Numaligarh Refinery Limited Tender
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Numaligarh Refinery Limited - NRL Tender
Civil And Construction
Coronavirus COVID 19
Eprocure
Opening Date22 Feb 2019
Closing Date7 Mar 2019
Tender AmountRefer Documents
Costs
EMD
0Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_NRL_447972_1Bid Award Id
ViewTender No
LC15000104/SNJTender Authority
Numaligarh Refinery Limited ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Flooring Works
-
-
-
Providing, machine mixing and laying 50mm thick cement concrete screed in mix ratio 1:2:4 (1 cement : 2 coarse sand : 4 aggregates 12.5mm size), laid in panels, well vibrated, compacted to correct line and level, surface finished ready to receive floor finish and cured by keeping well covered and protected against excesses of any type (The contractor will provide for preparation of surface by cleaning, hacking and exposing aggregate to achieve the best bond) etc. all complete at all heights and leads to the entire satisfaction of the PM. below Carpet Flooring.
1307
-
-
Providing, machine mixing and laying 50mm thick cement concrete screed in mix ratio 1:2:4 (1 cement : 2 coarse sand : 4 aggregates 12.5mm size), laid in panels, well vibrated, compacted to correct line and level, surface finished ready to receive floor finish and cured by keeping well covered and protected against excesses of any type (The contractor will provide for preparation of surface by cleaning, hacking and exposing aggregate to achieve the best bond) etc. all complete at all heights and leads to the entire satisfaction of the PM. below Bamboo wooden Flooring.
257
-
-
Providing, machine mixing and laying 50mm thick cement concrete screed in mix ratio 1:2:4 (1 cement : 2 coarse sand : 4 aggregates 12.5mm size), laid in panels, well vibrated, compacted to correct line and level, surface finished ready to receive floor finish and cured by keeping well covered and protected against excesses of any type (The contractor will provide for preparation of surface by cleaning, hacking and exposing aggregate to achieve the best bond) etc. all complete at all heights and leads to the entire satisfaction of the PM. below Marble Flooring.
2063
-
-
Providing, machine mixing and laying 50mm thick cement concrete screed in mix ratio 1:2:4 (1 cement : 2 coarse sand : 4 aggregates 12.5mm size), laid in panels, well vibrated, compacted to correct line and level, surface finished ready to receive floor finish and cured by keeping well covered and protected against excesses of any type (The contractor will provide for preparation of surface by cleaning, hacking and exposing aggregate to achieve the best bond) etc. all complete at all heights and leads to the entire satisfaction of the PM. below Vinyl Flooring.
139
-
-
Providing and laying 7mm to 9mm thick approved make tufted multi-level loop tile carpet as per detailed and instruction of approved manufacturer etc. floor fixed over dry harden IPS with as adhesive as recommended by the approved of carpet manufacturer. Required edging angles, junction, entrances etc. shall be fixed and finished with as per recommendation of the carpet manufacturer to approval of the PM. Floor to be levelled, cleaned all complete at all heights and leads to the entire PM. Carpet - 1 Flooring (Location : ED/GM Cabins, ED/GM Secretary, Cabin 1 to 12, Auditorium)
432
-
-
Providing and laying 7mm to 9mm thick approved make tufted multi-level loop tile carpet as per detailed and instruction of approved manufacturer etc. floor fixed over dry harden IPS with as adhesive as recommended by the approved of carpet manufacturer. Required edging angles, junction, entrances etc. shall be fixed and finished with as per recommendation of the carpet manufacturer to approval of the PM. Floor to be levelled, cleaned all complete at all heights and leads to the entire PM. Carpet - 2 Flooring (Location : Waiting Lounge, Board room, Corridor, Director's cabin)
350
-
-
Providing and laying 7mm to 9mm thick approved make tufted multi-level loop tile carpet as per detailed and instruction of approved manufacturer etc. floor fixed over dry harden IPS with as adhesive as recommended by the approved of carpet manufacturer. Required edging angles, junction, entrances etc. shall be fixed and finished with as per recommendation of the carpet manufacturer to approval of the PM. Floor to be levelled, cleaned all complete at all heights and leads to the entire PM. Carpet -3 Flooring (Location : Board room, Corridor)
204
-
-
Providing and laying 7mm to 9mm thick approved make tufted multi-level loop tile carpet as per detailed and instruction of approved manufacturer etc. floor fixed over dry harden IPS with as adhesive as recommended by the approved of carpet manufacturer. Required edging angles, junction, entrances etc. shall be fixed and finished with as per recommendation of the carpet manufacturer to approval of the PM. Floor to be levelled, cleaned all complete at all heights and leads to the entire PM. Carpet - 4 Flooring (Location : Meeting room)
70
-
-
Providing and laying 7mm to 9mm thick approved make tufted multi-level loop tile carpet as per detailed and instruction of approved manufacturer etc. floor fixed over dry harden IPS with as adhesive as recommended by the approved of carpet manufacturer. Required edging angles, junction, entrances etc. shall be fixed and finished with as per recommendation of the carpet manufacturer to approval of the PM. Floor to be levelled, cleaned all complete at all heights and leads to the entire PM. but for Hand tufted Carpet Flooring.
251
-
-
Providing and installing pre finished solid strip bamboo flooing as approved by the PM sub strata shall be damp proof and free of contaminations. Method of fixing shall be as recommended by the approved manufacturer and approved by the PM. (Location : Meeting room 1 & 2, Director's cabin, Lounge, Auditorium) (Basic Rate - 500/Sqft)
257
-
-
Providing and installing pre finished solid strip bamboo flooing as approved by the PM sub strata shall be damp proof and free of contaminations. Method of fixing shall be as recommended by the approved manufacturer and approved by the PM. 100mm high bamboo wooden skirting finished with laminate. (Location : Meeting room 1 & 2, ED/GM Cabins, ED/GM Secretary, Cabin 1 to 12) (Basic Rate - 500/Sqft)
317
-
-
Providing and installing pre finished solid strip bamboo flooing as approved by the PM sub strata shall be damp proof and free of contaminations. Method of fixing shall be as recommended by the approved manufacturer and approved by the PM. 100mm high bamboo wooden skirting finished with veneer. (Location : Lounge, Auditorium, Board room, Waiting Lounge, Board room, Corridor, Director's cabin, Meeting room) (Basic Rate - 500/Sqft)
448
-
-
Providing and fixing 38mm teakwood plank flooring with tongue and groove joints (concealed screwing and minimum length 1.5m) , comprising 75x12mm marine ply 600mm x 600mm centre to centre support locations including providing and applying a coat of ready mixed primer and a coat of Fire resistant paint both of approved brand and manufacturer over exposed surfaces . Entire work to be done complete as per drawings, specifications and direction of PM including melamine polishing of teak wood planks after filling wood filler and sand papering up to smooth finish in natural colour. Stage Floor - Moulding : Providing and fixing 145x50mm teakwood moulding as per architect on the edges of stage wooden flooring including melamine polishing of teak wood planks after filling wood filler and sand papering up to smooth finish in natural colour.The final color of the material and design horizontal or vertical to be approved by the consultant and the architect both to ensure the final looks of the installation is as per the design intended for , contractor to take a final sign off before start of work All Makes and models of all items/samples should be approved by the consultant prior to the installation.
33
-
-
Providing and laying approved size, quality, colour, design and shade fully homogeneous Vitrified tile of approved make (conforming to IS 15622) flooring in pattern as detailed in drawing or as directed by the PM. Tile to be bedded in cement sand mortar mix ratio 1:6 (1 cement : 6 sand) including cleaning and preparing the surface for bedding, spreading neat cement slurry by using minimum cement about 2 kg/Sqm over cleaned surface and spreading neat cement paste using minimum cement about 4.5 kg/Sqm over cement mortar bed to be cleaned and grouted with matching colour approved quality readymade grout, curing, cleaning, to required line, level, all complete at all leads, lifts and heights to the entire satisfaction of the PM. VT1 - 600mm x 600mm Vitrified tile Flooring (Location : Archive room 1 to 4, Printing area, Pantry, Corridor, Cafeteria, Toilet, BMS room) (Basic Rate - 80/Sqft)
607
-
-
Providing and laying approved size, quality, colour, design and shade fully homogeneous Vitrified tile of approved make (conforming to IS 15622) flooring in pattern as detailed in drawing or as directed by the PM. Tile to be bedded in cement sand mortar mix ratio 1:6 (1 cement : 6 sand) including cleaning and preparing the surface for bedding, spreading neat cement slurry by using minimum cement about 2 kg/Sqm over cleaned surface and spreading neat cement paste using minimum cement about 4.5 kg/Sqm over cement mortar bed to be cleaned and grouted with matching colour approved quality readymade grout, curing, cleaning, to required line, level, all complete at all leads, lifts and heights to the entire satisfaction of the PM. VT2 - 600mm x 600mm Vitrified tile Flooring (Location : Toilets, Cafeteria) (Basic Rate - 80/Sqft)
181
-
-
Providing and fixing 100mm high skirting made out of same tiles as that of flooring fully homogeneous Vitrified tile to walls/columns as shown in drawing or as directed by the Architect. Tiles shall be fixed with approved compatible tile adhesive of approved make to correct line, level and plumb. Joints are well cleaned and grouted with matching colour of approved quality with polymer based grouts (Bal / Laticrete or equivalent approved) to match shade of the tile and cured, cleaned and including finishing junction of plaster, protecting etc. all complete at all heights, lifts and leads to the entire satisfaction of the PM. (Location : Archive room 1 to 4, Printing area, Cafeteria) (Basic Rate - 80/Sqft)
235
-
-
Providing and fixing approved quality, colour, design and shade fully homogeneous Vitrified tile, (confirming to IS 15622) dado to walls/columns, as shown in drawing or as directed by the PM. Tile fixed with approved compatible adhesive (Bal / Laticrete or equivalent approved) over concrete surface. Joints are well cleaned grouted with matching colour approved quality polymer based readymade grout, curing, cleaned and where specified or shown in drawing etc. complete to the entire satisfaction of the PM. VT1 - 600mm x 600mm Vitrified tile dado (Location : Pantry, Toilet) (Basic Rate - 80/Sqft)
300
-
-
Providing and fixing approved quality, colour, design and shade fully homogeneous Vitrified tile, (confirming to IS 15622) dado to walls/columns, as shown in drawing or as directed by the PM. Tile fixed with approved compatible adhesive (Bal / Laticrete or equivalent approved) over concrete surface. Joints are well cleaned grouted with matching colour approved quality polymer based readymade grout, curing, cleaned and where specified or shown in drawing etc. complete to the entire satisfaction of the PM. VT2 - 600mm x 300mm Vitrified tile dado (Location : Toilets, Cafeteria) (Basic Rate - 80/Sqft)
374
-
-
Providing and fixing approved quality, colour, design and shade fully homogeneous Vitrified tile, (confirming to IS 15622) dado to walls/columns, as shown in drawing or as directed by the PM. Tile fixed with approved compatible adhesive (Bal / Laticrete or equivalent approved) over concrete surface. Joints are well cleaned grouted with matching colour approved quality polymer based readymade grout, curing, cleaned and where specified or shown in drawing etc. complete to the entire satisfaction of the PM. 600mm x 300mm Desiner Vitrified tile dado (Location : Toilets, Cafeteria) (Basic Rate - 500/Sqft)
50
-
-
Providing and laying 19-20mm thick Marble flooring of machine cut, machine polished in pattern and size as detailed in drawing or as directed by the PM. Stone to be bedded in mechanically mixed cement sand mortar mix ratio 1:6 (1 white cement : 6 sand) overall about 25mm thick including cleaning and preparing the surface for bedding, spreading neat cement slurry by using minimum cement about 2 kg/sqm prior to bedding and spreading white cement paste using minimum cement about 4.5 kg/sqm over bedding, joints to be cleaned and grouted with matching colour approved quality polymer based readymade compatible grout, curing, cleaning, polishing,protecting with HDP sheet / POP till handing over etc. to required line, level, etc. all complete at all heights and leads to the entire satisfaction of the PM. MR1 - White Thauses Marble Flooring. (Location : ) (Basic Rate - 800/Sqft)
1
-
-
Providing and laying 19-20mm thick Marble flooring of machine cut, machine polished in pattern and size as detailed in drawing or as directed by the PM. Stone to be bedded in mechanically mixed cement sand mortar mix ratio 1:6 (1 white cement : 6 sand) overall about 25mm thick including cleaning and preparing the surface for bedding, spreading neat cement slurry by using minimum cement about 2 kg/sqm prior to bedding and spreading white cement paste using minimum cement about 4.5 kg/sqm over bedding, joints to be cleaned and grouted with matching colour approved quality polymer based readymade compatible grout, curing, cleaning, polishing,protecting with HDP sheet / POP till handing over etc. to required line, level, etc. all complete at all heights and leads to the entire satisfaction of the PM. MR2 - Crema noce Marble Flooring. (Location : Corridor, Reception, Lift Lobby, Recreation area, Lounge, Toilet) (Basic Rate - 450/Sqft)
1429
-
-
Providing and laying 19-20mm thick Marble flooring of machine cut, machine polished in pattern and size as detailed in drawing or as directed by the PM. Stone to be bedded in mechanically mixed cement sand mortar mix ratio 1:6 (1 white cement : 6 sand) overall about 25mm thick including cleaning and preparing the surface for bedding, spreading neat cement slurry by using minimum cement about 2 kg/sqm prior to bedding and spreading white cement paste using minimum cement about 4.5 kg/sqm over bedding, joints to be cleaned and grouted with matching colour approved quality polymer based readymade compatible grout, curing, cleaning, polishing,protecting with HDP sheet / POP till handing over etc. to required line, level, etc. all complete at all heights and leads to the entire satisfaction of the PM. MR3 - Brown armani Marble Flooring. (Location : Corridor, Reception, Recreation area) (Basic Rate - 450/Sqft)
208
-
-
Providing and laying 19-20mm thick Marble flooring of machine cut, machine polished in pattern and size as detailed in drawing or as directed by the PM. Stone to be bedded in mechanically mixed cement sand mortar mix ratio 1:6 (1 white cement : 6 sand) overall about 25mm thick including cleaning and preparing the surface for bedding, spreading neat cement slurry by using minimum cement about 2 kg/sqm prior to bedding and spreading white cement paste using minimum cement about 4.5 kg/sqm over bedding, joints to be cleaned and grouted with matching colour approved quality polymer based readymade compatible grout, curing, cleaning, polishing,protecting with HDP sheet / POP till handing over etc. to required line, level, etc. all complete at all heights and leads to the entire satisfaction of the PM. MR4 - Beige Travertino Marble Flooring. (Location : ) (Basic Rate - 500/Sqft)
1
-
-
Providing and laying 19-20mm thick Marble flooring of machine cut, machine polished in pattern and size as detailed in drawing or as directed by the PM. Stone to be bedded in mechanically mixed cement sand mortar mix ratio 1:6 (1 white cement : 6 sand) overall about 25mm thick including cleaning and preparing the surface for bedding, spreading neat cement slurry by using minimum cement about 2 kg/sqm prior to bedding and spreading white cement paste using minimum cement about 4.5 kg/sqm over bedding, joints to be cleaned and grouted with matching colour approved quality polymer based readymade compatible grout, curing, cleaning, polishing,protecting with HDP sheet / POP till handing over etc. to required line, level, etc. all complete at all heights and leads to the entire satisfaction of the PM. MR5 - Tobacco Brown Marble Flooring. (Location : Lift Lobby) (Basic Rate - 500/Sqft)
413
-
-
Providing and laying 19-20mm thick Marble flooring of machine cut, machine polished in pattern and size as detailed in drawing or as directed by the PM. Stone to be bedded in mechanically mixed cement sand mortar mix ratio 1:6 (1 white cement : 6 sand) overall about 25mm thick including cleaning and preparing the surface for bedding, spreading neat cement slurry by using minimum cement about 2 kg/sqm prior to bedding and spreading white cement paste using minimum cement about 4.5 kg/sqm over bedding, joints to be cleaned and grouted with matching colour approved quality polymer based readymade compatible grout, curing, cleaning, polishing,protecting with HDP sheet / POP till handing over etc. to required line, level, etc. all complete at all heights and leads to the entire satisfaction of the PM. White thauses+semi-precious stone in combination of Red jasper/MOP/Blue lapis and green malachite Flooring
13
-
-
Providing and fixing approved machine cut, machine polished 19-20mm thick Marble dado to walls/columns, as shown in drawing or as directed by the PM. Stone fixed with approved compatible adhesive complying with class C2TE OF BS EN 12002 and BS EN 12004over plastered surface to correct line, level and plumb. Joints are well cleaned and grouted with matching colour polymer based approved quality polymer based readymade grout and cured, cleaned, junctions with plaster finished smooth, etc. all complete at all heights and leads to the satisfaction of the PM. MR1 - White Thauses Marble cladding. (Location : Reception) (Basic Rate - 800/Sqft)
5
-
-
Providing and fixing approved machine cut, machine polished 19-20mm thick Marble dado to walls/columns, as shown in drawing or as directed by the PM. Stone fixed with approved compatible adhesive complying with class C2TE OF BS EN 12002 and BS EN 12004over plastered surface to correct line, level and plumb. Joints are well cleaned and grouted with matching colour polymer based approved quality polymer based readymade grout and cured, cleaned, junctions with plaster finished smooth, etc. all complete at all heights and leads to the satisfaction of the PM. MR2 - Crema noce Marble cladding. (Location : Waiting area, Board room, Corridor, Reception, Cafeteria, Lounge) (Basic Rate - 450/Sqft)
1187
-
-
Providing and fixing approved machine cut, machine polished 19-20mm thick Marble dado to walls/columns, as shown in drawing or as directed by the PM. Stone fixed with approved compatible adhesive complying with class C2TE OF BS EN 12002 and BS EN 12004over plastered surface to correct line, level and plumb. Joints are well cleaned and grouted with matching colour polymer based approved quality polymer based readymade grout and cured, cleaned, junctions with plaster finished smooth, etc. all complete at all heights and leads to the satisfaction of the PM. MR3 - Brown armani Marble cladding. (Location : Recreation area) (Basic Rate - 450/Sqft)
70
-
-
Providing and fixing approved machine cut, machine polished 19-20mm thick Marble dado to walls/columns, as shown in drawing or as directed by the PM. Stone fixed with approved compatible adhesive complying with class C2TE OF BS EN 12002 and BS EN 12004over plastered surface to correct line, level and plumb. Joints are well cleaned and grouted with matching colour polymer based approved quality polymer based readymade grout and cured, cleaned, junctions with plaster finished smooth, etc. all complete at all heights and leads to the satisfaction of the PM. MR4 - Beige Travertino Marble cladding. (Location : Lift Lobby, Lounge) (Basic Rate - 500/Sqft)
282
-
-
Providing and fixing approved machine cut, machine polished 19-20mm thick Marble dado to walls/columns, as shown in drawing or as directed by the PM. Stone fixed with approved compatible adhesive complying with class C2TE OF BS EN 12002 and BS EN 12004over plastered surface to correct line, level and plumb. Joints are well cleaned and grouted with matching colour polymer based approved quality polymer based readymade grout and cured, cleaned, junctions with plaster finished smooth, etc. all complete at all heights and leads to the satisfaction of the PM. MR5 - Tobacco Brown Marble cladding. (Location : Lift Lobby, Lounge) (Basic Rate - 500/Sqft)
151
-
-
Providing and fixing approved machine cut, machine polished 19-20mm thick Marble dado to walls/columns, as shown in drawing or as directed by the PM. Stone fixed with approved compatible adhesive complying with class C2TE OF BS EN 12002 and BS EN 12004over plastered surface to correct line, level and plumb. Joints are well cleaned and grouted with matching colour polymer based approved quality polymer based readymade grout and cured, cleaned, junctions with plaster finished smooth, etc. all complete at all heights and leads to the satisfaction of the PM. but for Stone Cladding. (Location : Corridor, Lounge)
66
-
-
Providing and fixing approved machine cut, machine polished 19-20mm thick Marble dado to walls/columns, as shown in drawing or as directed by the PM. Stone fixed with approved compatible adhesive complying with class C2TE OF BS EN 12002 and BS EN 12004over plastered surface to correct line, level and plumb. Joints are well cleaned and grouted with matching colour polymer based approved quality polymer based readymade grout and cured, cleaned, junctions with plaster finished smooth, etc. all complete at all heights and leads to the satisfaction of the PM. but for MR3-Brown armani Marble cladding with 12mm x 6mm deep groove. (Location : Cafeteria) (Basic Rate - 450/Sqft)
26
-
-
Providing and fixing approved machine cut, machine polished 19-20mm thick Marble dado to walls/columns, as shown in drawing or as directed by the PM. Stone fixed with approved compatible adhesive complying with class C2TE OF BS EN 12002 and BS EN 12004over plastered surface to correct line, level and plumb. Joints are well cleaned and grouted with matching colour polymer based approved quality polymer based readymade grout and cured, cleaned, junctions with plaster finished smooth, etc. all complete at all heights and leads to the satisfaction of the PM. but for GR-Granite cladding. (Location : Toilet) (Basic Rate - 250/Sqft)
51
-
-
Designing, providing and fixing 19-20mm thick Marble Stone dry cladding as shown in the drawing etc., work shall include site measurements, coordination of pattern if any, preparing with required grooves, drilling for anchors, finishing surfaces, applying sealer coat etc. as detailed in drawing / specification / instruction / approved shop drawing for fixing / anchoring with concrete /masonry. Fitting and fixtures used shall be stainless steel (SS 316) material. Material supporting arrangements shown in the drawing is indicative and contractor shall make their own shop drawings and suggest method of fixing with type of anchors they propose to use for concrete/ masonry sections where they are to be fixed. Also including required grouting / sealing compounds for joints / junctions. Work shall include double legged independent scaffolding for entire height etc. the shop drawing to be submitted for Architect's approval. MR2 - Crema noce Marble cladding. (Location : Atrium) (Basic Rate - 450/Sqft)
215
-
-
Designing, providing and fixing 19-20mm thick Marble Stone dry cladding as shown in the drawing etc., work shall include site measurements, coordination of pattern if any, preparing with required grooves, drilling for anchors, finishing surfaces, applying sealer coat etc. as detailed in drawing / specification / instruction / approved shop drawing for fixing / anchoring with concrete /masonry. Fitting and fixtures used shall be stainless steel (SS 316) material. Material supporting arrangements shown in the drawing is indicative and contractor shall make their own shop drawings and suggest method of fixing with type of anchors they propose to use for concrete/ masonry sections where they are to be fixed. Also including required grouting / sealing compounds for joints / junctions. Work shall include double legged independent scaffolding for entire height etc. the shop drawing to be submitted for Architect's approval. MR4 - Beige Travertino Marble cladding. (Location : Atrium) (Basic Rate - 500/Sqft)
32
-
-
Designing, providing and fixing 19-20mm thick Marble Stone dry cladding as shown in the drawing etc., work shall include site measurements, coordination of pattern if any, preparing with required grooves, drilling for anchors, finishing surfaces, applying sealer coat etc. as detailed in drawing / specification / instruction / approved shop drawing for fixing / anchoring with concrete /masonry. Fitting and fixtures used shall be stainless steel (SS 316) material. Material supporting arrangements shown in the drawing is indicative and contractor shall make their own shop drawings and suggest method of fixing with type of anchors they propose to use for concrete/ masonry sections where they are to be fixed. Also including required grouting / sealing compounds for joints / junctions. Work shall include double legged independent scaffolding for entire height etc. the shop drawing to be submitted for Architect's approval. but for Dry Cladding in Crema noce Marble with Patti. . (Location : Atrium) (Basic Rate - 450/Sqft)
54
-
-
Designing, providing and fixing 19-20mm thick Marble Stone dry cladding as shown in the drawing etc., work shall include site measurements, coordination of pattern if any, preparing with required grooves, drilling for anchors, finishing surfaces, applying sealer coat etc. as detailed in drawing / specification / instruction / approved shop drawing for fixing / anchoring with concrete /masonry. Fitting and fixtures used shall be stainless steel (SS 316) material. Material supporting arrangements shown in the drawing is indicative and contractor shall make their own shop drawings and suggest method of fixing with type of anchors they propose to use for concrete/ masonry sections where they are to be fixed. Also including required grouting / sealing compounds for joints / junctions. Work shall include double legged independent scaffolding for entire height etc. the shop drawing to be submitted for Architect's approval. but for Dry Cladding in Crema noce marble with polish and rough Combination with Elliptical outer band in Crema noce and central part in Bronze armani. (Basic Rate - 450/Sqft)
26
-
-
Providing and fixing about 100mm high approved machine cut, machine polished 19-20mm thick Marble stone skirting over plastered surface or as detailed in drawing. Stone fixed by approved compatible adhesive (Bal or Laticrete or equivalent approved) on back to correct line, level and plumb. Joints are well cleaned grouted with matching colour ploymer based readymade approved quality grout, curing, cleaned and where specified or shown in drawing exposed edge of stone rounded / chamfered and polished, making grooves above skirting etc. complete to the entire satisfaction of the PM. MR1 - White Thauses Marble Skirting. (Location : ) (Basic Rate - 800/Sqft)
10
-
-
Providing and fixing about 100mm high approved machine cut, machine polished 19-20mm thick Marble stone skirting over plastered surface or as detailed in drawing. Stone fixed by approved compatible adhesive (Bal or Laticrete or equivalent approved) on back to correct line, level and plumb. Joints are well cleaned grouted with matching colour ploymer based readymade approved quality grout, curing, cleaned and where specified or shown in drawing exposed edge of stone rounded / chamfered and polished, making grooves above skirting etc. complete to the entire satisfaction of the PM. MR2 - Crema noce Marble Skirting. (Location : Reception, Corridor, Lift Lobby, Lounge) (Basic Rate - 450/Sqft)
476
-
-
Providing and fixing about 100mm high approved machine cut, machine polished 19-20mm thick Marble stone skirting over plastered surface or as detailed in drawing. Stone fixed by approved compatible adhesive (Bal or Laticrete or equivalent approved) on back to correct line, level and plumb. Joints are well cleaned grouted with matching colour ploymer based readymade approved quality grout, curing, cleaned and where specified or shown in drawing exposed edge of stone rounded / chamfered and polished, making grooves above skirting etc. complete to the entire satisfaction of the PM. MR3 - Brown armani Marble Skirting. (Location : Reception) (Basic Rate - 450/Sqft)
23
-
-
Providing and fixing about 100mm high approved machine cut, machine polished 19-20mm thick Marble stone skirting over plastered surface or as detailed in drawing. Stone fixed by approved compatible adhesive (Bal or Laticrete or equivalent approved) on back to correct line, level and plumb. Joints are well cleaned grouted with matching colour ploymer based readymade approved quality grout, curing, cleaned and where specified or shown in drawing exposed edge of stone rounded / chamfered and polished, making grooves above skirting etc. complete to the entire satisfaction of the PM. MR4 - Beige Travertino Marble Skirting. (Location : ) (Basic Rate - 500/Sqft)
10
-
-
Providing and fixing about 100mm high approved machine cut, machine polished 19-20mm thick Marble stone skirting over plastered surface or as detailed in drawing. Stone fixed by approved compatible adhesive (Bal or Laticrete or equivalent approved) on back to correct line, level and plumb. Joints are well cleaned grouted with matching colour ploymer based readymade approved quality grout, curing, cleaned and where specified or shown in drawing exposed edge of stone rounded / chamfered and polished, making grooves above skirting etc. complete to the entire satisfaction of the PM. MR5 - Tobacco Brown Marble Skirting. (Location : ) (Basic Rate - 500/Sqft)
10
-
-
Providing and fixing 2mm thick Vinyl flooring of approved make in rolls or tiles, in shade and colour of manufaturer confirming to IS and as approved by Architect. Flooring to be fixed over dry hardened existing IPS (paid separately under separate item), fixed with adhesive as recommended by the the approved manufacturer. Floor to be levelled and cleaned. Joints shall be welded and flushed cut where specified as recommended by the the approved manufacturer etc. all complete as per recommendations of the approved manufacturer and to the entire satisfaction of the PM. (Basic Rate - 350/Sqft). Vinyl 1 Flooring. (Location : Recreation area)
92
-
-
Providing and fixing 2mm thick Vinyl flooring of approved make in rolls or tiles, in shade and colour of manufaturer confirming to IS and as approved by Architect. Flooring to be fixed over dry hardened existing IPS (paid separately under separate item), fixed with adhesive as recommended by the the approved manufacturer. Floor to be levelled and cleaned. Joints shall be welded and flushed cut where specified as recommended by the the approved manufacturer etc. all complete as per recommendations of the approved manufacturer and to the entire satisfaction of the PM. (Basic Rate - 350/Sqft). Vinyl 2 Flooring. (Location : Recreation area)
47
-
-
Providing and fixing 100mm high Vinyl Skirting fixed by approved adhesive. (Location Recreation area) (Basic Rate - 350/Sqft)
95
-
-
Providing and fixing in place 6mm thk and 38mm high s.s plate inserted on the floor within the junction of the carpet/tile/marble and as per instruction.
227
-
-
Providing and fixing of 19-20mm thick machine cut, machine polished Marble stone of approved quality wash basin counter top about 600mm wide fixed and bedded over 19mm thick Indian Marble; with mirror polished Marble fascia in verticle profile as detailed in drawing. Stones for 200mm wide fascia fixed with epoxy adhesive; exposed faces / edges, rounded / chamfered, mirror polished etc. complete to the approval of the PM. All junctions shall be sealed with silicon sealant. Further to include required GI framing, drilling, cutting of holes, SS pins, anchors, clamps, finishing junctions with plaster etc. complete as directed by the PM to his entire satisfaction. Brown Armani marble stone counter. (Location : Toilets) (Basic Rate - 450/Sqft)
50
-
-
Providing and fixing of 19-20mm thick machine cut, machine polished Marble stone of approved quality wash basin counter top about 600mm wide fixed and bedded over 19mm thick Indian Marble; with mirror polished Marble fascia in verticle profile as detailed in drawing. Stones for 200mm wide fascia fixed with epoxy adhesive; exposed faces / edges, rounded / chamfered, mirror polished etc. complete to the approval of the PM. All junctions shall be sealed with silicon sealant. Further to include required GI framing, drilling, cutting of holes, SS pins, anchors, clamps, finishing junctions with plaster etc. complete as directed by the PM to his entire satisfaction. Crema noce marble stone counter. (Location : Toilets) (Basic Rate - 450/Sqft)
62
-
-
Providing, constructing Granite platform as per Architectural drawing; out of a) 18 mm thick 600 mm wide mirror polished approved Granite stone exposed faces / edges rounded and mirror polished. (Top of the counter). b) 18 mm thick 75 mm wide granite fascia exposed edges mirror polished and moulded as detailed. c) 18mm thick 50mm high approved Granite stone back splash exposed edges mirror polished and moulded as detailed. d) 50 mm thick 600 mm wide cudappa sandwiched vertical partition both exposed faces and edge polished. e) 25 mm thick 600 mm wide cudappa under Granite. f) 18 mm thick 550mm wide one side polished Granite stone for shelf as shown in drawing. Granite stones shall be anchored and grouted with stainless steel pins, clamps and anchor fasteners into concrete and wall, Granite stone at bed shall be bedded in cement sand mortar (1:4) with required cement punning, fascia shall be fixed with epoxy resin work shall include require drilling of hole, making notches, grooves, grouting with epoxy and cement finishing, curing all complete as per detail drawing of Architect and as per instruction from PM from time to time. Further work shall include required cutting in granite to receive stainless steel sink polishing of cut edges to the approval of PM. All joints with masonry stone work and stainless steel sink shall be sealed with silicon sealant. (Basic Rate - 250/Sqft)
34
-
-
Providing, constructing Granite platform as per Architectural drawing; out of a) 18 mm thick 600 mm wide mirror polished approved Granite stone exposed faces / edges rounded and mirror polished. (Top of the counter). b) 18 mm thick 75 mm wide granite fascia exposed edges mirror polished and moulded as detailed. c) 18mm thick 50mm high approved Granite stone back splash exposed edges mirror polished and moulded as detailed. d) 50 mm thick 600 mm wide cudappa sandwiched vertical partition both exposed faces and edge polished. e) 25 mm thick 600 mm wide cudappa under Granite. f) 18 mm thick 550mm wide one side polished Granite stone for shelf as shown in drawing. Granite stones shall be anchored and grouted with stainless steel pins, clamps and anchor fasteners into concrete and wall, Granite stone at bed shall be bedded in cement sand mortar (1:4) with required cement punning, fascia shall be fixed with epoxy resin work shall include require drilling of hole, making notches, grooves, grouting with epoxy and cement finishing, curing all complete as per detail drawing of Architect and as per instruction from PM from time to time. Further work shall include required cutting in granite to receive stainless steel sink polishing of cut edges to the approval of PM. All joints with masonry stone work and stainless steel sink shall be sealed with silicon sealant. but for MR3 - Brown armani Marble counter. (Basic Rate - 450/Sqft)
14
-
-
Providing and fixing about machine cut, polished approved Marble stone sills, jambs, soffits etc., in required shape with required grooves, mouldings, chamfering / rounding edges, polishing etc. also include required pins / cram etc. for holding down complete including fixing with approved tile adhesive (Bal or Laticrete), pointing, curing, cleaning, polishing etc. complete to the approval of the PM. a) Ledge to be finished in Corian with center band in Mirror. (Location : ED/GM Cabins, Meeting room 1 & 2, Reception)
17
-
-
Providing and fixing about machine cut, polished approved Marble stone sills, jambs, soffits etc., in required shape with required grooves, mouldings, chamfering / rounding edges, polishing etc. also include required pins / cram etc. for holding down complete including fixing with approved tile adhesive (Bal or Laticrete), pointing, curing, cleaning, polishing etc. complete to the approval of the PM. b) Crema noce marble Window sill. (Basic Rate - 450/Sqft)
261.2
-
-
Providing and fixing about machine cut, polished approved Marble stone sills, jambs, soffits etc., in required shape with required grooves, mouldings, chamfering / rounding edges, polishing etc. also include required pins / cram etc. for holding down complete including fixing with approved tile adhesive (Bal or Laticrete), pointing, curing, cleaning, polishing etc. complete to the approval of the PM. c) MR3 - Brown armani marble Thresold. (Location : Toilets) (Basic Rate - 450/Sqft)
22
-
-
Providing and fixing about machine cut, polished approved Marble stone sills, jambs, soffits etc., in required shape with required grooves, mouldings, chamfering / rounding edges, polishing etc. also include required pins / cram etc. for holding down complete including fixing with approved tile adhesive (Bal or Laticrete), pointing, curing, cleaning, polishing etc. complete to the approval of the PM. d) MR3 - Brown armani marble door jambs & soffits. (Location : Toilets) (Basic Rate - 450/Sqft)
181
-
-
Providing and fixing about machine cut, polished approved Marble stone sills, jambs, soffits etc., in required shape with required grooves, mouldings, chamfering / rounding edges, polishing etc. also include required pins / cram etc. for holding down complete including fixing with approved tile adhesive (Bal or Laticrete), pointing, curing, cleaning, polishing etc. complete to the approval of the PM. e) 50mm thick MDF ledge to be finished in corian. (Location : Toilets)
4
-
-
Providing and fixing about machine cut, polished approved Marble stone sills, jambs, soffits etc., in required shape with required grooves, mouldings, chamfering / rounding edges, polishing etc. also include required pins / cram etc. for holding down complete including fixing with approved tile adhesive (Bal or Laticrete), pointing, curing, cleaning, polishing etc. complete to the approval of the PM. f) 75mm thick MDF ledge to be finished in corian. (Location : Toilets)
6
-
-
Providing and fixing about machine cut, polished approved Marble stone sills, jambs, soffits etc., in required shape with required grooves, mouldings, chamfering / rounding edges, polishing etc. also include required pins / cram etc. for holding down complete including fixing with approved tile adhesive (Bal or Laticrete), pointing, curing, cleaning, polishing etc. complete to the approval of the PM. g) GR - Granite Thresold. (Location : Toilets) (Basic Rate - 250/Sqft)
15
-
-
Providing and fixing about machine cut, polished approved Marble stone sills, jambs, soffits etc., in required shape with required grooves, mouldings, chamfering / rounding edges, polishing etc. also include required pins / cram etc. for holding down complete including fixing with approved tile adhesive (Bal or Laticrete), pointing, curing, cleaning, polishing etc. complete to the approval of the PM. h) GR - Granite door jambs & soffits. (Location : Toilets) (Basic Rate - 250/Sqft)
90
-
-
Providing and fixing about machine cut, polished approved Marble stone sills, jambs, soffits etc., in required shape with required grooves, mouldings, chamfering / rounding edges, polishing etc. also include required pins / cram etc. for holding down complete including fixing with approved tile adhesive (Bal or Laticrete), pointing, curing, cleaning, polishing etc. complete to the approval of the PM. i) MR3 - Brown armani marble sill on Ledge wall. (Location : Toilets) (Basic Rate - 450/Sqft)
6
-
-
Providing and fixing about machine cut, polished approved Marble stone sills, jambs, soffits etc., in required shape with required grooves, mouldings, chamfering / rounding edges, polishing etc. also include required pins / cram etc. for holding down complete including fixing with approved tile adhesive (Bal or Laticrete), pointing, curing, cleaning, polishing etc. complete to the approval of the PM. j) 200mm wide jamb to be finished in Crema noce. (Basic Rate - 450/Sqft)
17
-
-
Providing and constructing Bain marie counter in 2 levels in the café. Top level to be 300mm wide @950mm high, top and front facie to be finished in Brown armani,including 200mm high band to be brown armani, bottom to recessed by 25mm and 200mm high to be finished in crème noce. Above finish to be cladded onto 200m thk wall, inside to be cladded in 300x300mm ceramic tile. Inner counter top to be @ 750mm level to be constructed with base and verticals in indian marble with top in granite of approved sample. Cost to include necessary cutout required for any vessels etc. Bottom of the counter to have shutters in water proof Marine ply and finished in laminate, including profile handles and hardware. (Basic Rate - 450/Sqft)
12
-
-
False Ceiling Works
-
-
-
Providing and fixing 12.5mm thick plain or coffered Gypsum False Ceiling manufactured of approved make on G.I. frame work, in G.I. vertical supports at every 450mm c/c and horizontal runners at every 900mm c/c in SS screws to proper line and level. Cost to be inclusive of making holes and required framing for fixing electrical fixtures, A.C. grills. Area of electrical fixtures will be paid full with ply on top of ceiling fixed to G.I. supports to receive spotlights including cutting hole etc., complete. G.I. metal frame to be of 22 gauge folded strip of 50mm width to be used. All complete as per PM's instructions and specifications. The grid of frame work to be supported at every 1500mm x 1500mm interval by M.S. Rod anchored to the slab to support the G.I. framework. All vertical G.I. framework to be anchored to the slab by means of anchor fasteners including all lighting troughs, coffers, cornices and all other related works. Cost to be inclusive of necessary scaffolding required towards the same. Rate to include finishing with Emulsion paint in approved shade, colour and make.
3838
-
-
Providing and fixing 12.5mm thick plain or coffered Gypsum False Ceiling manufactured of approved make on G.I. frame work, in G.I. vertical supports at every 450mm c/c and horizontal runners at every 900mm c/c in SS screws to proper line and level. Cost to be inclusive of making holes and required framing for fixing electrical fixtures, A.C. grills. Area of electrical fixtures will be paid full with ply on top of ceiling fixed to G.I. supports to receive spotlights including cutting hole etc., complete. G.I. metal frame to be of 22 gauge folded strip of 50mm width to be used. All complete as per PM's instructions and specifications. The grid of frame work to be supported at every 1500mm x 1500mm interval by M.S. Rod anchored to the slab to support the G.I. framework. All vertical G.I. framework to be anchored to the slab by means of anchor fasteners including all lighting troughs, coffers, cornices and all other related works. Cost to be inclusive of necessary scaffolding required towards the same. Rate to include finishing with Emulsion paint in approved shade, colour and make. But for curved vault ceiling. (Location : Lift Lobby at 8th Floor)
310
-
-
Providing and fixing 12.5mm thick plain or coffered Gypsum False Ceiling manufactured of approved make on G.I. frame work, in G.I. vertical supports at every 450mm c/c and horizontal runners at every 900mm c/c in SS screws to proper line and level. Cost to be inclusive of making holes and required framing for fixing electrical fixtures, A.C. grills. Area of electrical fixtures will be paid full with ply on top of ceiling fixed to G.I. supports to receive spotlights including cutting hole etc., complete. G.I. metal frame to be of 22 gauge folded strip of 50mm width to be used. All complete as per PM's instructions and specifications. The grid of frame work to be supported at every 1500mm x 1500mm interval by M.S. Rod anchored to the slab to support the G.I. framework. All vertical G.I. framework to be anchored to the slab by means of anchor fasteners including all lighting troughs, coffers, cornices and all other related works. Cost to be inclusive of necessary scaffolding required towards the same. But with 12.5mm thick Calcium Silicate Board (of Hilux or equivalent approved), include finishing with waterproof paint in approved shade, colour and make.
1083
-
-
Providing and fixing of Armstrong Techzone Suspended ceiling system (Module TZ2) or equivalent with Optra Board edge tiles 20mmmm thick with approved 24mm Prelude exposed grid system. (Location : 8th Floor & 9th Floor Corridor). 'The ceiling system shall ceiling module of 1200x300 and the on centre spacing between two adjacent technical zones is 1200 mm. The Techzone orientation is such that the main runners run parallel to the technical zone and hence making this layout compatible with continuous lighting fixtures or Air diffusers. Optra field panel is of size 1050x1200x20mm mm. The 150mm wide technical zone formed is where the technical elements like lighting fixtures & air diffusers would be installed. Where there are no technical elements the technical zone would be covered by using Optra or Metal Technical Panels of size 1200mm x150mm in conjunction with a special 150mm long cross tee. The Dune panels should have Humidity Resistance (RH) of 95, NRC 0.9, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7), suitable for Green Building application, with Recycled content of 38 - 41%. The panels shall be laid on Prelude 38 with 24 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner & 1200 mm Cross Tees with a web height of 38mm. The T Sections have a Galvanizing of 90 grams per M2. 'INSTALLATION: Technical zones to be formed by using 2 main runners which run parallel to each other at a distance of 150mm and thus forming a Technical zone of 150mm. The on centre spacing between two adjacent technical zones to be 1200mm. Thus we get a module of 1200x1200mm where 1200 is the on centre spacing between the adjacent technical zones. To lay the field panel of size 1050x1200mm, flush fitting 1050mm long cross tees to be interlocked between main runners at 1200mm centre. The technical zone where there are no technical elements can be covered using the technical panels of size 1200mm x 150mm. These technical panels to be laid in the technical zone using a special 150mm long cross tee interlocked at every 1200mm in the technical zone. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres. SUSPENSION SYSTEM accessories as per approved manufacturer consisting of M6 Anchor Fasteners with Vertical Hangers made of Galvanised steel of size 26 x 26 x 25 x 1.2mm with a Galvanised Thickness of 80gsm, A pre Straightened Hanger wire of dia – 2.68 mm of 1.83 m length., thickness of 80gsm and a tensile strength of 344-413 MPa, along with Adjustable hook clips of 0.8mm thick, galvanised spring steel for 2.68 mm with a minimum pull strength of 110 kg. The adjustable clip also consists of a 3.5 mm aquiline wire to be used with the main runner.
219
-
-
Providing and fixing in true horizontal level Mineral fibre false ceiling system manufactured by M/s. Armstrong World Industries or equivalent using hot dipped galvanized steel section, exposed surface with pre-coated capping, main tee of size 24 x 32 mm, having 0.27 mm gauge at every 1200 mm. centre to centre maximum and rotary stitched cross tee of size 24 x 27 mm, having 0.27 mm gauge at every 600 mm c/c. and sub cross tee of size 24 x 27 mm, having 0.25 mm gauge at 1200 mm c/c. and wall angle of size 19 x 19 mm., having 0.35 mm gauge fixed to the periphery of the wall. The above grid is suspended at every 1200mm c/c. in both directions using 2.0 mm. thick pre-straightened GI wire laying FINE FISSURED TEGULAR Edge ceiling tiles manufactured by M/s. Armstrong World Industries, of size 600mm x 600mm x 20mm having NRC 0.70, Light reflectance of 85%, thermal conductivity k = 0.052-0.057 W/m0K, Humidity Resistance of 99%, having Fire Performance CLASS O / CLASS 1 (BS 476), surface having 3 coats of approved paint with Fine Fissured, back of the tile duly sanded and finished with a coat of protective paint over the formed grid complete etc. as per approved manufacturer's specifications and directions of the PM.
10
-
-
Providing and fixing Wooden False ceiling made out of 12mm thick MDF boards finished with approved veneer, including aluminium framing system covered in 12mm thick MDF, edging angles including cutting and making arrangement with required reinforcement to fix light fillings, AC grills, access services doors/panel required double legged scaffolding / staging, finishing joints smooth to correct line and level complete with melamine polish in approved shade all as approved reflected false ceiling layout to approval and satisfaction of the PM.
187
-
-
Providing and fixing Wooden False ceiling made out of 12mm thick MDF boards finished with approved veneer, including aluminium framing system covered in 12mm thick MDF, edging angles including cutting and making arrangement with required reinforcement to fix light fillings, AC grills, access services doors/panel required double legged scaffolding / staging, finishing joints smooth to correct line and level complete with melamine polish in approved shade all as approved reflected false ceiling layout to approval and satisfaction of the PM. But for Wooden False ceiling made out of 12mm thick MDF boards finished with approved laminate.
64
-
-
Wall Paneling & Partition Works
-
-
-
Providing, constructing & fixing approved paneling using MDF boards of approved make and confirming to IS 3087; fixed on Aluminum framing as shown in drawing. Aluminium framing to be fixed and anchored to slabs at bottom and at top to beams using SS anchor fasteners. Pattern of paneling to be as indicated in drawings with extra pattas of plywood of required thickness to be provided so as to produce dubbed / raised panel as required.Paneling to be ready to receive finishing in veneer / laminate, as indicated. Grooves to be provided at junction of skirting & flooring to enable carpets to slide in. Paneling to be paid for only upto bottom of cornices below ceiling. Paneling to be as per elevations indicated in drawings & required surface differences not to be paid for separately. Thicker localized paneling for achieving line, level, plumb in case of workmanship differences not to be paid for separately. Only elevational surface of paneling to be measured upto a thickness of 75mm. For thickness exceeding 75mm side surfaces to form quantities in Sq.mt. Cost also to include providing grooves and pattas in MDF, wherever required so as to produce dubbed panel as required in existing paneling, wherever required. All complete as per Architectural drawings and to the entire satisfaction of PM. Finished area shall be measured for payment. No deduction will be made for openings/cut outs upto 0.5 sq.m. 75mm thick MDF Paneling
367
-
-
Providing, constructing & fixing approved paneling using MDF boards of approved make and confirming to IS 3087; fixed on Aluminum framing as shown in drawing. Aluminium framing to be fixed and anchored to slabs at bottom and at top to beams using SS anchor fasteners. Pattern of paneling to be as indicated in drawings with extra pattas of plywood of required thickness to be provided so as to produce dubbed / raised panel as required.Paneling to be ready to receive finishing in veneer / laminate, as indicated. Grooves to be provided at junction of skirting & flooring to enable carpets to slide in. Paneling to be paid for only upto bottom of cornices below ceiling. Paneling to be as per elevations indicated in drawings & required surface differences not to be paid for separately. Thicker localized paneling for achieving line, level, plumb in case of workmanship differences not to be paid for separately. Only elevational surface of paneling to be measured upto a thickness of 75mm. For thickness exceeding 75mm side surfaces to form quantities in Sq.mt. Cost also to include providing grooves and pattas in MDF, wherever required so as to produce dubbed panel as required in existing paneling, wherever required. All complete as per Architectural drawings and to the entire satisfaction of PM. Finished area shall be measured for payment. No deduction will be made for openings/cut outs upto 0.5 sq.m. 25mm thick MDF Paneling
52
-
-
Providing, constructing & fixing approved paneling using MDF boards of approved make and confirming to IS 3087; fixed on Aluminum framing as shown in drawing. Aluminium framing to be fixed and anchored to slabs at bottom and at top to beams using SS anchor fasteners. Pattern of paneling to be as indicated in drawings with extra pattas of plywood of required thickness to be provided so as to produce dubbed / raised panel as required.Paneling to be ready to receive finishing in veneer / laminate, as indicated. Grooves to be provided at junction of skirting & flooring to enable carpets to slide in. Paneling to be paid for only upto bottom of cornices below ceiling. Paneling to be as per elevations indicated in drawings & required surface differences not to be paid for separately. Thicker localized paneling for achieving line, level, plumb in case of workmanship differences not to be paid for separately. Only elevational surface of paneling to be measured upto a thickness of 75mm. For thickness exceeding 75mm side surfaces to form quantities in Sq.mt. Cost also to include providing grooves and pattas in MDF, wherever required so as to produce dubbed panel as required in existing paneling, wherever required. All complete as per Architectural drawings and to the entire satisfaction of PM. Finished area shall be measured for payment. No deduction will be made for openings/cut outs upto 0.5 sq.m. 50mm thick curve MDF Paneling
31
-
-
Providing, constructing & fixing approved paneling using MDF boards of approved make and confirming to IS 3087; fixed on Aluminum framing as shown in drawing. Aluminium framing to be fixed and anchored to slabs at bottom and at top to beams using SS anchor fasteners. Pattern of paneling to be as indicated in drawings with extra pattas of plywood of required thickness to be provided so as to produce dubbed / raised panel as required.Paneling to be ready to receive finishing in veneer / laminate, as indicated. Grooves to be provided at junction of skirting & flooring to enable carpets to slide in. Paneling to be paid for only upto bottom of cornices below ceiling. Paneling to be as per elevations indicated in drawings & required surface differences not to be paid for separately. Thicker localized paneling for achieving line, level, plumb in case of workmanship differences not to be paid for separately. Only elevational surface of paneling to be measured upto a thickness of 75mm. For thickness exceeding 75mm side surfaces to form quantities in Sq.mt. Cost also to include providing grooves and pattas in MDF, wherever required so as to produce dubbed panel as required in existing paneling, wherever required. All complete as per Architectural drawings and to the entire satisfaction of PM. Finished area shall be measured for payment. No deduction will be made for openings/cut outs upto 0.5 sq.m. 12mm thick MDF 3D design paneling finished with Duco paint.
26
-
-
Providing, constructing & fixing approved paneling using MDF boards of approved make and confirming to IS 3087; fixed on Aluminum framing as shown in drawing. Aluminium framing to be fixed and anchored to slabs at bottom and at top to beams using SS anchor fasteners. Pattern of paneling to be as indicated in drawings with extra pattas of plywood of required thickness to be provided so as to produce dubbed / raised panel as required.Paneling to be ready to receive finishing in veneer / laminate, as indicated. Grooves to be provided at junction of skirting & flooring to enable carpets to slide in. Paneling to be paid for only upto bottom of cornices below ceiling. Paneling to be as per elevations indicated in drawings & required surface differences not to be paid for separately. Thicker localized paneling for achieving line, level, plumb in case of workmanship differences not to be paid for separately. Only elevational surface of paneling to be measured upto a thickness of 75mm. For thickness exceeding 75mm side surfaces to form quantities in Sq.mt. Cost also to include providing grooves and pattas in MDF, wherever required so as to produce dubbed panel as required in existing paneling, wherever required. All complete as per Architectural drawings and to the entire satisfaction of PM. Finished area shall be measured for payment. No deduction will be made for openings/cut outs upto 0.5 sq.m. Alabaster lit Panel as Backdrop
2
-
-
Providing, constructing & fixing in place MDF board Partitions of overall thickness 75mm thk. with aluminium framing at every 450mm c/c with 12mm thick MDF board (conforming to IS 3087) of approved make on both sides. All other salient features such as pattas, grooves, inlay pattis & extra frame work and all other features indicated in drawing or as per instructions of PM to be the same as items of panelling. Mode of measurements also to be same as that of mentioned in panelling items. Cost of partition also to include providing, constructing & fixing ply frame with necessary rebates as required to enable fixing of doors (on 3 sides of opening produced). Finishing items to be provided only on visually exposed surfaces of panelling & partitions and not on areas covered by storages, tables, fabric etc. All complete as per PM instructions and specifications. Cost also to include 50mm thick glass wool insulation of 48kg/cum density inside partitions. Cost also to include 50mm thick glass wool insulation (of approved make) wherever specified in drawings as per instruction of PM.
1694
-
-
Providing, constructing & fixing in place MDF board Partitions of overall thickness 75mm thk. with aluminium framing at every 450mm c/c with 12mm thick MDF board (conforming to IS 3087) of approved make on both sides. All other salient features such as pattas, grooves, inlay pattis & extra frame work and all other features indicated in drawing or as per instructions of PM to be the same as items of panelling. Mode of measurements also to be same as that of mentioned in panelling items. Cost of partition also to include providing, constructing & fixing ply frame with necessary rebates as required to enable fixing of doors (on 3 sides of opening produced). Finishing items to be provided only on visually exposed surfaces of panelling & partitions and not on areas covered by storages, tables, fabric etc. All complete as per PM instructions and specifications. Cost also to include 50mm thick glass wool insulation of 48kg/cum density inside partitions. Cost also to include 50mm thick glass wool insulation (of approved make) wherever specified in drawings as per instruction of PM. But for Free Standing Partition. 100mm thick Free Standing Partition.
15
-
-
Providing, constructing & fixing in place MDF board Partitions of overall thickness 75mm thk. with aluminium framing at every 450mm c/c with 12mm thick MDF board (conforming to IS 3087) of approved make on both sides. All other salient features such as pattas, grooves, inlay pattis & extra frame work and all other features indicated in drawing or as per instructions of PM to be the same as items of panelling. Mode of measurements also to be same as that of mentioned in panelling items. Cost of partition also to include providing, constructing & fixing ply frame with necessary rebates as required to enable fixing of doors (on 3 sides of opening produced). Finishing items to be provided only on visually exposed surfaces of panelling & partitions and not on areas covered by storages, tables, fabric etc. All complete as per PM instructions and specifications. Cost also to include 50mm thick glass wool insulation of 48kg/cum density inside partitions. Cost also to include 50mm thick glass wool insulation (of approved make) wherever specified in drawings as per instruction of PM. But for Free Standing Partition. 150mm thick Free Standing Partition.
5
-
-
Providing, constructing and fixing 25mm thick laser cut decorative Jali made out of approved MDF board consisting of followings- Base / pedestal of MDF board and approved wooden framing as per drawing, Multi stepped approved wooden moulding, 25mm thick decorative MDF Jali fixed on approved teak wood framing, Cost also to include teak wood edges and lipping patti as per drawing and as per PM's instructions. Making cut-outs for lighting provision as shown in the drawing. Further all wooden framing / moulding made out of approved quality teak wood, kiln-seasoned, anti-termite treated, shaped, grooved, including use of exterior quality approved water repellent adhesive, SS screws, pins, clamps etc. and coated with approved wood primer etc. Including all MDF surfaces to be finished with approved veneer and satin melamine polish with necessary fittings and fixtures etc. also including wooden moulding to be finished with melamine polish of approved make, colour and shade etc. all complete as shown in the drawing and directions and satisfaction of the PM.'- Making cut-outs for lighting provision as shown in the drawing
7
-
-
Providing and fixing actual free standing bamboo partition to act as screen. Top and bottom of the bamboo to have metal caps im metal to be prowder coated and anchored at top and bottom as per instruction. Bamboo to be lacquer coated with proper finish.
24
-
-
Providing and fixing veneer over MDF partitions/panelling and finishing with melamine polishing in approved shade as per design and / or instructions of PM. (Basic Rate - 200/Sqft)
882
-
-
Providing and fixing approved Leather on panelling/partition, fixed with 50mm thick 'U' foam having 24 kg /Cum density wound over existing 19mm thick plywood padding. Further providing and fixing 25mm x 10mm thick approved metal trim/strip at junction of stone skirting and leather paneling. Leather paneling have stitching of matching colour on all sides as per design and / or instructions of PM. (Basic Rate - 5000/RMT)
89
-
-
Providing & Fixing laminate finished over existing MDF Partition/Paneling.
459
-
-
Providing and fixing approved Fabric-1 on panelling fixed with 19mm thick 'U' foam having 24 kg/cum density (Mikron or equivalent) wound over existing MDF partition. Fabric paneling having stitching of matching colour on all sides as per design and / or instructions of PM. (Basic Rate - 1200/RMT)
139
-
-
Providing and fixing approved Fabric-2 on panelling fixed with 19mm thick 'U' foam having 24 kg/cum density (Mikron or equivalent) wound over existing MDF partition. Fabric paneling having stitching of matching colour on all sides as per design and / or instructions of PM. (Basic Rate - 1200/RMT)
31
-
-
Providing, constructing and fixing in place 6mm thick Lacquered glass of approved make and colour fixed on panelling/Partition.
98
-
-
Providing and fixing 25mm x 25mm Teak wood batten made out of approved quality teak wood, kiln-seasoned, anti-termite treated, shaped, grooved, including use of exterior quality approved water repellent adhesive, GI screws, pins, etc. Also to include Melamine polish in approved colour and shade etc. all complete at all leads, lifts, heights as per detailed specifications to the entire satisfaction of the PM.
50
-
-
Providing and fixing 25mm x 25mm Teak wood batten made out of approved quality teak wood, kiln-seasoned, anti-termite treated, shaped, grooved, including use of exterior quality approved water repellent adhesive, GI screws, pins, etc. Also to include Melamine polish in approved colour and shade etc. all complete at all leads, lifts, heights as per detailed specifications to the entire satisfaction of the PM. But for 25mm x 25mm Wood batten finished in Melamine with Groove 12mm x 12mm to achive the pattern.
14
-
-
Providing and fixing 25mm x 25mm Teak wood batten made out of approved quality teak wood, kiln-seasoned, anti-termite treated, shaped, grooved, including use of exterior quality approved water repellent adhesive, GI screws, pins, etc. Also to include Melamine polish in approved colour and shade etc. all complete at all leads, lifts, heights as per detailed specifications to the entire satisfaction of the PM. But for 38mm x 75mm Wooden batten finished in Melamine as shown in the drawing.
9
-
-
Providing and fixing Wooden carving. (Location : Auditorium at 4th Floor)
15
-
-
Providing & fixing in position, Stretch fabric (oceanz acoustics) by using FR grade acoustically transparent fabric, abrasion & flame resistant as per approved color. Fabric shall be stretched by using wooden base 10mm thick, rigid vinyl Stretch tracks half wrap/ full wrap 12.5mm and Midseam 12.5mm, chicken mesh as required, polyester wadding fibre (oceanz acoustics) required GSM infill with requisite accessories & tools. All material to be approved by the Acoustic Consultant prior to installation. Wooden base 10mm is first installed on the wall along the marking lines with metal fasteners at 300mm centers. The system to be mounted on 50 x 50mm GI frame. Tracks to be installed on wooden base, by first applying stick adhesive on both surfaces for a true and continuous secure grip, and heavy-duty fasteners at 15mm centers on one/ both sides of Stretch Tracks. NRC better than 0.8. including cost of necessary scaffolding as required.
62
-
-
Providing and fixing curtains in fabric of approved colour and pattern with double pleats and fall with lining fabric behind including fixing with suitable / approved SS hooks for curtains within pelmets or windows with Walltrack or approved make. (Area of finished curtain unit not the area of cloth shall be measured for payment)
122
-
-
Providing and fixing wall paper of approved make, design, shade and colour including preparing surfaces, filling up with gypsum or approved filler, cleaning and making surface dust-free, applying a sealer or primer coat as recommended by approved manufacturer, required scaffolding, cleaning and protecting till the handing over of site to the employer all complete to the entire satisfaction of the PM.
10
-
-
Providing and fixing 6mm thick Mirror of approved make over paneling/partition/wall fixed on 18mm thick MDF with 3M tape, including beveling of mirror edges,countersunk SS screws, wood beading and edging etc. all complete as per drawings and to the entire satisfaction of PM.
187
-
-
Providing and fixing 6mm thick Lacquered glass sandwiched urinal partition.
17
-
-
Providing and fixing manually operated roller blinds (with sunscreen fabric in spring mechanism) of approved make, shade and colour including all accessories track, chain etc. The blinds shall extend minimum by 100 mm beyond all four sides of the opening. All complete at all levels and as per approved manufacturer's specification and direction of PM. Area of opening shall be measured for payment. (Basic Rate - 350/Sqft)
699
-
-
Providing and fixing motorised roller blinds as per (aproove make by Somfy) specification including track, ting gear, weights, chain etc. as per approved shade. The blinds shall extend minimum / upto 10cm beyond of opening of all four sides. (For payment purpose area of opening shall be measured)
5
-
-
Providing and fixing 18 mm thick,150 mm wide pelmet of MDF boards of approved make and confirming to IS 3087, including top cover of 6 mm MDF veneer board, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete
7
-
-
Designing, providing, fabricating and fixing in position Green wall system supproted on SS framing using 10mm dia SS (316 grade) rod, clear SS strings in tension for creeepers of approved make etc., as detailed in Structural and Architectural concept drawings and approved in shop drawing; including required fixtures and fittings of stainless steel (SS 304), anchor fasteners / hooks, required flashings / trims, jointing and sealing with approved silicon sealant, and finishing junctions with steel, concrete, stone, timber, aluminium, glass, etc. all complete. to the entire satisfaction of PM. Further include required preparation of shop drawings and getting approval from the Architect and Structural Consultant, providing samples, mockups, taking actual site measurements and modifying and coordinating with site and fabrication yard, all conforming to international standards etc. complete to the approval of PM. System to be inclusive of Misting system, trigger system to activate misting system at prescribed time intervals.
16
-
-
Providing & fixing 25mm diameter (1.5mm thick) SS 304 satin (brush) finish Disabled Grab Rails/ handle of 600mm long of approved make with necessary SS 304 grade screws etc. complete as per drawing as sample approved by Engineer-in-charge. Rate shall be for all heights, all floors and all places.
4
-
-
Providing and fixing 12.5mm thick Double board Gypsum paneling on existing wall / partition with aluminium framing (as mentioned above in partition item) and necessary screws, nails, pins, clamps etc. as detailed in drawing. Panel to be properly screwed to the back. Edges of the additional panel to be properly cut and finished.
984
-
-
Joinery Works
-
-
-
Providing, making and fixing Hard wood door frames made out of approved quality teak wood, kiln-seasoned, anti-termite treated, shaped, grooved, mitered joint arrangement including use of exterior quality approved water repellent adhesive, GI screws, pins, etc. Also to include White enamle paint in approved colour and shade, surfaces of frame in contact with masonry/concrete surfaces shall be painted with one coat of hot bitumen of approved quality, 3 nos. (minimum) GI holdfast (split end 225mm x 75mm x 2 mm thick) on each side of frame well-grouted with cement concrete mix in a ratio of 1:2:4 (1 Cement : 2 Sand : 4 Aggregate), etc. all complete at all leads, lifts, heights as per detailed specifications to the entire satisfaction of the PM. 100mm x 60mm (Location : Meeting room 1 & 2, ED/GM cabins, Cabin 1 to 12, Archive room 1 to 4, Printing area, Pantry, Director's cabin, Toilets)
792
-
-
Providing and fixing factory made 35mm thick solid core flush shutters conforming to IS 2202 Part I, internally lipped, with exterior quality synthetic adhesive as manufactured by M/s Anchor or equivalent approved make. Further shutter shall be finished with approved laminate on both sides, shade and colour and design, edges of shutters shall be provided with 35mm x 6mm thick teakwood beading using exterior quality synthetic adhesive, headless GI nails, screws, beading finished with melamine polish, etc. (Beading Kiln seasoned, antitermite treated) including ironmongeries as per schedule and drawings all complete to entire satisfaction of the PM. D1 - Single leaf door shutter (Structural opening size - 900mm x 2975mm) (Location : Archive room 3 & 4, Lounge, Gents & Ladies toilet, Executive toilet). Ironmongery of approved make: a) S.S ball bering butt hinges 102mm x 76mm x 3mm - 4 Nos. b) SS mortise main door lock - 1 Nos. c) SS Tower Bolt 150mm long - 1 No. d) SS Door Stopper - 1 No. e) SS pull handle 900mm long - 1 pair
67
-
-
Providing and fixing factory made 35mm thick solid core flush shutters conforming to IS 2202 Part I, internally lipped, with exterior quality synthetic adhesive as manufactured by M/s Anchor or equivalent approved make. Further shutter shall be finished with approved laminate on both sides, shade and colour and design, edges of shutters shall be provided with 35mm x 6mm thick teakwood beading using exterior quality synthetic adhesive, headless GI nails, screws, beading finished with melamine polish, etc. (Beading Kiln seasoned, antitermite treated) including ironmongeries as per schedule and drawings all complete to entire satisfaction of the PM. D10 - Single leaf door shutter (Structural opening size - 750mm x 2975mm) (Location : Toilets). Ironmongery of approved make: a) S.S ball bering butt hinges 102mm x 76mm x 3mm - 3 Nos. b) SS mortise main door lock - 1 Nos. c) SS Door Hook d) SS Tower Bolt 150mm long - 1 No. e) SS Door Stopper - 1 No. f) SS Pull handle 700mm long - 1 pair
30
-
-
Providing and fixing factory made 35mm thick solid core flush shutters conforming to IS 2202 Part I, internally lipped, with exterior quality synthetic adhesive as manufactured by M/s Anchor or equivalent approved make. Further shutter shall be finished with approved laminate on both sides, shade and colour and design, edges of shutters shall be provided with 35mm x 6mm thick teakwood beading using exterior quality synthetic adhesive, headless GI nails, screws, beading finished with melamine polish, etc. (Beading Kiln seasoned, antitermite treated) including ironmongeries as per schedule and drawings all complete to entire satisfaction of the PM. D11 - Single leaf door shutter (Structural opening size - 600mm x 2975mm) (Location : Janitor). Ironmongery of approved make: a) S.S ball bering butt hinges 102mm x 76mm x 3mm - 3 Nos. b) SS mortise main door lock - 1 Nos. c) SS Door Hook d) SS Tower Bolt 150mm long - 1 No. e) SS Door Stopper - 1 No. f) SS Pull handle 700mm long - 1 pair
2
-
-
Providing and fixing factory made 35mm thick solid core flush shutters conforming to IS 2202 Part I, internally lipped, with exterior quality synthetic adhesive as manufactured by M/s Anchor or equivalent approved make. Further shutter shall be finished with approved laminate on both sides, shade and colour and design, edges of shutters shall be provided with 35mm x 6mm thick teakwood beading using exterior quality synthetic adhesive, headless GI nails, screws, beading finished with melamine polish, etc. (Beading Kiln seasoned, antitermite treated) including ironmongeries as per schedule and drawings all complete to entire satisfaction of the PM. D - Single leaf door shutter (Structural opening size - 900mm x 2800mm) (Location : Toilets). Ironmongery of approved make: a) S.S ball bering butt hinges 102mm x 76mm x 3mm - 3 Nos. b) SS mortise main door lock - 1 Nos. c) SS Door Hook d) SS Tower Bolt 150mm long - 1 No. e) SS Door Stopper - 1 No. f) SS Pull handle 700mm long - 1 pair
18
-
-
Providing and fixing factory made 35mm thick solid core flush shutters conforming to IS 2202 Part I, internally lipped, with exterior quality synthetic adhesive as manufactured by M/s Anchor or equivalent approved make. Further shutter shall be finished with approved laminate on both sides, shade and colour and design, edges of shutters shall be provided with 35mm x 6mm thick teakwood beading using exterior quality synthetic adhesive, headless GI nails, screws, beading finished with melamine polish, etc. (Beading Kiln seasoned, antitermite treated) including ironmongeries as per schedule and drawings all complete to entire satisfaction of the PM. D - Single leaf door shutter (Structural opening size - 750mm x 2100mm) (Location : Toilets). Ironmongery of approved make: a) S.S ball bering butt hinges 102mm x 76mm x 3mm - 3 Nos. b) SS mortise main door lock - 1 Nos. c) SS Door Hook d) SS Tower Bolt 150mm long - 1 No. e) SS Door Stopper - 1 No. f) SS Pull handle 700mm long - 1 pair
15
-
-
Providing and fixing factory made 35mm thick solid core flush shutters conforming to IS 2202 Part I, internally lipped, with exterior quality synthetic adhesive as manufactured by M/s Anchor or equivalent approved make. Further shutter shall be finished with approved laminate on both sides, shade and colour and design, edges of shutters shall be provided with 35mm x 6mm thick teakwood beading using exterior quality synthetic adhesive, headless GI nails, screws, beading finished with melamine polish, etc. (Beading Kiln seasoned, antitermite treated) including ironmongeries as per schedule and drawings all complete to entire satisfaction of the PM. D - Single leaf door shutter (Structural opening size - 750mm x 2100mm) (Location : Toilets). Ironmongery of approved make: a) S.S ball bering butt hinges 102mm x 76mm x 3mm - 3 Nos. b) SS mortise main door lock - 1 Nos. c) SS Door Hook d) SS Tower Bolt 150mm long - 1 No. e) SS Door Stopper - 1 No. f) SS Pull handle 700mm long - 1 pair
4
-
-
Providing and fixing factory made 35mm thick solid core flush shutters conforming to IS 2202 Part I, internally lipped, with exterior quality synthetic adhesive as manufactured by M/s Anchor or equivalent approved make. Further shutter shall be finished with approved laminate on both sides, shade and colour and design, edges of shutters shall be provided with 35mm x 6mm thick teakwood beading using exterior quality synthetic adhesive, headless GI nails, screws, beading finished with melamine polish, etc. (Beading Kiln seasoned, antitermite treated) including ironmongeries as per schedule and drawings all complete to entire satisfaction of the PM. But for finished with veneer. D - Single leaf door shutter (Structural opening size - 750mm x 2800mm). (Location : Toilets). Ironmongery of approved make: a) S.S ball bering butt hinges 102mm x 76mm x 3mm - 3 Nos. b) SS mortise main door lock - 1 Nos. c) SS Door Hook. d) SS Tower Bolt 150mm long - 1 No. e) SS Door Stopper - 1 No. f) SS Pull handle 700mm long - 1 pair
10
-
-
Providing and fixing factory made 35mm thick solid core flush shutters conforming to IS 2202 Part I, internally lipped, with exterior quality synthetic adhesive as manufactured by M/s Anchor or equivalent approved make. Further shutter shall be finished with approved laminate on both sides, shade and colour and design, edges of shutters shall be provided with 35mm x 6mm thick teakwood beading using exterior quality synthetic adhesive, headless GI nails, screws, beading finished with melamine polish, etc. (Beading Kiln seasoned, antitermite treated) including ironmongeries as per schedule and drawings all complete to entire satisfaction of the PM. But for finished with veneer. D1 - Single leaf door shutter (Structural opening size - 900mm x 2975mm) (Location : Archive room 3 & 4, Lounge, Gents & Ladies toilet, Executive toilet). Ironmongery of approved make: a) S.S ball bering butt hinges 102mm x 76mm x 3mm - 4 Nos. b) SS mortise main door lock - 1 Nos. c) SS Tower Bolt 150mm long - 1 No. d) SS Door Stopper - 1 No. e) SS pull handle 900mm long - 1 pair
94
-
-
Providing and fixing factory made 35mm thick solid core flush shutters conforming to IS 2202 Part I, internally lipped, with exterior quality synthetic adhesive as manufactured by M/s Anchor or equivalent approved make. Further shutter shall be finished with approved laminate on both sides, shade and colour and design, edges of shutters shall be provided with 35mm x 6mm thick teakwood beading using exterior quality synthetic adhesive, headless GI nails, screws, beading finished with melamine polish, etc. (Beading Kiln seasoned, antitermite treated) including ironmongeries as per schedule and drawings all complete to entire satisfaction of the PM. But for finished with veneer. D10 - Single leaf door shutter (Structural opening size - 750mm x 2975mm) (Location : Toilets). Ironmongery of approved make: a) S.S ball bering butt hinges 102mm x 76mm x 3mm - 3 Nos. b) SS mortise main door lock - 1 Nos. c) SS Door Hook. d) SS Tower Bolt 150mm long - 1 No. e) SS Door Stopper - 1 No. f) SS Pull handle 700mm long - 1 pair
20
-
-
Providing and fixing factory made 35mm thick solid core flush shutters conforming to IS 2202 Part I, internally lipped, with exterior quality synthetic adhesive as manufactured by M/s Anchor or equivalent approved make. Further shutter shall be finished with approved laminate on both sides, shade and colour and design, edges of shutters shall be provided with 35mm x 6mm thick teakwood beading using exterior quality synthetic adhesive, headless GI nails, screws, beading finished with melamine polish, etc. (Beading Kiln seasoned, antitermite treated) including ironmongeries as per schedule and drawings all complete to entire satisfaction of the PM. But for finished with veneer. D11 - Single leaf door shutter (Structural opening size - 600mm x 2975mm) (Location : Janitor). Ironmongery of approved make: a) S.S ball bering butt hinges 102mm x 76mm x 3mm - 3 Nos. b) SS mortise main door lock - 1 Nos. c) SS Door Hook. d) SS Tower Bolt 150mm long - 1 No. e) SS Door Stopper - 1 No. f) SS Pull handle 700mm long - 1 pair
2
-
-
Providing and fixing factory made 35mm thick solid core flush shutters conforming to IS 2202 Part I, internally lipped, with exterior quality synthetic adhesive as manufactured by M/s Anchor or equivalent approved make. Further shutter shall be finished with approved laminate on both sides, shade and colour and design, edges of shutters shall be provided with 35mm x 6mm thick teakwood beading using exterior quality synthetic adhesive, headless GI nails, screws, beading finished with melamine polish, etc. (Beading Kiln seasoned, antitermite treated) including ironmongeries as per schedule and drawings all complete to entire satisfaction of the PM. But for finished with veneer. D - Single leaf door shutter (Structural opening size - 1000mm x 2975mm) (Location : H.Toilet, Lounge). Ironmongery of approved make: a) S.S ball bering butt hinges 102mm x 76mm x 3mm - 3 Nos. b) SS mortise main door lock - 1 Nos. c) SS Door Hook. d) SS Tower Bolt 150mm long - 1 No. e) SS Door Stopper - 1 No. f) SS Pull handle 700mm long - 1 pair
54
-
-
Providing and fixing factory made 35mm thick solid core flush shutters conforming to IS 2202 Part I, internally lipped, with exterior quality synthetic adhesive as manufactured by M/s Anchor or equivalent approved make. Further shutter shall be finished with approved laminate on both sides, shade and colour and design, edges of shutters shall be provided with 35mm x 6mm thick teakwood beading using exterior quality synthetic adhesive, headless GI nails, screws, beading finished with melamine polish, etc. (Beading Kiln seasoned, antitermite treated) including ironmongeries as per schedule and drawings all complete to entire satisfaction of the PM. But for finished with veneer. D - Single leaf door shutter (Structural opening size - 1200mm x 2400mm) (Location : BMS room). Ironmongery of approved make: a) S.S ball bering butt hinges 102mm x 76mm x 3mm - 3 Nos. b) SS mortise main door lock - 1 Nos. c) SS Door Hook. d) SS Tower Bolt 150mm long - 1 No. e) SS Door Stopper - 1 No. f) SS Pull handle 700mm long - 1 pair
4
-
-
Providing and fixing factory made 35mm thick solid core flush shutters conforming to IS 2202 Part I, internally lipped, with exterior quality synthetic adhesive as manufactured by M/s Anchor or equivalent approved make. Further shutter shall be finished with approved laminate on both sides, shade and colour and design, edges of shutters shall be provided with 35mm x 6mm thick teakwood beading using exterior quality synthetic adhesive, headless GI nails, screws, beading finished with melamine polish, etc. (Beading Kiln seasoned, antitermite treated) including ironmongeries as per schedule and drawings all complete to entire satisfaction of the PM. But for 48mm thick door to be finished in laminate with hairline groove/joint and edge to have 300mm wide 12mm thick glass on edge inserted deep bt 50mm with araldite. D2 - Single leaf door shutter (Structural opening size - 1000mm x 2975mm). (Location : Cabin 1 to 12, ED/GM cabins, Meeting room 1 & 2, Lounge, Archive room 1 & 2). a) S.S ball bering butt hinges 102mm x 76mm x 3mm - 4 Nos. b) SS mortise main door lock - 1 Nos. c) SS Tower Bolt 150mm long - 1 No. d) SS Door Stopper - 1 No.
73
-
-
Providing and fixing factory made 35mm thick solid core flush shutters conforming to IS 2202 Part I, internally lipped, with exterior quality synthetic adhesive as manufactured by M/s Anchor or equivalent approved make. Further shutter shall be finished with approved laminate on both sides, shade and colour and design, edges of shutters shall be provided with 35mm x 6mm thick teakwood beading using exterior quality synthetic adhesive, headless GI nails, screws, beading finished with melamine polish, etc. (Beading Kiln seasoned, antitermite treated) including ironmongeries as per schedule and drawings all complete to entire satisfaction of the PM. But with 25mm x 25mm wood batten finished in veneer. D2a - Single leaf door shutter (Structural opening size - 1000mm x 2975mm) to be finished with 25mm x 25mm wood batten finished in Veneer / melamine. (Location : Meeting room, Director's cabin). Ironmongery of approved make: a) S.S ball bering butt hinges 102mm x 76mm x 3mm - 4 Nos. b) SS mortise main door lock - 1 Nos. c) SS Tower Bolt 150mm long - 1 No. d) SS Door Stopper - 1 No.
45
-
-
Providing and fixing factory made 35mm thick solid core flush shutters conforming to IS 2202 Part I, internally lipped, with exterior quality synthetic adhesive as manufactured by M/s Anchor or equivalent approved make. Further shutter shall be finished with approved laminate on both sides, shade and colour and design, edges of shutters shall be provided with 35mm x 6mm thick teakwood beading using exterior quality synthetic adhesive, headless GI nails, screws, beading finished with melamine polish, etc. (Beading Kiln seasoned, antitermite treated) including ironmongeries as per schedule and drawings all complete to entire satisfaction of the PM. But with 25mm x 25mm wood batten finished in veneer. D7 - Double leaf door shutter (Structural opening size - 1500mm x 2975mm) (Location : Board room, Auditorium). Ironmongery of approved make: a) S.S ball bering butt hinges 102mm x 76mm x 3mm - 8 Nos. b) SS mortise main door lock - 1 Nos. c) SS pull handle 900mm long - 2 pair. d) SS Tower Bolt 150mm long - 2 Nos. e) SS Door Stopper - 2 Nos.
10
-
-
Single Glazed Partition with 28 mm wide & 40 mm high top & bottom skirting in extruded aluminium duly powder coated/ annodized. The partition will be fitted with 10 mm thick clear toughened glass plate with polished edges. The linear joints between the glazed modules are provided with aluminium 'H' profiles sealed with high bonding double – side adhesive tape. The partition will be provided with ‘T’ profile and 2 – 3 ways extruded connections in aluminum and has a provision of connection to Dual Slab Partition. The system has an internal leveling mechanism allowing vertical adjustment of + / - 10 mm.
710
-
-
Single Glazed Partition with 28 mm wide & 40 mm high top & bottom skirting in extruded aluminium duly powder coated/ annodized. The partition will be fitted with 10 mm thick clear toughened glass plate with polished edges. The linear joints between the glazed modules are provided with aluminium 'H' profiles sealed with high bonding double – side adhesive tape. The partition will be provided with ‘T’ profile and 2 – 3 ways extruded connections in aluminum and has a provision of connection to Dual Slab Partition. The system has an internal leveling mechanism allowing vertical adjustment of + / - 10 mm. But with Vetrotech FR Glass of Saint-Gobain or equivalent as shown in the drawing.
22
-
-
Glass doors frames of 60 x 60 mm in extruded tubular aluminium duly powder coated/ annodized and 12 mm thick clear toughened glass door. The door will be provided with hinges, 450 mm H handle, exposed door closer and floor mounted door stopper all of Geze make. D3 - Single leaf door - Structural opening size - 1000mm x 2975mm (Location : Corridor, Reception, Lift Lobby)
32
-
-
Glass doors frames of 60 x 60 mm in extruded tubular aluminium duly powder coated/ annodized and 12 mm thick clear toughened glass door. The door will be provided with hinges, 450 mm H handle, exposed door closer and floor mounted door stopper all of Geze make. D6 - Single leaf door - Structural opening size - 1200mm x 2975mm (Location Lift Lobby)
8
-
-
Glass doors frames of 60 x 60 mm in extruded tubular aluminium duly powder coated/ annodized and 12 mm thick clear toughened glass door. The door will be provided with hinges, 450 mm H handle, exposed door closer and floor mounted door stopper all of Geze make. D6A - Single leaf door - Structural opening size - 1200mm x 2975mm (Location Lift Lobby)
20
-
-
Glass doors frames of 60 x 60 mm in extruded tubular aluminium duly powder coated/ annodized and 12 mm thick clear toughened glass door. The door will be provided with hinges, 450 mm H handle, exposed door closer and floor mounted door stopper all of Geze make. D8 - Double leaf door - Structural opening size - 1500mm x 2975mm (Location : Board room, Waiting Lounge, Lift Lobby, Cafeteria, Recreation area)
101
-
-
Glass doors frames of 60 x 60 mm in extruded tubular aluminium duly powder coated/ annodized and 12 mm thick clear toughened glass door. The door will be provided with hinges, 450 mm H handle, exposed door closer and floor mounted door stopper all of Geze make. D9 - Double leaf door - Structural opening size - 1800mm x 2975mm (Location : Lobby)
18
-
-
Glass doors frames of 60 x 60 mm in extruded tubular aluminium duly powder coated/ annodized and 12 mm thick clear toughened glass door. The door will be provided with hinges, 450 mm H handle, exposed door closer and floor mounted door stopper all of Geze make. D - Double leaf door - Structural opening size - 1670mm x 2700mm (Location : Lobby)
5
-
-
Double Glazed Partition with 100 mm wide and 50 mm high top and bottom skirting in extruded aluminium duly powder coated/ annodized. The partition will be fitted with 10 mm thick clear toughnened glass panel on both sides. The linear joints between the glazed modules will be provided with aluminium 'H' profiles sealed with high bonding double – side adhesive tape. The partition is provided with 2 – 3 ways extruded connections in aluminium for two and three way joints. The system has an internal leveling mechanism allowing vertical adjustment of + / - 10 mm.
1
-
-
Double Glazed Partition of fabric fused modular glass paritition with specs having approved fabric to have sandwiched glass with 28 mm wide & 40 mm high top & bottom skirting in extruded aluminium duly powder coated/ annodized. The partition will be fitted with 10 mm thick clear toughened glass plate with polished edges. The linear joints between the glazed modules are provided with aluminium 'H' profiles sealed with high bonding double – side adhesive tape. The partition will be provided with ‘T’ profile and 2 – 3 ways extruded connections in aluminum and has a provision of connection to Dual Slab Partition. The system has an internal leveling mechanism allowing vertical adjustment of + / - 10 mm.
1
-
-
Providing and fixing in place glass graphic film of 3M (or equivalent approved) on glass in approved pattern, shade etc. complete as per PM's instructions.
206
-
-
Providing, constructing and fixing in place overhead storage units to be constructed as follows : a) Shutter shall be made out of 19mm thick approved marine grade ply and finished with approved veneer and satin melamine polish/polycoat lamination on both sides. b) Overhead storage unit box shall be made out of 19mm thick approved marine ply and finished with approved veneer and satin melamine polish/polycoat inside storage with veneer and melamine polish and ouside in veneer in lamination finish. c) Shelf shall be made out of 19mm thick approved marine grade ply & finished with veneer and satin melamine polish/polycoat lamination on both sides. d) Cost also to include approved quality hard wood (kiln seasoned, antitermite treated) edges, framing and lipping patti including melamine/polycoat lamination finish as per drawing and as per PM 's directions. e) Cost to include providing & fixing SS hinges, Godrej multi purpose SS locks, SS handles / knob, synthetic resin adhesive etc. complete wherever required. All complete as shown in drawings and entire satisfaction of the PM. (Location: Pantry)
14
-
-
Providing and fixing 19mm thick approved marine garde ply door shutters and shelves (below platform) with approved quality hard wood frame all finished with veneer and high gloss poly coated lamination; timber to be kiln seasoned, antitermite treated, painted with one coat of hot bitumen for faces in contact with masonry, exposed face melamine polished. Shutters comprising of veneer on both sides bounded at factory to 19 mm thick marine ply with exterior quality phenolic bonded adhesive. Edges beaded with kiln seasoned antitermite treated teak wood beading 18 x 6 mm and finished with high gloss poly coated lamination. Also to include drawers fixed with SS channels, shutters to have SS snap-on type hinges with matching screws, Knob type handle – 1No. per shutter, SS Magnet catches etc. as per the sample approved, all complete as shown in the drawing and to the entire satisfaction of the PM. (Location: Pantry)
18
-
-
Painting Works
-
-
-
Providing and applying Emulsion paint of approved make and colour conforming to IS in two coats (surface and finish acceptable to the PM must be achieved by the contractor and any additional coats if required shall be at the cost of the contractor); including preparing surfaces, filling up with gypsum or approved crack filler, binder; cleaning and making the surface dust-free, applying a sealer or primer coat of paint as recommended by approved paint manufacturer, applying two coats of paint (of approved make and shade), required scaffolding, cleaning and protecting till the handing over of site to the employer all complete to entire satisfaction of the PM.
2269
-
-
Providing and applying Textured paint of approved equivalent make to surfaces in three coats paint (1 coat by trowel and 2 coats by brush/roller; surface and finish acceptable to the PM must be achieved by the contractor and any additional coats if required shall be at the cost of the contractor) as per manufacturers specification and technical manual including required cleaning of the surfaces, curing, required scaffolding / staging / temporary hoisting etc. complete to the entire satisfaction of the PM.
371
-
-
Providing and applying Textured paint of approved equivalent make to surfaces in three coats paint (1 coat by trowel and 2 coats by brush/roller; surface and finish acceptable to the PM must be achieved by the contractor and any additional coats if required shall be at the cost of the contractor) as per manufacturers specification and technical manual including required cleaning of the surfaces, curing, required scaffolding / staging / temporary hoisting etc. complete to the entire satisfaction of the PM. But for Textured paint with 6mm x 6mm Groove.
128
-
-
Providing and applying White Polycoat paint of approved make and colour conforming to IS in two coats (surface and finish acceptable to the PM must be achieved by the contractor and any additional coats if required shall be at the cost of the contractor); including preparing surfaces, filling up with gypsum or approved crack filler, binder; cleaning and making the surface dust-free, applying a sealer or primer coat of paint as recommended by approved paint manufacturer, applying two coats of paint (of approved make and shade), required scaffolding, cleaning and protecting till the handing over of site to the employer all complete to entire satisfaction of the PM.
152
-
-
Providing and applying two under coats and one finish coat of Duco paint of approved colour over approved priming coat on existing ply wood paneling conforming to IS (surface and finish acceptable to the PM must be achieved by the Contractor and any additional coats if required shall be at the cost of the Contractor) including preparing surfaces, required scaffolding etc. all complete at all leads and lifts to entire satisfaction of the PM.
92
-
-
Built-in Furniture Works
-
-
-
Providing, constructing and fixing in place Storage Unit shutter to be constructed with 38mm thick with 25mm thick aluminium framing covered in 6mm thick External grade MDF, shutters to be finished with laminate on both sides including internal verticles, shelves, drawers as directed by the PM also including necessary fitting / fixtures and hardware etc. complete to the entire satisfaction of the PM. (Location : Cafeteria)
8
-
-
Providing, constructing and fixing in place Storage Unit to be constructed with 19mm thick marine, shutters to be finished with veneer and satin melamine polish inside and polycoated lamination outside including internal verticles, shelves, drawers as directed by the PM also including necessary fitting / fixtures and hardware etc. complete to the entire satisfaction of the PM. (Location: Printing area)
8
-
-
Providing, constructing and fixing in place Full height Storage Unit to be constructed with 19mm thick marine, shutters to be finished with veneer and satin melamine polish inside and polycoated lamination outside including internal verticles, shelves, drawers as directed by the PM also including necessary fitting / fixtures and hardware etc. complete to the entire satisfaction of the PM. Size : 2900mm x 475mm x 2875mm
9
-
-
Providing, constructing and fixing in place Full height Storage Unit to be constructed with 19mm thick marine, shutters to be finished with veneer and satin melamine polish inside and polycoated lamination outside including internal verticles, shelves, drawers as directed by the PM also including necessary fitting / fixtures and hardware etc. complete to the entire satisfaction of the PM. Size : 3000mm x 400mm x 2875mm
28
-
-
Providing, constructing and fixing in place Full height Storage Unit to be constructed with 19mm thick marine, shutters to be finished with veneer and satin melamine polish inside and polycoated lamination outside including internal verticles, shelves, drawers as directed by the PM also including necessary fitting / fixtures and hardware etc. complete to the entire satisfaction of the PM. Size : 1500mm x 400mm x 2875mm
5
-
-
Providing, constructing and fixing in place Full height Storage Unit to be constructed with 19mm thick marine, shutters to be finished with veneer and satin melamine polish inside and polycoated lamination outside including internal verticles, shelves, drawers as directed by the PM also including necessary fitting / fixtures and hardware etc. complete to the entire satisfaction of the PM. Size : 2575mm x 450mm x 2875mm
8
-
-
Providing, constructing and fixing in place Full height Storage Unit to be constructed with 19mm thick marine, shutters to be finished with veneer and satin melamine polish inside and polycoated lamination outside including internal verticles, shelves, drawers as directed by the PM also including necessary fitting / fixtures and hardware etc. complete to the entire satisfaction of the PM. Size : 4945mm x 350mm x 2875mm
15
-
-
Providing, supplying & fixing in place Compactor of Kompress or equivelent filing system as specified below.:- (as shown in the drawing / image). BASE FRAME : Base frame shall be fabricated in channel type from 3.00 mm thick MS sheet size of channel 25mm x 100mm x 45 mm. GUIDE RAILS. The Guide rails shall be made out of 30mm bright bar placed within `C' channel size of 36mm x 24mm x 24mm x 3.mm thk. which will be embedded in the floor. The bright bar shall be 6mm to 8mm above floor level and including breaking the existing floor. SUPER STRUCTURE: Super structure of the mobile storage system should be essentially collapsible or knock down type. Each component of the compactor such as shelves, front panel, end panel, vertical rear panel, centre paritition etc. should act as an integral member of the unit as a whole (No slotted angle will be used). SHELVES: Boltless type shelves shall be made of 20 SWG thk. C.R.C.A. quality steel having 8 folds each designed to carry a U.D.L. of 50 Kgs. VERTICAL PANEL: Vertical panel consists of the front, centre & rear panel shall be made out of 20 SWG mm designed C.R.C.A. prime quality steel and designed to take the load of shelves on clip arrangement (for boltless shelving). DRIVE COVER PANEL: Made out of 20SWG thk. C.R.C.A. prime quality steel and of Box type to cover the entire drive mechanism completely as per drawing. CENTRE PARTITION The centre partition shall comprise of a full C.R.C.A. prime quality 20 G sheet and no vertical M.S. strips shall be used as centre partition. DRIVE MECHANISM: Drive mechanaism shall be provided externally supported on special grade anti-friction bearing to have smooth and effortless movement. Entire mechnaism or gear and sprockets shall be incorporated within the front panel provided in the front of the unit Each compactor should have 4 nos. of cast iron wheels of size: 128 x 35mm. Each wheel should be provided with a pair of self aligned heavy duty pedestal type bearings. The drive mechanism shall comprise of sprockets chain type arrangement. The chain used shall be 12mm traction chain of `Diamond' or `rollon' make. The drive wheel should be of Polyurethene foam moulded, light weight, firm grip type, dynamically balanced provided with needle roller bearing for smooth drive and fitted at convenient height for operation. The drive mechanism shall only be provided on the external front side of the compactor systems i.e. effective storage area inside the compactor shall not be disturbed. The entire drive mechanism shall be concealed from all sides from the safety point of view. CENTRAL LOCKING: System shall be provided with centralised locking arrangement on the last unit when all the units are brought together, central lock when operated gets locked with the floor and does not allow access to the units. INDEXING ARRANGEMENT: 2 Nos.of Acrylic indexes (250 x 150 x 2.5 mm thk.) shall be provided on each front panel of the comapctor unit for easy identification and retreival. DRIVING WHEEL: Driving wheel shall be provided with Polyurethene foam moulded (stearing) wheel which will give required Torque to whole system for free movement on guide rail. ANTI RUST TREATMENT: All the items shall be supplied duly painted with stoving enamel paint in the manufacturers work shop. Paint marks during the transportation shall be touched up at site to match the surface. All components shall be given 4 stage, 7 steps anti corrosive treatment. FINISH: After applying anti treatment the final finish shall be provided with stoving enamel paint (oven baked) of approved colour for better outlook. Compactor Racks (2920mm L x 2525mm W x 2775mm H)
16
-
-
Providing, supplying & fixing in place Compactor of Kompress or equivelent filing system as specified below.:- (as shown in the drawing / image). BASE FRAME : Base frame shall be fabricated in channel type from 3.00 mm thick MS sheet size of channel 25mm x 100mm x 45 mm. GUIDE RAILS. The Guide rails shall be made out of 30mm bright bar placed within `C' channel size of 36mm x 24mm x 24mm x 3.mm thk. which will be embedded in the floor. The bright bar shall be 6mm to 8mm above floor level and including breaking the existing floor. SUPER STRUCTURE: Super structure of the mobile storage system should be essentially collapsible or knock down type. Each component of the compactor such as shelves, front panel, end panel, vertical rear panel, centre paritition etc. should act as an integral member of the unit as a whole (No slotted angle will be used). SHELVES: Boltless type shelves shall be made of 20 SWG thk. C.R.C.A. quality steel having 8 folds each designed to carry a U.D.L. of 50 Kgs. VERTICAL PANEL: Vertical panel consists of the front, centre & rear panel shall be made out of 20 SWG mm designed C.R.C.A. prime quality steel and designed to take the load of shelves on clip arrangement (for boltless shelving). DRIVE COVER PANEL: Made out of 20SWG thk. C.R.C.A. prime quality steel and of Box type to cover the entire drive mechanism completely as per drawing. CENTRE PARTITION The centre partition shall comprise of a full C.R.C.A. prime quality 20 G sheet and no vertical M.S. strips shall be used as centre partition. DRIVE MECHANISM: Drive mechanaism shall be provided externally supported on special grade anti-friction bearing to have smooth and effortless movement. Entire mechnaism or gear and sprockets shall be incorporated within the front panel provided in the front of the unit Each compactor should have 4 nos. of cast iron wheels of size: 128 x 35mm. Each wheel should be provided with a pair of self aligned heavy duty pedestal type bearings. The drive mechanism shall comprise of sprockets chain type arrangement. The chain used shall be 12mm traction chain of `Diamond' or `rollon' make. The drive wheel should be of Polyurethene foam moulded, light weight, firm grip type, dynamically balanced provided with needle roller bearing for smooth drive and fitted at convenient height for operation. The drive mechanism shall only be provided on the external front side of the compactor systems i.e. effective storage area inside the compactor shall not be disturbed. The entire drive mechanism shall be concealed from all sides from the safety point of view. CENTRAL LOCKING: System shall be provided with centralised locking arrangement on the last unit when all the units are brought together, central lock when operated gets locked with the floor and does not allow access to the units. INDEXING ARRANGEMENT: 2 Nos.of Acrylic indexes (250 x 150 x 2.5 mm thk.) shall be provided on each front panel of the comapctor unit for easy identification and retreival. DRIVING WHEEL: Driving wheel shall be provided with Polyurethene foam moulded (stearing) wheel which will give required Torque to whole system for free movement on guide rail. ANTI RUST TREATMENT: All the items shall be supplied duly painted with stoving enamel paint in the manufacturers work shop. Paint marks during the transportation shall be touched up at site to match the surface. All components shall be given 4 stage, 7 steps anti corrosive treatment. FINISH: After applying anti treatment the final finish shall be provided with stoving enamel paint (oven baked) of approved colour for better outlook. Compactor Racks (4950mm L x 1900mm W x 2775mm H)
30
-
-
Slotted angle racks.
38
-
-
Providing, constructing and placing in position Console table of size (2400mm L x 400mm W x 750mm H). a) Table top made out of Corian finish with center band in Mirror. b) Front face of base of table to be finished in veneer with Aluminium profile handle as shown in drawing. Cost to include providing and fixing approved teak wood beading with polycoat finish, chamfering, rounding edges, hardware (i.e. handle, hinges, lock, etc.), making cut-outs in tables wherever required as shown in the drawings or as per PM's directions. All complete as shown in drawings and entire satisfaction of the PM. Top area in plan shall be measured for payment purpose.
4
-
-
Providing, constructing and placing in position Console table of size (2000mm L x 450mm W x 750mm H). a) Table top made out of Corian finish with center band in Mirror. b) Front face of base of table to be finished in 50mm thick dubbed Mirror as shown in drawing. Cost to include providing and fixing approved teak wood beading with polycoat finish, chamfering, rounding edges, hardware (i.e. handle, hinges, lock, etc.), making cut-outs in tables wherever required as shown in the drawings or as per PM's directions. All complete as shown in drawings and entire satisfaction of the PM. Top area in plan shall be measured for payment purpose.
5
-
-
Providing, constructing and placing in position Console table of size (1200mm L x 350mm W x 750mm H). a) Table top made out of Corian finish with center band in Mirror. Cost to include providing and fixing approved teak wood beading with polycoat finish, chamfering, rounding edges, hardware (i.e. handle, hinges, lock, etc.), making cut-outs in tables wherever required as shown in the drawings or as per PM's directions. All complete as shown in drawings and entire satisfaction of the PM. Top area in plan shall be measured for payment purpose.
1
-
-
Providing, constructing and placing in position Console table of size (3830mm L x 600mm W x 1150mm H). a) Table top made out of Corian finish with center band in Mirror. b) Front face of base of table to be finished in 50mm thick dubbed Mirror and Crema noce marble as shown in drawing. Cost to include providing and fixing approved teak wood beading with polycoat finish, chamfering, rounding edges, hardware (i.e. handle, hinges, lock, etc.), making cut-outs in tables wherever required as shown in the drawings or as per PM's directions. All complete as shown in drawings and entire satisfaction of the PM. Top area in plan shall be measured for payment purpose.
2
-
-
Providing, constructing and placing in position Console table of size (3000mm L x 600mm W x 1150mm H). a) Table top made out of Corian finish with center band in Mirror. b) Front face of base of table to be finished in veneer as shown in drawing. Cost to include providing and fixing approved teak wood beading with polycoat finish, chamfering, rounding edges, hardware (i.e. handle, hinges, lock, etc.), making cut-outs in tables wherever required as shown in the drawings or as per PM's directions. All complete as shown in drawings and entire satisfaction of the PM. Top area in plan shall be measured for payment purpose.
2
-
-
Console to be finished in Crema noce marble (800mm L x 400mm W x 800mm H)
2
-
-
Providing, constructing and placing in position Board Room Table of size 10500mm x 1800mm x 750mm made out of : a) Table top made out of 19mm thick marine grade Plywood in two layers with approved burl veneer and polycoat finish from both sides. Further 150mm wide band of venner/Melamine finished as per detail drawing. b) Table top also provided with approved Marble of size 6290mm x 600mm with Artificial plant arrangement. c) Table Side central portion shall be finished with Veneer/Polycoat and Side Edge portion shall be finished with burl veneer and polycoat as per detail drawing. Cost to include providing and fixing approved teak wood beading with polycoat finish, chamfering, rounding edges, hardware (i.e. handle, hinges, lock, etc.), making cut-outs in tables wherever required as shown in the drawings or as per PM's directions. All complete as shown in drawings and entire satisfaction of the PM. Top area in plan shall be measured for payment purpose. (Location: Board Room)
1
-
-
Providing, constructing and placing in position Board Room and Meeting room Table of size 6500mm x 2180mm x 750mm made out of : a) Table top made out of 19mm thick marine grade Plywood in two layers with approved burl veneer and polycoat finish with 25mm wood inlay and Artificial plant arrangement. . Further 250mm wide band of venner/Polycoat and 150mm wide band of venner/Melamine finished as per detail drawing. b) Table Side upper portion in curved profile shall be finished with Veneer/Polycoat and bottom portion in curved profile shall be finished with burl veneer and polycoat as per detail drawing. Cost to include providing and fixing approved teak wood beading with polycoat finish, chamfering, rounding edges, hardware (i.e. handle, hinges, lock, etc.), making cut-outs in tables wherever required as shown in the drawings or as per PM's directions. All complete as shown in drawings and entire satisfaction of the PM. Top area in plan shall be measured for payment purpose. (Location: Board Room, Meeting room)
3
-
-
Providing, constructing and placing in position L-shape Table of size ((2400mm x 1050mm)+(1500mm x 600mm)) x 750mm made out of : a) Table top made out of 19mm thick marine grade Plywood in two layers with approved Venner/polycoat finish with Leather top size (1000mm x 450mm) as per detail drawing. b) Front face of table to be finished in Burl venner and Polycoat finished as shown in drawing. c) Shutters and drawers shall be made out of 19mm thick approved marine grade ply and finished with approved veneer/polycoat on both sides. Cost to include providing and fixing approved teak wood beading with polycoat finish, chamfering, rounding edges, hardware (i.e. handle, hinges, lock, etc.), making cut-outs in tables wherever required as shown in the drawings or as per PM's directions. All complete as shown in drawings and entire satisfaction of the PM. Top area in plan shall be measured for payment purpose.
12
-
-
Providing, constructing and placing in position L-shape Table of size ((1500mm x 600mm)+(900mm x 450mm)) x 750mm made out of : a) Table top made out of 19mm thick marine grade Plywood in two layers with approved Venner/polycoat finish with Leather top size (1000mm x 450mm) as per detail drawing. b) Front face of table to be finished in Burl venner and Polycoat finished as shown in drawing. c) Shutters and drawers shall be made out of 19mm thick approved marine grade ply and finished with approved veneer/polycoat on both sides. Cost to include providing and fixing approved teak wood beading with polycoat finish, chamfering, rounding edges, hardware (i.e. handle, hinges, lock, etc.), making cut-outs in tables wherever required as shown in the drawings or as per PM's directions. All complete as shown in drawings and entire satisfaction of the PM. Top area in plan shall be measured for payment purpose.
6
-
-
Providing, constructing and placing in position L-shape Table of size ((1800mm x 750mm)+(950mm x 400mm)) x 750mm made out of : a) Table top made out of 19mm thick marine grade Plywood in two layers with approved Venner/polycoat finish with Leather top size (1000mm x 450mm) as per detail drawing. b) Front face of table to be finished in Burl venner and Polycoat finished as shown in drawing. c) Shutters and drawers shall be made out of 19mm thick approved marine grade ply and finished with approved veneer/polycoat on both sides. Cost to include providing and fixing approved teak wood beading with polycoat finish, chamfering, rounding edges, hardware (i.e. handle, hinges, lock, etc.), making cut-outs in tables wherever required as shown in the drawings or as per PM's directions. All complete as shown in drawings and entire satisfaction of the PM. Top area in plan shall be measured for payment purpose.
18
-
-
Providing, constructing and placing in position Semi circular Reception Table of size 1800mm x 800mm x 750mm made out of : a) Table top made out of 12mm thick Laquered Glass. b) Sides & front of table shall be made out of 30mm thick Corian with 18mm x 12mm deep flute design in corian in curved form and 25mm thick Polish S.S. strip as shown in drawing. Cost to include providing and fixing approved teak wood beading with polycoat finish, chamfering, rounding edges, hardware (i.e. handle, hinges, lock, etc.), making cut-outs in tables wherever required as shown in the drawings or as per PM's directions. All complete as shown in drawings and entire satisfaction of the PM. Top area in plan shall be measured for payment purpose. (Location: Reception 2nd Floor)
1
-
-
Providing, constructing and placing in position Reception Table of size 2450mm x 850mm x 1050mm made out of : a) Table top made out of Veneer/Polycoat finish. b) Sides & front of table shall be made out of Beige travertino marble & 25mm thick Polish S.S. strip as shown in drawing. c) Drawers to be finished in veneer/polycoat and to have profile handle below the table top. Cost to include providing and fixing approved teak wood beading with polycoat finish, chamfering, rounding edges, hardware (i.e. handle, hinges, lock, etc.), making cut-outs in tables wherever required as shown in the drawings or as per PM's directions. All complete as shown in drawings and entire satisfaction of the PM. Top area in plan shall be measured for payment purpose. (Location: Reception 8th Floor)
1
-
-
Providing, constructing and placing in position Eliptical Reception Table of size 2400mm x 850mm x 1050mm made out of : a) Table top made out of Veneer/Polycoat finish. b) Sides & front of table shall be made out of veneer/polycoat & Polish S.S. strip as shown in drawing. c) Drawers to be finished in veneer/melamine below the table top. Cost to include providing and fixing approved teak wood beading with polycoat finish, chamfering, rounding edges, hardware (i.e. handle, hinges, lock, etc.), making cut-outs in tables wherever required as shown in the drawings or as per PM's directions. All complete as shown in drawings and entire satisfaction of the PM. Top area in plan shall be measured for payment purpose. (Location: Reception 9th Floor)
1
-
-
Providing, constructing and placing in position Modular Doctors room L- shape table of size (1500mm x 600mm) + (900mm x 450mm) made out of :
1
-
-
Providing, constructing and placing in position Doctor's examination bed 1803C - Health check examination couch from JANAK (MIDMARK). a) Overall approximate dimension : 1895mm x 560mm x 830mm with BP tray : 945mm. b) Mattress platform size : 1895mm x 560mm x 64mm. c) Upper section of box size : 1216mm x 460mm x 630mm. d) Three cabinet size : 352mm x 435mm x 435mm. e) B.P. tray size : 127mm x 365mm x 20mm. f) Fixed upholstered top in two pieces of 560mm. g) Headrest adjustable on gas spring. h) Upper section of box with drawers. i) Lower section comprises of three cabinets with separate doors and lock on two side doors. j) B.P. apparatus tray provided near headrest. k) Inbuilt sliding step stool. l) Pre-treated and power coated. m) Supplied in Semi Knocked Down condition (SKD). n) Safe working load of 170kgs and patient load bearing capacity of 135 kgs.
1
-
-
Providing and fixing in place library rack of width 1800mmx450mm deep and height 1950mm to be constructed in 18mmthk MDF. All sides to be double layered to achieve 38mm thk with back in 12mm thk MDF, rack to be finished in veneer with equal shelves in 12mmthk clear glass inserted within the grooove. Bottom of the unit to have storage finished in veneer, with shutter in 18mm thk MDF, veneer finished with profile handle and complete hardware.
6
-
-
Providing and constructing in place Main atrium reception table as per dimension (1500mm L x 750mm W x 1000mm H) at 2 levels to be constructed in MDF to be finished in combination of white and veneer polycoat with front apron to be finished in MOP inlay as per detail, bottom base to have 25mm high s.s plate. For table detail refer detail drawing.
1
-
-
Providing and constructing in place Main atrium reception table as per dimension (1800mm L x 675mm W x 950mm H) at 2 levels to be finished in corian as per detail drawing.
1
-
-
2740mm x 950mm x 300mm ht. pedestal to be made with AAC blocks and to be finished in Brown armani marble (Plan area to be measured for payment). 'Pedestal : Providing and constructing AAC concrete block masonry pedestals (Siporex or equivalent approved) in cement mortar in ratio 1:4 (1 cement : 4 sand) with 12mm thick cement mortar of 1:4 (1 cement : 4 sand) plaster with all lead, lifts and depths, curing and etc. complete to the approval of the PM. 'Finish : Providing and fixing/laying approved machine cut, machine polished 19-20mm thick Brown Armani Marble clading to pedestal on horizontal and vertical surfaces, as shown in drawing or as directed by the PM. Stone fixed with approved compatible adhesive complying with class C2TE OF BS EN 12002 and BS EN 12004 over plastered surface to correct line, level and plumb. Joints are well cleaned and grouted with matching colour polymer based approved quality polymer based readymade grout and cured, cleaned, junctions with plaster finished smooth, etc. all complete at all heights and leads to the satisfaction of the PM.
10
-
-
Pedestal in MDF to be cladded in White Statutario marble of size (400mm x 400mm x 1050mm). (Location : Board room). 'Providing, constructing & fixing approved paneling using 12mm thick MDF boards of approved make and confirming to IS 3087; fixed on Aluminum framing as shown in drawing. Aluminium framing to be fixed and anchored to slabs at bottom and at top to beams using SS anchor fasteners. Pattern of paneling to be as indicated in drawings with extra pattas of plywood of required thickness to be provided so as to produce dubbed / raised panel as required.Paneling to be ready to receive finishing in veneer / laminate, as indicated. Grooves to be provided at junction of skirting & flooring to enable carpets to slide in. 'Cladding : Providing and fixing approved machine cut, machine polished 19-20mm thick White Statutario Marble clading to pedestal, as shown in drawing or as directed by the PM. Stone fixed with approved compatible adhesive complying with class C2TE OF BS EN 12002 and BS EN 12004over plastered surface to correct line, level and plumb. Joints are well cleaned and grouted with matching colour polymer based approved quality polymer based readymade grout and cured, cleaned, junctions with plaster finished smooth, etc. all complete at all heights and leads to the satisfaction of the PM.
5
-
-
Providing and fixing 50mm thick Running desk with drawers with SS sliding channels, 2 pedestals with required frame work made out of approved quality Marine ply (Confirming to IS 1976), chemically treated, kiln-seasoned, anti-termite treated, shaped, grooved and finished with approved laminate and melamine polished of approved make, shade and colour and design etc. as shown in drawing and to the entire satisfaction of PM. 600mm wide Running Desk
2.5
-
-
Providing and fixing 50mm thick Running desk with drawers with SS sliding channels, 2 pedestals with required frame work made out of approved quality Marine ply (Confirming to IS 1976), chemically treated, kiln-seasoned, anti-termite treated, shaped, grooved and finished with approved laminate and melamine polished of approved make, shade and colour and design etc. as shown in drawing and to the entire satisfaction of PM. 1000mm wide Running Desk
2.5
-
-
Modular Furniture Works
-
-
-
L Shape Workstations of size 1500(W)mm + 1500mm(L) x 600mm (D) x 1150mm (H). Type : Desk based system. Table top : 25mm thick prelaminated table top with Aluminum Flipup provision. Size: 500mm(W)x120mm(d) in Anodized finish only. Main spine - 30mm thick : Above table top:- Inside half Magnetic board-half glass marker and out side fabric hard board size of 1500Wx400H. Return spine - 30mm thick - Not connecting to Main spine.. : Above table top:- Inside Magnetic board and out side fabric hard board size of 1350Wx400H. Understructure : End Legs : MS Powder coated SOLE Slant legs and Mid legs: MS Powder caoted metal mid legs with metal beams cosnsidered for table support. Wire management : MS Powder coated full length wire tray & vertical cable risers considerd for wire management. Below table top - Modesty : 350H - Sharing WS 450H - Non sharing WS, MS Powder coated perforated metal modesty @ Below table top main spine & Return spine. Leg - Modesty : 450H - MS Powder coated perforated metal Leg modesty for All legs.
62
-
-
PLB Mobile Pedestal - 2D+1F. 2 Pencil drawers + 1 filing drawer. Size :400mm(W) x 450mm(D) x 650mm(H) with central locking system & Aluminum D ypte / Depress handles.
62
-
-
Secy Table 1 (8th and 9th floor) of Front Table size: 1500mm (W) x 600mm(D) x 750mm (H). Type : Loose Furniture. Table top : 25mm thick prelaminated table top with Aluminum Flipup provision. Size: 500mm(W)x120mm(d). Table Understructure : End Legs : MS Powder coated Straight SOLE legs and Mid legs: MS Powder caoted metal mid legs with metal beams cosnsidered for table support. Modesty: 450mm(H), MS Powder coated metal modesy considered. Wire management : MS-Powder coated wire tray with snakeguard considerd for cable management. (Inclusive of PLPB 3dr Unit ) : 2 Pencil drawers + 1 filing drawer. Size :400mm(W) x 450mm(D) x 750mm(H) with central locking system & Aluminum D type handles.
14
-
-
Side Storage - (Inclusive of 3dr unit) of Side Storge size: 900mm (W) x 450mm(D) x 750mm (H) (400W - 3dr Unit & 500W - Openable shutters). Top - Made of 25mm thick PLPB . Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys.
14
-
-
Back Storage - Openable shutters of Back Storge size: 1500 mm (W) x 450mm(D) x 750mm (H) (1350W - Openable shutters with 450mm extended top). Top - Made of 25mm thick PLPB . Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys.
14
-
-
Cabin Table 2 of Front Table size: 1800mm (W) x 750mm(D) x 750mm (H). Type : Loose Furniture. Table top : 25mm thick prelaminated table top with Aluminum Flipup provision. Size: 500mm(W)x120mm(d). Table Understructure : End Legs : MS Powder coated Straight SOLE legs and Mid legs: MS Powder caoted metal mid legs with metal beams cosnsidered for table support. Modesty: 450mm(H), MS Powder coated metal modesy considered. Wire management : MS-Powder coated wire tray with snakeguard considerd for cable management. (Inclusive of PLPB 3dr Unit ) : 2 Pencil drawers + 1 filing drawer. Size :400mm(W) x 450mm(D) x 750mm(H) with central locking system & Aluminum D type handles.
12
-
-
Side Storage - (Inclusive of 3dr unit) of Side Storge size: 900mm (W) x 450mm(D) x 750mm (H) (400W - 3dr Unit & 500W - Openable shutters). Top - Made of 25mm thick PLPB . Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys.
12
-
-
Back Storage - Openable shutters of Back Storge size: 1800 mm (W) x 450mm(D) x 750mm (H) (1350W - Openable shutters with 450mm extended top). Top - Made of 25mm thick PLPB . Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys.
12
-
-
Cabin Table 2 ( ED/GM ) and 2 on the 9th floor of Front Table size: 2100mm (W) x 900mm(D) x 750mm (H). Type : Loose Furniture. Table top : 25mm thick prelaminated table top with Aluminum Flipup provision. Size: 500mm(W)x120mm(d). Table Understructure : End Legs : MS Powder coated Straight SOLE legs and Mid legs: MS Powder caoted metal mid legs with metal beams cosnsidered for table support. Modesty: 450mm(H), MS Powder coated metal modesy considered. Wire management : MS-Powder coated wire tray with snakeguard considerd for cable management. (Inclusive of PLPB 3dr Unit ) : 2 Pencil drawers + 1 filing drawer. Size :400mm(W) x 450mm(D) x 750mm(H) with central locking system & Aluminum D type handles.
8
-
-
Side Storage - (Inclusive of 3dr unit) of Side Storge size: 1200mm (W) x 450mm(D) x 750mm (H) (400W - 3dr Unit & 800W - Openable shutters). Top - Made of 25mm thick PLPB . Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys.
8
-
-
Back Storage - Openable shutters of Back Storge size: 2100 mm (W) x 450mm(D) x 750mm (H) (1350W - Openable shutters with 450mm extended top). Top - Made of 25mm thick PLPB . Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys.
8
-
-
Cubical table of Front Table size: 1800mm (W) x 750mm(D) x 750mm (H). Type : Loose Furniture. Table top : 25mm thick prelaminated table top with Aluminum Flipup provision. Size: 500mm(W)x120mm(d). Table Understructure : End Legs : MS Powder coated Straight SOLE legs and Mid legs: MS Powder caoted metal mid legs with metal beams cosnsidered for table support. Modesty: 450mm(H), MS Powder coated metal modesy considered. Wire management : MS-Powder coated wire tray with snakeguard considerd for cable management. (Inclusive of PLPB 3dr Unit ) : 2 Pencil drawers + 1 filing drawer. Size :400mm(W) x 450mm(D) x 750mm(H) with central locking system & Aluminum D type handles.
6
-
-
Side Storage - (Inclusive of 3dr unit) of Side Storge size: 1200mm (W) x 450mm(D) x 750mm (H) (400W - 3dr Unit & 800W - Openable shutters). Top - Made of 25mm thick PLPB . Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles
6
-
-
Meeting Table 1 of size 2700mm (W) x 1050mm(D) x 750mm (H) with Two No's of Aluminum flipup considered. Type : Loose Furniture. Table top : 25mm thick prelaminated table top with matching edgebanding. Understructure : End Legs: Progue Series considered and Mid legs: 50mm x 50mm MS-Powder coated Legs & MS-Powder coated Progue beams are considered for supporting table top. Wire management : MS-Powder coated wire tray with PVC Snake guard/ Vertical duct considerd for cable management
2
-
-
Board Table of size 10000mm (W) x 1500mm(D) x 750mm (H) with Five No's of Aluminum flipup considered. Type : Loose Furniture. Table top : 25mm thick prelaminated table top with matching edgebanding. Understructure : End Legs: Progue Series considered and Mid legs: 50mm x 50mm MS-Powder coated Legs & MS-Powder coated Progue beams are considered for supporting table top. Wire management : MS-Powder coated wire tray with PVC Snake guard/ Vertical duct considerd for cable management
1
-
-
Café table on 3rd floor of size 1050mm(Dia) x 750mm (H). Type : Loose Furniture. Table top : 25mm thick E1 Grade prelaminated table top with matching edgebanding. Table Understructure - Foldable : MS powder coated foldable under structure with X base support
26
-
-
Café table on 8th floor floor of size 1050mm(Dia) x 750mm (H). Type : Loose Furniture. Table top : 25mm thick E1 Grade prelaminated table top with matching edgebanding. Table Understructure - Foldable : MS powder coated foldable under structure with X base support
10
-
-
Free Standing Storage Specifications - 1200H : Top & Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys. Storage 1 - 450mm(D) of size 1950 x 450 x 1200Ht
7
-
-
Free Standing Storage Specifications - 1200H : Top & Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys. Storage 2 - 450mm(D) of size 3150 x 450 x 1200Ht
1
-
-
Free Standing Storage Specifications - 1200H : Top & Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys. Storage 3 - 450mm(D) of size 1050 x 450 x 1200Ht
1
-
-
Free Standing Storage Specifications - 1200H : Top & Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys. Storage 4 - 450mm(D) of size 3000 x 450 x 1200Ht
5
-
-
Free Standing Storage Specifications - 1200H : Top & Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys. Storage 5 - 450mm(D) of size 1500 x 450 x 1200Ht
3
-
-
Free Standing Storage Specifications - 1200H : Top & Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys. Storage 6 - 450mm(D) of size 2400 x 450 x 1200Ht
6
-
-
Free Standing Storage Specifications - 1200H : Top & Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys. Storage 7 - 450mm(D) of size 750 x 450 x 1200Ht
4
-
-
Free Standing Storage Specifications - 1200H : Top & Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys. Storage 8 - 450mm(D) of size 4950 x 450 x 1200Ht
1
-
-
Free Standing Storage Specifications - 1200H : Top & Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys. Storage 9 - 450mm(D) of size 2550 x 450 x 1200Ht
1
-
-
Free Standing Storage Specifications - 1200H : Top & Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys. Storage 10 - 450mm(D) of size 2850 x 450 x 1200Ht
1
-
-
Free Standing Storage Specifications - 1200H : Top & Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys. Storage 11 - 450mm(D) of size 900 x 450 x 1200Ht
1
-
-
Free Standing Storage Specifications - 1200H : Top & Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys. Storage 16 - 450mm(D) of size 4650 x 450 x 1200Ht
1
-
-
Free Standing Storage Specifications -750H : Top - 25 mm thick & Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys. Storage 12 - 600mm(D) of size 1050 x 600 x 750Ht
5
-
-
Free Standing Storage Specifications -750H : Top - 25 mm thick & Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys. Storage 13 - 600mm(D) of size 3600 x 600 x 750Ht
1
-
-
Free Standing Storage Specifications -750H : Top - 25 mm thick & Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys. Storage 14 - 600mm(D) of size 1200 x 600 x 750Ht
1
-
-
Free Standing Storage Specifications -750H : Top - 25 mm thick & Body - Made of 18mm thick PLPB with Openable shutters and Aluminum D type handles + lock and keys. Storage 15 - 600mm(D) of size 1800 x 600 x 750Ht
1
-
-
Miscellaneous Works
-
-
-
Dismantling and demolishing existing structure or part of it, inclusive of all fittings and fixtures and taking away to approved locations or sorting / stacking of salvagable material as per directions of PM, cleaning of debris upto place of disposal as approved by local authurity & in fashion as directed or stored as directed by PM, required strengthening and providing safety measures during demolition, providing temporary partitions, obtaining insurance for work and labour, doing breaking during non working hours of office to avoid any hindrance to offices functioning, accounting for required security checks, providing and maintaining required tools and tackle, coordinating with the Architect, Structural Consultant, PM all complete. No extra claim shall be allowed on the method of dismantling adopted for any type of structural member. Damage caused to structure or part thereof which is not supposed to be dismantled, during the process of dismantling the required portions shall be made good by the Contractor at his own cost.
10
-
-
Providing and constructing 230mm or more thick brick masonry in Sub and Superstructure with locally available approved quality bricks having minimum crushing strength 35 Kg/Sq. cm and water absorption maximum 20% in cement sand mortar CM 1:6 (1 cement : 6 Sand) mixed with approved non-shrinking compound as per manufacturer’s instruction in specified courses of approved bond and including raking out joints, curing, doing independent double legged scaffolding, all complete as per specifications etc. at all heights, depths and leads, dewatering area where required complete as per specifications etc. all as directed by PM to his entire satisfaction.
10
-
-
Providing and constructing 150mm thick brick masonry with locally available approved quality fly ash brick having minimum crushing strength 35 Kg/Sq. cm and maximum water absorption 10%, in cement mortar CM 1:4 (1 cement : 4 Sand) mixed with approved non-shrinking compound as per manufacturer’s instruction in specified courses of approved bond and including providing RCC patli beam of 150/100mm x 100 mm at every 1.00m C/C with 2 nos. 8 mm dia Tor bars and 6 mm dia links at 300 c/c in cement concrete of mix M 20, required formwork complete with raking out joints, curing, doing independent double legged scaffolding as per specifications etc. at heights and leads all as directed by PM to his entire satisfaction.
50
-
-
Providing and constructing light weight solid concrete block masonry 100mm thick (Siporex or equivalent approved) minimum crushing strength 35 kg/sqcm in cement mortar in ratio 1:4 (1 cement : 4 sand) with striking and raking out joints, providing in situ patli beam of 100 x 100 mm at every 1000 mm centre to centre in concrete grade M 15 with 2 nos. 8 mm dia MS tor bars and 6 mm dia MS plain bar links at 300 mm centre to centre, required shuttering complete (RCC mullions shall be measured and paid under RCC items) with all lead, lifts and depths, curing and required independent double legged scaffolding etc. complete to the approval of the PM.
50
-
-
Plate signage on door shutter/ wall : Providing and fixing 1.2mm thick satin finish SS 304 grade signage plate Brushed with acid etching and Pu Automotive paint filling. All plates shall be made in CNC Water Jet Cutting, with all edges smoothen and all corner to be cute round. Acid etching should be done 0.3mm deep and fill with PU Automotive paint of approved make and shade. Graphic matter shall be letter, number, symbol, logo, etc. 'The plate shall be fixed on wall/ door shutter with the stud/ fastener, self adhesive tape, jointing sealant as per design/ specification and approved by PM. 'Only elevation area of sign plate shall be measured and paid. (If matter shall be on both sides, at that time both side area shall be considered for payment.) The rate shall also include cost of fabrication, engraving, acid etching, paint filling, fixing accessories, finishing, fastener, adhesive material, etc at all height and all lead. 'The contractor should submit the shop drawings based on concept drawing/ design and do the sampling and get it approval before execution.
15286
-
-
Providing, fixing AUTO GLOW photo luminescent Signages as per IS standard in Block/ Small Letters on rigid sheet with necessary wall or ceiling fittings size: 4"x 12"
160
-
-
Providing and wet drilling accurate and clean holes of specified diameter in RCC walls, slabs, beam or any other RCC member without vibration for laying service lines by core cutting (diamond drilling) machine of approved make including scaffolding, safety majors, disposing the debris, cleaning, making good, sealing the joints around the service pipes with suitable material (which paid separately), nominal reinforcement wherever required for all levels/ all height, after approval of PM etc. compete. Measurement shall be taken for the depth of holes in running meter for specified diameter. Holes shall made by authorized approved agency. 50mm dia
5
-
-
Providing and wet drilling accurate and clean holes of specified diameter in RCC walls, slabs, beam or any other RCC member without vibration for laying service lines by core cutting (diamond drilling) machine of approved make including scaffolding, safety majors, disposing the debris, cleaning, making good, sealing the joints around the service pipes with suitable material (which paid separately), nominal reinforcement wherever required for all levels/ all height, after approval of PM etc. compete. Measurement shall be taken for the depth of holes in running meter for specified diameter. Holes shall made by authorized approved agency. 75mm dia
5
-
-
Providing and wet drilling accurate and clean holes of specified diameter in RCC walls, slabs, beam or any other RCC member without vibration for laying service lines by core cutting (diamond drilling) machine of approved make including scaffolding, safety majors, disposing the debris, cleaning, making good, sealing the joints around the service pipes with suitable material (which paid separately), nominal reinforcement wherever required for all levels/ all height, after approval of PM etc. compete. Measurement shall be taken for the depth of holes in running meter for specified diameter. Holes shall made by authorized approved agency. 100mm dia
5
-
-
Providing and wet drilling accurate and clean holes of specified diameter in RCC walls, slabs, beam or any other RCC member without vibration for laying service lines by core cutting (diamond drilling) machine of approved make including scaffolding, safety majors, disposing the debris, cleaning, making good, sealing the joints around the service pipes with suitable material (which paid separately), nominal reinforcement wherever required for all levels/ all height, after approval of PM etc. compete. Measurement shall be taken for the depth of holes in running meter for specified diameter. Holes shall made by authorized approved agency. 150mm dia
5
-
-
Providing and wet drilling accurate and clean holes of specified diameter in RCC walls, slabs, beam or any other RCC member without vibration for laying service lines by core cutting (diamond drilling) machine of approved make including scaffolding, safety majors, disposing the debris, cleaning, making good, sealing the joints around the service pipes with suitable material (which paid separately), nominal reinforcement wherever required for all levels/ all height, after approval of PM etc. compete. Measurement shall be taken for the depth of holes in running meter for specified diameter. Holes shall made by authorized approved agency. 200mm dia
5
-
-
Providing and wet drilling accurate and clean holes of specified diameter in RCC walls, slabs, beam or any other RCC member without vibration for laying service lines by core cutting (diamond drilling) machine of approved make including scaffolding, safety majors, disposing the debris, cleaning, making good, sealing the joints around the service pipes with suitable material (which paid separately), nominal reinforcement wherever required for all levels/ all height, after approval of PM etc. compete. Measurement shall be taken for the depth of holes in running meter for specified diameter. Holes shall made by authorized approved agency. 250mm dia
5
-
-
SITC of Passenger Lifts
-
-
-
SITC of Passenger Lift (Typical), Gearless & Machine Room Less as per detail scope of work & technical specification of the tender including free maintenance for a period of 12 months from the date of commissioning. Model no. 5300IN of Schindler or equivalent model of Thyssenkrupp
4
-
-
SITC of Passenger Lift (Service), Gearless & Machine Room Less as per detail scope of work & technical specification of the tender including free maintenance for a period of 12 months from the date of commissioning. Model no. 5300IN of Schindler or equivalent model of Thyssenkrupp
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements