Public Works Building And NH Department Tender
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Costs
EMD
₹ 39,63,627Document Cost
₹ 20,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWBNH_37637_1Bid Award Id
ViewTender No
I/584741/2024 Dated 11-06-2024Tender Authority
Public Works Building And NH Department ViewPurchaser Address
-Website
http://https://pwdbnh.assam.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Extra for scrapping, cleaning and straightening reinforcement from
R.C.C. or R.B. work.
125.26
-
-
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
In cement mortar
25.65
-
-
... More
Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured):
From brick work in cement mortar
2.3
-
-
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
Of area 3 sq. metres and below
5
-
-
... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :
Of area 3 sq. metres and below
2
-
-
... More
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
1258
-
-
... More
Extra for dismantling trusses, rafters, purlins etc. of steel work for
every additional span of one metre or part thereof beyond 10 metres
37.65
-
-
... More
Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres.
48.56
-
-
... More
Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within
50 metres lead
16.52
-
-
... More
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet
75.56
-
-
... More
Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap.
2
-
-
... More
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
1
-
-
... More
Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres
Above 150 mm diameter
1
-
-
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
25.63
-
-
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading,transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
67.8
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil.
4393.89
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil.
Pipes, cables etc, not exceeding 80 mm dia.
86.52
-
-
... More
Close timbering over areas including strutting, shoring and
packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered) :
Depth not exceeding 1.5 m
43.26
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
7394
-
-
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
7398
-
-
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
All kinds of soil
1086.15
-
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
1803.1
-
-
... More
Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.
All kinds of soil
2863.67
-
-
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
2863.67
-
-
... More
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
1958.23
-
-
... More
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.
Beyond 30 cm girth upto and including 60 cm girth
2
-
-
... More
Beyond 60 cm girth upto and including 120 cm girth
1
-
-
... More
Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
52.3
-
-
... More
Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge.
785.26
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:3:6 (1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20mm nominal size derived from natural sources).
99.5
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:
1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
50
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for
columns.
253.5
-
-
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)
50.52
-
-
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
55
-
-
... More
Extra for laying concrete in or under water and/or liquid mud including cum per cost of pumping or bailing out water and removing slush etc.complete.
36.21
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement
: 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling & dressing & finishing the top smooth.
258.25
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)
779.96
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu-
ral sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
1720.19
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
128730
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level
Thermo-Mechanically Treated bars of grade Fe-500D or more.
198802.45
-
-
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
264.24
-
-
... More
Extra for laying reinforced cement concrete in or under foul positions.
178.75
-
-
... More
Centering and shuttering including strutting, propping etc. and
removal of form for :
Foundations, footings, bases of columns, etc. for mass concrete.
279
-
-
... More
Suspended floors, roofs, landings, balconies and access platform.
202
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
222
-
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts.
173
-
-
... More
Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.
202
-
-
... More
Edges of slabs and breaks in floors and walls
Under 20 cm wide
210
-
-
... More
Weather shade, Chajjas, corbels etc., including edges.
185
-
-
... More
Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick
283
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick
467
-
-
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
Suspended floors, roofs, landing, beams and balconies
(Plan area to be measured)
3722.77
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
Cement mortar 1:4 (1 cement : 4 coarse sand)
661.44
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
Cement mortar 1:4 (1 cement : 4 coarse sand)
1568.22
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :
cement mortar 1:4 (1 cement : 4 coarse sand)
1079.44
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
Cement mortar 1:4 (1 cement :4 coarse sand)
5511.56
-
-
... More
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry (with F.P.S. bricks).
4251.44
-
-
... More
Extra for laying brick work in or under foul position.
217.28
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
5256.6
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
Sal wood
3.11
-
-
... More
Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured)
5.0 mm thick instead of 4 mm thick.
60.55
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
615.04
-
-
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
220
-
-
... More
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured):
Rectangular or square
25.25
-
-
... More
Glass sheet (Pin headed) 4 mm thick
24.56
-
-
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
1251.14
-
-
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming
1.5 mm thick
412.74
-
-
... More
Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete :
250x10 mm
65
-
-
... More
Providing and fixing bright finished brass door latch with necessary screws etc. complete :
300x16x5 mm
2
-
-
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
108
-
-
... More
Providing and fixing bright finished brass handles with screws etc.
complete:
125 mm
78
-
-
... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
108
-
-
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
108
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Hot finished welded type tubes
2020
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates
and similar works.
1032
-
-
... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
80
-
-
... More
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in charge.
10 x 80 mm
84
-
-
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
50.23
-
-
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15- 18 microns using self drilling/ self tapping screws complete :
Ridges plain (500 - 600mm)
25.5
-
-
... More
Dry brick on edge soling in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.
3345
-
-
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
40 mm thick with 20 mm nominal size stone aggregate
130.58
-
-
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.
18 mm thick
26.52
-
-
... More
Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete.
30.25
-
-
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles,including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement.
92.38
-
-
... More
Extra for pre finished nosing to treads of steps of marble stone.
148.99
-
-
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
3316.46
-
-
... More
Providing and laying Vitrified tiles in floor with different sizes (thickness
to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).
Size of Tile 600x600 mm
1374
-
-
... More
Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles.
125
-
-
... More
Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc.
71.36
-
-
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
47.26
-
-
... More
Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with :GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.
194
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
(i) Single socketed pipes.
110 mm diameter
248.3
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Coupler
110 mm
15
-
-
... More
Single pushfit Coupler
110 mm
15
-
-
... More
Single tee with door
110x110x110 mm
10
-
-
... More
Single tee without door
110x110x110 mm
12
-
-
... More
Bend 87.5°
110 mm bend
15
-
-
... More
Shoe (Plain)
110 mm Shoe
16
-
-
... More
12 mm cement plaster of mix :
1:4 (1 cement: 4 coarse sand)
4749.44
-
-
... More
15 mm cement plaster on rough side of single or half brick wall
of mix :
1:4 (1 cement: 4 coarse sand)
3118
-
-
... More
20 mm cement plaster of mix :
1:4 (1 cement: 4 coarse sand)
595
-
-
... More
12 mm cement plaster finished with a floating coat of neat cement of mix :
1:3 (1 cement: 3 fine sand)
1906.23
-
-
... More
15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.
718.59
-
-
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.
1826.52
-
-
... More
6 mm cement plaster of mix :
1:3 (1 cement: 3 fine sand)
1371
-
-
... More
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
23
-
-
... More
Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
4058
-
-
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
10163
-
-
... More
Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand):
Flush / Ruled/ Struck or weathered pointing
1010
-
-
... More
Raised and cut pointing
238
-
-
... More
Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine sand):
Flush/ Ruled/ Struck or weathered pointing
278.56
-
-
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. Two or more coats on new work.
4000
-
-
... More
Applying one coat of water thinnable cement primer of approved brand
and manufacture on wall surface :
Water thinnable cement primer
10765.56
-
-
... More
Finishing walls with textured exterior paint of required shade:
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
1407.98
-
-
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
Two coats
6056.75
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
31211
-
-
... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound )
content.
With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50grams/ litre
74.65
-
-
... More
With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
6389.42
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
Two or more coats on new work
1165
-
-
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :
Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @0.75 ltr /10 sqm
3269
-
-
... More
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture
826
-
-
... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
348.56
-
-
... More
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.
New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
1842.42
-
-
... More
Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with aluminium paint of approved brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work :
100 mm diameter pipes
80.68
-
-
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm. depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re roller including making good the undulations etc. and re- rolling the sub grade and disposal of surplus earth lead upto 50 metres.
226.89
-
-
... More
Laying water bound macadam sub-base with brick aggregate and binding material, earth etc. including screening, sorting and spreading to template and consolidation with light power road-roller etc. complete.(payment for brick aggregate and moorum etc. to be made separately)
30.25
-
-
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the
desired density, complete as per specifications and directions of Engineerin- Charge.
With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
36.56
-
-
... More
Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen
hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.)
235.25
-
-
... More
Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS
: 164, on bituminous surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete.
New work (Two or more coats)
165.2
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
25.26
-
-
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
398.58
-
-
... More
Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.
225.65
-
-
... More
Providing and laying Dense Graded Bituminous Macadam using
crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge.
50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
68.59
-
-
... More
Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.
40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) and waste plastic additive @ 8% (percentage by weight of bitumen) prepared in Batch Type Hot Mix Plant of 100- 120 TPH capacity.
30.57
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard china flushing cistern & C.P. flush bend with fittings & C.I. brackets, make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
W.C. pan with ISI marked white solid plastic seat and lid
26
-
-
... More
Providing and fixing one piece construction white vitreous china
squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required :
Single squatting plate with 5 litre P.V.C. automatic flushing cistern
28
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass
pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
36
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board
510x1040 mm bowl depth 250 mm
14
-
-
... More
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.
5
-
-
... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.
(a) 15 mm nominal dia
14
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete.
Flexible pipe
32 mm dia
27
-
-
... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.
48
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
Rectangular shape 453x357 mm
36
-
-
... More
Providing and fixing toilet paper holder :
C.P. brass
12
-
-
... More
Providing and fixing soil, waste and vent pipes :
100 mm dia
Sand cast iron S&S pipe as per IS: 1729
20
-
-
... More
75 mm diameter :
Sand cast iron S&S pipe as per IS: 1729
34
-
-
... More
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :
100 mm dia pipe
8
-
-
... More
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :
For 100 mm dia pipe
195
-
-
... More
For 75 mm dia pipe
230
-
-
... More
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.
Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms
31
-
-
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
27
-
-
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour,
weighing not less than 88 gms.
37
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
15 mm nominal dia Pipes
63.6
-
-
... More
20 mm nominal dia Pipes
95.2
-
-
... More
25 mm nominal dia Pipes
175.25
-
-
... More
32 mm nominal dia Pipes
250.65
-
-
... More
40 mm nominal dia Pipes
260.25
-
-
... More
50 mm nominal dia Pipes
270.85
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
15 mm nominal dia Pipes
470
-
-
... More
20 mm nominal dia Pipes
628
-
-
... More
25 mm nominal dia Pipes
649.25
-
-
... More
32 mm nominal dia Pipes
553.58
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
External work
15 mm nominal dia Pipes
160
-
-
... More
20 mm nominal dia Pipes
145.6
-
-
... More
25 mm nominal dia Pipes
175
-
-
... More
32 mm nominal dia Pipes
288
-
-
... More
40 mm nominal dia Pipes
406
-
-
... More
50 mm nominal dia Pipes
368
-
-
... More
65 mm nominal dia Pipes
215
-
-
... More
80 mm nominal dia Pipes
285.6
-
-
... More
100 mm nominal dia Pipes
538.5
-
-
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
-
-
... More
Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :bricks of class designation 7.5
1
-
-
... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
12
-
-
... More
Providing and fixing brass bib cock of approved quality :
15 mm nominal bore
36
-
-
... More
Providing and fixing brass stop cock of approved quality :
15 mm nominal bore
85
-
-
... More
32 mm nominal bore.
5
-
-
... More
40 mm nominal bore
5
-
-
... More
50 mm nominal bore
3
-
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
15 mm nominal bore
2
-
-
... More
20 mm nominal bore
4
-
-
... More
Providing and fixing brass ferrule with C.I. mouth cover including
boring and tapping the main :
15 mm nominal bore
30
-
-
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :
45 cm length
15 mm nominal bore
100
-
-
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
100 mm diameter
42
-
-
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
32 mm nominal bore
64
-
-
... More
40 mm nominal bore
37
-
-
... More
50 mm nominal bore
29
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
16000
-
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
15 mm nominal bore
32
-
-
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
15 mm nominal bore
60
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
15mm nominal bore
21
-
-
... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm)
of approved make and quality as per direction of Engineer-in-charge.
24
-
-
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
All types of soil
300 mm dia
300
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
100 mm nominal size dia
300
-
-
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
160
-
-
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in- charge.
10
-
-
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
10
-
-
... More
Providing and fixing factory made precast RCC perforated drain covers,having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer- in-charge.
32
-
-
... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
12
-
-
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
100 mm dia
122
-
-
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
100 mm clamp
230
-
-
... More
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).
100 mm dia
350
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
Powder coated aluminium (minimum thickness of powder coating 50 micron)
421.99
-
-
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
Pre-laminated particle board with decorative lamination on both sides
32
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)
27
-
-
... More
With float glass panes of 8 mm thickness (weight not less than 20 kg/ sqm)
545
-
-
... More
Filling the gap in between aluminium frame and adjacent RCC/Brickwork/ Stone Work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge
Upto 5mm depth and 5mm width
52
-
-
... More
Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer- in-charge complete.
710 X 19mm
190
-
-
... More
Providing and fixing aluminium tubular handle bar 32 mm outer dia,
3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.
Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar
190
-
-
... More
Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) :
Screened through sieve of I.S. designation 16 mm
35.65
-
-
... More
Screened through sieve of I.S. designation 4.75 mm
30.26
-
-
... More
Fine dressing of the ground.
527.25
-
-
... More
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
70.56
-
-
... More
Mixing earth and sludge or manure in the required proportion
specified or directed by the Officer-in-charge
156
-
-
... More
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately)
253
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :
Holes 1.2 m dia and 1.2 m deep
1
-
-
... More
Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge.
Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm
with wall thickness of 25.4 mm
2
-
-
... More
Providing Square Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required frame work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge.
Top inner width 35 cm, outer bottom width 25 cm, total height
35 cm and wall thickness 25.4 mm
2
-
-
... More
Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.
125.65
-
-
... More
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.)
Play grounds / Public parks (as per yard stick 1 Mali =2.00Acre).
527.25
-
-
... More
Complete maintenance of shrubs (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.
68
-
-
... More
Providing & fixing of White River (Stone) Pables size of 2" to 2.50" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of
officer in charge.
5
-
-
... More
Providing and applying anti termite treatment of infected trees i/c all branches/leaves by spraying chemical emulsion 0.5% (Chlorpyriphos 20% EC) concentration through power spray machine (@ 100 ml Chlorpyriphos per tree i/c cost of chemical) and as per direction of officer-in-charge.and as per direction of officer-in-charge.
10
-
-
... More
Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in charge.and as per direction of officer-in-charge.
536.45
-
-
... More
Providing and Displaying Acalypha plant Different colour well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size of Earthen Pot/ Plastic Pot bushy plant as per direction of the officer-in-charge.
25
-
-
... More
Providing and Displaying Acalypha red plant well developed with fresh & healthy 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.
15
-
-
... More
Providing and Displaying Ficus resnold piller type Topiary plant well developed with fresh & healthy 210 to 240 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge.
2
-
-
... More
Providing and Displaying of Clerodendron inerme plant of ht. 30 cm to 40 cm multi branched in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.
5
-
-
... More
Providing and Displaying of Iresine herbstii plant, of height 20-30 cm., full of branches well developed in 20 cm size of Earthen Pot
/ Plastic Pot & as per direction of the officer-in-charge..
7
-
-
... More
Providing and Displaying of Wadelia trilobata plant,full of leaves in 15 cm size of Poly bags & as per direction of the officer-in-
charge.
8
-
-
... More
Supply and stacking of Alstonia scholaris plant of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge.
5
-
-
... More
Supply and stacking of Bauhinia blakeana (Kachnar) plant of height 120- 150 cm. in big poly bags of size 25 cm as per
direction of the officer-in-charge.
8
-
-
... More
Supply and stacking of Ficus benjamina (green) plant of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge.
9
-
-
... More
Supply and stacking of Ficus religiosa (Peepal) plant of height 150 165 cm. in big poly bags of size 30 cm as per direction of the
officer-in-charge.
5
-
-
... More
Supply and stacking of Nauclea cadamba (Kadam) plant of height 150-165 cm. in big poly bag of size 25 cm as per direction of the
officer-in-charge.
12
-
-
... More
Supply and stacking of Plumeria acutifolia plant of height 150-
165 cm. with 3-4 branches in big size HDPE bag as per direction of the officer-in-charge.
8
-
-
... More
Supply and stacking of Washingtonia filifea palm plant stem ht. 120-135 cm with 8-10 healthy leaves lush green leaves well developed in big size HDPE Bags as per direction of the officer-in-
charge.
5
-
-
... More
Supply and stacking of plant Caesalpinia pulcherrima species of height 45-60 cm. in earthen pot of size 20 cm as per direction of
the officer-in-charge.
25
-
-
... More
Supply and stacking of plant Calliandra hybrida of height 105-120 cm., well branched, bushy in big size HDPE bag as per direction
of the officer-in-charge.
14
-
-
... More
Supply and stacking of plant Hamelia patens of height 30-45 cm. with 3-4 branches in poly bags of size 20 cm as per direction of the officer-in-charge.
18
-
-
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle.
Drum and brackets for fixing the equipmets on wall.
Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
40m
9
-
-
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :
Gun Metal
10
-
-
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
4 way - 150 mm dia M.S. Pipe
19
-
-
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
4
-
-
... More
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
4
-
-
... More
Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.
150mm dia.
4
-
-
... More
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required :
80mm dia.
1
-
-
... More
100mm dia.
1
-
-
... More
150mm dia.
2
-
-
... More
Supplying, installation, testing & commissioning of deluge valve (to be used for water curtains) UL listed with wet pilot basic trim assembly for DVA with test and alarm, drip and drain valve with water motor gong complete as required.
150 mm dia
2
-
-
... More
Providing, installation, testing & commissioning of electric release trim assembly for deluge wall with two way solelnoid valve, weather proof operation on 24 volts DC supply complete as required
2
-
-
... More
Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required.
68
-
-
... More
Dormitory Bunk Bed 40 mm x 16 gauge CR Square/ Round Pipe Legs and 25 mm X 16 Gauge CR Round Pipe Supports, Steps, Railings. Bed Meterial : 18 Gauge
1 CR Sheet. Bunk Bed Size : 2'6" Width X 6' Length X 6' Height. Finish : Powder Coated. ( Without Mattreses
Cost ), Storage Provided- Without Box, Frame Material
-Iron,Surface Finish -Color Powder Coated Over all Size - 1960W x 762D x 1905 H
150
-
-
... More
Locker Staff commercial steel furniture small door muti-function storage Premium 15 Door High Quality Steel metal Locker. Size 900W x 390D x 1800H. Surface
2 Finishing- Powder Coated, Thickness - Body-0.6mm Self & Door .8mm thick. Knock down and easy assembling construction. Different locks for option.
15
-
-
... More
CONFRENCE TABLE- (14 peoples)- Main Top:- The table top shall be made in 25mm thk Prelam Particle board with 2mm thk PVC Edge Banding on all sides. Understructure:- The understructure
is made up of 18 mm thick prelaminated partical board with PVC Edge banding on all side. Metal Flap:- Epoxy Polyester powder
Coating CRCA metal flap 2 side openeble for Data & Electrical switchs. The metal flap is also provided with bristal for eassy passage of the wires on both site
1
-
-
... More
Mid Back Revolving Chair make with Mesh Finish Fabrics seat and back with Nylon twin caster wheels minimum 5 nos of 50mm,Mechanisim should be Central tilt backrest with lumber support of polypropylene at multilever across back backrest is made of one piece injection moulded frame.SIze should be Overall Height-990mm x Backrest Height-550mm x Backrest width-480mm x Seat Height-520mm x Seat width-480mm xSeat Depth-500mm,Chair as per the certified-All India Occupational Therapists' Association(AIOTA) and BIFMA
25
-
-
... More
Table For office) Size 1200W x 600Dx 750H- Main Top:- The table top
shall be made in 25mm thk Prelam Particle board with 2mm thk PVC Edge Banding on all sides. Understructure:- The understructure
is made up of 18 mm thick prelaminated partical board with PVC Edge banding on all side. With 3 Drawer Pedestal Size 400W x 450D x 725H Top Suppoted made in 18mm Thick PLPB.
12
-
-
... More
Mid Back Revolving Chair make with Mesh Finish Fabrics seat and back with Nylon twin caster wheels minimum 5 nos of 50mm,Mechanisim should be Central tilt backrest with lumber support of polypropylene at multilever across back backrest is made of one piece injection moulded frame.SIze should be Overall Height-1090mm x Backrest Height-590mm x Backrest width-520mm x Seat Height-545mm x Seat width-480mm xSeat Depth-500mm,Chair as per the certified-All India Occupational Therapists' Association(AIOTA) and BIFMA
12
-
-
... More
Steel Sofa providing and fixing visitor sofa of dimension-2325x710x775 with metal perforated seat & back, metal chrome arms & Legs.Stylish and comfortable visitor sofa to give a good welcomes to guests with comfort.
5
-
-
... More
Dining Table Size 2100W x 900D x 750H- Main Top:- The table top shall be made
in 25mm thk Prelam Particle board with 2mm thk PVC Edge Banding on
5 all sides. Understructure:- Epoxy Polyester 6
powder Coating CRCA Square legs of section size 50x50mm, Bar:- Epoxy Polyester powder Coating CRCA Square bar of section size
40x40mm also provide
6
-
-
... More
Dining Table Size 1050W x 900D x 750H- Main Top:- The table top shall be made
in 25mm thk Prelam Particle board with 2mm thk PVC Edge Banding on
6 all sides. Understructure:- Epoxy Polyester 24
powder Coating CRCA Square legs of section size 50x50mm, Bar:- Epoxy Polyester powder Coating CRCA Square bar of section size
40x40mm also provide
16
-
-
... More
Providing And Placing of Double Bed : The Bed shall be of Size – 2060 L x 1370D x 945 H mm. Bed is made of 25mm Thick Prelaminated Particle Board. Head Board is made of 18 mm thick Prelaminated Particle board decorative trims fixed to it. Side tail board is made of 18 mm thick Prelaminated Particle Board. Mattress panels of bed are made of 18 mm thick Prelaminated Particle Board with all exposed edges banded with 0.8 mm Thick PVC edge banding. Construction – Knock Down. Finish 18 mm thick Prelaminated Particle Board
32
-
-
... More
Reception Table Arc Shape Size 1800x600x750/1100mm- Main Top:- The table top shall be made in 25mm thk Prelam Particle board, Understructure:- The understructure is made up of 18 mm thick prelaminated partical board with PVC Edge banding on all side
with 2mm thk PVC Edge Banding on all sides. Modesty:- The modesty shall be made in 18mm thk Prelam Particle board with 2mm thk PVC Edge Banding.
With 3 Drawer Pedestal Size 400W x 450D x 680H made in 18mm Thick PLPB.
3
-
-
... More
Mid Back Revolving Chair make with Mesh Finish Fabrics seat and back with Nylon twin caster wheels minimum 5 nos of 50mm,Mechanisim should be Central tilt backrest with lumber support of polypropylene at multilever across back backrest is made of one piece injection moulded frame.SIze should be Overall Height-850mm x Backrest Height-500mm x Backrest width-480mm x Seat Height-520mm x Seat width-480mm xSeat Depth-500mm,Chair as per the certified-All India Occupational Therapists' Association(AIOTA) and BIFMA
6
-
-
... More
Two Door Wardobes t Storage Unit Size:W- 900mmW x2100 x D-450mm mm Top
made of 18mm PLPB edge bend PVC 2mm thk pasted with hot melt glue by machine . Side and front panel made of
18mm thk PLPB and back panel 9mm thick PLPB
32
-
-
... More
Supplying with fitting and fixing Four Pole 415V Front handle operated On Load Change over switch (IP-20 protection powder painted sheet steel enclosure fitted on angle iron frame of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
400A
1
-
-
... More
CEILING LIGHT-Supplying, installation, testing and Commission of the following indoor Decorative recessed typed mirror optics down lighter luminaries complete with all accessories such as ballast, starter etc. In the false ceiling type Armstrong /Gypsum or similar ceiling mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department 15W, BBS 170 1 X DLED 5000 PSU-WH Phillip make GREEN LED recessed mounted down lighter with latest LED technology. Or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (equivalent WIPRO/ JAQUAR make).
85
-
-
... More
BRACKET LAMP-Supplying fitting and fixing of LIGHTSTRIP model 69113/55 or equivalent LED 0.03 W X 6 (or equivalent as approved by the Deptt.) on the wall/ COVE with all accessories including connection as required complete.
40
-
-
... More
Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make)
Energy efficient 5-star 1200 mm sweep. ORIENT PSPO / Usha / CROMPTON / Havells/ ATC or equivalent make
65
-
-
... More
EXHAUST FAN-Supplying including fitting fixing of following A.C. Wall fan in the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.
(CROMPTON /ORIENT/Havells/USHA or equivalent make) V2 with metal blade, 450 mm sweep
66
-
-
... More
Supply of surface mounting 15 W LED down light with high efficient LED’s,with 50000 burning hours CCT-5700-6500 K,CRI 80, Lumens ≥ 1500, white powder coated aluminium housing with opal diffuser for glare free & uniform lighting, Driver shall be of constant current type, operating temperature from -10 to +45 degree celcius, power factor0.90, rated voltage 220-240V AC working range:- 140-270 V A'c , 50 Hz +_ 5%, AC supply. Surge protection - Inbuilt 2.5KV. Complete in all respect with the
37
-
-
... More
500 Watt Flood Light
4
-
-
... More
32W, BBS 145 1 X DLM 2000 / 840 PSU- E 220-240 V Phillip make LPLUS recessed mounted down lighter with latest LED technology. Or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (equivalent WIPRO/ JAQUAR make).
22
-
-
... More
32/18 Watt wall mounted light
32
-
-
... More
32/18 Watt ceiling light
42
-
-
... More
10 Ltr. Geyser
44
-
-
... More
Supplying with fitting and fixing panel mounting open execution 50KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.5-1, neutral adjustable with earth fault protection and with rotary handle Without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
50 KA 415V 50 Hz 4P MCCB (Schneider, legrand, Siemens make)
400A
1
-
-
... More
Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
25 KA 415V 50 Hz 4P MCCB (Schneider, legrand, Siemens, Indo Asian make) 25A
16
-
-
... More
40A
14
-
-
... More
63A
10
-
-
... More
Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
35/36 KA 415V 50 Hz 4P MCCB (Schneider, legrand, Siemens make) 160A
3
-
-
... More
250A
1
-
-
... More
2.5 sq mm 12 core armoured
80
-
-
... More
MVC 502 1 X MHNTD-150W Phillips make) floodlight luminaries with Cast Aluminium housing & toughened glass cover including separate CG box. Or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (Havells/ WIPRO/ BAJAJ/ CROMPTON / HPL/ SOLAR/ JAQUAR make).
12
-
-
... More
Supplying and fixing of Jaquar or equivalent Philips/ Wipro LED outdoor light fittings complete with all accessories including connection cable, as approved by the Deptt.s etc. as required. LED Garden Light 12W/ 16W
22
-
-
... More
1050 VA Inverter with Battery
24
-
-
... More
Supplying and erection of H.T. stay set complete (Galvanize with 19mm dia x1.8m long stay rod anchor plate of size 30cm x 30cm x6.4 mm thimble stay clamps tube buckle (19mmx 60c 7/3.15 mm dia G.I stay and strain insulation etc. in cement concrete 1:3:6:(1Cement:3Course sand:6graded stone aggregate 40mm nominal size foundation including excavation and refilling etc. as required and as directed by the department.
3
-
-
... More
Supplying and fitting fixing of galvanised Angle of 50 mm x 50 mm x 60 x 5000 mm long complete with clamps ,blots, nuts etc. as required and as directed by the department.
6
-
-
... More
Supplying and fitting fixing of galvanised channel of 100 mm x 50 mm x 65 x 2200 mm long complete with clamps ,blots, nuts etc. as required and as directed by the department.
6
-
-
... More
Supplying and erection of 11 KV Pin insulator (Poly) with G.I.pin, blots and nuts coach screw etc. as required and as directed by the department.
6
-
-
... More
Supplying and erection of 11 KV Disc insulator (Poly) 45 KN with hard ware fittings etc. as required and as directed by the department.
3
-
-
... More
Supplying and fitting fixing of 11 KV T Cross arm complete with clamps ,blots, nuts etc. as required and as directed by the department.
6
-
-
... More
Supplying and fixing of 11 KV 400 A Gang operated switch with all accessories complete as required and as directed by the department.
1
-
-
... More
Supplying and fixing of 11 KV 150 A D.O. fuse set complete as required and as directed by the department.
1
-
-
... More
Supplying and fixing of 11 KV 5 KA Lighting arrestor (Poly) set complete as required and as directed by the department.
1
-
-
... More
Construction of 3 phase 11 KV Line on G.I. steel tubular pole 12m SP-62 using AAA Raccoon conductor 7/3.81mm with T cross arm average span 70m.
0.5
-
-
... More
Supplying and fixing of 11 KV 5 KA Lighting arrestor (poly) set complete as required and as directed by the departement.
1
-
-
... More
Supplying of the following specification as per IS :2713 : 410 Sp hot dip Galvanized Steel tubular pole manufacturing out from electrically welded in 3 (three section having a baseplate including providing all required building materials as directed and specified by the deptt. (NEZONE or equivalent make ) 410 SP 66 Length of pole = 12.00 metre , Length of section , Bottom = 5.80 M, Middle = 3.10 M, Top = 3.10 M, Out side dia. & THickness Bottom = 219.10 x 5.60 mm, Middle = 193.7 x 4.85 mm, Top = 165.10 x 4.50 mm
4
-
-
... More
Suppliying including installation, testing and commissioning of Air/Water Cooled Diesel Generator set coupled to suitable alternator of 220/415 V , AC, 1/3-Phase 0.8 p.f.(1a mounted on a 1) M.S. Fabricated base frame .,2) M.S. fuel tank of required capacity.,3) Residual Silencer.,4) AMF Control panel.5) Suitable batteries with lead.,5) First fill of lube oil.,6) Acoustic Enclosure complete with all accessories as specified and directed by the departement conforming to IS comprising the Technical Specification.. as per manufacturer. (RANGE FROM 5 KVA TO 625 KV.Kirloskar green/bliss, Leyland, VolvoPenta, Perkinson, Mahindra, Greaves, Escort engine and Kirloskar, Stamford, Leroy somer or equivalent alternator.
125 KVA Water Colled Diesel Generator set.
1
-
-
... More
Supplying including installation of 11 KV CT/PT combine metering system complete as required and directed by the department. ( or as per APDCL)
1
-
-
... More
Item :- Supplying including installation, commissioning of vermin and dust proof totally enclosed, MDB PANEL S/S CONTROL ROOM (FLOOR MOUNTING)
Fabrication: - 1.6 mm thick CRCA Sheet
Bus Bar: - 500A Aluminium Bus Bar
Dimensions: - 1500 (H) 1450 (W) x 500 (D)mm
1
-
-
... More
Supplying including installation of 4' dia. C.I. earth pipe complete as required and as directed by the department.
4
-
-
... More
Construction of 160 KVA Pole mounted 11/0.433 KV Sub-Station 3 phase 50 C/S Aluminium wound distribution transformer with all accessories and first filling of transformer oil.
1
-
-
... More
Supplying of following size PVC/XLPE insulated and PVC sheated 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip , Galvanised for cables up to 2x10 sq mm,3x10 sq mm,4x6 sq mm balance all galvanised steel strip) ,extruded PVC Type ST2 sheathed, 650/1100V grade as per Is 7908(part 1) 1988 armoured U.G. cable U.G. cable laid in ground /partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc. complete handling of surplus spoil, debriset to proper place as specified and directed by the deptt. (Nicco/Havells/RPG/CCI/Polycab/Gloster/Finolex make). 185.00 sq. mm. 3 & 1/2 core armoured(polycab make)
256
-
-
... More
XLPE insulated, insukation screening with extruded semi conducting compound in combination with Copper tape (0.3KA for 1se , AL flat strip / round armoured and over all PVC sheathed cable confirming to IS 7098 / ( PART-1 1985 with latest amendments, laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 120 cm, refilling, protective brick covering Sand cushioning etc. complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/Havells/RPG/CCI/Polycab/Gloster/Finolex make). 240.00 sq. mm. 1 core HT Cable (poly cab make)
78
-
-
... More
Load security as per APDCL norms.
250
-
-
... More
Supply of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, armoured, extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/Havells/RPG/CCI/Polycab/Gloster/Finolex make). 185 sq. mm. 1 core armoured (poly cab make)
56
-
-
... More
Item :- Supplying including installation, commissioning of vermin and dust proof totally enclosed, MDB PANEL - 1 (FLOOR MOUNTING)
Fabrication: - 1.6 mm thick CRCA Sheet
Bus Bar: - 250A Aluminium Bus Bar
Dimensions: - 1500 (H) 2100 (W) x 500 (D)mm
2
-
-
... More
Supply of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, armoured, extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/Havells/RPG/CCI/Polycab/Gloster/Finolex make). 25 sq. mm. 3.5 core armoured (poly cab make)
1008
-
-
... More
50 sq. mm. 3.5 core armoured (poly cab make)
656
-
-
... More
70 sq. mm. 3.5 core armoured (poly cab make)
570
-
-
... More
120 sq. mm. 3.5 core armoured (poly cab make)
480
-
-
... More
240 sq. mm. 3.5 core armoured (poly cab make)
970
-
-
... More
Payment to be made APDCL & Licensing Board for Service connection charges, Supervision charges & Charging Approval etc.
1
-
-
... More
Supplying including installation, commissioning of 5 HP Submersible pump with control panel, Kirlosker make
1
-
-
... More
Supply ,Installation & Commissioning of 4nos. 30Mtr. + 5 Mtr. High Stadium Mast with 120 Nos 960W suitable Sports Light of Crompton,Bajaj ,Nezone and Valmont etc.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements