Public Works Roads Department Tender

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (A) (II) For Grading II Materials

WMM- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406.

Inter Locking concrete Block pavement with edge block (i) Providing and laying interlocking concrete block pavement(M40) having thickness 80mm as per technical specification clause 1504(inclusive of Edge restraint and carriage)

Construction of RCC Drain = 320.00m Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. (I) Ordinary soil Upto 3 m depth

Providing concrete for Plain / reinforced concrete in open foundation complete as per drawing and technical specification Clause 802, 803, 1202 & 1203. (B) With Natural Gravel (I) PCC Grade M-10. Nominal Mix 1:3:6

SOR ( 2020-21 ) Supplying, fitting and placing TMT (Fe-500 D) reinforcement bar (From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL) in foundation complete as per drawings and technical specifications Clauses 1000 and 1202

SOR ( 2020-21 ) Supplying, fitting and placing TMT (Fe-500 D) reinforcement bar . (From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL) in Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL) in super structure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202

SOR ( 2020-21 ) Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (B) With natural Gravel (iv) R.C.C Grade M20

SOR ( 2020-21 ) Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5. (A) With crushed ston. R.C.C grade M 20. For nominal mix 1:2:4. Ht. upto 5.00m ( For Slab ).

Construction of 1000mm dia DHPC = 2 No Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. (I) Ordinary soil Upto 3 m depth

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (B) With Natural Gravel (I) PCC Grade M-10. Nominal Mix 1:3:6

(B) ii) Type B ( First Class ) Bedding Laying ( First Class) bedding on well compacted sand, moorum or approved granular materials as per Clause 1105 (ii) (ii) Granular Materials.

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 B. With Natural Gravel (II) PCC Grade. M-20 (i) Nominal Mix 1:2:4

Providing and laying reinforced cement concrete pipe NP-3 for culverts on 1st class bedding of granular materials in double row including fixing collar with cement mortar 1:2 but excluding .. Clause 1106 (b) 1000mm dia double

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (ii) 600 mm equilateral tringle

Routine Maintenance for 1st year

Routine Maintenance for 2nd year

Routine Maintenance for 3rd year

Routine Maintenance for 4th year