North Eastern Electric Power Corporation Limited Tender
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
North Eastern Electric Power Corporation Limited - NEEPCO Tender
Civil And Construction
Civil Works Others
Electrical and Electronics
Electrical Works
Eprocure
Opening Date7 Jan 2023
Closing Date10 Feb 2023
Tender Amount₹ 25,13,23,555
Costs
EMD
₹ 47,48,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_NEEPC_138781_1Bid Award Id
ViewTender No
NIB No. 429 Dated 06.01.2023Tender Authority
North Eastern Electric Power Corporation Limited ViewPurchaser Address
-Website
http://https://neepco.co.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) Berger paint/ Asian Paint/ Dulax (ICI) paint/ Nerolac Paint/ Snowcem India Ltd.
2640.35
-
-
... More
15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On Rough Side a) In Cement Mortar 1:3
35.26
-
-
... More
Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.
1571.88
-
-
... More
Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after thoroughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.
-
-
-
... More
(a) Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).
6721.16
-
-
... More
Painting one coat (excluding priming coat) on previously painted steel and other metal surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i) Surfaces over 100mm in width or girth (b) High Gloss (Asian Paint/ Berger Paint/ ICI Paint/ J&N Paint/ Nerolac)
1580.58
-
-
... More
Providing and laying modified bituminous water proofing membrane system in roof, fosroc/ Dr. Fixit Torchshield P3160/Fosroc/polymod AP of Choksey chemicals, 3mm thick APP modified waterproofing membrane by torch on method using LPG torch flame after applying a coat of Bituminous primer Dr. Fixit Torchshield Primer/ Proofex Torchseal Primer @ 0.2Litre /sq.m. complete as specified and directed by the Department followed by :Supplying, providing, mixing and laying of concrete screed of average 75mm thick in proportion 1:2:4 (1cement : 2fine aggregate : 4coarse aggregate) (by volume) with 12mm and down well graded aggregates and admixed with a normal plasticizer like Dr. Fixit Pidiproof LW+/ conplast WL of fosroc chemicals/ La Hi Proof WL of La Green@ 0.3% by weight of cement after making the concrete fibre reinforced for reducing the effect of thermal expansion by mixing concrete with Recron 3S @ 1.25kg per bag of cement and/ as specified and directed by the Department.
1700.61
-
-
... More
Demolishing RB work/ glassbrick works including stacking of steel bars and disposal of unserviceable material as directed for all levels.
67.21
-
-
... More
Steel work welded in built up sections, framed work including cutting, hoisting and fixing in positions and applying priming coat of red-lead paint including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed. (a) In Beams and Joists with connecting Plates/ angled Cleat
41.33
-
-
... More
Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i) Surfaces over 100mm in width or girth (b) High Gloss (Asian Paint/ Berger Paint/ ICI Paint/ J&N Paint/ Nerolac)
209.28
-
-
... More
Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi-rigid, inorganic, non-combustible fibre glass wool insulation 50mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non-woven fibre glass tissue of nominal thickness 0.5mm and nominal mass not less than 60gm/sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including 1.5mm thick solid aluminium sheet backing using 6mm thick cement board including SS rivets, nuts, bolts, washers, etc. complete.
336.05
-
-
... More
Providing and supplying Spandrel Glass panels comprising of 6mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface# 2 of approved colour and shade so as to match the colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. all complete for the required performances as specified, as per the Architectural Drawings, as per the approved shop drawings, as specified, and as directed by the Engineer-in-Charge.
336.05
-
-
... More
15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. (A) On Rough Side (a) In Cement Mortar 1:3
203.04
-
-
... More
Demolishing mosaic floor of various thickness, both mosaic tiles and cast-in-situ type including CC base course and removal of debris as directed for all levels.
3378.85
-
-
... More
Kota-stone slab flooring of 18 mm thick over 20mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 550mm x 550mm
1689.43
-
-
... More
Kota stone slab of 18 mm thick in riser of steps, skirting, dado and pillars laid with 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete. 550mm x 550mm
75.71
-
-
... More
Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement: 3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf)/ white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). (ii) Executive Quality (i) With Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)
1756.14
-
-
... More
Providing Vitrified floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) Bonzer7, Somany, Vermora, Kajaria, Orient Bell, Nitco, Johnson, Oasis, Marbito, AGL make. Double Charge/ PVT/ DVT 800mm x 800mm
644
-
-
... More
Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. (Johnson, Orient Bell, Nitco, AGL, Somany, Vermora make). Vitrified
GVT MATT FINISH (Sizes 600mm x 600mm and above)
66.2
-
-
... More
Providing ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).Somany, Bonzer7, Nitco, Marbito, Orient Bell, AGL, Varmora, Jhonson, Kajaria, Bajaj make.
Deluxe Range 300mm x 600mm
94.2
-
-
... More
Providing Vitrified floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) Bonzer7, Somany, Vermora, Kajaria, Orient Bell, Nitco, Johnson, Oasis, Marbito , AGL make. Anti-Static Tiles (Johnson or equivalent make) 600mm x 600mm
103
-
-
... More
Providing and laying plain/reinforced cement concrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately). (I) Using Mixer Machine (A) In Substructure upto Plinth Level
-
-
-
... More
Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. (N) Without using admixture, plasticiser (a) M15 Grade Concrete or Prop. 1:2:4
167.09
-
-
... More
Suppling, fitting and fixing of Satin finished Stainless Steel Grade 304 railing comprising of Baluster in 38 mm Dia. and 110 x 60 mm Base Plate with provision of holes and Mid Rails of dia 25 mm and 13 mm. The hand rail of 50 mm Dia to be installed to the Baluster using SS Screws at 50mm Center distance. The average distance between 2 balusters should be 900 mm and the height of railing is 840 mm. Complete as per manufacturers specification and direction by the Department. Railing System using Godrej 9381
144.16
-
-
... More
Providing, fitting and fixing aluminium hollow section of size 63.50mm x 38.10mm x 2.5mm thick for aluminium frame partition wall of approved brands, with frames of a maximum spacing of frame 1.20m joints mitred and jointed with SS screws (manufactured to relevant I.S. specification) and providing and fitting angle cleat, rubber gasket, bolting device screws etc. at all levels. (Glazing and Pre laminated board to be measured and paid separately). (i) In Normal Anodised Aluminium Section
451.52
-
-
... More
Providing, fitting and fixing Glazing and Pre laminated board of specified thickness for Aluminium and UPVC works on windows, doors, partition walls, curtain wall etc. as specified and directed by the department at all levels. Toughened Glass 6mm Thick
225.76
-
-
... More
Providing, fitting and fixing Glazing and Pre laminated board of specified thickness for Aluminium and UPVC works on windows, doors, partition walls, curtain wall etc. as specified and directed by the department at all levels. Particle Board (Nepal/ Bhutan Board) 12mm Thick
225.76
-
-
... More
Providing, fitting and fixing aluminium framed single or double leaf glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section of approved brand of approved brands with door style of size 85mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock
rails 100mm x 45mm x 2mm and bottom rails 115mm x 45mm x 2.5mm fitted with glazing clip, special EPDM rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels. (Glazing and Pre laminated board to be measured and paid separately).
-
-
-
... More
Single Leaf Door In Normal Anodised Aluminium Section
8.27
-
-
... More
Double Leaf Door In Normal Anodised Aluminium Section
36.15
-
-
... More
Providing, fitting and fixing Glazing and Pre laminated board of specified thickness for Aluminium and UPVC works on windows, doors, partition walls, curtain wall etc. as specified and directed by the department at all levels. Toughened Glass 6mm Thick
22.21
-
-
... More
Providing, fitting and fixing Glazing and Pre laminated board of specified thickness for Aluminium and UPVC works on windows, doors, partition walls, curtain wall etc. as specified and directed by the department at all levels.
Particle Board (Nepal/ Bhutan Board) 12mm Thick
22.21
-
-
... More
Providing, fitting and fixing standard aluminium openable windows and ventilators of approved brands without horizontal glazing bars joints mitred and jointed with SS screws (manufactured to IS: 733 and IS: 1285 specifications), fastened by 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix providing and fixing EPDM rubber, handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as per approved design and directed for all levels. (Glazing and Cement concrete to be measured and paid separately). 34mm Series Z sections and other sections (with minimum thickness 1.9 mm) a) Side hung and Top hung windows and ventilators i) Normal Anodised Aluminium
1.47
-
-
... More
Providing, fitting and fixing Glazing and Pre laminated board of specified thickness for Aluminium and UPVC works on windows, doors, partition walls, curtain wall etc. as specified and directed by the department at all levels.
Toughened Glass 6mm Thick
1.47
-
-
... More
Providing, fitting and fixing PVC door frame Duraplast make DPF-5060 make suitable for DPS-3720 made from extruded PVC multichamber hollow section having dimensions of 50mmx60mm (Tolerance + 1mm). Horizontal and vertical sections shall be joined by steel screws after inserting M.S. tubular rectangular galvanised L-shaped brackets of size 100mmx100mm or plastic brackets of size 75mmx75mm with metred cut at the corners. Hinge side of the frame shall be reinforced with M.S. Tubular section of size 40mmx20mm. The frame will be fixed to the column/ stiffener/ wall with the help of 3 nos 75mm long and 4mm dia steel screws and expandable fasteners on each side of the door frame complete in all respects as specified and directed at all levels.
24.7
-
-
... More
Providing, fitting and fixing PVC Door shutters of Duraplast DPS-3720 make made from extruded PVC stiles and rails made from rigid PVC multicavity hollow chamber section of size 90mmx37mm (Tolerance+ 1mm). The corners of the stiles and rails shall be metred out and fixed to each other with the help of solid plastic L-shaped brackets or M.S. rectangular tubular galvanised two nos of size 200mmx100mm and 100mmx100mm at each corner by self tapping steel screws. PVC multicavity hollow section of size 105mmx37mm shall be fixed in the middle by aluminium cleat and steel screws as lock rail. The section frame shall then be filled with PVC panels of approved colour of size 100mmx20mm. Then two numbers of bright steel rods of 6mm diameter shall be inserted horizontally through stiles and panels with two numbers of checknuts and washers all complete as specified and directed at all levels.
6.45
-
-
... More
Providing and fixing rolling shutters of Dura Ultima or equivalent manufactured with light weight non corrosive high tensile strength galvalume colour coated sheets with aluminium bottom rail with combination of drum and precision spring assisted spindle assembly to make the roller door easy to open and close and ensuring consistent balance. Arrangements for inside and outside locking as directed and complete.
90
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. Pan with ISI marked black solid plastic seat and lid
4
-
-
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: Range of three half stall urinals with 10 litre PVC automatic flushing cistern
2
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:
(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
4
-
-
... More
Providing and fixing 8 mm dia CP/ SS Jet with flexible tube upto 1 metre long with SS triangular plate to European type W.C. of quality and make as approved by Engineer-in-Charge.
4
-
-
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
10
-
-
... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia
2
-
-
... More
Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. Flexible Pipe 32mm dia.
10
-
-
... More
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with CP Brass screws and washers complete.
4
-
-
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with CP Brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
4
-
-
... More
Providing and fixing toilet paper holder: Vitreous China
4
-
-
... More
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms
10
-
-
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
10
-
-
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
4
-
-
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
8
-
-
... More
Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.
4
-
-
... More
Providing and fixing PTMT Urinal cock of approved quality and colour. 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms
6
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal Work- Exposed on Wall
-
-
-
... More
15mm Nominal Dia. Pipes
100
-
-
... More
20mm Nominal Dia Pipes
100
-
-
... More
25mm Nominal Dia Pipes
100
-
-
... More
32mm Nominal Dia Pipes
100
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
-
-
-
... More
15mm Nominal Dia. Pipes
200
-
-
... More
20mm Nominal Dia Pipes
200
-
-
... More
25mm Nominal Dia Pipes
200
-
-
... More
32mm Nominal Dia Pipes
200
-
-
... More
50mm Nominal Dia Pipes
200
-
-
... More
100mm Nominal Dia Pipes
200
-
-
... More
150mm Nominal Dia Pipes
200
-
-
... More
Providing and fixing CP Brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore
8
-
-
... More
Providing and fixing CP Brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore
10
-
-
... More
Providing and fixing CP Brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
15 mm nominal bore
5
-
-
... More
Providing and fixing CP Brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore
5
-
-
... More
Providing and fixing CP Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
5
-
-
... More
Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gms each
5
-
-
... More
Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms each
5
-
-
... More
Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 107 mm long, weighing not less than 110 gms each
5
-
-
... More
Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 98 mm long, weighing not less than 75 gms each
5
-
-
... More
Providing and fixing PTMT grating of approved quality and colour. Circular type
-
-
-
... More
100 mm Nominal Dia.
5
-
-
... More
125 mm Nominal Dia. with 25 mm Waste Hole each.
5
-
-
... More
Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms each.
5
-
-
... More
18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms each
5
-
-
... More
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.
15 mm nominal bore, weighing not less than 32 gms each
5
-
-
... More
Providing and fixing unplasticised PVC connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 30cm length each
5
-
-
... More
Dismantling of Designated Portion in existing concrete in Floors/Walls/Beams, etc. including cutting of Block-Outs, Groove Cutting, etc. in Power House or any other areas as directed by the Engineer-in-Charge with Core Cutting/Wall Saw/Wire Saw/any other suitable equipment, whichever applicable, including all labour, materials, equipments and services for successful completion of the works as shown in the construction drawings, as per the technical specification or as directed by the Engineer-in-Charge.
39
-
-
... More
Steel work welded in built up sections, framed work including cutting, hoisting and fixing in positions and applying priming coat of red-lead paint including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed. In beams and joists with connecting plates/ angled cleat.
100
-
-
... More
Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. TATA make Circular Hollow section- CHS of Grade YST310 conforming to I.S. Specification : 1161-1998
100
-
-
... More
Providing colour coated zinc-aluminium profile sheet manufactured out of Hi-strength steel of min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 43.5% Zinc and 1.5% Silicon) as per AS 1397 – Zincalume® AZ150 (Min. 150 gms/sq.mt total on both sides) with Type-4 Super Durable Polyester (SDP) Colorbond XRW paint system having highest SRI (Thermatech/ Cooling system) as per Class 3 of AS/NZS 2728 & IS15965:2012. The paint shall have a total coating thickness of nominal 35 µm, comprising of nominal 20 µm exterior coat on top surface and nominal 5 µm reverse coat on back surface over nominal 5µm primer coat on both surfaces of approved colour shade. The sheet shall be of nominal 1015mm effective cover width and nominal 28mm deep ribs with subtle square fluting in the five pan at nominal 203mm centre-to-centre including self drilling screw fasteners of 25um zinc/tin alloy or 40 um zinc coating comply to AS3566 -2002, fitting and fixing complete. (Roof trusses, purlins etc. to be measured and paid separately.) 0.45 mm Total Painted Thickness (TPT)
500
-
-
... More
Providing PPGL accessories (Ridges / Valley / Gutter / Flashing) made of colorbond xrw steel as per IS: 15965 SDP paint of type 4 (at all levels including fitting and fixing self drilling, self tapping screws complete as per roofing specification. 0.45 mm Total Painted Thickness (TPT)
50
-
-
... More
RENOVATION OF TAIL RACE CHANNEL OF KHANDONG POWER STATION
-
-
-
... More
Cutting and clearing bushes consisting of plants and all sorts of bamboos including uprooting and removing as necessary and filling up the holes with earth, dressing, ramming etc. complete.
6000
-
-
... More
Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (b) In hard/ dense soil
371.25
-
-
... More
Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1 cement: 3 sand : 6 coarse aggregate by volume
28.5
-
-
... More
Stone masonry work in retaining wall, wing wall, abutment, foundation, steps, plinth etc. in cement mortar in prop 1:6 with levelling course of 1:6:12 with both faces hammer dressed including bonding, providing face stone, through stone and centering including racking of joints, curing and supplying and all carriage of stone as directed including payment of forest royalty and sales tax and carriage. (b) Coarse Rubble Masonry
332.5
-
-
... More
Providing and laying plain/reinforced cement concrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) Without using admixture, plasticiser Using Mixer Machine In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. M20 grade concrete or Prop. 1:1.5:3
412.5
-
-
... More
Extra for using plasticiser (Masterplast PL-1@ 0.20 Litre per bag of cement/SPL-2 @ 0.15 Lit per bag of cement or equivalent), air entraining and water reducing plasticiser (Masterplast PAE @ 0.15Lit per bag of cement or equivalent) conforming to IS-9103-1999 for the above Item
M20 grade concrete or Prop. 1:1.5:3
412.5
-
-
... More
Providing formwork using 2 mm pressed shuttering plate of mild sheet and tubular telescopic steel props including centering, shuttering, strutting and propping etc. complete and removal of the same for in situ reinforced concrete and plain concrete work in: Vertical surfaces
1035.5
-
-
... More
Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and technical specifications.
643.91
-
-
... More
Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and technical specifications.
1663.62
-
-
... More
CIVIL WORKS FOR REPLACEMENT OF EXISTING PENSTOCK & PROVIDING STEEL IN-LINERS IN THE PENSTOCK/HPT FEEDING TWO UNITS
-
-
-
... More
Installation of injection system for epoxy grout/ non- shrink grout: Installation of non-returnable Packers fixed at required interval including drilling of holes upto a depth of approx. 1/3rd depth of the concrete thickness using a heavy duty drill machine, cleaning of holes, fixing of packers with structural mortar or epoxy mortar, etc. complete in all respect including all materials, labours, tools & plants, etc. as per the technical specification or as directed by the Engineer-in-Charge.
320
-
-
... More
Drilling:
Percussion drilling at designated areas as shown in the construction drawings or as directed by the Engineer-in-Charge including casing, driving and permeability tests progressively complete in all respect with all labours, materials, plant, equipments, etc. as per technical specification given, drawing and as directed by the Engineer-in-Charge. Drilling of holes upto 48mm dia
50
-
-
... More
Cement Grouting: Cement Grouting including supply of all materials like cement, sand, admixture, etc.) which are not specifically mentioned but required to complete the job), water testing of holes including supply of all required apparatus complete, labours, plants and equipments, etc. in all respect as per technical specification and as directed by the Engineer-in-Charge.
200
-
-
... More
Sand required for Grouting.
10
-
-
... More
Application of Epoxy Grout: Application of low viscous, high swelling, thermosetting epoxy grout with hardener solution through already fixed non-returnable packers along the cracks/ construction joints using medium to high pressure special injection pumps. The mixing should be done as per the manufacturer's specification and using specialized applicator. The amount of hardener per litre depends on the required pot life at present ambient temperature, the epoxy hardener shall be mixed until the colour gets uniform and application shall be carried out within the pot life. Complete in all respect with all materials, labours, tools & plants, etc. as per the technical specification or as directed by the Engineer-in-Charge.
100
-
-
... More
Supplying, mixing and applying an Epoxy resin based bonding agent of reputed make for proper bond of old to new concrete.
1000
-
-
... More
Non- Shrink Grouting: Providing & injecting approved grout in proportion recommended by the manufacturer at location as directed by the Engineer-in-Charge by suitable gun/pump at required pressure including cutting of nipples after curing, etc. complete as per the technical specification or as directed by the Engineer-in-Charge. Stirred mixed non shrink cementitious grout of approved make
200000
-
-
... More
RENOVATION & REPAIR OF KHANDONG DAM
-
-
-
... More
Chipping, dismantling of existing damaged concrete liner surface of dam, cleaning for concreting in all respect including all tools, plants, labour materials etc. as per the technical specification, construction drawing, and as directed by the Engineer-in-Charge.
226.65
-
-
... More
Supplying, mixing and applying an Epoxy resin based bonding agent of reputed make for proper bond of old to new concrete.
226
-
-
... More
Concrete complete in all respect with all tools, plants, labour, materials all lead and lift as per the technical specification, construction drawing and as directed as directed by the Engineer-in-Charge. Concrete of M-30 grade including form work of spillway of dam
33.9
-
-
... More
Inspection, identification of wall & lift joints, surface preparation including chipping of required depth for treatment of lift joints, cleaning all dirts & dust with compressed air and water for high strength epoxy mortar including scaffolding, working platform alongwith all lift and lead at all level.
6102
-
-
... More
Inspection, identification of patches on wall, concrete surface requiring treatment other than the lift joint and preparation patches for suitable treatment, including chipping of required depth for treatment of patches, cleaning all dirts & dust with compressed air and water for high strength Epoxy mortar including scaffolding, working platform etc. alongwith all lift and lead at all level.
16908.33
-
-
... More
Inspection, identification and drilling of required depth and diameter and fixing nipples for grouting.
-
-
-
... More
Upto 500 mm long holes.
744
-
-
... More
Upto 900 mm long holes.
744
-
-
... More
Surface treatment with high strength Epoxy Mortar which is suitable for application in wet condition and capable of withstanding the flow of seepage water.
-
-
-
... More
Lift Joints
7709.9
-
-
... More
Patches on walls, concrete surface, etc.
2561
-
-
... More
Application of Epoxy Grout: Application of low viscous, high swelling, thermosetting epoxy grout with hardener solution through already fixed non-returnable packers along the cracks/ construction joints using medium to high pressure special injection pumps. The mixing should be done as per the manufacturer's specification and using specialized applicator. The amount of hardener per litre depends on the required pot life at present ambient temperature, the epoxy hardener shall be mixed until the colour gets uniform and application shall be carried out within the pot life. Complete in all respect with all materials, labours, tools & plants, etc. as per the technical specification or as directed by the Engineer-in-Charge.
1000
-
-
... More
Non- Shrink Grouting: Providing & injecting approved grout in proportion recommended by the manufacturer at location as directed by the Engineer-in-Charge by suitable gun/pump at required pressure including cutting of nipples after curing, etc. complete as per the technical specification or as directed by the Engineer-in-Charge. Stirred mixed non shrink cementitious grout of approved make
2000
-
-
... More
Providing applying "XYPEX" concrete water proofing & durability Enhancement by crystalization to be supported by at least 2(two) international Test reports showing clear scanning Electron microscopic (SEM) photograph of desified and mature crystal formint to plug all capillary tracks and pores of the concrete permanently and permeability test aa par IS 2720 conducted by CBRI. The concrete should not absorb water more than a.5 grains and not more than 1mm from the concrete surface. The product to be listed in ICC-ES- EVELUATION REPORT INDEX January2009. The treatment to be carried out on the concrete surface as per manufacturers specification.
6346.22
-
-
... More
ADDITIONAL WORK ALONG THE PENSTOCK ALIGNMENT FROM ANCHOR BLOCK -02 TO ANCHOR BLOCK -03
-
-
-
... More
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge: All kinds of soil
2652
-
-
... More
Cleaning of Debris along Penstock Alignment Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
4428
-
-
... More
Cost of haulage excluding loading & unloading for removal of dismantled concrete pieces: Katcha Track beyond the initial lead of 50m (Lead = 2.0 km)
2214
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
4722
-
-
... More
1:3:6 (1 Cement: 3 coarse sand (Zone-III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources).
886.5
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement. All work up to plinth level: 1:1.5:3 (1 cement: 1.5 coarse sand (Zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources)
109
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement: 1.5 coarse sand (Zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources)
75
-
-
... More
Dismantling of damaged/displaced Saddle Blocks: Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.
75
-
-
... More
Reinforcement in Saddle Support Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Hot rolled deformed bars
2.26
-
-
... More
Steel reinforcement as Dowels: Steel reinforcement including straightening, cutting, bending, placing in position and binding all complete. Hot rolled deformed bars
0.56
-
-
... More
Drilling for Contact Grouting: Percussion drilling at designated areas as shown in the construction drawings or as directed by the Engineer-in-Charge including casing, driving and permeability tests progressively complete in all respect with all labours, materials, plant, equipments, etc. as per technical specification given, drawing and as directed by the Engineer-in-Charge. Drilling of holes upto 48mm dia
156
-
-
... More
Drilling for Consolidation Grouting: Percussion drilling at designated areas as shown in the construction drawings or as directed by the Engineer-in-Charge including casing, driving and permeability tests progressively complete in all respect with all labours, materials, plant, equipments, etc. as per technical specification given, drawing and as directed by the Engineer-in-Charge. Drilling of holes upto 48mm dia
312
-
-
... More
Cement Grouting: Cement Grouting including supply of all materials like cement, sand, admixture, etc.) which are not specifically mentioned but required to complete the job), water testing of holes including supply of all required apparatus complete, labours, plants and equipments, etc. in all respect as per technical specification and as directed by the Engineer-in-Charge.
3588
-
-
... More
Sand required for Grouting.
1000
-
-
... More
Form Work: Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete
126.11
-
-
... More
ADDITIONAL WORK FOR RE-CONSTRUCTION OF THE VALVE HOUSE
-
-
-
... More
Earth Filling: Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
2287.98
-
-
... More
Cost of haulage of earth excluding loading & unloading: Katcha Track beyond the initial lead of 50m (Lead = 2.0 km).
4748
-
-
... More
Loading of earth, sand, moorum, manure, fly ash by mechanical means including a lead upto 30 M.
2287.98
-
-
... More
Unloading of Earth, Sand, Lime, Moorum, Aggregate, Stone Boulder, Brick Aggregate, Kankar, Building Rubbish, Manure, Crushed Slag, Flyash, Stone for Masonry Work by mechanical means.
2287.98
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:
1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources).
2
-
-
... More
Plain Cement Concrete complete as per Drawings & technical Specification including Steel Shuttering Formwork. Without Plasticiser PCC Grade M20
60
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement. All work up to plinth level: 1:1.5:3 (1 cement: 1.5 coarse sand (Zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources)
301
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and
reinforcement: 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources)
33
-
-
... More
Reinforcement in Valve House: Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Hot rolled deformed bars
38
-
-
... More
Dismantling of existing Valve House: Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.
644
-
-
... More
Kota Stone Flooring: Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement: 4 coarse sand): 25 mm thick
286.11
-
-
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
18.5
-
-
... More
Half brick masonry with common burnt clay FPS (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor-V level. Cement Mortar 1:3 (1 cement: 3 coarse sand)
55.5
-
-
... More
Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement: 6 coarse sand): With FPS (non modular) bricks
53.58
-
-
... More
External Plastering: 15 mm cement plaster on the rough side of single or half brick wall of mix: 1:4 (1 cement: 4 fine sand)
330.4
-
-
... More
Inside Plastering: 12 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand)
324.4
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
654.8
-
-
... More
External Painting: Finishing walls with water proofing cement paint of required shade:
New work (Two or more coats applied @ 3.84 kg/10 sqm).
330.4
-
-
... More
Inside Painting: Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications:
Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm.
324.4
-
-
... More
Providing and fixing rolling shutters of Dura Ultima or equivalent manufactured with light weight non corrosive high tensile strength galvalume colour coated sheets with aluminium bottom rail with combination of drum and precision spring assisted spindle assembly to make the roller door easy to open and close and ensuring consistent balance. Arrangements for inside and outside locking as directed and complete.
56.25
-
-
... More
Providing, fitting and fixing aluminium framed single or double leaf glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section of approved brand of approved brands with door style of size 85mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails 115mm x 45mm x 2.5mm fitted with glazing clip, special EPDM rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels. (Glazing and Pre laminated board to be measured and paid separately).
-
-
-
... More
Single Leaf Door In Normal Anodised Aluminium Section
5
-
-
... More
Double Leaf Door In Normal Anodised Aluminium Section
5
-
-
... More
Providing, fitting and fixing Glazing and Pre laminated board of specified thickness for Aluminium and UPVC works on windows, doors, partition walls, curtain wall etc. as specified and directed by the department at all levels. Toughened Glass 6mm Thick
10
-
-
... More
Providing, fitting and fixing Glazing and Pre laminated board of specified thickness for Aluminium and UPVC works on windows, doors, partition walls, curtain wall etc. as specified and directed by the department at all levels. Particle Board (Nepal/ Bhutan Board) 12mm Thick
10
-
-
... More
Providing, fitting and fixing standard aluminium openable windows and ventilators of approved brands without horizontal glazing bars joints mitred and jointed with SS screws (manufactured to IS: 733 and IS: 1285 specifications), fastened by 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix providing and fixing EPDM rubber, handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as per approved design and directed for all levels. (Glazing and Cement concrete to be measured and paid separately). 34mm Series Z sections and other sections (with minimum thickness 1.9 mm) a) Side hung and Top hung windows and ventilators
i) Normal Anodised Aluminium
13
-
-
... More
Providing, fitting and fixing Glazing and Pre laminated board of specified thickness for Aluminium and UPVC works on windows, doors, partition walls, curtain wall etc. as specified and directed by the department at all levels. Toughened Glass 6mm Thick
18
-
-
... More
Formwork: Centering and shuttering including strutting, propping etc. and removal of form work for: Columns, piers, abutments, pillars, posts and struts
558
-
-
... More
Form Work: Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete
76
-
-
... More
Steel work welded in built up sections, framed work including cutting, hoisting and fixing in positions and applying priming coat of red-lead paint including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed. In beams and joists with connecting plates/ angled cleat.
230
-
-
... More
Providing colour coated zinc-aluminium profile sheet manufactured out of Hi-strength steel of min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 43.5% Zinc and 1.5% Silicon) as per AS 1397 – Zincalume® AZ150 (Min. 150 gms/sq.mt total on both sides) with Type-4 Super Durable Polyester (SDP) Colorbond XRW paint system having highest SRI (Thermatech/ Cooling system) as per Class 3 of AS/NZS 2728 & IS15965:2012. The paint shall have a total coating thickness of nominal 35 µm, comprising of nominal 20 µm exterior coat on top surface and nominal 5 µm reverse coat on back surface over nominal 5µm primer coat on both surfaces of approved colour shade. The sheet shall be of nominal 1015mm effective cover width and nominal 28mm deep ribs with subtle square fluting in the five pan at nominal 203mm centre-to-centre including self drilling screw fasteners of 25um zinc/tin alloy or 40 um zinc coating comply to AS3566 -2002, fitting and fixing complete. (Roof trusses, purlins etc. to be measured and paid separately). 0.45 mm Total Painted Thickness (TPT)
759
-
-
... More
Providing PPGL accessories (Ridges / Valley / Gutter / Flashing) made of colorbond xrw steel as per IS: 15965 SDP paint of type 4 (at all levels including fitting and fixing self drilling, self tapping screws complete as per roofing specification. 0.45 mm Total Painted Thickness (TPT)
103
-
-
... More
ADDITIONAL WORK FOR RE-CONSTRUCTION OF THE Y-PIECE
-
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement. All work up to plinth level: 1:1.5:3 (1 cement: 1.5 coarse sand (Zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources)
726
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources)
2577
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources)
351.64
-
-
... More
Plain Cement Concrete complete as per Drawings & technical Specification including Steel Shuttering Formwork.
Without Plasticiser PCC Grade M20
120
-
-
... More
Reinforcement in Y-Piece Area Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Hot rolled deformed bars
69.35
-
-
... More
Steel reinforcement as Dowels: Steel reinforcement including straightening, cutting, bending, placing in position and binding all complete. Hot rolled deformed bars
6
-
-
... More
Drilling & Fixing of Steel Rebars as Dowels: Providing, Placing and fixing in position Chemical rebar fasteners including drilling of holes of specified size and depths upto 250mm into the old concrete, cleaning holes, placing chemicals inside the holes and fixing reinforcement bars all complete as per specification or as directed by the Engineer-in-Charge in locations indicated in the Construction Drawings. 20mm dia re-bar fasteners
4509
-
-
... More
Dismantling of existing Y- Piece: Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.
608
-
-
... More
Removal of Existing Steel Liners from Y-Piece: Removal of Existing Steel Liners in Y-Piece including cutting, dismantling, loading, transportation, unloading & stacking in the Umrongso Store, complete in all respect, including all tools & plants, labour, equipments, etc. as per the technical specification and as directed by the Engineer-in-Charge.
88
-
-
... More
Earth Filling: Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
12447
-
-
... More
Cost of haulage of earth excluding loading & unloading: Katcha Track beyond the initial lead of 50m (Lead = 2.0 km).
24894
-
-
... More
Loading of earth, sand, moorum, manure, fly ash by mechanical means including a lead upto 30 M.
12447
-
-
... More
Unloading of Earth, Sand, Lime, Moorum, Aggregate, Stone Boulder, Brick Aggregate, Kankar, Building Rubbish, Manure, Crushed Slag, Flyash, Stone for Masonry Work by mechanical means.
12447
-
-
... More
Drilling:
Percussion drilling at designated areas as shown in the construction drawings or as directed by the Engineer-in-Charge including casing, driving and permeability tests progressively complete in all respect with all labours, materials, plant, equipments, etc. as per technical specification given, drawing and as directed by the Engineer-in-Charge. Drilling of holes upto 48mm dia
1294
-
-
... More
Cement Grouting: Cement Grouting including supply of all materials like cement, sand, admixture, etc.) which are not specifically mentioned but required to complete the job), water testing of holes including supply of all required apparatus complete, labours, plants and equipments, etc. in all respect as per technical specification and as directed by the Engineer-in-Charge.
12940
-
-
... More
Sand required for Grouting.
1000
-
-
... More
Formwork: Centering and shuttering including strutting, propping etc. and removal of form work for: Columns, piers, abutments, pillars, posts and struts
519.75
-
-
... More
Form Work: Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete
281
-
-
... More
Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and technical specifications.
1950
-
-
... More
ADDITIONAL WORKS RELATED TO ROAD WORKS
-
-
-
... More
Preparation and Consolidation of Subgrade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5cm depth, dressing to camber and consolidating with road roller including making good the undulations, etc. and re-rolling the sub-grade and disposal of surplus earth with lead upto 50m.
3240
-
-
... More
Supplying and stacking at site.
-
-
-
... More
90mm to 45mm size stone aggregate.
81
-
-
... More
63mm to 45mm size stone aggregate.
81
-
-
... More
53mm to 22.4mm size stone aggregate.
81
-
-
... More
Stone Screening 13.2mm nominal size (Type A).
90
-
-
... More
Stone Screening 11.2mm nominal size (Type B).
90
-
-
... More
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8 to 10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.
243
-
-
... More
Supplying, stacking and spreading 6mm thick red bajri, watering and rolling complete including preparation of the surface rolling with Road Roller/ Hand Roller.
3240
-
-
... More
Surface dressing one coat on new surface with bitumen of specified grade at a rate of 1.95 kg/sqm of surface area with 1.5 cum of stone chippings 13.2mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity, etc. complete. Using Bitumen Emulsion (Minimum 50% Bitumen Content- RS Grade conforming to IS: 8887).
2700
-
-
... More
Surface dressing one coat on old surface with Bitumen of specified grade at the rate of 1.22 kg/sqm of surface area with 1.10 Cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity, etc. complete.
Using Bitumen Emulsion (Minimum 50% Bitumen content- RS Grade conforming to IS: 8887).
1800
-
-
... More
Providing and laying bitumen mastic wearing course (as per specification) with industrial bitumen of grade 85/25 conforming to IS: 702, prepared by using cooker and laid to required level and slope, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of approved size at the rate pf 0.005 cum per 10 sqm and at approximate spacing of 10cm centre to centre in both directions, pressed into surface protruding 1mm to 4mm over mastic surface, including cleaning of surface, removal of debris, etc. all complete. (Considering Bitumen using 10.2% as per MoRTH specification):
40mm Thick
4500
-
-
... More
Providing and applying tack coat using hot straight run bitumen of grade VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications:
On bituminous surface @ 0.50 kg/sqm
4500
-
-
... More
2.5cm premix carpet surfacing with 3.0 cum of stone chippings 11.2mm nominal size per 100 sqm and bitumen emulsion (medium setting min. 65% bitumen contents) complying with IS: 8887, using 96 kg per Cum of chippings of road surface, including consolidation with road roller, etc. complete.
4500
-
-
... More
Providing and laying seal coat of pre-mixed fine aggregate (passing 2.36mm and retained on 180 micron sieve) with Bitumen using 128kg of Bitumen of Grade VG-10 Bitumen per cum of fine aggregate and 0.60 cum aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete.
4500
-
-
... More
Concrete Pavements:
-
-
-
... More
Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 graded stone aggregate 40mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tampering complete.
50
-
-
... More
Providing & fixing in position pre-moulded joint filler in expansion joints
5000
-
-
... More
Providing and laying in position bitumen hot sealing compound for expansion joint, etc. Using Grade "A" sealing compound
5000
-
-
... More
Fencing Work:
-
-
-
... More
Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires of barbed wire weighing 9.38 kg per 100m (min.), between the two posts fitted & fixed with GI staples, turn buckles, etc. complete. (Cost of Posts, Struts, earth work and concrete work to be paid separately). Payment to be made per meter cost of total length of barbed wire used. Wire GI Barbed Wire
100
-
-
... More
Supplying at site angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10cm length and drilling holes upto 10mm dia. etc. complete.
500
-
-
... More
MISCELLENEOUS WORKS
-
-
-
... More
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest amendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation, testing and commissioning.
-
-
-
... More
HDPE Grade PE80-PN6.0, 315mm dia.
480
-
-
... More
HDPE Grade PE80-PN6.0, 450mm dia.
240
-
-
... More
Supplying, testing and installation of 100cm wide woven jute geotextiles(JGT) 627 gm/sq.m possessing tensile strength of 20kn/m (+10%,-5% tolerance) with a porometry around 150 to 400 microns and thickness 2 mm for application in river bank protection work. Jute fabric to be laid with overlaps of 100mm crosswise and 300 mm longitudinally duly secured by U shaped MS staples (11 gauge)/ round head country nail of 150mm length at an interval of 750mm as per direction of the Engineer-in-Charge).
2659.5
-
-
... More
Piling Works
-
-
-
... More
Bored Cast-in-Situ M35 Grade RCC Pile excluding reinforcement completed as per drawing as technical specifications and removal of excavated earth with all lifts and lead upto 1000m including providing plasticiser (Masterplast PL-1/SPL-2 or equivalent), air entraining and water reducing plasticiser (Masterplast PAE or equivalent) and accelerating plastciser (Masterplast ACPL or equivalent) conforming to IS: 9103-1999. Pile Diameter 750mm
120
-
-
... More
Empty boring for specified diameter piles from ground level to cut-off level. Pile Dia 750 mm
100
-
-
... More
Providing and laying plain/reinforced cement concrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work. Without using admixture, plasticiser Using Mixer Machine M25 grade concrete or Prop. 1:1:2
44.18
-
-
... More
Extra for using plasticiser (Masterplast PL-1@ 0.20 Litre per bag of cement/SPL-2 @ 0.15 Lit per bag of cement or equivalent), air entraining and water reducing plasticiser (Masterplast PAE @ 0.15Lit per bag of cement or equivalent) conforming to IS-9103-1999.
M25 grade concrete Prop 1:1:2
44.18
-
-
... More
Reinforcement
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto Cut-Off level. Hot rolled deformed bars
8
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements