North Eastern Handicrafts And Handlooms Development Corporation Limited Tender

Package : HTHP Dying machine

Multi Pot Dyeing Machine - 15 kg/pot; Vertical Pot - 2 No, - Mounted on a common table top, Material of Construction : SS-316 L, Self-sealing Rapid Locking Top Lid, Safety device which functions automatically after 0.25kg pressure builds in the dyeing vessel, Carrier for Loose Hanks – To accommodate 15 kg Eri Silk Hanks, Material of construction – SS 316 L, Complete with locking fly nut.Single Stage Turbo Pump - 3 Phase AC induction motor (IE -2) – 5 Hp/ 2800 rpm, Inverter Drive for varying the speed/flow of Turbo pump, MLR – Fully flooded - 1:6.5, With Air pad : 1:6, Dozing System – 2 No. - Vertical Tank of 20 % capacity of main Vessel made of SS 316, Injector Pump – 1 Hp/2800 Rpm, Inverter Drive for varying the speed/flow of Dozing pump, Electric Heating - 1 Set - 4 Kw x 3 No = 12 Kw Heating Load, MOC of Heaters: SS-316, Cooling Coil – 1 No - Suitable for Cooling, M.O.C : SS-316L Seamless Pipe; Control Valves pneumatically operated for Cooling, Vessel fill, Vessel drain, Overflow, De-Pressure, Dozing tank drain &Coupling System– 2 Set, Manifold fitted with solenoid valve with 24V DC coil for Cooling, Vessel fill, Vessel drain, Overflow, De-Pressure, Top lid safety device, Dozing tank drain &Coupling System – 2 Set, Spring Loaded Over Pressure Relief Valve – 2 No, Pressure Gauge – 4 No, Air-Pad system – 2 No, Air filter regulator – 1 Set, Water Level Sensor – 6 No, Proximity sensor – 2 No,Temperature Sensor – 4 No, Pressure switches – 4 No, Pneumatics Control Box– 1 Set, Table Top Frame, Power Control Panel with dyeing programmer. Beaker Dying Machine: Vertical Rectangular Cabinet, Made of AISI- SS- 304, Top Loading, 10 No. Beakers, Capacity 130 ml, Leakage proof, Pressure Sealing Lids, Tong Picker, Carrier For holding Beakers inside the cabinet, Mounted on the Shaft for forward/reverse rotation, Beaker Stand For holding 10 no. Beakers outside the cabinet, Modern, compact and practically designed machine frame, Temperature Sensor, Proximity Sensor, Reduction gearbox, Direct mounted, Laser aligned, fitted with Electric motor – 1/2 Hp-30 RPM, Heating By Electric Tubular heaters - 4 KW (2 KW x 2 No), Cooling Coil For cooling down the beaker temperature before unloading, Made of SS 316 seamless pipe, With Necessary valves & fittings, Power Control Panel with dyeing programmer. Hydro Extractor - 50 Kg; Perforated Basket – 1 No., Made of AISI- SS- 304, Outer Drum Top Lid, Top Lid, Inner Perforated Basket, Safety Covers, Base Frame, Direct Drive Operation, DBR, Limit Switch– 1 No, Electric Motor - 7.5 HP/1440 RPM, Power Control Panel.