Public Works Roads Department Tender

Semi - Dense Bituminous Concrete: Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect. including carriage of mixed materials up to 10.0 Km initial lead from mixing plant ) (Including cost of testing of materials at site and laboratory as directed by the deptt.) I With hydrated lime/ cement as filler (refer table 500-9 of MoSRT&H specification) A With 60/70 or VG-30 grade bitumen (ii) for Grading II (10 mm nominal size)

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications (Considering 80% length)

Road Markers/Road Stud with Lens Reflector Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.

Speed Breaker Tack Coat ii) Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix and filler transporting the hot miox to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no. 507. complete in all respect. (including carriage of mixed materials up to 10.0 Km initial lead from mixing plant )( Including cost of testing of materials at site and laboratory as directed by the deptt.) I With hydrated lime/ cement as filler (refer table 500-9 of MoSRT&H specification) A With 60/70 or VG-30 grade bitumen (ii) for Grading II (19 mm nominal size)

Bituminous Concrete: Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.509. complete in all respect. (including carriage of mixed materials up to 10.0 Km initial lead from mixing plant )( Including cost of testing of materials at site and laboratory as directed by the deptt.) I With hydrated lime/cement as filler ( refer table 500-9 of MoSRT&H specification) A With 60/70 or VG-30 grade bitumen (ii) for Grading II (13 mm nominal size)

Painting lines dashes , arrows etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS : 164n bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter demarkation at the site and traffic control as per drawing and echnical specification clause 1702

Providing and fixing of road stud 100mm x 100mm dia cast in aluminium , resistant to corrosive effect of salt and grit, fitted with lens reflectors, installed in concrete or asphaltic surface by drilling holes 30mm up to adepth of 600mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS: 873 (Part 4) 1973.

providing and fixing of rectro- reflectorised cautionery mandatory and informatory sign as per IRC 67 made of encapsulated lens type reflecting sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supproted on mild steel iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M-15 gade cement concrete 450mm x 450mm x 6mm, 600mm below the ground level as per drawing and Technical specification clause 801 (ii) 60cm equilateral triange

providing and fixing of rectro- reflectorised cautionery mandatory and informatory sign as per IRC 67 made of encapsulated lens type reflecting sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supproted on mild steel iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M-15 gade cement concrete 450mm x 450mm x 6mm, 600mm below the ground level as per drawing and Technical specification clause 801 (iii) 60cm circular

providing and fixing of rectro- reflectorised cautionery mandatory and informatory sign as per IRC 67 made of encapsulated lens type reflecting sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supproted on mild steel iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M-15 gade cement concrete 450mm x 450mm x 6mm, 600mm below the ground level as per drawing and Technical specification clause 801. (iv) 80cm x 60cm rectangular