Public Works Building And NH Department Tender

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu ral sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured. sqm

Earthing GI earth Pipe 4.5 meter long ,40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. With charcoal/coke and salt as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circute breaker suitable for inductive load of double poles in the exixting MCB DB complete with connections, testing and commissioning etc. As required.

Supplying and erection of SMC terminal junction box.

Supplying and erection of 150 Sq mm 3.5 Core Armoured Cable

Supplying and erection of 50 Sq mm 3.5 Core Armoured Cable

Supplying and erection of 16 Sq mm 4 Core Armoured Cable

Supplying and erection of 10 Sq mm 4 Core Armoured Cable

Supplying and erection of 4 Sq mm 2 Core Armoured Cable

Supplying and erection of 2.5 Sq mm 2 Core Armoured copper Cable

Supplying and erection of 1.5 Sq mm 2 Core Armoured copper Cable

Supplying and erection of 12W LED ceiling panel Light

Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cab;e FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts (Finolex/ RR Kabelor equivalent make as approved by deptt.) in surface recessed conduit wiring system with 20mm dia 2mm thick/ heavy rigid PVC IS: 9537 part-III conduit (Berlia/AKG/ Precision/ Presto Plast/ Polycab/MW or equivalent make as approved by deptt.) including 6 Amp flush type switch /bell push (Anchor Penta/ Gold medal/Kolor.Kom/ Havells or equivalent make as approved by the the deptt.) GI MS switch board (ISI Marked) with phenolic laminated sheet cover, ceiling (i) Medium point upto 6.00 metre Length

Long point up to 10.metre Length

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up tp 1100 Volts (Finolex/ RR Kabelor equivalent make as approved by the deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta/ Gold medal/ Kolor kany.kom/ Havells or equivalent make). GI/MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity 2.5 sq. mm. cable to the 3rd pin of the socket as required complete with 20 mm dia. 2mm thick/heavy/ rigid ISI marked IS-9537 PART-III rigid. Extra long point up to 20.00 metre. Length.

Wiring for 5 pin 6 amp plug with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS- 694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/ RR Kabel or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta/Gold medal/Kolor kany. Kom/Havells or equivalent make as approved by the deptt.) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan.

Wiring for circuit wiring with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/recessed PVC conduit (Berlia/ AKG/ Precision/ Presto Plast/ Polycab/MW or equivalent make as approved by the Deptt.). With 2 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/heavy rigid PVC IS: 9537 Part-III conduit.

Wiring for drawing sub-main line with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytric copper conductor for voltage grade upto 1100 volts (Finolex/ RR Kabel or Equivalent make as approved by the Deptt.) PVC conduit (Berlia/AKG/Precision/ Presto Plast/ Polycab/ MW or equivalent make as approoved by the Deptt.) including earth continuity in surface/ recessed 20mm. dia. 2mm thick/heavy ISI marked IS:9537 PART-III rigid PVC conduit wiring

With 2 x 4 sq. mm. + earth continuty with 1x2.5 sq. mm. cable in 20mm. Dia. 2mm thick/ heavy rigid PVC IS: 9537 Part-III conduit.

Supplying and fixing of batten holder (Anchor Penta PC CHERRY/ Gold medal/Kolor Kany.kom/ Havells or equivalent make as approved by the Deptt.) including connection as approved by Deptt. As required (without Lamp)

Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/angle holder/decorative bracket/ bulk head fitting/ pendent holder etc. as specified and directed by the deptt.

Supplying with fitting and fixing sheet steel phosphatised, powder painted dust & vermin proof Double door (IP-43) surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grounting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the Deptt. 8 way SPN double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted single door surface mounting vertical TPN MCB DB incorporated with bar-bar, Neutral link, Earth bar 125A and din rail etc fitted on wall with grounting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the Deptt. 4 way TPN (8+12) single door

Supplying with fitting and fixing single pole 10 KA 240/415 V 50 Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by Deptt. 6 to 32 A

Supplying with fitting and fixing single pole 10 KA 240/415 V 50 Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by Deptt. 6 to 32 A

Supplying including fitting and fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.as required complete and as directed by the Department [without standard model 1400 mm sweep. (ORIENT PSPO/Usha/CROMPTON/Havells/ATC/V GUARD make)

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV Grade Solid Aluminium conductor upto 10 sq. mm balance stranded conductor, XLPE insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq. mm balance Aluminium strip , Galvanised for cable up to 2x10 sq. mm 3x10 sq mm, 4x6 sq mm balance all galvanised steel strip), extruded PVC Type ST2 Sheathed, 650/1100 v grade as per IS 7908(Part 1) 1988 armoured U.G. Cable. U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75 cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the department. (Nicco/Havells/RPG/CCI/Polycab/Gloster/Finolexmake . 6 00 sq. mm 3 core armoured U.G. cable

Overhead Tank with staging heightr up to 20 m

Sub-station Equipment

Generating Set