Tata Memorial Centre Tender
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Tata Memorial Centre Tender
Civil And Construction
Building Construction
Eprocure
Opening Date8 Oct 2024
Closing Date28 Oct 2024
Tender Amount₹ 2,57,52,000
Costs
EMD
₹ 5,15,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_TMC_829695_1Tender No
Construction of 20-bedded HDUTender Authority
Tata Memorial Centre ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
All kinds of soil.
7.26
-
-
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
3.63
-
-
CEMENT CONCRETE (CAST IN SITU
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:3:6 (1 Cement : 3 coarse sand (zone-III) deliverd from natural sources: 6 graded stone aggregate 20 mm nominal size deliverd from natural sources)
0.46
-
-
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering,
shuttering and finishing
-
-
-
1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
52.72
-
-
FLOOR FILLING
-
-
-
Supplying and stacking at site.
-
-
-
Over burnt (Jhama) brick aggregate 90 mm to 45 mm
24.11
-
-
REINFORCED CEMENT CONCRETE
-
-
-
Providing and laying in position specified grade of reinforced cement
concrete, excluding the cost of centering, shuttering, finishing and
reinforcement - All work up to plinth level :
-
-
-
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III)deliverd from natural sources: 3 graded stone
aggregate 20 mm nominal size deliverd from natural sources)
3.49
-
-
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
-
-
-
1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
3.96
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies,shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).
4.75
-
-
FORM WORK.
-
-
-
Centering and shuttering including strutting, propping etc. and removal
of form for :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete.
17.01
-
-
Suspended floors, roofs, landings, balconies and access platform.
38.59
-
-
Lintels,beams, plinth beams, girders,bressumers and cantilevers.
14.44
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts.
140.48
-
-
STEEL REINFORCEMENT
-
-
-
Steel reinforcement for R.C.C. work including straightening, cutting,
bending, placing in position and binding all complete upto plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
488.08
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more
1748.47
-
-
BRICK WORK
-
-
-
HALF BRICK MASONRY
-
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level up to floor V level in
all shapes and sizes in :
-
-
-
Cement mortar 1:4 (1 cement : 4 coarse sand)
4.88
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks
of class designation 7.5 in superstructure above plinth level up to floorV level.
-
-
-
Cement mortar 1:3 (1 cement :3 coarse sand
68.2
-
-
AAC BLOCK
-
-
-
Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry 100 mm/ 125 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S.
bars at every third course of masonry work.
48.57
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
-
-
-
Granite stone slab colour black, Cherry/Ruby red
-
-
-
Area of slab upto 0.50 sqm
11.31
-
-
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
-
-
-
Granite work
25.62
-
-
Extra for fixing marble /granite stone, over and above corresponding
basic item, in facia and drops of width upto 150 mm with epoxy resin
based adhesive, including cleaning etc. complete.
25.62
-
-
Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
11.31
-
-
UPVC DOOR & WINDOW
-
-
-
Casement door double panel with French (False) Mullion
with zinc alloy (zamak) 3D hinges, multi-point locking system
with cylinder, zinc alloy (Zamak) powder coated handles on
both sides.
-
-
-
Using R4 series with frame (64 mm & above)
x (55 mm & above) & sash (64 mm & above)
x (100 mm & above) & French (False) mullion
(64 mm & above) x (60 mm & above). (Height
above 2.5 metre).
9.92
-
-
SLIDING WINDOWS
-
-
-
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and
uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white
powder coated) touch locks with hook, zinc alloy body with single nylon
-
-
-
rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
-
-
-
Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
-
-
-
Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)
27.88
-
-
GLASS PANES
-
-
-
Providing and fixing panelling or panelling and glazing in panelled or
panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :
-
-
-
Float glass panes
-
-
-
5.0 mm thick glass panes (weight not less than 12.5 kg per sqm)
37.8
-
-
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
-
-
-
Fixed to openings /wooden frames with rawl plugs screws
etc.
418.16
-
-
STEEL WORK
-
-
-
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
4110.05
-
-
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.
5
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
19223.64
-
-
TILES WORK
-
-
-
VITRIFIED FLOOR TILES
-
-
-
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
-
-
-
Size of Tile 600 x 600 mm
75.29
-
-
Size of Tile 600 x 1200 mm
249.7
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be
specified by manufacturer), with water absorption less than 0.08 % and
conforming to 1.S. 15622, of approved make, in all colours & shade, in
skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1
cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm
including grouting the joint with white cement & matching pigments etc.
complete.
-
-
-
Size of Tile 500 x 500 mm
219.18
-
-
CERAMIC FLOOR TILES
-
-
-
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS
: 15622 (thickness to be specified by the manufacturer) of approved make
in all colours, shades except burgundy, bottle green, black of any size as
approved by Engineer-in-Charge in skirting, risers of steps and dados
over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand)
and jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with pigment of matching shade complete.
64.47
-
-
WALL TILES FOR TOILET
-
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to
IS: 15622 (thickness to be specified by the manufacturer), of approved
make, in all colours, shades except burgundy, bottle green, black of
any size as approved by Engineer-in-Charge, in skirting, risers of steps
and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3
coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,
including pointing in white cement mixed with pigment of matching shade
complete.
130.74
-
-
ROOFING & ROOF TREATMENT
-
-
-
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
636.77
-
-
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
-
-
-
Ridges plain (500 - 600mm)
63.5
-
-
Gutter (600 mm over all girth)
90.5
-
-
FALSE CEILING
-
-
-
Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the
perimeter of the room with help of nylon sleeves and wooden screws
at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6
-
-
-
mm, rawl plugs of size 38x12 mm
and C carrier suspension clip and main carrier bracket at 1000 mm
c/c. Inverted triangle shaped Spring Tee having height of 24 mm and
width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the
main C carrier and in direction perpendicular to it at 600 mm centers
with help of suspension brackets. Wherever the main C carrier and
spring T have to join, C carrier and spring T connectors have to be
used. All sections to be galvanized @ 120 gms/sqm (both side
inclusive), fixing with clip in tiles into spring T with :
-
-
-
GI Metal Ceiling Clip in plain Beveled edge global white
color tiles of size 600x600 and 0.5 mm thick with 25
mm height, made of G I sheet having galvanizing of 100
gms/ sqm (both sides inclusive) and electro statically
polyester powder coated of thickness 60 microns
(minimum), including factory painted after bending.
388.69
-
-
Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183,density 48 kg/ m°, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24
gauge wire mesh, for top most ceiling of building.
636.77
-
-
FINISHING
-
-
-
12 mm cement plaster of mix :
-
-
-
(1 cement: 4 fine sand)
247.49
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix :
-
-
-
(1 cement: 4 fine sand)
222.52
-
-
Neat cement punning.
39
-
-
PAINTING WORKS
-
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
1179.98
-
-
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
-
-
-
Water thinnable cement primer
1179.98
-
-
Providing and applying two coats of High Albedo paint having minimum
Solar Reflective Index (SRI) 108 (with solar reflectance & thermal
emittance tested as per ASTMC 1549 and ASTMC 1371 respectively),
VOC less than 10 cc/gm. The coating thickness and the methodology of
application shall be strctly as per manufacturer’s specifications and as
approved by Engineer-in-Charge. Surface preparation includes cleaning
with metal wire brush to remove all dust, fungus etc., washing with water
all complete. The contractor shall give guarantee for the perfomance of
SRI and also the durabitity of coating, all complete as per direction of
Engineer-in-Charge.
559.6
-
-
RAIN WATER PIPE
-
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water
pipes conforming to IS : 13592 Type A, including jointing with seal
ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
(i) Single socketed pipes.
-
-
-
110 mm diameter
36
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/
accessories for unplasticised Rigid PVC rain water pipes conforming
to IS : 13592 Type A, including jointing with seal ring conforming to
IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
Coupler.
-
-
-
12.42.1.1 = 75 mm
8
-
-
12.42.1.2 = 110 mm
8
-
-
Single pushfit Couple
-
-
-
12.42.2.1 = 75 mm
8
-
-
12.42.2.2 = 110 mm
8
-
-
Single tee with door
-
-
-
12.42.3.1 = 75x75x75 mm
8
-
-
12.42.3.2 = 10x110x110 mm
8
-
-
Single tee without door
-
-
-
12.42.4.1 = 75x75x75 mm
8
-
-
12.42.4.2 = 10x110x110 mm
8
-
-
Bend 87.5°
-
-
-
12.42.5.1 = 75 mm bend
8
-
-
12.42.5.2 = 110 mm bend
8
-
-
Providing and fixing unplasticised -PVC pipe clips of approved design
to unplasticised - PVC rain water pipes by means of 50x50x50 mm
hard wood plugs, screwed with M.S. screws of required length,
including cutting brick work and fixing in cement mortar 1:4 (1 cement
: 4 coarse sand) and making good the wall etc. complete.
-
-
-
75 mm
8
-
-
110 mm
8
-
-
Providing and fixing to the inlet mouth of rain water pipe PTMT (an
Engineering Thermoplastic) grating square (Slit) 150 mm square
with a height of 8 mm and weighing not less than 100 gms.
8
-
-
ALUMINIUM WORK
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators
and partitions with extruded built up standard tubular sections/
appropriate Z sections and other sections of approved make
conforming to IS: 733 and IS: 1285, fixing with dash fasteners of
required dia and size, including necessary filling up the gaps at
junctions, i.e. at top, bottom and sides with required EPDM rubber/
neoprene gasket etc. Aluminium sections shall be smooth, rust free,
straight, mitred and jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing / paneling, C.P.
brass / stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge. (Glazing, paneling
and dash fasteners to be paid for separately) :
-
-
-
For fixed portion
-
-
-
Powder coated aluminium (minimum
thickness of powder coating 50 micron)
62.37
-
-
For shutters of doors, windows & ventilators including
providing and fixing hinges/ pivots and making provision
for fixing of fittings wherever required including the cost
of EPDM rubber / neoprene gasket required (Fittings
shall be paid for separately
-
-
-
Powder coated aluminium (minimum
thickness of powder coating 50 micron)
52.92
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge.
-
-
-
Pre-laminated particle board with decorative lamination on both sides.
6.62
-
-
DISMANTLING WORK
-
-
-
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
38.08
-
-
Dismantling old plaster or skirting raking out joints and cleaning the
surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
10.16
-
-
Demolishing brick work manually/ by mechanical means including
stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
In cement mortar
2.15
-
-
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
10
-
-
Of area 3 sq. metres and below
-
-
-
Dismantling steel work in single sections including dismembering
and stacking within 50 metres lead in:
-
-
-
R.S. Joists
825
-
-
Channels, angles, tees and flats
550
-
-
Filling the gap in between aluminium/ stone/ wood frame and adjacent
RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing
weather/structural non sag elastomeric PU sealant over backer rod
of approved quality as per architectural drawings and direction of
Engineer-in-charge complete, complying to ASTM C920, DIN 18540- F & ISO 11600
31
-
-
Upto 20 mm depth and 20 mm width
-
-
-
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:
-
-
-
after surface preparation, first layer of slurry of cement @
0.488 kg/sqm mixed with water proofing cement compound
@ 0.253 kg/sqm.
-
-
-
laying second layer of Fibre glass cloth when the first layer is
still green. Overlaps of joints of fibre cloth should not be less
than 10 cm.
-
-
-
third layer of 1.5 mm thickness consisting of slurry of cement
@ 1.289 kg/sqm mixed with water proofing cement compound
@ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will
be allowed to air cure for 4 hours followed by water curing for
48 hours. The entire treatment will be taken upto 30 cm on
parapet wall and tucked into groove in parapet all around.
-
-
-
fourth and final layer of brick tiling with cement mortar (which
will be paid for separately.
-
-
-
For the purpose of measurement the entire treated surface will be
measured.
69.76
-
-
Providing and laying water proofing treatment to vertical and
horizontal surfaces of depressed portions of W.C., kitchen and the
like consisting of:
-
-
-
Ist course of applying cement slurry @ 4.4 kg/sqm mixed
with water proofing compound conforming to IS 2645 in
recommended proportions including rounding off junction of
vertical and horizontal surface.
-
-
-
IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse
sand) mixed with water proofing compound in recommended
proportion including rounding off junction of vertical and
horizontal surface.
-
-
-
IIIrd course of applying blown or residual bitumen applied hot
at 1.7 kg. per sqm of area.
-
-
-
IVth course of 400 micron thick PVC sheet. (Overlaps at joints
of PVC sheet should be 100 mm wide and pasted to each
other with bitumen @ 1.7 kg/sqm).
15.47
-
-
Providing & Applying polymer modified, flexible cementatious negative
side waterproofing coating with elastic waterproofing polymers on interior
wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self
priming of cementatious waterproofing polymer(dilution with water in the
ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution
with water in the ratio of 3:1 ) after scrapping and properly cleaning the
surface to remove pre-existing paint film & loose particles till plaster is
visible, complete in all respect as per the direction of Engineer-in-Charge.
130.74
-
-
Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge.
-
-
-
Upto and including 12mm dia.
100
-
-
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.
-
-
-
SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer
20
-
-
DOOR FRAME
-
-
-
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension
Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with
-
-
-
full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).
-
-
-
Frame size 65 x 150 mm
16.87
-
-
CABINATE WORK FOR NURSES STATION
-
-
-
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/ kitchen cabinet etc. of required sizes comprising of virgin polymer of K
value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum
-
-
-
and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately)
-
-
-
18 MM Thick
14.96
-
-
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),
-
-
-
minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/ mmz2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In- Charge. (Note: stainless steel screws shall be paid separately)
-
-
-
12 MM Thick
16.98
-
-
Providing Architectural Consultancy Services, design, drawing and staturory clarence in the name of dept/ extra
1
-
-
FLUSH DOOR SHUTTER
-
-
-
Providing , fitting flush door shutters made of 35 mm Block Board Shutter & finished with Decorative Laminate Sheet fitted with all fitting hinge,handle,Mortise Lock etc. including 100X8 mm wide beading on one side of wall along door frame with WPC doard finished with Decorative Laminate Sheet fitted with all fittings complete in all respect as specified and directed by the Department.
18.85
-
-
CLEAN ROOM DOORS
-
-
-
Metaflex make Double Leaf PPGL (Pre- Painted Galvanized Steel) Skin Insulated Clean Room Door with 44 mm Door thickness with PPGL Skin on both sides with pressure injected High Grade PIR as Door Blade core material with Ano alu Door Frame, Rubber Gasket Non Particle Shredding Type Seal, Drop Seal, Double Insulated Glass Vison panel 300x300mm on active leaf, Ball Bearing Hinges, Door Closer on active leaf, Door Lock and SS 304 Door Handle D-Type for smooth passage.(Unequal leaf) Size : 1500×2100 mm
2
-
-
Metaflex make Single Leaf PPGL (Pre- Painted Galvanized Steel) Skin Insulated Clean Room Door with 44 mm Door thickness with PPGL Skin on both sides with pressure injected High Grade PIR as Door Blade core material with Ano alu Door Frame, Rubber Gasket Non Particle Shredding Type Seal, Drop Seal, Double Insulated Glass Vison panel 300x300mm, Ball Bearing Hinges, Door Closer on active leaf, Door Lock and SS 304 Door Handle D-Type for smooth passage. Size : 1170×2100 mm
2
-
-
CEMENT FIBER BOARD PARTITION
-
-
-
75 MM THICK PARTITION WITH ROCKWOOL INSULATION
-
-
-
Providing and fixing of 75mm drywall partition using 12mm thick non asbestos, non combustible, SHERA fibre cemet boards made by autoclaved technology of recycled fibres and cement as raw materials. The boards as per (IS 14862) are having density of 1300kg/m3 as per (ASTMC 1185) and ISO 8336 part E for confirming durability properties and BS476 - part 5, 6 &7, Thermal conductivity to be minimum 0.15W/mK and pH value should be in the range of 7 -8. . The GI frame of thickness 0.60 consists of stud of size 48mm having one flange of 34mm and other of 36mm placed @ every 600 mm c/c in vertical direction upto soffit and horizontally at board joints. Horizontal supports to be given at every 1200mm c/c. These studs are placed at floor and ceiling channels of 50mm width and 0.60 mm thick and having equal flanges of 32 mm. The floor and ceiling channels are fixed to
-
-
-
floor and soffit using fastners at every 900mm c/c. Next one layer of 8mm thick SHERA fibre cement board are fixed in staggered joints on either side of the studs to avoid leakage through joints. These boards are joined using “type S” Self tapping SHERA W25 screws of 3.5 x 25mm corrosion resistant drywall steel screws spaced at 200mm centers on all joints and 300mm centers in the field of boards. Screw fixing is done mechanically. Finally, boards and screw heads ( covered with epoxy putty) are to be jointed and finished so as to have a flush look which includes filling tapered edge and square edges of board with Boss PU 25 sealants covered with a mesh tape. For all outer edges also to be filled up with BOSS PU sealant for sealing the edges. A layer of rockwool pads is inserted of 50mm thick and density of 70kg/m3 ( min) for the sound and thermal insulation.
34.27
-
-
150 MM THICK PARTITION WITH ROCKWOOL INSULATION
-
-
-
Providing and fixing of 150 mm drywall partition using 12mm thick non asbestos, non combustible, SHERA fibre cemet boards made by autoclaved technology of recycled fibres and cement as raw materials. The boards as per (IS 14862) are having density of 1300kg/m3 as per (ASTMC 1185) and ISO 8336 part E for confirming durability properties and BS476 - part 5, 6 &7, Thermal conductivity to be minimum 0.15W/mK and pH value should be in the range of 7 -8. . The GI frame of thickness 0.60 consists of stud of size 48mm having one flange of 34mm and other of 36mm placed @ every 600 mm c/c in vertical direction upto soffit and horizontally at board joints. Horizontal supports to be given at every 1200mm c/c. These studs are placed at floor and ceiling channels of 50mm width and 0.60 mm thick and having equal flanges of 32 mm. The floor and ceiling channels are fixed to
-
-
-
floor and soffit using fastners at every 900mm c/c. Next one layer of 8mm thick SHERA fibre cement board are fixed in staggered joints on either side of the studs to avoid leakage through joints. These boards are joined using “type S” Self tapping SHERA W25 screws of 3.5 x 25mm corrosion resistant drywall steel screws spaced at 200mm centers on all joints and 300mm centers in the field of boards. Screw fixing is done mechanically. Finally, boards and screw heads ( covered with epoxy putty) are to be jointed and finished so as to have a flush look which includes filling tapered edge and square edges of board with Boss PU 25 sealants covered with a mesh tape. For all outer edges also to be filled up with BOSS PU sealant for sealing the edges. A layer of rockwool pads is inserted of 50mm thick and density of 70kg/m3 ( min) for the sound and thermal insulation.
193.11
-
-
75 MM THICK WALL PANELING WITH ROCKWOOL INSULATION
-
-
-
Providing and fixing of 75 mm drywall paneling on existing brick/aac block wall using 12mm thick non asbestos, non combustible, SHERA fibre cemet boards made by autoclaved technology of recycled fibres and cement as raw materials. The boards as per (IS 14862) are having density of 1300kg/m3 as per (ASTMC 1185) and ISO 8336 part E for confirming durability properties and BS476 - part 5, 6 &7, Thermal conductivity to be minimum 0.15W/mK and pH value should be in the range of 7 -8. . The GI frame of thickness 0.60 consists of stud of size 48mm having one flange of 34mm and other of 36mm placed @ every 600 mm c/c in vertical direction upto soffit and horizontally at board joints. Horizontal supports to be given at every 1200mm c/c. These studs are placed at floor and ceiling channels of 50mm width and 0.60 mm thick and having equal flanges of 32 mm. The floor and ceiling channels are fixed to
-
-
-
floor and soffit using fastners at every 900mm c/c. Next one layer of 8mm thick SHERA fibre cement board are fixed in staggered joints on either side of the studs to avoid leakage through joints. These boards are joined using “type S” Self tapping SHERA W25 screws of 3.5 x 25mm corrosion resistant drywall steel screws spaced at 200mm centers on all joints and 300mm centers in the field of boards. Screw fixing is done mechanically. Finally, boards and screw heads ( covered with epoxy putty) are to be jointed and finished so as to have a flush look which includes filling tapered edge and square edges of board with Boss PU 25 sealants covered with a mesh tape. For all outer edges also to be filled up with BOSS PU sealant for sealing the edges. A layer of rockwool pads is inserted of 50mm thick and density of 70kg/m3 ( min) for the sound and thermal insulation.
186.18
-
-
CABINATE FITTINGS
-
-
-
Supply & installation of Soft closing stainless steel hinges on cabinate shutter as per direction of Architect & Department.
30
-
-
Supply & installation of Stainless steel screws 50 mm on cabinate shutter & panels as per direction of Architect & Department.
200
-
-
HILTI ANCHOR INSTALLATION WITH CHEMICAL
-
-
-
Supplying, Drilling/Cleaning hole and fixing ETA approved Hilti HAS-U threaded rod with HIT-RE 500 V4 injection mortar with 261 mm embedment h_ef, M16, Steel galvanized, Hammer drilled
installation per instruction for use, with annular gaps filled with Hilti Filling set or any suitable gap solutions. Anchor plate, steel: E 165 (Fe 290); E = 200,000.00 N/mm2; fyk = 165.00 N/mm2 Anchor type and diameter: HIT-RE 500 V4 + HIT-V (5.8) M16, Hole diameter in the fixture: df = 18.0 mm , Maximum installation torque: 80 Nm, Drilling method: Hammer drilled Minimum thickness of the base material: 297.0 mm Cleaning: Compressed air cleaning of the drilled hole according to instructions for use is required.The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate diameter and embedment of Anchor to be decided as per PROFIS Engineering Software & the report to be submitted to the project manager/ design engineer for approval.
124
-
-
ANTI BACTERIAL INTERIOR WALL PAINT
-
-
-
Finishing walls with indoor Anti-Bacterial paint with properties : a. Drying time: Surface dry time 30 minutes, b. Recoatability: 4 – 6 hours @ ambient condition (25ºC/65% RH), c. Sheen at 60ºGH: 8 – 10 units , d. VOC (ASTM D 3960): 50 gm/lit
e. Meets Green assure requirements, f. Flash point: Not applicable, g. Stability of Thinned Paint: Use within 24 hours. Make : Asia paints Royale Health Shield Emulsion Paint.
855.33
-
-
EXTERIOR WALL PAINTING
-
-
-
Finishing walls with Burger DampShield Elasto fibre reinforced liquid applied waterproofing membrane impregnated with synthetic fibre.
-
-
-
New work (Two or more coats )
456
-
-
COUNTERTOP SURFACE
-
-
-
Finishing Nurses station counter top marino Hanex 6mm S008 N white solid surface over 18 mm WPC board as per direction of Architect.
7.13
-
-
ZEBRA BLIND
-
-
-
Supplying, fitting and fixing of Zebra Blinds ultra spring system of reputed make and shade design as approved by the Department.
26.46
-
-
CHARCOAL LOUVERS PANELLING
-
-
-
Providing, fitting and fixing Charcoal composit Louvers Wall Panells.These Wall Panels are erected / installed using the 6 mm thick BWR grade Ply Board backing fixed to wall,column etc. and finally Charcoal composit Louvers Wall Panells by proper anchoring.The work to be complete in all respect as specified and directed by the Architect & Department.
38.67
-
-
Plumbing works
-
-
-
SANITARY INSTALLATIONS
-
-
-
Providing and fixing white vitreous china extended wall mounting
water closet of size 780x370x690 mm of approved shape including
providing & fixing white vitreous china cistern with dual flush fitting,
of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres),
including seat cover, and cistern fittings, nuts, bolts and gasket etc
complete.
4
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock.
6
-
-
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
4
-
-
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
6
-
-
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
-
-
-
Rectangular shape 1500x450 mm
6
-
-
Providing and fixing toilet paper holder :
-
-
-
C.P. Brass
4
-
-
WATER SUPPLY
-
-
-
CPVC PIPES
-
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings
with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
Internal work - Exposed on wall
-
-
-
15 mm nominal outer dia Pipes
5
-
-
25 mm nominal outer dia Pipes
15
-
-
50 mm nominal outer dia Pipes
20
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
Concealed work, including cutting chases and making good the walls
etc.
-
-
-
15 mm nominal outer dia Pipes
15
-
-
25 mm nominal outer dia Pipes
35
-
-
32 mm nominal outer dia Pipes
50
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of
joints complete as per direction of Engineer in Charge.
-
-
-
External work
-
-
-
15 mm nominal outer dia Pipes
10
-
-
25 mm nominal outer dia Pipes
50
-
-
50 mm nominal outer dia Pipes
150
-
-
C.P. BRASS FITTINGS
-
-
-
Providing and fixing C.P. brass long nose bib cock of approved quality
conforming to IS standards and weighing not less than 810 gms.
-
-
-
15 mm nominal bore
6
-
-
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
-
-
-
15 mm nominal bore
6
-
-
Providing and fixing gun metal gate vlve with C.L wheel of approved quality (Screwed end)
-
-
-
25 mm nominal bore
15
-
-
50 mm nominal bore
6
-
-
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.
-
-
-
15 mm nominal bore with 45 cm length
6
-
-
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.
-
-
-
25mm nominal bore, weighing not less than 62 gms
2
-
-
WATER TANK
-
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
4000
-
-
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal
dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
-
-
-
Inside dimensions 455x610 mm and 45 cm deep for single pipe line :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
-
-
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per
standard design.
1
-
-
PVC PIPES, BENDS, JUNCTIONS, TEES ETC.
-
-
-
Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified.
-
-
-
a) In exposed surfaces or in trenches.
-
-
-
(i) 110mm dia.
120
-
-
(iv) 75mm dia.
100
-
-
b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.
-
-
-
(i) 110mm dia.
30
-
-
(iv) 75mm dia.
30
-
-
Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.
-
-
-
a) In exposed surfaces or in trenches.
-
-
-
(i) 110mm dia.
6
-
-
(iv) 75 mm dia.
6
-
-
(b) Concealed by chiselling or breaking brick wall/C.C/R.C.C. and making good to the damages.
-
-
-
(i) 110mm dia.
6
-
-
(iv) 75 mm dia.
6
-
-
Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L. as directed and specified.
-
-
-
a) In exposed surfaces or in trenches.
-
-
-
(ii) 110mm dia.
6
-
-
(iv) 75 mm dia.
6
-
-
(b) Concealed by chiselling or breaking brick wall/C.C/R.C.C. and making good to the damages.
-
-
-
(i) 110mm dia.
2
-
-
(iv) 75 mm dia.
2
-
-
Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.
-
-
-
a) In exposed surfaces or in trenches.
-
-
-
(ii) 110mm dia.
5
-
-
(iv) 75 mm dia.
5
-
-
(b) Concealed by chiselling or breaking brick wall/C.C/R.C.C. and making good to the damages.
-
-
-
(ii) 110mm dia.
6
-
-
(iv) 75 mm dia.
6
-
-
Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.
-
-
-
a) In exposed surfaces or in trenches.
-
-
-
(ii) 110mm dia.
4
-
-
(iv) 75 mm dia.
4
-
-
(b) Concealed by chiselling or breaking brick wall/C.C/R.C.C. and making good to the damages.
-
-
-
(ii) 110mm dia.
6
-
-
(iv) 75 mm dia.
6
-
-
Supplying fiting and fixing PVC single ‘Y’ of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.
-
-
-
a) In exposed surfaces or in trenches.
3
-
-
(ii) 110mm dia.
3
-
-
(ii) 75mm dia.
-
-
-
(b) Concealed by chiselling or breaking brick wall/C.C/R.C.C. and making good to the damages.
-
-
-
(ii) 110mm dia.
6
-
-
(ii) 75 mm dia.
6
-
-
Supplying fiting and fixing PVC coupler of (Supreme / Prince)or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.
-
-
-
a) In exposed surfaces or in trenches.
-
-
-
(ii) 110mm dia.
15
-
-
(ii) 75mm dia.
15
-
-
(b) Concealed by chiselling or breaking brick wall/C.C/R.C.C. and making good to the damages.
-
-
-
(ii) 110mm dia.
10
-
-
(ii) 75 mm dia.
10
-
-
Supplying fiting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.
-
-
-
a) In exposed surfaces or in trenches.
-
-
-
(iv) 110 mm x 75mm
5
-
-
(b) Concealed by chiselling or breaking brick wall/C.C/R.C.C. and making good to the damages.
-
-
-
(ii) 110 mm x 75mm
5
-
-
Supplying fiting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.
-
-
-
a) In exposed surfaces or in trenches.
-
-
-
(iv) 110 mm x 75mm
6
-
-
(b) Concealed by chiselling or breaking brick wall/C.C/R.C.C. and making good to the damages.
-
-
-
(ii) 110 mm x 75mm
6
-
-
Supplying fiting and fixing PVC socket plug (End Cap) of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. in exposed surface or trences as necessary complete at all levels including below G.L. as directed and specified.
-
-
-
(a) 110 mm
5
-
-
(b) 75 mm
35
-
-
Relocation of Existing Water Tanks,GI,CPVC pipes etc.
1
-
-
Providing and fixing C.P. brass Elbow Action Pillar Cock Faucet confirming to IS standards..
-
-
-
15 mm nominal bore
2
-
-
Providing, fitting and fixing of Stainless Steel Floor Grating 150mm
6
-
-
Providing, fitting and fixing concealed diverter body delux complete as directed and specified.(a) Parrywear (i) G5051A1 Single Lever
Concealed Diverter Body - Deluxe ` 2,850
2
-
-
Providing, fitting and fixing Single Flow Overhead Shower with Arm & Wall Flange complete as directed and specified.(a) Parrywear (i) T9927A1 Single Flow Overhead Shower with Arm & Wall Flange
2
-
-
Providing, fitting and fixing of Soap Dish complete as directed and specified.(a) Parrywear (i) T6003A1 Soap Dish
6
-
-
Providing, fitting and fixing of Towel Ring complete as directed and specified.(a) Parrywear (i) T6002A1 Towel Ring
12
-
-
Electrical works
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group C
65
-
-
Wiring for light power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
40
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface recessed steel conduit as required.
-
-
-
2 X 2.5 sq. mm +1 X 2.5 sq. mm earth wire
100
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface recessed medium class PVC conduit as required.
-
-
-
2 X 2.5 sq. mm +1 X 2.5 sq. mm earth wire
700
-
-
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
30
-
-
2 X 10 sq. mm +1 X 6 sq. mm earth wire
60
-
-
2 X 16 sq. mm +1 X 6 sq. mm earth wire
30
-
-
Supplying and fixing following modular switch socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
5/6 A switch
10
-
-
3 pin 5/6 A socket outlet
20
-
-
Supplying and fixing following size modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
1 or 2 Module (75mmX75mm)
10
-
-
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
-
-
-
1 or 2 Module
10
-
-
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
2
-
-
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
12
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
10
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
2
-
-
Supplying and fixing 6 module GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required.
7
-
-
Supplying and fixing 9 module GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 nos. 6 pin 5/6 & 15/16 A modular socket outlet and 3 nos. 15/16 A modular switch, connections etc. as required.
22
-
-
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
2
-
-
Installation, testing and commissioning of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
Upto 450 mm sweep
4
-
-
Wiring for group controlled (looped) light point/fan point/exhaust fan point call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group C
35
-
-
MAIN PANEL
-
-
-
Supplying, installation, testing and commissioning of metal enclosed wall/floor mounted front operated cubical type switch gear panel, suitable for indoor installation conforming to IS: 8623 (Part I & II), fabricated out of 2mm thick CRCA sheet having gasketed hinged door on each cubicle. The panel shall be completely dust tight and vermin proof and shall be painted with anti corrosive and anti condensation type fully powder coated / enamel painted after seven tank treatment. The panel should have provision of entry of cable at the bottom and also provision of out going feeders from the bottom of the panel. The panel shall be incorporated with horizontal and vertical sleeved high quality electrolytic Aluminium busbars with uniform cross section complete with all internal wiring, PVC insulated and PVC sheathed 1100 volt grade, danger board, two earthing lugs, cable chamber as required housing below mentioned switchgears / meters, indicating lamps, connected as per drawing and shall be flush mounted on the front of the panel.
1
-
-
Incomer
-
-
-
200A 4P 30 KA thermal magnetic release MCCB with spreader links and rotary handles model DU250C Cat No. CM90634OOPO of make L&T or equivalent – 2 Nos.
-
-
-
200A 4P Auto Transfer Switch Make L&T or equivalent with spreader links and rotary handles – 1 No.
-
-
-
Bus Bar
-
-
-
400 Amp, TPN Busbar (60mm x 5mm) with Electrolytic Aluminium of Uniform Cross-Section – 1 Set
-
-
-
LED Indicating Lamp Red, Yellow, Blue – 6 sets.
-
-
-
2A 3P MCB – 6 Nos.
-
-
-
Outgoing
-
-
-
100A 4P 25 KA thermal magnetic release MCCB with spreader links and rotary handles model DU100D Cat No. CM90518OOKO of make L&T or equivalent – 2 Nos.
-
-
-
40A 4P 18 KA thermal magnetic release MCCB with spreader links and rotary handles model DU100D Cat No. CM90518OOGO of make L&T or equivalent – 2 Nos.
-
-
-
63A 4P 18 KA thermal magnetic release MCCB with spreader links and rotary handles model DU100D Cat No. CM90518OOHO of make L&T or equivalent – 1 No.
-
-
-
40A 4P MCB act No. BB40400C of make L&T or equivalent – 4 Nos.
-
-
-
63A 4P MCB act No. BB40630C of make L&T or equivalent – 1 No.
-
-
-
UPS INPUT DB
-
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surfacel recess, complete wHh finned copper bus ban neuualbus ban eanh ban am ban interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolatorl
-
-
-
12way, Double Door
1
-
-
63A DP 10 KA MCB 'C' Curve make L&T Cat no. BB40630C or equivalent
1
-
-
40A SP 10 KA MCB 'C' Curve make L&T Cat no. BB10400C or equivalent
6
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
2
-
-
LIGHT DB-1 (UPS) & LIGHT DB-2 (RAW)
-
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surfacel recess, complete wHh finned copper bus ban neuualbus ban eanh ban am ban interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator)
-
-
-
16 way, Double door
2
-
-
40A DP 10 KA MCB 'C' Curve make L&T Cat no. BB20400C or equivalent
1
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
24
-
-
Double pole
1
-
-
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40A
2
-
-
DB-POWER 1, 2, 3 & 4 (UPS)
-
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surfacel recess, complete wHh finned copper bus ban neuualbus ban eanh ban am ban interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolatorl
-
-
-
12way, Double Door
4
-
-
40A DP 10 KA MCB 'C' Curve make L&T Cat no. BB20400C or equivalent
4
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
32
-
-
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40A
4
-
-
AC DB (for Indoor Units)
-
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/isolator)
-
-
-
6 way (4 + 18), Double door
1
-
-
63A 4P 10 KA MCB 'C' Curve make L&T Cat no. BB40630C or equivalent
1
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
18
-
-
CABLES
-
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.
-
-
-
Above 35 sq. mm and upto 95 sq. mm
450
-
-
Supply of PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade as per IS 7098(Part 1) 1988 of following size.
-
-
-
3½ core 70 sqmm Armoured Al. Cable
300
-
-
3½ core 50 sqmm Un. Armoured Al. Cable
50
-
-
4 core 16 sqmm Un. Armoured Al. Cable
50
-
-
4 core 10 sqmm Un. Armoured Al. Cable
50
-
-
EARTHING
-
-
-
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal coke and salt as required.
4
-
-
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.l. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
40
-
-
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.
80
-
-
20 KVA MODULAR TYPE ONLINE UPS
-
-
-
Supply installation testing and commissioning of 20KVA 3Ph- In / 1Ph-Out Double Conversion True Online UPS Systems Make/Model:-VERTIV/ITA2 20KVA On line UPS of make VERTIV or equivalent with 20Nos.12V-18ah, Exide SMF Batteries 30Mins Back Up, Battery Iron Rack, Interlink Cables & Lugs etc. as required complete.
1
-
-
FIXTURES
-
-
-
Supply, Installation, Testing and commissioning of Recessed mounted bottom opening LED Cleanroom luminaire (2X2) with CRCA powder coated housing of make Crompton model CLEANLUX I Cat No. LCBOR-40-CDL or equivalent with all accessories, drivers etc. as required complete. [CLR]
32
-
-
Supply, Installation, Testing and commissioning of LED Recess mounted 2x2 Ft (100 lm/W) full lit luminaire with glare free uniform illumination with longer life and less maintenance of make Crompton model POLARIS NIO I-II Cat No. LCTLRNE-30-FO-CDL or equivalent with all accessories, drivers etc. as required complete. [CLT]
6
-
-
Supply, Installation, Testing and commissioning of LED Recess mounted circular downlighter Slim design LED recessed round polycarbonate housing down lighter with superior light output and integral driver, Efficacy 100lm/w of make Crompton model QUARTZ+ R Cat No. LCDEP-15-CDL or equivalent with all accessories, drivers etc. as required complete. [DL]
46
-
-
Supply, Installation, Testing and commissioning of robust and high performance LED luminaire with extruded channel in thermally conductive material, high translucent serrated milky white diffuser for glare free and smooth light distribution. Efficacy: 100 lm/W of make Crompton model TRIMLINE NEU Cat No.CCS-103-05-65-SL-DP-NWH or equivalent with all accessories, drivers etc. as required complete. [ML]
2
-
-
Supply of 1400mm sweep BLDC Ceiling Fans with connection of make Orient Model SUMMERKING or equivalent with all accessories.. [CF]
10
-
-
Supply of 300mm sweep Exhaust Fans [EF] with connection from existing 6A socket outlet (rate for socket and connection to the socket to be taken separately)
4
-
-
HVAC Works
-
-
-
Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be
suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 .
Make: Daikin/Toshiba/Trane
36
-
-
SITC of VRF Indoor Unit
-
-
-
Supply, installation, testing and commissioning of following minimum capacity 4- way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.
Make: Daikin/Toshiba/Trane
-
-
-
1.0 TR
3
-
-
3.2TR
1
-
-
Refrigerant Pipe
-
-
-
Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :
-
-
-
12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
3
-
-
15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
5
-
-
19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
6
-
-
22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
6
-
-
25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
10
-
-
28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
3
-
-
31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation
5
-
-
34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation
10
-
-
38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation
6
-
-
41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation
6
-
-
Refnet
-
-
-
Indoor Refnet / Branch Joint
3
-
-
Supply of Air Handling Unit ( IDU)
-
-
-
Supply of Floor Mounted AHU of 0.6 mm GI Double Skinned DX AHU with Al anodized thermal break frame structure injected with minimum 32 mm thick 40 kg/m3 PUF insulation; GI Panel shall be powder coated from both iner and outer side , the AHU shall comprising of: Mixing box / Anodized Aluminum Aerofoil Low leakage Fresh / Balancing / Exhaust Air Damper / Pre-Filter section with EU- 4 compliant Prefilters for Return and Fresh Air / Al finned 8 Row deep -13 FPI double skin sandwitch insulated removable SS 304 condensate drain pan / Fine filter EU 7 / fine filter section with EU 9 compliant / Fan section with Hi static best efficiency Plug Fan driven by suitable pole Eff-1 TEFC Motor with Drive Package / Al aerofoil SA damper/Fire Retardant Canvass connection/Unit mounted on cushy foot Vibration isolators. AHU shall be Eurovent certified.
Makes: Stulz/ Trane/ System Air/Flakt wood/Euroclima
-
-
-
4000 CFM / 125 mm WC ESP / 10 TR / 8 Row Deep Coil / with pre filter & fine filter / Floor Mounted mounted AHU / 32mm Double Skin AHU.
2
-
-
Expension Kit/ AHU KIT
-
-
-
Supply of Expansion Kit, Communication PCB & Thermostat
Supply of Electronic Type Expansion Kit, Communication PCB with Sensors, Corded Self Diagnostic Type Digital Thermostat, Controller, control box with internal wiring, AHU kit for each DX Type Units and other related accessories etc with connectivity to automation system for A/M status, RUN status & Remote start / stop command (Bacnet/IP).
For 4000 CFM /10TR
2
-
-
Installation of Refnet
-
-
-
Indoor Refnet / Branch Joint
3
-
-
Installation, Testing & Commissioning of of Air Handling Unit ( IDU)
-
-
-
Floor Mounted AHU of 0.6 mm GI Double Skinned DX AHU with Al anodized thermal break frame structure injected with minimum 32 mm thick 40 kg/m3 PUF insulation; GI Panel shall be powder coated from both iner and outer side , the AHU shall comprising of: Mixing box / Anodized Aluminum Aerofoil Low leakage Fresh / Balancing / Exhaust Air Damper / Pre-Filter section with EU- 4 compliant Prefilters for Return and Fresh Air / Al finned 8 Row deep -13 FPI double skin sandwitch insulated removable SS 304 condensate drain pan / Fine filter EU 7 / fine filter section with EU 9 compliant / Fan section with Hi static best efficiency Plug Fan driven by suitable pole Eff-1 TEFC Motor with Drive Package / Al aerofoil SA damper / Fire Retardant Canvass connection/Unit mounted on cushy foot Vibration isolators.
-
-
-
4000 CFM / 125 mm WC ESP / 10 TR / 8 Row Deep Coil / with pre filter & fine filter / Floor mounted AHU / 32mm Double Skin AHU.
2
-
-
Installation Testing & Commissioning of AHU kit
-
-
-
20 HP
2
-
-
Supply & Installation of Ultra Voilet Germicidal Irradiation
-
-
-
UVGI (Ultra Voilet Germicidal Irradiation) System in Supply Duct
Supply, installation, testing & commissioning of Duct mounted, factory assembled, UVGI system of minimum 90% kill rate with intensity of 3,000 mW-Sec/cm² per pass of air borne viruses, Covid - 19 virus, mold, spores, bacteria & odour etc. complete with all electrical components such as Ballasts, Disconnect Switch, Fuse, Hour Meter etc. in Electrical Box, UL Listed cable between Electrical Box and UVGI frame, Guide Rails and Installation Rails, Cover Plates & all necessary hardware required for installation. The complete package shall be sourced from UVGI manufacturer. The selection of UVGI shall be based on above parameters, tender specification & suitable for duct air quantity as given below:-
For 4000 CFM
2
-
-
Refrigerant R-410a for Top up in VRF system
65
-
-
Drain Piping
-
-
-
HDPE Drain piping 32 mm with insulation
30
-
-
SITC OF DUCT WORK : AIR-DISTRIBUTION
-
-
-
Supply and installation of Aluminum , site fabricated rectangular ducts, complete with Silicon Sealant joints with necessary supports using thread roads and anchor bolts.
-
-
-
22 SWG
435
-
-
ACCOUSTIC INSULATION
-
-
-
SITC of Open cell nitril rubber with 15mm thick
110
-
-
THERMAL INSULATIONS OF THE DUCT WITH 19 MM NITRIL RUBBER
Make: Aeroflex / Armacell / K – Flex
-
-
-
19 MM thick nitril rubber Aluminium foil faced
340
-
-
AIR TERMINATION SYSTEM
-
-
-
Supply & Fixing of Al extruded powder coated Return Air Grill / Diffuser without Volume Control damper & necessary supporting arrangment
9
-
-
Supply & Fixing of Al extruded powder coated Return Air Grill / Diffuser without Volume Control damper & necessary supporting arrangment
8
-
-
SITC OF STRIP HEATER
-
-
-
Strip Heater duct mounted for AHUs with necessary control device Termostat, Hundistat and Airstat for controlling RH Capacity: 2 KW
2
-
-
AHU STARTER PANEL
-
-
-
PDB Panel for AHU motor with interlocking arrangement with Strip heater
2
-
-
Supply of EU 13 HEPA Filters of 99.997% Efficiency down to 0.3 Micron particle size
-
-
-
For 4000CFM AHU, Filter - 99.997 % Eff. . Dn to 0.3 Mic Hepa Filter
8
-
-
Control Cables
-
-
-
Communication Cable 2C x .75 sqmm Sheilded copper cable in pvc conduit
35
-
-
Lifting Shifting of Equipment from Ground floor to first floor
1
-
-
Fire fighting works
-
-
-
Providing ,laying testing & commissioning of 'C' class heavy duty MS Pipe conforming tp IS3589/IS 1239 including welding,fittings like elbow,tees,flange,tapers,nuts bolts,gaskets etc.ans fixing the pipe on the wall /ceiling with suitable clamps/support frame and painting with two two or more coats of systhetic enamel paints of required ahade complete as required :
-
-
-
25mm dia
50
-
-
32mm dia
40
-
-
40mm dia
30
-
-
50mm dia
75
-
-
65mm dia
10
-
-
80mm dia
30
-
-
100mm dia
30
-
-
150mm dia
25
-
-
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal coupling of 63mm dia with cast iron wheel ISI marked conforming to IS 5290(Type-A)with blank Gunmetal cap and chain required
-
-
-
single headed Gunmetal
1
-
-
Providing ,laying testing & commissioning of butterfly valve of PN 1.6 rating with gunmatal seat duly ISI mark complete with nuts,bolts,wshers,gaskets conforming to IS 13095 of following sizes as required
-
-
-
65mm dia
1
-
-
80mm dia
2
-
-
150mm dia
1
-
-
Supplying and fixing orifice plate made out of 6mm thick stainless steel(Grade 304)with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required
1
-
-
Providing ,laying testing & commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket ,GI bolts,nuts,washers etc.as required
-
-
-
65mm dia
1
-
-
80mm dia
2
-
-
150mm dia
1
-
-
Supplying and fixing 63 mm 15mm long RRL hose pipe with 63mm dia male and female couplings duly bound with GI wire ,rivets etc.conforming to IS 636(ype -A) as required
-
-
-
Gun metal
1
-
-
Supplying and fixing first-aid hose reel MS construction spray painting in post office red,conforming t0 is 884 complete with the ollowing as required
-
-
-
30m
1
-
-
Supplying and fixing air vessel made of 250 mm dia ,8mm thick MS sheet,1200mm in height with air release valve ontop and flanged connection to riser,drain arrangement with 25 mm dia gun metalm wheel valve with required accessories,pressure gauge and painting with synthetic enamel paint of approved shade as required
1
-
-
providing ,fixing ,testing& commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories
25
-
-
Providing and fixing of pressure switch with MS pipe line including connection etc as required
1
-
-
Providing and fixing of flow switch in following Size MS pipe including connection etc. as required
-
-
-
150mm dia
1
-
-
Providing ,fixing.testing & commissioning of installation control valve of cast iron body,brass/bronze working parts comprising of water motor alarm,bronze seat clapper arm and hydrulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates,pressure gauges,emergency realease,strainer switch box,cock valve complete with drain valve and bypass.test control box ball valves.MS pipe of required,flange,orifice plate,gasket etc of following size as required
-
-
-
80mm dia
1
-
-
Supplying ,installation ,testing & commissioning of sprinkler flexible pipe(UL Listed)of stainless steel complete with 15NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI(Burst)with branch line(inlet)25mm NPT male thread to sprinkler head(outlet)15mm NPT female thread with reducer,nipple,2side bracket,stockbar of following sizes complete as required
-
-
-
700mm
3
-
-
1000mm
10
-
-
1200mm
12
-
-
Fire alarm system
-
-
-
Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required.
1
-
-
Supplying, installation, testing & commissioning of fault isolator complete with base as required.
1
-
-
Supplying, installation, testing & commissioning of addressable fire control module complete as required.
1
-
-
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
1
-
-
17.5 CABLING & WIRING
-
-
-
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
300
-
-
MGPS works
-
-
-
Supply, Installation, Testing & Commissioning of AMIGO TYPE Terminal Units (Oxygen/VAC Gas Outlets) with probes/ Adaptors as per CE certified/ ISO certified Organization.
60
-
-
Supply, Installation, Testing & Commissioning of Oxygen Flow meter, made with chrome plated brass body. Graduated flow tube and cover made of polycarbonate unbreakable. Adjustable flow by needle valve knowb with micrometrical regulation. Humidifier bottle is made of unbreakable polycarbonate material and is autoclavable.
20
-
-
Supply, Installation, Testing & Commissioning of Low Pressure Tubing Flexible having antistatic Core as per ISO standards with proper colour coded for O2, N2O, Compressed Air and Vacuum complete all as specified and directed. 5mtr long
30
-
-
O2 Ventilator Probe
20
-
-
Supply, Installation, Testing & Commissioning of Ward Vacuum Unit with Regulator alongwith vacuum gauge, collection jar of 600ml capacity reusable plastic collection bottle with overflow safety tap wall mounted type with bracket complete all as specified and as directed.
20
-
-
Supply, Installation, Testing & Commissioning of horizontal Bed Head pannel 5ft long CE Marked,Excluded pannel, powder coated along with accessories like III hook (O2-2 nos; VAC-1 no) utility BP Basket, Monitor Tray, Aluminium clamp for ward vaccum unit , LED Examination light, and anti bacterial switch & socket 3 Nos.
20
-
-
Copper Pipes Solid drawn, seamless, de-oxidized, non-arsenical, half-hard, tempered and de-greased copper pipe conforming to latest BS EN 13348 :2001 and manufactured as per BS : 2871, 1971 Part I, Table X (or as per EN1057). All copper pipes will be de-greased & delivered capped at both ends. The pipes will be accompanied with manufacturers LLOYD test certificate
-
-
-
i) 12mm OD x 0.7mm Thick
50
-
-
ii) 15mm OD x 0.9mm Thick
80
-
-
iii) 22mm OD x 0.9mm Thick
100
-
-
iv) 28mm OD x 0.9mm Thick
140
-
-
Supply, Installation, Testing & Commissioning of Zonal Valve Box, are fully designed to suit multiple operational and requirement and ensure considering space for mounting.
The configurations are Valve Boxes are described.:-
-
-
-
i) Gas Services- O2, Vacuum,
2
-
-
Supply, Installation, Testing & Commissioning of Area Line Pressure Alarm with displays for various faults indications and capable of monitoring maximum 2medical gas service by means of pressure switches etc with audible warning with automatic reedit when the gas service returns to normal as per standard specifications all as specified and as directed for the following Area Line Pressure Alarm:-
-
-
-
ii) Gas Line Pressure Alarm
1
-
-
Supply, Installation, Testing & Commissioning of Isolation Valves with brass body with nickel plate valves operating handle suitable for 15mm OD copper pipe to 76 mm OD copper pipes with brass adapter as per standard specifications all as specified and as directed for the following Isolation Valves:-
-
-
-
12mm OD
2
-
-
15mm OD
4
-
-
22mm OD
4
-
-
28mm OD
4
-
-
CCTV works
-
-
-
SITC of fixed dome indoor Colour Varifocal Lens Camera having (2MP IP DOME 30 MTR CPPLUS UNC
DA21PL2 GP)0.20 lux level requirement in night mode with the following components / sub assemblies as per specifications, complete with power supply unit, necessary brackets for fixing in the false ceiling etc. as required.(The camera shall be UL/ EN/ FCC certified) a. 1/3" progressive scan CCD image sensor Day/Night camera with inbuilt DSP, advanced features like High resolution of minimum 640 x 480, AGC, BLC, extended sensitivity, support on screen display etc.
b. 1/3" Image format varifocal lens ( 4 to 8 mm)
6
-
-
SITC of Advanced dynamic 36 channel digital event recording system with Digital multiplexer, DVR, Video Motion Detection & Video management System features suitable for CCTV cameras and as specified in the technical specifications inclusive of the rack cost and inclusive of 6 Tb Consistent storage Memory or more with one month memory store .POE SWITCH 16 port Giga,6 u rack and Rack 4 U
1
-
-
SITC of CAT6 wire 100 mtr Secure eye
100
-
-
SITC of PVC conduites for cat 6 cable
100
-
-
SITC of cam power supply
1
-
-
Supply, installation, testing & commissioning of 32" Flat LED Color Monitors
1
-
-
Supply, installation, RJ45 Connector (1Box)
1
-
-
Install. Test. & Com. of CCTV System
1
-
-
LAN & VOICE
-
-
-
Supply, Installation Testing And Commissioning Of Unshielded Twisted Pair CAT-6 cable laid through round PVC conduits
110
-
-
Supply, Installation Testing And Commissioning Of CAT-6 RJ-45 information outlets
10
-
-
Supply, Installation Testing And Commissioning Of Dual Port Face Plates
10
-
-
Supply, Installation Testing And Commissioning Of 1 mtr Cat-6 UTP patch cord
6
-
-
Supply, Installation Testing And Commissioning Of 2 mtr Cat-6 UTP patch cord
4
-
-
Supply, Installation Testing And Commissioning Of CAT-6 RJ-45 loaded 24 port patch panel
1
-
-
Supply, Installation Testing And Commissioning Of 24 port 10/100/1000 mbps Gigabit unmanaged Layer-2 switch
1
-
-
Supply, Installation Testing And Commissioning Of 12 U wall mounted equipment rack
1
-
-
Supply, Installation Testing And Commissioning Of 2PSTN 16 extension IP type hybrid rack mounted EPABX including connecting wire etc all complete of approved Make As Approved By The Deptt.
1
-
-
Supply, Installation Testing And Commissioning Of Entry Level IP phone with POE Model : SPARSH
VP110 or equivalent
2
-
-
PA System
-
-
-
Supplying installation, testing, programming and commissioning of Audio equipment, 4 Channel Power Amplifier, 240 W per channel @ 8 ohms of make : Bosch/Crown or equivalent make as Approved By The Deptt.
1
-
-
Supplying installation, testing, programming and commissioning of Audio equipment,microphone - 30/ 50 cm microphone without base of make hypercardiod/ Cardioids gooseneck or equivalent make as Approved By The Deptt.
1
-
-
Supplying installation, testing, programming and commissioning of Audio equipment, Compact PA Wall Speaker 6 Watts of make Bosch/Ahuja/JBL or equivalent make as Approved By The Deptt.
5
-
-
Supplying installation, testing, programming and commissioning of copper flat twin core audio wire as Approved By The Deptt.
25
-
-
Nursing call bell system
-
-
-
Supply, Installation, Testing & Commissioning of Medisystems "CE Certified & NABH Approved" Nurse Call System
-
-
-
16-Line, Central Display Unit
1
-
-
Standard Bed Unit
20
-
-
Standard Handset
10
-
-
Toilet Pull Cord Unit
2
-
-
Emergency Alert, Reset Unit
1
-
-
Door Display Unit
1
-
-
Cat 6 Cabling in PVC Conduit
150
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%