Public Works Roads Department Tender

Construction of granular sub-base by providing close graded materials, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per technical specification Clause 401

Providing, laying, spreading and compacting stone aggregate of specified sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fill-up the interstices of coarse aggregate, watering & compacting to the required density grading III as per Technical Specification Clause 405.

Providing and laying of interlocking concrete Block Pavement (ICBP) with cement concrete paving block as per IS15658–2006 of thickness 80mm and 28 days compressive strength not less than 40 n/mm2 over a layer of bedding sand complying thickness 30mm laid over prepared base complying to grading specified in table 1500.6 Block are to be laid wither structure /running /horring bone pattern of bonds as directed by the engineer and are to be laid to proper level and gradenad compacted with appropriate equipment such as plate Vibrator along with specified in table 1500-06 to fill up the gaps between blocks including construction of edges of restraint with M25 cement concrete of width of depth 230 mm each on either edges complete as for draining and technical specification clause 1504 (Inclusive of edge restraint and carriage) (a) Including Edge block/edge restraints

Providing reflective pavement market with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H’s fixed to the road surface using the adhesives and the procedures recommended by the manufactures with three months replacement warranty and free maintenance.

Providing “Sparkle Solar Road Studs manufactured by Tata B.P. Solar India Ltd. Of size (125mm x 125mm), 90mm height (from bottom of shank to the top of stud) with detachable battery m6 LEDs three on each side for Bi –directional studs/3LEDs on one side for unidirectional studs, ultra bright LED in amber and red colour, weight per stud 700+25gms, flash rate of 50-65 times per minute completely water resistant and weather proof with replacement warranty and free maintenance for one year from the date of installation of stud on road (installation should be made suing adhesives and procedures recommended by manufacturer under the supervision of their competent technician (a) Bi- directional Stud

Planting of trees by the road side (Avenue tree) in 0.60m dia holes, 1m deep dug in the ground, mixing the soil with decayed farm yard/studge manure, planting the saplings, backfilling the trenches, watering, fixing the tree guard and maintaing the plants for one year.

Supplying including installation and commissioning automatic on/off operation street lighting system with 350Wp (175 wpx2) solar module rating and energy efficient high power LED lamps of 80 watts with luminous flux greater that 8000 Lummens and Lumen efficiency of 100 -120 Luminarie - Luminarie with transparency lic cover, housing and high efficiency LED lamps and fitted with gasket and assessories for weather and insect proof operation battery : 12V 150ah -02 nos sealed low/negligible maintenance batteries designed for repeated cycle operation and shall be enclosed in a cabin that has pilfer proof lock & key arrangement. Pitch Circle dia 250mm bolt length 750mm, projected bolt length 125mm. Pole foundation shall be pit of 75 x 75 x 200 cm in all type of soil or rocks and filling the pit with 1:2:4 cc and muffing of the pole upto 400mm above the ground level.

Supplying, fitting and laying in loose with Geo-textile bags of Type-A (1.30x0.70 M) made of Geo textile non woven fabric sheets of 400 GSM manufactured from polyster/polypropylene conforming to relevant ISO standard filled with special sand/ silt from flood plain or adjacent char within a distance of 90m of the work site including excavation, filling Geo bags with sand weighing 126.00kg after fillin, stitchingthe mouth of the filled bags with polypropylene or polyster complete as per technical specification and as directed. (b) Without Boat

Supply, stitching and Laying of Non woven Geo textile Fabric sheet of 400 gsm

Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered/concrete surfaces as per drawing and Tecch. Specification Clause 1701

Providing and fixing retro –reflectorised cautionary mandatory and informatory sign as per IRC 67 made of encapsulated leans type reflective sheeting vide Clause 1701.2.3 fixed over aluminum sheeting, 1.5mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450mm x 450mm x 600mm, 600mm below ground level as per approved drawing and technical specification Clause 1701 (i) 60cm equilateral triangle

Routine Maintenance for 1st Year

Routine Maintenance for 2nd Year

Routine Maintenance for 3rd Year