Numaligarh Refinery Limited Tender
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Costs
EMD
0Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Supply Of Strainers For Ug And Ag Piping For Nrep
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NRL_829358_1Bid Award Id
ViewTender No
TK-1ZZZA-MP-RFQ-0147Tender Authority
Numaligarh Refinery Limited ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
GROUP -2
Supply of Strainers (Int Coated / Galvanised) for NREP PROJECT incuding TPI charges as specified in Material Requisition. (Qty =152 Nos )
-
-
-
... More
STRAINER T-TYPE CS (GALV.), 150,0, MFR. STD., FLGD,B16.5, FF, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 10, START-UP OVERLAY -, A234 Gr.WPB-S(GALV.), WN FLG A105N (GALV.), BLIND FLG A105N, EPDM NSF61/ANSI 61-G, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY CLOTH FITTED. REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e.ONE FOR PRIMARY, OTHER FOR SECONDARY., CAST STRAINER OF MOC, A216 Gr.WCB(GALV.)AS A ALTERNATIVE IS, ALSO ACCEPTABLE.
2
-
-
... More
STRAINER T-TYPE CS INT.COATED, 150,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 10, START-UP OVERLAY -, INTERNALLY LIQUID EPOXY COATED, DOC. NR-0ZZZZ-CV-SPE-0019, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, EPDM NSF61/ANSI 61-G, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
6
-
-
... More
STRAINER T-TYPE CS INT.COATED, 150,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 10, START-UP OVERLAY -, INTERNALLY LIQUID EPOXY COATED, DOC. NR-0ZZZZ-CV-SPE-0019, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, EPDM NSF61/ANSI 61-G, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
12
-
-
... More
STRAINER T-TYPE CS INT.COATED, 150,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 10, START-UP OVERLAY -, INTERNALLY LIQUID EPOXY COATED, DOC. NR-0ZZZZ-CV-SPE-0019, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, EPDM NSF61/ANSI 61-G, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
13
-
-
... More
STRAINER T-TYPE CS INT.COATED, 150,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 10, START-UP OVERLAY -, INTERNALLY LIQUID EPOXY COATED, DOC. NR-0ZZZZ-CV-SPE-0019, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, EPDM NSF61/ANSI 61-G, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
9
-
-
... More
STRAINER T-TYPE CS INT.COATED, 150,0, MFR. STD., BW ENDS,SCH 20, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 40, START-UP OVERLAY -, INTERNALLY LIQUID EPOXY COATED, DOC. NR-0ZZZZ-CV-SPE-0019, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, EPDM NSF61/ANSI 61-G, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH 20, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
4
-
-
... More
STRAINER T-TYPE CS (GALV.), 150,0, MFR. STD., FLGD,B16.5, FF, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 10, START-UP OVERLAY -, A234 Gr.WPB-S(GALV.), WN FLG A105N (GALV.), BLIND FLG A105N, EPDM NSF61/ANSI 61-G, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY CLOTH FITTED. REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e.ONE FOR PRIMARY, OTHER FOR SECONDARY., CAST STRAINER OF MOC, A216 Gr.WCB(GALV.)AS A ALTERNATIVE IS, ALSO ACCEPTABLE.
3
-
-
... More
STRAINER T-TYPE CS INT.COATED, 150,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 10, START-UP OVERLAY -, INTERNALLY LIQUID EPOXY COATED, DOC. NR-0ZZZZ-CV-SPE-0019, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, EPDM NSF61/ANSI 61-G, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
8
-
-
... More
STRAINER T-TYPE CS INT.COATED, 150,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 10, START-UP OVERLAY -, INTERNALLY LIQUID EPOXY COATED, DOC. NR-0ZZZZ-CV-SPE-0019, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, EPDM NSF61/ANSI 61-G, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
35
-
-
... More
STRAINER T-TYPE CS INT.COATED, 150,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 10, START-UP OVERLAY -, INTERNALLY LIQUID EPOXY COATED, DOC. NR-0ZZZZ-CV-SPE-0019, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, EPDM NSF61/ANSI 61-G, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
30
-
-
... More
STRAINER T-TYPE CS INT.COATED, 150,0, MFR. STD., BW ENDS,SCH 20, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 40, START-UP OVERLAY -, INTERNALLY LIQUID EPOXY COATED, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, EPDM NSF61/ANSI 61-G, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH 20, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., (i.e. AS PER NRL DRG.), STRAINER SHALL BE SUPPLIED WITH START-UP, OVERALY CLOTH FITTED. REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BY EASY MEANS WITH, MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS I.E.(ONE FOR PRIMARY, OTHER FOR SECONDARY).
4
-
-
... More
STRAINER T-TYPE CS (GALV.), 150,0, MFR. STD., FLGD,B16.5, FF, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 10, START-UP OVERLAY -, A234 Gr.WPB-S(GALV.), WN FLG A105N (GALV.), BLIND FLG A105N, EPDM NSF61/ANSI 61-G, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY CLOTH FITTED. REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e.ONE FOR PRIMARY, OTHER FOR SECONDARY., CAST STRAINER OF MOC, A216 Gr.WCB(GALV.)AS A ALTERNATIVE IS, ALSO ACCEPTABLE.
1
-
-
... More
STRAINER T-TYPE CS (GALV.), 150,0, MFR. STD., FLGD,B16.5, FF, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 10, START-UP OVERLAY -, A234 Gr.WPB-S(GALV.), WN FLG A105N (GALV.), BLIND FLG A105N, EPDM NSF61/ANSI 61-G, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY CLOTH FITTED. REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e.ONE FOR PRIMARY, OTHER FOR SECONDARY., CAST STRAINER OF MOC, A216 Gr.WCB(GALV.)AS A ALTERNATIVE IS, ALSO ACCEPTABLE.
3
-
-
... More
STRAINER T-TYPE CS INT.COATED, 150,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 10, START-UP OVERLAY -, INTERNALLY LIQUID EPOXY COATED, DOC. NR-0ZZZZ-CV-SPE-0019, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, EPDM NSF61/ANSI 61-G, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS INT.COATED, 150,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 10, START-UP OVERLAY -
20
-
-
... More
GROUP -3
Supply of Strainers (NACE / Caustic / NACE+Caustic) for NREP PROJECT incuding TPI charges as specified in Material Requisition. (Qty =66 Nos )
-
-
-
... More
STRAINER T-TYPE CS (NACE), 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE CS (NACE), 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE CS (NACE), 150,0, MFR. STD., BW ENDS,SCH 160, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH 160, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE CS (CAUSTIC), 150,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN MONEL, OTHER INTER. MONEL, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT
2
-
-
... More
STRAINER T-TYPE CS (CAUSTIC), 150,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN MONEL, OTHER INTER. MONEL, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT
2
-
-
... More
STRAINER T-TYP CS(NACE+CAUSTIC, 150,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE CS (CAUSTIC), 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN MONEL, OTHER INTER. MONEL, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT
2
-
-
... More
STRAINER T-TYPE CS (CAUSTIC), 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN MONEL, OTHER INTER. MONEL, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT
2
-
-
... More
STRAINER T-TYPE CS (CAUSTIC), 150,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN MONEL, OTHER INTER. MONEL, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT
2
-
-
... More
STRAINER T-TYPE CS (NACE), 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE CS (NACE), 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE CS (NACE), 150,0, MFR. STD., BW ENDS,SCH 20, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH 20, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE CS (NACE), 150,0, MFR. STD., BW ENDS,SCH 20, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH 20, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
3
-
-
... More
STRAINER T-TYPE CS (NACE), 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE CS (NACE), 150,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
1
-
-
... More
STRAINER T-TYPE CS (NACE), 300,0, MFR. STD., BW ENDS,SCH 40, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH 40, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE CS (NACE), 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE CS (NACE), 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE CS (NACE), 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE CS (NACE), 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE CS (NACE), 150,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 3, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE CS (NACE), 150,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 3, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE CS (NACE), 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYP CS(NACE+CAUSTIC, 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYP CS(NACE+CAUSTIC, 150,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 3, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYP CS(NACE+CAUSTIC, 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYP CS(NACE+CAUSTIC, 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYP CS(NACE+CAUSTIC, 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE CS (NACE), 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE CS (NACE), 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE CS (NACE), 150,0, MFR. STD., BW ENDS,SCH 160, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH 160, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE CS (NACE), 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE CS (NACE), 150,0, MFR. STD., BW ENDS,SCH 160, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 GrB7M/A194Gr2HM, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH 160, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
GROUP -4
Supply of Strainers ( Y Type - Cast/Fab.) for NREP PROJECT incuding TPI charges as specified in Material Requisition. (Qty =27 Nos )
-
-
-
... More
STRAINER Y-TYPE AS (H2 SER.), 300,0, MFR. STD., FLGD,B16.5, RF, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 200, START-UP OVERLAY -, A217 Gr.WC6, INTERNALS SS 304, BLIND FLG A182 Gr.F11 CL.2, SP WD SS316L+GRPH, A193 GrB16/A194Gr.16, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), ANY WELDS SHALL BE SUBJECT TO PWHT
1
-
-
... More
STRAINER Y-TYPE AS (H2 SER.), 300,0, MFR. STD., FLGD,B16.5, RF, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 200, START-UP OVERLAY -, A217 Gr.WC6, INTERNALS SS 304, BLIND FLG A182 Gr.F11 CL.2, SP WD SS316L+GRPH, A193 GrB16/A194Gr.16, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), ANY WELDS SHALL BE SUBJECT TO PWHT
1
-
-
... More
STRAINER Y-TYPE AS (H2 SER.), 300,0, MFR. STD., FLGD,B16.5, RF, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 200, START-UP OVERLAY -, A217 Gr.WC6, INTERNALS SS 304, BLIND FLG A182 Gr.F11 CL.2, SP WD SS316L+GRPH, A193 GrB16/A194Gr.16, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), ANY WELDS SHALL BE SUBJECT TO PWHT
1
-
-
... More
STRAINER Y-TYPE AS (H2 SER.), 300,0, MFR. STD., FLGD,B16.5, RF, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 200, START-UP OVERLAY -, A217 Gr.WC6, INTERNALS SS 304, BLIND FLG A182 Gr.F11 CL.2, SP WD SS316L+GRPH, A193 GrB16/A194Gr.16, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), ANY WELDS SHALL BE SUBJECT TO PWHT
1
-
-
... More
STRAINER Y-TYPE AS (H2 SER.), 300,0, MFR. STD., FLGD,B16.5, RF, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 200, START-UP OVERLAY -, A217 Gr.WC6, INTERNALS SS 304, BLIND FLG A182 Gr.F11 CL.2, SP WD SS316L+GRPH, A193 GrB16/A194Gr.16, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), ANY WELDS SHALL BE SUBJECT TO PWHT
1
-
-
... More
STRAINER Y-TYPE AS (H2 SER.), 300,0, MFR. STD., FLGD,B16.5, RF, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 200, START-UP OVERLAY -, A217 Gr.WC6, INTERNALS SS 304, BLIND FLG A182 Gr.F11 CL.2, SP WD SS316L+GRPH, A193 GrB16/A194Gr.16, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), ANY WELDS SHALL BE SUBJECT TO PWHT
1
-
-
... More
STRAINER Y-TYPE AS (H2 SER.), 300,0, MFR. STD., FLGD,B16.5, RF, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 200, START-UP OVERLAY -, A217 Gr.WC6, INTERNALS SS 304, BLIND FLG A182 Gr.F11 CL.2, SP WD SS316L+GRPH, A193 GrB16/A194Gr.16, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), ANY WELDS SHALL BE SUBJECT TO PWHT
1
-
-
... More
STRAINER Y-TYPE CS, 300,0, MFR. STD., FLGD,B16.5, RF, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 200, START-UP OVERLAY -, A216 Gr.WCB, INTERNALS SS 304, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION)
1
-
-
... More
STRAINER Y-TYPE AS (H2 SER.), 300,0, MFR. STD., FLGD,B16.5, RF, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 200, START-UP OVERLAY -, A217 Gr.WC6, INTERNALS SS 304, BLIND FLG A182 Gr.F11 CL.2, SP WD SS316L+GRPH, A193 GrB16/A194Gr.16, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), ANY WELDS SHALL BE SUBJECT TO PWHT
1
-
-
... More
STRAINER Y-TYPE AS (H2 SER.), 300,0, MFR. STD., FLGD,B16.5, RF, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 200, START-UP OVERLAY -, A217 Gr.WC6, INTERNALS SS 304, BLIND FLG A182 Gr.F11 CL.2, SP WD SS316L+GRPH, A193 GrB16/A194Gr.16, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), ANY WELDS SHALL BE SUBJECT TO PWHT
1
-
-
... More
STRAINER Y-TYPE AS (H2 SER.), 300,0, MFR. STD., FLGD,B16.5, RF, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 200, START-UP OVERLAY -, A217 Gr.WC6, INTERNALS SS 304, BLIND FLG A182 Gr.F11 CL.2, SP WD SS316L+GRPH, A193 GrB16/A194Gr.16, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), ANY WELDS SHALL BE SUBJECT TO PWHT
1
-
-
... More
STRAINER Y-TYPE AS (H2 SER.), 300,0, MFR. STD., FLGD,B16.5, RF, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 200, START-UP OVERLAY -, A217 Gr.WC6, INTERNALS SS 304, BLIND FLG A182 Gr.F11 CL.2, SP WD SS316L+GRPH, A193 GrB16/A194Gr.16, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), ANY WELDS SHALL BE SUBJECT TO PWHT
1
-
-
... More
STRAINER Y-TYPE AS, 300,0, MFR. STD., FLGD,B16.5, RF, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY -, A217 Gr.C12, INTERNALS SS 304, BLIND FLG A182 Gr.F9, SP WD SS316L+GRPH, A193 GrB16/A194Gr.16, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), ANY WELDS SHALL BE SUBJECT TO PWHT
5
-
-
... More
STRAINER Y-TYPE CS (IBR), 300,0, MFR. STD., FLGD,B16.5, RF, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY -, A216 Gr.WCB, INTERNALS SS 304, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), IBR CERTIFICATE IN FORM IIIC REQUIRED.
2
-
-
... More
STRAINER Y-TYPE CS, 300,0, MFR. STD., FLGD,B16.5, RF, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY -, A216 Gr.WCB, INTERNALS SS 304, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION)
1
-
-
... More
STRAINER Y-TYPE CS, 300,0, MFR. STD., FLGD,B16.5, RF, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY -, A216 Gr.WCB, INTERNALS SS 304, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION)
1
-
-
... More
STRAINER Y-TYPE CS, 300,0, MFR. STD., FLGD,B16.5, RF, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY -, A216 Gr.WCB, INTERNALS SS 304, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION)
3
-
-
... More
STRAINER Y-TYPE CS, 300,0, MFR. STD., FLGD,B16.5, RF, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY -, A216 Gr.WCB, INTERNALS SS 304, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION)
1
-
-
... More
STRAINER Y-TYPE SS, 300,0, MFR. STD., FLGD,B16.5, RF, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A351 Gr.CF8C, INTERNALS SS 321, BLIND FLG A182 Gr.F321, SP WD SS 321 + GRPH, A453 GR.660,CL.A, SCREEN SS 321, OTHER INTER. SS 321, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
1
-
-
... More
STRAINER Y-TYPE SS, 300,0, MFR. STD., FLGD,B16.5, RF, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A351 Gr.CF8C, INTERNALS SS 321, BLIND FLG A182 Gr.F321, SP WD SS 321 + GRPH, A453 GR.660,CL.A, SCREEN SS 321, OTHER INTER. SS 321, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
1
-
-
... More
GROUP -5
Supply of Strainers ( Y Type - Forged) for NREP PROJECT incuding TPI charges as specified in Material Requisition. (Qty =111 Nos )
-
-
-
... More
STRAINER Y-TYPE CS (GALV.), 800,0, MFR. STD., THREADED ENDS,FNPT, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 10, START-UP OVERLAY -, A105N (GALV.), INTERNALS SS 304, BLIND FLG A105N, EPDM NSF61/ANSI 61-G, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, SUPP. REQUIREMENTS, FOR SIZE =1 1/2" , TAPER INTERNAL THREADS, AS PER ASME/ANSI B1.20.1, FOR SIZE 2" TO 6",TAPER INTERNAL THREADS, AS PER IS554, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 1/2" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION)
2
-
-
... More
STRAINER Y-TYPE CS, 800,0, MFR. STD., SW ENDS,B16.11, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 200, START-UP OVERLAY -, A105N, INTERNALS SS 304, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 1/2" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION)
13
-
-
... More
STRAINER Y-TYPE CS, 800,0, MFR. STD., SW ENDS,B16.11, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 200, START-UP OVERLAY -, A105N, INTERNALS SS 304, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 1/2" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION)
8
-
-
... More
STRAINER Y-TYPE CS, 800,0, MFR. STD., SW ENDS,B16.11, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 200, START-UP OVERLAY -, A105N, INTERNALS SS 304, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 1/2" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION)
3
-
-
... More
STRAINER Y-TYPE CS, 800,0, MFR. STD., SW ENDS,B16.11, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 200, START-UP OVERLAY -, A105N, INTERNALS SS 304, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 1/2" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION)
3
-
-
... More
STRAINER Y-TYPE CS, 800,0, MFR. STD., SW ENDS,B16.11, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 200, START-UP OVERLAY -, A105N, INTERNALS SS 304, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 1/2" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION)
11
-
-
... More
STRAINER Y-TYPE CS, 800,0, MFR. STD., SW ENDS,B16.11, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH 200, START-UP OVERLAY -, A105N, INTERNALS SS 304, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 1/2" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION)
11
-
-
... More
STRAINER Y-TYPE AS, 300,0, MFR. STD., BW ENDS,SCH 160, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY -, A182 Gr.F9, INTERNALS SS 304, BLIND FLG A182 Gr.F9, SP WD SS316L+GRPH, A193 GrB16/A194Gr.16, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH 160, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 1/2" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), ANY WELDS SHALL BE SUBJECT TO PWHT
6
-
-
... More
STRAINER Y-TYPE AS, 300,0, MFR. STD., BW ENDS,SCH 160, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY -, A182 Gr.F9, INTERNALS SS 304, BLIND FLG A182 Gr.F9, SP WD SS316L+GRPH, A193 GrB16/A194Gr.16, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH 160, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 1/2" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), ANY WELDS SHALL BE SUBJECT TO PWHT
40
-
-
... More
STRAINER Y-TYPE CS (IBR), 800,0, MFR. STD., SW ENDS,B16.11, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY -, A105N, INTERNALS SS 304, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 1/2" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), IBR CERTIFICATE IN FORM IIIC REQUIRED.
2
-
-
... More
STRAINER Y-TYPE CS, 800,0, MFR. STD., SW ENDS,B16.11, Y TYPE , REMOVABLE SCREEN, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY -, A105N, INTERNALS SS 304, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 1/2" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 3 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION)
12
-
-
... More
GROUP -6
Supply of Strainers (MOC - LTCS) for NREP PROJECT incuding TPI charges as specified in Material Requisition. (Qty =16 Nos )
-
-
-
... More
STRAINER T-TYPE LTCS, 300,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A420 Gr.WPL6-S, WN FLG A350 Gr.LF2 CL.1, BLIND FLG A350 Gr.LF2 CL.1, SP WD SS316L+GRPH, A320 Gr.L7/A194 Gr.4, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE LTCS, 300,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A420 Gr.WPL6-S, WN FLG A350 Gr.LF2 CL.1, BLIND FLG A350 Gr.LF2 CL.1, SP WD SS316L+GRPH, A320 Gr.L7/A194 Gr.4, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE LTCS (A+C), 300,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, AMINE+CAUSTIC, A420 Gr.WPL6-S, WN FLG A350 Gr.LF2 CL.1, BLIND FLG A350 Gr.LF2 CL.1, SP WD SS316L+GRPH, A320 Gr.L7/A194 Gr.4, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT
2
-
-
... More
STRAINER T-TYPE LTCS, 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A420 Gr.WPL6-S, WN FLG A350 Gr.LF2 CL.1, BLIND FLG A350 Gr.LF2 CL.1, SP WD SS316L+GRPH, A320 Gr.L7/A194 Gr.4, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE LTCS (NACE), 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, SERVICE NACE, CATEGORY 1, A420 Gr.WPL6-S, WN FLG A350 Gr.LF2 CL.1, BLIND FLG A350 Gr.LF2 CL.1, SP WD SS316L+GRPH, A320 GrL7M/A194 Gr7M, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043
2
-
-
... More
STRAINER T-TYPE LTCS, 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A420 Gr.WPL6-S, WN FLG A350 Gr.LF2 CL.1, BLIND FLG A350 Gr.LF2 CL.1, SP WD SS316L+GRPH, A320 Gr.L7/A194 Gr.4, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE LTCS, 300,0, MFR. STD., BW ENDS,SCH 40, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, WELD FACTOR E = 1.0, A420 Gr.WPL6-W, WN FLG A350 Gr.LF2 CL.1, BLIND FLG A350 Gr.LF2 CL.1, SP WD SS316L+GRPH, A320 Gr.L7/A194 Gr.4, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH 40, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE LTCS, 600,0, MFR. STD., BW ENDS,SCH 80, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A420 Gr.WPL6-S, WN FLG A350 Gr.LF2 CL.1, BLIND FLG A350 Gr.LF2 CL.1, SP WD SS316L+GRPH, A320 Gr.L7/A194 Gr.4, SCREEN SS 316, OTHER INTER. SS 316, MAT. DELIV. COND. SCH 80, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
GROUP -7
Supply of Strainers (Strainer Std Size upto 12") for NREP PROJECT incuding TPI charges as specified in Material Requisition. (Qty =62 Nos )
-
-
-
... More
STRAINER T-TYPE CS, 600,0, MFR. STD., BW ENDS,SCH 80, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH 80, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE SS DUAL, 300,0, MFR. STD., BW ENDS,SCH 80S, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A403 Gr.WP304/304L-S, WN FLG A182 Gr.F304/304L, BLIND FLG A182 Gr.F304/304L, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN DUAL SS 304/304L, OTHER INTER. DUAL SS 304/304L, MAT. DELIV. COND. SCH 80S, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
2
-
-
... More
STRAINER T-TYPE CS (H2 SER.), 300,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE SS DUAL, 150,0, MFR. STD., BW ENDS,SCH 40S, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A403 Gr.WP316/316L-S, WN FLG A182 Gr.F316/316L, BLIND FLG A182 Gr.F316/316L, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN DUAL SS 316/316L, OTHER INTER. DUAL SS 316/316L, MAT. DELIV. COND. SCH 40S, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03%
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 600,0, MFR. STD., BW ENDS,SCH 80, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH 80, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 150,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 3, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE AS, 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WP9-S CL.1, WN FLG A182 Gr.F9, BLIND FLG A182 Gr.F9, SP WD SS316L+GRPH, A193 GrB16/A194Gr.16, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 150,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 3, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 150,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 3, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 3, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 150,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 150,0, MFR. STD., BW ENDS,SCH STD, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 5, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH STD, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
GROUP -8
Supply of Strainers (Strainer Std Size more than 12") for NREP PROJECT incuding TPI charges as specified in Material Requisition. (Qty =12 Nos )
-
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH 30, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 3, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, WELD FACTOR E = 1.0, A234 Gr.WPB-W, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH 30, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
3
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH 40, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 3, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, WELD FACTOR E = 1.0, A234 Gr.WPB-W, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH 40, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
... More
STRAINER T-TYPE AS, 300,0, MFR. STD., BW ENDS,SCH 60, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 3, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, WELD FACTOR E = 1.0, A234 Gr.WP5-W CL.1, WN FLG A182 Gr.F5, BLIND FLG A182 Gr.F5, SP WD SS316L+GRPH, A193 GrB16/A194Gr.16, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH 60, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY)., ANY WELDS SHALL BE SUBJECT TO PWHT
3
-
-
... More
STRAINER T-TYPE CS, 300,0, MFR. STD., BW ENDS,SCH XS, DESIGN DRAWER TYPE, G.A. & DIM. DETAILS ACC. TO, DOC no. NR-0ZZZZ-PI-SPE-0020, PERFORATED PLATE ASTM E674, MESH ASTM E2016, MESH SIZE, NORMAL OPERATION MESH TYPE 4, START-UP OVERLAY MESH 40 &, WIRE DIA 0.254 MM, A234 Gr.WPB-S, WN FLG A105N, BLIND FLG A105N, SP WD SS316L+GRPH, A193 Gr.B7/A194Gr.2H, SCREEN SS 304, OTHER INTER. SS 304, MAT. DELIV. COND. SCH XS, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005, TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0007, TK-1ZZZA-PI-SPE-0008, TK-1ZZZA-PI-SPE-0012 AND IN-0042., STRAINER WITH DRAIN PLUG ASSEMBLY OF, 3/4" NPT., CLEAR STRAINER AREA TO NOMINAL, AREA RATIO SHALL BE MINIMUM 1.5 FOR NORMAL, OPERATION (AT UNCLOGGED CONDITION), THIS RATIO IS BASED ON, CONSTRUCTION, WITHOUT ANY INTERMEDIATE, EXTENSION SPOOL PIECE., i.e. AS PER NRL DRG., STRAINER SHALL BE SUPPLIED WITH START-UP, OVERLAY ELEMENT FITTED.REMOVAL OF IT BEFORE, NORMAL OPERATION SHALL BE BY EASY MEANS, WITH MINIMUM USE OF MECHANICAL TOOLS., ALTERNATIVELY VENDOR CAN PROVIDE, TWO SEPARATE ELEMENTS i.e. ONE FOR PRIMARY, OTHER FOR SECONDARY).
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements