Water Resources Department Tender

Supply of Geo Bags Type-B (Size 2.00 m × 1.50 m inner to inner) (Pillow Type) made of composite layers of Polypropylene (PP) fibre as per IS 16653:2017 for Nonwoven and IS 16654:2017 for Woven: Woven Geo-textile for the outer cover (300gsm): The woven geo textile is woven with multifilament woven fabric manufactured from ultra violet stabilized polypropylene. Geo-textile used to manufacture geo-textile bags should have high mechanical properties for enhanced durability along with enhanced puncture, abrasion and U.V. resistance characteristics. Geo-textile should be inert to biological degradation and resistant to naturally encountered chemicals, alkalis, and acids. Properties i. Tensile strength (MD) ≥ 80 KN/m & Tensile strength (CD) ≥ 70 KN/m; ii. Elongation (MD) ≤ 25% & Elongation (CD) ≤ 25%; iii. Abrasion ≥ 75%; iv. Trapezoidal Tear Strength (MD) ≥ 1500N & Trapezoidal Tear Strength (CD) ≥ 1300N; v. CBR Puncture strength ≥ 900N; vi. Permeability ≥ 18 l/m2/sec; vii. AOS ≤ 250 micron; viii. UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80%; ix. Mass ≥ 300 gm/m²; x. Seam strength ≥ 50 % of actual fabric strength. Non-Woven Geo-textile for the inner layer (300gsm): It is needle punched non-woven geo-textile made of 100% polypropylene staple fibres which are formed into a random network for dimensional stability. It should resist UV degradation, rotting and alkalis. Properties i. Wide Tensile strength (MD) ≥ 15 KN/m & Wide Tensile strength (CD) ≥ 15 KN/m; ii. Elongation (MD) ≥ 50% & Elongation (CD) ≥ 50%; iii. Abrasion ≥ 95%; iv. Trapezoidal Tear Strength (MD) ≥ 340 N & Trapezoidal Tear Strength (CD) ≥ 340 N; v. CBR Puncture strength ≥ 3000 N; vi. Permittivity ≥ 1.25 s-1; vii. Permeability ≥ 60 l/m2/sec; viii. AOS ≤ 75 micron; ix. UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80%; x. Mass ≥ 300 gm/m²; xi. Thickness at 2KPa ≥ 3 mm; xii. Seam strength ≥ 80 % of actual fabric strength. Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge. (Bags are to be supplied of 15 numbers in a bundle, properly packed with each bag having proper tag with name of Manufacturer, Batch Number, the GSM and type of polymer encrypted and stitched on top corner and each bag is to be marked with “WRD Govt. of ASSAM” to be printed distinctly. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material)

Supply of non-woven Geo-textile fabric sheets of 300 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as per IS 16653: 2017 • Wide Tensile strength (MD) ≥ 15kN/m & Wide Tensile strength (CD) ≥ 15kN/m • Elongation (MD) ≥ 50% & Elongation (CD) ≥ 50% • Abrasion ≥ 95% • Trapezoidal Tear Strength (MD) ≥ 340 N & Trapezoidal Tear Strength (CD) ≥ 340 N • CBR Puncture strength ≥ 3000 N • Permittivity ≥ 1.25 s-1 • Permeability ≥ 60l/m2/sec • AOS ≤ 75micron • UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80% • Mass ≥ 300gm/m² • Thickness at 2KPa ≥ 3 mm. (Each Roll of Geo Fabric Sheet should be supplied in properly packed Bundles and should be marked with the Name of Manufacturer, Batch Number & its dimensions clearly on each roll with “WRD Govt. of ASSAM” to be printed on it and mentioning properly the GSM and type of polymer and Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material).

Supply of Sewing Thread/Yarn PPMF Stitching Thread (2000 Den. Kaplon)

Supply of Galvanized Wire Netting Sheet made of 8 SWG wire 152 mm square mesh in sheet 2.57 m × 1.66 m with longitudinal wire at 152 mm centre and 76 mm projection of each wire on all sides beyond the net size of 2.42 m × 1.5 m having knots of 12 SWG at every joints, weight of each sheet should not be less than 6.3 Kg/sheet.

Labour charge for laying Geo fabric sheet as filter bellow pitching including carrying, lapping, wrapping & stitching as directed by the Engineer-in-Charge.

Filling and laying of Geo bags of size 1.03 m × 0.70 m including excavation of sand/silt of size more than 80 micron from flood plain or adjacent chars within a distance of 90 m of the work site, filling geo bags with sand/silt having minimum weighing 126.00 Kg and minimum volume 0.084 Cum after filling, double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150 m and laying properly as directed. (Geo Bag and Polypropylene thread will be supplied by the department free of cost) Without Boat

Filling and laying of Geo bags of size 1.03 m × 0.70 m including excavation of sand/silt of size more than 80 micron from flood plain or adjacent chars within a distance of 90 m of the work site, filling geo bags with sand/silt having minimum weighing 126.00 Kg and minimum volume 0.084 Cum after filling, double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150 m and laying properly as directed. (Geo Bag and Polypropylene thread will be supplied by the department free of cost) With Engine Boat

Filling and laying in cage with sand/silt filled Geo bags of size 1.03 m × 0.70 m including excavation of sand/silt from flood plain or adjacent chars within a distance of 90 m of the work site, filling geo bags with sand/silt having minimum weighing 126.00 Kg and minimum volume 0.084 Cum after filling, double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150 m and laying properly. in cages made of wire netting sheets of size 2.57 × 1.66 m of 8 G galvanized wire making the cage from 2 nos. of wire netting sheet by tying the projected wires complete as directed. (Geo Bag, Wire Netting Sheets / cage and Polypropylene thread will be supplied by the department free of cost) Without Boat

Filling and laying of nonwoven Geo - textile bag of dimension 2.00 m × 1.50 m including excavation of sand/silt from flood plain or adjacent chars within a distance of 90 m of the work site, filling geo bags with sand/silt, having minimum volume 0.612 Cum after filling, double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, laying at proper site including all handling charges and local carriage within a distance of 100 m complete as directed. (Geo Bag and Polypropylene thread will be supplied by the department free of cost) With Engine Boat

Supply of Pre stressed Cement Concrete (PSC) Porcupine members of size 0.10 m × 0.10 m × 3.00 m with M - 30 grade of cement concrete conforming to IS 1343:2012 using super-plasticizer @1.2 lit/bag of cement with graded broken coarse aggregates up to 20 mm size down conforming to IS 10262:2009 & IS 456:2000 and reinforced with 4 nos. of 4 mm dia. high tensile steel wire cable/strand with necessary cover and 4 mm high tensile stirrups at 250 mm C/C, in conformity with IS-6403:R2002 and stressed to required strength not exceeding 9.18 N/mm, holes of 16 mm dia. at 50 cm inside from both ends in the same face and in either face of post another 2 nos. of holes of size 16 mm dia. at 65 mm inside from both ends including properly curing for 21 (Twenty one) days and carriage of porcupine members from factory to the stack yard within a distance up to 50 Km including loading, unloading & stacking complete as directed.

Labour charge for launching of PSC Porcupine including carriage of PSC porcupine members of size 0.10 m × 0.10 m × 3.00 m from the stack yard to the place of launching, erection of the Porcupine with 6 (Six) members properly, supply & fitting/fixing with 12 mm dia. 25 Cm long M.S. Nuts and bolts and launching the porcupine properly as directed. (Lead up to 150 m) (a) Launching without boat

Labour charge for launching of PSC Porcupine including carriage of PSC porcupine members of size 0.10 m × 0.10 m × 3.00 m from the stack yard to the place of launching, erection of the Porcupine with 6 (Six) members properly, supply & fitting/fixing with 12 mm dia. 25 Cm long M.S. Nuts and bolts and launching the porcupine properly as directed. (Lead up to 150 m) (b) Launching With boat