Public Works Roads Department Tender

Furnishing and laying of the live sods of perennial turf forming grass on embankment slope, verges or other locations shown on the drawing or as directed by the Engineer including preparation of ground fetching of sods and watering as per Technical Specification Clause 309

Single bamboo palasiding /walling of whole 2nd class bamboo (Jati or Bathua) 75mm dia and closely packed & driven including fitting fixing with half bamboo kamis horizontally in three rows with cane of typing with wire complete and struts 1.5 m apart longitudinally and providing brush wood as per drawing and technical specifications Clause 1302.5

Construction of granular sub-base by providing well graded materials, spreading in uniform layers by tractor with grading attachment on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification Clause 401. ii) For Grading II materials

Providing, laying, spreading and compacting stone aggregate of specified sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheels 80-100 KN static roller in stages to proper grade and camber, applying and brooming stone screening to fill-up the interstices of coarse aggregate, watering & compacting to the required density grading III as per Technical Specification Clause 405. Hand broken matel from blasted boulder Grading –III By Mechanical Means

Providing and laying of interlocking concrete Block Pavement (ICBP) with cement concrete paving block as per IS15658–2006 of thickness 80mm and 28 days compressive strength not less than 40 n/mm2 over a layer of bedding sand complying thickness 30mm laid over prepared base complying to grading specified in table 1500.6 Block are to be laid wither structure /running /horring bone pattern of bonds as directed by the engineer and are to be laid to proper level and gradenad compacted with appropriate equipment such as plate Vibrator along with specified in table 1500-06 to fill up the gaps between blocks including construction of edges of restraint with M25 cement concrete of width of depth 230 mm each on either edges complete as for draining and technical specification clause 1504 (Inclusive of edge restraint and carriage) (a) Including Edge block/edge restraints

Providing and fixing retro –reflectorised cautionary mandatory and informatory sign as per IRC 67 made of encapsulated leans type reflective sheeting vide Clause 1701.2.3 fixed over aluminum sheeting, 1.5mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450mm x 450mm x 600mm, 600mm below ground level as per approved drawing and technical specification Clause 801 (ii) 60cm circular