All India Institute Of Medical Sciences Tender

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing aluminium sliding door bolts, ISI marked powder coated (powder coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm

Providing and fixing aluminium tower bolts, ISI marked, powder coated (powder coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm

Providing and fixing aluminium handles, ISI marked, powder coated (powder coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick pre laminated PVC door shutters

Providing and fixing factory made uPVC glazed/ wire mesh windows/ doors comprising of lead free uPVC multi- chambered frame, sash and mullion/ coupler (wherever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (whereever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia. with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/ mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh/ Glazing of plain/ toughened/ laminated/ double glass unit with/ without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (iii) Sites with basic wind speed 45 m/sec as per IS 875 - Part 3 (iv) Sites with structure height more than 20m for all wind speeds. Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (40mm & above) x (40mm & above) & sash (25mm & above) x (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 meter).

FLOORING Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

ROOFING Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. Single tee without door 110x110x110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm

FINISHING 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Dismantling and Demolishing Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

SANITARY INSTALLATIONS Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the wallswherever require: White Vitreous China Wash basin size 630x450 mmwith a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basincompletely recessed at the back for the reception of pipes andfittings.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto1 metre long with S.S. triangular plate to Eureopean type W.C. ofquality and make as approved by Engineer - in - charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete.Flexible pipe 40 mm dia

Providing and fixing mirror of superior glass (of approved quality) andof required shape and size with plastic moulded frame of approvedmake and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm

Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape withbracket of the same materials with snap fittings of approved qualityand colour, weighing not less than 105 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long,200 mm wide with minimum distances of 37 mm from wall face withconcealed fittings arrangement of approved quality and colour,weighing not less than 88 gms.

Providing and fixing white vitreous china extended wall mountingwater closet of size 780x370x690 mm of approved shape includingproviding & fixing white vitreous china cistern with dual flush fitting,of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres),including seat cover, and cistern fittings, nuts, bolts and gasket etccomplete.

WATER SUPPLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length

ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid separately)

Providing and fixing of SS 304 lock for frameless toughen glass of required size colour shape shade with necessary screw and fitting etc complete as per direction of engineer incharge

Providing and fixing of SS 304 Handle for frameless toughen glass of required size colour shape shade with necessary screw and fitting etc complete as per direction of engineer incharge.

Provinding and fixing of PVC flooring of 2 mm thick, laid on semi conductive adhesive base and self levelling compound complete in all respect as per specification and as per direction of Engineering-in-charge.(Tarkett, Armstrong or Equivalent as per approval of Engineer-in-Charge)

Providing and Fixing Finnesse Table - 6030 size shallbe 1800 width mm ×900 D mm ×740 H mm. Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate (bdl). Flat edge Duly Sealed with 2mm thick PVC beading. The modesty shall be 18 mm thick plain particle board () PPB with 1.0 mm thicjk decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. Free standing metal pedestal With castors for finnesse table Size 646H×390W×440D all complete as per direction of Engineer-in-Charge. Make-Godrej,Howarth,Durion or equaivalent as per approval of Engineer-in-Charge)

Providing and Fixing STYLO TABLE- Overall size Width - 1200mm Dedpt 600mm Height 750mm the top panel self be madefrom 18mm prelam particle Board3mm prelam MDF 3 Drawer all complete as per direction of Engineer-in-Charge. Make-Godrej,Howarth,Durion or equaivalent as per approval of Engineer-in-Charge)

Providing and fixing 12 mm thick frameless toughened glass panel of approved brand and manufacture, including providing and fixing all fitting for adjoining glass panels and making necessary holes etc required for fittings, all complete as per direction of Engineer-in-charge

Providing & installation of Mingle Modular Conference Table 36 Seater. Made of 25mm thick pre-laminate twin board of E1-p2 grade and approved shde conforming to IS-1283:1990 Edge banded with matching 2mm thick PVC lipping .olastic ABS access flap is provided for easy access to wires and cable. work top is avilable in varios shapes as known above. it consist of 18mm thick pre laminated twin board of E1-p2 grade and approved shde conforing to IS:12823:1990 edge banded with matching 2mm thick PVC lipping allumunim alloy 63400-W_p profile is used for connecting pannel together.the product has knock down construction made of18mm thk pre lam twinboard od E1_p2 gradeand apprived shade conforming to IS-12823:1990 edge banded with matching 2mm thk pvc lipping allcomplete as per direction of Engineer-in-Charge(.Make-Godrej,Howarth,Durion or equaivalent as per approval of Engineer-in-Charge)

Providing & installation of Mingle Modular Conference Table 12 Seater. Made of 25mm thick pre-laminate twin board of E1-p2 grade and approved shde conforming to IS-1283:1990 Edge banded with matching 2mm thick PVC lipping .olastic ABS access flap is provided for easy access to wires and cable. work top is avilable in varios shapes as known above. it consist of 18mm thick pre laminated twin board of E1-p2 grade and approved shde conforing to IS:12823:1990 edge banded with matching 2mm thick PVC lipping allumunim alloy 63400-W_p profile is used for connecting pannel together.the product has knock down construction made of18mm thk pre lam twinboard od E1_p2 gradeand apprived shade conforming to IS-12823:1990 edge banded with matching 2mm thk pvc lipping allcomplete as per direction of Engineer-in-Charge(.Make-Godrej,Howarth,Durion or equaivalent as per approval of Engineer-in-Charge)

Providing & installation of Mingle Modular stage Table 5 Seater. Made of 25mm thick pre-laminate twin board of E1-p2 grade and approved shde conforming to IS-1283:1990 Edge banded with matching 2mm thick PVC lipping .olastic ABS access flap is provided for easy access to wires and cable. work top is avilable in varios shapes as known above. it consist of 18mm thick pre laminated twin board of E1-p2 grade and approved shde conforing to IS:12823:1990 edge banded with matching 2mm thick PVC lipping allumunim alloy 63400-W_p profile is used for connecting pannel together.the product has knock down construction made of18mm thk pre lam twinboard od E1_p2 gradeand apprived shade conforming to IS-12823:1990 edge banded with matching 2mm thk pvc lipping all complete as per direction of Engineer-in-Charge(.Make-Godrej,Howarth,Durion or equaivalent as per approval of Engineer-in-Charge)

Supply & installation of marvel high back chair size 76.1cm w,76.1cm d,112.7-130.2cm height . The cusioned seat is made of injection molded plastic outer and inner,plastic inner is uphoistered with leatderite and moulded high resilience polyurethanefoam. The arm rest top os moulded from polyurethane upholslstered in leatherite and mounted onto adrop lift adjustment type tuber armrest support. the chair is 360 dig revolving type 5 position lilt timer giving option of variable lilt angle to chair all complete as per direction of Engineer-in-Charge.Make-Godrej,Howarth,Durion or equaivalent as per approval of Engineer-in-Charge)

Supply & installation of marvel mid back chair size 76.1cm w,76.1cm d,112.7-982cm height . The cusioned seat is made of injection molded plastic outer and inner,plastic inner is uphoistered with leatderite and moulded high resilience polyurethanefoam. The arm rest top os moulded from polyurethane upholslstered in leatherite and mounted onto adrop lift adjustment type tuber armrest support. the chair is 360 dig revolving type 5 position lilt timer giving option of variable lilt angle to chair. All complete as per direction of Engineer-in-Charge.Make-Godrej,Howarth,Durion or equaivalent as per approval of Engineer-in-Charge)

Supply & installation of marvel visitor chair the seat is made up of 1.2=0 1 cm thick hot pressed upholstered with fabric or synthetic leather and moulded polyurethane foam the back is made up 1.2 to thick hot presses polwood measured as per Qa method described in OCP-qlta-p14-18 AND UPHOLSTERED WITH REPLACED FABIC OR SYNTHETIC LEATHER UPHOSTREY COVER AND MOULDED POLYURETHANE FOAM THEBACK PLY AND FOAM IS DESIGNED WITH CONTROLED LUMBER SUPPORT FOR COMFORTABLE SEATING POSTURE All complete as per direction of Engineer-in-Charge.Make-Godrej,Howarth,Durion or equaivalent as per approval of Engineer-in-Charge)

Supply & installation impress main table shall be size 1800x1050x750mm hight. Top surface of the table shall made up of mdf board duly finish with veneer and final coating of pu. The main desk should contain in built key board pullout tray for keeping keyboard of computer, the copmuter. the front modesty pannel of the table shall be made up of mdf board of size 1640mmx 600x16xwich shall aslso be dily finish with veener and pu coating. for personal storage pedestal shallalso be made up of mdf duly finished with veener & final coating of Pu. the side shall be be of size 1200mm widthx445mm depthx660mm h the side unit shall be made up of mdf board duly finish with veeneer and final finish by pu coating the design of the side unit shall be shuch that it can be placed on either side of the main table the side unit shall contain openspace for keeping cpu in extreme right side one closed storage shutter at extreme left end & openspace in the middle with ine self for keeping files the thickness of the top ofvthe side unit shall be 25mm the the size of the back unit shall be 2215mm wx 410mm d 2000mm h the back unit shall be made up of MDF board dily finished with neneer & final finish by pu coating below storage shall be aprovide with wooden shutter &the upper left and right side of the back unit shakll also be provide with wooden shutter the middele 3 door shuttre should be glass of minium 5mm thick for display purpose the hardness of pu coating shall be 1.5H all complete as per direction of Engineer-in-Charge.Make-Godrej,Howarth,Durion or equaivalent as per approval of Engineer-in-Charge) Main Desk +ERU+padestal back unit

Back unit

Supply & installation pato plus 2str sofa of size 1270wx770dx780h made up of black shade pvc upholstery slab stock foam with recron filler spring webbing made up ofbklack shade pvc up pholstery slb stoc foam with recron filler spring webbing all complete as per direction of Engineer-in-Charge.Make-Godrej,Howarth,Durion or equaivalent as per approval of Engineer-in-Charge)

Supply & installation of alice Cofeetable over size : 100cm Dept: 65cm Height : 45cm Elegantly crafted in wood and metal combination float glass top. The material used for dimension (+/-2mm) of 1000x650x450 the color of the table is cherry. The table is paper lamited with MDF Board , toughted glass all complete as per direction of Engineer-in-Charge.Make-Godrej,Howarth,Durion or equaivalent as per approval of Engineer-in-Charge)

ALMIRAH Storwel Plain shall have an overall size of 916mm (w)x486mm(D)x1980 mm(H)with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8 mm, Door thickness of 0.8 mm (high yield strength) and allother components shall have a thickness of 0.9 mm.These components shall made of CRCA 'D' grade high yiels strength as per IS:513.The store plain should have a mazak handle and three way locking mechanism with shooting bolts bolts. It should have a height wise adjustable shelf mounting which shall have a uniformly distributed load capacity of maximum 40 KG.It should also have M10 Screw type levelled with hex plastic base. The finishing shall include epoxy epoxy powdercoated to thickness of 50 micron (+- 10). Palanty of colour options and shelving options shall be available.all complete as per direction of Engineer-in-Charge.Make-Godrej,Howarth,Durion or equaivalent as per approval of Engineer-in-Charge)

Supply and installation of side table for flower pot Top surface of the table shall made up of mdf board duly finish with veneer and final coating of pu.all complete as per direction of Engineer-in-Charge.Make-Godrej,Howarth,Durion or equaivalent as per approval of Engineer-in-Charge)

Supply and installation of audio conference system with Ahuja 1 nos chairman mike and 23 delegate mike, 1 nos central amlifire, 4 nos wall speaker, conference wire, speaker wire, studiomaster cordless mike (Dualhand), 1 nos studiomaster servo stabllizer 1 nos 9U rack also installation tranpotation etc as required. Make - AHUJA/STUDIOMASTER/JABRA

Supply and installation of 1 nos 86" Android Quad core 4 GB Ram 32 GB Room front light sensor, front smart port USB 2.0, 20-point touchscreen, 2 trip 4K UHD resolution, built in MVBA Display & device manager 10W*2 speaker front facing ( support windos ink with wall mount kitt wire etc as required Make - VIEWSONIC/Benq/Vestel)

Electrical Work Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 20 mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 amps switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amp socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.3 Module (100mmX75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 6 Module (200mmX75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 8 Module (125mmX125mm)

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supply and fixing of 18 watt LED square/ round surface light make( Wipro/havells/Syska/Anchor)

Supply and fixing of 36 watt 2x2 surface / down light make( Wipro/havells/Syska/Anchor)

Supply and fixing of 18/ 20 watt 1200 mm batten light make( Wipro/havells/Syska/Anchor)

300 mm Exhaust Fan make( Bajaj/ Havells/Crompton)

HVAC Work Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.