Water Resources Department Tender

Carriage of Geo Bags of size 1.03 x 0.70 m including loading & unloading, Stacking, etc. complete and including hire charge of truck with driver and handyman cost of POL etc. completed as directed. (distance to be calculated from Divisional Store) Distance to work site = 23.00 Km

Filling and laying of Geo bags of size 1.03m X 0.70m including excavation of sand/silt of size more than 80 micron from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand/silt having minimum weighing 126.00 Kg and minimum volume 0.084 Cum after filling ,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly as directed. (Geo Bag and Polypropylene thread will be supplied by the department free of cost) Without boat

Supply of Geo Bags Type-B (Size 2.00m × 1.50m inner to inner) (Pillow Type) made of composite layers of Polypropylene (PP) fibre as per IS 16653: 2017 for Nonwoven and IS 16654 : 2017 for Woven: Woven Geo-textile for the outer cover (300gsm): The woven geo textile is woven with multifilament woven fabric manufactured from ultra violet stabilized polypropylene. Geo-textile used to manufacture geo textile bags should have high mechanical properties for enhanced durability along with enhanced puncture, abrasion and U.V. resistance characteristics. Geo-textile should be inert to biological degradation and resistant to naturally encountered chemicals, alkalis, and acids. Properties (i) Tensile strength (MD) ≥80 KN/m & Tensile strength (CD) ≥70 KN/m (ii) Elongation (MD) ≤25% & Elongation (CD) ≤25% (iii) Abrasion ≥75% (iv) Trapezoidal Tear Strength (MD) ≥1500N & Trapezoidal Tear Strength (CD) ≥1300N (v) CBR Puncture strength ≥900N (vi) Permeability ≥18 l/m2/sec(vii) AOS ≤250 micron (viii) UV Resistance @500 hours retained Tensile strength (MD) & (CD) ≥80% (ix) Mass ≥300 gm/m²(x) Seam strength ≥50 % of actual fabric strength. Non-Woven Geo-textile for the inner layer (300gsm): It is needle punched non-woven geo-textile made of 100% polypropylene staple fibres which are formed into a random network for dimensional stability. It should resist UV degradation, rotting and alkalis. Properties (i) Wide Tensile strength (MD) ≥15 KN/m & Wide Tensile strength (CD) ≥15 KN/m (ii) Elongation (MD) ≥50% & Elongation (CD) ≥50% (iii) Abrasion ≥95% (iv) Trapezoidal Tear Strength (MD) ≥340 N & Trapezoidal Tear Strength (CD) ≥340 N (v) CBR Puncture strength ≥3000 N (vi) Permittivity ≥1.25 s-1 (vii) Permeability ≥60 l/m2/sec(viii) AOS ≤75 micron (ix) UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥80% (x) Mass ≥300 gm/m²(xi) Thickness at 2 KPa ≥3 mm(xii) Seam strength ≥80 % of actual fabric strength. Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge. (Bags are to be supplied of 15 numbers in a bundle, properly packed with each bag having proper tag with name of Manufacturer, Batch Number, the GSM and type of polymer encrypted and stitched on top corner and each bag is to be marked with “WRD Govt of ASSAM” to be printed distinctly. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material)

Carriage of Geo Bags of size 2.00 x 1.50 m including loading & unloading , Stacking cost of P.O.L. ,etc. complete and including hire charge of truck with driver and handyman, etc. completed as directed. (distance to be calculated from Divisional Store) Distance to work site = 23Km Rate = Rs. 0.096

Filling and laying of nonwoven Geo-textile bag of dimension 2.00mx1.50m including excavation of sand/silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand/silt, having minimum volume 0.612 Cum after filling, double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, laying at proper site including all handling charges and local carriage within a distance of 100m complete as directed. (Geo Bag and Polypropylene thread will be supplied by the department free of cost) With Engine Boat

Supply of Sewing Thread/Yarn PPMF Stitching Thread (2000 Den. Kaplon) i/c payment of taxes

Supply of non-woven Geo-textile fabric sheets of 300 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as per IS 16653: 2017 (i) Wide Tensile strength (MD) ≥15KN/m & Wide Tensile strength (CD) ≥15KN/m (ii) Elongation (MD) ≥50% & Elongation (CD) ≥50% (iii) Abrasion ≥95% (iv) Trapezoidal Tear Strength (MD) ≥340 N & Trapezoidal Tear Strength (CD) ≥340 N (v) CBR Puncture strength ≥3000 N (vi) Permittivity ≥1.25 s-1 (vii)Permeability ≥60l/m2/sec (viii)AOS ≤75micron (ix)UV Resistance @500 hours retained Tensile strength (MD) & (CD) ≥80% (x) Mass ≥ 300gm/m² (xi)Thickness at 2KPa ≥3mm. (Each Roll of Geo Fabric Sheet should be supplied in properly packed Bundles and should be marked with the Name of Manufacturer, Batch Number & its dimensions clearly on each roll with “WRD Govt of ASSAM” to be printed on it and mentioning properly the GSM and type of polymer and Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material).

Carriage of 300 gsm Geo sheet of including loading & unloading , Stacking cost of P.O.L., etc. complete and including hire charge of truck with driver and handyman, etc. completed as directed. (distance to be calculated from Divisional Store) Distance to work site = 23.00 Km Rate = Rs. 0.013

Labour charge for laying Geo fabric sheet as filter bellow pitching including carrying, lapping, wrapping & stitching as directed by the Engineer-in-Charge.

Construction and supply of Wire -netting box of size 1.50 m × 1.50 m × 0.45 m made with mechanically woven, double twisted, hexagonal shaped wire mesh with wire made of low carbon, high ductile MS wire with heavy class of galvanization with an additional layer of PVC coating with mesh type of 10 × 12 as per EN 10223 & ASTM A975, mesh wire of 2.70 mm (I.D) /3.70 mm (OD) tensile strength of 450-500/mm2, edge wire selvedge around it at least 2.5 times, lacing wire (zinc PVC coated ) of 2.20mm (I.D) /3.20mm (OD), VC coating thickness of 0.50mm nominal, 0.38 mm minimum, Mesh opening size 150mm × 150mm and with average weight per unit being 12 kg with additional 3% of the weight of box for lacing wire supplied separately, supporting the facing of the box with zinc coated steel wire of required length as directed, complying with ASTM and European norms.

Filling and laying in cage with sand/silt filled Geo bags of size 1.03m X 0.70m including excavation of sand/silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand/silt having minimum weighing 126.00 Kg and minimum volume 0.084 Cum after filling ,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly. in cages made of wire netting sheets of size 2.57x1.66m of 8G galvanized wire making the cage from 2 nos. of wire netting sheet by tying the projected wires complete as directed. (Geo Bag, Wire Netting Sheets and Polypropylene thread will be supplied by the department free of cost) Without Boat

Earth work in excavation of drainage channel by mechanical means to the proper grade and slopes as required including disposing the excavated debris/soil to a safe distance of minimum 50 m distance, etc. complete as directed. For lead up to 50 m and all lifts. - Normal soil

Earth work in excavation by hydraulic excavator, to proper grade and slopes as required including utilizing the spoils for filling works in the vicinity including removing roots & vegetation, dressing to design section etc. complete as directed. Ordinary Soil , For depth up to 3.00m

Collection and supply of broken stone metal of size 13 mm. to 38 mm in average free from dust, dirt and other foreign materials including local carriage and stacking in regular measurable stacks of approximate 1(one) m. height at quarry site, payment of forest royalty, etc complete as directed.

Labour charge for making filter bed of required thickness with stone metal of size 13 mm to 38 mm over the trimmed surface of river bank/embankment, slope, including site carriage of metal within a distanceof 150 m etc. complete as directed.

Earth work in filling by mechanical means by deploying hydraulic excavator and trippers etc. including ramming with locally available ordinary soil excluding rocky soil with all lead and lift, transporting to site, spreading, dressing as per design section including ploughing or roughening or benching the seats, removing all debris, breaking clods up to 2.5cm cube, etc. complete as directed. (12.5 % deduction will be made from the section measured quantities of the completed and compacted earth work on account of shrinkage)For initial lead upto 1 Km and for all lifts

Construction of temporary shed of two roof with mud plinth of 0.45 m height above ground level with Bhaluka bamboo post 1.5 m apart, driven at atleast 0.75 m below ground and height above plinth of 2.5m. Split Jatti bamboo/tarza wall 10 cm thick touch roofing over bamboo rua frame, placing at 0.15 m clear apart, fitted with bamboo kamies from binding doors and windows with Bamboo Chattai, strengthening with Bamboo frame binding with wire, roofing with TATA Shaktee roofing sheets etc., complete as directed. (Using Bhaluka Bamboo at the rate of 6.00 nos/ Rm & Jati Bamboo at the rate of 61.00nos / Rm)

Ordinary/Unskilled Labours

RCC Guard Post: Supplying, fitting and fixing RCC guard post 150cm long erected 75cm above the ground and 75cm below the ground with M-15 grade (nominal mix 1:2:4 with broken stone aggregate up to 20mm size) of cement concrete and required reinforcement tied in position with annealed black wire including centering, moulding the top, curing including painting concrete surfaces in 23cm strips upto 0.75m from the top alternately in black and white and having 2 nos. reflective band of desired shade etc. complete as per design and as directed. (b)15 cm dia. RCC guard post with reinforcement of 4nos. 12mm dia TMT main steel bars and 6mm TMT/ MS stirrups at 15cm c/c.