Indo Tibetan Border Police Tender

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 225 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes

Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms

Providing and fixing PTMT grating of approved quality and colour. Circular type 125 mm nominal dia with 25 mm waste hole

Providing and fixing of swan neck mixer and tap for steel sink make as approved by Engineer in charge

Kitchen cabinet : providing and fixing kitchen cabinets ,made out of 19mm hdhmr board for verticals, top, bottom and intermediate drawing. Back and top cabinet should be finished with 6mm thick Greenply Plywood Waterproof (BWP). Outer shutters are made out of 19mm board. Handles shall be of approved make and design. Skiriting : 100x19mm ply for skiriting all external /visible surface including top/back if exposed , shall be finished with 1.0mm acrylic of approved make shade. All internal surface of cabinet including top of shelves, sides etc. base box Action Tesa HDHMR 18mm thick with acrylic and outerside white finish. Hings soft close. Hettich brand. Handless with complete accessories. • Panel doors thickness 19mm. • Stainless steel perforated Sheet Modular Kitchen Basket/Storage Basket (size 20”x24” ) of approved. • With Labour and fitting. made overhead kitchen wall units above backside kitchen platform having box type overhead approx.. length of 1800 mm and 700 mm height and 325 mm depth as per following specification and sketches. The frame work or carcase includingfasia/ sides/bottom ,shelves etc shall be made out 19mm thick hdhmr board like green ply/century ply/ kit ply or equivaient of grade of boiling water proof and moisture resistant with acrylic of inside of0.6mm and 1.0 mm acrylic glossy finishpanel doors.

Supply and installation of Kitchen Chimney (suction-1250 m³/hr)of approved equivalent Size-90cm,Airflow-1250 cum/hr,touch control panel with digital display