Northeast Frontier Railway Tender
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Technical
Technical
Financial
Technical Capacity
... View More
The bidder must have successfully completed or substantially completed specific categories of work(s) during the last 07 years. The required prior work experience includes: (i) Three similar works each costing not less than 30% of the advertised value of the tender, (ii) Two similar works each costing not less than 40% of the advertised value of the tender, or (iii) One similar work costing not less than 60% of the advertised value of the tender. The similar work is defined as signalling works of RRI or PI or EI indoor works with or without outdoor works with supply of EI or relay and other signalling equipment. The bidder needs to provide details of works completed in the last 7 years, including a list of completed similar works and a Completion Certificate for similar natured works. The specific values and percentages mentioned are 30%, 40%, and 60% of the advertised value of the tender.
Costs
EMD
₹ 2,57,300Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Provision Of Msdac In Water Logging Track Sections At Aza Yard Of Rny Division.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
RN-ST-20-2024-25-RANGIYA DIVISION-S AND T/N F RLYTender No
RN-ST-20-2024-25Tender Authority
Northeast Frontier Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Tools Kit for Multi section Digital Axle counter Service test panel including meter for 4 test of track equipment, tools for mounting and adjustment of track equipment and standard jig for drilling holes in rail it should be as per Principal manufacturers (OEM) recommended list adequate for installation, day to day maintenance and adjustment of indoor and outdoor gears. This shall also include kit for making and drilling of holes on rail.
1
121429
121429.83
... More
A set of complete Earthing and bonding system as per code of practice RDSO/SPN/197/2008 or latest to construct earthing of
20
12277
245549
... More
Copper tape 25X3 mm for interconnection of earth electrodes as per RDSO Drawing SDO/RDSO/&B/001 or latest
-
-
6
... More
Supply of Apparatus case (Large) as per RDSO Drg No- RDSO/S-11500 or latest fitted with key lock (E-Type) with key of ward No-11 confirming to specification IRS:S/30 and Drg No-S 3376/M & S 3377M or latest.
8
20624
164993.76
... More
Disconnect Terminal block for Four conductor with screwless Cage Clamp type/sliding 8 switch disconnect as per RDSO Specification No. RDSO/SPN/189/2004 version 1.2, for each conductor size upto 2.5 sq. mm. Each Terminal block equipped with two markers on top and bottom. 1 End plate & 2 end clamps per 20 terminals. Suitable rails for fitting terminal blocks.
500
260
130205
... More
Thermo Shrink Jointing Kit (Straight through Joint) for jointing underground jelly filled quad cable 4/6 quad (0.9mm) as per spec no. IRS:TC 77-2012 (Rev.3) with Amendment No.3 or latest amendment/specification.
5
3478
17392.4
... More
Double walled corrugated (DWC) Size of Outer Dia 175 mm / inner dia 148 mm, 10 electrex/telerex/optirex or similar make as per TEC specifications GR/DWC34/01 IS 14930 part-II along with socket/coupler and T joints wherever required for underground power/ signalling/ telecommunication cable protection.
500
239
119950
... More
Non deteriorating type low voltage cylindrical head cartridge ELECTRIC fuse 2A as per Spec No IRS/S/78/92 with latest amendments.
30
158
4747.5
... More
Fuse block made of PBT/polycarbonate ae per specification IRS S 75/2006 and RDSO drawing no. SA-23748 Alt 4 suitable for cartridge fuse block cylindrical head fuse links
40
200
8021.6
... More
16/0.2mm size tinned flexible single core indoor wire IRS : S- 76/89 Amend. No. 2 or with latest amendment/specification, PVC coated in different colours as per technical specification and to be supplied in coils of 100 meters
8
700
5607.28
... More
Alternation & Modification in Existing KYOSAN EI System in connection with addition/alternation of signal at AZA station
-
-
4801927.24
... More
Supply of Digital Multimeter for diagnosis and measuring parameters. Make Fluke, KYORITSU OR SIMILAR.
1
8954
8954.62
... More
Supply of electronic Cable route tracer/locator with underground cable and pipe 16 locating receiver and cable avoidance tool that provide location of armoured OFC , signalling and telecom , power cable etc. make : C Scope Stanley/3M Dynatel , model: DXL-4 DBG /2273M-iD 30 or superior.
1
449150
449150.74
... More
Supply & erection of cable of Relay rack frame scaffolding and ladder/angle for relay 17 room , power equipment room, battery room, and other places as required, all oven backed and powder coated with biscuit mat colour corrosive resistant and final finish with siemens grey (sigma) enamelled paint, complete with insulators, gouting bolts, tripods rack fittings, ladder arrangement and all necessary fittings supports, insulators, string rods in support cable, and other accessories etc.
1
26550
26550.53
... More
Supply & Erection of cable termination rack, frame scaffolding /ladder /angle, all oven backed and powder coated with biscuit Mat colour corrosive resistant and final finish with siemens 18 Grey (Sigma) enamelled paint, complete with insulators grouting bolts tripods, rack fittings ladder arrangements hylem sheet board of 10 mm thickness covering complete rack, all necessary fitting, support cable, and other accessories etc, as per drawing and technical specification and erection with scaffolding arrangement, fixing of tag blocks and all types of terminals on cable termination rack as per technical specification.
1
27927
27927.56
... More
Excavation of cable trench 1.2 mtr deep, 0.3 mtr wide at the bottom along the railway track in all type of soil(exccept rocky area), including cleaning of bushes tress, temporary obstruction bailing out water from the trench and refilling of the trench by excavated soil and ramming after laying of the required quantity of cables as per instruction of Engineer at site.
-
-
19
... More
Laying of Sig. cable of different sizes as per cable route plan in the already dug trenches with or without DWC pipe.
15000
3
54000
... More
Cutting of all types of pucca platforms surfaces, preparatory to trenching, trenching & refilling trench, 0.5m deep and restoration of the platform surface to original condition including laying of DWC pipe as per technical specifications. DWC pipes will be supplied by Railway.
200
384
76908
... More
All works of excavation of cable trench 1.0 mtr deep , 0.3 mtr wide on pucca 22 patform/on road for road crossing /under track for track crossing and restoration of the platform/Road surface/track to original condition with contractors material and then re-filling the trench as per TS (Supply of DWC/HDPE pipe is within the scope of work)
200
437
87430
... More
Boaring of S&T cables of pucca, road/track crossing and laying of cables through DWC pipe.
500
526
263440
... More
Taking the all types of cables inside station relay rooms, ASM's rooms, location boxes and junction boxes etc. and sealing of cable entry pit etc. as per Technical specifications, complete with contractor's material.
1
6614
6614.27
... More
Transportation of HDT machinewith accessories including handling of stores materials, preparation of site and boring for placing of 63 mm dia HDPE PIPE for crossing of 6 Quad and 33/40 mm dia HDPE PIPE for crossing of OFC cable together in one or more shotof suitable bore size at 25 bridges/ culverts / track/pucca road crossing.Boring trench shall be minimum 3(three) meter below the riverbed and 1 (one) meter below the track / road/ pucca road crossing area. This includes supply of accessories for pulling HDPE pipes if any, cost of fuel and all other items which will be required for laying of cable through it.Supply of HDPE pipe is covered in schedule .The work shall be executed as per technical specification. Boring upto the length of 150 Mtrs
900
1254
1128798
... More
Installation of Thermoshrik jointing kit for straight/derivation joint testing and commissioning of quad link.
5
631
3159.35
... More
Excavation, ramming, Casting Cement Concrete foundation for Apparatus cases/Location boxes in the ratio of 1:3:6 Aggregate not exceeding 3 : 8 cm, as per Drg. No. CSTE's Drg. No. and technical specifications using standard size galvanized Anchor bolts & nuts (also referred 27 to as foundation bolts) /CI foundation conforming to IRS Drg. No. SA-116A/M, for erection of Apparatus cases/Location boxes, plastering with 1 : 4 cement - sand mixture all the surfaces up to 75 mm below ground level, complete with contractor's material including cement, sand, stones, anchor bolts and nuts and curing of casted foundation, refilling & ramming of loose soil around foundation and disposal of loose dug soil from site. (a) Apparatus case (Full)
8
8815
70523.04
... More
Installation of Apparataus cases/Location Boxes on CC foundation on grouted bolts, including filling the space enclosed below the location box with contractor's sand, as per technical specifications.(a) Apparatus Case
8
4196
33569.68
... More
Termination of cables and supporting on string rod, with supply and providing identification tags/ferrules/tapes with letters on each cable conductor, as per technical specifications. (a) Apparatus Case
8
3451
27610.72
... More
Supply & fixing of hylam sheet 10 mm thick, of minimum grade P2, on apparatus case/Location boxes for wiring of signalling circuits and cable termination, fixing on suitable size 30 contractor's angle with string rod for supporting cable on back side, including fixing of all types of terminals/ fuses as per location diagram/plan and technical specifications, with drilling of holes on either sides of terminals/ fuses and other places as required for cable conductor / wires entry and fixing of sheet. (a) size 860 mm X 140 mm
8
2314
18518.08
... More
Cement concrete work for miscellaneous items in the ratio 1:3:6 aggregate not exceding 3:8 cm including excavation, ramming curing and plastering with 1:4 cement - sand mixture complete with contractors material including cement sand, aggregate and curing of casted foundation refiling & ramming of loose soil around foundation and disposal of loose dug soil from site (Per cubic 31 meter)
5
3239
16198.95
... More
Installation of complete Earthing and Bonding system as per code of practice RDSO/SPN/197/2008 or latest to construct earthing of less than 1 (one) ohm including auguring hole of 100-125 mm dia and minimum 2.8 meter depth for earth electrode, carrying out necessarry digging 32 work and to make 300X300X300 mm (inside dimension) concrete box with lid of approx 50 mm thickness and painted black on top, all with contractors material, fixing earth electrode in the augured hole. filling earthing enhancement material around earth electrode in the hole in slurry form and allowing to set, back filling of excavated soil after serving , measurement of earth value and all other work of earthing as per code of practice.
20
3500
70010.2
... More
Installation of earth electrode pipe as per technical specification. All required materials (3 meter long perforated G.I pipe size, 50 mm dia, charcoal, normal salt, earthing lead, nut & bolts etc to be supplied by contractor.
10
1617
16172.5
... More
Preparation of SWR literature in english alongwith associated mid-section interlocked gate with all corrections as per approved SWRD & approved SIP. For this all technical corrections, 34 editing, grammatical correction etc. are to be carried out and one rough print to be given to railways for approval before printing, as required for final processing of CRS sanction. This also includes preparation of maintenance cards in format provided by Rly. Inspection: Consignee Inspection charges: None Payment terms:100% after execution.
1
3706
3706.58
... More
Translation of Station Working Rules from english to hindi and framing out in DIGLOT 35 form (or similar software )as per extant Rly practice. The required SWR in english will be provided by the contractor and has been covered separately in item no. 1.21 of Chapter 1 of this SOR. Inspection: Consignee Inspection charges: None Payment terms:100% after execution. 36
1
4612
4612.53
... More
Making photocopies & binding of the SWR literature in English/Hindi/Diglot form as
4
183
735.52
... More
Preparation of SIP (Scale 1:1000), PD, RCC in AutoCAD as per standard format adopted in NFR. Softcopy in AutoCAD to be submitted with one print copies of each in pdf format. The scope of work includes subsequent modification and revision in SIP, PD, RCC till commissioning of projects.
-
-
50551.2
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%