Public Works Roads Department Tender
... More
The PWRD has issued a formal invitation for competitive bids for the Public Works Roads Department project, for Sopd_g_25_26_08 Improvement Of Mancota Road From Ch. 1837.00 M To Ch.4000.00 M In View Of Event Of G-20 Summit At Dibrugarh Under Sopd-g Emergent Nature For The Year 2024-25 in Dibrugarh, Assam, with an estimated contract value of Rs. 7,01,60,000. The bid opening date for this tender is 29-05-2025 and the last date for bid submission is 04-06-2025. Interested bidders for Public Works Roads Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
AI Insights
Technical
Technical
Additional Eligibility
Technical Capacity
... View More
The bidder is required to have prior work experience in civil engineering construction works. The required experience includes a minimum annual financial turnover, completion of similar nature of work as a prime contractor, and quantities of work executed as a prime contractor in the last five years. The minimum annual financial turnover required is 60% of the DNIT value up to Rs. 200 Lakh and 75% of the DNIT value for more than Rs. 200 Lakh, in any one year. The bidder should have also satisfactorily completed, as a prime contractor, at least one similar work of value not less than 1/3 (one third) of the DNIT value, with a completion percentage of not less than 90%. The value and percentage of similar works completed are: - 1/3 (one third) of the DNIT value, which translates to approximately 33.33% of the contract value.
- 25% of the DNIT in any one year, with a weightage of 10% per year for completed works in previous years.
- The contract value for similar nature of work completed as a prime contractor. Additionally, the bidder should have executed in any one year, the minimum quantities of the major items of work, usually not less than 40% of the estimated quantity. The bidder should also provide details of works underway or contractually committed, and clients who may be contacted for further information on those contracts. The bidder should have experience in works of a similar nature and size for each of the last five years, and provide a total monetary value of civil construction work performed for each of the last five years. The bidder should also provide a certificate of executed quantities of work done in any one year of the last 5 (five) years, issued by the authorized Engineer in-charge. The bidder should have an undertaking for investment of minimum cash up to 25% of the value of the work during implementation of the contract, and provide evidence of access to or availability of credit facilities (minimum 10% of notified contract value) certified by the bankers. For unemployed Graduate/Diploma Engineers, the relaxation in qualification criteria includes a minimum annual financial turnover of 25% of the DNIT in any one year, with a weightage of 10% per year for completed works in previous years, and exemption from single similar nature of work performed as a prime contractor.
Costs
EMD
₹ 14,03,000Document Cost
₹ 14,030Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWD_44627_1Tender No
CE/DEV/TB/23/2025-26/01 Dtd- 15.05.2025Tender Authority
Public Works Roads Department ViewPurchaser Address
-Website
http://https://pwdroads.assam.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Maintenance of Earthen shoulder (filling with fresh selected soil)
Making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000 m as per technical specification Clause 1903
3600
83
-
... More
Maintenance of Earhen shoulder (stripping of excess soil)Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per drawings and Technical Specification Clause 1903
10250
18
-
... More
Sand Filling in Foundation Trenches as per Drawing & Technical Specification
7394
1511
-
... More
Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m, Excavation for roadway in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3.
19934
67
-
... More
Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting pg to meet requirement of cum Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (1) from private land.
240
254
-
... More
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with allifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1, (a) from private land.
107.25
339
-
... More
Granular Sub-base with Well Graded Material (Table 400.1), (A) By Mix in Place Method, Construction of granular sub base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place mithod with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. ii) For Grading II Material
3727.89
2884
-
... More
Wet Mix Macadam, Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, baricacing and maintenance of diversion, etc. as per Tables 400.11 & 400.12 and Technical Specification Clause 406. By Mechanical Means with 1 km lead
2448.36
3687
-
... More
Prime Coat
i) Low porosity
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502
12423.13
39
-
... More
Tack Coat
ii) Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
35492
11
-
... More
Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix and filler transporting the hot miox to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no. 507. complete in all respect. (including carriage of mixed materials up to 10.0 Km initial lead from mixing plant )( Including cost of testing of materials at site and laboratory as directed by the deptt.)
I With hydrated lime/ cement as filler (refer table 500-9 of MoSRT&H specification)
A With 60/70 or VG-30 grade bitumen (ii) for Grading II (19 mm nominal size)
915.42
9583
-
... More
Bituminous Concrete: Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.509. complete in all respect. (including carriage of mixed materials up to 10.0 Km initial lead from mixing plant )( Including cost of testing of materials at site and laboratory as directed by the deptt.)
I With hydrated lime/cement as filler ( refer table 500-9 of MoSRT&H
specification)
A With 60/70 or VG-30 grade bitumen
(ii) for Grading II (13 mm nominal size)
946.04
11055
-
... More
Inter locking concrete Block pavement, (A) Interlocking pavement block, (i) Providing and laying interlocking concrete block pavement with M40 grade grade of concrete blocks having thickness 80mm as per technical specification clause 1504 complete including carriage. (b) Excluding Edge block/ Edge restraints
10525.5
941
-
... More
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 202 ans 1204. A. With Crushed Stone, (II) P.C.C. grade M 20, i) Nominal mix (1:2:4). Parapat Wall on Retaining Wall
218.74
7048
-
... More
Direction and Place Identification signs with size more than 0.9 sam size board. A. Retro-reflectorised Traffic Signs, (1) Provid and erecting direction and place identification retro-reflectorised sign as per RC:67 made of enciosulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 2 mm thick with area exceeding 0.90 sun supported on mild steel angle iron posts 5 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 4:0 mm x 450 mm x 600 mm, 600 mm below ground level as per approved crawing and Technical Specification Clause 1701
4.32
14373
-
... More
1000mm dia HP Culvert Earth work in excavation of foundation for structure as per drawing and technical specification Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and deleterious material and disposal upto a lead of 50m. dressing of sides and bottom and backfilling in trenches with excavated suitable material. 1. Ordinary soil (i) Upto 3 m depth
98.04
127
-
... More
Bedding for Pipe
Laying 1st class bedding on well compacted sand, moorum as per clause 115
(ii) Granular bedding
10.35
1558
-
... More
PCC 1:3:6 in Foundation
Plain reinforced concrete M10 (1:3:6 nominal mix) in levelling course below open foundation of Head walls as per drawing & Technical Specification Clause 1109.
5.43
6036
-
... More
Brick Masonary work
Brick masonary work in cement morter in foundation of Head Wall excluding pointing and plastering as per drawing and technical specifications clause 1109.
I)Brick masonary in 1:3 Cement mortar
50.28
7450
-
... More
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row Including hxing collar with cement mortai 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. B) 1000mm dia
22.5
7787
-
... More
Plstering
Plastering with cement mortar ( 1:4 ) 15mm thick on brick work in substructure as per technical specification Rate.
82.86
146
-
... More
RCC Cover Drain Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal
of stumps and other deleterious material and disposal upto a lead of 50 m,dressing of sides and bottom and backfilling in trenches with excavated suitable
material.
I Ordinary soil
Upto 3 m depth
376
127
-
... More
complete as per drawings and technical specifications Clause 802, 803,1202 & 1203
I P.C.C grade M 10
Nominal mix 1:3:6
21
6036
-
... More
Supplying, fitting and placing TMT (Fe-500 D) reinforcement bar (Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX or equivalent)) in
substructrue complete as per drawings and technical specification Clauses
1002, 1005, 1010 & 1202
13.78
53724
-
... More
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204
Nominal mix 1:3:6
141
7048
-
... More
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling,concrete and masonry works in head walls and parapets Clause 1106.
1000 mm dia
20
7787
-
... More
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling,concrete and masonry works in head walls and parapets Clause 1106.
600 mm dia
20
3272
-
... More
Providing Rounded Hump type speed breaker
60
3836
-
... More
Shifting of utility services
1
2567021
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements