.41
Supply, installation, testing & commissioning of the following Web Based graphical Software. Providing facilities to create static & animate the graphics, navigation between the pages, display of logs, changing the time zones, popup alarms with unlimited user license & 10,000 point capacity, configurable password protection for the system and should be able to communicate with Lonworks/BACnet/MSTP devices simultaneously. This software will act as web server & no additional license should require at client side. Supply, installation , testing & commissioning of Application Software for Building Automation System to run on Windows10 Professional
1
-
641610.87
Supervisory Controllers & Integrators
Design, Supply, Installation, Testing, and Commissioning of Chiller Plant Manager suitable to control of VAM Chiller & Screw type Water-cooled chillers & balance of plant as per HVAC BOQ. Shall be a 32 Bit microprocessor based, programmable controller, factory preprogrammed system housed in a IP54 rated panel enclosure of suitable size (and qty). Shall have integrated color graphics display for display of plant graphics, facility to change settings etc. - Chiller Plant Manager shall be capable as per the technical specifications provided for CPM. The chiller plant manager should be able to control all IOs as marked in IO Summary with all related control cabling and sensors required should be taken. Further the CPM shoould be able to control all Hot Water System and other pumps etc through Bacnet IP / Bacnet Mstp. Sensors required to monitor the equipment parameters such as temperature, pressure drop run status etc. can be connetced using IO boards. The CPM should be able to generate the required graphics on a 19" display and if any additional routers etc have to be considered to suffize the memory requirements, the same should be considered along as mentioned in the specs. The CPM should be compatible with proposed BMS System and should be able to communicate and transfer data to BMS Controller / Software over open protocols (Lon/Bacnet/MSTP) to manage the entire system from one platform.
3
-
1150000
Supply, installation, testing & commissioning of Web Based Network Area Controller for Building Management System (BMS). Network Area Controller Shall support Communication with BMS Controllers (DDC controllers on Lonworks/BACnet/MSTP) & Other Application Controllers on BACnet, shall support intergation & Communication with Chiller Plant Manager, VSPS, AHU VFD's, PAC's, VAV's, DG's, UPS, Hydropneumatic PLC, Multifunction Energy Meters, KWH Energy Meters, Lifts, Fire Alarm Panels, Fire fighting pumps of main pump room, UPS etc on BACnet / MODBUS / LONWORKS. NAC should have dedicated one Lon, RS-485 & RS-232 Port with minimum of 128 MB Flash RAM with Inbuilt WEB Server. (Complete as detailed out in I/O Summary)
1
-
725976.61
Direct Digital Controllers
Supply, installation, testing & commissioning of Stand alone True Lonworks/BACnet MSTP/IP based net workable building automation controller with 32 bit processor, intelligent, UL Listed, BTL tested, ANSI / ASHRAE approved Interoperable DDC as per the specifications. All the Controllers shall be BTL tested & CE certified. Each controllers shall be equipped with Universal Inputs with a maximum polling speed of 100 ms. The controller shall be housed in a vandal proof, lockable and secure MS cabinets to be supplied along with controllers. The controller shall have 10% Extra IO capacity. Each of the following systems shall have seperate multiple controllers, as required. The DDC selection shall be based on I-O Summary as given in the tender.
For DEVAP
27
-
90747.08
For AHUs
49
-
48398.44
For Electrcial Panel
22
-
57473.15
For VRV, Cooling Tower & Pumps
59
-
29644.04
Supply, installation, testing & commissioning of following Field instruments as Per I-O Summary
Ambient air temperature and humidity sensor
5
-
17181.45
Current relay for Ventilation Fans
75
-
3024.9
Differential pressure switch for AHU blower status (0-400 pa)
130
-
3320.69
Differential pressure switch AHU filter status (0-200 pascals)
130
-
3536.06
Wall Mounted Temperature and RH sensor
76
-
4525
Duct type Temperature sensor for air temperature monitoring
130
-
2592.29
Duct Pressure Transducer (0-500 pascals)
130
-
11978.61
CO2 Sensor
25
-
15729.49
Proximity Sensor
75
-
7259.77
Supply, Installation, Testing & Commissioning of Communication Cabling, 2Cx1.5 Sqmm flexible conductor multi-stranded shielded Insulated FRLS cable complete with erection accessories such as spacers, junction boxes etc. through wall / clamped to wall / On trays in conduits
5000
-
83
Supply, Installation, Testing & Commissioning of Signal Cabling, 2Cx1.0 Sqmm flexible conductor multi-stranded shielded Insulated FRLS cable complete with erection accessories such as spacers, junction boxes etc. through wall / clamped to wall / On trays in conduits
60450
-
79
Supply, Installation, Testing & Commissioning of Power Cabling, 3Cx1.5 Sqmm flexible conductor multi-stranded shielded Insulated FRLS cable complete with erection accessories such as spacers, junction boxes etc. through wall / clamped to wall / On trays in conduits
35250
-
119
Hot Dipped Galvanised Perforated type Cable tray consisting of continuous, rigid, welded cable management system, to allow continuous ventilation of cables and maximum dissipation of heat. Provide splices, supports, and other fittings necessary for a complete, continuously grounded system as per the Specs and sizes mentioned
50mm X 100 mm
785
-
846.97
50mm X 150 mm
471
-
1088.96
50mm X 300 mm
5000
-
1330.96
Supply, Installation, Testing & Commissioning of Heavy Duty MS Conduits. through wall / clamped to wall / On trays in conduits
20mm
28000
-
157.29
25mm
23925
-
181.49
Comprehensive Maintenanace and onsite support for 1st Defect liabality period including supplying of all consumable items, accessories related to electrical & mechanical installation, etc. & operation with onsite support as per SLA of the entire HVAC system. The minimum deployment - 1. 2 Nos. Supervisor & 1Nos. Engineer for 1 shift of 8 hrs. daily, 2. 3 No. Operators in two shift daily at 3Nos. HVAC main chiller plant & 1 Nos. VRV Pump Station, 3. 2 No. Operators in one shift daily at 3Nos. HVAC main chiller plant & 1 Nos. VRV Pump Station
12
-
515449
Maintenanace for 2nd Defect liabality period including supplying of all consumable items, accessories related to electrical & mechanical installation, etc. & operation with onsite support as per SLA of the entire HVAC system by deloying staff as following:
1. 2 Nos. Supervisor & 1Nos. Engineer for 1 shift of 8 hrs. daily
2. 3 No. Operators in two shift daily at 3Nos. HVAC main chiller plant & 1 Nos. VRV Pump Station
3. 2 No. Operators in one shift daily at 3Nos. HVAC main chiller plant & 1 Nos. VRV Pump Station
12
-
515449
Comprehensive Maintenanace & operation for 3rd year including supplying of all consumable items, accessories related to electrical & mechanical installation, etc. for entire HVAC installation (3500 TR) done under this tender package with onsite support as per SLA. The minimum deployment - 1. 2 Nos. Supervisor & 1Nos. Engineer for 1 shift of 8 hrs. daily, 2. 3 No. Operators in two shift daily at 3Nos. HVAC main chiller plant & 1 Nos. VRV Pump Station, 3. 2 No. Operators in one shift daily at 3Nos. HVAC main chiller plant & 1 Nos. VRV Pump Station
12
-
765085
Comprehensive Maintenanace & operation for 4th year including supplying of all consumable items, accessories related to electrical & mechanical installation, etc. for entire HVAC installation (3500 TR) done under this tender package with onsite support as per SLA. The minimum deployment - 1. 2 Nos. Supervisor & 1Nos. Engineer for 1 shift of 8 hrs. daily, 2. 3 No. Operators in two shift daily at 3Nos. HVAC main chiller plant & 1 Nos. VRV Pump Station, 3. 2 No. Operators in one shift daily at 3Nos. HVAC main chiller plant & 1 Nos. VRV Pump Station
12
-
803339
Comprehensive Maintenanace & operation for 5th year including supplying of all consumable items, accessories related to electrical & mechanical installation, etc. for entire HVAC installation (3500 TR) done under this tender package with onsite support as per SLA. The minimum deployment - 1. 2 Nos. Supervisor & 1Nos. Engineer for 1 shift of 8 hrs. daily, 2. 3 No. Operators in two shift daily at 3Nos. HVAC main chiller plant & 1 Nos. VRV Pump Station, 3. 2 No. Operators in one shift daily at 3Nos. HVAC main chiller plant & 1 Nos. VRV Pump Station
12
-
843506
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements