East Central Railway Tender

Supply of PBT ARA terminal as per IRS SPECN No. IRS:S-75-2006 (Rev-2)(latest).i) 6 way. (Insp.-RDSO).

Supply of track feed charger of input 110V AC, 50HZ, to charge 80 AH Lead Acid cell with boost and float mode.Spech. No. IRS-S-89-93 (latest):10 Amp for 03 Cell. (Insp.-Consignee).

Supply of B-Type choke coil having anneled enamelled copper wire for DC track circuit SPECN.No. IRS-S-65/83 (Latest) (Insp.-Consignee).

Supply of earth electrode. Materials to be procured as per E.Rly Sketch No.SGW/T/3/G/8/89. (Insp.-Consignee).

Installation of Double Wall Corrugated (DWC) pipe with socket coupler. This includes trenching (1.2 mtr. Depth) and back filling.

Key for E type lock. (Insp.-Consignee).

Supply of full size location box as per design of GKP signal workshop. (Insp.-Consignee). 23

Supply of half size location box as per design of GKP signal workshop. (Insp.-Consignee).

"Filling earth around location box/signal post/ any other foundation for a width of 0.5 m on all sides, upto a level of

Supply of slotted angle (40 x 40 x 2 mm) (Insp.-Consignee). 26

Supply of paper base hylum sheet 12 mm thick. (Insp.-Consignee).

Supply of Non deteriorating type low voltage cartridge fuse as per Spec. No. IRS/S/78/92. Round head type.i)4 Amp. Capacity. (Insp.-RDSO).

Supply of Non deteriorating type low voltage cartridge fuse as per Spec. No. IRS/S/78/92. Round head type.ii)6 Amp. Capacity. (Insp.-RDSO).

Supply of Non deteriorating type low voltage cartridge fuse as per Spec. No. IRS/S/78/92. Round head type.iv)16 Amp. Capacity. (Insp.-RDSO).

Transportation of HDT machine with accessories including handling of store materials preparation of site and boaring 38 for placing of 110mm dia HDPE/DWC pipe for crossing of S&T cable together at bridges/ culverts/ track/ pucca road crossing, boaring trench shall be minimum 3 (three) mtr meter below the river bed and 01 Mtr below the track/ road/ pucca road/ Crossing area. This includes supply of DWC/ HDPE pipe along with accessories for HDPE/DWC pipes, cost of fuel and all other items which will

Supply of Track Lead Junction Box(TLJB) as per Drg.No.RST-11509 or latest made from FRP material including brass bolts and hylam board sheet with terminals etc. The technical specifications are as follows: (a) TLJB complete with cover to be in black/red having approximate weight of 4.0 Kg with L-262mm W-212mm and H 90 mm and all the holes required for mounting on FRP stump (verticall two for each FRP angle) HDPE pipe , cable etc. (b) Each TLJB shall have two bakellite terminal block fitted horizontally : each bakellite terminal block shall have two nickel chrome plate M10 brass terminal, 50mm long.Alongwith each TLJB , nickel chrome plated brass links(two nos.0f adequate strength for vertical linking of the terminals to be supplied. (c) HDPE pipe of size 32/35mm , 380 mm long alongwith two nuts for fixing on the TLJB hole . (d) The FRP stump for mounting the TLJB to be made of one meter long 30mm X30mmX 4mm angle(2 nos.) and 300mm long 30mm X30mmX 4mm angle(1 no.) fixed at 50 mm from the

Provision of Track feed charger alarm system (Supply). (Insp.-Consignee).

Loading/Unloading and transporting of released, Scrap, Signalling materials from/to Sr. Sec. Engr./Sig./Store/ SPJ or Specified place by 09 MT Truck. (a) Loading /Unloading.

Supply of IRS Type point machine "D" barcket insulation complete set consisting of the following, Plate RH-S-3265- 1Nos,, Plate S-8804-1Nos, Bush S-23199-4 Nos, Bush S-8813-2Nos. as per technical specifications. (Insp.-Consignee).

Supply of Hot Dip Galvanised MS wire light coated diameter 4 mm (8 SWG) as per spec IS: 200/1978, Rev-IS 4826/1979 amendement no.- 1 to 3, first rev-2001.(Insp.-Consignee). (Insp.-Consignee).

Supply of channel Pin with single groove 7.2 mm Dia for 4 mm Dia bond wire to DRG. No. S-69/M & IRS Specn. IRS:S-

Supply of Drill Bit HSS 9/32" suitable for S&T work. (Insp.-Consignee).

Supply of Drill Bit HSS14mm,suitable for S&T work. (Bosch, Taparia or Tata make). Inspection: Consignee. (Insp.- Consignee).

Primary Cell SITEL for railway signaling and telecom application as per Specification no.IRS:S-95/96 Amd. - 1 or latest. (Insp.-Consignee).

Yellow Retro reflective Sheet for LC Boom intensity grade encapsulated grade prosmatic grade reflective shhet of size 305X290 mm one set consist 18 pieces. (Insp.-Consignee).

Timing Belt for locking L-98 (01 No.), for pedestal / hand generator L 277/285/300 (01 No.), Suitable for existing

Battery Operated Rail Drill machine with Li-ion battery including charger, with fitted suitable rail clamp, suitable for drilling 60 Kg rail. Make/Model-Eibenstock Make ERD35-2-V50.4 or similar. (Insp.-Consignee).

Modular disconnecting type terminal block (2 way) to suit RDSO Spec no.- RDSO/SPN/189/2004 (Wago or phonixer or

Supply of end and intermediate plate. (Insp.-Consignee).

Supply of Screwless end stop. (Insp.-Consignee).

Supply of Steel Carrier rail. (Insp.-Consignee).

Exposing of cable in the vicinity of track by excavating soil & ballast and then relaying and back filling to it in original state at one particular place.

Digging out of TLJB & its tail cable and back filling along with inserting it back. Also, determinating & its termination of wiring. This work is for one TLJB.

Digging out of Point JB & its cable after opening of wiring from ARA terminals & its reconnection of conductor in point JB and reinsertion along with back filling of point JB to it in original state. This work is for one point JB.

Web detectors for HASSDAC of GGTRONICS/CEL Make: 21KHZ/25 KHZ TX/RX coils assembly (01 Set Contains HASSDAC : 02 Nos. Tx , 02 Nos. RX Coil ) (As per Rly. Requirement). (Insp.-RDSO).

Supply, Installation of Thermo shrink joint kit for underground 6 Quad cable as per RDSO Spec. No. IRS TC-77-2012 (Rev. 3.0) Amend. 3 or latest for 6 Quad Cable. (i) Supply. (Insp.-Consignee).

Supply, Installation of Thermo shrink Jointing Kit (Spec No. Spec no. IRS TC-77-2000) for straight through cum derivation joints with VF transformer as per technical supplement for 6 Quad Cable. (ii) Installation.

Supply of permanentaly lubricated HDPE Telecom duct for use as underground optical fibre cable conduit size 40/33 mm(outer dia/inner dia) as per latest RDSO spec no RDSO/SPN/TC/45/2013 rev. With andt no 1.0 & 2.0 and with following

Blowing/Pulling of OFC cable through HDPE pipe already laid in the trenches.