Tezpur University Tender

Providing fitting and fixing of wall fix glass shelf of 12 mm clear glass(float) Saint Gobain alongwith fitting and fixing of cast iron F- Braket 6 inch with ss screws etc. complete

providing, fitting and fixing Gypsum Ceiling Cornice Size 400 mm dia

Providing, fitting and fixing Godress Cylindrical Lock

Providing fitting and fixing C.P Towel rod 24" AQN-CHR-7711

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing fitting and fixing C.P Bib cock COP-CHR-037PM

Providing fitting and fixing C.P Towel ring Diamond-741820

Providing fitting and fixing C.P soap Dish Diamond D503

Providing fitting and fixing C.P Shower arm SHA-CHR-477

Providing fitting and fixing Concealed Cistern with control plate Jaquar make JCS-WHT-2400FS-SPS with JCP-CHR-325415-CONTROL PLATE

Providing and fixing wall hanging Commode Jaquar make etc. complete APS WHT 39953BIUFSM

Providing fitting and fixing overhead shower of 300x300 mm OHS-CHR-1639

Providing fitting and fixing overhead shower of 150x150 mm OHS-CHR-1605

Providing fitting and fixing C.P Twin Bib cock Jaquar make FUS-CHR-29041

Providing fitting and fixing C.P Angle Stop cock Jaquar make FUS-CHR-29053

Providing fitting and fixing Hand wash Bottle Dispenser with Stand Jaquar make CAN-CHR-1135N

Providing fitting and fixing of Curtain Bracket SN152