Public Works Roads Department Tender

Construction of Granular Sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (ii)For Grading II Material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness,hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber,applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405.(A) By Manual Means,(II) WBM Grading 2

Providing, laying, spreading and compacting stone aggregate of specific sizes to water bound macadam specification including spreading in unirorm thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and booming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per Technical specification clause 405. (A) By Manual Means,(II) WBM Grading 3

Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix and filler transporting the hot miox to work site,laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no. 507. complete in all respect. (including carriage of mixed materials up to 10.0 Km initial lead from mixing plant )(Including cost of testing of materials at site and laboratory as directed by the deptt.)(b) With rock dust as filler (refer table 500-9 of MoSRT&H specification)(A) with 60/70 or VG-30 grade bitumen(ii) for GradingII(19 mm nominal size)

Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.509. complete in all respect. (including carriage of mixed materials up to 10.0 Km initial lead from mixing plant )(Including cost of testing of materials at site and laboratory as directed by the deptt.) B With rock dust as filler ( refer table 500-9 of MoSRT&H specification)(I) with 60/70 or VG-30 grade bitumen,(ii) for Grading-II(13 mm nominal size)

Planting of Trees: Planting of Trees and their Maintenance for three Year (Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge mannure, planting the saplings, backfilling the trenches, watering , fixing the tree guatrd and maintaining the plants for three year.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801,(i) 900mm equilateral triangle

Providing and erecting direction and place identification retro-reflectorised sign boards as per IRC-67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 2mm thick with arear exceeding 0.9 sqm suported on mild steel angle iron posts 75mm/75mm/6mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15 garde cement concrete 450mm X 450 mmX600 mm below ground level as per approved drawing and technical specification Claus 1701.

Furnishing and laying of the live sods of perennial turf forming grass on embankment sliopes, verges and other locations shown on the drawing or as directed by the engineer inluding prepartion of ground stacking the sods etc.

RCC Guard Post: Supplying, fitting and fixing RCC guard post 150cm long erected 75cm above the ground and 75cm below the ground with M-15 grade (nominal mix 1:2:4 with broken stone aggregate up to 20mm size) of cement concrete and required reinforcement tied in position with annealed black wire including centering, moulding the top, curing including painting concrete surfaces in 23cm strips upto 0.75m from the top alternately in black and white and having 2 nos. reflective band of desired shade etc. complete as per design and as directed.(b) 15 cm dia. RCC guard post with reinforcement of 4nos. 12mm dia TMT main steel bars and 6mm TMT/ MS stirrups at 15cm c/c.

Painting lines, Dashes, arrows etc,. On roads in two coats on new work with ready mixed road marking paint, conforming to IS:164 o bituminous concrete surface, including cleaning the surface of all dirt, dust and other foregn matter demarcation at site and traffic controls per drawing and technical specification clause 1702. (ii) Upto 10 cm in width

Construction of Brick Massonry Drain as rain cut protection as per analysis

Metal Beam Crash Barrier, Type - A: "W" Metal Beam Crash Barrier (Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2m center to center, 1.8 m high, 1.1m below ground/road level, all steel parts and fitments to be galvanized by hot dip process, all fitting to conform to IS:1367 and IS:1364, metal beam rail to be fixedon the vertical post with a spacer of channel section 150mm x 75mm x 5mm, 330mm long complete as per clause 810.)

Providing and fixing metal road stud with dimensions 100x50x20mm Length anchoring shank:60.4 mm Aluminum body with,(b) Two- way reflective with 2x43 glass elements.