North East Frontier Railway Tender
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
North East Frontier Railway - NFR Tender
Machinery and Tools
GEM
Opening Date4 Feb 2025
Closing Date27 Feb 2025
Tender Amount₹ 7,00,86,594.07
Technical
Technical
Financial
Bid Capacity
... View More
To determine the bid capacity required, we look at the estimated bid value and the criteria related to turnover and experience. The estimated bid value is given as 70086594.07. For the bid capacity, the criteria mention that the bidder must have successfully executed/completed similar services over the last three years, with specific conditions:
1. Three similar completed services costing not less than 40% of the estimated cost, which equals 28034677.63.
2. Two similar completed services costing not less than 50% of the estimated cost, which equals 35043297.035.
3. One similar completed service costing not less than 80% of the estimated cost, which equals 56069275.256. Additionally, the bidder must have a minimum average annual financial turnover of 351 Lakh (s) during the last three years and 3 years of past experience in providing similar services. The bid capacity required in terms of similar service costs is:
- At least 28034677.63 for three similar services,
- At least 35043297.035 for two similar services, or
- At least 56069275.256 for one similar service. Formulas for bid capacity based on past experience are:
- For Three Similar Completed Services: 3 * Service Cost ≥ 0.4 * Estimated Cost
- For Two Similar Completed Services: 2 * Service Cost ≥ 0.5 * Estimated Cost
- For One Similar Completed Service: 1 * Service Cost ≥ 0.8 * Estimated Cost The bid capacity also includes a financial component of a minimum average annual turnover of 351 Lakh (s) and an experiential component of 3 years of experience in similar services.
Technical Capacity
... View More
The required prior work experience for the bidder involves successfully executing or completing similar services over the last three years. The criteria for this experience are as follows: 1. Three similar completed services costing not less than 40% of the estimated cost, which is 28034677.63; 2. Two similar completed services costing not less than 50% of the estimated cost, which is 35043297.035; 3. One similar completed service costing not less than 80% of the estimated cost, which is 56069275.256. Additionally, the bidder should have a minimum average annual financial turnover during the last three years, with a specified amount of 351 Lakh. The bidder is required to have 3 years of past experience in the same or similar service, with "Past Experience of Similar Services required" being Yes.
Costs
EMD
₹ 5,00,400Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
GEM/2025/B/5849504Tender No
GEM/2025/B/5849504Tender Authority
North East Frontier Railway ViewPurchaser Address
-Website
http://bidplus.gem.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Of area 3 sq. metres and below
10
302
3027
... More
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
320
219
70320
... More
Dry brick on edge flooring in required pattern with bricks of classdesignation 7.5 on a bed of 12 mm mud mortar, including filling jointswith local sand, with common burnt clay non modular bricks.
50
733
36665
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
-
-
-
... More
40 mm thick with 20 mm nominal size stone aggregate
1000
545
545000
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :
-
-
-
... More
cement mortar 1:4 (1 cement : 4 coarse sand)
234.38
837
196375.28
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both
faces of shutters:
-
-
-
... More
30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
23.44
1881
44112.91
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
1000
214
214300
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :
-
-
-
... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
350
140
49017.5
... More
S.C.I. soil, waste and vent single socketed pipe 1.80 metres
long:100 mm dia
45
1135
51075
... More
S.C.I. plain single equal junctions 100x100x100 mm dia
10
405
4050
... More
S.C.I. bend with access door 100 mm dia
32
350
11200
... More
Oxidised mild steel tower bolt (barrel type) 150x10 mm
38
29
1102
... More
Oxidised mild steel handles 125 mm
18
20
360
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
15 mm nominal dia Pipes
150
255
38385
... More
20 mm nominal dia Pipes
150
325
48765
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL
anti-termite treatment (excluding the cost of chemical emulsion) :
-
-
-
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:
-
-
-
... More
With Chlorpyriphos E.C. 20% with 1% concentration
625
256
160093.75
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:
-
-
-
... More
Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
120
4474
536904
... More
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
-
-
-
... More
Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm).
93.75
7776
729065.63
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
3906.25
20
81445.31
... More
Wall painting with plastic emulsion paint of approved brand andmanufacture to give an even shade:
-
-
-
... More
One or more coats on old work
3906.25
90
354882.81
... More
12 mm cement plaster of mix :
-
-
-
... More
1:4 (1 cement: 4 fine sand)
793.13
294
233854.38
... More
15 mm cement plaster on the rough side of single or half brick wall ofmix :
-
-
-
... More
1:4 (1 cement: 4 fine sand)
437.5
339
148618.75
... More
12 mm cement plaster finished with a floating coat of neat cement of mix :
-
-
-
... More
1:4 (1 cement: 4 fine sand)
906.25
361
327428.13
... More
6 mm cement plaster of mix :
-
-
-
... More
1:3 (1 cement : 3 fine sand)
234.38
253
59309.86
... More
Granite of colour black, cherry/ruby red 18 mm thick (slab area above 0.50 sqm)
312.5
2000
625000
... More
1.00 mm thick with zinc coating not less than 275 gm/m²
200
1320
264070
... More
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.
-
-
-
... More
0.80 mm thick with zinc coating not less than 275 gm/m²
34.38
822
28265.52
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
1484.38
111
166176.34
... More
Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately).
-
-
-
... More
0.56 mm, Aluminium Color coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm.
156.25
1006
157234.38
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
-
-
-
... More
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
39.06
10185
397828.05
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
3125
89
280156.25
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-
-
-
-
... More
(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
6
3459
20754.3
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
6
886
5317.5
... More
Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements. Weighing not less than 106 gms.
6
96
580.5
... More
Providing and fixing toilet paper holder :
-
-
-
... More
C.P. brass
6
680
4084.8
... More
Providing and fixing PTMT towel rail complete with brackets fixed to
wooden cleats with CP brass screws with concealed fittings
arrangement of approved quality and colour.
-
-
-
... More
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
6
600
3602.1
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with
concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
6
204
1228.2
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
-
-
-
... More
Rectangular shape 1500x450 mm
6
1817
10903.2
... More
Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape,
size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
6
16100
96602.4
... More
Glazed Vitrified tiles Matt/Antiskid finish of size
-
-
-
... More
Size of Tile 800 x 800 mm
600
1544
926520
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :
-
-
-
... More
250x10 mm
24
374
8984.4
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
250
1063
265862.5
... More
Providing and fixing bright finished brass handles with screws etc. complete:
-
-
-
... More
125 mm
14
205
2871.4
... More
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
-
-
-
... More
300x16 mm
4
260
1041.2
... More
Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shade:
-
-
-
... More
New work (Two or more coats applied @ 1.43 ltr/10 sqm
over and including priming coat of exterior primer applied
@ 2.20 kg/10 sqm)
500
162
81175
... More
Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete.
50
1549
77472.5
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
-
-
-
... More
Second class teak wood
2.5
131576
328942.38
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in-Charge.
-
-
-
... More
60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern
350
932
326322.5
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
6
500
3002.1
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:
-
-
-
... More
15 mm nominal bore.
6
434
2605.2
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
-
-
-
... More
15 mm nominal bore.
6
594
3568.5
... More
12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I ,of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.
350
1247
436625
... More
Ply wood 5 ply, 9 mm thick :
-
-
-
... More
Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type
100
2400
240040
... More
Providing and fixing at all height wall panelling with phenol bonded Bamboo Mat board conforming to IS:13958-1994 including providing and fixing to frame work made of 50mm x 50mm hardwood plugs including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws all complete as per direction of Engineer-in-Charge.
-
-
-
... More
9 mm thickness
50
4459
222985
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%