Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Maint Of Water Treatment Plant Near E Block And Main Pump House, Filtration Plant And Swimming Poll Under Ge Narangi in Kamrup Metro, Assam, with an estimated contract value of Rs. 45,00,000. The bid opening date for this tender is 14-11-2026 and the last date for bid submission is 04-12-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Assam Tender

Opening Date14 Nov 2026
Closing Date4 Dec 2026
Tender Amount₹ 45,00,000 
Notes
Download

Costs

Description

Maint Of Water Treatment Plant Near E Block And Main Pump House, Filtration Plant And Swimming Poll Under Ge Narangi

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Excavation in trenches acros metal road by cutting raod / by digging trench less tunnel for passing pipe of any size and making good the road as it was by proper PCC and applying two coats of blak paint to match the surface as it was complete all as specified and directed. (The job included excavation/ trenchless tunneling and making good properly complete)

20

100

-

... More
Material and labour for run lead joint for 450 mm bore CI pipe including dismantling old/defective /wornout joint complete all as specified and directed. (Note:- Cost of excavation, returning, removal shall deemed to be included in the unit rate quoted).

2

100

-

... More
Material and labour for run lead joint for 300 mm bore CI pipe including dismantling old/defective /wornout joint complete all as specified and directed. (Note:- Cost of excavation, returning, removal shall deemed to be included in the unit rate quoted).

8

100

-

... More
Material and labour for run lead joint for 250 mm bore CI pipe including dismantling old/defective /wornout joint complete all as specified and directed. (Note:- Cost of excavation, returning, removal shall deemed to be included in the unit rate quoted).

10

100

-

... More
Material and labour for run lead joint for 200 mm bore CI pipe including dismantling old/defective /wornout joint complete all as specified and directed. (Note:- Cost of excavation, returning, removal shall deemed to be included in the unit rate quoted).

10

100

-

... More
Material and labour for run lead joint for 150 mm bore CI pipe including dismantling old/defective /wornout joint complete all as specified and directed. (Note:- Cost of excavation, returning, removal shall deemed to be included in the unit rate quoted).

10

100

-

... More
Material and labour for run lead joint for 100 mm bore CI pipe including dismantling old/defective /wornout joint complete all as specified and directed. (Note:- Cost of excavation, returning, removal shall deemed to be included in the unit rate quoted).

8

100

-

... More
Material and labour for PCC type C-2, 1:3:6 (by using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete including dismantling of existing concrete complete all as specified and directed.

2

100

-

... More
Taking up / down 100 mm bore GI water tubing and connection from trenches/ walls / floors (of any location) for replacement / re-use in old / new location complete all as specified and directed. (Note: Necessary earthwork, if any , will be measured and paid separately under relevant items)

78

100

-

... More
All as per item no 12 but of size 80 mm bore.

195

100

-

... More
All as per item no 12 but of size 50 mm bore.

310

100

-

... More
All as per item no 12 but of size 40 mm bore.

108

100

-

... More
All as per item no 12 but of size 25 mm bore.

688

100

-

... More
All as per item no 12 but of size 20 mm bore.

1770

100

-

... More
All as per item no 12 but of size 15 mm bore.

130

100

-

... More
Relaying 100 mm bore GI tubing after thoroughly cleaning, with new fittings fixed to wall/ceiling/floor or laid in trenches complete all as specified and directed.

18

100

-

... More
All as per item no 19 but of size 80 mm bore.

30

100

-

... More
All as per item no 19 but of size 50 mm bore.

80

100

-

... More
All as per item no 19 but of size 40 mm bore.

18

100

-

... More
All as per item no 19 but of size 25 mm bore.

78

100

-

... More
All as per item no 19 but of size 20 mm bore.

450

100

-

... More
All as per item no 19 but of size 15 mm bore.

40

100

-

... More
Supply, laying and testing of 100 mm bore GI tubing (medium grade) with new fittings laying in trenches complete all as specified and directed.

60

100

-

... More
All as per item no 26 but of size 80 mm bore.

165

100

-

... More
All as per item no 26 but of size 50 mm bore.

230

100

-

... More
All as per item no 26 but of size 40 mm bore.

90

100

-

... More
All as per item no 26 but of size 25 mm bore.

410

100

-

... More
All as per item no 26 but of size 20 mm bore.

620

100

-

... More
All as per item no 26 but of size 15 mm bore.

40

100

-

... More
Supply, laying and testing of 25 mm bore GI tubing (medium grade) with new fittings, fixed to walls, and ceilings or laying in floor complete all as specified and directed.

200

100

-

... More
All as per item no 33 but of size 20 mm bore .

700

100

-

... More
All as per item no 33 but of size 15 mm bore .

50

100

-

... More
Supply and fixing in repair 50 mm bore Gun metal gate valve/ball valve with iron wheel head, screwed both ends for iron pipes or for unions all as per IS : 778-84 Marked CL-1 Pressure tested 2.4 Mpa complete all as specified and directed..

2

100

-

... More
All as per item no 36 but of size 40 mm bore.

2

100

-

... More
All as per item no 36 but of size 25 mm bore.

5

100

-

... More
All as per item no 36 but of size 20 mm bore.

25

100

-

... More
All as per item no 36 but ball valve of size 15 mm .

5

100

-

... More
Supply and fixing in repair 100 mm bore CI sluice valve of Class PN-1.6, long body type, heavy duty, ISI marked (IS 1538) flanged end with iron wheel and stainless steel spindle including rubber gasket joints, nuts, bolts etc including testing complete all as specified and directed.

2

100

-

... More
All as per item no 41 but of size 150 mm bore.

2

100

-

... More
Supply only High strength Calcium based granular chlorination chemical as per IS: 10500: 2012 for treated and disinfectant water of following specifications for Water treatment in sealed packing of 45 Kgs HDPE Jars to MES store yard as directed by Engr-in- Charge. Make : Altoch GP/Rayalseema/Aquafit or as approved by E-In-Cs Br /Zonal CEs.: (a) Chemical analysis & physical observations: (i) Description: Whitish granules (ii) Granular size (Mesh passing through - 100 BSS): 1.1 (± 0.1) % (iii) Water / moisture: 5.00 (± 0.2) % (iv) Other insoluble Calcium salts: 1.1 (± 0.1) % (v) Mercury & other Heavy Metal contaminants: BDL (vi) The chlorination chemical must contain appropriate quantities of dispersants / corrosion inhibitors to prevent encrustation / scaling in distribution systems. (b) Strength in terms of quantity of chlorination chemical required to obtain free chlorine of 1 ppm per lakh liters of water requirement must be 140 - 160 gm per one lakh liter of water to achieve 1 ppm Av. Cl. at injection point ( contains not less than 60 to 70% active chlorine ). (c) Stability: Projected shelf life of chlorination chemical must be one year with minimal loss of chlorine. (d) Handling of chlorination chemical for regular chlorination: (i) Operational considerations: Must be safe to use in terms of level of insoluble components. There must be no risks relating to encrustations in equipment and pipelines, no sludge generation, no hard water scaling in supply water. (ii) Operator health considerations: Chlorination chemical must contains acceptable levels of granular size to avoid risks to operators from health safety point of view.

11

100

-

... More
Supply only Calcium Hypo Chlorite (Bleaching Powder) Grade - I with concenteration of active chlorine not less than 25% as per IS 1065:1989, stable dry free flowing white in appearance without hard lumps and visible impurities in laminated high density polythene bags to MES Store yard as directed by Engr -In -Charg. Make : Aquafit/ Shriram/DCM/ PACL/DCM or as approved .

350

100

-

... More
Supply only aluminum sulphate (Alum ferric) grade IV superior quality suitable for treatment of drinking water in the form of solid lumps of 20 kgs. Complete all as specified and as directed. Note : Rates include loading, unloading and transportation to WTP & Intake point in chandrapur or Narangi Mil station as directed by Engr-in-charge.

55

100

-

... More
Supply of only Alum Crystal Non-ferric with 85% purity for treatment of water in swimming pool paked in 50 Kgs bag complete all specified and directed.

450

100

-

... More
Supply only Inorganic polymerised liquid primary coagulant for drinking water tretment with the following specifications:- (a) Appreance : Clear to slight hazy liquid (b) Odour : odourless (c) Specific gravity : 1.3300-1.3500, (d) pH (30%) : 4.00-4.40 (e) Evaporation rate : 50-75% (Water) (f) Viscosity< 50cps. Make : UNI ALARTAN of Declibac or other equivalnet make.Notes for item No. 43 to 50: (i) Supply shall be made by the contractor based on the reuirement / piecemeal manner as directed by the AGE E/M and shall be delivered in the store yard of AGE E/M. No claim whatsoever on account of extra charges of transportation shall be entertained by the Deptt. (ii) Contractor shall provide the original purchase vouchers alongwith test certificate of entire quantity of each lot at the time of delivery. (iii) Testing of every lot of High strength Calcium based granular & Bleaching powder shall be got carried out by the contractor from NABL accreded lab at his own cost and report shall be submitted to Engr-in-Charge. (iv) Material shall be brought by the contractor in packed plastic containers/baggs as per OEM packing in sealed position. (v) The brand and make of the chlorination chemical must be recommended and certified by All India Institute of Hygiene & Public Health (Govt. of India), confirming compliance to all the above specifications with a declaration from the laboratory that from the technical, strength, stability, health, safety, and operational point of view, as well as the fact that this product is used for drinking water applications for consumption by humans, the brand and make of Calcium based granular chlorination chemical, bleachig powder & Ferric Alum are suitable for drinking water chlorination and are recommended for use.

255

100

-

... More
Supply O-Tolidiner reagent (for check residual chlorine) 500ml bottle. Make : Nice or equivalent.

6

100

-

... More
Supply of refined free-flow iodized salt conforming to the latest requirements of FSSAI and relevant BIS standards. The salt shall be white, crystalline, clean, dry, and free from visible impurities, dirt, foreign matter, and harmful contaminants. It shall contain sodium chloride (NaCl) not less than 99.0% on dry basis and iodine content not less than 15 ppm at consumer level (as potassium iodate), with moisture content not exceeding 5%. The salt shall be uniformly iodized, properly processed, and packed in moisture-proof, food-grade sealed polyethylene/laminated bags of approved capacity, clearly marked with manufacturer's name, complete in all respects as approved by the Engineer-in-Charge.

520

100

-

... More
Supply and delivery of portable digital TDS water testing meter having measuring range 0-1000, accuracy ±2%, automatic temperature compensation, LCD display, battery operated complete with carrying case and calibration certificate, suitable for testing drinking water, raw water and treated water quality."

6

100

-

... More
Material and labour for earthing complete with GI earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.50 Mtr below ground level. The earth plate to be connetced with earth strip 25×4mm thick galvanised iron or steel wire all as shown in para no 4 the earthing test point all as specified and directd. The GI earthing strip to be protected by galvanised iron pipe 40 mm bore (medium grade) up to ground level and there after with 40mm dia HDPE pipe up to test point. Earthing shall be include with providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) up to 90 cm all around earth plate further filled with 60 cm thick Tibba sand and 2nd layer with 30 cm of Magnesium sulphate powder (compact thickness ) , 3rd layer with tibba sand up to the ground level. Earthing shall also be include for providing concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work

6

100

-

... More
Taking down old UNSV/broken valve pits & Material and labour for construction of brick masonry valve pit of size 100 cm x 100 cm x 90 cm (internal dimensions), using old size sub class 'B' brick, built in CM 1:6 and 10 mm thick cement plaster 1:4 both internally and externally with 75 mm thick PCC 1:3:6 type C-2 in foundation, PCC 1:2:4 type B-2 in benching complete with and including 2 mm thick mild steel sheet cover (mounted on angle iron frame of size 50 mm x 50 mm x 6 mm thick, embedded in PCC 1:2:4 type B-1 coping), fitted with proper locking arrangement, hinges and handle of suitable size and painting with two coats of black bituminous paint over a coat of red oxide zinc chrome primer on all steel surfaces, including necessary earth work ( in soft/loose soil), returning filling and removal of surplus soil to a distance n.exc 50 m .

2

100

-

... More
Taking down old UNSV/broken valve pits & Material and labour for construction of brick masonry valve pit of size 90 cm x 90 cm x 90 cm (internal dimensions), using old size sub class 'B' brick, built in CM 1:6 and 10 mm thick cement plaster 1:4 both internally and externally with 75 mm thick PCC 1:3:6 type C-2 in foundation, PCC 1:2:4 type B-2 in benching complete with and including 2 mm thick mild steel sheet cover (mounted on angle iron frame of size 50 mm x 50 mm x 6 mm thick, embedded in PCC 1:2:4 type B-1 coping), fitted with proper locking arrangement, hinges and handle of suitable size and painting with two coats of black bituminous paint over a coat of red oxide zinc chrome primer on all steel surfaces, including necessary earth work ( in soft/loose soil), returning filling and removal of surplus soil to a distance n.exc 50 m .

2

100

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.