Public Works Building And NH Department Tender
... More
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Costs
EMD
₹ 6,27,66,400Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_PWBNH_8565_1Bid Award Id
ViewTender No
CE/REC/23/2018/2_Kokrajhar Medical CollegeTender Authority
Public Works Building And NH Department ViewPurchaser Address
-Website
http://https://pwdbnh.assam.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered)
Above 1.5 m upto 3.00 m depth
19688.19
-
-
... More
Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.
With hill sand obtained by truck carriage loading and unloading, and carriage to the site of work.
24216.21
-
-
... More
With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.
23816.93
-
-
... More
Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified.
Other than Guwahati city
7679.94
-
-
... More
Surface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil.
67506.29
-
-
... More
Construction of Granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per Clause 401 of MoRTH specifications (with an initial lead of 5 km) (including cost of testing of materials at site and laboratory as directed by the deptt.) Using Grading I material
34290.71
-
-
... More
Plain Cement Work
Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).
In prop. 1:3:6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using mixture machine) for plinth proctection
431.73
-
-
... More
In prop. 1:4:8 (1 cement:4 coarse sand : 8 coarse agg. by volume (using mixture machine)
4459.12
-
-
... More
Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. 100mm thick
30410.78
-
-
... More
Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.
8174.49
-
-
... More
REINFORCED CEMENT CONCRETE WORKS
Providing and laying plain/reinforced cement croncrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) Using mixture machine In sub - structure up to plinth level
Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.
M25 grade concrete
15110.44
-
-
... More
Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.
M25 grade concrete
264.19
-
-
... More
Using Batching Plant/ RMC/ Truck mounted batching plant including Transit Mixer and Concrete Pump
Using admixture, plasticiser etc Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.
M25 grade concrete
28730.65
-
-
... More
Extra for using plasticiser in concrete if admixture,plasticiser etc are not included in the item rate
For M25 Grade concrete
44105.28
-
-
... More
Extra over item no.16&17above for each subsequent floor or part thereof above the 1st floor level.
16259.91
-
-
... More
Providing and fixing Duraboard HD-100 premoulded compressible filler board at all heights and depths of minimum density 95kg/cum, non-staining having less than 1% water absorption, compression recovery of 93% (minimum) as per manufactured specification with polysulphide sealant to seal the expansion joint including preparation of surface, Polymer Modified Mortar (PMM) (Proportion 1cement: 3 sand:1 acrylic polymer) nozing, carriage of materials, cutting and placing to the required size complete at all levels as per drawings and direction of Engineer-in-Charge.
50mm wide
3399.96
-
-
... More
Supplying fitting and fixing 200mm x 6mm thick A.C. plain sheet for vertical and horizontal expansion joints fixed to one side of column/ wall by necessary rawal plugs/ screws/ wooden plugs placed not more than 300mm c/c as directed and specified.
7362.12
-
-
... More
PLYBOARD SHUTTERING (FORMWORK):
Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:
Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.
Using 38mm thick plank
33223.36
-
-
... More
Sides of tie beams, grade beams etc. at or below ground level.
Using 38mm thick plank
400
-
-
... More
Sloping or Battering sufaces such as sloped slabs etc. including folded plates.
Where inclination to horizontal plane exceeds 30o where shuttering may be provided both on under side & upper side, if required.
Using 38mm thick plank
2774.73
-
-
... More
Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank)
2299.25
-
-
... More
Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in:
Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face
55915.59
-
-
... More
Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.
For depth not exceeding 1.0M.
50484.35
-
-
... More
Vertical surface such as walls (any thickness), parapet walls, partitions and the like including attached pilasters, butresses, plinth and string courses and the like.
6696.39
-
-
... More
Vertical ties, fins, sun breaker, louvers, bands, dropwalls etc.
3041.91
-
-
... More
Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.
Floors etc. upto 200mm in thickness.
57535.91
-
-
... More
Extra for each subsequent 1.0M height or part thereof beyound the initial height of 4.0M as mentioned in item no. 25 TO 29
20601.94
-
-
... More
MASONARY WORK:
Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.
Brick on flat soling
3738.72
-
-
... More
Filling sunken floor with broken jhama brick bats and sand including compacting and supplying of materials complete as specified and directed for all levels.
911.86
-
-
... More
Extra cost for lifting of brickbats and sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified.
911.86
-
-
... More
Brick work in cement morter with 1st class brick including racking out joints and dewatering if necessary, and curing complete as directed in sub-structure up to plinth level.
In proportion 1:4.(1 cement:4 sand)
1311.36
-
-
... More
Cellular Concrete Block work using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement morter of proportion 1: 5 including racking out joints and curing complete as directed instructure. (protruding rod is to be provided at every 3 course interval and will be measured and paid separately)
In superstructure above plinth level up to 1st floor level.
18409.04
-
-
... More
Extra over item no.35 above for CC Block work in each subsequent floor or part thereof above 1st floor level.
10453.35
-
-
... More
100mm thick wall using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement mortar of proportion 1: 5 including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding rod is to be provided at every 3 course interval and will be measured and paid separately)
24980.03
-
-
... More
Extra for CC block walling on item no 37 for each subsequent floor or part thereof above the 1st floor level.
21262.07
-
-
... More
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry (with F.P.S. bricks).
24980.03
-
-
... More
FLOORING WORK:
65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed.
1939.1
-
-
... More
Providing and laying 50mm thick C.C. floor with metallic concrete hardener topping under layer of 35 mm thick cement concrete in prop.1:2:4 (1cement : 2 coarse sand : 4 coarse aggregate of 20 mm and down) and top layer of 15mm thick of metallic cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 stone aggregate 6 mm and down) by volume with which metallic hardening compound of approved quality is mixed in the ratio of 4:1 (4 parts of cement : 1 part of metallic floor hardening compound of approved quality by weight) including finishing with curing complete as directed.
669.1
-
-
... More
Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor.
15 mm thick
285.82
-
-
... More
Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.
CERAMIC Executive range-1 (Sizes 400 mm x 400mm and above)
Somany made- VC Shield (Group- 25) (406x406) mm Deluxe -VC
4983.48
-
-
... More
Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). for toilets.
Normal range (Somany/Orient/Nitco/Asian Make)
Of sizes 300mm x 300mm and above
482.14
-
-
... More
Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).
Normal range (Somany/Orient/Nitco/Asian Make)
Of sizes 200mm x 300mm and above
17447.46
-
-
... More
Pre-cast cement concrete tiles 20 mm thick with aggregate of sizes up to 6 mm laid in floors, treads of steps and landing with 20 mm thick bed of cement mortar in prop. 1:6 (1cement : 6 coarse sand ) joined with neat cement slurry with pigment to match the shade of the tiles complete with pre-cast tiles of : Any shade or combination of shades using white cement.
2174.19
-
-
... More
Extra over item no. 46 for rubbing and polishing the cement concrete tiles in flooring, skirting, dado etc.
393.01
-
-
... More
Supplying, fitting and fixing 38mm thick (finished size) wooden flooring with sal wood plank butt jointed, fitted on sal wood joist of size 100mm x 125mm spaced not more than 900mm apart fitted with 16mm dia bolt and nuts with iron clamp of 50mm x 5mm size inserting in the cement concrete floor base (floor base to be measured and paid separately) including providing 25mm thick damp proof course with water proofing compound as recommended by the manufacturer over C.C floor base including providing kiricide oiling two coats to the timber joists, underside of the flooring planks, two coats of anti-corrosive paint to the iron works, including providing ventilation gaps for the timber works of specified size (75mm x 75mm) covered with welded mesh fabrics at the face of the gap including dressing, levelling, finishing complete as specified and directed by the department at all levels (measurement shall be taken at the finished area of the works).
105.58
-
-
... More
Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)
Normal range (Somany/Orient/Nitco/Varmora/Marbito Make)
Of sizes 600mm x 600mm and above
38803.3
-
-
... More
Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.
VITRIFIED
Somany made- Duragres (Glazed Vitrified Tiles) (605x605) mm Gress Matt
234.68
-
-
... More
Kota-stone slab flooring of 18 mm thick over 20mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
550mm x 550mm
6959.26
-
-
... More
Kota stone slab of 18 mm thick in riser of steps, skirting, dado and pillars laid with 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete.
550mm x 550mm
673.31
-
-
... More
Extra for nosing in steps of red or white, fine dressed and rubbed with sand stone.
2057.2
-
-
... More
18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slab of specified quality and shade at all levels.
Dungri slab / Baroda Green Marble
1826.29
-
-
... More
Dungri slab / Jaisalmer Yellow Marble.
114.8
-
-
... More
Dungri slab / White Marble.
213.49
-
-
... More
18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slab of specified quality and shade at all levels.
Dungri slab / Jaisalmer yellow Marble
1629.44
-
-
... More
Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). Normal Quality
With fix-A-Tile (Choksey/Sika/Pedelite/Rouf)
4873.02
-
-
... More
With White cement
1349.37
-
-
... More
Providing,fitting and fixing Laminated abrasion resistant wooden flooring from Uniproducts (India) Ltd.of thickness not less than 8.2mml laid on existing concrete floor with underlayer of approved transparent polythene and foam sheet to make the floor surface even and sound free complete as directed and specified
Laminate Floorings-A from Uniproducts(India) Ltd.
Unitex AC3 Brand
249.71
-
-
... More
Providing,fitting and fixing Carpet tiles of size 500x500mm with thickness not less than 4mm made of 100% Olefin Polypropleyne material,with dual backing; Primary backing with PVC and Secondary with Reinforced Fibre glass from Uniproducts (India) Ltd.laid on existing concrete floor complete as directed and specified
Carpet Tiles from Uniproducts(India) Ltd.
Runway Brand
2908.68
-
-
... More
Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department).
Of size300mmx600mm and above
52346.44
-
-
... More
Providing and fixing to wall to wall mirror 6 mm thick beveled edge with teakwood frame, including backing fixed with 6 mm thick BWP teak ply .all complete ground fix to rawl plug of approved design with C P brass screw and washer.
62.39
-
-
... More
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.
Granite of any colour and shade
Area of slab over 0.50 sqm
1364.3
-
-
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge.. Granite work
1283.86
-
-
... More
Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150mm with epoxy resin baesd adhesive including cleaning etc. complete.
2012.57
-
-
... More
Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/Stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edge etc. complete.
558
-
-
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
Granite Stone of approved shade
66.42
-
-
... More
Kota stone slab of 18 mm thick in riser of steps, skirting, dado and pillars laid with 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete.
550mm x 550mm
3605.94
-
-
... More
Providing polished MULTIWYN tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). (Willow, Brick, Marvel, Sigma, Enamora, Pyramid, Crocotile, Bricket, Denver)
2294.74
-
-
... More
Providing and fixing of Luxury Vinyl Floor 2.5MM as per ASTM F 386 with .50MM wear layer vinyl floorings of VIBRANT FLOORS series with dimensions of 184MM and length of 950MM or Tiles size 570MMx570MM as per company standard should be approved by architech. 2.5 mm thickness to laid on hard, levelled, smooth and moisture free sub floor. Vibrant LVT shall be installed with company recommonded bond or adhesive. Vibrant Luxury Vinyl Floor should have traffic classification 32 . Product shall be ISO approved. LVT should be floor score and T abrasion class approved. Flooring should have caster chair EN-985 tested with color fastness of more than 6. It should be ASTME662 qualified on Smoke density test. Product should be fire rating of the product should be Bfl-S1. and Wear Group of T Class. As per approved shade and colour as per the satisfaction of the Architect. Make Vibrant Floor or Upo Floor
322.88
-
-
... More
Providing and fixing Conductive Vinyl Flooring of 2mm thick homogeneous flooring with veined surface pattern and non directional chip texture as per EN649. The tile size should be 610mm x 610mm. The floor should have residual indentation of 0.03mm as per EN 433, the light fastness 6 as per ISO 105-B02 & electrical resistance should be 5x104R106Ω as per EN 1081 for EC. The product should also confirm to class Bfl- s1 in flammability test as per EN13501-1, slip resistance of R9 as per DIN51130, dynamic coefficient of friction with class DS as per EN 13893. The wear group of Sheet is M as per EN 660-2. Flooring should have excellent chemical resistance as per EN423. Make Vibrant Floor (ESD) or Upo Floor
7136.64
-
-
... More
Providing and laying of 2mm thick PVC Vinyl flooring, vinyl floor covering of size 1.5 Mtrs. or 2 Mtrs. width x 20 Mtrs. length of weight 3000 g/m2 with wear class Group T. Doesn't not act as Bacterial growth subtract. M1 class for busilding material. The product should have antistatic properties (AS Class 1) and incorporates(antibacterial and fungicidal treatment). The product should have excellent sound insulation with impact sound insulation of 2 db and excellent shock absorbent behavior. The laid flooring shall confirm the fire rating Bfl-s1 class as per EN 13501-1. The floor should have extreme durability and Phthalate free. The work shall be carried out as per manufacture specification confirms to EN Green Building Council norms. Product should be 100% recyclable. Make Upofloor or Vibrant Floor
11021.11
-
-
... More
PLASTERING WORK
10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. In cement mortar 1:4
123340.87
-
-
... More
15 mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. On rough side
In cement mortar 1:4
92837.84
-
-
... More
20 mm thick Cement plaster in two coats, backing coat 15 mm and finishing coat 5mm thick on rough side of single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. On rough side (backing coat 15 mm and finishing coat 5 mm thick)
In cement mortar 1:3
54135.35
-
-
... More
Extra over item no74 to 76 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.
30022.9
-
-
... More
Extra over item no 74 to 76 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed.
Single coat plaster
120320.62
-
-
... More
Extra over item no 74 to 76 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed.
Two coat plaster
29310.77
-
-
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
9300
-
-
... More
CEILING,LINING PARTITIONS WORK:
Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) suspended ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 298mm c/c. Then 12.5mm thick square edge Fulltone/ Sundance/ Cratone/ Louvertone/ Textured. Gypboard panels of size 595mmx595mm (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 290mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, grill diffusers etc. cut out to be made with the frame of perimeter channel supported suitably and measured and paid separately as and where necessary). (Glass wool to be measured and paid separately). M/F Frame Work with Acoustic Type Fully Perforated Gypboard (Fulltone) Tiles (NRC value 0.75 with 50mm glass wool mat backing) 12.5mm thick.
18548.08
-
-
... More
Providing and fixing, in position suspended false ceiling using E-Grid (exposed ceiling suspension 2430 system) of grid size 600mm x 600mm/1200mmx600mm with main runner 38 x 24mm, cross tee 29mm x 24mm & wall angle 24mm x 24mm . Using 4mm/6mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Board as per IS 14862, to be placed in a grid of G.I. system duly suspended with 4mm/6mm dia G.I/M.S bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinklers, smoke detectors etc. The main runners to be secured to structural soffit by hanger @ 1220mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall. Flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c, so as to form 600mm x 600mm/1200mmx600mm grid, all complete as per the drawing & directions of engineer-in-charge. Finally, if specified, boards are to be painted with 2 coats of acrylic emulsion paint of approved shade/make over a coat of cement primer before installing it on the grid. Designer Ceilings of Everest make or equivalent as directed by the departement Using 6 mm thick FC Board
6824.1
-
-
... More
Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). 12.5mm thick
5280.1
-
-
... More
Providing and fixing wood plank ceiling with tongued and grooved joint leaving a gap of 10 mm as per drawing including necessary nails & wood screws complete(Timber frame work to be measured and paid separately). Teak wood plank (20mm thick)
216.17
-
-
... More
ROOF WORK:
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
In 75x75mm deep chase
5063.56
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
333
-
-
... More
Providing single layer of bamboo mat lining over roof frame.
819.52
-
-
... More
Providing bamboo roof truss with whole ruas bam boo and kamis, ruas placed at 150 mm apart and kamis 200mm to 230mm apart including tying all members with galvd tying wire.
819.52
-
-
... More
Renewing / providing 5 layer of bamboo single roofing with matured muli bamboo tarja, woven closely round tiers of single kamis spaced 150mm apart on ground with 600mm and 900 mm single seperately. First 900mm long tiers are tied at lower ends of roof frames projected 450mm, towards the eves, 750mm tiers tied with 150mm overlap of first tiers, 3 nos 600 mm tiers tied with 150mm overlap of second tiers, 2 nos 600mm tiers tied with 150mm overlap of third tiers and forth 600mm tiers continued up to ahead of ridge, the last but one will be 750mm and the last one will be 600mm long (this section gives 5 layers) Then with 900mm wire, diagonally woven double bamboo tarja mat over the ridge complete with all tying with galvd wire as directed and specified.
443.88
-
-
... More
Providing and fixing of leak proof,fire retardant and Uv resistant skylighting galzing with Lexan polycarbonate sheet fixed with specially designed Domal management system confirming to IS:737 alloy & temper 6063 - T6 with a UTS of 180 to 200 mpa and weight of 1.03 kg/mtr. approx with EPDM rubber gasket of specific gravity as per ISO 2781,age resistant as per ASTM - D573 hardness as per 2240 & tensile strength as per ASTM 412 including the silicon sealent GE Bayer Weathersil NY as per drawing and directed by the Engineer in charge.
Polycarbonate Sheet (Multiwall) 10 mm thick
2257.7
-
-
... More
Providing Pre Painted Galvalume Sheet Roofing (PPGL) at all levels including fitting and fixing self drilling, self tapping screws complete (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/Dyna roof/Durakolar/Wonder Roof or ewuivalent as directed by the department
0.60 mm thick
29826.66
-
-
... More
Providing Pre Painted Galvalume Sheet (PPGL) accessories ( Ridges / Valley / Gutter / Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete.
TATA Blue scope/Dyna roof/Durakolar/Wonder Roof or ewuivalent as directed by the department
0.60 mm thick
8495.96
-
-
... More
BLOCK BOARD SHUTTERS
Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws.
Decorative type face panel and block board core..
35 mm thick shutters
4755.03
-
-
... More
Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. With sal wood
60.63
-
-
... More
ALLUMINIUM DOORS,WINDOWS OTHER WORKS:
Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150 mm x 100 mm in 1:3:6 mix including providing and fixing handles,friction stays,joining cleat,bolting device,locking arrangments,spring catch as required completeas specified and directed for all levels.(Cement concrete to be measured and paid separately).
Side hung and top hung windows and ventilators
5 mm clear glass
886.34
-
-
... More
Fixed windows and ventilators
5 mm clear glass
2419.03
-
-
... More
Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections having thicness atleast 1.9 mm of approved brand ( HINDALCO/JINDAL/BHAGWATI SAI (WITH PROOF PURCHASE OF IGNOT FROM PRIMARY PRODUCER) other equivalent without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels.
2 Track sliding window
5 mm clear glass
1842.89
-
-
... More
3 Track sliding window
5 mm clear glass
4454.04
-
-
... More
Providing, fitting and fixing anodised aluminium framed double leaf glazed doors with anodised aluminium frame made of 100mm x 45mm x 2mm section of approved brands with door styles of size 81mm x 45mm x 2mm, top rails 50mm x 45mm x 2mm, lock rails 81 mm x 45mm x 2mm,bottom rails 100mm x 45mm x 2mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the Department at all levels. 6mm clear glass
1579.14
-
-
... More
Providing and fixing anodised aluminium framed single leaf door of approved brand with styles size 45mm x 48mm x 3.2mm, top rails 50mm x 45mm x 2.5mm, lock rails 48 mm x 45mm x 2.5mm, bottom rails 100mm x 45mm x 2.5mm fitted with tapper clips of size 20mmx15mmx1.2mm complete with automatic hydraulic floor mounted door closure, butterfly type handles, special cylindrical locks, concealed type tower bolt,neoprene dryset rubber gusket, etc.complete as directed by the Department at all levels. 6mm clear glass
1850.36
-
-
... More
Prelaminated Board
787.03
-
-
... More
Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete etc complete as specified and directed by the department at all levels. with 12 mm thick toughened glass
23.21
-
-
... More
Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to
Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor
bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof.
The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.
4139.04
-
-
... More
Providing and fixing of aluminium curtain glazing made out of Anodised section of approved shade section of 6 nos 1.2m each @ 1.819 Kg/m, 6 nos 1.2m each @ 0.515 Kg/m, 6 nos 1.2m each @ 0.317 Kg/m of Jindal or equivalent complete with rubber gasket and all other accessories, including fixing of 5mm tinted glass as and where necessary.
Using Coloured Anodised section
745.47
-
-
... More
Providing , fabrication and fixing of structural glazing made out of coloured Anodised aluminium mother frame 6 nos 1.2m each @ 1.819 Kg/m and subframe of 16 nos 0.60 m each @ 0.31 Kg/m of Jindal or equivalent and 5 mm reflective glass of approved shade. The glass to be pasted using structural selicon (DC 995) and weatherseal silicon to be used (DC 789), the structure complete with all accessories as and where necessary.
80.23
-
-
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:
(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.
(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners,
SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
1034.76
-
-
... More
Providing and fixing Horizontal / Vertical Aluminum louver panel as per the drawings enclosed as per approved shade, fabricated out of heavy duty aluminum extruded profiles ( Powder coated / anodised ) fixed with Aluminium tube outer frame. All aluminum members & profiles shall be of AC 25 grade as per specification. The Aluminum members shall be protected with Masking Tapes all around the profiles for safety against external scratches at site (Masking Tapes shall be removed only at the time of handing over as per the instructions of Developer).
The fabrication shall be done with all the joints mitered; the Outer Frames and Mullions jointed with appropriate Stainless Steel Screws, Heavy Duty Aluminum Angle, Cleat, box sleeve etc. EPDM gaskets to be used for preventing Bimettalic corosion wherever required.
The fixing shall be done on to MS frames or existing openings at anchorage locations, in windows , walls , Glazing jambs, cills and heads etc by drilling holes with an electric drill, inserting fasteners, stainless steel counter sunk screws etc.
873.64
-
-
... More
Providing & fixing Aluminium Louvers Panel machine made, finished with approved shade of powder coating(min. 50 micron) .The form & design as per Architectural detail drawing.Fixing of the panel on Aluminium Brackets as per approved manufacturer detail.
930.53
-
-
... More
Supplying, fitting and fixing anodised aluminium decorated grill with anodised aluminium rectangular frame of 'F' and 'H' section fitted with walls, columns or stiffeners by special type of screws as per specification by the Department for all levels. (Aluminium Alloy procured from primary aluminium producer (On submission of certificate of alloy purchaging from primary producer)
5031.84
-
-
... More
Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded).
108.3
-
-
... More
Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately).
59.85
-
-
... More
Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per direction of Engineer-incharge. The glass shall be clear, toughened, interlayered, non-wired fire resistant having 11 mm thickness of approved brand with 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 15 min of insulation (EI15) and having a sound reduction of ?37dB and LT of 86%. Glass shall be compliant to class 2(B)2 category of Impact Resistance as per EN 12600. The glass should be manufactured in UL & TUV audited Facility and including UL-EU Certification.The maximum glazing size cannot be more than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total area. The test report for the complete system (Glazed Door or Partition) will be considered valid only if it contains the stamp and signature of the authorized signatory from the glass manufacturer. (Actual glass size is to be measured at site for payments).
59.85
-
-
... More
Providing and fixing Lead panel to flush door as per AERB norms at the core areas of the bulding structure such as radiology department
107.1
-
-
... More
Providing and fixing wall panelling with Lead as per AERB norms at the core areas of the building structure such as radiology department
1120
-
-
... More
PAINTING WORKS Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after throughly brooming the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth.
Priming coat with distemper primer
120906.06
-
-
... More
Top coat
120906.06
-
-
... More
Extra over item no (m), (n) above for distempering with oil bound distemper of approved brand and manufacture on celing and sloping roof.
12617.61
-
-
... More
PLASTER OF PARIS & WALL PUTTY
Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)
Thickness = 1.5 mm thick
256323.09
-
-
... More
WALL PAINTING
Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.
Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)
8490.31
-
-
... More
Extra over item no 13.4.1 above for painting with acrylic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on celling and on sloping roof.
Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)
8490.31
-
-
... More
Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.
Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)
59941.53
-
-
... More
EXTERIORS PAINTS/ COATINGS
Finishing wall with two coats of acrylic emulsion exterior coatings of Unicem "Rakshak" brand of required shade by thinning 1ltr. of paint with 750ml of water to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department.
56316.69
-
-
... More
PAINTING ON WOOD AND WOOD WOOD BASED SURFACES Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. With ready mixed paint , Wood primer (pink)
6085.83
-
-
... More
Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.
Surfaces over 100mm in width or girth.
General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).
6035.83
-
-
... More
Extra over item no124for every subsequent coat of paint. Surfaces over 100mm in width or girth.
General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).
5535.83
-
-
... More
PAINTING ON STEEL AND OTHER METAL SURFACE
Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.
With ready mixed "red-lead/ red oxide" primer.
1150
-
-
... More
Applying primary coat over new steel and other metal surface upto 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.
With ready mixed "red-lead/ red oxide" primer.
9047.6
-
-
... More
Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.
Surfaces over 100mm in width or girth.
General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).
1350
-
-
... More
Surfaces up to 100mm in width or General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).
9777.6
-
-
... More
Extra over item no.128 &129 for every subsequent coat of paint.
Surfaces up to 100mm in width or girth.
General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).
9877.6
-
-
... More
DOOR AND WINDOW FITTINGS:
Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )
Sliding Door Bolt
300mm x 16mm
2473
-
-
... More
250mm x 16mm
1233
-
-
... More
Tower bolts
200mm x 12mm
8431
-
-
... More
Door handles
150mm
7950
-
-
... More
Hydraulic door closure
2467
-
-
... More
Door stopper with rubber stopper
3322
-
-
... More
REINFORCEMENT
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (No extra measurement for lap,hooks,chair,anchor etc.will be entertained inthe measurment as they are included in the rate)(upto 1st floor level). From Primary Producer : TATA/SAIL/Esser Steel/Jindal Steel/Shyam Steel/RINL
TMT-Corrosion Resistant Steel (CRS) reinforcement bar
59570.71
-
-
... More
Extra over item 137for each subsequent floor or part thereof above first floor level.
22763.88
-
-
... More
ROOF TRUSS
Providing fitting, hoisting and fixing of roof trusses including purlins fabricated out of M.S. circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. TATA make circular hollow section CHS of grade YST-310 conforming to I.S. Specification : 1161-1998
10122.38
-
-
... More
COLLAPSIBLE/ ROLLING SHUTTERS
Providing and fixing rolling shutters of approved make made of 80mm wide M.S. laths interlocked together through their entire lenth and jointed together at the ends by end-locks mounted on specially designed pipe shaft with bracket plates, guide channels and arrangements for inside and outside locking with push-pull operation complete including cost of wire, spring and hood cover for the shutters.
86.04
-
-
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
M.S. tube
5107.9
-
-
... More
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
166950.01
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
34713.16
-
-
... More
Construction of a pergola ( Width = 2.0 m, Height of the side posts = 1.8 m, Height at the apex = 2.8 m) with angle iron of size 50 mm x 50 mm x 5 mm (placing at 2000 mm apart ) embedding the iron posts in P.C.C. base ( not less than 600 mm) covering at the top and sides by chain link fencing, painting one coat of primer and two coats of paint including supplying and planting of flowering climbers as enclosed from both sides ( 3 nos. per metre in one side ) of the pergola to facilitate climbing by pit making (30 cm x 30 cm x 30 cm) filling the pit with the mixture of soil and organic manure and necessary maintenance by trimming etc complete as specified and directed by the department. (P.C.C. and soling to be measured and paid separately)
25
-
-
... More
Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200mm apart from bottom flat to middle flat including drilling, welding etc. complete. All vertical bars are to be protruded at least 100mm above the middle and top flat is to be flattended and pointed as directed. Necessary locking arrangement on both faces, arrangement for temporary closing the gate and 2 nos.( minium) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embeded in C.C brick pillars as necessary including a red oxide painting to all iron works as directed and specified. (Separate payment will be made for posts).
23.54
-
-
... More
PLINTH PROTECTION:
Providing plinth protection with bricks laid on edge and grouted with cement mortar 1:4 and finishing with cement pointing in prop. 1:1 complete.
3759.51
-
-
... More
Horticulture and Landscaping Trenching in ordinary soil upto a depth of 60cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling with in a lead of 50m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
4500
-
-
... More
Supplying and stacking of good earth at site including royalty and carriage upto 1 km (earth measured in stacks will be reduced by 20% for payment).
300
-
-
... More
Supplying and stacking at site dump manure from approved source, including carriage upto 1 km (manure measured in stacks will be reduced by 8% for payment) :
Screened through sieve of I.S. designation 20mm
250
-
-
... More
Spreading of sludge, dump manure or/and good earth in required thickness (Cost of sludge, dump manure or/ and good earth to be paid separately).
250
-
-
... More
Mixing earth and sludge or manure in proportion specified or directed.
250
-
-
... More
Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth shall be paid for separately).
In rows 5 cm apart in both directions.
30000
-
-
... More
HEDGE PLANTING / EXTERNAL HEDGE
Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth shall be paid for separately). ADOPTING SINGLE ROW PLANTING METHOD
With Duranta
150
-
-
... More
With Coleus
100
-
-
... More
Tree Planting
Supplying and planting of ornamental trees (1'-0" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . SHADE TREE
Neem / Mahaneem / Beef wood / Bakul / Acacia / Siris / Devils tree / Kadam / Palash / Pink Cassia / peepal / Silver oak / Simalu / Ajar
75
-
-
... More
SHRUB PLANTING Supplying and planting of ornamental shrub ( below 1'-0" height ) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . Radhachura / Krishnachura / Rat ki rani / Ixora / Jetuka
100
-
-
... More
Making tree guard 53 cm dia and 1.3 m high as per design from empty coal tar drums including providing and fixing 2 nos. M.S. sheet rings (50 x 0.50) mm with rivets complete in all respects including painting inside and outside of tree gaurd .
100
-
-
... More
PILING WORK:
Providing cast in-situ machine driven reinforced cement concrete piles of required bore-diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings including using of Bentonite solution. (Reinforcement to be measured and paid seperately as per item no. 21.4.1)
UNIFORM PILE
Concrete Grade M25
Pile dia 300 mm
36823.18
-
-
... More
Pile dia 400 mm
79690.81
-
-
... More
MISCELLANEOUS
Extra for using admixture & plasticiser RCC grade M25
Pile Dia 300 mm
36823.18
-
-
... More
Pile Dia 400 mm
79690.81
-
-
... More
Extra for boring specified diameter pile in high sub-soil water level requiring use of drilling mud and extra cement
300 mm dia
36823.18
-
-
... More
400 mm dia
79690.81
-
-
... More
Demolishing R.C.C./ P.C.C. pile head of different diameters carefully without disturbing the remaining portion of the pile including opening out of the pile head to be demolished by excavating the earth upto required depth and clearing the debris as directed.
804.37
-
-
... More
REINFORCEMENT
Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning, cutting and bending to proper shapes and length as per specifications and drawings. The rings should be welded with vertical reinforcements as per specified IS codes of practice.
TMT bar made of primery producer (From Primery Producer)
15796.56
-
-
... More
LOAD TEST ON PILES Routine test for test loading to 1.5 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load)
3171
-
-
... More
Initial test for test loading to 2 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load)
3171
-
-
... More
Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893 including surface preparation of pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerised equipment and high skill trained personal for conducting the test & submission of results, all complete as per direction of Engineer-in-charge.
2701
-
-
... More
WATER PROOFING WORK:
SURFACE PREPARATION
Preparing the RCC surface in roof slab, chajjas, terraces, sunken slabs, septic tank, OH tank, raft slab, walls etc. by thoroughly cleaning with wire brush etc. followed by power washing for making the surface absolutely free from any foreign particles like dust, oil, grease etc. and allowing surface to dry complete as directed at all levels.
24529.47
-
-
... More
Supplying, mixing, laying and applying the following waterproofing systems over Raft slabs, Roof slabs, Terraces etc. including curing complete as specified and directed by the Department at all levels.: (i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals mixed with cement in the ratio 1:2 as a prime coat. (ii) 3mm thick Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81 @ 15% by weight of cement. (iii) 1mm thick coat of Master Crete M-81 mixed with cement in the ratio 1:2 as final coat.
19914.8
-
-
... More
Providing and applying over sunken slab etc., two coats of waterproofing slurry prepared with neat cement, water and modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Dr. Sealkit Masterbond Latex (Asian Chemicals)/ RHEOMIX 141 by brush after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department complete.
3033.68
-
-
... More
PRE CONSTRUCTION ANTI - TERMITE TREATMENT
Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.
with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.
30201.84
-
-
... More
Pre construction anti - termite treatment by applying the soil along the external perimeter of the building (after construction completed) to a distance close to the plinth wall as specified and as directed by the deptt. up to a depth of 300mm making rod holes along the line @ 150mm apart to a depth of 300mm and applying emulsion @ 4.5 litres per running meter ensure moistening of the soil with emulsion (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.
with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.
4996.7
-
-
... More
Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.
with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.
6302.68
-
-
... More
Pre construction anti - termite treatment in the back fill in immediate contact with the foundation structure after completion, column, wall etc. to a depth of 450mm and width 300mm (when required refill in 200mm thick layers) applying the emulsion @ 5 (five) litres per square meter towards the concrete and masonry walls so as to ensure earth in contact with the structure well treated - with chemical (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.
with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.
21692.04
-
-
... More
ROAD WORK
Supplying and stacking at site. 90 mm to 45 mm size stone aggregate.
3176.12
-
-
... More
63 mm to 45 mm size stone aggregate.
2223.28
-
-
... More
53 mm to 22.4 mm size stone aggregate.
1870.38
-
-
... More
Stone screening 13.2 mm nominal size (Type A).
458.77
-
-
... More
Stone screening 11.2 mm nominal size (Type B).
388.19
-
-
... More
Moorum
100
-
-
... More
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .
20251.89
-
-
... More
PRIME COAT
Surface dressing one coat on new surface with bitumen of specified grade at a rate of 1.95 kg/sqm. of surface area with 1.5 cum. of stone chippings 13.2 mm nominal size per 100 sqm. of road surface including consolidation with road roller of 6 to 8 tonne capacity , etc. complete :
Using bitumen emulsion (minimum 50% bitumen content - RS grade conforming to IS : 8887).
35290.23
-
-
... More
TACK COAT
Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. On bituminous surface @ 0.25kg/sqm.
35290.23
-
-
... More
PREMIX CARPETING
Providing and laying Bitumen Penetration Macadam with hard stone aggregate of quality, size and grading as specified, with bitumen of suitable penetration grade including required key aggregate as specified, spreading coarse aggregate with the help of self propelled / tipper tail mounted aggregate spreader and applying bitumen by a pressure distributor and then spreading key aggregate with the help of aggregate spreader complete including consolidation with road roller of minimum 8 to 10 tonne capacity to achieve specified values of compaction and surface accuracy :
For 50mm compacted thickness using coarse aggregate of size 50-20 mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10 sqm. With paving asphalt grade VG - 10 @ 50 kg/10 sqm.
35290.23
-
-
... More
SEAL COAT.
Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade VG - 10 and blinding surface with 0.90cum of stone aggregate of 6.7 mm size (Passing 11.2mm sieve and retained on 2.36mm sieve) per 100 sqm of road surface including rolling and finishing with power road roller all complete.
35290.23
-
-
... More
PAINTING ROAD / RUNWAY MARKING Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete.
New work (Two or more coats)
500
-
-
... More
Making bell mouth opening/ entrance of size 100x50x50cm for drainage pipe under footpath including providing cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) for shape of bell mouth including plastering providing and fixing precast R.C.C./ S.F.R.C. slab including plastering with cement mortar 1:3 (1 cement : 3 fine sand) of 6 mm thickness on exposed surface of the slab & bell mouth including centring, shuttering & neat cement punning inside the bell mouth etc. all complete.
150
-
-
... More
Providing and laying of inter locking concrete block pavement (ICBP) with cement concrete paver blocks as per IS 15658-2006 of thickness 80mm and 28 days compressive strength not less than 30 N/m over a layer of bedding sand of compacted thickness 30mm, laid either in stretcher/ running/ herringbone pattern of bonds as directed by the engineer and in proper level and grade and compacted with appropriate equipment such as plat vibrator along with spreading of a thin layer of joint filling sand to fill up the gaps between blocks including construction of edge restraint wherever required complete as per drawings and Technical specification clause 1504 of MORD.
32216.06
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
387.07
-
-
... More
Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete
450 mm dia. R.C.C. pipe
400
-
-
... More
ACOUSTIC TREATMENT:
Supplying, fitting and fixing SoundSoak FSS Cordura wrapped acoustical wall panel system of Anutone Acoustics Ltd. Including all fixtures and Armstrong OPTRA high acoustical wall panelling with fibre glass substrate 25 MM thick
747.94
-
-
... More
Armstrong Wood works acoustical wall panelling
1360.03
-
-
... More
Providing & fixing Armstrong Mineral fibre Acoustical suspended ceiling system with beauty sky ( board/tegular) edge tiles with armstrong 24mm exposed grid (600x600x15)mm
22807.93
-
-
... More
PLUMBING WORKS (INTERNAL AND EXTERNAL
NOTE - Before the start of this Subhead, Detailed Shop drawing /Product submittal are to be prepared by the contractor and the same has to be approved by the consultant .Only after this approval the work has to start. Providing fitting and fixing white vitreous china pedestal type water closet (European type W.C pan 400mm high ) of Parryware/Hindware make with seat and lead ,CP brass hinges and rubber buffers ,10 litre low level PVC flushing cistern with fittings, CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. White
Universal colset P type (cat no. C0272) inclusive of seat cover
774
-
-
... More
Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately)
Indian type W.C Orissa pattern of size 580 x 440 mm Jaquar make
258
-
-
... More
Renewing vitreous china wall hang water closest(European type W.C. pan 400mm high) with seat and lead ,CP brass hinge and rubber buffers,CI/MS brackets,40mm dia fuse band with fittings including paintings of fittings and brackets,required(Flushing Cistern to be paid seperatley)
Parryware
Pal walvit pan (inclusive of seat cover and fittings)(white/coloured)(Cat.No.C844K)
116
-
-
... More
Renewing concealed cistern with all internal fittings with CI brackets incuding fitting and fixing standard size CP flush pipe,union clamps etc.complete as directed and specified (pipes will be measured seperatley)
Parryware make
Rios with chorme push Plate(Cat. No.8174/Cat.No.C813726)
10
-
-
... More
Providing and fixing viterous china flat back type lipped urinal basin of with automatic flushing cistern with standard flush pipe and CP brass spreader and brass union etc complete including painting of fittings and brackets cutting and making good the wall and floors what ever required
Parry ware make white Integrated EFS-smart DC Cat C8182 ?integrated EFS amart ac with power source
173
-
-
... More
Supplying and fixing of vitreous china division plate including fittings and fixing complete as desired and specified Parrryware make white
169
-
-
... More
Providing vitreous china wash basin of size 630 x 450mm of Parryware/ Cera make with CI/ MS brackets. 32mm CP brass wate coup;ing of standard pattern, C.P brass chain with plug. PVC wate pipe including painting of fittings and brackets, cutting and making good the walls and slabs wherever required. White vitreous china wash basin of size 630mm x 450mm
1101
-
-
... More
Providing fitting & fixing white vitreous china kitchen sink of parryware make with CI/MS brackets ,CP brass chain with rubber plug, PVC waste pipe etc.complete including painting the fittings,cutting & making good the wall wherever Kitchen sink of size (610x460x254)mm
182
-
-
... More
Providing fitting& ficing laboratory sink of parryware make with CI/MS bracket, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fitting, cutting & making good the walls wherever required. (sinkcock, stop cock, waste coupling are to be paid seprately.
Parryware make
white Lab sink 450m (cat.No. C0602)
30
-
-
... More
Providing fitting and fixing mirror with plastic frame of size 500 x 400mm complete as directed and specified.
1030
-
-
... More
Providing, fitting and fixing recessed soap tray of Hindware make completed as specified and directed.
Parryware Recess SP & SG dish (Cat.No. C9935)
909
-
-
... More
Providing,fitting and fixing liquid soap dispenser and liquid soap container of Agmeco make compleate as specified and directed.
jaquar
Continental (Cat.No.ACN-1135N) (with glass bottle)
300
-
-
... More
Providing, fitting and fixing chrome plated (CP) towel rail of Jaquar make complete as specified and directed.
Continental towel ring square (Cat.No. ACN-1121)
Continental 300mm for wash basin (Cat.No. ACN-1101N)
851
-
-
... More
Providing fitting and fixing chrome plated (CP) towel ring of Jaguar make completed as directed and specified.
Continental towel ring square (Cat.No. ACN-1121)
413
-
-
... More
Providing fitting and fixing chrome plated (CP) robe hook of jaguar make complete as directed and specified.
jaquar
Continental (Cat.No. ACN-1191N)
328
-
-
... More
Providing fitting and fixing chrome plated (CP) toilet paper holder of Jaguar make completed as directed and specified. Jaquar make Continental toilet paper holder (Cat.No. ACN-1151N)
327
-
-
... More
Providing fitting and fixing chrome plated waste coupling ( half thread HT and full thread FT ) complete as directed and specified. Jaquar make 32mm (HT/FT) (Cat.No.ALD-705 / 709)
1101
-
-
... More
Providing fitting and fixing C.P. bottle trap Indian type with outlet pipe and wall flange of following size Ark Sona make for basin etc. complete as directed and specified.
Sona make Bottle trap indian 32mm (Cat. No.BT-0751)
1279
-
-
... More
Supplying fitting and fixing PVC pipes of 6Kgf/cm2 ( Supreme/Prince) or other ISI approved including joining, fitting and fixing with clamps etc. as necessary complete at all level including below G.L. as directed and specified.(FOR RAIN WATER)
In exposed surface or in trenches. 160mm dia.
2152
-
-
... More
110mm dia.
8256
-
-
... More
75 mm dia
8369
-
-
... More
Supplying fitting and fixing 87.5 degrees PVC bend of ( Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified. In exposed surfaces or in trenches. 110mm dia.
1228
-
-
... More
75mm dia.
1304
-
-
... More
Supplying fitting and fixing PVC Plains single tee of ( Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified.
In exposed surfaces or in trenches.
110mm dia.
908
-
-
... More
75mm dia.
983
-
-
... More
Supplying fitting and fixing PVC single tee with door ( Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surface or in trenches. 110mm dia.
690
-
-
... More
75mm dia.
767
-
-
... More
Supplying fitting and fixing PVC single 'Y' of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified. In exposed surface or in trenches. 110mm dia.
1249
-
-
... More
75mm dia.
1014
-
-
... More
Supplying fitting and fixing PVC coupler of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified. In exposed surface or in trenches.(FOR RAIN WATER)
110mm dia.
4766
-
-
... More
75 mm dia.
4744
-
-
... More
Supplying fitting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. in exposed surfaced or trences as necessary complete at all levels including below G.L as directed and specified. 110mm.
5448
-
-
... More
75mm.
5724
-
-
... More
Providing fitting and fixing 110mm dia. PVC cowel with ISI make complete as directed and specified.
110 mm dia PVC cowl of ISI make
307
-
-
... More
75 mm dia PVC cowl of ISI make
352
-
-
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the wall and floor:
100 mm inlet and 75 mm outlet
PVC
963
-
-
... More
INTERNAL WATER SUPPLY
Solar water Heater
Supply and fixing of Solar flat plate collector with tanks, supporting stands and all necessary valves and fittings(Note: For details refer technical specification & drawings). The system shall be Gravity flow as per IS standards. There will be provision of heating by electrical back up in the absence of sufficient solar radiation 3000 lts
3
-
-
... More
2000 lts
4
-
-
... More
1000 lts
16
-
-
... More
500 lts
5
-
-
... More
Providing, Installation, testing and commissioning of compact self contained hydropneumatic system for domestic water including the following:
Pump Classification: Hydro-Pneumatic Booster System
Pump Construction: Pump With Motor
Numbers of Pump in System: 4 Pump
Version: Cast Iron & S.S AISI 304
Seal Material: Carbon/SiC/SS316/EPDM
Bearing Material: Ceramic/Tungsten Carbide
Rubber Parts: NBR (Nitrile
Mounting: IEC
Enclosure: TEFC
Phase: 3
Voltage: 380-415V
Efficiency Class: IE1 / EFF2
Motor Manufacturer: Lubi
Accessories: Included
Header Flange Rating: PN 16
Pump Controller: Single VFD with HMI & PLC
Pump Controller Rating: 5.5 HP
HPN Pressure Tank: 200 litre
Flow, rated
Head, rated (requested
Head, rated (actual)
One working/One stand By CONTIND..........
-
-
-
... More
CONTIND FROM PREV. CELL........
Accessories: Included
Header Flange Rating: PN 16
Pump Controller: Single VFD with HMI & PLC
Pump Controller Rating: 4 HP
HPN Pressure Tank: 200 litre
Flow, rated : 800.0 l/min
Head, rated (requested) : 35.00 m
Head, rated (actual) : 38.54
1
-
-
... More
Pump Classification: Hydro-Pneumatic Booster System
Pump Construction: Pump With Motor
Parallel Pumping System
Numbers of Pump in System: 4 Pump
Component Materials
Version: Cast Iron & S.S AISI 304
Seal Material: Carbon/SiC/SS316/EPDM
Bearing Material: Ceramic/Tungsten Carbide
Rubber Parts: NBR (Nitrile)
Motor Specifications
Mounting: IEC
Enclosure: TEFC
Phase: 3
Voltage: 380-415V
Efficiency Class: IE1 / EFF2
Motor Manufacturer: Lubi
System Components
Accessories: Included
Header Flange Rating: PN 16
Pump Controller: Single VFD with HMI & PLC
Pump Controller Rating: 5.5 HP
HPN Pressure Tank: 200 litre
Flow, rated : 800.0 l/min
Head, rated (requested) : 50.00 m
Head, rated (actual) : 52.14 m
1
-
-
... More
Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately)
Jaguare make
Continental /Clarion Bibcock long thread
1042
-
-
... More
Supplying and fixing crome plated CP sink cock of approved brand as specified and directed (GI and cp pipes will be measured and paid seperately
Sona brand sink cock upper / lower sprout 15 mm
206
-
-
... More
Supplying and fixing of overhead adjustable crome plated spray shower 15 mm dia of sona make with wall flange as directed and specified (pipes will be mmeasured and paid seperately
Supreme shower with arm
352
-
-
... More
Supplying, fitting and C.P. pillar cock of 15mm dia of approved brand as specified and directed.
SONA make
Heavy type
1085
-
-
... More
Supplying, fitting and fixing chrome plated (C.P.) basin mixer complete as directed. Jaquar make Central hole basin mixer with small spout without popup waste system with 450mm long copper pipes and brass nuts
444
-
-
... More
Supplying, fitting and fixing chrome plated (C.P.) wall mixer complete as diredted. Sona make Wall mixer with non telephone shower arrangement only but without telephone shower crutch
294
-
-
... More
jaquar make
221
-
-
... More
Supplying, fitting and fixing chrome plated (C.P.) sink mixer complete as directed. Jaquar make Sink mixer with swinging casted spout (wall mounted model)
121
-
-
... More
Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.
1052
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixture and geyser points of approved quality confirming to IS:8931 a) 15 mm nominal bore
15 mm nominal bore
2752
-
-
... More
Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.
a) 50 mm dia.
120
-
-
... More
b) 40 mm dia.
150
-
-
... More
c) 25 mm dia.
160
-
-
... More
d) 20 mm dia.
322
-
-
... More
e) 15 mm dia.
1310
-
-
... More
Supplying and fitting ball valve as specified and directed..
a) 25 mm dia. (gun metal)
70
-
-
... More
Supplying fitting and fixing Telephonic Chrome Plated (C.P.) shower with hook w/o tube of Sona make as directed and specified. (Pipes will be measured and paid separately)
(b) Rose
599
-
-
... More
CPVC PIPE
Supplying fitting and fixing Ajoy Flowguard CPVC (Chlorinated Polyvinyl Chloride) pipes having thermal stability for hot and cold water supply including all CPVC plain and bruss threaded fitting including clamps at 1.00 m spacing including joining of pipes and fitting with one step CPVC solvent cement and testing of joints complete at all levels as directed and specified.
(Note: Ball valve and union will be charged extra and does not comes under Accessories)
In exposed surface or trenches
(a)15 mm dia outer dia
14049
-
-
... More
20 mm dia outer dia
6921
-
-
... More
25 mm dia outer dia
5092
-
-
... More
32 mm dia outer dia
4128
-
-
... More
40 mm dia outer dia
1417
-
-
... More
50 mm dia outer dia
1050
-
-
... More
Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed 63 mm dia outer dia
400
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m
Pipes, cables etc. exceeding 80mm dia. But not exceeding 300mm dia.
1685
-
-
... More
Pipes, Cables etc. exceeding 300mm dia but not exceeding 600 mm
2194
-
-
... More
Extra over for item no. 1.1 excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre)
850
-
-
... More
Extra over for item no. 1.1 excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 3 m, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre)
725
-
-
... More
Extra over for item no. 1.2 excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre)
1345
-
-
... More
Extra over for item no. 1.2 excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 3 m, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre)
650
-
-
... More
Open timbering in trenches including shuttering and shorring complete (measurement to be taen of face area timbered) ( as per table number 4)
Depth not exceeding 1.5 meters
2275
-
-
... More
Depth exceeding 1.5 meters but not exceeding 3 meter
805
-
-
... More
Depth exceeding 3 meters but not exceeding 4.5 meter
2275
-
-
... More
Providing laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the pro-portion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
200 mm diameter
1950
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) alround S.W./RCC pipes including bed concrete as per standard design:
200 mm diameter
1950
-
-
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 250 mm dia R.C.C pipe
1645
-
-
... More
300 mm dia R.C.C pipe
975
-
-
... More
600 mm dia. R.C.C. pipe
555
-
-
... More
Constructing brick masonry circular type manhole 0.91 m dia internal at bottom and 0.56 m dia at top with bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement
0.91 m deep with SFRC cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to IS: 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm tick cement plaster at the external surface shall be paid for separately)
With F.P.S. bricks with class designation 75
325
-
-
... More
Extra depth for circular type manhole 0.91m internal dia (at bottom) with beyond 0.91m to 1.67m
With F.P.S. bricks class designation 75
65
-
-
... More
Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top with 35 class designation F.P.S brick in cement mortar 1:4 ( 1 cement: 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 mix (1 cement :3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.
1.68 m deep with SFRC cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to IS: 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm tick cement plaster at the external surface shall be paid for separately)
With F.P.S. bricks with class designation 75
125
-
-
... More
Extra depth for circular type manhole 1.22m internal dia (at bottom) with beyond 1.68m to 2.29m
With F.P.S. bricks class designation 75
15
-
-
... More
Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top IN CEMENT MORTOR1:4 (1 CEMENT: 4 COARSE SAND)inside cement plaster 12 mm thick with cement mortor 1:3(1 cement :3 coarse sand)finished with floating coat of neat cement foundation concrete 1:3:6(1 cement:3 coarse sand :6 graded stone aggeregate 40 mm nominal size and making necessaryt chanel in cement concrete 1:2:4(1 cement :2 coarse: 4 graded stone agregate 20 mm nominal size finished with floating coat of neat cement all complete as per standard design:
2.30 m deep with SFRC cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to IS: 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm tick cement plaster at the external surface shall be paid for separately)
With F.P.S. bricks with class designation 7.5
35
-
-
... More
Extra depth for circular type manhole 1.52m internal dia (at bottom) with beyond 2.30m to 9m
With F.P.S. bricks class designation 75
195
-
-
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12 mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30 x 20 x 15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
450
-
-
... More
MBBR TECHNOLOGY
Supply, installation, testing & commissioning of 2 No stainless perforated bar screens made of SS grade 304 of size 1000 mm x 800 mm at the inlet of Equalization tank 2NOS
Supply, installation, testing & commissioning of submersible open impeller sewage transfer pumps with solid handling capacity up to 40 mm with CI casing & CI impeller complete with all the required accessories, motor of required capacity. The pumps shall be complete with Base frame, Delivery header with pressure gauge on delivery line. Pumps shall have following duty:
Submersible Pumps 3 Nos (2W + 1 S).
Flow rate (each) = 20.0 m3 / hr @ 8-10 M head Make - Kirloskar/ CRI/CNP 3nos
Supply, installation, testing & commissioning of Twin type rotary air blowers (2W+1S) capable of delivering 400 m3/hr capacity of free air at 5000mm WG pressure through"V" belt or directly coupled through flexible coupling to a TEFC motor of suitable H.P suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply. The blower & motor shall be complete with base frame, header & pressure gauge. Make Everest/ Airvac/TMVT - 3 nos
Air piping shall comprise of pipes droppers/laterals heavy duty MS (epoxy coated) Header complete with all fittings such as tees, crosses, plugs, sockets, elbows, reducers, supports & clamps, and all submerged piping will be SS 306 grade 2 mm thick etc cutting chases & making good.- 1 lot CONTD...............
-
-
-
... More
Supply, installation, testing & commissioning of adequate capacities Ceramic air diffusers (fine diffusers ) in Aeration Tank and (coarse diffusers) for EQT tank and Fine duffuser for MBBR Tank for aeration.- 3nos Providing and fixing all piping (as described below) and isolation control valves for making the system complete.
SS 304 :Submerged air piping
MS heavy duty with Epoxy : Air piping-1no
Supplying, installing, testing & commissioning of air lifting system for sludge transfer. -1 no Supply, installation, testing and commissioning of bio deck FAB media to be installed in MBBR Tank and PVC tube deck settling media to be installed in Secondary Settling Tank along with suitable sludge removal arrangement. The media should be UV resistant with suitable thickness of approved make
Make : MM Aqua/Bharat Industries - 1NO
Filter feed pump : Supplying, installing, testing, commissioning of centrifugal horizontal Monobloc Filter feed water pumps with CI casing and bronze impeller, mechanical seal along with motor, pressure gauge with isolation cock, Isolation valve, NRV on delivery line. Isolation valve, strainer at suction. The pump shall be suitable for 415±10% volts 3 phase AC Supply .
Capacity : 42.0 m3/hr.
Head : 25-30 m
No. of Pumps: 2 Nos. ( 1 working + 1 standby)
Make : Kirloskar/CRI/CNP/eqvi. - 2NOS CONTINUED......
-
-
-
... More
Supplying, installing, testing, commissioning of screw pumps with CI casing, case hardened and alloy steel shaft along with motor, pressure gauge with isolation cock, Isolation valve, NRV on delivery line, Isolation valve. The pump shall be suitable for 415±10% volts 3 phase AC supply .
Capacity : 3 LPS.
Head : 40 m
No. of Pumps: 2 Nos. ( 1 working + 1 standby)
Make : ROTO/Roto Mac .- 2NOS
Supplying, installing, testing and commissioning of MSRL vessel filter with frontal piping and valves with all the required accessories. Filter shall include media, standard fittings like pressure gauges, sampling cock, rinse drain
Multigrade Filter Flow rate :42 cum/hr
Filter Diameter : 2000 mm.
HOS : 1800 mm
filtering sand, anthracite, pebbles and gravel media
MOC: MSRL
Thickness : 10 mm shell and 12 mm dish
Face piping 150 mm dia with test code, audco make butterfly wall- 1NO
Activated Carbon Filter
Flow rate :55 cum/hr
Filter Diameter : 2200 mm. CONTD.........
-
-
-
... More
HOS : 1800 mm
Media - Activated Carbon of I value 800
Thickness : 10 mm shell and 12 mm dish
MOC: MSRL
Face piping 150 mm dia with test code, audco make butterfly wall- 1NO
UV Alfa - 1NO
Gardening Water pump To feed the treated water for gardening purpose Type- Centrifugal, Monoblock, horizontal , Self priming
Capacity- 4 m3/hr
No. of Pumps: 2 Nos. ( 1 working + 1 standby
Head- 30 m
MOC – CI, Make – Kirloskar or equal - 1NO
Back wash water Pump :Supplying, installing, testing, commissioning of centrifugal horizontal Monobloc Filter feed water pumps with CI casing and bronze impeller, mechanical seal along with motor, pressure gauge with isolation cock, Isolation valve, NRV on delivery line. Isolation valve, strainer at suction. The pump shall be suitable for 415±10% volts 3 phase AC Supply .
Capacity : 20 m3/hr.
Head : 25-30 m
No. of Pumps: 2 Nos. ( 1 working + 1 standby)
Make : Kirloskar/CRI/CNP/eqvi. - 2NO CONTD...........
-
-
-
... More
Sump Pump Supply, installation, testing & commissioning of submersible open impeller sewage transfer pumps with solid handling capacity up to 40 mm with CI casing & CI impeller complete with all the required accessories, motor of required capacity. The pumps shall be complete with Base frame, Delivery header with pressure gauge on delivery line. Pumps shall have following duty:
Submersible Pumps 3 Nos (2W + 1 S).
Flow rate (each) = 30.0 m3 / hr @ 8-10 M head Make - Kirloskar/ CRI/CNP- 3NO Supply, installation, testing and commissioning of filter press of Suitable Capacity 18"x 18"x 20 Plates with CI frame, PP plates with filter cloth interconnecting piping and poly dosing system complete. (Make- Auro/NM Patel/ Pharmatech)- 1NO
Supply, installation, testing & commissioning of electronic type Pressure switch/Transmitter along with hooter for indication of backwash cycle with all filtration vessel- 3NOS
Piping & Valve CONTD...........
-
-
-
... More
Complete lot to be provided as per required specifications. Shop Drawings & Technical Specification to be Submitted for Approval.
Material : G.I./MS/SS/ HDPE
Make: Tata / Zenith/Jindal
Electricals and Instruments- 1 LOT
Supply, installation, testing & commissioning of Magnetic flow meter in treated water line of 100 mm bore size Make: Hydrocon / Benz- 3NOS
ELECTRICAL INSTALLATION FOR STP
Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre fabricated out of 14 gauge CRCA sheet steel. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel before fabrication. Quoted rates shall be inclusive of cables (in accordance to specification) with earthing from panel to each motor/equipment.
Motor Control Centre
Incoming
400 amps TPN MCCB with the following accessories:
a. 0-500 volts 96 x 96 mm square electronic voltmeter with selector switch shall be protected by 2 amps TP MCB. 1 Set
b. 0-100 amps 96 x 96 mm square electronic ammeter with selector switch and 100./5 amps 10 VA CL:1 CTs. 1 Set cont........
-
-
-
... More
c. Phase indicating lamps shall be protected by 2 amp SP MCB 3 Sets
Bus Bar
400 amps TPN (15 KA) copper bus bar with heat shrinkable insulation sleeves.
Outgoing
a. Required Nos of required capacity TPN MCB for direct on line starter/
star delta starters and out going feeders to all the pumps/blowers etc. (including standbies). Each compartment shall contain auto/manual selector switch and indicating lamp with MCB’s for ‘ON/OFF/TRIP’ status of motor
b. Spare MCB’s of following capacities:
i. 32 amps TPN MCB’s 3 Nos.
c. Necessary cable alleys, internal/cabling, wiring, cabling 1 No
from MCC to various pumps/equipment and interlocking, earthing for all equipment shall also included
a. All MCCBs/MCBs shall be of 15 KA breaking capacity and suitable for motor duty application.
b. All motor starters shall be provided with Automatic level controller.
c. DOL starters shall be used for mototrs below 10HP and Star-Delta Starters for other motors .
d.Provision shall be made for providing potential free contacts to all pumps starters
MCC for all STP equipments/pumps as described in sub head -A
Pressure Gauges Location - Delivery line of Blowers
Type - Bourdon / Diaphragm
Range- 0 to 4 Kg/ cm2 1 LOT
1
-
-
... More
ETP
BAR SCREEN Application- Screening of floatable matter
MOC- SS-304 Size of spacing – 20 mm & 10 mm
Make- Eco-Panacea -1 no
EFFLUENT LIFT PUMP SET
Application- To feed Effluent water to Flash Mixer
Type- Centrifugal, Monobloc, horizontal
Capacity- 12.5 m3/hr,
Head- 10 m,
MOC – CI, Make – Kirloskar(1W+1S) -2 nos CHEMICAL DOSING SYSTEM Application - Storage of Chemical Solution
Type- Vertical Capacity-500 Ltr
MOC – HDPE, Make-Sintex
DOSING PUMP
Application - To dose the Chemical solution
Type- Electronic, Diaphragm
Capacity-0-10 Lph Pump Make: Edose/Equivalent -1 lot Continued.........
-
-
-
... More
TUBE SETTLER MEDIA
Length – 750 mm
MOC- PVC UV Stabilized, Make: Bharat Industries / Cooldeck -1 lot
AGITATOR Shaft MOC –SS-304 Motor make – Crompton -2 nos AERATION GRID FOR EQUALIZATION TANK
Application - For providing air in Equalization tank
MOC –PVC/UPVC
Accessories- Complete with piping & valves Make-Eco-Panacea - 1 lot
COARSE AIR DIFFUSERS FOR EQUALIZATION TANK
Application - For providing air in Equalization tank
MOC –PVC/PP
Type: Coarse - 1 lot
AERATION GRID FOR BIO REACTOR Application - For providing air in Aeration Tank
Accessories- Complete with piping & valves MOC – PVC/UPVC
Make- Eco-Panacea - 1 lot
AIR DIFFUSERS FOR AERATION REACTOR
Application - For providing air in Aeration reactor
MOC – PVC/PP
Type: Fine - 1 lot
Continued.......
-
-
-
... More
MBBR MEDIA
Length – 750 mm
MOC- PVC UV Stabilized, Make: Bhatat Industries / Cooldeck - 1 lot
TUBE SETTLER MEDIA
Length – 750 mm
MOC- PVC UV Stabilized, Make: Cooldeck - 1 lot
AIR BLOWER WITH ACCESSORIES
Application - Supply of air for mixing and Aeration Tank Capacity-350 Nm3/hr x 5MWC MOC – CI, Blower make- Everest / Beta /Airvak Motor make- ABB/ Crompton Accessories- MS base plate, safety valves, suction filter, silencer, NRV, PRV, ant vibration pad, V belt, Belt guard, Drive and driven pulleys
(1W+1S) - 2 Nos FILTER FEED PUMP Application- To feed the treated effluent to Multigrade filter / backwashing
Type- Centrifugal, Monoblock, horizontal , Self priming
Capacity- 13m3/hr
Head- 25 m
Application - To dose the Hypo solution
Type- Electronic, Diaphragm Continued.........
-
-
-
... More
MOC – CI, Make – Kirloskar(1W+1S) -2 Nos
PRESSURE SAND FILTER
Application – for Removal of fine suspended solids Size – 13m3/hr
Media- under bed with graded silica sand MOC –MSEP
Make – Eco-Panacea -1 No.
ACTIVATED CARBON FILTER
Application - Removal of fine suspended solids, Color & Odor
Size – 12 m3/hr
Media- under bed with graded silica sand & Activated carbon MOC – MSEP, Make – Eco-Panacea -1 No.
HYPO DOSING TANK
Application - Storage of Hypo Solution
Type- Vertical Capacity-300 Ltr
MOC – HDPE, Make-Sintex
DOSING PUMP
Capacity-0-10 Lph Pump Make: Edose/Equivalent -1 lot
SLUDGE RECYCLING PUMP
Cap: 4 m3/hrx10M Head
Type: Monoblock
Make: Kirloskar (IW+1S) -1 No. INTERCONNECTING PIPING, FITTING & VALVES MOC: MS / GI / UPVC/Equivalent -1 lot
-
-
-
... More
ELECTRICAL WORKS
CONTROL PANEL
Control panel will be fabricated in 14 SWG CRCA sheet with non- compartment, dust & vermin proof, machine mounted
Make of Switchgears - Siemens / L & T
CABLING
Electrical cabling shall be provided from control panel to various units of sewage treatment plant Size of cable- As per the capacity of the motors / drives
MOC: Copper / Al unarmored
Make: CCI / Polycab / Equivalent
Pressure Gauges Location - Delivery line of Blowers
Type - Bourdon / Diaphragm
Range- 0 to 4 Kg/ cm2 -1 no
pH Meter -1 no
1
-
-
... More
EXTERNAL WATER SUPPLY
Piping Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe)
110mm diameter
1875
-
-
... More
160mm diameter
775
-
-
... More
200mm diameter
425
-
-
... More
250 mm dia Ductile Iron Class k-7 pipes
850
-
-
... More
Providing push-on-joints to Centrifugally (Spun) Cast Iron pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket
100 mm dia pipes
1550
-
-
... More
150 mm dia pipes
1325
-
-
... More
200 mm dia pipes
950
-
-
... More
250 mm dia pipes
625
-
-
... More
Providing and laying D.I. specials of class k-12 suitable for push-on jointing as per IS:9523
Upto 600 mm dia
250
-
-
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) (Class II)
for 100 mm nominal bore
12
-
-
... More
for 150 mm nominal bore
5
-
-
... More
for 200 mm nominal bore
4
-
-
... More
for 250 mm nominal bore
6
-
-
... More
Providing and fixing G.I. pipes complete with GI fittings including terenching and refilling etc.
EXTERNAL WORK
65 mm dia nominal bore
650
-
-
... More
80 mm dia nominal bore
400
-
-
... More
Providing and fixing gun metal valve with C.I. wheel of approved quality (screwed end):
65 mm dia nominal bore
18
-
-
... More
80 mm dia nominal bore
10
-
-
... More
Constructing masonry chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm, top diameter, 160mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design
With F.P.S. bricks
25
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up plinth level (for thrust block)
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
6
-
-
... More
Providing and fixing C.I. double acting air valve of approvedqualitywithbolts, nuts, rubber insertions etc. complete(Thetail pieces, tapersetc. if requiredwill be paid separately):
50 mm dia
4
-
-
... More
80 mm dia
4
-
-
... More
BOREWELL
Drilling by suitable rig as per IS : 2800-1979 (percussion or combination rig ) or Reverse Rotary to suit site condition from ground level in all kind of soils and weathered rock including boulders (excluding rock ) diameter of bore 450mm including carry out hydrological survey report before boring & getting the approval based on Hydrogeological survey before start of the work.Also getting approval from local authority if any required
a) 0-30m metre 90.00
b) 30-60m c) 60-90m
d) 90-120 m Extra additional for drilling in Ordinary Rock if any found
Extra additional for drilling in Hard Rock if any found Providing and lowering uPVC casing/housing pipe 200mm dia. with wall thickness 10 mm conforming to IS :12818 including sockets of standard design.
Providing & fixing uPVC screen/slotted pipe with 1.5 mm to 3mm (slots as per strata condition) including sockets of standard design as per IS: 12818/1992. 200 mm dia uPVC socketed pipe with wall thickness 10.0 mm Providing and fixing in position threaded iron cap with locking arrangement of approved design to prevent foreign matters getting into the bore-hole as required. CONTINUIED.........
-
-
-
... More
Providing and laying rounded pea gravel washed & served 3 to 6 mm nominal boreas per relevant ISI code. Providing and laying cement concrete 1:2:4 mix for sanitary sealing of well at top. Supplying, lowering and fixing in position reducer ,PVC bail plug with "U" hooks as per IS:2800-1964.
Development of Tubewell including testing of yield depression & quality of water (for all parameters of potable water), contractor to obtain certificate for quality for water from Competent Authority approved by client or Engineer- In -Charge.
a) Development of Tube well by high capacity air compressor till the clear water discharge but not more than 100 hours
CONTINUIED.....................
-
-
-
... More
b) Additional development of Tube well by high an over pumping unit till complete development of tube well does not clear by maximum 100 hours air compressor. Tranportation, mobilisation and demobilisation or drilling equipment and ancillary equipment to site including clearing and cleaning the site after completion of work.
Providing and fixing brass full way valve with C.I. wheel of approved make, tested to a pressure of 21 kg/sqcm.
a) 100 mm dia Providing and fixing gunmetal non return valve of approved make tested to a pressure of 21kg/sqcm.
a) 100 mm dia Providing & fixing G.I. pipes (heavy class)confirming to IS with special fittings in external works including earthwork ,excavationin all kinds of soil including ordinary rock,refilling, painting pipes & fitting complete in all respects.
a) 100 mm dia Providing & filling sand of grading zone V or coarser grade all around GI pipe in external work
a) 100 mm dia
2
-
-
... More
Submersible pumps
Providing andinstalling submersible pump and electrical panel suitablefor 8" diacasing of borewith SSimpeller, high tensile SS shaft, copper wound squirrel cage wet type induction motor 2880rpm, 415V, 50Hz,3phase A.C. supply, conforming to ISS: 8034-1976, capacity 500litreper minuteat 70-120mhead/ or suitableasper the hydrological survey report along with a directly coupled submersible type squirrel cage electric induction 5H.P(minimum). motor suitable for operationon400V, 3phase, 50c.p.s. A.C. supply, water lubricated bearings and provided with pivoted segment type thrust bearings to with stand non-vertical lead with minimum wear and tear withstand non-vertical lead with minimum wear andtear and duly fitted with device to take up the expansion of water withheating of motor, including supply, testing and commissioning of elctrical panel from the same manufacturer, complete with all accessories in all respects. Thecontractor to obtain approval for model and make of pumpset &suitable Electrical panel after having yield report of fully developed tube well and submite actual bore strata chart.
1 No, DOL starter of 10 HP with thermal overload relay, Push Buttons, Single Phase Preventer and Switches etc complete as required. including supplying laying and fixing water proof PVC insulated flat submersible cable 3x10 sqmm with end termination with its accessories. complete in all respect
Carrying out Electrical logging of Borewell before lowering of pipe for analysiing of water quality including Electrical logging report, calculation etc.
3
-
-
... More
A. WATER TREATMENT PLANT
i) Providing and fixing vertical/ multi-stage inline centrifugal raw water filter feed pumps mounting on a foundation with CI volute and SS impellar and with stainless steel shaft, mechanical seal and chrome steel shaft sleeve, connected to a TEFC induction motor suitable for 400/440 volts,1500 RPM, 3 phase 50 cycles A.C. supply having IP 55 protection enclosure. complete with base frame, vibration eliminating pads, nuts and bolts etc. ( Necessary RCC foundations as per requirement and as per instructions shall be provided by the agency )
320 KLD
Dual Media Filter
DUAL MEDIA FILTER IN MS CONSTRUCTION
SIZE 1000x1500 mm, FLOW-15 M3/Hr [OUTPUT
- 320 KLD], COMPLETE WITH INTERNALS,
FRONTALS & MEDIA
1
-
-
... More
Activated Carbon Filter
ACTIVATED CARBON FILTER IN MS
CONSTRUCTION SIZE 1000x1500 mm, FLOW
-15 M3/Hr [320 KLD] COMPLETE WITH
INTERNALS, FRONTALS & MEDIA
1
-
-
... More
Raw Water Pump
CI RAW WATER PUMP 15 M3/Hr FOR FILTERS
1
-
-
... More
Water Softening Plant
WATER SOFTENING PLANT IN MS
CONSTRUCTION SIZE 1200X2500 mm , FLOW
– 10 M3/HR WITH 1750 LTRS RESIN [OBR 320
M3 AT 300 PPM HARDNESS]
1
-
-
... More
Raw Water Pump
1
-
-
... More
Installation Charge
1
-
-
... More
Dual Media Filter
DUAL MEDIA FILTER IN MS CONSTRUCTION
SIZE 800x1500 mm, FLOW-10 M3/Hr [180 KLD]
1
-
-
... More
Activated Carbon Filter
ACTIVATED CARBON FILTER IN MS
CONSTRUCTION SIZE 800x1500 mm, FLOW
-10 M3/Hr [180 KLD]
1
-
-
... More
Raw Water Pump
CI RAW WATER PUMP 10 M3/Hr FOR FILTERS
1
-
-
... More
Water Softening Plant
WATER SOFTENING PLANT IN MS
CONSTRUCTION SIZE 1000X2500 mm , FLOW
– 10 M3/HR WITH 1200 LTRS RESIN [OBR 180
M3 AT 300 PPM HARDNESS]
1
-
-
... More
Raw Water Pump
1
-
-
... More
Installation Charge
1
-
-
... More
EXTERNAL WATER SUPPLY( for use of recycling of
STP treated water for horticulture) Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces ifrequired will be paid separately):
a) 100 mm diameter
Class I
8
-
-
... More
a) 150 mm diameter
Class I
6
-
-
... More
Providing and fixing garden hydrant self rotary with spray arm with 20 mm outlet complete with bolts,nuts and rubber insertion etc. and control valve,adopter complete in all respect as per approved make and model by Engineer-incharge
90
-
-
... More
Single Bore Rain Water Harvesting Constructing Desilting tank for rain water harvesting with brick work in cement mortar 1:4 (1 cement and 4 coarse sand), baffle walls in brick masonary in 1 : 4 (1 cement : 4 coarse sand), RCC slab 1:1.5:3 (1 cement, 1.5 coarse sand, 3 graded stone aggregate 20 mm. nominal size). Providing and laying coarse sand in 500 mm thick layer at the bottom of tank, 600x600x75 mm RCC deflector, inlet, outlet and over flow arrangements. The rates includes all necessary excavation in all kind of soils, refilling and disposal of surplus earth with in the site or away from site as directed with out any extra cost including centering,shuttring etc.complete with required nos. heavy duty SFRC type MH covers and frames as per IS : 12592 and all other assessories as per the drawing.Size: 2500 x 2000 x 2000 mm effective depth (Total depth = 3.10 meter)
15
-
-
... More
Construction of Ground water recharge pit of 2500x2500 mm dia & 2000 mm effective depth (Total depth = 3.10 meter) including providing all material, labour, T&P etc including excavation in all kind of soil and disposal of earth as directed, including centering, shuttring etc to complete the work as per following details :-Construction of brick masonry recharge pit of above size by 1:4 cement coarse sand mortar and necessary foundation by 1:4:8 cement concrete.
RCC slab (1:1.5:3) at top of min 150 thick with 2 nos 560 mm dia heavy duty SFRC MH frame and cover as per IS : 12592.
Providing 3 layers of filter media comprises of 500 mm thick 50-150 mm boulders, 500 mm thick 5-10 mm gravel & 500 mm thick coarse sand at the bottom of pit below effective depth. All three layers shall be separated by MS wire mesh.
Drilling of recharge bore well of about 250 to 300 mm dia. by manual means / rig machine upto a depth till 5 meter above highest water table.
Providing & lowering of 160 mm outer dia PVC tubewell casing / slotted pipe (6 kg/sq.cm) with top socket & plug.
tubewell accessories as required.
Filling of 1.6 - 4.8 mm dia. pea gravel allround tubewell.
Masonry intake screen channel with MS screen of 20 mm opening size, 600 x 600 mm RCC deflector and providing overflow to outer drain.
15
-
-
... More
Constructing Desilting tank for rain water harvesting with brick work in cement mortar 1:4 (1 cement and 4 coarse sand), baffle walls in brick masonary in 1 : 4 (1 cement : 4 coarse sand), RCC slab 1:1.5:3 (1 cement, 1.5 coarse sand, 3 graded stone aggregate 20 mm. nominal size). Providing and laying coarse sand in 500 mm thick layer at the bottom of tank, 600x600x75 mm RCC deflector, inlet, outlet and over flow arrangements. The rates includes all necessary excavation in all kind of soils, refilling and disposal of surplus earth with in the site or away from site as directed with out any extra cost including centering,shuttring etc.complete with required nos. heavy duty SFRC type MH covers and frames as per IS : 12592 and all other assessories as per the drawing.
Size: 2500 x 2000 x 2000 mm effective depth (Total depth = 3.10 meter)
12
-
-
... More
Construction of Ground water recharge pit of 2500x2500 mm dia & 2000 mm effective depth (Total depth = 3.10 meter) including providing all material, labour, T&P etc including excavation in all kind of soil and disposal of earth as directed, including centering, shuttring etc to complete the work as per following details :-
Construction of brick masonry recharge pit of above size by 1:4 cement coarse sand mortar and necessary foundation by 1:4:8 cement concrete.RCC slab (1:1.5:3) at top of min 150 thick with 2 nos 560 mm dia heavy duty SFRC MH frame and cover as per IS : 12592.Providing 3 layers of filter media comprises of 500 mm thick 50-150 mm boulders, 500 mm thick 5-10 mm gravel & 500 mm thick coarse sand at the bottom of pit below effective depth. All three layers shall be separated by MS wire mesh.Providing 3 layers of filter media comprises of 500 mm thick 50-150 mm boulders, 500 mm thick 5-10 mm gravel & 500 mm thick coarse sand at the bottom of pit below effective depth. All three layers shall be separated by MS wire mesh.Drilling of recharge bore well of about 250 to 300 mm dia. by manual means / rig machine upto a depth till 5 meter above highest water table.Providing & lowering of 160 mm outer dia PVC tubewell casing / slotted pipe (6 kg/sq.cm) with top socket & plug.tubewell accessories as required.Filling of 1.6 - 4.8 mm dia. pea gravel allround tubewell.Masonry intake screen channel with MS screen of 20 mm opening size, 600 x 600 mm RCC deflector and providing overflow to outer drain.
12
-
-
... More
FIRE FIGHTING
Supplying, installing, testing and commissioning of electric driven fire pump suitable for automatic operation consisting of the following (as per CPWD specification Part V-1985 for Fire Fighting and its amendments).
Fire pump with cast iron impeller horizontal split casing centrifugal suction type multistage having a capacity of 2850 ltrs/minute against a total head of 100 meters so as to ensure a minimum pressure of 3.5 kg per square cm. at the highest and farthest outlet at the specified flow complete with necessary strainer on suction side and pressure gauge on the delivery side including by pass arrangement for periodical testing of the working of the pumping set with 50mm dia G.I. pipe upto 5mtr. length & control valve. The pump shall be provided with mechanical seals.
Squirrel cage type TEFC motor suitable for operation on 415V, 3 phases 50 Hz. system of 75 HP for the above pump with synchronous speed of 1500 RPM and flexible coupling with the pump motor should conform to IS: 325-1978.
Common bed plate fabricated from mild steel channel or cast iron type.
Suitable cement concrete pump foundation & vibration damping arrangement with cushy foot mounting as required. All coupling of pump and motor should be covered with safety guard.
1
-
-
... More
Supplying, installing, testing and commissioning of diesel engine driven fire pump suitable for automatic operation consisting of the following (as per specifications.)
Horizontal centrifugal type , fire pump with cast iron impeller complete for delivery of 2850ltrs/minute at a total head of 100 meters so as to ensure a minimum pressure of 3.5 kg per sq.cm. at the highest & farthest outlet at the specified flow, complete with necessary strainer on suction side and pressure gauge on the delivery side etc. including by pass arrangement for periodical testing of the working of the pump set as required. The pump shall be provided with mechanical seals.
-
-
-
... More
Water cooled cold starting type multi cylinder 4 stroke diesel engine, developing suitable minimum BHP at 1500 RPM for the above pump set with automatic starting mechanism, cooling system with radiator cool engine, maintenance free batteries, battery charger unit, flexible coupling with the pump, fuel day tank with O/L level indicator. The tank should be cylinderical and horizontally fitted capacity 200 litres. Fuel piping and pump and vibration damping arrangement by cushy foot mounting as required complete in all respects. Common bed plate fabricated from mild steel channel or cast iron type.
Suitable cement concrete pump foundation & vibration damping arrangement with cushy foot mounting as required.
Exhaust pipe with thermal insulation with 50mm thick Glass wool insulation and aluminium cladding 24 SWG wire around upto external wall out side the pump room upto required level of height as directed by the engineer incharge, complete in all respects.
All coupling of pump and motor should be covered with safety guard.
1
-
-
... More
Supplying, installation, testing and commissioning of electric motor driven automatic pressurization pump set consisting of the following (as per specification) Centrifugal pump of 180 LPM capacity capable of building up pressure lost in any leakage in the system against a total head of 100m approx. complete with necessary strainer on suction side and pressure gauge on delivery side etc. including by-pass arrangement for testing of the working of the pumping set and with mechanical seals as required .
Squirrel cage A.C. induction motor suitable for operation on 415 V, 3 phase 50 Hz. A.C. supply and of minimum 15 HP for the above pump with flexible coupling as per specification and conforming to IS: 325.
Common bed plate fabricated of mild steel channel or cast iron type. Suitable cement concrete pump foundation with vibration damping arrangement with anti-vibration pad mounting as required. All couplings of pump & motors should be covered with safety Guard.
1
-
-
... More
Fabricating, supplying, erection, testing and commissioning of cubical type floor mounted control panel complete with suitable relays, contactors, indicating lamps, fuses, instrument isolator, automatic star delta type motor starter conforming to IS 1822 and auxiliary switch including connections complete as required for 1 nos. main pumps (one for wet riser and spare space for sprinkler pump and one diesel driven stand by) and 1 no. jockey pump and one spare space for jockey pump as per CPWD specification Part V-1985 and its amendments and Local Fire Department requirements as detailed below:-
Incoming
Switch 600A 50KA MCCB TPN -1 No.
Voltmeter (0-500)V -1 No.
V.S.S. -1 No.
Indication Light -3 Nos.
Protection Fuse and Base -3 Nos.
Outgoing Main Pump 2 Sets 75 HP S/D Starter (for each pump) 250A TP SFU with 35KA MCCB -1 No.
Contactor, ML -4,90/110A -2 Nos.
Contactor, ML -3, 90/110A -1 No.
O/L Relay -1 No. Timer 0-60sec -1 No. Ammeter (0-200) A -1 No. A.S.S. -3 Nos. CONTINUED.......
1
-
-
... More
Current Transformer 200/5A -3 Nos.
Indication Light -3 Nos.
Push Button - 1 set
Protection Fuses -3 Nos.
Auto/Manual S.S. -1 No. Control Fuse 6A -1 No. Single phase preventer -1 No. Water level controller -1 No. Diesel pump
MCB 16A D.P. - 1 NO.
Voltmeter DC - 1 NO.
Ammeter DC - 1 NO.
Indication light - 5 NO.
Push Button - 1 SET. Hooter 24V - 1 NO.
AMF Logic - 1 SET. Lock out Timer - 1 NO.
Inter Locking Relay - 1 SET. Water level controller - 1 NO.
Low Fuel level indicator - 1 NO. Jockey Pump 1 set 15 HP S/D Starters (for each Pump) 63A TP SFU with 35KA MCCB - 1 NO.
Contactor 32 A ML-1.5 - 2 NOS.
Contactor 32 A ML-1.0 - 1 NO. Cont..................
-
-
-
... More
O/L Relay 20-333 A MN-5 - 1 NO. Timer 0-60sec - 1 NO. Ammeter 0-50 A - 1 NO. A.S.S. - 1 NO. Current Transformer 50/5A - 3 NOS.
Indication light - 3 NOS.
Push button - 1 SET. Protection Fuses - 3 NOS. Control Fuses 6A - 1 NO. Auto/Manual S.S. - 1 NO. Auxiliary Contractor - 1 NO. Single phase preventer - 1 NO. Water level controller - 1 NO. Terrace Pump LUBI make end suction Centrifugal monobloc Pump ,CI Impeller , three phase , CI casing , with mechanical seal, model LBI 33, sucxdel 65x50, 35 mtr head 900 LPM
2
-
-
... More
LUBI make end suction Centrifugal monobloc Pump ,CI Impeller , three phase , CI casing , with mechanical seal, model LBI 33, sucxdel 65x50, 35 mtr head 450 LPM
9
-
-
... More
Providing ,erection,Testing & Commissioning of Pressure Switch (MAKE:INDFOSS)
24
-
-
... More
Supplying and laying the PVC insulated and sheathed armoured cables of 1.1 K.V. aluminum conductor including supplying and making end termination with brass compression glands.
120 sq.mm x 3.5 core
160
-
-
... More
25 sq.mm x 3.5 core
200
-
-
... More
Earthing with Copper earth plate 600mm x 600mm x 6mm thick including accessories and providing masonry enclousure with cover plate having locking arrangement and watering pipe etc. (including charcoal or coke and salt) complete as required and as per I.E. rules / specifications.
4
-
-
... More
Providing and fixing 25mm x 5mm Copper Strip. in 40mm dia GI pipe from earth electrode as required.
120
-
-
... More
Providing and fixing 25mmx5mm Copper Strip on surface or in recess for earth connection etc. as required.
120
-
-
... More
Providing and fixing 8swg dia Copper wire on surface or recess for loop earthing as required.
400
-
-
... More
Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc.complete with all fittings (butt welded) viz flanges, bends, tees, elbows, reducers etc including excavation (upto 1.5 m Deep), back filling and removal of surplus soil & providing anti corrosive treatment(coating and wrapping) as per IS:10221 with 4 mm thick tape complete as reqd. (MAKE:TATA/JINDAL/NEZONE)
200 mm dia
1750
-
-
... More
150 mm dia
850
-
-
... More
100 mm dia
400
-
-
... More
80 mm dia
350
-
-
... More
Providing, fixing, welded joints and testing of heavy class M.S. ERW black pipes as per relevant IS 1239/3589 with special accessories tees, elbows, flanged joints, rubber insertion, nuts, bolts, washers or welded joint with flange joints on bends, including fixing the pipe with suitable flat iron strip clamps/brackets structural members dash fastner,civil breakage,making good the same etc. painting with a primer coat and two coats of postal red enamel etc. complete as required.
200 mm dia 6mm thickness
120
-
-
... More
150 mm dia 5.4mm thickness
1200
-
-
... More
100 mm dia 5.4mm thickness
1575
-
-
... More
80 mm dia 4.85mm thickness
1100
-
-
... More
65 mm dia 4.50mm thickness
800
-
-
... More
50 mm dia 4.50mm thickness
700
-
-
... More
40 mm dia 4.05mm thickness
675
-
-
... More
32 mm dia 4.05mm thickness
600
-
-
... More
25 mm dia 4.04mm thickness
6500
-
-
... More
Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE)
144
-
-
... More
Providing controlled percolating (C.P.) hose ISI Marked (IS:8423) 63 mm dia X 15 M long complete with instantaneous type Gun Metal 63 mm dia ISI Marked male & female couplings (IS:903) bound & riveted to hose pipes with copper rivets and copper wire complete as required.
(MAKE: NIRMAL RUBBER/NEWAGE)
250
-
-
... More
Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884.
144
-
-
... More
Providing & Fixing of Gun Metal 63 mm dia Short Branch Pipe with 20 mm dia nozzle, ISI marked (IS:903) complete as required.
(Make: ESSEL/WINCO/NEWAGE).
144
-
-
... More
Providing & Fixing of Gun Metal fire Brigade Connection (inlet collection head) consisting of 63mm instantaneous type male coupling with built in check valves and 150 mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904-1983 complete as reqd.
MAKE: ESSEL/WINCO/NEWAGE 02 way
15
-
-
... More
04 way
5
-
-
... More
Providing and fixing set of "Siamese" quadruplet instantaneous fire brigade inlet connections comprising of two gunmetal instantaneous male inlet coupling 63mm dia with plug and cap, chain bends, tees etc. for inlet to the static tank.
2
-
-
... More
Providing and fixing weather proof standard hose cabinet (900mm x 750 mm x 400 mm) out door type suitable for accommodating yard hydrants made of 1.5mm thick M.S. sheet having central opening glazed door including necessary locking arrangements, painting one coat of primer and two coats of postal red enamel paint and housing 2 Nos. canvas hose pipe and branch pipe as required. (The cabinet shall be floor mounted on suitable raised platform). The shutters are to be lockable type. The words “Fire Hose Cabinet” to be painted on the box.
20
-
-
... More
Providing and fixing Fire hose cabinet glazed door shutter and frame with hold fasts ( frame fabricated from 40 x 40 x 5mm and shutter from 35x35x5mm M.S. angle) 1500 mm high x 1000 mm wide with locking arrangement, 4mm thick glass with M.S. flats including all accessories, painting with one coat of steel primer and two coats of postal red enamel paint. The words “Fire Hose Cabinet” to be painted on the box.
56
-
-
... More
Supplying and installing cylindrical type air vessel of 300mm dia, 1.5m high fabricated out of 8mm thick MS plate suitable for 7kg/sqcm. working pressure complete with 25mm gunmetal air release valve, safety valve, pressure gauge etc as required. The air vessel shall be continuous welded construction and painted with two coats of Postal red enamel outside over a coat of primer and Epoxy paint inside. (One for Main Wet Riser System and Second for Sprinklers System.)
16
-
-
... More
Supplying and installation of Fire pressure vessel of 450mm dia and 1m high fabricated from 8-10mm thick M.S. plate suitable for 10kg/sqcm. working pressure with accessories, painted with two coats of Postal red enamel outside over a coat of primer and epoxy paint inside for automatic operation of pump. )One for fire Main Wet Riser System and Second for Sprinklers System.)
8
-
-
... More
Supplying & Fixing,cast iron body Butterfly Valves with matching flanges, rubber insertion, nuts, bolts and washer etc (IS:13095) of following size complete as reqd.
(MAKE:KOLEY/KALPANA/AUDCO)
80 mm dia
90
-
-
... More
100 mm dia
80
-
-
... More
150 mm dia
24
-
-
... More
200 mm dia
12
-
-
... More
Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd.
(Make:Koley/Kalpana/Audco)
80 mm dia
10
-
-
... More
100 mm dia
45
-
-
... More
150 mm dia
16
-
-
... More
Providing, erection testing, Commissioning of Cast Iron Foot Valve/Stainer confirming to IS:4038/1538 complete with flanges, nuts, bolts and washer etc as required 150 mm dia
2
-
-
... More
Providing and fixing draining arrangement to the vertical wet risers and sprinklers at different floors.
Providing and fixing 50 mm dia gunmetal full way valve heavy quality tested to 21kg/cm2
128
-
-
... More
Supplying, Installation,Testing & Commissioning of 15 mm dia quartzoid Bulb Type G.M. Sprinkler Head sutable to operate at 68* C complete as reqd.(UL/FM/LPC listed/Approved)
(Make : HD Fire / TYCO)
Pendent type - 680C
5850
-
-
... More
Providing and fixing flow switch of approved make for the Sprinkler annunciation system for the sprinkler system.
100 mm
112
-
-
... More
Providing and fixing 2 core x 1.5 sq.mm copper conductor PVC sheathed insulated armoured cable.
2800
-
-
... More
Providing,erection testing & commissioning of pressure gauge 100 mm dia (0-10Kg/cm2)
120
-
-
... More
Providing and fixing 32 zone Annunciation panel for the sprinkler system on A.C. supply with stand by battery complete in all respects.
8
-
-
... More
Supplying, fixing, testing and commissioning, installation control valves comprising of :
1 No. alarm motor & gong (hydraulically operated)
1 No. main stop valve
1 No. alarm valve.
Pressure gauges and drain pipe.
150mm dia
8
-
-
... More
Supply, Installation, Fixing of ABC stored Pressure Fire Extinguisher with built – In Pressure Gauge to know the Ready ness of the Extinguisher Squeeze Grip Handle as per IS:13849 with ISI mark.
(10 kg capacity)
BRAND : FIRESTOP / FIREND / FIRE SHIELD
48
-
-
... More
Supply, Installation, Fixing of ABC Stored Pressure Fire Extinguisher with built – In pressure Gauge to know the Ready ness of the Extinguisher Squeeze Grip Handle As per IS:13849 with ISI mark
(05 kg capacity) BRAND : FIRESTOP / FIREND / FIRE SHIELD
20
-
-
... More
Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark.(4.5 LITERS) BRAND: FIRESTOP / FIREND / FIRESHIELD
500
-
-
... More
Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark. (Extinguisher will be TROLLEY MOUNTED)(6.5 KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD
375
-
-
... More
Supply, Installation, Fixing of MECHANICAL FOAM (AFFF) Fire Extinguisher confirming to IS: 10204 with ISI Mark and CO2 Cartridge will be confirming to IS: 4947 with ISI mark, (AFFF) will be confirming to IS: 4989 with ISI Mark.(9 LTRS) BRAND : FIRESTOP / FIREND / FIRE SHIELD
16
-
-
... More
Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (Extinguisher will be TROLLEY MOUNTED).(50 KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD
8
-
-
... More
Providing and fixing self glowing Exit sign board size 350x200mm single side painted made of luminescent safely, rigid sheet in standard colour, phot luminescent sheet made of crystals consisting mainly sulphide in protective glass like sheet green and yellow crystal luminescent (glass in dark) by action of light.
120
-
-
... More
Providing 12 mm thick rubber mat 1000 mm wide of required length as required for med.voltage.
12
-
-
... More
Providing and fixing M.S. floated cable tray size 300x50 mm with M.S. suspenders, anchors etc. fixed in slab/wall including cutting and making good the wall/slab whereever required and painting with 3 coats of enamel paint over a coat of primer complete in all respects.
200
-
-
... More
Providing and fixing fire man axe as required with test certificate of 20000 volts.
60
-
-
... More
Constructing masonry chamber 90x90x100cm, inside 75 class designation brick work in cement mortar 1:5 (1 cement:5 fine sand) for sluice valve, with C.I. Surface box 100 mm. Top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement:5 fine sand:10 graded stone aggregate 50 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement:3 coarse sand) 12 mm thick finished with a floating neat cement complete as per standard design.
With F.P.S. bricks
32
-
-
... More
Providing and fixing M.S. structure work fabricated from standard sections E.g. MS squarebars, flots, rounds, angles, channels including cutting to size drilling, welding, fixing & welding to insert plates in RCC structure members as directed by site incharge, including cutting and making good the walls, floors & RCC roof (for pipe supports, clamps, M.S. ladders & manholes for tank covers etc) including painting will two or more coats of enamel joint of approved colour over a coat of approved steel primer as for drawings & direction of the site incharge.
6000
-
-
... More
Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes
2000 Lt capacity
Sintex make
16
-
-
... More
1000 litre capacity Sintex make
8
-
-
... More
ELECTRICAL WORKS (INTENAL AND EXTERNAL-)
Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose etc. complete Short point up to 3.00 metre. length.
6756
-
-
... More
Medium point up to 6.00 metre. Length.
2750
-
-
... More
Long point up to 10.00 metre. Length.
2250
-
-
... More
Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system
secondry point
With 3 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
3500
-
-
... More
Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.
With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
2012
-
-
... More
With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
2255
-
-
... More
With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
3630
-
-
... More
Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system.
With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
3305
-
-
... More
Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan.
4480
-
-
... More
Wiring for twin control light point with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 amp flush type 2 way switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete Short point up to 3.00 metre. length.
25
-
-
... More
Medium point up to 6.00 metre. Length.
129
-
-
... More
Long point up to 10.00 metre. Length.
104
-
-
... More
Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia rigid ISI marked hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose etc. complete
Short point up to 3.00 metre length.
1250
-
-
... More
Medium point up to 6.00 metre length
6500
-
-
... More
Long point up to 10.00 metre length
5565
-
-
... More
Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed ISI marked hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) wiring system.
secondry point
With 3 x 1.5 sq. mm. cable in 20 mm dia. ISI marked hot dip galvanised pipe
6500
-
-
... More
Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts( Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in ISI marked hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) including earth continuity in surface/ recessed conduit wiring system.
With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. cable in 20 mm. dia. ISI marked hot dip galvanised pipe
34619
-
-
... More
With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. rigid ISI marked hot dip galvanised pipe .
21982
-
-
... More
With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. rigid ISI marked hot dip galvanised pipe .
600
-
-
... More
Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed ISI marked hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) wiring system. With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. ISI marked hot dip galvanised pipe .
3559
-
-
... More
With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in 40 mm. dia. ISI marked hot dip galvanised pipe .
2473
-
-
... More
Supply and fixing 32 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:
4500
-
-
... More
Supplying and fixing 25 mm dia ISI marked Steel conduit pipe (AKG or equivalent as approved by the Deptt.) in recessed including cutting the wall and making good the same to its original architectural finish:
4677
-
-
... More
Supplying and fixing 32 mm dia ISI marked Steel conduit pipe (AKG or equivalent as approved by the Deptt.) in recessed including cutting the wall and making good the same to its original architectural finish:
2426
-
-
... More
Supplying and fixing 38 mm dia ISI marked Steel conduit pipe (AKG or equivalent as approved by the Deptt.) in recessed including cutting the wall and making good the same to its original architectural finish:
1725
-
-
... More
Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts ( Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in existing surface conduit wiring system including connection as required.
With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. copper conductor cable
55735
-
-
... More
With 4 x 4 sq. mm. + earth continuity with 2x2.5 sq. mm. core copper conductor cable
6558
-
-
... More
Supplying and fixing 18 S.W.G sheet steel metal boxes of the following sizes in surface Wiring system with suitable size of 3 mm thickness phenolic laminated sheet cover on the front face of the boxes including painting etc. as required and specified by the department. 100 mm x 150 mm x 60 mm deep (Nominal size
1031
-
-
... More
Supplying and fixing of Call bell ( Buzzer ) including 6 amp capacity flush type bell push switch including connection as approved by the Deptt.)as required.
161
-
-
... More
Supplying and fixing of 40 mm dia hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) for street light water tight bracket including bending to shape and Wiring with 1.5 sq. mm size aluminium weather proof PVC cable etc.. as required.
3561
-
-
... More
Installation, testing and commissioning of ceiling fan including the regulator /down rod of standard size (Up to 300 mm ) length including connection as approved by the Deptt.)as required.
3561
-
-
... More
Supplying extra down rod of 20 cm long G.I. pipe 20 mm dia heavy gauge including painting etc. as required
600
-
-
... More
Supplying extra down rod of 30 cm long G.I. pipe 20 mm dia heavy gauge including painting etc. as required
400
-
-
... More
Numbering of ceiling fans/exhaust fans as required
2866
-
-
... More
Installation of Exhaust fan up to 450 mm sweep in the existing opening including making the hole to suit the size of the above fan, making good the damages, testing, commissioning etc. as required complete
450
-
-
... More
Installation of Exhaust fan up to 510 mm sweep in the existing opening including making the hole to suit the size of the above fan, making good the damages, testing, commissioning etc. as required complete
159
-
-
... More
Extra for fixing the Louvers/Shutters complete with frame for exhaust fans of all sizes
609
-
-
... More
Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 12 way SPN single door
28
-
-
... More
Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof reversible Double door IP-43 double door surface mounting horizontal TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 6 way TPN (8+18) double door
157
-
-
... More
8 way TPN (8+24) double door
150
-
-
... More
12 way TPN (8+36) double door
59
-
-
... More
Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting vertical TPN MCB DB incorporated with bas-bar 125A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make)
8 way TPN (8+24) double door
20
-
-
... More
Supplying with fitting and fixing MCCB income and MCB outgoing sheet steel, phosphatised, powder painted double door IP-43 surface mounting vertical TPN MCB DB incorporated with bas-bar up to 250A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 8way TPN (4+18) double door
69
-
-
... More
Supplying with fitting and fixing SPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
B Series
(Schneider MG, legrand, Hager make)
6 to 32A
1132
-
-
... More
Supplying with fitting and fixing SPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
B Series
(Schneider MG, legrand, Hager make)
40A
26
-
-
... More
C Series
(ABB, Schneider MG, legrand, Hager make)
6 to 32A
3057
-
-
... More
Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
B Series (Schneider MG, legrand, Hager make)
40A
157
-
-
... More
Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
C Series (ABB, Schneider MG, legrand, Hager make)
63A
121
-
-
... More
Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
30mA sensitivity DP RCCB
(ABB, Schneider MG, legrand, Hager make)
25A
26
-
-
... More
Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz 4P RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
40A
152
-
-
... More
Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz 4P RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
63A
87
-
-
... More
Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
63A
2
-
-
... More
Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
100A
2
-
-
... More
Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
125A
2
-
-
... More
Supply, installation & testing of G.I. Plate earth station with 600 mmx600 mmx6 mm heavy duty G.I. earth plate with necessary 40 mm dia. G.I. watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm hinged cover C.I. cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .
114
-
-
... More
Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx3 mm copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .
114
-
-
... More
Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.
510
-
-
... More
Supplying & laying of 8 SWG Copper earth drawn through 15 mm dia. Medium quality G.I. pipe from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.
271
-
-
... More
Supplying & laying of following size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.
315
-
-
... More
Supplying & laying of following size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.
315
-
-
... More
Supply, fitting & fixing 20 mmx5 mm G.I. strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of G.I. Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode G.I. strips and Lightning Arrestor etc. as specified and directed by the deptt.
271
-
-
... More
Supply, fitting & fixing 20 mmx5 mm G.I. strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of G.I. Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode G.I. strips and Lightning Arrestor etc. as specified and directed by the deptt.
265
-
-
... More
Supply, fitting & fixing 20 mmx3 mm Copper strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of Brass Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode copper strips and Lightning Arrestor etc. as specified and directed by the deptt.
271
-
-
... More
Supply, fitting & fixing of Lighting Finial Arrestor made of 25 mm dia 300 mm long solid Copper tube having 85 mm dia. single prong at top and 3 mm thick base plate at bottom complete with fitting & fixing with Brass nuts & bolts on roof, RCC slab, top of column etc. as specified and directed by the deptt.
265
-
-
... More
Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 3 & 1/2 Core A2XFY 35.00 Sq. mm.3 & 1/2 Core armoured U.G. cable
510
-
-
... More
50.00 Sq. mm.3 & 1/2 Core armoured U.G. cable
1705
-
-
... More
Supply and laying of following size gas injected physical polyethylene foam insulation with laminated Al tape and Al braid, jelly flooded PVC black jacketed industrial co-axial cable armoured cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. . (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . RG 6 armoured
4780
-
-
... More
Supply and laying of following size armoured telephone cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. . (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) 20 pair
200
-
-
... More
Supply and laying of following size armoured telephone cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. . (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) 50 pair
150
-
-
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required
2 Pair
9828
-
-
... More
Supplying and installing following size o perforated Hot Dipped Galvanised Iron Cable Tray"Tee"(galvanisation not less than 50 microns) with perfection not more than 17.5%,in convinient sections,joined with connectors,suspended from ceiling with G.I suspenders including GI bolts and nuts,etc. as required
100mm width x50mm depth x 1.6mm thickness
300
-
-
... More
150mm width x50mm depth x 1.6mm thickness
200
-
-
... More
300mm width x50mm depth x 1.6mm thickness
150
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required.
3143
-
-
... More
Supplying and fixing 20 amps, 240 volts, SPN Industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps 'C' series, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
362
-
-
... More
Supplying installation testing and commissioning Exclusive Surface DL with LG7 compliant, LED luminaire with direct light output. Round LED Downlight Luminaire luminous flux 1100lm,Connected load 10W similar to.Trilux Cat Ref. ADRASTIA D LED 1000-840 ETor equivalent.
672
-
-
... More
Supplying installation testing and commissioning 20W LED Batten 4ft. Surface Mounted with Efficacy of 110Lm/W. Similar to .Trilux Cat Ref. TSmart Linea F 2200 20W or equivalent.
241
-
-
... More
LED Batten Surface Mounted connected load 20Watt, similar to Trilux Cat Ref. LED Batten D OTA LED 1700-830 ETor equivalent.
99
-
-
... More
Supplying installation testing and commissioning Exclusive wall bracket LED with compliant, LED luminaire with direct light output. Round LED Downlight Luminaire luminous flux 1000lm,Connected load 10W..Trilux or equivalent.
605
-
-
... More
SITC Recessed LED luminaire with translucent PMMA cover.Harmonious light effect due to homogeneously illuminated light emission. similar to Trilux Cat Ref. Enterio IND M73 OA LED 3600 857 ET
4185
-
-
... More
Supplying Supply, Installation, Testing & Commissioning of 28 W Super bright LED as light source, which is stable, long life and no UV & IR emission similar to Trilux Cat Ref. Troffer X Panel 28W or equivalent
714
-
-
... More
Supplying of Luminaire luminous flux 1200lmConnected load 12W. Luminous efficiency of luminaire 100 lm/W.similar to Trilux Cat Ref.Gleam - IND G3 1200 - 840 ET (12W) or equivalent.
582
-
-
... More
Supplying of 6W LED Batten 2ft. Surface Mounted with Efficacy of 100Lm/W.similar to Trilux Cat Ref. TSmart Linea F 600 6W or equivalent.
672
-
-
... More
Supplying of wall/ceiling mounting maintained type emergency lights similar to Pierlite catalq number CPDI0111os2EM1 with one hour battery backup chargeable sealed maintenance free Ni-Cd battery IP-65 Protection category housing incorporating polycarbinate lens, abs/pc alloy base and metal grey tray,automatic shut down of the functioning of circuit and shifting to battery made ie operating on AC but switching over to DC in case of power failure complete with initial charge of battery as required.
180
-
-
... More
Supplying of Weather proof battens with IP 65 ratings for industrial applications .Extruded Polycarbonate Housing with Opal Polycarbonate Vapour Proof Diffuser. Luminous flux 1800 lm/3600 lm, connected load 18 W/ 36 W,similar to Trilux Cat Ref.TRL OTA 1800-860 ET/ TRL OTA 3600-860 ET or equivalent.
2584
-
-
... More
Supplying of 20W LED Batten 4ft. Surface Mounted with Efficacy of 110Lm/W. AL Extrusion Body for better heat management & longer life 50000 hrs. Uniform Distribution. HE diffuser & aesthetic end caps..Colour temperature 5700K and Colour rendering index Ra › 80 , IP20.similar to Trilux Cat Ref. TSmart Linea F 2200 20W or equivalent.
2319
-
-
... More
Supplying of Weather proof battens with ratings ..Extruded Polycarbonate Housing with Opal Polycarbonate Vapour Proof Diffuser. Luminous flux 1800 lm connected load 18 W,similar to Trilux Cat Ref.TRL OTA 1800-860 ET or equivalent.
311
-
-
... More
Supplying of Weather proof battens with Extruded Polycarbonate Housing with Opal Polycarbonate Vapour Proof Diffuser. Luminous flux 3600 lm, connected load 36 W, similar to Trilux Cat Ref. TRL OTA 3600-860 ET or equivalent.
1146
-
-
... More
SITC Surface LED luminaire with translucent PMMA cover.Harmonious light effect due to homogeneously illuminated light emission. similar to Trilux Cat Ref. Enterio IND M73 OA LED 3600 857 ET or equivalent.
36
-
-
... More
Supplying of Round surface-mounted LED luminaire with opal PMMA diffuser. For wall or ceiling mounting surface. similar to Trilux Cat Ref. 74RS WD1 LED1000-840 ET or equivalent.
814
-
-
... More
Supplying of Luminaire luminous flux 1200lmConnected load 12W. similar to Trilux Cat Ref.Gleam - IND G3 1200 - 840 ET (12W) or equivalent.
119
-
-
... More
Supplying of Exclusive Recessed LED luminaire with direct light output similar to Trilux Cat Ref. Gleam - IND G3 800 - 840 ET (8W) or equivalent.
15
-
-
... More
Supplying of 1200mm sweep ceiling fan similar to Havells Cat. Ref. Pacer White/Brown/Ivory or equivalent.
1200 mm sweep
1775
-
-
... More
1400 mm sweep
1745
-
-
... More
Supplying installation testing and commissioning of 450mm sweep wall fan similar to Havells Cat. Ref. Airboll Hi-Speed or equivalent.
609
-
-
... More
Academic block panel
SITC of compartmentalised design, dust tight & vermin proof made out of 14 gauge M.S. sheet, stove powder coated L.T panel complete as required with following incomming & outgoing as per detail below.
INCOMER
1 Nos. 630 AMP FP MCCB
BUSBARS
1 Nos. 800 Amp FP busbars of aluminium alloy as per SLD.
OUTGOING
4 Nos. 160 Amp FP MCCB 3 Nos.250 Amp FP MCCB 4 Nos. 40 Amp FP MCB INSTRUMENTS
1 Nos. 0 to 630 Volt digital voltmeter with Voltmeter Selector Switch & Protective SP MCB (96mm square) 1 No. 0 to 630 Amp digital Ammeter
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp1 Sets auto trip indicating lamp .
2
-
-
... More
Floor Panel
SITC of compartmentalised design, dust tight & vermin proof made out of 14 gauge M.S. sheet, stove powder coated L.T panel complete as required with following incomming & outgoing as per detail below.
INCOMER
1 Nos. 250 AMP FP MCCB
BUSBARS
1 Nos. 300 Amp FP busbars of aluminium alloy as per SLD.
OUTGOING
4 Nos. 160 Amp FP MCCB 4 Nos. 40 Amp FP MCB INSTRUMENTS
1 Nos. 0 to 630 Volt digital voltmeter with Voltmeter Selector Switch & Protective SP MCB (96mm square) 1 No. 0 to 630 Amp digital Ammeter
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .
6
-
-
... More
Teaching hospital panel
Main Electrical panel
SITC of compartmentalised design, dust tight & vermin proof made out of 14 gauge M.S. sheet, stove powder coated L.T panel complete as required with following incomming & outgoing as per detail below.
INCOMER
2 Nos. 2500 AMP FP ACB EDO
1 Nos. 2500 AMP FP ACB EDO B/CBUSBARS
1 Nos. 3200 Amp FP busbars of aluminium alloy as per SLD.OUTGOING
4 Nos. 1600 AMP FP ACB EDO4 Nos. 630 Amp FP ACB EDO2 Nos. 160 Amp FP MCCB 2 Nos. 125 Amp FP MCCB INSTRUMENTS
2 no Multifunction meter for (KW/PF/A/KVA/V)
2 Sets of phase indicating lights (RYB) with protection fuses 2 Sets breaker 'ON' & 'OFF' indicating lamp
2 Sets auto trip indicating lamp .
1
-
-
... More
BUSBARS
1 Nos. 400 Amp FP busbars of aluminium alloy as per SLD.
OUTGOING
5 Nos. 63Amp FP MCB 7 Nos. 100 Amp FP MCB 7 Nos. 160 Amp FP MCB 6 Nos. 160 Amp FP MCCB 1 Nos. 200 Amp FP MCCB INSTRUMENTS
1 no Multifunction meter for (KW/PF/A/KVA/V)
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .
1
-
-
... More
Floor Panel -03
SITC of compartmentalised design, dust tight & vermin proof made out of 14 gauge M.S. sheet, stove powder coated L.T panel complete as required with following incomming & outgoing as per detail below.
INCOMER
1 Nos. 630 A FP MCCB
BUSBARS
1 Nos. 800 Amp FP busbars of aluminium alloy as per SLD
OUTGOING
1 Nos. 315 Amp FP MCCB 1 Nos. 200 Amp FP MCB 6 Nos. 160 Amp FP MCB 6 Nos. 125 Amp FP MCB 4 Nos. 63 Amp FP MCB 4 Nos. 40 Amp FP MCB INSTRUMENTS
1 no Multifunction meter for (KW/PF/A/KVA/V)
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .
3
-
-
... More
Floor Panel-04
SITC of compartmentalised design, dust tight & vermin proof made out of 14 gauge M.S. sheet, stove powder coated L.T panel complete as required with following incomming & outgoing as per detail below.
INCOMER
1 Nos. 315 AMP FP MCCB
BUSBARS
1 Nos. 400 Amp FP busbars of aluminium alloy as per SLD.
OUTGOING
2 Nos. 160Amp FP MCCB 2 Nos. 125 Amp FP MCCB 4 Nos. 40 Amp FP MCB INSTRUMENTS
1 no Multifunction meter for (KW/PF/A/KVA/V)
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .
1
-
-
... More
Floor Panel -01(B)
SITC of compartmentalised design, dust tight & vermin proof made out of 14 gauge M.S. sheet, stove powder coated L.T panel complete as required with following incomming & outgoing as per detail below.
INCOMER
1 Nos. 1600 A FP ACB
BUSBARS
1 Nos. 2000 Amp FP busbars of aluminium alloy as per SLD.
OUTGOING
1 Nos. 1000 Amp FP ACB 5 Nos. 160 Amp FP MCCB 8 Nos. 125 Amp FP MCCB 4 Nos. 63 Amp FP MCB 4 Nos. 40 Amp FP MCB INSTRUMENTS
1 no Multifunction meter for (KW/PF/A/KVA/V)
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .
3
-
-
... More
Floor Panel-04(B)
SITC of compartmentalised design, dust tight & vermin proof made out of 14 gauge M.S. sheet, stove powder coated L.T panel complete as required with following incomming & outgoing as per detail below.
INCOMER
1 Nos. 400 AMP FP MCCBBUSBARS
1 Nos. 500Amp FP busbars of aluminium alloy as per SLD.
OUTGOING
5 Nos. 160Amp FP MCCB 6 Nos. 125 Amp FP MCCB 4 Nos. 40 Amp FP MCB INSTRUMENTS
1 no Multifunction meter for (KW/PF/A/KVA/V)
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .
3
-
-
... More
Floor Panel -01©
SITC of compartmentalised design, dust tight & vermin proof made out of 14 gauge M.S. sheet, stove powder coated L.T panel complete as required with following incomming & outgoing as per detail below.
INCOMER
1 Nos. 1600 A FP ACBBUSBARS
1 Nos. 2000 Amp FP busbars of aluminium alloy as per SLD.
OUTGOING
1 Nos. 1000 Amp FP ACB 8 Nos. 160 Amp FP MCCB 9 Nos. 125 Amp FP MCCB 4 Nos. 63 Amp FP MCB 4 Nos. 40 Amp FP MCB INSTRUMENTS
1 no Multifunction meter for (KW/PF/A/KVA/V)
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .0
3
-
-
... More
Floor Panel-04©
SITC of compartmentalised design, dust tight & vermin proof made out of 14 gauge M.S. sheet, stove powder coated L.T panel complete as required with following incomming & outgoing as per detail below.
INCOMER
1 Nos. 400 AMP FP MCCB
BUSBARS
1 Nos. 500Amp FP busbars of aluminium alloy as per SLD.
OUTGOING
6 Nos. 160Amp FP MCCB 6 Nos. 125 Amp FP MCCB 4 Nos. 40 Amp FP MCB 1 no Multifunction meter for (KW/PF/A/KVA/V)INSTRUMENTS
1 no Multifunction meter for (KW/PF/A/KVA/V)
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .
3
-
-
... More
UPS Panel
INCOMER
1 Nos. 400 AMP FP MCCB
BUSBARS
1 Nos. 500Amp FP busbars of aluminium alloy as per SLD.
OUTGOING
8 Nos. 125 Amp FP MCCB 4 Nos. 40 Amp FP MCB INSTRUMENTS
1 no Multifunction meter for (KW/PF/A/KVA/V)
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .
2
-
-
... More
Animal House Panel
INCOMER
1 Nos. 315 AMP FP MCCB
BUSBARS
1 Nos. 400Amp FP busbars of aluminium alloy as per SLD.
OUTGOING
2 Nos. 125 Amp FP MCCB 4 Nos. 40 Amp FP MCB INSTRUMENTS
1 no Multifunction meter for (KW/PF/A/KVA/V)
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .
1
-
-
... More
Boys Hostel Panel
INCOMER
1 Nos. 315 AMP FP MCCB
BUSBARS
1 Nos. 400Amp FP busbars of aluminium alloy as per SLD.
OUTGOING
2 Nos. 125 Amp FP MCCB 8 Nos. 40 Amp FP MCB INSTRUMENTS
1 no Multifunction meter for (KW/PF/A/KVA/V)
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .
1
-
-
... More
Director Residence Panel
INCOMER
1 Nos. 125 AMP FP MCCB
BUSBARS
1 Nos. 160Amp FP busbars of aluminium alloy as per SLD.
OUTGOING
4 Nos. 40 Amp FP MCB INSTRUMENTS
1 no Multifunction meter for (KW/PF/A/KVA/V)
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .
1
-
-
... More
Girls Hostel Panel
INCOMER
1 Nos. 315 AMP FP MCCB
BUSBARS
1 Nos. 400Amp FP busbars of aluminium alloy as per SLD.OUTGOING
2 Nos. 125 Amp FP MCCB 8 Nos. 40 Amp FP MCB INSTRUMENTS
1 no Multifunction meter for (KW/PF/A/KVA/V)
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .
1
-
-
... More
Incinator Panel
INCOMER
1 Nos. 160 AMP FP MCCB
BUSBARS
1 Nos. 200Amp FP busbars of aluminium alloy as per SLD.OUTGOING
2 Nos. 125 Amp FP MCCB 2 Nos. 40 Amp FP MCB INSTRUMENTS
1 no Multifunction meter for (KW/PF/A/KVA/V)
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .
1
-
-
... More
MORTUARY PANEL
INCOMER
1 Nos. 160 AMP FP MCCB
BUSBARS
1 Nos. 200Amp FP busbars of aluminium alloy as per SLD.
OUTGOING
4 Nos. 32Amp FP MCB 2 Nos. 63 Amp FP MCB INSTRUMENTS
1 no Multifunction meter for (KW/PF/A/KVA/V)
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .
1
-
-
... More
SUPERINTENDENT HOUSE PANEL
INCOMER
1 Nos. 125 AMP FP MCCB
BUSBARS
1 Nos. 160Amp FP busbars of aluminium alloy as per SLD.
OUTGOING
4 Nos. 40 Amp FP MCB INSTRUMENTS
1 no Multifunction meter for (KW/PF/A/KVA/V)
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .
1
-
-
... More
LT PANEL TO RESEDENTIAL
INCOMER
2 Nos. 800 AMP FP ACB
BUSBARS
1 Nos. 1000Amp FP busbars of aluminium alloy as per SLD.
OUTGOING
6 Nos. 200Amp FP MCB 8 Nos. 125Amp FP MCB INSTRUMENTS
1 no Multifunction meter for (KW/PF/A/KVA/V)
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .
2
-
-
... More
TYPE-I STAFF QUARTERS METER PANEL (NO. OF FLATS-23)
INCOMER
1 Nos. 125 AMP FP MCCB
BUSBARS
1 Nos. 160Amp FP busbars of aluminium alloy as per SLD.
OUTGOING
24 Nos. 25 Amp DP MCB 23 no. 1 Phase energy meter in compartment.
INSTRUMENTS
1 no Multifunction meter for (KW/PF/A/KVA/V)
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .
2
-
-
... More
TYPE-II STAFF QUARTERS METER PANEL (NO. OF FLATS-18)
INCOMER
1 Nos. 160 AMP FP MCCB
BUSBARS
1 Nos. 200 Amp FP busbars of aluminium alloy as per SLD.
OUTGOING
19 Nos. 25 Amp FP MCB 19 no. 3 Phase energy meter in compartment.
INSTRUMENTS
1 no Multifunction meter for (KW/PF/A/KVA/V)
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .
1
-
-
... More
TYPE-IV STAFF QUARTERS METER PANEL (NO. OF FLATS-18)
INCOMER
1 Nos. 200 AMP FP MCCB
BUSBARS
1 Nos. 250 Amp FP busbars of aluminium alloy as per SLD.
OUTGOING
19 Nos. 32 Amp FP MCB 19 no. 3 Phase energy meter in compartment.INSTRUMENTS
1 no Multifunction meter for (KW/PF/A/KVA/V)
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .
1
-
-
... More
TYPE-V STAFF QUARTERS METER PANEL (NO. OF FLATS-8)
INCOMER
1 Nos. 200 AMP FP MCCB
BUSBARS
1 Nos. 250 Amp FP busbars of aluminium alloy as per SLD.
OUTGOING
8 Nos. 40 Amp FP MCB 8 no. 3 Phase energy meter in compartment.
INSTRUMENTS
1 no Multifunction meter for (KW/PF/A/KVA/V)
1 Sets of phase indicating lights (RYB) with protection fuses 1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets breaker 'ON' & 'OFF' indicating lamp
1 Sets auto trip indicating lamp .
1
-
-
... More
Lift Work:
Design, manufacture, supply, installation, testing and commissioning of 20 passenger (1360 kg) lift with travel speed 1.0 MPS serving different floors in the lift shaft as per detailed specification/ drawing enclosed and as under: Location Admin building
Capacity & Speed 20 Pax, 1360 kg, Speed 1.00 mps
Drive: Variable Voltage Variable Frequency Drive (Close Loop)
Operation: Microprocessor based Simplex/Duplex Collective Selective with/without Provision of attendant control. Separate Landing Push Button Box for all Landings with scrolling indicator.Stops & Openings
4 Stops 4 Openings. (Same Side)
Floor Designation
G+3Car travel: 12 meter (approx).
Car Enclosure: Stainless Steel Hairline finish Car with Fluorescent Light & Fan as per our standard Design.
Automatic Center Opening Doors in Stainless Steel Hairline Finish
Landing Entrance: Automatic Center Opening Doors in Stainless Steel Hairline Finish
Car sizeAbout 1300 mm wide 2400 mm Deep 2200mm High.
Door OpeningAbout 1000 mm Wide 2000 mm HighElevator wellClear 2350 mm wide X 3000 mm deep Machine roomAbove Shaft.1700 mm Overhead Required : 4800 mm Main supply415 volts, 3 Phase, 50Hz. A.C. SignalsIndicator for all landings, Floor position Indicator for all LandingsSpecial features 1. Double Acting Shoe Brake for Machine.
2. Fireman Control Switch.
3. Infrared Screen
4. Recess for Granite Flooring 5. Battery Operated Emergency Alarm.
6. VFD Display in Car for Direction and position indication.
7. SS Suspended Ceiling (as per TKEI design).
8. Seven Segment Display for Direction & Position Indicators at all Landings.
9. Energy Saving Feature for Landing Indicators.
10.Battery Operated Emergency Light.
11.SS Round Handrails & Half Length Mirror (Rear Side)
12. ARD 13. Over Load & Full Load Bypass
1
-
-
... More
Design, manufacture, supply, installation, testing and commissioning of 26 passenger (1768 kg) lift with travel speed 1.0 MPS serving different floors in the lift shaft as per detailed specification/ drawing enclosed and as under: Location Admin building
Location
Hospital
Capacity & Speed 26 Pax,1768 kg, Speed 1.00 mps
Drive: Variable Voltage ,Variable Frequency Drive (Close Loop)
Operation: Microprocessor based Simplex/Duplex Collective Selective with/without Provision of attendant control. Separate Landing Push Button Box for all Landings with scrolling indicator.
Stops & Openings4 Stops 4 Openings. (Same Side)
Floor DesignationG+3 Car travel: 12 meter (approx).
Car Enclosure : Stainless Steel Hairline finish Car with Fluorescent Light & Fan as per our standard Design.
Car Entrance Automatic Center Opening Doors in Stainless Steel Hairline Finish: Automatic Center Opening Doors in Stainless Steel Hairline Finish
Landing Entrance: Car size Door OpeningAbout 1600 mm wide 2400 mm Deep 2200mm High.About 1000 mm Wide 2000 mm HighElevator wellClear 2750 mm wide X 3100 mm deep Machine room : Above Shaft.
Elevator Pit Depth 1700 mm Overhead Required : 4800 mm Main supplyIndicator for all landings, Floor position Indicator for all Landings 415 volts, 3 Phase, 50Hz. A.C. \SignalsSpecial features 1. Double Acting Shoe Brake for Machine.
2. Fireman Control Switch.
3. Infrared Screen
4. Recess for Granite Flooring 5. Battery Operated Emergency Alarm.
6. VFD Display in Car for Direction and position indication.
7. SS Suspended Ceiling (as per TKEI design).
8. Seven Segment Display for Direction & Position Indicators at all Landings.
9. Energy Saving Feature for Landing Indicators.
10. Battery Operated Emergency Light.
11. SS Round Handrails & Half Length Mirror (Rear Side)
12. ARD
13. Over Load & Full Load Bypass
6
-
-
... More
External Lighting Work
STREET LIGHTING Supply erection and fixing of hot dipped type polygonal tapered type high mast of 20 meters nominal height complete with three point suspention system, head frame from canopy, stainless steel wire rope to carry out combination 9 nos. of 250 watt LED flood light one unit winch, multicore 16 sq mm 4 core XLPE 1.1 kv cable foundation nut bolt washer top and bottom plates inbuilt power tools including supply of lumanaire with assembling erection and supervision of above mentioned mast including wiring and fixing of accessories and luminaires.MAKE-TRILUX or equivalent.
2
-
-
... More
Polygonal poles shaft shall be designed as per ILE TR7 & BS5649 for structural design & as per IS 875 (Part III) 1987 for Dynamic loading. The pole shall be made single piece MS structure continuously tapered having polygonal (8/12 Sides) cross section and a single longitududinal welding. The circumferential welding shall be allowed In the pole shaft. The MS shall be single hot dip galvanized as per BS 729/IS 2629. A suitably designed door shall be provided at 600mm height from the pole base. The door shall be flushed with pole external surface and shall provide easy access for eletrical connections at a maintainable height. A suitable base flange and a top flange will be welded and suitable reinforcement will be provided. Foundation accessories will be as per IS 1367. and including pole plinth size 0.60X0.60mX 1.80mt. with 1:4:8 10mm thic base concrete & 1:2:4 R.C.C. with Reinforce ment including binding etc. all complete as per direction by the E/Ic.MAKE-TRILUX or equivalent.
Dimensional Data:
1. MS sheet thickness: 3mm
2. Galvanization thickness: 65 Microns (min.)
3. Door size: 250 mm x 70mm
4. Pole Height: 10.5M
5. Top diameter.:75 mm (min.)
6. Bottom diameter.: 150 mm 7. Base Plate Dimension : 310 X 310 X 16 mm
8. Foundation Bolts:
a) Nos.: 4
b) Length: 750mm
c) Diam.: 24 mm
45
-
-
... More
Polygonal poles shaft shall be designed as per ILE TR7 & BS5649 for structural design & as per IS 875 (Part III) 1987 for Dynamic loading. The pole shall be made single piece MS structure continuously tapered having polygonal (8/12 Sides) cross section and a single longitududinal welding. The circumferential welding shall be allowed In the pole shaft. The MS shall be single hot dip galvanized as per BS 729/IS 2629. A suitably designed door shall be provided at 600mm height from the pole base. The door shall be flushed with pole external surface and shall provide easy access for eletrical connections at a maintainable height. A suitable base flange and a top flange will be welded and suitable reinforcement will be provided. Foundation accessories will be as per IS 1367. and including pole plinth size 0.60X0.60mX 1.80mt. with 1:4:8 10mm thic base concrete & 1:2:4 R.C.C. with Reinforce ment including binding etc. all complete as per direction by the E/Ic.MAKE-TRILUX or equivalent.
Dimensional Data:
1. MS sheet thickness: 3mm
2. Galvanization thickness: 65 Microns (min.)
3. Door size: 250 mm x 70mm
4. Pole Height: 7.
5M5. Top diameter.:70 mm (min.)
6. Bottom diameter.: 135 mm 7. Base Plate Dimension : 225 X 225 X 12 mm
116
-
-
... More
Polygonal poles shaft shall be designed as per ILE TR7 & BS5649 for structural design & as per IS 875 (Part III) 1987 for Dynamic loading. The pole shall be made single piece MS structure continuously tapered having polygonal (8/12 Sides) cross section and a single longitududinal welding. The circumferential welding shall be allowed In the pole shaft. The MS shall be single hot dip galvanized as per BS 729/IS 2629. A suitably designed door shall be provided at 600mm height from the pole base. The door shall be flushed with pole external surface and shall provide easy access for eletrical connections at a maintainable height. A suitable base flange and a top flange will be welded and suitable reinforcement will be provided. Foundation accessories will be as per IS 1367. and including pole plinth size 0.60X0.60mX 1.80mt. with 1:4:8 10mm thic base concrete & 1:2:4 R.C.C. with Reinforce ment including binding etc. all complete as per direction by the E/Ic.MAKE-TRILUX or equivalent.
Dimensional Data:
1. MS sheet thickness: 3mm
2. Galvanization thickness: 65 Microns (min.)
3. Door size: 250 mm x 70mm
4. Pole Height: 4 M
5. Top diameter.:70 mm (min.)
6. Bottom diameter.: 130 mm 7. Base Plate Dimension : 200 X 200 X 12 mm
145
-
-
... More
Supply, installation testing and commissionings of the following street light / area lighting fixture with lamps on pole including making proper connections and providing cement concrete pedestal/fixing MS angle frame work MAKE-TRILUX or equivalent. a) Street light fitting LED Type TRILUX Cat no. LSL-4000-857 LED Light fixture or equivalent complete with all accessories as required.
145
-
-
... More
a) Street light fitting LED Type TRILUX Cat no. ENDURA IND G3 LED Light fixture or equivalent complete with all accessories as required.
116
-
-
... More
a) Street light fitting LED Type TRILUX Cat no. ENDURA IND G3 LED Light fixture or equivalent complete with all accessories as required.
45
-
-
... More
Supplying & laying of following size of PVC Insulated, PVC Sheathed alu. conductor XLPE armoured cable of 1.1 KV grade cable in ground/in pipe/in duct/in tray/on surface including excavation, sand coshintion, proctective covering & refilling where ever required including & end termination with brass gland & lugs/ferruls etc as required. 4 C x 10sq.mm Aluminium armoured cable
2180
-
-
... More
4 C x 16sq.mm Aluminium armoured cable
3275
-
-
... More
3.5 C x 50 sq.mm. Aluminium armoured cable
1550
-
-
... More
3.5 C x 35 sq.mm. Aluminium armoured cable
510
-
-
... More
3.5 C x 25 sq.mm. Aluminium armoured cable
250
-
-
... More
Supply installing testing & commissioning of out door type street light feeder pillar compartmentalised design, dust tight & vermin proof made out of 14 gauge M.S. sheet, stove powder coated complete as required with following incomming & outgoing as per detail below.
Incomming
160 Amp. 25 KA TPN MCCB L&T with ROM 1 No.
200 Amp. TPN Alu. Bus bar
Outgoing
100 Amp. 10KA TPN MCB 10 No.
1
-
-
... More
Supply installing testing & commissioning of out door type street light feeder pillar (Distribution Panel) compartmentalised design, dust tight & vermin proof made out of 14 gauge M.S. sheet, stove powder coated complete as required with following incomming & outgoing as per detail below.
Incomming
100 Amp. 10 KA TPN MCCB 1 No.Suitable contractor and timer for switching in and switching out100 Amp. TPN Alu. Bus bar
Outgoing
40 Amp. 10KA TPN MCB 4 No.
8
-
-
... More
Substation Panel Work
PART-B : 33 KV H.T. Panel H. T. SYSTEM
33 KV DOUBLE POLE STRUCTURE
Supply, erection, testing and commissioning of 2 pole structure for providing 1 No. 33KV, GOS in accordance with IE rules, & local authority specification and drawings and comprising of the following.
a. 2 Nos. 11 mtr. long MS STEEL poles complete with, pole excavation, MS STEEL foundation, and back filling complete MS steel channel/angle iron etc.
b. 1 Set of cross arms, branching, clamps and painting complete with GI nut, bolts & washers as required (for GO & DO), LA connection.
c .1 set 33KV Insulator complete with spindles & hardware complete as required.d .1 No. 33KV 400A TP Gang operated Air break switches complete with 25mm dia GI pipe operating machanism, handle & locking arrangement.
e. 1 set of 3 nos.33KV single pole drop out fuse complete with barrel fuses, and mounting arrangement.
f. 1 set (3 nos.) 33KV lightning arrestor and connecting to all phases.
g. 1 No. 150 mm dia GI pipe class 'B' (for XLPE cable protection) as required.
h. 2 Set 50mm dia 3m long GI pipe earting with 25 x 6 mm GI earth strip complete as required (for GO & DO & LA)
i 1 nos.33KV HT danger boards and 2 set of anticlimbing devices.33 KV Double Pole Structure
1
-
-
... More
Supplying, Erection, Testing and Commissioning of 33 KV extensible type Panel Board suitable for indoor installation for use on 33 KV 50 c/s earthed system having a symmertrical breaking capacity of 350 MVA for 1 Sec. at 33 KV comprising(a) INCOMING PANEL 1 No comprising of :
1-Metal clad housing with truck having 1250 A TP integral VCB 350 MVA with manual and electrical operated mechanism. (Spring charged motor - 110 V AC) with indication for spring charged & Trip CKT healthy.
1- Set of air insulated copper conductor bus bar chamber 1 - Set of isolating plug and receptacle
1 -Sets of dual core CT's
Core I - 1250/5 Class 5P-10 (10 VA)
Core-II 1250/5A class-I (10 VA)
1 - Flush mounted ammeter, selector switch (Built-in)
1 - 33 kv end termination suitable for 3 x 300 mm XLPE Al.cable 3- Nos. PT's 33/0.11 KV of (250 VA) cast resin type (3 pohase 4 wire)
1- Shunt trip/closing coil - 24 V DC1 -Set of ON/OFF/Trip & circuit healthy and phase indicating lamps. (RYB)
1 - Voltmeter with selector switch (built-in) 1 - No combined 3 element O/C & 1 element E/F IDMTL relay
1 - No. Trivector meter (compatible with PLC/PC)
1 - Set power factor and frequency meter(b) OUTGOING PANEL- 5 NOS. each shall be comprising of :
1-Metal clad housing with truck having 33 KV 630A TP integral VCB 350 MVA with manual and electrical operated mechanism. (Spring charged motor - 110 V AC). Cont..........
-
-
-
... More
1 - Set of air insulated copper conductor bus bar & chamber3- Dual core CTs with rating 630/5A (5P 10 class for protection and class 1 for metering).
1 - Shunt trip closing coil 24V DC.
1- H.T. 33 kv end termination suitable for 3 x 300 sq.mm Al..XLPE cable. 11 KV3 - Element IDMTL 2 high set over current earth fault relay
1 - No. restricted earth fault relay
1 - Set ON/OFF & Trip indication
1 - Auxilary relay for temperature alarm and trip
1 - No. Ammeter with selector switch (Built-in)
1 - Master Trip relay
1- No. Set of terminal block with 20% extra terminal for connection with 2.5 sq.mm 4 core copper conductor PVC insulated PVC sheathed copper cable from panel to transformer
1
-
-
... More
Supplying, Erection, Testing and Commissioning of 33 KV extensible type Panel Board suitable for indoor installation for use on 33 KV 50 c/s earthed system having a symmertrical breaking capacity of 350 MVA for 1 Sec. at 33 KV comprising(a) INCOMING PANEL 1 No comprising of :
1-Metal clad housing with truck having 1250 A TP integral VCB 350 MVA with manual and electrical operated mechanism. (Spring charged motor - 110 V AC) with indication for spring charged & Trip CKT healthy.
1- Set of air insulated copper conductor bus bar chamber 1 - Set of isolating plug and receptacle1 -Sets of dual core CT'sCore I - 1250/5 Class 5P-10 (10 VA)Core-II 1250/5A class-I (10 VA)
1 - Flush mounted ammeter, selector switch (Built-in)
1 - 33 kv end termination suitable for 3 x 300 mm XLPE Al.cable 3- Nos. PT's 33/0.11 KV of (250 VA) cast resin type (3 pohase 4 wire)
1- Shunt trip/closing coil - 24 V DC1 -Set of ON/OFF/Trip & circuit healthy and phase indicating lamps. (RYB)
1 - Voltmeter with selector switch (built-in) 1 - No combined 3 element O/C & 1 element E/F IDMTL relay
1 - No. Trivector meter (compatible with PLC/PC)
1 - Set power factor and frequency meter(b) OUTGOING PANEL- 5 NOS. each shall be comprising of :
1-Metal clad housing with truck having 33 KV 630A TP integral VCB 350 MVA with manual and electrical operated mechanism. (Spring charged motor - 110 V AC). Con t..............
-
-
-
... More
1 - Set of air insulated copper conductor bus bar & chamber
3- Dual core CTs with rating 630/5A (5P 10 class for protection and class 1 for metering).
1 - Shunt trip closing coil 24V DC.
1- H.T. 33 kv end termination suitable for 3 x 300 sq.mm Al..XLPE cable. 11 KV3 - Element IDMTL 2 high set over current earth fault relay
1 - No. restricted earth fault relay
1 - Set ON/OFF & Trip indication
1 - Auxilary relay for temperature alarm and trip
1 - No. Ammeter with selector switch (Built-in)
1 - Master Trip relay
1- No. Set of terminal block with 20% extra terminal for connection with 2.5 sq.mm 4 core copper conductor PVC insulated PVC sheathed copper cable from panel to transformer
2
-
-
... More
Sub Head II :Transformers
Supplying, installation testing and commissioning of the following rating copper wound indoor / out door type transformer complete including the payment to be made to power supply authority for supervision charge, labour charge, cost of L.T/H.T metering etc. (excluding the cost of load security) and making necessary arrangement for charging approval of the sub-station from the competent authority as directed and specified by the department. Transformer should be as per CEA guidelines as ammended up to date upto 200 KVA star rating up to 5 star, above 200KVA as per CEA guidelines for losses along with LV enclosure.
500 KVA,50Hz.11/0.433 KV. Oil filled transformer with Off Circuit tap change.
3
-
-
... More
2000 KVA,50Hz.11/0.433 KV. Oil filled transformer with Off Circuit tap change.
4
-
-
... More
Sub Head III : HTCables
Supply and laying 11/33 KV HT 3 core Stranded compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting compound, XLPE Insulated, Insulation Screening with truded Semi Conducting compound in combination with Copper Tape (0.3kA for 1 se , cores laid up, inner sheath of PVC tape, galvanised flat steel strip armoured and overall PVC Sheathed cable conforming to IS 7098 / (PART-I 1985 with latest amendment cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 120 cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 240sq mm 3 Core armoured 33 KV H.T. U.G. cable
400
-
-
... More
400sq mm 3 Core armoured 33 KV H.T. U.G. cable
7500
-
-
... More
Fabricating and installing following size of perforated M.S. cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders and including painting with powder coating etc as required.
150 mm width x 50 mm depth x 1.6 mm thickness
250
-
-
... More
Supplying and making INDOOR cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 33 KV grade as required.
(a) 300 Sq. mm.
12
-
-
... More
Supplying and making INDOOR cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 33 KV grade as required.
(b) 400 Sq. mm.
12
-
-
... More
Main LT Panel Sub Station Supply erection, testing and comiissioning of L.T. Panel fully compatmentalized cubical type sheet steel clad floor mounted totally enclosed extensible on both sides switch board suitable for use on 430 V 3 phase 4 wire 50 c/s System having 65 KA fault capacity, housed with incoming and outgoing aluminium bus bars interconnection etc. with indication lmps, accessories etc. as required and complete with following incoming and outgoing switchgears with protection and metering etc. as per specification and schematic diagram complete as required. The panel shall be compatible with PLC/PC..
Incoming 6 No. 3200 A 4 pole drawout type electrically operated air circuit breaker with 230V A.C spring charged motor and micro processor based O/C, S/C & E/F release with communication through RS 485 Port compatible with PLC/PC and having following equipment as required
01 No. 24V DC shunt release.
01 No. 230V A.C closing coil.
01 No. 430V A.C under voltage release.
01 No. multi-function metre compatible with PLC/PC with port.
3 Nos. CTs 3200A/5A Cl -1 15VA for metering
3 Nos. CTs 3200A/5A 15VA for Cl-5P20 for protection.
1 No. master trip relay.
1 set potential Transformer 430/ rt 3/ 110 / rt 3, 100 VA for PLC
-
-
-
... More
INDICATION
R,Y,B PhaseBreaker ON-OFF-Trip - Trip ckt healthy Spring charged.
Main Bus coupler (2 Nos.) each shall be equipped with3200 A 4 pole drawout type electrically operated air circuit breaker with 230V A.C spring charge motor with micropocessor based O/C, S/C AND E/F released with communication through 485 port and 8NO+ 8NC auxilirary contacts.
INDICATION
spring charged indication Breaker ON-OFF & tripBUSBAR4000 A TPN electrolytic aluminium.Outgoing FeederNote:- All outgoing feeder shall consists of phase indicating lights along with Ammeter, Ammeter selector switch and CTs.Section 13 No. 1600 A 65 ka TP ACB MDO type for Capacitor pane
l4 No. 1600 A 65 ka FP ACB MDO type 4 No. 630 A 65 ka FP ACB MDO type 2 No. 500 A 65 ka FP MCCB 2 No. 200 A 65 ka FP MCCB
1
-
-
... More
Capacitor Panels Suppling, installation, testing and commissioning of cubical type CRCA sheet steel standing free indoor type 800 KVAR fully automatic capacitor panel with dielectric self healing type shunt capacitor 7% D-tuned harmonic filte with current limiting device discharge register and with 1600 A TPN aluminium bus bars and accessories with connections.The panel shall be well ventilated, dust & Vermin proof as per schematic diagram.
Incomer
1 Set of 1600A 4P ACBs 50 KA (EDO) microprocessor controlled having :
1 No. power factor digital meter 1 No. APFC relay suitable for sequential operation of 7 Capacitor Banks 24 V DC Shunt trip coil. - 1 Set
Breaker control switch - 1 Set
Three Phase Under voltage relay - 1 Set
Three Phase Over voltage relay - 1 Set
1 Set "ON /OFF" push button with 2A, 3P MCB, 10KA One Set of IDMT Relay.(3 Phase Over Current + Earth Fault) or equivalent.1 No. Digital Ammeter with selector switch and 3 NO. 1250 /5A CTsOne Set Breaker ON/OFF/TRIP indicating lights with control MCB’s. One Set of R, Y, B phase indicating light (LED type) with 2A , 3P MCB, 10KA
Bus Bar
2000 A, 415V, 3 strip, 50 KA, 50 Hz Aluminium Bus bar Cont.....
-
-
-
... More
Outgoing
4x100 KVAR LT power capacitor banks with 4 No 100 KVAR 5.67% D tuned harmonic block reactor and TSM (Thyristor Switch Module) mounted in sheet steel enclosure.
6x50 KVAR LT power capacitor banks with 2 No.50KVAR 5.67% D tuned harmonic block reactor and TSM (Thyristor Switch Module) mounted in sheet steel enclosure.
4x25 KVAR LT power capacitor banks with 2 No.50KVAR 5.67% D tuned harmonic block reactor and TSM (Thyristor Switch Module) mounted in sheet steel enclosure.
4 Nos, 250 Amps TPN MCCB, 50 KA
6 Nos. 125 Amps TPN MCCB, 50 KA
4 Nos. 63 Amps TPN MCCB, 50 KAAll Capicator bank shall have suitable rating capacitor rating contractor
3
-
-
... More
Supply, Installation, Testing and Commissioning of Power Control Center Based Auto Syncronizing Auto Starting Auto Sharing &Auto Load Management with PLC System panel suitable for 2 x 2000 +2X1010 KVA DG sets. Comprising of 3 nos Incomers rated at 3200A +2 nos incomer rated 2000A, 2 Nos. Bus Couplers rated at 2500 A & 3 nos. Out going rated at 3200 A with 4 nos AMF Panels. Complete in all respect as reqd as per detail.
Manual Synchronizing 1 No. 144 mm sq. double voltmeter.
1 No. 144 mm sq. double frequency meter.
1 No. 144 mm sq. synchroscope
1 No. synchronizing switch.
1 Set selector switch.
1 Set dark lamp ( 60 watt).
1 No. check synchronizing relay.Auto Synchronizing, Auto starting, Auto sharing and auto-load management with PLC system. The PLC panel shall be located in separate room.
2 Nos. No. - volt monitors for DG supply. (VAG-11 or equivalent).
1 No. No. volt monitors for main supply (VAG-11 or quivalent).
1 No. PLC Comprising:CPU (ALLEN BRADELLY / SIEMENS).
6 Nos. power monitor modules.PLC Rack.Digital input modules.Digital output modules.EPROM (EP)Man Machine inter face (MMI)Software for PLC1 SET MIMIC. (SEM)Set of auxiliary relays.Set of indicating lights and push buttons.Set of control MCBS.
1 No. Auto Manual test switches. Cont.........
-
-
-
... More
1 No. Annuciator with required windows.
1 Nos. status indicator.PrinterComputer Pentium - IVUPS 230 WAC 1.5 KVA (30 minute back) with SMF battery.Power supply charger unit 7.5 A 24 VDC.Control wiring between DG sets, Main panel and PLC panel.MeteringPower & energy monitor model (EM 6400) 3 line display for grid & DG ckt.VISUAL INDICATION & CONTROL1 set running1 emergeny stop push button2 Nos. Governor/AVR raise/lower joy stick.1 No. Breaker close push button.1 No. Breaker trip push button.1 No. Timer Totalizer.ANNUNCIATIONAnnunciation with hooter, test, accept and reset push button & annuciate.ANNUNCIATIONS INSCRIPTIONS SOLID STATE ANNUNCIATOR (6 Nos.) for DG-1 / DG-2 / DG-3/ TR-1/ TR-2/ TR-3InscriptionElectrical FaultReverse Power Emergency Shutdown OverspeedLow Lube oil pressure High water temperature Engine overheatingLow fuel level SpareSpareSpareSpareStatus Indicator annunciations (1 No.) for ASP.SYSTEM OPERATIONThe emergency diesel - alternator sets will function as follows:-AUTOMATIC MODE:-While the normal mains supply is healthy the diesel alternator set will be at rest and the load will be supplied by the mains. During this period, main bus coupler 1 will remain open.The PLC system shall monitor the main supply voltage. If the main supply voltage drops below a certain preset value, the system shall sense these conditions & shall give automatic start command to the control system.After a time delay of 1.5 seconds from the main supply failure the diesel engine shall start.When the D.G. set attains its rated Cont.........
-
-
-
... More
speed and voltage a closing signal shall be given to the ACB of the D.G set.Before giving CLOSE Command to ACB of DG set, the bus coupler (one no.) will be given CLOSE command. At this point of time all the load will be on one D.G.Now the system will continuously monitor the total load on the DG system. If the load is more than the capacity of running DG, the another DG set will receive START command and come in line to share the load and so on.The incoming DG will get synchronized with the running DG and 2 DG's share the load equally and so on.Depending on the total load on the DG system PLC will control the no. of DG sets running at any time. PLC will optimize the no. of DG sets running.When the voltage in the mains get restored, its quality is monitored for about one minute and if proven satisfactory the main supply breaker shall close automatically for retransfer of the load from Diesel engine to the main supply at L.T panel but prior to this operation all DG's dbreaker & bus coupler should open & vice-a-versa. At this time, the bus coupler will be in open position.The set shall stop after idle running of 3 minute after restoration of main supply.The diesel alternator set reverts to its standby conditions and is ready to start should the mains supply fail again.SEQUENCE OF OPERATION OF PLC AUTO START, AUTO SYNCHRONIZING, AUTO LOAD SHARING AND LOAD MANAGEMENT On failure of GRID Supply ALL GRID ACB's shall be switched off. And all BUS COUPLER ACB's shall be swiotched ON automatically.On failure of GRID Supply DG-1 shall start automatically & close its ACB/NIC & shall start feeding the load.On attaining the preset load the DG-2 shall start automatically.Voltage & Frequency of DG-2 shall be monitored & necessary commands shall adjust the parameters of DG-2 with BUS.AUTO Synchronizing System shall verify the phase angle of both cont.......
-
-
-
... More
running sets & also compensate for ACB closing time by initiating closing of the breaker ahead of the actual predictable synchronism thereby ensuring a phase difference of zero degree. The above shall be followed for DG-3 Neutral Isolating Contactor (NIC) of First D.G shall remain in Ckt. In case of manual tripping or tripping of DG set under fault condition NIC of any other DG shall close first before tripping NIC of first set.It shall be possible to alter sequence of DG set starting through manual selectors of through Man Machine Interface.Active power is made equal on both the machines automatically with the help of ACTIVE LOAD BALANCING System through Governor control.Reactive power is balanced automatically with the help of quadrature droop kit already fitted on the machine.However if quadrature droop system is not functioning accurately, REACTIVE LOAD BALANCING-SYSTEM shall control the motorized Potentiometers to achieve KVAR regulation within preset Band.In event of set failing to synchronize, Alarm from Annuciator would invite attention of OPERATOR for Manual Intervention.On restoration of GRID Supply, DG ACB's & BUS Coupler ACB's shall be switched OFF in preset sequence with time delays to cover DIPS & Grip supply ACB's shall be switched ON. DG sets shall continue to run for 3 Minutes after DG ACB has been switched OFF.It shall be possible to alter crucial settings/time delas through. MAN MACHINE INTERFACE.System shall have TOTAL MANUAL OVERRIDE.
1
-
-
... More
Sub-Head-VI : L.T Bus Duct
Supply, erection, testing & commissioning of L.T bus duct sand wich Type with Aluminium busbars of 3200 Amp. TPN, (65 KA for 1 sec.) suitable for connection between TRANSFORMER to ACB of AMF Panel & AMF Panel to ACB of L.T. panel including tinned copper flexible and connection at both ends &with two no cu earth strips & flexible expansion joint in between the length of busduct at every 9m (if the length is more than 10 mtrs) as per specifications (Between Transformer & AMF Panel & AMF Panel to Main L.T panel ) complete as required.
200
-
-
... More
Supply, erection, testing & commissioning of L.T bus duct sandwich type with Aluminium busbars of 2500 Amp. TPN, (50 KA for 1 sec.) suitable for connection between ACB of the main L.T. panel & HVAC Panel including tinned copper flexible and connection at both endswith two no cu earth strips & flexible expansion joint in between the length of busduct at every 9m (if the length is more than 10 mtrs) as per specifications (Between Main L.T panel and HVAC Panel) & (Between Transformer & AMF Panel & AMF Panel to Main L.T panel ) complete as required.
65
-
-
... More
Supply, erection, testing & commissioning of L.T bus duct sand wich type with Aluminium busbars of 2000 Amp. TPN, (50 KA for 1 sec.) suitable for connection between LT Panel and Capacitor panel including tinned copper flexible and connection at both ends& with two no cu earth strips & flexible expansion joint in between the length of busduct at every 9m (if the length is more than 10 mtrs) as per specifications (Between Main L.T panel and Capacitor Panel) complete as required.
30
-
-
... More
Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured, extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 70 Sq.mm 3 and 1/2 core unarmoured cable
355
-
-
... More
95 Sq.mm 3 and 1/2 core unarmoured cable
360
-
-
... More
120 Sq.mm 3 and 1/2 core unarmoured cable
100
-
-
... More
150 Sq.mm 3 and 1/2 core unarmoured cable
250
-
-
... More
185 Sq.mm 3 and 1/2 core unarmoured cable
75
-
-
... More
240 Sq.mm 3 and 1/2 core unarmoured cable
575
-
-
... More
300 Sq.mm 3 and 1/2 core unarmoured cable
120
-
-
... More
400.00 Sq.mm 3 and 1/2 core unarmoured cable
2000
-
-
... More
Sub-Head-VII: Earthing
Installation of Earth stations with necessary Earth plate including providing all accessories masonary enclosure with cover plate having locking arrangement and 20 mm. dia. G.I. pipe, watering pipe with funnel, G.I. bolts, nuts, checknuts etc. but withharcoal or coke and salt as required including excavation work and refilling complete.
With 600 mm x 600 mm x 3 mm. Thick (10.5 Kg. approx.) Copper earth plate.
14
-
-
... More
Providing & fixing copper strip 50x5mm in 65mm dia GI pipe from earth electrode as required including cost of 65mm dia GI pipe "B" class complete as required.
140
-
-
... More
Providing and laying copper strip 50x5mm in recess/surface for connection etc. as required.
300
-
-
... More
Sub-Head-VIII: Miscellaneous Items
Supplying and fixing of non-skid rubber mat 12 mm thick and 900mm width as required including cutting to required lengths of approved make with Test Certificates for L.T. panels.
10
-
-
... More
Supplying and fixing of 4 nos. fire bucket sets painted red and duly filled with sand conforming to IS: 2546-1974.
4
-
-
... More
Supplying and fixing of MS stand suitable for supporting four buckets (Pedestal type)
4
-
-
... More
Supplying and fixing of shock restoration chart written in English and Hindi & local Languge duly framed in as required.
8
-
-
... More
Supplying , installing fixing of carbon diooxide fire extinguisher conforming to IS: 2878 with ISI mark. (4.5 Kg.) Brand: MINIMAX/ FIRE SHIELD
6
-
-
... More
Supplying and fixing of first aid box as approved complete with standard kit as prescribed by Indian Red Cross.
2
-
-
... More
Supply and fixing of H.T. Danger notice plate of 250x200mm made of mild steel at least 2mm thick and vitreous enamelled white on both side with inscription in signal red colour on front side as required.
9
-
-
... More
Sub Head IX:DG Set Supply, Installation, Testing and Commissioning of 2000 KVA, at 0.8 P.F (lagging), diesel engine alternator set mounted on common base frame complete with accessories as per specifications and layout, drawing with battery charger, battery and battery rack residential silencer, stainless steel bellows, 990 lts. day fuel tank, spring load GERB cush pads, electronic control panel, electronic governor etc. as required Radiator Cooled DG Sets along with acoustic enclosure as Per CPCB norms etc as required .
2
-
-
... More
Supply, Installation, Testing and Commissioning of 1010 KVA, at 0.8 P.F (lagging), diesel engine alternator set mounted on common base frame complete with accessories as per specifications and layout, drawing with battery charger, battery and battery rack residential silencer, stainless steel bellows, 990 lts. day fuel tank, spring load GERB cush pads, electronic control panel, electronic governor etc. as required Radiator Cooled DG Sets along with acoustic enclosure as Per CPCB norms etc as required .
2
-
-
... More
Supply and fixing of 50 mm thick mineral wool insulation (LRB) & density 100 Kg/m3 for D.G exhaust pipe with 22 gauge aluminium sheet cladding etc. as required for the under mentioned dia Exhaust pipe System for 1250 KVA DG Sets etc as required
300 mm dia 4.85 mm Thick
50
-
-
... More
200 mm dia 4.85 mm Thick
30
-
-
... More
Insulations of Silincers
Supply, Laying & Fixing of Fuel piping
25 MM NB Pipe
8
-
-
... More
Semi Rotary Hand Operated Pump for Fuel with 5 mtrs Hose
1
-
-
... More
MS Support Structure for Exhaust Piping
MS Support Structure for Exhaust Piping
3500
-
-
... More
Aviation Light
2
-
-
... More
50x3 GI Strip
100
-
-
... More
CCTV Works
SITC of Indoor HD dome camera with IR with 1/2.8-inch CMOS, 2MP, Sensor pixels 1920 x 1080 with IR LED @ 30mts ,Sensitivity-
0.01 lx (color),0.0 lx (mono), H.264 (MP); M-JPEG video compression, Motion, tamper and audio detection, Dyamic range, White balance, BLC, Privacy Masking, Fixed 3.0 mm lens, etc with all necessary fixing accessories.
175
-
-
... More
Supply Installation testing and commissioning of 64 Channel NVR, 320Mbps Bit Rate Input Max(up to 64-ch IP video), 8 SATA Interfaces, alarm I/O: 16/4, RAID0,1,5,10 supported, 3U case,19",
including 10 Days backup etc as required.
3
-
-
... More
Supply Installation testing and commissioning of 900VA online UPS
With battery.
3
-
-
... More
Supply Installation testing and commissioning of 16 Port PoE switch.
12
-
-
... More
Supply Installation testing and commissioning of 8 Port PoE switch.
6
-
-
... More
Supply & laying of CAT-6 UTP cable in suitable size of PVC conduit
including all accessories etc as required.
7500
-
-
... More
Wall Mountable powder coted Rack with 2x5A Power Manager, 2
Horizontal Cable Manager, 1 position fan, min 1 nos of shelf, Front Glass door with Lock & key at server room.
18
-
-
... More
16 CHANNEL DVR- Up to 16 cameras with full HD 1080P display; H.264 dual-stream video compression; Full channel D1(4CIF) realtime recording; HDMI / VGA / TV/Spot(BNC) synchronous video output; Live, recording, playback, backup & remote access; 16 channel simultaneous realtime playback & smart search; Smart video detection: MD, camera blank, video loss; Easy backup: USB devices, network download; Alarm triggering screen tips, buzzer, PTZ, e-mail & FTP upload; Built-in web server, multi-DVR client, DMSS & CMS; Support 2 SATA HDDs, 2 USB2.0
26
-
-
... More
Supply Installation testing & Commissioning of Outdoor Type Bullet Camera Up to 2 megapixel high resolution, Max. 1920 × 1080 @30fps ,6mm,Ultra-low light ,120dB Wide Dynamic Range,IR range
:80 meter EXIR array ,3D Digital Noise Reduction. The camera may also support custom firmware for specific integration with a 3rd
party VMS etc as required.
20
-
-
... More
Supply Installation testing & Commissioning of ANPR Camera1/1.8’’ Progressive Scan CMOS, Up to 2 megapixel high resolution,Max. 1920 × 1080 ,2.8~12mm @ F1.4, angle of view: 92°~32°,Built-in Micro SD/SDHC/SDXC slot, up to 128 GB,3D DNR/ROI/Defog/EIS,Road Traffic and Vehicle Detection, Vehicle Speed Support vehicle speed under 120 km/h (74.6 mi/h) Line number Up to 4 lines supported. Recommended to set 1 or 2 lines for best performance, Direction Support capture and recognition of vehicles both approaching and leaving Whitelist and Blacklist Up to 2048
2
-
-
... More
Supply Installation testing & Commissioning of PTZ Camera, The camera shall offer three video streams with up to 2MP resolution, utilizing a progressive scan CMOS imaging sensor,Smart function: Manual, Panorama, Intrusion, Resolution 2MP(1980*1080P), 30 optical Zoom and 16X digital Zoom , 150 meter IR distance etc as required.
4
-
-
... More
Supply & fixing of PTZ camera mounting Suitable for speed dome
pendent mounting including all accessories as required.
4
-
-
... More
Supply, Installation, testing and commissioning of key board with joy
stick.
1
-
-
... More
Supply Installation testing and commissioning of 8 PORT POE plus
for PTZ camera.
2
-
-
... More
Supply, laying and making connection of 12 Core Optical Fiber Cable.
3500
-
-
... More
Supply & laying of 50mm Dia HDPE pipe including excavation and
refilling the trench and making the surface good etc as required..
3500
-
-
... More
Supply Installation testing and commissioning of Light Interface unit.
10
-
-
... More
Supply Installation testing and commissioning of LC-LC cord.
10
-
-
... More
Supply Installation testing and commissioning of LC-SC cord.
10
-
-
... More
Supply Installation testing and commissioning of 4 port 1 pair
media/fiber converter.
10
-
-
... More
Supply Installation testing and commissioning of optical fiber cable
tray etc as required.
55
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch,
connections etc. as required.
40
-
-
... More
Supply installing testing & commissioning of out door type junction box, dust tight & vermin proof made out of 14 gauge M.S. sheet, stove powder coated complete as required with following incomming &
outgoing as per detail below.
10
-
-
... More
LAN & EPABX System Work
Supplying,installtion,testing & commsissioning of 4-pair, Cat6 UTP Cable LSZH
35000
-
-
... More
Supplying,installtion,testing & commsissioning of 24 Port Cat 6 Jack Panels Un-Loaded, for Data
34
-
-
... More
Supplying,installtion,testing & commsissioning of Cat 6 RJ 45 I/O Blue for data
600
-
-
... More
Supplying,installtion,testing & commsissioning of 24 Port Cat 6 Jack Panels Un-Loaded, for Voice
37
-
-
... More
Supplying,installtion,testing & commsissioning of Cat 6 RJ 45 I/O Green for Voice
700
-
-
... More
Supplying,installtion,testing & commsissioning of Dual face plate
700
-
-
... More
Supplying,installtion,testing & commsissioning of Blank inserts for Jack Panel
40
-
-
... More
Supplying,installtion,testing & commsissioning of Cat 6 mounting cord - 7ft.Blue for data
60
-
-
... More
Supplying,installtion,testing & commsissioning of Cat6 mounting cord -4ft Green for Voice
60
-
-
... More
Supplying,installtion,testing & commsissioning of 1U Cable Manager
60
-
-
... More
B.Fiber Components Supplying,installtion,testing & commsissioning of 6 Core OM3 Multimode Mode Fiber Armored
500
-
-
... More
Supplying,installtion,testing & commsissioning of 12/24 Port Rack Mounted LIU, OM3
10
-
-
... More
Supplying,installtion,testing & commsissioning of SC-SC Fiber MM Duplex 3Mtr Patch Cord, OM3
200
-
-
... More
Supplying,installtion,testing & commsissioning of 6 Core OM3 Multimode Mode Fiber Armored
3000
-
-
... More
Supplying,installtion,testing & commsissioning of 12/24 Port Rack Mounted LIU, OM3
56
-
-
... More
C. Racks Supplying,installtion,testing & commsissioning of 22U Network rack with base support
10
-
-
... More
E. Active Components Supplying,installtion,testing & commsissioning of L2 Switch, 24 port
75
-
-
... More
E. Active Components Supplying,installtion,testing & commsissioning of L3 Switch, 24 SFP ports with 10G suuport
2
-
-
... More
SFP-LX module
60
-
-
... More
E. EPBX Exchange Supplying,installtion,testing & commsissioning of Business Phone Communication System Consisting of the following :400 Analog Extensions, 8 Digital Extensions, I PRI ( 30 Voice Channel), 4 Port Inbuilt Voice Mail (1GB)with auto attendant, 02 Port Mobile Extension,04 Port BRI/ST, I no. Opertaor Console, LPU
1
-
-
... More
Supplying,installtion,testing & commsissioning of Business Phone Communication System Consisting of the following : 200 Analog Extensions,8 Digital Extensions, I PRI ( 30 Voice Channel), 4 Port Inbuilt Voice Mail (1GB)with auto attendant, 02 Port Mobile Extension,04 Port BRI/ST, I no. Opertaor Console, LPU
1
-
-
... More
Supplying,installtion,testing & commsissioning of Business Phone Communication System Consisting of the following : 100 Analog Extensions,8 Digital Extensions, I PRI ( 30 Voice Channel), 4 Port Inbuilt Voice Mail (1GB)with auto attendant, 02 Port Mobile Extension,04 Port BRI/ST, I no. Opertaor Console, LPU
1
-
-
... More
G.Handsets Supplying,installtion,testing & commsissioning of 6 Row backlit Digital Phone with Acoustic echo cacelling
50
-
-
... More
Supplying,installtion,testing & commsissioning of 2 Row Display digital office telephone
50
-
-
... More
Supplying,installtion,testing & commsissioning of Analog Push Button Telephone
55
-
-
... More
Supplying & Fixing of following accessories for Nurse call system confirming to the following standards: DIN VDE 0834 Nurse call systems in hospitals, nursing homes and similar institutions.
Part 1: Requirements for equipment, erection and operation.
Part 2: Environmental conditions and electromagnetic compatibility.
DIN EN 793 Special requirements for the security of medical supply units. DIN EN 60601-1 Medical electrical equipment. Part 1: General requirements for basic safety and essential performance. DIN EN 60601-1-1 Medical electrical equipment
Part 1-1: General requirements for safety; Collateral standard: Safety requirements for medical electrical systems. EN 61000-6-2 Electromagnetic compatibility (EMC) Part 6-2: Generic standards - Immunity for industrial environments. EN 61000-6-3 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light industrial environments. DIN VDE 0100 Erection of power installations, with rated voltages up to 1000 V; chronological data of installation specifications. DIN VDE 0107 High voltage power installations in medical buildings with stationary or outpatient areas
Safety:
-
-
-
... More
In the case of power failure, calls should be stored for approximately 24 hours. As soon as the power is switched on again presences and calls which were set prior to power failure should be indicated. the case of failure of the zone controller, the system should operate in an emergency mode which involves the functions normal and emergency calls, cancellation, presence indication and call transfer to rooms where presence has been set as well as the visual indication of the corridor lamps. The zone controller should monitor all active units and displays any malfunctions as a collective message. Any malfunction in any unit should be detected and reported within 90 seconds. The lamp outputs of the electronic modules should be short circuit protected. Cont........
-
-
-
... More
All electronic modules should be fitted with a “self-restoring” fuse. This not only protects the electronic modules but also should protect the equipment in the room.
Supplying, installation, testing and commissioning of Central Components for Nurse Call system
Supplying, installation, testing and commissioning of Zone controller which is the control unit and it monitors and synchronizes all data traffic and intercom connections (conversations, announcements) within the organizational unit and coordinates communication with other central control units via IP communication (zone data bus or ETH-LAN). In addition, it controls display screens and acoustic call messages in accordance with stipulated priorities / service (zone linking) within a system. It has flexible configuration options for types of call, groups, services, general announcements, display texts, device parameters, system language, etc. depending on customer requirements, via the server (PC) with a comfortable Windows GUI. It uses a maximum of 64 central control units with up to 250 logical groups (sub-groups). Networking is implemented via the ETH-LAN IP interface (data / audio) and the optional zone data bus POF (data / audio). It includes an integrated gateway function for forwarding data / audio signals from the upstream bus interface (ETH-LAN, zone data bus) to the corridor data bus. Include Field Bus Card (FBC) POF‐POFused to link the Zone Conrollers via the ward data bus (SBUS) / zone data bus and POF patch cable.
9
-
-
... More
Supplying, installation, testing and commissioning of Plug-in board for the Zone Controller to manage a maximum of 127 active system components in the corridor data bus, such as room terminals, room electronic modules, information displays and other units. The corridor data bus of a field bus card can be segmented into up to six sub-groups. Features: Service socket for the configuration module (KFM), Communication interface to the active system components in the corridor data bus (data / audio), Length of corridor data bus: 500 m (data / audio), max. 2500 m (with repeaters), Corridor data bus repeater: max. four items (for data / audio respectively) Number of corridor data bus modules: 127 (required after 64 repeaters) Number of corridor data bus plus bed bus modules: 255.
9
-
-
... More
Supplying, installation, testing and commissioning of Single-phase power supply (2 A) for constant DC supply of the Zone Controller, fitted with a P1J plug. It should be protected against short-circuits, overloads and power surges, with EN60601-1 approval for the healthcare sector
9
-
-
... More
Supplying, installation, testing and commissioning of Single-phase power supply unit (10 A) for constant direct current supply to the nurse call system. Compact construction using modern primary clocked circuit technology (according to EN 6100-3-2). Include Mounting rack and Protective cover
50
-
-
... More
Supplying, installation, testing and commissioning of Corridor databus splitter / repeater / terminator -active for junction in corridor databus and for amplification, along with coverplate and frame for coverplate
36
-
-
... More
Supplying, installation, testing and commissioning of Corridor databus terminator -passive- as terminating module with the corresponding impedance for the corridor bus, along with coverplate and frame for coverplate
9
-
-
... More
Supplying, installation, testing and commissioning of P.C Pentium5, 3GB Ram, 320GB hard disk,TFT 19" Screen,Core to duo processor,950 accelector graphic card, printer
1
-
-
... More
Supplying, installation, testing and commissioning of 24 V DC / suitable Amperage uninterrupted power supply (online DC UPS) for establishing a secure, fully uninterruptible 24 V direct current power supplyto the connected call system in the system group with the 24 V DC power supply in the case of power failure by connecting a battery module. When supply voltage is available, the power supply unit supplies the devices by simultaneously charging the batteries of the UPS device. Batteries for half an hour back up to be included.
1
-
-
... More
Supplying, installation, testing and commissioning of software package for block graphics display of calls / call logging / evaluation of calls transmitted from the nurse call system on the PC. It should be suitable for managing a paging interface, a confi guration module (block graphics) and a control panel.
1
-
-
... More
Supplying, installation, testing and commissioning of Duty Room/ Nurse Station components
Supplying, installation, testing and commissioning of Duty room interface with integrated signal lamp designed with four lamp sections using power-saving LED technology to serve as a controller for duty room with speech function to integrate master station into corridor databus. It should be with integrated circuit technology for passive call and cancellation units including call circuit monitoring. Include Connection Board.
18
-
-
... More
Supplying, installation, testing and commissioning of Display module with high-quality LCD and integrated call/cancel push-button to indicate presence of the nursing staff. It should be equipped with dual line, 8-character, alphanumeric LCD with background illumination, also legible from a greater distance (reading angle 110 degrees). If presence is set, system messages such as calls, malfunctions and presences should be displayed with top priority, rolling if necessary, with several messages of identical priority. It should allow for acoustic call forwarding, if presence is set, and option for triggering further calls. Features
• Integrated LCD (2 x 8 characters)
• Indication of system messages
• Sound generator for call forwarding
• Button for presence function
• LED reminder lamp (green)
• Button for call function
• LED orientation lamp and reassurance lamp, red
• Connection via bed databus or corridor databus
18
-
-
... More
Supplying, installation, testing and commissioning of Information display for wall mounting with red LED dot matrix for the self-luminous alphanumeric plain text display. It should have Speakers for announcements and a tone generator for acoustic call forwarding should be integrated. It should display System message with room and bed identification (up to 8 characters, alphanumeric) and symbols for call type (e.g. public washroom, doctor, fault). It should have Priority-controlled display with automatic scrolling function (including arrow display) with several pen ding messages of one priority. Function monitoring via zone controller. Features • Display with alphanumeric room and bed identifi
cation
• Call type display
• Acoustic call forwarding (configurable)
• Announcements via speaker configurable
• Messages are displayed by priority (in the sequence: alarm call - emergency call - call)
• If several messages of the same priority are pending, they are alternately scrolled
18
-
-
... More
Supplying, installation, testing and commissioning of Patient Room Components without Voice
Supplying, installation, testing and commissioning of Room electronics module for Single Bed rooms, with integrated room signal lamp designed with 4 lamp sections, using power-saving LED technology. It should serve as serves as a controller for patient and function room without speech function with connecting options for call units and cancel units including call circuit monitoring. It should be equipped with service socket for the configuration module, VDE compatibility mode and option for allocation of a 8-character alphanumeric text for the room and bed units. Include Connection Board
- Design without bed databus
- Signal lamp using power-saving long-life LED technology
- Bed identifi cation for two beds with call circuit monitoring
Features: • Bed databus for connecting additional selective bedside call units and display modules within the room
• Room calls: Normal call, emergency call, diagnostic call, doctor call
• WC calls: Normal call, enhanced call, WC emergency call
• Cancellation and presence: Combined cancellation/ presence, Presence 1 (green) separate cancellation for bathroom / WC
• Acoustic signals: Call transfer for normal calls and emergency calls, doctor calls, staff call, meal call
• Optical signals: WC call lamp (white), corridor lamp (red), presence lamp (green)
• Security function: Short-circuit resilient outputs, call circuit monitoring
5
-
-
... More
Supplying, installation, testing and commissioning of Room electronics module, for multi bed patient rooms with integrated room signal lamp designed with 4 lamp sections, using power-saving LED technology. It should serve as serves as a controller for patient and function room without speech function with connecting options for call units and cancel units including call circuit monitoring. It should be equipped with service socket for the configuration module, VDE compatibility mode and option for allocation of a 8-character alphanumeric text for the room and bed units. Include Connection Board
- Design with bed databus for the connection of active bed databus components
- Signal lamp using power-saving long-life LED technology
- Bed identifi cation for two beds with call circuit monitoring
Features: • Bed databus for connecting additional selective bedside call units and display modules within the room
• Room calls: Normal call, emergency call, diagnostic call, doctor call
• WC calls: Normal call, enhanced call, WC emergency call
• Cancellation and presence: Combined cancellation/ presence, Presence 1 (green) separate cancellation for bathroom / WC
• Acoustic signals: Call transfer for normal calls and emergency calls, doctor calls, staff call, meal call
• Optical signals: WC call lamp (white), corridor lamp (red), presence lamp (green)
• Security function: Short-circuit resilient outputs, call circuit monitoring
104
-
-
... More
Supplying, installation, testing and commissioning of Cancel push-button with flush mount supporting ring and expanding/retaining clamps for flush-mounting boxes. It should have LED reminder lamp (green) and sound generator for call forwarding Include Coverplate and Mounting frame. -Type of protection IP 40
109
-
-
... More
Supplying, installation, testing and commissioning of Call push-button for Code Blue call initiation to connect to an electronic module or room terminal via a passive input. Superordinate room identification should be displayed after call initiation. Function monitoring should be carried out by the electronic module or room terminal (call circuit monitoring). Include Coverplate and Mounting frame. -Type of protection IP 40
109
-
-
... More
Supplying, installation, testing and commissioning of Patient Bedside Components without voice
Supplying, installation, testing and commissioning of Call module for call initiation with individual bed identifi cation for connection to an electronic module or room terminal with bed databus. It should support Identification display (up to 8 digits, freely configurable) on call initiation and monitoring of connected call units (call circuit monitoring). Include Coverplate and Mounting frame. Features: • 1 call push-button
• 1 LED orientation / reassurance lamp (red)
• 1 socket, 7-pin
• Control contact for microphone interfacing unit with bed identifi cation
525
-
-
... More
Supplying, installation, testing and commissioning of Pear push-button with 7-pole plug, 3 m connection cable and slot for line insertion to enable variable looping and pull relief. Features: • 1 call push-button (red) with nursing staff symbol
• 1 LED orientation lamp / reassurance lamp (red)
525
-
-
... More
Supplying, installation, testing and commissioning of Patient toilet and shower Components
Supplying, installation, testing and commissioning of Electronics module for Non attached Toilets using power-saving LED technology. - Design without bed databus
- Signal lamp using power-saving long-life LED technology
Features: • WC calls: Normal call, enhanced call, WC emergency call
• Cancellation and presence: Cancellation for bathroom / WC
• Optical signals: WC call lamp (white)
• Security function: Short-circuit resilient outputs, call circuit monitoring
176
-
-
... More
Supplying, installation, testing and commissioning of Cancel push-button with flush mount supporting ring and expanding/retaining clamps for flush-mounting boxes. Include Coverplate and Mounting frame. Features: • 1 button for cancel function
• 1 LED reminder lamp (green)
• 1 sound generator for call forwarding
186
-
-
... More
Supplying, installation, testing and commissioning of Call push-button for call initiation to connect to an electronic module or room terminal via a passive input. Include Coverplate and Mounting frame. Features: • 1 call push-button
• 1 LED orientation and reassurance lamp (red)
113
-
-
... More
Supplying, installation, testing and commissioning of Call switch with pull cord and knob for connection to an electronic module or room terminal via a passive input for attached toilets. Include Coverplate and Mounting frame for coverplate
Features: • 2 m PVC cord with red ABS-knob
• 1 LED reassurance lamp (red)
73
-
-
... More
Supplying, installation, testing and commissioning of system cable
Supplying, installation, testing and commissioning of Li2Y 2x1,5 mm + I2Yv 2x2x0,6 (ST) HM2, Halogen-free system cable 6-core. Rate to be quoted per meter
10000
-
-
... More
Solar Power Backup System Work.
Solar PV Modules incl. all accessories like Al Clamps
Aluminum Module Mounting Structure including all SS corrossion resistant hardware and other accessories as required.
Complete cabling for connecting the solar modules, strings, arrays and interconnecting cables incl. all Hardware and connecting items as required
All Array Junction boxes / String Boxes incl. all system components as required for mounting and installation hardware to make the system complete
Grid tied Inverters (Power conditioning Units) incl. all associated equipments as per the designInterconnecting cablesProtection and Grid synchronization equipments and accessories. Plant Monitoring System Supply of all the equipments as required to complete the Balance of Plant Systems as may be required :- Earthing/Grounding system complete with earth mat & earth pit etc. Lightening Protection System Surge Protection System Startup and commissioning sparesMandatory SparesSpecial Tools & Tackles / DevicesRecommended Spares (For Three (3) years of plant Operation)Typical System Components Ø Solar PV Modules with Clamps Ø Aluminum Module Mounting System Ø Power Conditioning Unit Ø Cables and Connectors Ø Balance of System Ø Safety Earthing/Grounding System Ø Lightning Protection System Ø Lightning Surge Arrestors Ø Power Evacuation SystemØ Plant Monitoring System complete
-
-
-
... More
Civil WorksArrangement of all site facilities as required for erection, testing, commissioning and PG testing incl. storage of material, site office, accommodation of EPC staff, transportation, communication, lodging and boarding etc.All Design drawings, As-Built Documents, Operation and Maintenance ManualsAll statutory approval, licenses such as Chief electrical Inspector approval of the complete plant. Periodic inspection of Progress by Third party agency/ authorized person nominated by Owner during erection, commissioning phase. Plant Acceptance Tests to be witnessed by Third Party agency/ authorized person nominated by Owner.Plant Handing over incl. Successful PG Testing.On-Job at-Site Training of Owner’s engineers regarding the Operation and Maintenance of the plantDeputation of supervisor at siteElectrical characteristics· Open Circuit Voltage (Voc)· 38.00V Maximum Operating Voltage (Vmp)· 30.4V Short Circuit Current (Isc)· 8.98V Maximum Operating Current (Imp)· 8.22V Module Efficiency· 15.37% Maximum Power in STC (Pmax)· 305Wp Operating Temperature-40°-C//+850CPV module specificationsSpecifications and dimensions Cell· Front glass· 3.2 mm tempered glas Frame· Anodized aluminium alloy Plug connector protection degree· Warranty§ Grid connection
1
-
-
... More
PA SYSTEM
SITC of Public Address & Voice Alarm system. The selected system devices like controllers and Paging Microphones,Amplifiers and Speakers
Supply,installation ,testing & Commissioning of Voice Alarm Controller with Expander having features like announcement to 8 zones expandable up to 128 zones , built in 500W Power Amplifier, input port of emergency microphone on the front panel, 255 configurable priority levels including emergency, music to selected zones can be played, built in 1 GB memory for audio files,volume adjustment with digital volume control.
Approved Makes : Ateif / Honeywell - Intevio /X-618
2
-
-
... More
Supply,installation ,testing & Commissioning of Voice Alarm Expander with 24 zones ,independent channel volume control,monitored contact inputs & outputs,automatic fault detection: main power, backup power, CPU, amplifier, speaker line, speaker line grounding.
Approved Makes : Ateif / Honeywell - Intevio/X-618
2
-
-
... More
Supply,installation ,testing & Commissioning of voice Alarm Call Station having gooseneck condenser Microphone with 8 zone Selection Keys and an All-Call-Key, PTT Switch, selectable gain, speech filter and limiter for improved intelligibility,built in speaker for audio channel monitoring,LED indication for zone selection complete as required, Emergency Microphone bypass controller, incase of CPU failure
Approved Makes : Ateif / Honeywell- Intevio / X-618
2
-
-
... More
Supply,installation ,testing & Commissioning of voice alarm call station zone extension keypad for zone selection, group selection, broadcast task selection,
volume control or zone close, LED indication as required
Approved Makes : Approved Makes : Ateif / Honeywell- Intevio / X-618
4
-
-
... More
SITC of 500W Power Amplifier with high efficiency,low power consumption with self indicator testing function, self-protection from overheat, overcurrent, overvoltage,
undervoltage, overload and short circuit,balanced and unbalanced audio inputs.
Approved Makes : Ateif / Honeywell- Intevio / X-618
12
-
-
... More
SITC of 6W Ceiling Speaker with max SPL1M/1W 96dB . Frequency response of 80Hz-20KHz with a dispersion angle of 160 deg. The speaker should have tappings at 6W/3W/1.5W
Approved Makes : Approved Makes : Ateif / Honeywell- Intevio / X-618
1223
-
-
... More
Supply and fixing of 2 x 1.5 sqmm armoured insulated coppor conductor wire
7430
-
-
... More
FIRE ALARMSYSTEM
SITC of Intelligent Analog Addressable Type Photoelectric Type Smoke Detector Complete with Dual LED , Hard Addressable Having rotary decade Address swicthes from 01-99, complete with Mounting Base Complete as required Conforming to BS 5839 Standards and Duly Approved by EN54/LPCB(Make :- Morley/Notifier/Firelite/Gent)
298
-
-
... More
SITC of Intelligent Analog Addressable Type Heat Detector Complete with Dual LED , Hard Addressable Having rotary decade Address swicthes from 01-99, complete with Mounting Base Complete as required Conforming to BS 5839 Standards and Duly Approved by EN54/LPCB(Make :- Morley/Notifier/Firelite/Gent)
200
-
-
... More
SITC of Intelligent Analog Addressable Type Heat-Smoke Multi Detector Complete with Dual LED , Hard Addressable Having rotary decade Address swicthes from 01-99, complete with Mounting Base Complete as required Conforming to BS 5839 Standards and Duly Approved by EN54/LPCB(Make :- Morley/Notifier/Firelite/Gent)
1900
-
-
... More
Supply, installation, testing & commissioning of 5 Loop Micro processor based 2 wire fault tolerant loop, required loop networkable type (each loop accessing 99 detectors and 99 modules ) fire alarm/detection control panel. The panel shall be able to give location of all fire/fault conditions of addressable units via the address codes. Further, the panel must be able to automatically switch ON /OFFrespective control module when ever any alarm is triggered. The panel shall have rectifier, Loop cards, 80 character L C D unit to indicate Fire/Fault Signal with address and analog output, external/inbuilt printer to log all fire or fault events complete in all respects.The Panel Shallbe Sheet Steel Painted, selaed to IP30. The Panel Shall have 20 Zones with Individual LEd Indicators, expandable to 80 LED Indicators. The Panel Shall have 3 Serial Ports. The panel shall have a built in power supply and battery charger along with maintenance free 24 AH, 2 x 12 volt SMF Lead acid batteries capable of running for a minimum of 24 hours with battery charger complete as required.and as per specifications. conforming to BS5839 Standards and Duly Approved by EN54/LPCB(Make :- Morley/Notifier/Firelite/Gent)
2
-
-
... More
Supply, installation, testing & commissioning of 2 Loop Micro processor based 2 wire fault tolerant loop, required loop networkable type (each loop accessing 99 detectors and 99 modules ) fire alarm/detection control panel. The panel shall be able to give location of all fire/fault conditions of addressable units via the address codes. Further, the panel must be able to automatically switch ON /OFF respective control module when ever any alarm is triggered. The panel shall have rectifier, Loop cards, 80 character L C D unit to indicate Fire/Fault Signal with address and analog output, external/inbuilt printer to log all fire or fault events complete in all respects.The Panel Shallbe Sheet Steel Painted, selaed to IP30. The Panel Shall have 20 Zones with Individual LED Indicators, expandable to 80 LED Indicators. The Panel Shall have 3 Serial Ports. The panel shall have a built in power supply and battery charger along with maintenance free 24 AH, 2 x 12 volt SMF Lead acid batteries capable of running for a minimum of 24 hours with battery charger complete as required.and as per specifications. conforming to BS5839 Standards and Duly Approved by EN54/LPCB(Make :- Morley/Notifier/Firelite/Gent)
6
-
-
... More
SITC of Intelligent Analog Addressable Type Manual Call Point having Surface or flush mounting Option fully complaint to EN54 having Rotary Decade Swicthes for Addressing from 01-99 complete with Back Box for Mounting Complete as required conforming to BS5839 Standards and Duly Approved by EN54/LPCB(Make :- Morley/Notifier/Firelite/Gent)
90
-
-
... More
Supply, installation, testing & commissioning of 1 Loop Micro processor based 2 wire fault tolerant loop, required loop networkable type (each loop accessing 99 detectors and 99 modules ) fire alarm/detection control panel. The panel shall be able to give location of all fire/fault conditions of addressable units via the address codes. Further, the panel must be able to automatically switch ON /OFF respective control module when ever any alarm is triggered. The panel shall have rectifier, Loop cards, 80 character L C D unit to indicate Fire/Fault Signal with address and analog output, external/inbuilt printer to log all fire or fault events complete in all respects.The Panel Shallbe Sheet Steel Painted, selaed to IP30. The Panel Shall have 20 Zones with Individual LED Indicators, expandable to 80 LED Indicators. The Panel Shall have 3 Serial Ports. The panel shall have a built in power supply and battery charger along with maintenance free 24 AH, 2 x 12 volt SMF Lead acid batteries capable of running for a minimum of 24 hours with battery charger complete as required.and as per specifications. conforming to BS5839 Standards and Duly Approved by EN54/LPCB(Make :- Morley/Notifier/Firelite/Gent)
4
-
-
... More
SITC Of Addressable Type Loop Powered Strobe complete with Mounting Base as required conforming to BS5839 Standards and Duly Approved by EN54/LPCB(Make :- Morley/Notifier/Firelite/Gent)
90
-
-
... More
SITC of Response Indicators outside the rooms for getting fire indications of detectors installed above false ceiling area interconnecting to loop cable complete as required(Make :- Morley/ASES/Firelite/Agni)
800
-
-
... More
SITC of Intelligent Analog Addressable Type Network Card dully approved to GEA GE1-082conforming to BS5839 Standards and Duly Approved by EN54/LPCB(Make :- Morley/Notifier/Firelite/Gent)
12
-
-
... More
SITC of Intelligent Analog Addressable Type output Control module dully approved to GEA GE1-082conforming to BS5839 Standards and Duly Approved by EN54/LPCB(Make :- Morley/Notifier/Firelite/Gent)
130
-
-
... More
SITC of Repeator Panel
13
-
-
... More
SITC of Fire Fighter Telephone System
5
-
-
... More
SITC of RS 232 communication module.
2
-
-
... More
SITC of Visualeyez 16 software and regular licence enables the display of key information from their analogue addressable fire detection and fire alarm system. Supports Sixteen panels.
2
-
-
... More
SITC of Fire Fighters Remote Handset
10
-
-
... More
SITC of Loop driver card for Morley-IAS protocol, 460mA.
22
-
-
... More
SITC of Loop isolation module. Requires M200E-SMB for surface mounting or M200E-DIN for mounting to DIN rails.
270
-
-
... More
SITC of Single Input Monitor Module, requires M220E/SMB for surface mounting or M200E-Din for mounting to DIN rails.
90
-
-
... More
SITC of Duct sensor housing only, complete with base. - LPCB Approved
48
-
-
... More
Supply and fixing of 2 x 1.5 sq mmm armoured insulated copper conductor wire. Make: No Burn,Tyco, Prysmium, Lapp.
15000
-
-
... More
MEDICAL GAS SYSTEM
OXYGEN SYSTEM Supply, erection, installation, testing & commissioning of 12+12 size of main oxygen manifold complet with 24 nos. pig tail pipe & 24 nos. of non return valve with middle frame complete in all aspect fully complies and meets with, htm 2022 standard for oxygen & CE certified.
1
-
-
... More
Supply, erection, installation, testing & commissioning of 6+6 cylinders Emergency manifold complete with 12 nos. pig tail pipe & 12 nos. of non return valve with middle frame complete. htm 2022 standard for certified.
1
-
-
... More
Supply, erection, installation, testing & commissioning of fully automatic oxgyen control panel designed with both safety & continuity of flow supply at constant pressure via to bank bottled Gas cylinders with following Monitoring. (HTM 2022 standard CE certified) A bank in use ( Green indication) B-Bank ready for use (yellow indication ) control panel has build in LED display to indicate normal, low for fine pressure. The control panel includes pressure gauge (63mm) to indicate the gas pressure of each header ad pipe line distribution pressure. Capable to provide distribution flow rate in excess of 14500 LPM. The control panel incorporate safety puncture in case pressure excess 100 Psi.
1
-
-
... More
Supply, installation, testing & commissioning of oxgyen gas outlets, gas outlet point for oxygen outlet points confirm to the norms prescribed as per HMT 2022 standard CE certified. Totally leak proof, safe & easy to operate having non interchangeable specific gas/vacum probes equipped with non return valves to facilitate on sevicing and repair. indentfication with colour for specific gas/vacum beside name of the gas is punched on its face. Double locking system.
900
-
-
... More
Supply, erection, installation, testing & commissioning of anodised aluminium body & control knob oxygen flow meter with Humidifier Bottle. 0-15 L/min standard flow rate. Fully compliles & meets with, HTM 2022 Standard & CE certified
550
-
-
... More
Supply, erection, installation, testing & commissioning of oxygen H.P. anstistatic tube fully compliles and meet with HTM 2022 Standard & CE certified
750
-
-
... More
NITROUS OXIDE SYSTEM
Supply, erection, installation, testing & commissioning of 8+8 Size of N20 manifold complet with 16 nos. pig tail pipes & 16 nos. of non return valve with middle frame complete in all aspect fully compiles & meets with HTM 2022 standard for N20 CE certified.
1
-
-
... More
Supply, erection, installation, testing & commissioning of 1X4 cylinder emergency manifold with 4 nos of tail pipe & 4nos. Of non return valves with middle frame complete in all aspect fully compiles & meet with, HTM 2022 standard CE certified.
1
-
-
... More
Supply, erection, installation, testing & commissioning of fully automatic N20 control panel 500 LPM. Fully compiles & meet with, HTM 2022 standard CE certified.
1
-
-
... More
Supply, erection, installation, testing & commissioning of N20 Gas outlets, gas outlet point for N20 outlet points confirm to the norms prescribed as per HTM 2022 standard CE certified. Totlly leak proof safe & easy to operate having non-interchangeable specific gas/vacum probes Equipped with non return valve to facilitate on servicing & repair. identification with colours for specific gas/vacum beside name of the gas is punched on its face. Double locking system.
25
-
-
... More
Supply, erection, installation, testing & commissioning of N20 H.P. tube with antistatic core. Fully compiles & meets with. HTM 2022 standard. CE certified.
40
-
-
... More
MEDICAL AIR AND SURGICAL AIR PLANT
Supply & fixing air compressor for 4 bar make ingersoll rand/anest Iwata/air care) CFM technology based 100% oil free air cooled types two stage air compressure having piston & piston rings of Composite resin material for high perform, durable design seizure free, long overhaul cycle & high tempreture resistant (up to 300 deg CO low noise 7 low vibration lvl. base plate mountaed air compressure complete with electrical.
Motar 15HPPower supply 3 Phase/50HzNo. of stage Twopiston 1619 LPM/57.18 Displacement CFMworking pressure 8.5kg/sqcmNo. of Cylinder 3regulation ASSC (pressure switch)noise lvl. 80 db(A)Mounting on base
1
-
-
... More
Supply & fixing air compressure for 7 bar make ingersoll rand/anest iwata/air care) CFM Technology based 100% oil free air cooled type two stage air compreesure having piston & piston rings of composite resin material of high performace, durable design seizure free, long overhaul cycle & high tempreture resistence ( up to 300 deg CO low noise and low vibration lvl. base plate mounted air compressure completwe with electrical.
Motar 15HPPower supply 3 Phase/50HzNo. of stage Twopiston 1619 LPM/57.18 Displacement CFMworking pressure 8.5kg/cmsqNo. of Cylinder 3regulation ASSC (pressure switch)noise lvl. 80 db(A)Mounting on base
1
-
-
... More
Supply installation testing commissioning of surgical air outlets. Fully compiles and meets with, HTM 2022 CE certified.
25
-
-
... More
VACUM CENTRAL SYSTEM
Supply, installation, & testing commissioning, of vacum system 15(v) 3 nos. vacum pump, cap 60mm Hg with suitable size motor electrical/mechanical protection realy automatic control system air reservoir 4500 ltr. Filter, valve filtering & inter connecting ms/copper piping etc. complete as per specification. make : ingersoll rand. HTM 2022 standard CE certified.
1
-
-
... More
Supply installation & testing commissioning of ward vaccum unit with jar capacity of 1000 ml or more each fully compiles & meets with HTM 2022 standard. CE certified.
350
-
-
... More
Supply installation & testing commissioning of Theater suction unit with jar capacity of 1000 ml or more each fully compiles & meets with HTM 2022 CE certified.
10
-
-
... More
Vaccum HP/LP antistatic tube fully compiles & meets with, HTM 2022 standard CE Certified.
950
-
-
... More
CARBON DIE OXIDE SYSTEM
Supply installation & testing commissioning of 4+4 size of CO2 manifold complete with 8 NO pig tail pipes & 8 nos. of non return valve with middle frame complete in all aspect fully compiles & meets with, HTM 2022 standard CE certified.
1
-
-
... More
Supply installation & testing commissioning of 2X2 Cylinder CO2 emergency manifold with 4 nos. of tail pipe & 4nos. Of non- return valve with middle frame complete in all aspect fully compiles & meets with HTM 2022 standard. CE Certified.
1
-
-
... More
Supply installation & testing commissioning of fully automatic CO2 control panel 500 LPM fully compiles control panel 500 LPM fully compiles & meets with HTM 2022 standard . CE Certified.
1
-
-
... More
Supply installation & testing commissioning of CO2 gas outlets, with matching stainless steel probe/adaptor complete in all aspect fully Compiles & meets with HTM 2022 STANDARD CE certified
25
-
-
... More
Medical grade copper tube/pipe the pipe distribution system shall use copper pipe manufactured from phasphorous die oxidiesd non arsenical copper to BS EN 1412:1996 grade CWO24A (Cu-DHP), manufactured to metric outside diameters and having mechanical properties in accordence with BS EN 13348:2008 in either R250 (half hard) or R290 (hard). degreasing of pipe shall be such that there is less than 20mg/m2 (0.002mg/cm2) of hydrocarbon on the degreased surface when tested by the method specified BS en 13348:2008. The copper pipes should be Lloyd's/Bsi/TUV tested & certifief for the chemical properties as per EN 13348 standard.
Copper Pipes of 12mm ODX 0.7mm thk
1250
-
-
... More
Copper Pipes of 15mm ODX 0.9mm thk
750
-
-
... More
Copper Pipes of 22mm ODX 0.9mm thk
900
-
-
... More
Copper Pipes of 28mm ODX 0.9mm thk
1000
-
-
... More
Copper Pipes of 35mm ODX 0.9mm thk
400
-
-
... More
Copper Pipes of 54mm ODX 1.2mm thk
100
-
-
... More
Copper Pipes of 76mm ODX 1.5mm thk
50
-
-
... More
ZONAL VALVE BOXES UNIT FULLY COMPILES & MEETS WITH, HTM 2022 STANDARD.
2 Gases (1gas + 1 Vaccum)
10
-
-
... More
3 Gases (2gas + 1 Vaccum)
10
-
-
... More
4 Gases (3gas + 1 Vaccum)
5
-
-
... More
6 Gases (5gas + 1 Vaccum)
5
-
-
... More
AREA ALARMS. FULLY Compiles & meets with, HTM 2022 standards
Area alarm 2 Gases (1gas + 1 Vaccum)
6
-
-
... More
Area alarm 3 Gases (2gas + 1 Vaccum)
6
-
-
... More
Area alarm 5 Gases (4gas + 1 Vaccum)
3
-
-
... More
Area alarm 6 Gases (5gas + 1 Vaccum)
3
-
-
... More
line Isolation valves fully compiles & meet with HTM, 2022 standard.
15mm line isolation valve
30
-
-
... More
22mm line isolation valve
30
-
-
... More
28mm line isolation valve
10
-
-
... More
35mm line isolation valve
7
-
-
... More
54mm line isolation valve
4
-
-
... More
76mm line isolation valve
2
-
-
... More
DESCRIPTION OF THE ITEMS
Vertical bed head wall panel: The construction of the wall section is made of extruded aluminium. The extruded aluminium structural lower channel will included a vertical integrate equipment mounting track to support to optical track mounted equipment. Optional equipment like I.V. Jooks, infusion pole, utility basket, monitor tray etc. can be installed in to into the track at any location along the extruded aliminium channel. Gas outlet/switch socket/monitor socket/nurse call system can be fitted on middle portion of the bed console unit after cutting the aluminium sheet as per hospital requirements. (2100 mm length CE Certified).
20
-
-
... More
Horizontal Bed Head Wall Panel. It shall be constructed from high quality annodized aluminiuym profiles in one piece. It should complet through piping to the central connection point by means of medical grade copper pipes compiels to EN 13348 Standards. (1600 mm CE Certified)
125
-
-
... More
HVAC WORK
AHRI Certified Rotary Screw Water Cooled Chilling Machine With Air Cooled VFD, Active Harmonic Filter & Microprocessor Based Control Panel (Capacity - As Detailed Below)
Supply, installation, testing and commissioning of Rotary Screw Water cooled water Chilling M/C of 300 TR actual capacity at below mentioned operating conditions with R - 134 A refrigerant, open / semihermatic / hermatically sealed compressor, driven by suitable KW Sq. Cage induction motor complete with variable speed drive, watercooled shell & tube condenser, insulated shell and tube flooded chiller, flow switches at condenser & chiller outlet, refrigerant piping, Refrigerant and Oil (First Charge), Microprocessor based control panel, chiller / floor mounted air cooled VSD with IP 54 (NEMA 12) enclosure, active harmonic filters (THDi current less than 5%) & accessories etc. Motor shall be suitable for 415 volts ± 10%, 50Hz ± 5 %, three phase A.C. supply. The chilling m/c as described above shall be in line with specifications & shall have interface card compatible with BMS system. Actual capacity of chillers shall be based the parameters given below & power consumption / TR at 100%, 75%, 50% & 25% load shall be based on AHRI Condition. Part I Equipment.
Condenser CDW IN - 32.22º C. CDW OUT - 36.38º C. FLOW - 4536 LPM Fouling Factor (MKS) - 0.0002 Pressure Drop Max - 6.5 Meter CONTINUED......
-
-
-
... More
Chiller CHW IN - 12.22º C. CHW OUT - 6.67º C. FLOW - 2721 LPM Fouling Factor (MKS) - 0.0001 Pressure Drop Max - 6.5 Meter COP At AHRI Condition - 5.8 (Min) Power Consumption Of Chiller / TR At Tender Condition Mentioned Above (Max) - 0.70
The price quoted for supply, installation, testing & commissioning of Rotary Screw Water Chilling Unit shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees. 400 TR Actual Capacity (AHRI Certified Chiller)
4
-
-
... More
Condenser Water Pumps Set
Supply, installation, testing and commissioning of Vertical Inline split coupled condenser water centrifugal pump sets with bronze impeller for condenser water recirculation complete with TEFC (IE2) Sq. Cage induction motor with class "F" insulation, SS Shaft Grade 416, bronze impeller, factory fitted mechanical seal etc. conforming to technical specification & as per following parameters. For 400 TR Chiller, LPM - 6048, Head - 24 to 30 Meter, Pump Efficiency (Min) - 80%, Motor HP - As per Manufacturer Selection
4
-
-
... More
Primary Chilled Water Pumps Set
Supply, installation, testing and commissioning of Vertical Inline split coupled chilled water centrifugal pump sets with bronze impeller for chilled water recirculation complete with TEFC (IE2) Sq. Cage induction motor with class "F" insulation, SS Shaft Grade 416, bronze impeller, factory fitted mechanical seal etc. conforming to technical specification & as per following parameters. The chilled water pumps shall also include the cost of thermal insulation with factory laminated EPDM / Nitrile Rubber insulation. For 400 TR Chiller, LPM - 3628, Head - 12 to 15 Meter, Pump Efficiency (Min) - 75%, Motor HP - As per Manufacturer Selection
4
-
-
... More
Secondary Chilled Water Pump Sets with VFD
Supply, installation, testing and commissioning of Vertical Inline split coupled chilled water centrifugal pump sets with bronze impeller for chilled water recirculation complete with TEFC (IE2) Sq. Cage induction motor with class "F" insulation, SS Shaft Grade 316, bronze impeller, factory fitted mechanical seal, Suitable HP variable frequency drive (VFD) with IP 55 (NEMA 12) enclosure, active harmonic filters (THDi current less than 5%) suitably interfaced with other system components, etc. conforming to technical specification & as per following parameters. The chilled water pumps shall also include the cost of thermal insulation with factory laminated EPDM / Nitrile Rubber insulation. Secondary chilled water pumps shall be conforming to the specifications of variable speed pumping system. For 400 TR Chiller, LPM - 3628, Head - 18 to 22 Meter, Pump Efficiency (Min) - 80%, Motor HP - As per Manufacturer Selection
4
-
-
... More
Pump Logic Controller for Variable Speed Pumping System (Suitable for Maximum 5 Pumps)
Supply, installation, testing and commissioning of dedicated microprocessor based pump logic controller, parallel pumping software duly downloaded, Differential Pressure Sensor / Transmitters, suitably interfaced with other system components, hand / auto macro designed for pumping application, compatibility of I/O signals etc complete with other accessories as required.
1
-
-
... More
FRP Induced Draft Cooling Tower
Supply, installation, testing and commissioning of FRP Induced draft, cross / counter flow, 1 to 4 fan as required, direct / gear driven, site erected cooling tower of capacity as mentioned below based on the parameters given below and complete with PVC Fill, Louvers, Drift Eliminator, Weather Proof IP 55 TEFC Motor (IE2), Propeller Fan, FRP Basin with additional sump in the bottom of the basin on every outlet point to avoid vortex formation in the condenser water pipe line, Hot dip galvanised Steel Ladder, Stainless Steel hardware including nut, bolt, washer etc. The cooling tower shall conform to technical specifications given in the tender. The maximum allowable sound power at a distance of 1 M from the cooling Tower shall be less than 75 dB. Tower fan motor shall be suitable for VFD operation and operation of VFD system shall be based approach of cooling tower. Water Flow - 15.12 LPM (4 GPM / TR)
Designed Wet Bulb Temperature - 28.3 °C
Water Inlet / Outlet Temperature - 36.38 °C / 32.22 °C
Cooling Tower Basin Height - 300.0 MM 400 TR Cooling Tower
1
-
-
... More
VFD System For Cooling Tower Supply, installation, testing and commissioning of VFD having IP-54/55 enclosure from factory with heat sink for each cooling tower fan motor of suitable HP with VFD, control panel & other accessories as required. VFD control panel shall be installed in the AC Plant Room. The system shall be complete with variable frequency drive (VFD) suitably interfaced with other system components, hand / auto macro designed, 01 no. dedicated microprocessor based logic controller, software duly downloaded, tempearture Sensor / Transmitters, interfacing amongst all components and compatibility of I/O signals etc complete with other accessories as required. Operation of VFD system shall be based approach of cooling tower. (Excluding VFD all other parts / accessories as mentioned above shall be common for 1 Set of AC Plant / System)
VFD System For Cooling Tower of Capacity (300 to 500 TR)
1
-
-
... More
Pressurised Expansion Tank (Chilled Water)
Supply, installation, testing and commissioning of pressurised insulated chilled water Expansion Tank of capacity as given below made of MS Sheet & finished with epoxy enamel, having interchangeable butile - EPDM membrane, operating pressure 10 Kg/cm² or as actually required, suitable HP pump, pressure switch, valves, make up water connection, overall height of the tank shall be limited to 3.0 meter & the tank shall be complete with necessary controls etc. as required to make it fully functional. The capacity of each tank shall be as detailed below. Capacity of tank is for the guidance only & AC Contractor to quote as per actual requirement. 4000 Litres
1
-
-
... More
Hot Water Generator For Winter Heating Supply, installation, testing and commissioning of electrically operated Hot Water Generator of capacity as mentioned below in multiple bank complete with PLC based microprocessor controls, electrical panels etc. confirming to technical specifications section.
Inlet Water Temperature 50 °C
Outlet Water Temperature 55 °C
450 KW
2
-
-
... More
Hot Water Pump Sets Supply, installation, testing and commissioning of Vertical Inline hot water centrifugal pump sets with bronze impeller for hot water recirculation complete with TEFC (IE2) Sq. Cage induction motor with class "F" insulation, SS Shaft Grade 316, bronze impeller, factory fitted mechanical seal, flexible pipe connector at inlet and outlet, Suitable HP variable frequency drive (VFD) with IP 54 (NEMA 12) enclosure, active harmonic filters (THDi current less than 5%) suitably interfaced with other system components, etc. conforming to technical specification & as per following parameters. The hot water pumps shall also include the cost of thermal insulation with factory laminated EPDM / Nitrile Rubber insulation. Hot water pumps shall be conforming to the specifications of variable speed pumping system. For 450 to 540 KW Hot Water Generator, LPM - For 5°C Delta T, Head - 22 to 30 Meter, Pump Efficiency (Min) - 80%, Motor HP - As per Manufacturer Selection
2
-
-
... More
Pump Logic Controller for Variable Speed Pumping System
Supply, installation, testing and commissioning of dedicated microprocessor based pump logic controller, parallel pumping software duly downloaded, Differential Pressure Sensor / Transmitters, suitably interfaced with other system components, hand / auto macro designed for pumping application, compatibility of I/O signals etc complete with other accessories as required.
1
-
-
... More
Double Skin Floor Mounted AHU with CC Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted (Horizontal / Vertical to suit site), fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside with blower, blower section and blower motor TEFC (IE2) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 4 Row cooling coil made of Aluminium finned Copper tube with coil section, Copper Header, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor, belt drive etc. without face and bypass dampers.
The AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The AHU shall be with one set of commissioning filter which shall be replaced with actual filter. 17,000 CFM, 60 mm St. Pr., 6 Row CC,
1
-
-
... More
Double Skin Celing Mounted AHU with CC Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted (Horizontal / Vertical to suit site), fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside with blower, blower section and blower motor TEFC (IE2) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 4 Row cooling coil made of Aluminium finned Copper tube with coil section, Copper Header, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor, belt drive etc. without face and bypass dampers.
The AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The AHU shall be with one set of commissioning filter which shall be replaced with actual filter. 9000 CFM, 60 mm St. Pr., 6 Row CC,
2
-
-
... More
8000 CFM, 60 mm St. Pr., 6 Row CC,
5
-
-
... More
7500 CFM, 60 mm St. Pr., 6 Row CC,
5
-
-
... More
6500 CFM, 60 mm St. Pr., 6 Row CC,
1
-
-
... More
6000 CFM, 60 mm St. Pr., 6 Row CC,
9
-
-
... More
5000 CFM, 60 mm St. Pr., 6 Row CC,
3
-
-
... More
4500 CFM, 60 mm St. Pr., 6 Row CC,
3
-
-
... More
4000 CFM, 60 mm St. Pr., 6 Row CC,
11
-
-
... More
3000 CFM, 60 mm St. Pr., 6 Row CC,
3
-
-
... More
2000 CFM, 60 mm St. Pr., 6 Row CC,
3
-
-
... More
1800 CFM, 60 mm St. Pr., 6 Row CC,
1
-
-
... More
1000 CFM, 60 mm St. Pr., 6 Row CC,
1
-
-
... More
800 CFM, 60 mm St. Pr., 6 Row CC,
2
-
-
... More
Double Skin Celing Mounted AHU with CC + HC + UL Certified CoiloTron Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit Celing mounted (Horizontal / Vertical to suit site), fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside with blower, blower section and blower motor TEFC (IE2) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 4 / 6 Row cooling coil and 2 row heating coil made of Aluminium finned Copper tube with coil section, Copper Header, pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, CoiloTron section with UL 1995 ABQK listed UL 2043 certified CoiloTron, UV lamp life shall not be less than 11000 hours, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor, belt drive etc. without face and bypass dampers.
The AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The AHU shall be with one set of commissioning filter which shall be replaced with actual filter. 2,500 CFM, 45 mm St. Pr., 4 Row CC, 2 Row HC, 1 x 300 Dia Fan, 1.1 Kw Fan Motor or as required
9
-
-
... More
3,000 CFM, 45 mm St. Pr., 4 Row CC, 2 Row HC
3
-
-
... More
3,500 CFM, 45 mm St. Pr., 4 Row CC, 2 Row HC
6
-
-
... More
4,000 CFM, 45 mm St. Pr., 4 Row CC, 2 Row HC
1
-
-
... More
4,500 CFM, 45 mm St. Pr., 4 Row CC, 2 Row HC
1
-
-
... More
5,000 CFM, 45 mm St. Pr., 4 Row CC, 2 Row HC
1
-
-
... More
5,500 CFM, 45 mm St. Pr., 4 Row CC, 2 Row HC
1
-
-
... More
6,000 CFM, 50 mm St. Pr., 4 Row CC, 2 Row HC
1
-
-
... More
7,000 CFM, 50 mm St. Pr., 4 Row CC, 2 Row HC
4
-
-
... More
Fan Coil Unit
Supply, installation, testing and commissioning of GI powder coated fan coil units complete with fan, 3 speed motor, 3 row deep cooling coil, 1 row deep heating coil, aluminium filters, filter box, double sandwitched insulated tray, ball valve with strainer, copper connection, rotary switch, supporting arrangement, electrical wiring etc. The fan shall be selected for 5 - 8 mm external static pressure as required & as per approved drawing. The complete fan coil unit shall have acoustically lined casing & shall be in line with the standard specification. The capacity of fan coil units shall be as follows. The FCU shall be with one set of commissioning filter which shall be replaced with actual filter.
1.0 TR
94
-
-
... More
1.5 TR
70
-
-
... More
2.0 TR
20
-
-
... More
2.5 TR
32
-
-
... More
3.0 TR
21
-
-
... More
4.0 TR
8
-
-
... More
Thermostat for FCU
Supply, installation, testing and commissioning of automatic control for Fan Coil Units consisting of pressure independant balancing cum two way control valve (already quantified herein) & digital thermostat, which will have provision of setting of room temperature, setting of fan speed (High, Medium, Low). The quoted price of thermostat shall include the cost of 20mm MS conduits, control cabling, MS Box etc as required.
245
-
-
... More
Thermostat for AHU
Supply, installation, testing and commissioning of digital display type thermostat for various air handling Units. Temperature Sensor of AHU shall be in BMS Part. The thermostat shall have provision of setting of space temperature & RH and shall display the both. The quoted price of thermostat / humidistat shall include the cost of 20mm MS conduits, control cabling, MS Box etc as required. Cooling / heating thermostat for air-handler.
89
-
-
... More
Snap Acting Humidistat at air-handler.
5
-
-
... More
Chilled / Condenser / Hot Water Piping
Supply, installation, testing and commissioning of bare chilled / condenser / Hot water piping of M.S 'Heavy' Class complete with fittings like elbows, tees, reducers, bends, MS flanges, supports, welding, painting etc. but excluding valves as required conforming to IS:1239 / 3589 & technical specification. All outdoor condenser water piping shall be treated with Zinc Cromate Primer plus two coats of Epoxy Paints.
19 mm dia pipe
550
-
-
... More
25 mm dia pipe
1500
-
-
... More
32 mm dia pipe
575
-
-
... More
40 mm dia pipe
345
-
-
... More
50 mm dia pipe
430
-
-
... More
65 mm dia pipe
475
-
-
... More
80 mm dia pipe
750
-
-
... More
100 mm dia pipe
1100
-
-
... More
125 mm dia pipe
45
-
-
... More
150 mm dia pipe
65
-
-
... More
200 mm dia pipe
155
-
-
... More
250 mm dia pipe
25
-
-
... More
300 mm dia pipe
40
-
-
... More
350 mm dia pipe
55
-
-
... More
400 mm dia pipe
25
-
-
... More
450 mm dia pipe
50
-
-
... More
Motorised Butterfly Valves
Supply, installation, testing and commissioning of motorised on / off butterfly valves with modulating motor in return chilled & condenser water line of each chiller, condenser & cooling tower operated through BMS & of following sizes: 32 mm dia
33
-
-
... More
40 mm dia
11
-
-
... More
50 mm dia
19
-
-
... More
65 mm dia
19
-
-
... More
80 mm dia
7
-
-
... More
100 mm dia
1
-
-
... More
125 mm dia
1
-
-
... More
150 mm dia
1
-
-
... More
200 mm dia
1
-
-
... More
Valves & Strainer
Supply, installation, testing and commissioning of following valves in chilled / condenser water line as per specification given in the tender.
Globe Valves
32 mm dia
90
-
-
... More
40 mm dia
25
-
-
... More
Butterfly Valves
100 mm dia
4
-
-
... More
125 mm dia
4
-
-
... More
150 mm dia
2
-
-
... More
200 mm dia
4
-
-
... More
250 mm dia
1
-
-
... More
300 mm dia
1
-
-
... More
350 mm dia
1
-
-
... More
400 mm dia
1
-
-
... More
450 mm dia
1
-
-
... More
500 mm dia
1
-
-
... More
600 mm dia
1
-
-
... More
Check Valves
100 mm dia
1
-
-
... More
125 mm dia
1
-
-
... More
150 mm dia
1
-
-
... More
200 mm dia
2
-
-
... More
Y-strainer
200 mm dia
1
-
-
... More
250 mm dia
1
-
-
... More
Pot Strainer
Supply, installation, testing and commissioning of Pot - Strainer of the following sizes confirming to tender specification.
300 mm dia
1
-
-
... More
350 mm dia
1
-
-
... More
Thermometer
Supply, installation, testing and commissioning of alcohal fitted 'V' form thermometer of approved make conforming to tender specifications.
6
-
-
... More
Pressure Gauges
Supply, installation, testing and commissioning of pressure guage of approved make of dia 150 mm conforming to tender specifications.
35
-
-
... More
Condensate Drain Piping
Supply, installation, testing and commissioning of condensate drain water piping of GI 'Medium' class complete with fittings like elbows, tees, reducers, bends, MS flanges, supports, welding, painting etc. as required conforming to tender specifications and of following sizes. 50 mm dia pipe
200
-
-
... More
Pipe Insulation (Nitrile Rubber)
Supply & installation of Insulation on chilled water piping with closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive of specified thickness in the tender specification and suitable for indoor / outdoor application as required at site. Complete pipe insulation shall have 200 g/m² factory laminated, treated woven Glass Cloth coating for mechanical and UV protection. (Up to 100 mm pipe dia factory laminated nitrile rubber pipe section shall be used & above 100 mm pipe dia factory laminated nitrile rubber sheet shall be used
Indoor Pipe Insulation
19 mm dia pipe, Insulation Thickness - 25 mm
550
-
-
... More
25 mm dia pipe, Insulation Thickness - 25 mm
1500
-
-
... More
32 mm dia pipe, Insulation Thickness - 25 mm
575
-
-
... More
40 mm dia pipe, Insulation Thickness - 25 mm
345
-
-
... More
50 mm dia pipe, Insulation Thickness - 25 mm
430
-
-
... More
65 mm dia pipe, Insulation Thickness - 32 mm
475
-
-
... More
80 mm dia pipe, Insulation Thickness - 32 mm
750
-
-
... More
100 mm dia pipe, Insulation Thickness - 32 mm
1100
-
-
... More
125 mm dia pipe, Insulation Thickness - 32 mm
45
-
-
... More
150 mm dia pipe, Insulation Thickness - 32 mm
65
-
-
... More
200 mm dia pipe, Insulation Thickness - 32 mm
155
-
-
... More
250 mm dia pipe, Insulation Thickness - 38 mm
25
-
-
... More
300 mm dia pipe, Insulation Thickness - 38 mm
40
-
-
... More
350 mm dia pipe, Insulation Thickness - 38 mm
55
-
-
... More
400 mm dia pipe, Insulation Thickness - 38 mm
25
-
-
... More
450 mm dia pipe, Insulation Thickness - 38 mm
50
-
-
... More
Outdoor Pipe Insulation
40 mm dia pipe, Insulation Thickness - 32 mm
125
-
-
... More
50 mm dia pipe, Insulation Thickness - 32 mm
190
-
-
... More
65 mm dia pipe, Insulation Thickness - 38 mm
275
-
-
... More
Manual Blancing Valves
100 mm dia
2
-
-
... More
125 mm dia
3
-
-
... More
150 mm dia
4
-
-
... More
200 mm dia
4
-
-
... More
250 mm dia
1
-
-
... More
300 mm dia
1
-
-
... More
350 mm dia
1
-
-
... More
400 mm dia
1
-
-
... More
Pipe Insulation (Expanded Polystyrene & Aluminium Cladding)
Supply & fixing of Insulation on chilled water piping with TF quality Expanded Polystyrene pre-moulded pipe section having density of 20 Kg/m³ & of below specified thickness suitable for indoor / outdoor application as required at site duly wrapped with double layer of 400G polythene sheet & aluminium cladded with 24G aluminium sheet using hand operated roller / grooving machine. Pipe shall have first coat of Zinc chromate primer and two coats of cold setting adhesive CPRX compound on pipes.
100 mm dia pipe, Insulation Thickness - 50 mm
1
-
-
... More
125 mm dia pipe, Insulation Thickness - 50 mm
1
-
-
... More
150 mm dia pipe, Insulation Thickness - 50 mm
1
-
-
... More
200 mm dia pipe, Insulation Thickness - 75 mm
155
-
-
... More
250 mm dia pipe, Insulation Thickness - 75 mm
25
-
-
... More
300 mm dia pipe, Insulation Thickness - 75 mm
40
-
-
... More
350 mm dia pipe, Insulation Thickness - 75 mm
55
-
-
... More
400 mm dia pipe, Insulation Thickness - 75 mm
25
-
-
... More
450 mm dia pipe, Insulation Thickness - 75 mm
25
-
-
... More
Auto Air Vent
Supply, installation, testing and commissioning of auto air vent valve of following sizes and complying with tender specification.
10 mm dia auto air vent valve
10
-
-
... More
19 mm dia auto air vent valve
25
-
-
... More
25 mm dia auto air vent valve
110
-
-
... More
Expansion Tank Chilled / Hot Water Circuit
Supply, installation , testing and commissioning of expansion tank for chilled water circuit of size 1.0mt x 1.0mt x 1.0 mt made out of 5 mm MS sheet duly epoxy coated & insulated as per specifications duly duly aluminium cladded with 22 G aluminum sheet complte with float valve, over flow & make up connections.
1
-
-
... More
Rectangular GI Ducting (Factory Made - L Shape)
Supply, fabrication, installation and testing of G.S.S. sheet metal ducting complete with Spliter Damper, duct damper, vanes etc. as required & as per specifications & as per approved shop drawings.
24 G (Up To 750 mm)
800
-
-
... More
22 G (751 to 1500 mm)
250
-
-
... More
20 G (1501 to 2250 mm)
125
-
-
... More
18 G (Above 2250 mm)
45
-
-
... More
Site Fabricated GI Duct
Supply, fabrication, installation & testing of sheet metal ducting complete with Spliter Damper vanes as required and as per ISI specifications and as per approved shop drawings.
24 G (Up To 750 mm)
125
-
-
... More
22 G (751 to 1500 mm)
750
-
-
... More
20 G (1501 to 2250 mm)
125
-
-
... More
Site Fabricated Aluminium Ducting Supply, fabrication, installation & testing of Aluminium sheet metal ducting duly polysulphide sealed complete with Spliter Damper, vanes etc. as required for OT / MRI and as per ISI specifications and as per approved shop drawings. 22 G (Up To 750 mm)
120
-
-
... More
20 G (751 to 1500 mm)
150
-
-
... More
Duct Accoustic Lining
Supplying and fixing of acoustic lining of duct with fibre glass rigid board of density 48 Kg/m³ sealed in fibre glass tissue paper and covered with 0.5 mm thick perforated aluminium sheet and conforming to specification given in the tender.
12 mm thick fibre glass rigid board.
400
-
-
... More
25 mm thick fibre glass rigid board.
250
-
-
... More
Internal Duct Thermal Insulation with XLPE
Supplying and fixing of external thermal insulation on ducts with Closed Cell Polyethylene (XLPE) insulation, tape & adhesive (pidilite SR -998) as required of following thickness. 9 mm thick with aluminium metalized surface
1900
-
-
... More
External Duct Thermal Insulation with Thermocole
Supplying and fixing of external thermal insulation on exposed ducts with 50 mm thick expanded polystyrene of density 20 Kg/m³ duly aluminium claded with 26 G aluminium sheet as per specification given in the tender.
120
-
-
... More
Fire Dampers
Supply, installation & testing of Duct / Wall mounted GI Fire Dampers actuated with the help of 24 V electric actuator and as per specifications excluding actuator.
75
-
-
... More
Damper Actuator
Supply, installation and testing of Motorised Spring Return Actuator for devices upto 0.8 sq. metre with with control panel & temperature sensor.
75
-
-
... More
Grilles, Diffusers, VCD
Supply, installtion and testing of Powder coated Aluminium extruded grills / diffusers as per specifications given in tender and of following sizes. Single louvered supply / return air registers (Grills)
145
-
-
... More
Supply / return square ceiling air terminals (diffusers) with perforated mettalic surface.
25
-
-
... More
Fresh / Exhaust air louvers with bird screen & damper
25
-
-
... More
Volume control GI Dampers to be provided in supply & Exhaust air registers / terminals.
75
-
-
... More
Fixed bar linear air register of following sizes
100 mm
35
-
-
... More
150 mm
45
-
-
... More
200 mm
15
-
-
... More
Slot linear air diffusers of following sizes:
2 Slot
12
-
-
... More
Acoustic Insulation of AHU / Fan / Plant Room Supplying & fixing of acoustic insulation on four walls & ceiling of AHU / Fan / DG / AC Plant Rooms with 50 mm thick fibre glass of density 32 Kg/m³ fixed in square frame box of size 610 x 610 mm, frame made of 24 G GI sheet of size (25 - 50 - 50 - 50 - 25 mm) coverd with fibre glass tissue paper and finally finished with 0.5mm thick perforated aluminium sheet & conforming specification. All vertical & horizontal joints to be sealed with 25 mm wide 1.0 mm thick aluminium beading.
AHU / Fan Room / AC Plant Room - 50 mm Thick (As Per Approved Area In Shop Drg.)
600
-
-
... More
Any Additional Items whereever required will be from the APWD Schedule of Rates (S.O.R) for Civil, Sanitary & Water Supply and electrical works including service connection etc. for 2013-14. Rates to be quoted at par or on flat percentage basis ie above/ below the APWD S.O.R. 2013-14 for Civil & Sanitary & Water Supply AND ELECTRICALworks for any additional items not included in the above items. The amount for this item will be calculated out at per or percentage above/ below whichever is quoted by the bidder over the amount against this items.
Amount: Rs. 15,49,825.91
1549825.91
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements