Military Engineer Services Tender

Demolition of cement concrete (un reinforced) not exceeding 15 cm thickness (above or below ground level) and removal of debris from site,complete all as specified and as directed.

M&L for 25 mm thick cement concrete (1:2:4) type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair, complete all as specified and as directed.

M&L for 10 mm thick rendering on fair faces of brick /concrete surfaces as in ceiling in cement mortar 1:3 and finished even and smooth without using extra cement , complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt ), all as specified and directed by Engineer-in Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), all as specified and directed by Engineer-in Charge.

Taking down shutters of any description not exceeding 1 square metre each complete all as specified and directed.

S&F Aluminium powder coated frame, ventilator shutters (glazed, wire gauge and grill) side hung with aluminium window frame or chowkhat 1.5 mm thick aluminium powder coated (Thickness or powder coating not less than 50 micron) of size 100 mm x 44.5 mm and ventilator shutter frames glazed and wire gauze (middle, top rail, bottom rail) and styles 2 mm thick aluminum powder coated of size 44.5 x 44.5 mm including powder coated aluminium grill 50 mm x 50 mm aparture and all fitting such as rubber gasket, aluminium glazing clips locking cabinet, 4 mm thick tinted glass pane for glazed shutters, stainless steel wire mesh for gauge shutter and hook and eye for each shutter fixed with rubber gasket and glazing clip/aluiminium beads aluminium tower bolt 75 mm 02 Nos each shutter, aluminium butt hinges 75 mm 02 Nos in each shutter aluminium handle 100 mm 01 No in each shutter including all accessories, complete all as specified and directed.

Supply and fix PVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube. Fixing in opening as per specification and all as per drawing.complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 150mm size aluminium handles, cast type, anodised,complete all as specified and directed.

S&F 150mm size and aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F mild steel cold rolled butt hinges medium weight 100 mm long, including fixing to pressed steel door frame if required,complete all as specified and directed.

S&F mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate,complete all as specified and directed.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

S&F in repair wash basins, vitreous china, white, flat back, size 550 mm X 400 mm with and including GI brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes,pvc waste pipes, waste fittings etc. with silicone sealant,complete all as specified and as directed.

S&F in repairs vitreous China Squatting pan ‘Orissa’ pattern, size (580 x 440)mm, white, with integral foot rests and with ‘P’ or ‘S” trap, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe, etc with and including provision of lime concrete bedding, including making good to existing (floor / Tiles) complete all as specified and as directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, of capacity 10 Litres, with and including brackets & flush pipe, complete all as specified and directed.

S&F in repairs (600 mm X 450 mm) size bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm long etc, complete all as specified and as directed.

S/F in reapir vitreous china urinal full stall type of size 635x395x420mm white with partition (excluding flushing cistern, flush pipe) but connection and including 32mm PVC flexible waste pipe including all fitting in required length, complete all as specified and as directed.

S&F in repair pillar tap 15 mm dia cast copper alloy, fancy tpye with capstan heads, chromium pleted screwed down, high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe fixed,complete all as specified and as directed.

S&F in repair brass chromium plated fancy type wall mixer 15 mm bore for mixing hot & cold water screw down for iron pipe,complete all as specified and as directed.

S&F in repairs stop cock 15mm dia (concealed type), cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S&F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union of bore 15 mm, complete all as specified and as diredcted.

S&F in repairs glass shelf 600mm long including chromium plated guard bar, supporting clamps, screws etc, complete all as specified and as directed.

S&F in repairs stop valves 15mm dia (concealed type), cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed with long shank and cup complete all as specified and as directed.

S&F in repairs stop valves 15mm dia cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

M&L for applying two coats of white washing on ceiling including preparation of old plastered surfaces complete all as specified.

M&L for two coats of oil bound distemper on walls including preparation of old surfaces over a coat of primer complete all as specified and directed. .

S&F in repairs Soap dish holder ,stainless steel approximate size (160X160X90)mm fixed with chromium plated screw complete all as specified and as directed.

S&F in repairs of tubular towel rail aluminium anodised 20mm dia D type, 600mm long between flange etc complete all as specified and as directed.

S&F in repair stainless steel grating doom75mm/100mm square/round, complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required of internal dia of pipe 100 mm complete all as specified and as directed.

S&F 100mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to wall complete all as specified and as directed by Engr-in charge.

S&F CI bends diminishing pieces or tapers bore of pipe 100mm complete all as specified and as directed by Engr-in charge.

S&F CI bends diminishing pieces or tapers bore of pipe 75mm complete all as specified and as directed by Engr-in charge.

S&F Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof for 100mm bore,complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore ,complete all as specified and directed.

S&F GI tubing 15mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc),complete all as specified and directed.

S&F in repair ball valves of size 20mm bore dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site,complete all as specified and directed.

S&F 1000 litre capacity rotational moulded polyethylene water storage tank (Cylinderical vertical with close top) three layered, hoisted and fixed in position all as specified in SSR Part-I including dismantling of old water tanks and removing to store with and including provision of all GI inlet pipe, GI outlet pipe, GI overflow, GI drain pipe and anti mosquito cap with all fittings complete all as specified and as directed.

Taking down carefully copper/alluminium point, wiring (light, fan, socket or power) complete including fixtures and fitting such as switches, ceiling roses, pendants, regulator socket light fitting etc, removing materials to store for keeping in safe custody for or for taking credit (credit for above items should be made as per condition seperately) and makeing good disturbed surfaces of walls , floors etc.complete all as specified and as directed.

M&L for concealed point wiring complete with 1.5 sq mm FRLSH, PVC insulated multi stranded copper conductor single core cable 1100 volts grade,drawn into non metalic PVC rigid conduit medium grade of suitable size and conduit accessories fixed on wall, floor, roof etc. and including provision of PVC insulated 1.5 sq mm copper conductor for each continuity and connected to common earth dolly and pressed steel terminal boxes made out of 1.6 mm thick modular metal flush boxes concealed in wall and modular cover plate with frame for housing the switches socket outlet etc all as specified and directed by Engineer-in-Charge for one light point controled by one one way 6 Amp switch .complete all as specified and as directed. Note :- (i) Cost of PVC conduit, cutting chases of wall, making good disturbed wall surfaces including finishing with cement mortor (1:4), matching with existing colour/paint of surface are deemed to be included in the quoted rate.complete all as specified and as directed. (ii) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

S&F switch piano flush type 6 amps 230 volt single pole one way complete all as specified and as directed.

S&F ceiling rose surface bakelite three terminal (65 x 50)mm complete all as specified and as directed.

S&F in repair LED tube lights fitting 2 feet , 1x 10Watts, 220V, AC with LED tube complete,fixing on recess/surface etc,complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible cable of 0.75 sqmm 3 core copper conductor from ceiling rose to light fittings, complete all as specified and as directed.

S&F MCB SPN 32 Amps, 'C' series breaking capacity 10kA, 240 Volts, 50 Hz, and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F in repair exhaust fan made of sturdy Engineering plastic 250 mm sweep copper winding with louvers shutter, voltage 230V, 50 Hz, RPM 1200 and all asssesories including fixing connected with twin core twisted flexible copper conductor (23/0.0076) of size, complete all as specified and directed.