Northeast Frontier Railway Tender

Supply and wiring of 5/6 amp, 5 pin plug point through good quality hard PVC casing 4 with associated accessories for surface type wiring by 1.5 mm sq single core PVC insulated flexible copper cable with earth continuity by 16 SWG bare copper wire and flush type 5/6 amp controlling switch to be provided on hard plastic moulded board. Casing shall be fixed on the wall / ceiling by MS (6x40 mm) screw at an interval not more than 300mm.

Supply and wiring of Geyser point by 15/16 amp, 6 pin plug point through good quality hard PVC casing with associated accessories for surface type wiring by 4 mm sq single core PVC insulated flexible copper cable with earth continuity by 16 SWG bare copper wire and flush type 15/16 amp controlling switch to be provided on hard plastic moulded board. Casing shall be fixed on the wall / ceiling by MS (6x40 mm) screw at an interval not more than 300mm .

Supply & fixing of heavy duty exhaust fan 305/300mm sweep including all fixing accessories with wall cutting & frame louver shutter. All consumables regarding fixing arrangement will be supplied by the contractor as per the direction of engineer in charge at site.

Supply, fitting, fixing, connection & commissioning of 18/20 watt LED indoor fitting complete set with LED tube and other accessories. The fitting shall be connected by 1.5 sq mm flexible copper wire through pvc pipes/casing as required at site. 8

Supply installation and fitting of 7 watt, LED BULB

Supply, installation, connection, testing and commissioning of 8 Way SPN MCB DB double door with i) 32 Amps DP MCB-2 Nos ii) 16A amps SP MCB -4 Nos including required accessories.

Supply and drawing of Sub main line by single-core 6 sq mm PVC insulated 10 unsheathed FRLSH flexible copper cable with earth continuityby 16SWG bare copper wire through good quality hard PVCcasing/Conduit. (One RM consists of2 wires). Casing/conduit shall befixed on the wall/ ceiling by MS(6x40 mm) screw mat at aninterval not more than 300mm.

Supply and drawing of sub- main line by single core 4 sq mm PVC insulated flexible 11 copper cable with earth continuity by 16 SWG bare copper wire through good quality hard PVC casing (One RM consists of 2 wires). Casing shall be fixed on the wall / ceiling by MS (6x40 mm) screw at an interval not more than 300mm.

Supply, installation, testing and commissioning of water cooler 150 Ltr storage capacity ,, Cooler Cabinet sheet material should be Stainless Steel (Grade AISI 304), Conformity to Indian standard IS: 1475 latest 13

Supply and fitting of 5 kVA, sine wave inverter, 72V system with trolley.

Supply and testing of 150 AH battery with latest amendments having warranty of one years. All consumables regarding fixing arrangement will be supplied by the contractor as per the direction of engineer in charge at site.

Supply and erection of earthing by 50 mm GI pipe, 3 mtr long 4.05mm thickness 15 including construction of earth pit, RCC earth cover slab with filling/mixing of salt, charcoal etc of required quantity and earth continuity by 25x3mm GI strip with GI nuts bolts washer etc. including welding, earth resistance flag etc. as per Drg. No. NFR/CEE/CON/GS/10(earthing system)/04/2016 & as per Technical Specification No. NFR/ELECT/GS/10 (EARTHING SYSTEM).

Supply, erection, installation, testing, commissioning of floor mounted LT panel 16 consisting of i) 4 pole 250 Amp. MCCB -1 nos. ii) 4 pole 100 Amp.MCCB - 2 nos.,(iii) 4 pole 63 Amp.MCCB - 2 nos (iv) 4 pole 32 Amp.MCCB - 2 nos., with copper bus bar 250 Amp., incicator lamp ammeter, voltmeter etc. - 1 complete set.All MCCB's Ics = 100% of Icu.

Supply,erection, installation & commissioning of 6 Mtr long Octagonal pole hot dip galvanized minimum 65 micron zinc coating with sectional dia 70 mm (top),130 mm (bottom).overall sectional thickness 3 mm complete with base plate of size (220x220x12)mm, 4 nos 600 mm long foundation bolt of suitable dia along with pipe cap type pole bracket 1000 mm long double arm made with suitable cap pipe 48.3 mm,3.25 mm thick arms.Junction plate made of 6 mm thick Bakelite sheet with 4/6 amps SP MCB b curve & 4 nos end terminals to be mounted inside the base compartment of Octagonal pole. The work will also include supply and erection of PCC/RCC works for foundation of size 55 cm x 55 cm and depth 1 Mtr below GL and height 20 cm above GL in proportion 1:2:4 with stone chips of maximum aggregate size 20 mm and less including cement,sand & provision of 75 mm dia pvc pipe for cable entry with excavation of earth for foundation of all depth and all places,nature and condition of soil including de-watering,shoring, shuttering, batchning,mixing,placing,leveling,carrying,etc and refilling the pit after completion of foundation work from excavated earth or borrowed pit by contractors own arrangement for octagonal pole. 17 (considering SBC of soil is 10 Ton/sq.Mtr)

Supply, fitting, fixing, testing, installation, wiring & commissioning of 45 Watt outdoor type LED street light fitting made up of pressure die cast aluminum housing with high power LED as 18 lighting source and lens embedded PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07. The street light must be conforms to the technical specification i.e. attached in the tender document. The whole work shall be executed as per direction of Engineer in charge at site.

Supply and wiring of light point through good quality hard PVC casing with associated 19 accessories for surface type wiring by 1.5 mm sq single core PVC insulated flexible copper cable and flush type 5/6 amp controlling switch to be provided on hard plastic moulded board. Casing shall be fixed on the wall / ceiling by MS screw (6x40 mm) at an interval not more than 300mm.

Supply and wiring of ceiling fan point through good quality hard PVC casing with associated accessories for surface type wiring by 1.5 mm sq single core PVC insulated flexible copper 20 cable with earth continuity by 16 SWG bare copper wire and flush type 5/6 amp controlling switch to be provided on hard plastic moulded board including 300W box type stepped electronic fan regulator. Ceiling fan connection shall be done through ceiling rose. Casing shall be fixed on the wall / ceiling by MS (6x40 mm) screw at an interval not more than 300mm

Supply, installation, testing & commissioning of LED street light fitting 90W complete with LED lamps having system lumen 130 lumen/watt for shed light with GI pipe.

Supply & installation of 80W LED bay light fitting for rolling/focus light with in-built 22 electronic driver and lamps housed in high grade aluminium pressure die cast with toughened glass and lamp efficiency > 120 lumen per watt, including connecting with all accessories etc. as per CEE's specification No. SCR/LED (ID) LIGHT FITTINGS/005 (Amdt.2)-2017 .

Supply ,fitting,fixing of 450 mm sweep heavy duty air circulating fan as per instruction of Engineer in charge at site .

Supply and erection of earthing by 50 mm GI pipe, 3 mtr long 4.05mm thickness 24 including construction of earth pit, RCC earth cover slab with filling/mixing of salt, charcoal etc of required quantity and earth continuity by 25x3mm GI strip with GI nuts bolts washer etc. including welding, earth resistance flag etc. as per Drg. No. NFR/CEE/CON/GS/10(earthing system)/04/2016 & as per Technical Specification No. NFR/ELECT/GS/10 (EARTHING SYSTEM).

Supply installation testing & commissioning of constant voltage type battery charger having input 415 V (A), output 110 - 155 V (DC), capacity 1x200 Amps (single circuit) asper direction 25 of Engineer In Charge at site. (The work to be executed as per direction of engineer in charge at site. If any other items have been omitted but required for efficient working of battery charger it would be responsibility of contractor to supply and provide such items. However the quoted rate shall be inclusive of those items.)

Supply installation testing and commissioning of Battery charging terminal (110V) 26 (including the foundation) made of zinc plated and zinc passivated, fibre glass reinforced plastc from shhet moulding compound of 25% glass conforming to RDSO Drg No. ELECT.DTE.SKEL-3929 including suitable size clamps, nuts, bolts for fixing as per direction of ERngineer In Charge at site.

Supply & erection of BusBar Chamber with Copper Bars 200A, 4way, 415V for distribution PreCooling point.

Supply & erection of industrial socket 32A, 4 pin (3ph+ E) splash proof conforming to IP : 44

Supply, installation, connection, testing and commissioning of 8 Way SPN MCB DB double door with i) 32 Amps DP MCB-2 Nos ii) 16A amps SP MCB -4 Nos including required accessories.

Supply of Single core 50 sqmm Aluminium unarmoured LT Power Cables, PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.

Laying, commissioning of LT/HT cable XLPE insulated power cables with armoured 31 aluminum conductors of different sizes partly along the pole and partly through ground in cable trench. Loading, unloading & carrying of cable to actual work site by contractor own arrangement as per instruction of Engineer in charge at site. (Cable will be supplied by Railway.)

Supply and drawing of Sub main line by single-core 6 sq mm PVC insulated 32 unsheathed FRLSH flexible copper cable with earth continuityby 16SWG bare copper wire through good quality hard PVCcasing/Conduit. (One RM consists of2 wires). Casing/conduit shall befixed on the wall/ ceiling by MS(6x40 mm) screw mat at aninterval not more than 300mm.

Supply and drawing of sub- main line by single core 4 sq mm PVC insulated flexible 33 copper cable with earth continuity by 16 SWG bare copper wire through good quality hard PVC casing (One RM consists of 2 wires). Casing shall be fixed on the wall / ceiling by MS (6x40 mm) screw at an interval not more than 300mm.

Supply, fitting and laying of Single core 2.5 sqmm Flame Retardant PVC insulated industrial grade multistrand copper conductor(unsheathed) flexible cable voltage grade upto1100 Volt.(Conforming to IS 694:2010)