Urban Development Department Tender
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Costs
EMD
₹ 3,20,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_UDD_15422_1Bid Award Id
ViewTender No
ASHB/Tech/1142/2019Tender Authority
Urban Development Department ViewPurchaser Address
-Website
http://eproc.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Construction and Renovation works of Rangachahi College, Majuli
BOQ Items
a) In ordinary soil
120.46
-
-
Earth/Sand filling in plinth in layers not more than 150 mm thk. including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensati -on, Forest Roalty, Sales Tax and other duties and taxes as may be necessary
-
-
-
I) With silt (Predominantly non plastic ) by truck carriage including loading and unloading .
183
-
-
Plain Cement Concrete works.
-
-
-
Plain cement concrete work with coarse aggregate of sizes 13mm to 32mm in foundation bed for footings, steps, walls, brick work etc. as directed and specifoed including dewatering if necessary and curing complete (shuttering where necessary shall be be measured and paid separately)
-
-
-
a) In Prop. 1 cement : 3 Sand : 6 Coarse agg. by volume
5.02
-
-
Providing and laying plain/reinforced cement concrete work with coarse sand & 20 mm down graded stone aggregate including dewatering if necessary and curing complete supply of materials but excluding cost of form work and reinfircement for reinforced cement concrete work ( form work and reinforcement will be measured and paid separately )
-
-
-
(I) Using mixture machine
-
-
-
(A ) In sub-structure upto plinth level.
-
-
-
I) Foundations, footings, columns with base tie and plinth beam, grade beam ,pile cap ,base slab, retaining wall, walls of septic tank, inspection pit and the like and other works not less than 100mm thick upto plinth level.
-
-
-
N) Without using admixture, plasticiser
-
-
-
b) M 20 grade concrete or Prop 1:1.5:3
33.87
-
-
B ) In super structure from plinth level up to 1st floor level..
-
-
-
ii ) Columns, pillars, posts, struts, suspanded floor, roof, landing, shelf and support, balcony, lintel,sill band , beam, girder, cantilever,staircase (except spiral staircase and landing) including preparing of top surface and finishing of nosing.
-
-
-
N) Without using admixture, plasticiser
-
-
-
b) M 20 grade concrete or Prop 1:1.5:3
67.86
-
-
N) Without using admixture, plasticiser
-
-
-
Providing and laying 25 mm thick damp proof course with cement concrete in prop. 1:1.5:4 with graded stone aggregate of 10mm down nominal size including providing approved damp proff mixture in prop. as recomended by the manufacturer including curing etc. complete as directed.
16.14
-
-
BRICK WORK
-
-
-
Providing brick soling in foundation and under floor with stone/ best quality picked jhama bricks, sand packed and laid to level and in panels after preparing the surface as directed including all labour and materials and if necessary dewatering complete .
-
-
-
a) Brick on flat soling
339.06
-
-
Brick work in cement mortar with 1st class brick including racking out joints and dewatering if necessary and curing complete as directed in sub structure upto plinth level.
-
-
-
(I) In Sub-structure upto plinth level including dewatering if necessary
-
-
-
b) In proportion 1:4
15.71
-
-
1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in in super structure above plinth upto first floor level (protruding M.S. rod / Tor steel of column to be embeded in cement morter and will be measured and paid separately)
-
-
-
(A) 112 mm thick brick wall
-
-
-
a) In cement morter in proportion 1:4( 1 cement :4 sand)
258.36
-
-
SHUTTERING AND FORM WORK
-
-
-
Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. hight of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for insitu reinforced cement concrete and plain concrete work in
-
-
-
Foundation, footing, base of columns, pile cap, raft and mass concrtete works etc.
-
-
-
a) Using 38 mm thick plank
51.75
-
-
Sides of tie beams, plinth beams, grade beams etc.at or below ground level
-
-
-
(a)) Using 38 mm thick plank
64.32
-
-
Columns, pillars ,posts & strut
-
-
-
a) Square, Rectangular, polygonal in plan or any shape like Tee/ L etc having plane vertical face.
-
-
-
I) Using 38 mm thick plank
49.14
-
-
(b) Circular or curved in plan (Using 38mm thick plank)
23.74
-
-
Sides and soffits of beams, beam haunching, cantilever girders, bressumers, lintels and horizontal ties
-
-
-
a) For depth not exceeding 1.0M
-
-
-
I) Using 38 mm thick plank
108
-
-
iii) Flat surface such as soffits of suspended floors, roofs, landings, cantilever slabs, chajjas balconies and the like.
-
-
-
a) Floors etc. upto 200 mm in thickness
-
-
-
I) Using 38 mm thick plank
279.36
-
-
Vertical ties, fins, sun breaker, louvers, band, dropwalls etc.
-
-
-
I) Using 38 mm thick plank
2.5
-
-
Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank)
38.6
-
-
Providing form work of 12 mm thick plywood board and removal of the same in edges of slabs and breaks in floors and walls etc. of in -situ reinforced concrete works upto 1st floor level.
-
-
-
a) Thickness not exceeding 200mm
12.44
-
-
PLASETRING AND POINTING
-
-
-
15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.
-
-
-
A) On rough side
-
-
-
b) In cement mortar 1:4
258.36
-
-
B) On fair side
-
-
-
b) In cement mortar 1:4
707.3
-
-
Extra for plastering on ceiling and soffits of stair up to 1st floor level including curing complete as directed.
-
-
-
I) Ground floor
399.8
-
-
FLOORING :
-
-
-
65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed.
244
-
-
Cement plaster skirting with cement mortar ( 1 cement : 3 coarse sand ) finished with a floating coat of neat cement including rounding of juctions with floor.
-
-
-
b) 20 mm thick .
31.36
-
-
Kota-stone slab flooring of 18 mm thick over 20mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
-
-
-
(2) 600mm x 900mm and above
115.67
-
-
Kota stone slab of 18 mm thick in riser of steps, skirting, dado and pillars laid with 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete.
-
-
-
(2) 600mm x 900mm and above
17.93
-
-
Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)
-
-
-
a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make
-
-
-
ii) Of size 600mmx600mm and above
150.32
-
-
WOOD WORK
-
-
-
Providing wood work in frames (chowkat) of doors, windows, clearstory windows and other similar works wrought, framed and fixed in position in contact with C.C. or brick masonry walls including supplying, fitting and fixing with nails, screws, bolts and nuts complete with M.S. plate hold fasts (4mm X 3mm X 250mm) as per design and embeded in cement concrete block in prop. 1:1:4 and with 2 coats of kiricide oiling to the timber faces in contact with C.C. and masonry as directed and specified.
-
-
-
a) With sal wood
0.65
-
-
Providing and fixing flush door shutters solid core construction with frame of first class hard wood with cross bend and face veneered plywood face panels conforming to relevant I.S. Code including oxidised iron butt hinges (100X75X3.5mm) 6 nos. with necessary wood screws.
-
-
-
a) Decorative type face panel and block board core .
-
-
-
I) 40 mm thick
20.16
-
-
Providing, fitting and fixing coloured anodised aluminium sliding windows and ventilators of standard sections of approved brand (HINDALCO/NALCO/BALCO/JINDAL/OTHER equivalent primary producer ) without horizontal glazing bars,joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels.
-
-
-
a) 3 track sliding window .
-
-
-
ii) 5 mm frosted glass
43.2
-
-
STEEL AND IRON WORK
-
-
-
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.
(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level)
-
-
-
a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL
-
-
-
(ii)Super Ductile (SD) TMT reinforcement bars
119.79
-
-
Providing, fitting and fixing M.S. Grill of required pattern for winddows / clearstory windows / openings with M.S. flats at required spacing and farmed alround square or round M.S. bars with round headed bolts and nuts or screws.
-
-
-
a) Ornamental Grill
-
-
-
c) Fixed to brickwork/ P.C.C/R.C.C.
518.4
-
-
Applying primary coat over new steel and other metal surfaces upto 100 mm in width or grith after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wood scrappers and sand paper.
-
-
-
a) With ready mixed red lead red oxide primer
108
-
-
Painting two coats ( excluding priming coat ) on new steel and other metal surfaces with enamel paint of approved brand and manufacture( Asian paint/Berger paint/ICI paint/ J &Npaint/Nerolac to give an even shade including cleaning the surface of all dirt, dust and other foreign matter .
-
-
-
(I) Surfaces over 100 mm in width or girth
-
-
-
b) High gloss ( Asian paint/ Berger paint/ ICI paint / J& N paint / Nerolac)
108
-
-
Applying priming coat over new wood based surfaces over 10 cm in width/grith after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting.
-
-
-
a) With ready mixed paint, wood primer ( white).
50.4
-
-
Painting two coats ( excluding priming coat ) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of ditrt, dust and other foreign material , sand papering and stopping
-
-
-
(I) Surfaces over 100 mm in width or girth
-
-
-
a) High gloss (Asian Paint/ Berger Paint /ICI paint/ J& N paint /Nerolac
50.4
-
-
Providing two coats of acrylic water based wall putty/ wall filter of Asian Paints/ Berger/Dulux (ICI)/ Nerolac over concrete/cement plaster/ brick walls ( internal )and after removing all the loosely adhering material from the wall/ceiling surface with the help of emerey stone ,putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.
1008.5
-
-
c) Applying one coat of distemper primer of approved brand and manufacture on wall surfaces after thoroughly brushing the surface free from mortar drops and other foreign matter and including preparing the surface even and sand papered smooth.
1008.5
-
-
Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.
-
-
-
(a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)
1008.5
-
-
a) Providing one coat of cement primer( on ext. wall) of approved brand and manufacture on new surfaces after thoroughly brooming the surface preparing the surface even and sand papered smooth.
215.52
-
-
Finishing old /new wall with water proofing weather coat smooth anti-fungal premium textured exterior finish , finish of Sandex Matt brand of Snowcem India Ltd. Of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels ( two coats)
215.52
-
-
MISCELLANEOUS
-
-
-
Pre construction antitermite treatment at the bottom of foundation of foundation pits and walls on either side up to a height of 300m.m. from bottom of the excavation made for column ,plinth beam, wall trenches etc. by applying the emulsion @ 5 litres per sq.mt. Of the surface area before starting construction work( supplying of necesary tools and accessories by the contractor) as per the direction of the Department complete.
-
-
-
a)with aquous emulsion having concentration 1:19 with chloropirophose solution (tricel or equivalent) and water ,I,e, 1% solution.
244
-
-
Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.
47.04
-
-
Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.
-
-
-
ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.
50
-
-
Supplying, fitting and fixing alluminum fittings of approved make reasonably smooth, free from sharp edges, flows and other defacts with counter sunk holes for screws including necessary aluminium screws etc. complete ( annodised to a bright natural mat or stain finish).
-
-
-
I) 300 X 16 mm
12
-
-
b) Tower bolt
-
-
-
I) 300 X 12 mm
12
-
-
ii) 250 X 12 mm
7
-
-
c) Door handle
-
-
-
I) 150 mm
7
-
-
I) 100 mm
7
-
-
e) Butt hinge v ) 100 mm x75mmx 4mm
14
-
-
Name of Scheme:Construction of Computer Center( Ground Floor) and Technologically enabled Class Room( First Floor) in the Rangachahi Collerge , Majuli.i , Assam under new construction schemes of RUSA for the year 2018-2019 .
-
-
-
Providing and laying plain/reinforced cement concrete work with coarse sand & 20 mm down graded stone aggregate including dewatering if necessary and curing complete supply of materials but excluding cost of form work and reinfircement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately )
-
-
-
(I) Using mixture machine
-
-
-
ii ) Columns, pillars, posts, struts, suspanded floor, roof, landing, shelf and support, balcony, lintel,sill band , beam, girder, cantilever,staircase (except spiral staircase and landing) including preparing of top surface and finishing of nosing.
-
-
-
N) Without using admixture, plasticiser
-
-
-
b) M 20 grade concrete or Prop 1:1.5:3
94.82
-
-
Extra over item Nos.2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level.
94.82
-
-
BRICK WORK
-
-
-
1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in in super structure above plinth upto first floor level (protruding M.S. rod / Tor steel of column to be embeded in cement morter and will be measured and paid separately)
-
-
-
(A) 112 mm thick brick wall
-
-
-
a) In cement morter in proportion 1:4( 1 cement :4 sand)
445.27
-
-
Extra for brick walling for each subsequent floor or part thereof above the 1st floor level.
445.27
-
-
SHUTTERING AND FORM WORK
-
-
-
Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. hight of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for insitu reinforced cement concrete and plain concrete work in
-
-
-
Columns, Pillars , Posts & Strut
-
-
-
a) Square, Rectangular, polygonal in plan or any shape like Tee/ L etc having plane vertical face.
-
-
-
I) Using 38 mm thick plank
95.76
-
-
Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no.3.2.1 & 3.2.3(b).
95.76
-
-
(b) Circular or curved in plan (Using 38mm thick plank)
23.74
-
-
Sides and soffits of beams, beam haunching, cantilever girders, bressumers, lintels and horizontal ties
-
-
-
a) For depth not exceeding 1.0M
-
-
-
I) Using 38 mm thick plank
166.28
-
-
Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no.3.2.1 & 3.2.3(b).
166.28
-
-
iii) Flat surface such as soffits of suspended floors, roofs, landings, cantilever slabs, chajjas balconies and the like.
-
-
-
a) Floors etc. upto 200 mm in thickness
-
-
-
I) Using 38 mm thick plank
405.1
-
-
Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no.3.2.1 & 3.2.3(b).
405.1
-
-
Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank)
38.6
-
-
Providing form work of 12 mm thick plywood board and removal of the same in edges of slabs and breaks in floors and walls etc. of in -situ reinforced concrete works upto 1st floor level.
-
-
-
a) Thickness not exceeding 200mm
16.2
-
-
Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no.3.2.1 & 3.2.3(b).
16.2
-
-
PLASETRING AND POINTING
-
-
-
15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.
-
-
-
A) On rough side
-
-
-
b) In cement mortar 1:4
445.27
-
-
Extra over item on 6.2.1 to 6.2.3 for interior plastering above 1st floor level for every addl floor or part there of including curing complete as directed.
445.27
-
-
(a) On Single coat plaster
-
-
-
B) On fair side
-
-
-
b) In cement mortar 1:4
1271.67
-
-
Extra over item on 6.2.1 to 6.2.3 for interior plastering above 1st floor level for every addl floor or part there of including curing complete as directed.
-
-
-
(a) On Single coat plaster
1271.67
-
-
Extra for plastering on celling and soffits of stair up to 1st floor level (instead of plastering on walls) including curing complete as directed.
826.4
-
-
FLOORING, PAVING AND ROOFING :
-
-
-
40 mm thick cement concrete floor consisting of 25 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 12.5 mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) finished with a floating coat of neat cement finish using cement slurry for bond @ 2.75 kg. per square metre of floor area , wearing layer is to be laid in panels including curing etc. complete as directed.
422.74
-
-
Cement plaster skirting with cement mortar ( 1 cement : 3 coarse sand ) finished with a floating coat of neat cement including rounding of juctions with floor.
-
-
-
b) 20 mm thick .
43.2
-
-
Kota-stone slab flooring of 18 mm thick over 20mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
-
-
-
(2) 600mm x 900mm and above
91.64
-
-
Kota stone slab of 18 mm thick in riser of steps, skirting, dado and pillars laid with 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete.
-
-
-
(2) 600mm x 900mm and above
4.74
-
-
Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)
-
-
-
a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make
-
-
-
ii) Of size 600mmx600mm and above
165.71
-
-
WOOD WORK
-
-
-
Providing wood work in frames (chowkat) of doors, windows, clearstory windows and other similar works wrought, framed and fixed in position in contact with C.C. or brick masonry walls including supplying, fitting and fixing with nails, screws, bolts and nuts complete with M.S. plate hold fasts (4mm X 3mm X 250mm) as per design and embeded in cement concrete block in prop. 1:1:4 and with 2 coats of kiricide oiling to the timber faces in contact with C.C. and masonry as directed and specified.
-
-
-
a) With sal wood
0.63
-
-
Providing and fixing flush door shutters solid core construction with frame of first class hard wood with cross bend and face veneered plywood face panels conforming to relevant I.S. Code including oxidised iron butt hinges (100X75X3.5mm) 6 nos. with necessary wood screws.
-
-
-
a) Decorative type face panel and block board core .
-
-
-
I) 40 mm thick
12.6
-
-
STEEL AND IRON WORK
-
-
-
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for RCC work / RB walling including straightening, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete ( upto first floor level ).
-
-
-
a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL
-
-
-
(ii)Super Ductile (SD) TMT reinforcement bars
111.65
-
-
Extra over item 18.1.1(a,b,c) for each subequent floor or part thereof above first floor level.
111.65
-
-
Providing, fitting and fixing M.S. Grill of required pattern for winddows / clearstory windows / openings with M.S. flats at required spacing and farmed alround square or round M.S. bars with round headed bolts and nuts or screws.
-
-
-
II) Ornamental Grill
-
-
-
C) Fixed to brickwork /P.C.C./R.C.C.
557.55
-
-
Providing, fitting and fixing coloured anodised aluminium sliding windows and ventilators of standard sections of approved brand (HINDALCO/NALCO/BALCO/JINDAL/OTHER equivalent primary producer ) without horizontal glazing bars,joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels.
-
-
-
a) 3 track sliding window .
-
-
-
ii) 5 mm frosted glass
32.4
-
-
Applying primary coat over new steel and other metal surfaces upto 100 mm in width or grith after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wood scrappers and sand paper.
179.44
-
-
a) With ready mixed red lead red oxide primer
-
-
-
Painting two coats ( excluding priming coat ) on new steel and other metal surfaces with enamel paint of approved brand and manufacture( Asian paint/Berger paint/ICI paint/ J &Npaint/Nerolac to give an even shade including cleaning the surface of all dirt, dust and other foreign matter .
-
-
-
(I) Surfaces over 100 mm in width or girth
179.44
-
-
b) High gloss ( Asian paint/ Berger paint/ ICI paint / J& N paint / Nerolac)
-
-
-
Applying priming coat over new wood based surfaces over 10 cm in width/grith after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting.
-
-
-
a) With ready mixed paint, wood primer ( white).
31.5
-
-
Painting two coats ( excluding priming coat ) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of ditrt, dust and other foreign material , sand papering and stopping
-
-
-
(I) Surfaces over 100 mm in width or girth
-
-
-
b) High gloss (Asian Paint/ Berger Paint /ICI paint/Nerolac
31.5
-
-
Providing two coats of acrylic water based wall putty/ wall filter of Asian Paints/ Berger/Dulux (ICI)/ Nerolac over concrete/cement plaster/ brick walls ( internal )and after removing all the loosely adhering material from the wall/ceiling surface with the help of emerey stone ,putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.
1392.94
-
-
Applying one coat of distemper primer of approved brand and manufacture on wall surfaces after thoroughly brushing the surface free from mortar drops and other foreign matter and including preparing the surface even and sand papered smooth.
1392.94
-
-
Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.
-
-
-
(a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)
1392.94
-
-
Providing one coat of cement primer( on ext. wall) of approved brand and manufacture on new surfaces after thoroughly brooming the surface preparing the surface even and sand papered smooth.
324
-
-
Finishing old /new wall with water proofing weather coat smooth anti-fungal premium textured exterior finish , finish of Sandex Matt brand of Snowcem India Ltd. Of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels ( two coats)
324
-
-
HARDWARE FITTINGS
-
-
-
Supplying, fitting and fixing anodised alluminium fittings of approved make reasonably smooth, free from sharp edges, flows and necessary aluminium screws etc. complete ( annodised to a bright natural mat or stain finish ).
-
-
-
a) Sliding door bolts
-
-
-
I) 300 X 16 mm
12
-
-
b) Tower bolt
-
-
-
I) 300 X 12 mm
12
-
-
ii) 150 X 10 mm
12
-
-
c) Door handle
-
-
-
I) 150 mm
12
-
-
ii) 100 mm
6
-
-
e) Butt hinge v) 100 mm x75mmx 4mm
44
-
-
SANITARY WORKS
-
-
-
Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified.
-
-
-
a) In exposed surfaces or in trenches.
-
-
-
(ii) 110mm dia
52.2
-
-
Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.
-
-
-
a) In exposed surfaces or in trenches
-
-
-
ii) 110 mm dia.
10
-
-
Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.
-
-
-
a) In exposed surfaces or in trenches
-
-
-
ii) 110 mm dia.
10
-
-
Supplying fiting and fixing PVC plain single tee of (Supreme /Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.
-
-
-
a) In exposed surfaces or in trenches
-
-
-
ii) 110 mm dia.
5
-
-
Providing fitting and fixing 100 mm dia PVC Cowel with ISI make complete as directed and specified.
5
-
-
INTERNAL ELECTRIFICATION WORK
-
-
-
Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete
-
-
-
b)Medium point upto 6.00mtr length
40
-
-
c)Long point upto 10.00mtr length
35
-
-
Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.
-
-
-
b)Medium point upto 6.00mtr length
15
-
-
Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt./ Havells make), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.)
-
-
-
Extra long point up to 25.00 metre. Length.
10
-
-
Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.
-
-
-
With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
63
-
-
With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
55
-
-
With 2 x 16 sq. mm. + earth continuity with 1x10 sq. mm. cable in 32 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
45
-
-
Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
12 way SPN double door
2
-
-
Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
6 way TPN (4+18) double door
2
-
-
Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
B Series
(Schneider MG, legrand, Hager make)
-
-
-
6 to 32A
20
-
-
Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
B Series
(Schneider MG, legrand, Hager make)
-
-
-
6 to 32A
20
-
-
Supplying with fitting and fixing SPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
B Series
(Schneider MG, legrand, Hager make)
-
-
-
63A
2
-
-
MCCB with Thermal & Magnetic Release
-
-
-
Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt.
-
-
-
25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make)
-
-
-
16A
1
-
-
63A
1
-
-
Supplying including fitting and fixing of high speed AC Ceiling fan complete with all accessories like , down rod, canopy etc.of following sweeps with making necessary connection etc.as reqd complete and directed by the deptt.(Without regulator)
-
-
-
a) 1400mm sweep
25
-
-
Installation ,testing and commissioning of ceiling fan including the regulator, down rod of standard size(up to 300mm length) and connection etc complete as specified and directed by the department.
25
-
-
Supplying and fixing Call bell(Buzer) including 5 Amps capacity flush type bell push switch including connections as approved by the Deptt as required .
4
-
-
Supplying fitting and fixing of single wall brackets model 37712 (or equivalent as approved by the Deptt.) on the wall in GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover with all accessories including connection as required complete. Without lamp.
6
-
-
Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as ballast, starter etc. directly on wall / ceiling including connection as approved by the Deptt.)with 1.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed by the department.
-
-
-
Striplite luminaries complete with VPIT copper ballast/ Electronic ballast and decorative end cap and 1 X 36 / 40 watt Fluorescent tube.(Crompton Greaves make) Model- DSG1114LDB CROMGOLD / DSG1114LDBN CROM GOLD NEW / DSG1314EB CG GOLD / DSG 1414EB PLANET GOLD with Super Saver / Super Brite Lamp. Or equivalent (Equivalent will be selected by the deptt considering the mother items rate) PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make.
16
-
-
WVF 53414 SGW 4 x 14 W FTL T5) Recess mounted indirect- direct luminaries with High Efficiency Translucence (HET) Technology suitable for FTL T5) Lamps. Or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (equivalent PHILIPS/ JAQUAR make).
2
-
-
Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) .
-
-
-
185.00 Sq.mm 4 Core U.G. cable in 80 mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)
15
-
-
Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .
2
-
-
Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.
2
-
-
Supplying & laying of 8 SWG Copper. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.
3
-
-
Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.
3
-
-
Supplying & laying of 25x4 mm size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.
3
-
-
Supply, fitting & fixing of Lighting Finial Arrestor made of 25 mm dia 300 mm long solid Copper tube having 85 mm dia. single prong at top and 3 mm thick base plate at bottom complete with fitting & fixing with Brass nuts & bolts on roof, RCC slab, top of column etc. as specified and directed by the deptt.
1
-
-
Supply, fitting & fixing 20 mmx5 mm G.I. strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of G.I. Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode G.I. strips and Lightning Arrestor etc. as specified and directed by the deptt.
6
-
-
Supplying and installation and commissioning of vermin and dust proof totally enclosed double door cubical type compartmental floor mounting panel board of size 1.20 m ×1.00 m ×0.50 m made of 16 SWG1.66mm) thick CR sheet and 35 mm × 35 mm × 6 mm size angle and 35 mm ×6 mm flat iron having 4 nos legs at the bottom and G.I. Sheet reefing on the top complete painting with 2 coats of red oxide metal primer and 2 coats of enameled paint. The panel board is to be erected in 1:3:6 RCC pole foundation including excavation of trench and brick soling etc. complete neatly internal wiring done as specified and directed by the department comprising of the following electrical items.
-
-
-
1. 40 Amp 4 pole 415 Volt 50 Hz MCCB as incomer - 1 no
-
-
-
2. 32 Amp 2 pole open execution with HBC fuse SDFU unit as outgoing - 3 nos.
-
-
-
3. 25 mm × 5 mm size 4 strip copper Bus-Bar- 1 set
-
-
-
4. 40 Amp 4 pole ON-OFF poser contactor - 1 No.
-
-
-
5. Surface mounting timer switch - 1 No.
-
-
-
6. 63 Amp bakelite HBC fuse kit-kat - 3 Nos
-
-
-
7. 0-40 Amp electro-mechanical counter display 3 Phase 4 wire electronic hybrid energy meter
1
-
-
Name of Scheme:Renovation of Existing Library ( Ground Floor) and Assam Type 1st floor in the Rangachahi Collerge , Majuli , Assam .
-
-
-
Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels.
203.04
-
-
Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels.
-
-
-
(i) Area of door/window up to 3.00 m2
12
-
-
Earth work in excavation for foundation trenches of walls, retain -ing walls, footings of columns, steps, septic tanks etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all leads and lifts as directed and specified in following classification of soils including bailing out water where necessary as directed and specified.
-
-
-
I) Upto a depth of 2m below the existing ground level .
-
-
-
a) In ordinary soil
11.81
-
-
Earth/Sand filling in plinth in layers not more than 150 mm thk. including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensati -on, Forest Roalty, Sales Tax and other duties and taxes as may be necessary
-
-
-
I) With silt (Predominantly non plastic ) by truck carriage including loading and unloading .
54.18
-
-
Plain Cement Concrete works.
-
-
-
Plain cement concrete work with coarse aggregate of sizes 13mm to 32mm in foundation bed for footings, steps, walls, brick work etc. as directed and specifoed including dewatering if necessary and curing complete (shuttering where necessary shall be be measured and paid separately)
-
-
-
a) In Prop. 1 cement : 3 Sand : 6 Coarse agg. by volume
0.59
-
-
Providing and laying plain/reinforced cement concrete work with coarse sand & 20 mm down graded stone aggregate including dewatering if necessary and curing complete supply of materials but excluding cost of form work and reinfircement for reinforced cement concrete work ( form work and reinforcement will be measured and paid separately )
-
-
-
(I) Using mixture machine
-
-
-
(A ) In sub-structure upto plinth level.
-
-
-
I) Foundations, footings, columns with base tie and plinth beam, grade beam ,pile cap ,base slab, retaining wall, walls of septic tank, inspection pit and the like and other works not less than 100mm thick upto plinth level.
-
-
-
N) Without using admixture, plasticiser
-
-
-
b) M 20 grade concrete or Prop 1:1.5:3
8.49
-
-
B ) In super structure from plinth level up to 1st floor level..
-
-
-
ii ) Columns, pillars, posts, struts, suspanded floor, roof, landing, shelf and support, balcony, lintel,sill band , beam, girder, cantilever,staircase (except spiral staircase and landing) including preparing of top surface and finishing of nosing.
-
-
-
N) Without using admixture, plasticiser
-
-
-
b) M 20 grade concrete or Prop 1:1.5:3
17.87
-
-
N) Without using admixture, plasticiser
-
-
-
Providing and laying 25 mm thick damp proof course with cement concrete in prop. 1:1.5:4 with graded stone aggregate of 10mm down nominal size including providing approved damp proff mixture in prop. as recomended by the manufacturer including curing etc. complete as directed.
7.44
-
-
BRICK WORK
-
-
-
Providing brick soling in foundation and under floor with stone/ best quality picked jhama bricks, sand packed and laid to level and in panels after preparing the surface as directed including all labour and materials and if necessary dewatering complete .
-
-
-
a) Brick on flat soling
115.54
-
-
Brick work in cement mortar with 1st class brick including racking out joints and dewatering if necessary and curing complete as directed in sub structure upto plinth level.
-
-
-
(I) In Sub-structure upto plinth level including dewatering if necessary
-
-
-
b) In proportion 1:4
7.83
-
-
1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in in super structure above plinth upto first floor level (protruding M.S. rod / Tor steel of column to be embeded in cement morter and will be measured and paid separately)
-
-
-
(A) 112 mm thick brick wall
-
-
-
a) In cement morter in proportion 1:4( 1 cement :4 sand)
49.6
-
-
SHUTTERING AND FORM WORK
-
-
-
Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. hight of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for insitu reinforced cement concrete and plain concrete work in
-
-
-
Foundation, footing, base of columns, pile cap, raft and mass concrtete works etc.
-
-
-
a) Using 38 mm thick plank
30.24
-
-
Sides of tie beams, plinth beams, grade beams etc.at or below ground level
-
-
-
(a)) Using 38 mm thick plank
39.68
-
-
Columns, pillars ,posts & strut
-
-
-
a) Square, Rectangular, polygonal in plan or any shape like Tee/ L etc having plane vertical face.
-
-
-
I) Using 38 mm thick plank
47.88
-
-
Sides and soffits of beams, beam haunching, cantilever girders, bressumers, lintels and horizontal ties
-
-
-
a) For depth not exceeding 1.0M
-
-
-
I) Using 38 mm thick plank
47.12
-
-
iii) Flat surface such as soffits of suspended floors, roofs, landings, cantilever slabs, chajjas balconies and the like.
-
-
-
a) Floors etc. upto 200 mm in thickness
-
-
-
I) Using 38 mm thick plank
59.52
-
-
Providing form work of 12 mm thick plywood board and removal of the same in edges of slabs and breaks in floors and walls etc. of in -situ reinforced concrete works upto 1st floor level.
-
-
-
a) Thickness not exceeding 200mm
5.9
-
-
PLASETRING AND POINTING
-
-
-
15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.
-
-
-
A) On rough side
-
-
-
b) In cement mortar 1:4
54.56
-
-
B) On fair side
-
-
-
b) In cement mortar 1:4
120.03
-
-
Extra for plastering on ceiling and soffits of stair up to 1st floor level including curing complete as directed.
-
-
-
I) Ground floor
65.47
-
-
FLOORING :
-
-
-
65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed.
90.3
-
-
Cement plaster skirting with cement mortar ( 1 cement : 3 coarse sand ) finished with a floating coat of neat cement including rounding of juctions with floor.
-
-
-
b) 20 mm thick .
15.73
-
-
Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)
-
-
-
a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make
-
-
-
ii) Of size 600mmx600mm and above
86.4
-
-
Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section of approved brand with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels.
-
-
-
(i) 6mm clear glass
30.24
-
-
Providing, fitting and fixing coloured anodised aluminium sliding windows and ventilators of standard sections of approved brand (HINDALCO/NALCO/BALCO/JINDAL/OTHER equivalent primary producer ) without horizontal glazing bars,joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels.
-
-
-
a) 3 track sliding window .
-
-
-
ii) 5 mm frosted glass
51.84
-
-
Providing, fitting and fixing anodised aluminium partition walls of standard sections of approved brand, joints mitred and welded (manufactured to relevant I.S. specification) and providing and fitting angle cleat, rubber gasket, bolting device screws etc. at all levels.
-
-
-
(i)Partly 6mm thick glass panes and 12mm prelaminated ply board
120
-
-
STEEL AND IRON WORK
-
-
-
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.
(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level)
-
-
-
a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL
-
-
-
(ii)Super Ductile (SD) TMT reinforcement bars
31.04
-
-
Providing, fitting and fixing M.S. Grill of required pattern for winddows / clearstory windows / openings with M.S. flats at required spacing and farmed alround square or round M.S. bars with round headed bolts and nuts or screws.
-
-
-
a) Ornamental Grill
-
-
-
c) Fixed to brickwork/ P.C.C/R.C.C.
777.6
-
-
Providing and fixing 25mm thick wooden shutters for cup board including black enamelled M.S butt hinges (75mmx 40mmx1.12mm) 6 nos. with necessary wood screws (fully panelled)
-
-
-
(ii) Using Particle/Block bord
-
-
-
f) With block board (one side Teak and other sidecommercial 19mm/20mm thick)
165
-
-
Applying primary coat over new steel and other metal surfaces upto 100 mm in width or grith after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wood scrappers and sand paper.
-
-
-
a) With ready mixed red lead red oxide primer
178.82
-
-
Painting two coats ( excluding priming coat ) on new steel and other metal surfaces with enamel paint of approved brand and manufacture( Asian paint/Berger paint/ICI paint/ J &Npaint/Nerolac to give an even shade including cleaning the surface of all dirt, dust and other foreign matter .
-
-
-
(I) Surfaces over 100 mm in width or girth
-
-
-
b) High gloss ( Asian paint/ Berger paint/ ICI paint / J& N paint / Nerolac)
178.82
-
-
Providing two coats of acrylic water based wall putty/ wall filter of Asian Paints/ Berger/Dulux (ICI)/ Nerolac over concrete/cement plaster/ brick walls ( internal )and after removing all the loosely adhering material from the wall/ceiling surface with the help of emerey stone ,putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.
241.64
-
-
c) Applying one coat of distemper primer of approved brand and manufacture on wall surfaces after thoroughly brushing the surface free from mortar drops and other foreign matter and including preparing the surface even and sand papered smooth.
241.64
-
-
Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.
-
-
-
(a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)
241.64
-
-
a) Providing one coat of cement primer( on ext. wall) of approved brand and manufacture on new surfaces after thoroughly brooming the surface preparing the surface even and sand papered smooth.
77.95
-
-
Finishing old /new wall with water proofing weather coat smooth anti-fungal premium textured exterior finish , finish of Sandex Matt brand of Snowcem India Ltd. Of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels ( two coats)
77.95
-
-
MISCELLANEOUS
-
-
-
Pre construction antitermite treatment at the bottom of foundation of foundation pits and walls on either side up to a height of 300m.m. from bottom of the excavation made for column ,plinth beam, wall trenches etc. by applying the emulsion @ 5 litres per sq.mt. Of the surface area before starting construction work( supplying of necesary tools and accessories by the contractor) as per the direction of the Department complete.
-
-
-
a)with aquous emulsion having concentration 1:19 with chloropirophose solution (tricel or equivalent) and water ,I,e, 1% solution.
90.3
-
-
Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.
23.6
-
-
Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.
-
-
-
ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.
39.33
-
-
Supplying, fitting and fixing alluminum fittings of approved make reasonably smooth, free from sharp edges, flows and other defacts with counter sunk holes for screws including necessary aluminium screws etc. complete ( annodised to a bright natural mat or stain finish).
-
-
-
I) 300 X 16 mm
7
-
-
b) Tower bolt
-
-
-
I) 300 X 12 mm
7
-
-
ii) 250 X 12 mm
7
-
-
c) Door handle
-
-
-
I) 150 mm
7
-
-
I) 100 mm
7
-
-
e) Butt hinge v ) 100 mm x75mmx 4mm
14
-
-
FIRST FLOOR
-
-
-
Providing and laying plain/reinforced cement concrete work with coarse sand & 20 mm down graded stone aggregate including dewatering if necessary and curing complete supply of materials but excluding cost of form work and reinfircement for reinforced cement concrete work ( form work and reinforcement will be measured and paid separately )
-
-
-
(I) Using mixture machine
-
-
-
ii ) Columns, pillars, posts, struts, suspanded floor, roof, landing, shelf and support, balcony, lintel,sill band , beam, girder, cantilever,staircase (except spiral staircase and landing) including preparing of top surface and finishing of nosing.
-
-
-
N) Without using admixture, plasticiser
-
-
-
b) M 20 grade concrete or Prop 1:1.5:3
9.58
-
-
Extra over item Nos.2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level.
9.58
-
-
BRICK WORK
-
-
-
1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in in super structure above plinth upto first floor level (protruding M.S. rod / Tor steel of column to be embeded in cement morter and will be measured and paid separately)
-
-
-
(A) 112 mm thick brick wall
-
-
-
a) In cement morter in proportion 1:4( 1 cement :4 sand)
161.37
-
-
Extra for brick walling for each subsequent floor or part thereof above the 1st floor level.
161.37
-
-
SHUTTERING AND FORM WORK
-
-
-
Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. hight of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for insitu reinforced cement concrete and plain concrete work in
-
-
-
Columns, Pillars , Posts & Strut
-
-
-
a) Square, Rectangular, polygonal in plan or any shape like Tee/ L etc having plane vertical face.
-
-
-
I) Using 38 mm thick plank
30.78
-
-
Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no.3.2.1 & 3.2.3(b).
30.78
-
-
Sides and soffits of beams, beam haunching, cantilever girders, bressumers, lintels and horizontal ties
-
-
-
a) For depth not exceeding 1.0M
-
-
-
I) Using 38 mm thick plank
36.2
-
-
Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no.3.2.1 & 3.2.3(b).
36.2
-
-
PLASETRING AND POINTING
-
-
-
15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.
-
-
-
A) On rough side
-
-
-
b) In cement mortar 1:4
177.51
-
-
Extra over item on 6.2.1 to 6.2.3 for interior plastering above 1st floor level for every addl floor or part there of including curing complete as directed.
177.51
-
-
(a) On Single coat plaster
-
-
-
B) On fair side
-
-
-
b) In cement mortar 1:4
244.49
-
-
Extra over item on 6.2.1 to 6.2.3 for interior plastering above 1st floor level for every addl floor or part there of including curing complete as directed.
-
-
-
(a) On Single coat plaster
244.49
-
-
FLOORING, PAVING AND ROOFING :
-
-
-
40 mm thick cement concrete floor consisting of 25 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 12.5 mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) finished with a floating coat of neat cement finish using cement slurry for bond @ 2.75 kg. per square metre of floor area , wearing layer is to be laid in panels including curing etc. complete as directed.
90.3
-
-
Cement plaster skirting with cement mortar ( 1 cement : 3 coarse sand ) finished with a floating coat of neat cement including rounding of juctions with floor.
-
-
-
b) 20 mm thick .
15.24
-
-
Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)
-
-
-
a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make
-
-
-
ii) Of size 600mmx600mm and above
86.4
-
-
Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section of approved brand with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels.
-
-
-
(i) 6mm clear glass
30.24
-
-
Providing, fitting and fixing coloured anodised aluminium sliding windows and ventilators of standard sections of approved brand (HINDALCO/NALCO/BALCO/JINDAL/OTHER equivalent primary producer ) without horizontal glazing bars,joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels.
-
-
-
a) 3 track sliding window .
-
-
-
ii) 5 mm frosted glass
51.84
-
-
WOOD WORK
-
-
-
Providing wood work in frames (chowkat) of doors, windows, clearstory windows and other similar works wrought, framed and fixed in position in contact with C.C. or brick masonry walls including supplying, fitting and fixing with nails, screws, bolts and nuts complete with M.S. plate hold fasts (4mm X 3mm X 250mm) as per design and embeded in cement concrete block in prop. 1:1:4 and with 2 coats of kiricide oiling to the timber faces in contact with C.C. and masonry as directed and specified.
-
-
-
a) With sal wood
0.16
-
-
Providing and fixing flush door shutters solid core construction with frame of first class hard wood with cross bend and face veneered plywood face panels conforming to relevant I.S. Code including oxidised iron butt hinges (100X75X3.5mm) 6 nos. with necessary wood screws.
-
-
-
a) Decorative type face panel and block board core .
-
-
-
I) 40 mm thick
5.04
-
-
STEEL AND IRON WORK
-
-
-
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for RCC work / RB walling including straightening, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete ( upto first floor level ).
-
-
-
a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL
-
-
-
(ii)Super Ductile (SD) TMT reinforcement bars
7.52
-
-
Extra over item 18.1.1(a,b,c) for each subequent floor or part thereof above first floor level.
7.52
-
-
Providing, fitting and fixing M.S. Grill of required pattern for winddows / clearstory windows / openings with M.S. flats at required spacing and farmed alround square or round M.S. bars with round headed bolts and nuts or screws.
-
-
-
II) Ornamental Grill
-
-
-
C) Fixed to brickwork /P.C.C./R.C.C.
136.22
-
-
Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications.
-
-
-
a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997
23.12
-
-
Providing Pre Painted Galvalume Sheet Roofing (PPGL) at all levels including fitting and fixing self drilling, self tapping screws complete (Roof trusses, purlins etc. to be measured and paid separately.)
-
-
-
TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement
-
-
-
(iii) 0.45mm thick
163.59
-
-
Providing Pre Painted Galvalume Sheet (PPGL) accessories ( Ridges / Valley / Gutter / Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete.
TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement
-
-
-
(iii) 0.45 mm thick
12.2
-
-
Gypboard Ceiling
-
-
-
Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. Perimeter channels of size 0.55 thick (having one flange of 20 mm and another flange of 30 mm and a web of 27mm) along with perimeter of ceiling ,screw fixed to brick wall /partition with the help of nylon sleeves and screws at 610 mm c/c. Then suspending G.I. Intermediate channels of size 45 mm (0.9 mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25 mm x10mm x 0.55 mm thick fixed to soffit with G.I. Cleat and steel expansion fasteners. Ceiling section of 0.55 mm thickness having knurled web of 51.5 mm and two equal flanges of 26 mm each with lips of 10.5 mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channels at 298 mm c/c. Then 12.5 mm thick square edge FuLtone/Sundance/Cratone/Louvertone/Textured Gypboard panels of size 595mmx 595mm (conforming to IS: 2095-1982 ) is then screw fixed to ceiling section with 25 mm long drywall screws at 290 mm c/c .Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment .Finally ,the boards are to be jointed and finished so as to have a flush lock which includes filling and finishing the tapered and square edges of the boards with jointing compound , joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed ( For light fittings, providing opening for doors, windows, ventilators etc cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary)
-
-
-
A) M.F. Frame Work with Design Type Textured Gypboard Tiles 9.5 mm thick
107.82
-
-
Applying primary coat over new steel and other metal surfaces upto 100 mm in width or grith after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wood scrappers and sand paper.
81.62
-
-
a) With ready mixed red lead red oxide primer
-
-
-
Painting two coats ( excluding priming coat ) on new steel and other metal surfaces with enamel paint of approved brand and manufacture( Asian paint/Berger paint/ICI paint/ J &Npaint/Nerolac to give an even shade including cleaning the surface of all dirt, dust and other foreign matter .
-
-
-
(I) Surfaces over 100 mm in width or girth
81.62
-
-
b) High gloss ( Asian paint/ Berger paint/ ICI paint / J& N paint / Nerolac)
-
-
-
Applying priming coat over new wood based surfaces over 10 cm in width/grith after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting.
-
-
-
a) With ready mixed paint, wood primer ( white).
12.6
-
-
Painting two coats ( excluding priming coat ) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of ditrt, dust and other foreign material , sand papering and stopping
-
-
-
(I) Surfaces over 100 mm in width or girth
-
-
-
b) High gloss (Asian Paint/ Berger Paint /ICI paint/Nerolac
12.6
-
-
Providing two coats of acrylic water based wall putty/ wall filter of Asian Paints/ Berger/Dulux (ICI)/ Nerolac over concrete/cement plaster/ brick walls ( internal )and after removing all the loosely adhering material from the wall/ceiling surface with the help of emerey stone ,putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.
361.47
-
-
Applying one coat of distemper primer of approved brand and manufacture on wall surfaces after thoroughly brushing the surface free from mortar drops and other foreign matter and including preparing the surface even and sand papered smooth.
361.47
-
-
Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.
-
-
-
(a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)
361.47
-
-
Providing one coat of cement primer( on ext. wall) of approved brand and manufacture on new surfaces after thoroughly brooming the surface preparing the surface even and sand papered smooth.
101.37
-
-
Finishing old /new wall with water proofing weather coat smooth anti-fungal premium textured exterior finish , finish of Sandex Matt brand of Snowcem India Ltd. Of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels ( two coats)
101.37
-
-
HARDWARE FITTINGS
-
-
-
Supplying, fitting and fixing anodised alluminium fittings of approved make reasonably smooth, free from sharp edges, flows and necessary aluminium screws etc. complete ( annodised to a bright natural mat or stain finish ).
-
-
-
a) Sliding door bolts
-
-
-
I) 300 X 16 mm
3
-
-
b) Tower bolt
-
-
-
I) 300 X 12 mm
6
-
-
ii) 150 X 10 mm
6
-
-
c) Door handle
-
-
-
I) 150 mm
3
-
-
ii) 100 mm
3
-
-
e) Butt hinge v) 100 mm x75mmx 4mm
6
-
-
SNITARY WORKS
-
-
-
Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified.
-
-
-
a) In exposed surfaces or in trenches.
-
-
-
(ii) 110mm dia
94
-
-
b) Concealed by chiselling or breaking brick wall/ C.C./ R.C.C and making good to the damages.
-
-
-
(ii) 110mm dia
2
-
-
Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.
-
-
-
a) In exposed surfaces or in trenches
-
-
-
ii) 110 mm dia.
10
-
-
Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.
-
-
-
a) In exposed surfaces or in trenches
-
-
-
ii) 110 mm dia.
10
-
-
Supplying fiting and fixing PVC plain single tee of (Supreme /Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.
-
-
-
a) In exposed surfaces or in trenches
-
-
-
ii) 110 mm dia.
10
-
-
Providing fitting and fixing 100 mm dia PVC Cowel with ISI make complete as directed and specified.
2
-
-
INTERNAL ELETRIFICATION WORK
-
-
-
Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete
-
-
-
b)Medium point upto 6.00mtr length
45
-
-
c)Long point upto 10.00mtr length
35
-
-
Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.
-
-
-
b)Medium point upto 6.00mtr length
20
-
-
Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt./ Havells make), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.)
-
-
-
Extra long point up to 25.00 metre. Length.
5
-
-
Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.
-
-
-
With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
59
-
-
With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
50
-
-
With 2 x 16 sq. mm. + earth continuity with 1x10 sq. mm. cable in 32 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
35
-
-
Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
12 way SPN double door
2
-
-
Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
6 way TPN (4+18) double door
2
-
-
Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
B Series
(Schneider MG, legrand, Hager make)
-
-
-
6 to 32A
10
-
-
Supplying with fitting and fixing SPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
B Series
(Schneider MG, legrand, Hager make)
-
-
-
63A
3
-
-
MCCB with Thermal & Magnetic Release
-
-
-
Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt.
-
-
-
25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make)
-
-
-
16A
2
-
-
63A
1
-
-
Supplying including fitting and fixing of high speed AC Ceiling fan complete with all accessories like , down rod, canopy etc.of following sweeps with making necessary connection etc.as reqd complete and directed by the deptt.(Without regulator)
-
-
-
a) 1400mm sweep
20
-
-
Installation ,testing and commissioning of ceiling fan including the regulator, down rod of standard size(up to 300mm length) and connection etc complete as specified and directed by the department.
20
-
-
Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as ballast, starter etc. directly on wall / ceiling including connection as approved by the Deptt.)with 1.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed by the department.
-
-
-
Striplite luminaries complete with VPIT copper ballast/ Electronic ballast and decorative end cap and 1 X 36 / 40 watt Fluorescent tube.(Crompton Greaves make) Model- DSG1114LDB CROMGOLD / DSG1114LDBN CROM GOLD NEW / DSG1314EB CG GOLD / DSG 1414EB PLANET GOLD with Super Saver / Super Brite Lamp. Or equivalent (Equivalent will be selected by the deptt considering the mother items rate) PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make.
32
-
-
Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) .
-
-
-
185.00 Sq.mm 4 Core U.G. cable in 80 mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)
12
-
-
Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .
1
-
-
Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.
1
-
-
Supplying & laying of 8 SWG Copper. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.
3
-
-
Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.
3
-
-
Supplying & laying of 25x4 mm size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.
3
-
-
Supply, fitting & fixing of Lighting Finial Arrestor made of 25 mm dia 300 mm long solid Copper tube having 85 mm dia. single prong at top and 3 mm thick base plate at bottom complete with fitting & fixing with Brass nuts & bolts on roof, RCC slab, top of column etc. as specified and directed by the deptt.
1
-
-
Supply, fitting & fixing 20 mmx5 mm G.I. strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of G.I. Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode G.I. strips and Lightning Arrestor etc. as specified and directed by the deptt.
6
-
-
Supplying and installation and commissioning of vermin and dust proof totally enclosed double door cubical type compartmental floor mounting panel board of size 1.20 m ×1.00 m ×0.50 m made of 16 SWG1.66mm) thick CR sheet and 35 mm × 35 mm × 6 mm size angle and 35 mm ×6 mm flat iron having 4 nos legs at the bottom and G.I. Sheet reefing on the top complete painting with 2 coats of red oxide metal primer and 2 coats of enameled paint. The panel board is to be erected in 1:3:6 RCC pole foundation including excavation of trench and brick soling etc. complete neatly internal wiring done as specified and directed by the department comprising of the following electrical items.
-
-
-
1. 40 Amp 4 pole 415 Volt 50 Hz MCCB as incomer - 1 no
-
-
-
2. 32 Amp 2 pole open execution with HBC fuse SDFU unit as outgoing - 3 nos.
-
-
-
3. 25 mm × 5 mm size 4 strip copper Bus-Bar- 1 set
-
-
-
4. 40 Amp 4 pole ON-OFF poser contactor - 1 No.
-
-
-
5. Surface mounting timer switch - 1 No.
-
-
-
6. 63 Amp bakelite HBC fuse kit-kat - 3 Nos
-
-
-
7. 0-40 Amp electro-mechanical counter display 3 Phase 4 wire electronic hybrid energy meter
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements