Public Works Building And NH Department Tender

Wall mounted showcaseof Size1500(W)X400(D)X3100(H)

Wall mounted showcase(Type-1) of size2550(w)x450(D)X3100mm(H)

Wall mounted showcase(Type-2)of size 5700(W)x450(D)x3100mm(H)

Wall mounted showcase(Type-3) of size500(W)X450(D)x2100mm(H)

Free standing showcase of size 900(W)X900(D)X2000mm(H)

Seating as per design of size 600(W)X2000(L)X450mm(H)

Table top showcase as per design of size 1500(W)X1500(D)X1200(H)

Table top showcase as per design of size 1200(W)x 1800(D)x1200mm(H)

Old Document Frame( Size 450mmx600mmwith 2mm glass including mounting to be considered)Frame with non reflective medium grade glass equivalent to Lion make polycarbonate back support mounted by syber frame

Bamboo Jaali Screen size 1500x2700mm.

Baggage Shelf of size2500(W)X450(D)X2100mm(H) With internal division @ 450mm.

Working Table, Chair of Table size 1800x900x750mm

Reading Table, chair 1200x600x700mm

Book Shelf Ply Almira with laminate finish and glazed doors. Size 1600(H)X1000(W)X450mm(D).

Thematic door frame 300mm(1') wide and 40mm(1.5") thick wooden band around the door with curving.

Wood curved bracket as per design of size 1000x900x150mm

Chair of Audio Visual Room as per Drawing

Furniture for strong room( Racks, Boxes, Lokers etc.) floor are of strong room 4.095mx5.735m=23.48 sqm.(1800x400x2100)

Cost of carriage Material

Cost of installation

Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks, almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-incharge.

Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Using E aluminium channel of 1MM thick

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof.The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles

A) Wall Relief in Fiber at Lobby Space Wall Relief for Lobby Space (Low Relief) Theme- Bhumidaan by King to Satradhikar size: Hight 8 feet Length 12 feet( Size may vary as per the composition provided) Medium Fiber Glass

B) Satra Themac Mural Satra Thematic Mural (Low Relief) Theme- A composition comprising elements ofSatra Culture (Satriya dance, Bhaona, Mask etc. Medium Fiber Glass.(High 8 feetLength 8 feet)

C) Painng of Satradhikars Portrait Painting of Satradhikars (To be painted from literary description )ize:Hight 4 feet Length 3 feet for each painting. size: Hight 4 feet Length 3 feet for each painting. Medium Acrylic on Canvas

D) Themac Wall Painng with border. Thematic Wall Painting with border (Composition from Manuscript Painting)size:Hight 6.5feet(approx) Length 4 feet(approx) for each painting. Medium Wall painting

Supplying including fitting and fixing of following AC Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt. As required complete and as directed by the department. Domestic upto 300 mm sweep.

Supplying,installation,testing and commissioning of LED Streek Light 12 W 3000K WHT, 240 V Havells make Track light luminaries complete with all accessories directly on wall/ceiling including connection cable as approved by the deptt with 1.5 sqmm PVC insulated SC Copper conductor as required and as directed by the department. Make: Havells

Supplying,installation,testing and commissioning of LED INNOVA NEO 3W LED6500K, 240 V Havells make Downlight luminaries including lamps. or equivalent complete with all accessories directly on wall/ceiling including connection cable as approved by the deptt with 1.5 sqmm PVC insulated SC Copper conductor as required and as directed by the department. Make: Havells

Supplying,installation,testing and commissioning of LED PRISTINE SPIKE LED LIGHT ,7W LED 3000K, 240 V Havells make pole mounted micro spot light including lamps. or equivalent complete with all accessories directly on wall/ceiling including connection cable as approved by the deptt with 1.5 sqmm PVC insulated SC Copper conductor as required and as directed by the department. Make: Havells

Supplying,installation,testing and commissioning of LED AZSTROSPOTLIGHT ,7.5W LED 3000K, 240 V Havells make bracket type spot light including lamps. or equivalent complete with all accessories directly on wall/ceiling including connection cable as approved by the deptt with 1.5 sqmm PVC insulated SC Copper conductor as required and as directed by the department. Make: Havells

Supplying,installation,testing and commissioning of LED 3W COB magnetic track light,48V DC 220V including lamps complete with all accessories directly on wall/ceiling including connection cable as approved by the deptt with 1.5 sqmm PVC insulated SC Copper conductor as required and as directed by the department.