East Central Railway Tender

Supply of FRP type TLJB(track lead junction box) fitted with 4-way ARA terminals with 4 Angle iron of Size (1500 x 50 x 50)mm & 6mm thick to hold the junction box and for fixing cable entry pipe (40x 500) mm. as per Spec.No.- RDSO/SPN/151/1997or latest. (ARA terminal Inspection- RDSO, TLJB-Inspection Consignee) 5

Installation of Track Lead Junction Box as per direction of site engineer

Supply of point JB fitted with 18 Nos. 1 way ARA PBT terminal block conforming to IRS - 6 S- 75/91 with 3 Nos. of 40mm Bore. GI pipe 600 mm long as per DRG No. SGW/MGS/ PT4/91 fixed on hard wood plank with U-channel (75 x 40 x 1500) mm for fixing. INSPECTION: Consignee, ARA PBT Terminals - RDSO.

Transpotation of materials by 15 MT Capacity Truck as per direction of site incharge..

Supply of clamp type track device (Axle counter) as per RDSO Specification no. RDSO/ SPN/ 177/ 2012Version 3.0 or Latest of 21 KHz/ 25KHz suitable for GG Tronics make. Inspection- RDSO

Supply of Tag Blocks 200/160/120 way with polycarbonate cover as per IRS S 77- 10 2006(Rev.1) RDSO DRG. No. SA 24751, SA 24752 & SA 24753. Requirement of each type shall be specified by Engineer-in-charge. Note- Material should be supplied along with Test certificate from OEM and his warranty certificate. Before supply, sample must be approved by consignee & controlling officer (INSPECTION: CONSIGNEE)

Supply of Tag Blocks 96/100 way with polycarbonate cover as per IRS S 77- 11 2006(Rev.1) Requirement of each type shall be specified by Engineer-incharge.Note- Material should be supplied along with Test certificate from OEM and his warranty certificate. Before supply, sample must be approved by consignee & controlling officer (INSPECTION: CONSIGNEE)

Transportation of less heavy material & man power supply & running of one muv to the 12 sites of work as per requirement & direction of engineer in charge along with driver. The rate includes all taxes ,license fee, road permit, driver wages, fuel, repair, & maintenance cost etc complete in all respects.

Supply, Installation and Commissioning of rail head continuity bond by pinbrazing as per RDSO Spn no. IRS: 103-2004 with latest amendment. as per technical specification attached. (INSPECTION: CONSIGNEE)

Supply, Installation and Commissioning of TLJB lead wire bond( 20 sq. mm. 2.5 mtrs long) by pinbrazing as per RDSO Spn no. IRS: 103-2004 with latest amendment. as per technical specification attached. (INSPECTION: CONSIGNEE)

Supply, Installation and Commissioning of TLJB lead wire bond ( 4.5 mtrs long) by pinbrazing as per RDSO Spn no. IRS: 103-2004 with latest amendment.as per technical specification attached.. (INSPECTION: CONSIGNEE)

Supply of Pre-fabricated signalling housing having outer dimension of 3000x3000x3080 mm made of 80 mm thick polyurethane foam sandwich panel for equipment/Relay room complete with doors electrometric water proffing, ventilators, exhaust fans etc. sun/rain guard, 16 PVC flooring, Twin tube lights, fans etc. Manufacturers test and guarantee certificate to be submitted by the contractor. This also includes execavation of trenches for foundation and construction of foundation as per fabricated building with all accessories supplied in items above on the foundation erected. All materials including cement and steel to be supplied by the contractor. Double locking arrangement to be provided in the door of relay room. (INSPECTION: CONSIGNEE)

Supply, installation and commissioing of Fuse auto change over system Type-I along with audio and visual indiation as per RDSOspec. no. RDSO/SPN/209/2012 ver 1.0 or latest. One 17 module off use alarm system should be able to cater for monitoring of 32 nos of "G" type or any other type off use 0.6 amp to 4 amp.Inspection by RDSO. Installation and commissioing of the FuseAuto changeover system Type-I along with supply of accessories i.e . Wires , terminals as per site requirement. Inspection- RDSO

Supply & Installation of Integrated multiplexer having FXO/FXS, Ethernet and E & M port (Specification to be complied as per Annexure-A) and special conditions as per Annexure-B. MODEL TEAM LINK TANSY Inspection- RITES

Supply installation, testing & commissioning of Data Logger System for Rly S&T. Installation as per RDSO Specification no. lRS:S:99/2006 with latest amendment with 2048 Digital input and 96 Analog inputs with, Dot matrix printer. Inspection - RDSO

"Supply and installation of modular power supply arrangement for VDU (42""- 85"") and embedded PC with input and output redundancy arrangement and hot pluggable modules having voltage & load current digital display on each module. Each set consisting of: - 1. Isolated inverters (master/slave with auto changeover) -2 Nos. input: 110VDC, output: 110 VAC, 500VA (as per RDSO TAN No. STS/E/TAN/3012 Version 3.0 Dated.03.11.22) 2. Isolated DC-DC converters - 02 Nos. connected in parallel with built in O-ring diode, active current sharing as per RDSO/SPN/165/2023 version 4.0 or latest (input: 110VDC, output:24 VDC/10A) 3. Input (redundancy) O-ring diode module with two input sources and one output supply along with potential free contacts, alarm and acknowledgment switch. 4. 3U stainless steel rack with back panel mother board and front panel power connectors, power cord for VDU panel. Make : Gallant or Similar Offered/Accepted Make M/S GALLANT POWER CONVERSION PVT.LTD./BENGALURU Inspection- RDSO"

Supply of Professional large format smart 4K LED display unit size 65" display 21 resolution 3840X2160,450 nits(UHD) including all fixing accessories with installation ,(port) USB/LAN/HDMI/VUA/Video out.Make-65XT800 ULTRA HD 4K UHD LED DISPLAY or similar. (INSPECTION: CONSIGNEE)

Supply of Microcontroller based programmable static switching module of naturally air 22 cooled only with an at a glance LCD display suitable for break-less switching between two DC supplies of UP to 40A for 20-110VDC. Note-Technical compliance of OEM along with Make & Model certificate as per attached format must be submitted with offer. (INSPECTION: RITES)

Supply of Diagonistic tool for Datalogger having specs Intel Dual core i5 Motherboard 23 1TB SATA HDD 8GB RAM COMBO DRIVE,21" TFT Monitor 10/100/1000 LAN CARD win XPP,Norten Anti Virus, Key Board, Optical Mouse, USB, Serial, Parrallol Port with JBL SPEAKER, 56 KBPS INTERNAL MODEM, WINDOWS 10 HOME VERSION WITH RECOVERY CD, ALONG WITH 500 VA UPS with HP Laser Jet A4 Printer Model No. 1020 or, Similar (INSPECTION: RITES)

"Installation, Erection & Wiring of CLS unit, Post, Ladder & Base, LED unit including paying out of tail cable from location box & earthing of CLS (LED type). This includes supply of non- metallic (FRP) colour light signal housing multi-unit type for Rly. signalling, suitable for RE area, 3 24 aspect complete without lenses, lamps and signal transformer as per drg. no. SA23002/A/M/ ADV. ALT-8 and per spec. no. RDSO/SPN/194/2006 (VER- 1.0) or latest and FRP material as RDSO spec. no. RDSO/SPN/ 151/ 1997 or latest. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note:- Signal should be compatible to 'LED' type. Inspection:- RDSO Note:- Installation, Erection & Wiring of signalling unit includes LED signal litghtening unit including Curretnt Regulator & Health Monitoring unit. This also includes protection of unit from rain water."

"Installation, Erection & Wiring of CLS unit, Post, Ladder & Base, LED unit including paying out of tail cable from location box & earthing of CLS (LED type). This includes supply of non- metallic (FRP) colour light signal housing multi-unit type for Rly. signalling, suitable for RE area, 2 25 aspect complete without lenses, lamps and signal transformer as per drg. no. SA23003/A/M/ADV.ALT- 8 and per spec. no. RDSO/SPN/194/2006 (VER- 1.0) or latest and FRP material as RDSO spec. no. RDSO/SPN/ 151/1997 or latest. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note:- Signal should be compatible to 'LED' type. Inspection:- RDSONote:- Installation, Erection & Wiring of signalling unit includes LED signal litghtening unit including Curretnt Regulator & Health Monitoring unit. This also includes protection of unit from rain water."

"Installation, Erection and wiring of Junction Type Route Indiator (LED type). This includes supply of non- metallic (FRP) Junction Type Route Indiator for Rly signalling suitable for RE area without lamp, lenses, signal transformer as per RDSO spec. no. RDSO/SPN/194/2006 (VER-1.0) or 26 latest. FRP material as per RDSO SPEWC no. RDSO/SPN/151/1997 or latest. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note:- Signal unit should be compatible to 'LED' type, Inspection - RDSO Note:- Installation, Erection & Wiring of signalling unit includes LED signal litghtening unit including Current Regulator & Health Monitoring unit. This also includes protection of unit from rain water."

Provision of Misc. S&T items required for installation of DLMC room at BJU. The detail is as below:-