Eastern Railway Tender

PL Code : 473017000015 Limit switch Oil tight and dust proof, die cast aluminum housing suitable for 415 Volts (or abo ve), 50 Hz, 10Amp. AC supply for quick braking, spring loaded lever with roller 01 No.+01 NC Auxiliary cont act with normal angular lever as per ESSEN model type LSRS or BCH catalogue Code No.-LLGS. Mat specn. I S-2147/ 1962(or latest), IES: 60947-5-1, IP-65 or similar of make- BCH or L&T or Jeevan/Schineider or SIEME NS or ESSEN. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee SSE/MCTR/JAMALPUR, ER Bihar 72.00 Numbers

PL Code : 473519920017 Two-way pendent type push button assly. With 2 nos of normally open inching type push butt on (indicated UP and DOWN button), suitable for 415V (or above) 10 amps (or above) with cable entry arra ngement through uPVC nipple as per SIEMENS model no 3SB5802-8AC3 or similar. Make: BCH/Schineider/Si emens/Essen/SNT [ Warranty Period: 30 Months after the date of delivery ] ] Consignee SSE/MCTR/JAMALPUR, ER Bihar 5.00 Numbers

PL Code : 669064360012 (A) Direct On line Starter with 2 sets of 3 pole / 4 pole contactors (2 sets AC contactor coils, 2 5 AMP each), each set controlled separately by 415V. 50HZ AC Contactor Coils. One set of contactor coil is t o be controlled by the forward direction of rotation through an inching type push button and the other set t hrough another inching button to control the reverse direction of 7.5 HP, 3Phase, 50HZ, 415Volts, AC Motor. There must be electrical interlocking contact to prevent both set of contactors to close simultaneously. Eac h of above push buttons should have one normally closed auxiliary contact and one stop push buttons are r equired. The starter shall be complete with over load, shall be wired and shall be provided with power plug and socket with locking arrangement as shown in schematic Drawing No. 1736/23 and 1737/23 Alt.-1. Each starter is to be provided with 2 Nos. power plug and sockets and 2 Nos. of control plug and sockets. Maxim um Dimension of the starter should not excessed 280mm (B) X 430mm (L) X 175mm (T) irrespective of Dim ension. Material Spec.: IS: 13947 Pt.-4 Sec.-1, 1993, Make: BCH or SIEMENS or Havells or Jeevan / SCHNEID ER or L&T. Qty. 1 no. (B)Supply & Fitment of Material for 7.5 HP DOL Starters (Individual) in SL No. (A)of 25T Universal JMP Jack Sl No. (i) Up indicating LED lamp 415V AC (Red) Qty-1 No. (ii) Down indicating LED lamp 415V AC (Red) Qty-1 No. (iii) Trip indicating lamp 415V AC (Amber) Qty-1 No. (iv) ) 415V AC 2NO+2NC FS-C 45MM Control Relay Qty-1 No. (v) 3 Phase (RYB) indicating LED lamp, (vi) Reset Button to release overload relay in case of tripping Qty-1 No. & (vii) 30A 3 way terminal block Qty-2 Nos. (1 set consisting of Sl No. i to vii), Make: BCH or SIEMENS or Havells or Jeevan / SCHNEIDER or L&T. (1 set consisting of Sl No. A & B). [ W arranty Period: 30 Months after the date of delivery ] ] Consignee SSE/MCTR/JAMALPUR, ER Bihar 24.00 Numbers