Public Works Building And NH Department Tender

... More
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.

Public Works Building And NH Department - PWDBNH Tender

Works
Civil And Construction
Building Construction
Eprocure
Opening Date1 Feb 2025
Closing DateCancelled
Tender Amount₹ 2,28,92,650 
Notes
Download

AI Insights

Technical Capacity
... View More
The required prior work experience for the bidder includes experience in construction works, with specific emphasis on similar nature of works such as Multi Storied RCC Works, Sanitary & Water Supply Works, and Electrical Works in Building. The bidder should have experience in using heavy earthmoving equipment and quality control in compaction of soils, as well as experience in mechanized granular pavement construction and construction of asphaltic overlays. The bidder should have completed similar works under Govt./Semi Govt./ PSU etc. for a minimum amount of 40% of the works as indicated in Appendix-I during the last 5 years ending last day of submission of tender in a single job. The required prior work experience for the bidder is as follows: - Three similar completed works, each cost not less than 40% of the Estimated cost put to tender. - Two similar completed works, each cost not less than 60% of the Estimated cost put to tender. - One similar completed work costing not less than 80% of the Estimated cost put to tender. For building works, the number of storeys for the purpose of definition of similar work may be taken as under: - Upto three storeys buildings: No binding - Four to six storeys buildings: Minimum one building of two storeys Or completing balance Construction work of one building (i/c structural work) minimum up to two storey. - Seven to ten storeys buildings: Minimum one building of five storeys Or completing balance Construction work of one building. (i/c structural work) minimum up to five storey - More than ten storey buildings: Minimum one building of eight storey Or completing balance Construction work of one building. (i/c structural work) minimum up to eight storey Each basement, stilt constructed in the building shall be considered as a storey. In case the work involves construction of two or more basements, then it is to be stipulated in the definition of similar work that the agency should have executed one similar work with minimum one basement under one agreement. The bidder should have executed similar works under Govt./Semi Govt./ PSU etc. for a minimum amount of 40% of the works as indicated in Appendix-I during the last 5 years ending last day of submission of tender in a single job. This includes electrical and other allied works, as well as Fire-fighting and other allied works. For basement construction, the agency should have executed one similar work with a minimum of one basement under one agreement. The value of executed works shall be brought to the current costing level by enhancing the actual executed value of work at a simple interest rate of 7% per annum. The bidder should also have a solvency of minimum 40% of the Estimate cost put to tender or a Net-worth certificate of minimum 10% of the Estimate cost put to tender.

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. All works upto plinth level Concrete of M25 grade with minimum cementcontent of 330 kg /cum

11.98

-

-

... More
All works above plinth level upto floor V level] Concrete of M25 grade with minimum cement content of 330 kg /cum

2.19

-

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

55.6

-

-

... More
Lintels, beams, plinth beams,girders, bressumers and cantilevers.

22.5

-

-

... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

10.49

-

-

... More
Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.

28.8

-

-

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

72

-

-

... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all levels. Cement mortar 1:4 (1 cement :4 coarse sand)

308.1

-

-

... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto Plinth levels. Thermo-Mechanically Treated bars of grade Fe-500D or more.

1002.42

-

-

... More
Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more

782.74

-

-

... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

11828.06

-

-

... More
Providing fitting fixing PVC panel for wall and ceiling(plain) with material and installation including labour, carriage etcas directed and specified.o

79.2

-

-

... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

392.64

-

-

... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.

5067

-

-

... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.

1350

-

-

... More
52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

387

-

-

... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

16

-

-

... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc complete.

4

-

-

... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

88

-

-

... More
Providing and laying Vitrified tiles in floor in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm

40

-

-

... More
12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

165

-

-

... More
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)

655.8

-

-

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

1105.8

-

-

... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

5629

-

-

... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colourTwo coats

3670.5

-

-

... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

6298

-

-

... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

2627.5

-

-

... More
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

157.32

-

-

... More
Painting wood work with Deluxe Multi Surface Paint of required shade. Two ormore coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture

40.32

-

-

... More
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

89.4

-

-

... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture

206.4

-

-

... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of.................................channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineerin- charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60

180

-

-

... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

3742.5

-

-

... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

1298.39

-

-

... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

519.8

-

-

... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

334.17

-

-

... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

120

-

-

... More
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

504.96

-

-

... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm

14

-

-

... More
Providing and fixing bright finished brass door latch with necessary screws etc. complete : 300x16x5 mm

14

-

-

... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 125 mm

32

-

-

... More
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 100x70x4 mm (ordinary type) each

64

-

-

... More
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

32

-

-

... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

32

-

-

... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

32

-

-

... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

10

-

-

... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

10

-

-

... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

10

-

-

... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450 mm dia

10

-

-

... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

16

-

-

... More
Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

16

-

-

... More
Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia

12

-

-

... More
Providing and fixing brass stop cock of approved quality : 20 mm nominal bore

8

-

-

... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

8

-

-

... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

4

-

-

... More
Providing and fixing Polyethelene-Aluminium-Polyethelene PE-ALPE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in-charge. 2532(32mmOD) pipe

320

-

-

... More
4050 (50 mm OD) pipe

240

-

-

... More
Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge. Concealed work, including cutting chases and making good the wall etc. 1216(16mmOD) pipe

160

-

-

... More
1620(20mmOD) pipe

110

-

-

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 150 mm dia.

90

-

-

... More
80 mm dia.

120

-

-

... More
50mm dia

150

-

-

... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

20000

-

-

... More
ADC Sir's Room Desk Model: Aristo Main Desk with ERU and pedestalOverall size- 1800mm (W) x 2100mm (D) x 750mm (H) Brand- Godrej,Geeken, Featherlite or Equivalent

1

-

-

... More
ADC Sir's Room SeatingModel: Godrej Marvel High Back Chair Brand- Godrej,Geeken, Featherlite or Equivalent

2

-

-

... More
Senior Officer DeskModel: Godrej Finnesse Table-5026+ ERU 3616 RHS with PedestalOverall size- 1500mm (W) x 750mm (D) x 740mm (H) Main desk1050mm (W) x 450mm (D) x 705mm (H) ERU Brand- Godrej,Geeken, Featherlite or Equivalent

6

-

-

... More
Senior Officer SeatingModel: Godrej Thrill Cushion Executive (LC) HB Brand- Godrej,Geeken, Featherlite or Equivalent

6

-

-

... More
Workstation SeatingModel: Godrej Thrill mesh Mid back Brand- Godrej,Geeken, Featherlite or Equivalent

50

-

-

... More
PA's Room DeskModel: Godrej Mayfair Main desk with ERU and PedestalDesk size- 1200mm (W) x 600mm (D) x 750mm (H)ERU size- 900mm (W) x 450mm (D) x 750mm (H)Pedestal size- 390mm (W) x 435mm (D) x 529mm (H) Brand- Godrej,Geeken, Featherlite or Equivalent

1

-

-

... More
PA's Room SeatingModel: Godrej Versa Canvas Mid back Brand- Godrej,Geeken, Featherlite or Equivalent

1

-

-

... More
Visitor SeatingModel: Godrej Bravo visitor chair Brand- Godrej,Geeken, Featherlite or Equivalent

40

-

-

... More
Conference DeskModel: Godrej Mingle Modular PLT Brand- Godrej,Geeken, Featherlite or Equivalent

1

-

-

... More
Conference SeatingModel: Godrej Kareena Mid back conference chair Brand- Godrej,Geeken, Featherlite or Equivalent

14

-

-

... More
Workstation 1Model: Godrej,Geeken, Featherlite or Equivalent Wish Recta 1500 x 600 (Rectangular)Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. Tiles: Combination of top tiles are fabric magneitc tile. Bottom tiles - Plain metal. SPLIT Tiles: Combination of two finishes for the top tiles on the user side shall be split fabric tackable along with split white board. INTERMEDIATE BLOCKS Intermediate blocks are given in DL + DL finsh. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1200 mm w x 600 mm d. Pedestals with legs - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors. KBPT with mousetray - metal.

30

-

-

... More
Workstation 2Model: Godrej,Geeken, Featherlite or Equivalent Wish Penta 1500 x 1500 x 600Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. Tiles: Combination of top tiles are fabric magneitc tile. Bottom tiles - Plain metal. SPLIT Tiles: Combination of two finishes for the top tiles on the user side shall be split fabric tackable along with split white board. INTERMEDIATE BLOCKS Intermediate blocks are given in DL + DL finsh. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500 mm w1 X 1500 MM w2 x 600 mm d. Pedestals with legs - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors. KBPT with mousetray - metal

18

-

-

... More
Workstation 3Model: Godrej,Geeken, Featherlite or Equivalent Wish Penta 1500 x 1200 x 600Providing and placing WISH panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. Tiles: Combination of top tiles are fabric magneitc tile. Bottom tiles - Plain metal. SPLIT Tiles: Combination of two finishes for the top tiles on the user side shall be split fabric tackable along with split white board. INTERMEDIATE BLOCKS Intermediate blocks are given in DL + DL finsh. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500 mm w1 X 1200 MM w2 x 600 mm d. CPU trolley - with castors KBPT with mousetray - metal

2

-

-

... More
Overhead StorageModel: Godrej,Geeken, Featherlite or Equivalent Ascend wall mounted overhead storageOverall size- 600mm (W) x 310mm (D) x 785(H)

82

-

-

... More
Supply, Fitting and Fixing Johnson Zebra Roller Blinds (Combi Blackout) make and shade, design as per choice complete as specified and directed by the department at all level.

45

-

-

... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

900

-

-

... More
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

1200

-

-

... More
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil

1200

-

-

... More
Internal Deep Cleaning Service: 1.Deep Cleaning Rooms and Common area Decluttering and Organizing Spaces, Dusting and Wiping Down surfaces, Cleaning & Sanitizing, treating floors and Carpets, Disinfecting High Touch areas, Addressing specific needs based on Facility's purpose. 2. Deep Cleaning of Restroom area Declutter for clarity, Thoroughly Sanitizing WC, Shower Heads & Toilets Floors, Externally Wet Wiping of Windows, Glasses, Mopping/Scrubing of the floors, Applying polishing material to reclaim the shining of tiles

2500

-

-

... More
External Deep Cleaning Service. For all Organic/Bio material partial decomposed area- Wiping Down surfaces Cleaning and Sanitizing Washing the areas using high quality disinfectant Giving proper fragnance to get rid of the bad odour from the area.

1200

-

-

... More
Chemical Cleaning Of Existing Water Supply Pipe Lines. (For 14 Nos. of Toilets)

1

-

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required Group C

176

-

-

... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

386

-

-

... More
15/16 A switch

25

-

-

... More
3 pin 5/6 A socket outlet

210

-

-

... More
6 pin 15/16 A socket outlet

29

-

-

... More
2 way 5/6 A switch

6

-

-

... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

176

-

-

... More
Double pole

20

-

-

... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way , Double door

10

-

-

... More
12 way , Double door

10

-

-

... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door

3

-

-

... More
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 100 A

3

-

-

... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required 3 Module (100mmX75mm)

40

-

-

... More
6 Module (200mmX75mm)

8

-

-

... More
8 Module (125mmX125mm)

8

-

-

... More
12 Module (200mmX150mm)

10

-

-

... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

20

-

-

... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required

125

-

-

... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. lades, 0 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required

60

-

-

... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

60

-

-

... More
Supplying, installation,testing and commissioning of Fixed Speed, 1.5 Ton-Capacity, 3Star BEE rating Split Type Air-Conditioner Model- Voltas SAC 185V Vectra Prism complete with all accessories including necessary connection and earthing etc. as required complete and as directed by the Department.

3

-

-

... More
Supplying, installation,testing and commissioning of V-Guard Digital Volt Meter 4.0 KVA Automatic Line Voltage Corrector Or Step Type Auto Transformer complete with all accessories including necessary connection and earthing etc. as required complete and as directed by the Department.

3

-

-

... More
Supplying, installation,testing and commissioning of Single Phase Modular A.C Starter switch Range 16 - 25 Amps complete with all accessories including necessary connection and earthing etc. as required complete and as directed by the Department.

5

-

-

... More
Supplying, installation,testing and commissioning of LG or equivalent make 3.0 Ton-Capacity, 3Star BEE rating Cassate Ceiling mounted Type Air-Conditioner complete with all accessories including necessary connection and earthing etc. as required complete and as directed by the Department.

2

-

-

... More
Supplying, installation,testing and commissioning of Philips Cool Day Light Chrome Square LED surface ceiling Light complete with all accessories including necessary connection and earthing etc. as required complete and as directed by the Department.

42

-

-

... More
Supplying, installation,testing and commissioning of POLYCAB INDIA LIMITED 4 Core 16 Sq mm Aluminium Armoured Cable complete with all accessories etc. as required complete and as directed by the Department.

60

-

-

... More
Supplying, installation,testing and commissioning of POLYCAB INDIA LIMITED 3.5 Core 25 Sq mm Aluminium Armoured Cable complete with all accessories etc. as required complete and as directed by the Department.

60

-

-

... More
Supplying, installation,testing and commissioning of PPhilips 18W HL Yes 5 Star 1250 for 18W HL with 6500 K G-13 complete with all accessories including necessary connection and earthing etc. as required complete and as directed by the Department.

65

-

-

... More
Supplying, installation,testing and commissioning of Orient electric Exhaust Fan 200 mm complete with all accessories including necessary connection and earthing etc. as required complete and as directed by the Department.

6

-

-

... More
Copper pipe including cable fitting (1/4, 1/2,5/8 ) ( Chief Engineer , PWD (B) approved rate).

20

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.