Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Spl Repair To Bldg No P-18 And P-19 At Chittagaon And Certain Revenue And Minor Work in Cachar, Assam, with an estimated contract value of Rs. 46,80,000. The bid opening date for this tender is 10-11-2026 and the last date for bid submission is 02-12-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Assam Tender

Opening Date10 Nov 2026
Closing Date2 Dec 2026
Tender Amount₹ 46,80,000 
Notes
Download

Costs

Description

Spl Repair To Bldg No P-18 And P-19 At Chittagaon And Certain Revenue And Minor Work

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed.

0.96

-

-

... More
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off the premises.

323.42

-

-

... More
Dismantling mild steel work or wrought iron of any description and in any position complete all as specified and as directed.

1.7

-

-

... More
Dismantling plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding, etc.including all necessary staging / scaffolding, etc. as required complete all as specified and as directed.

217

-

-

... More
Dismantling wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards slabs/blankets any thickness including cover fillets all as specified and as directed.

80

-

-

... More
Dismantling boarding any description fixed in any position with nails all as specified.

12

-

-

... More
Dismantling of rain water/sewage pipe of any type and any size including fitting complete all as specified and as directed.

58

-

-

... More
Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key scrubing down with water etc complete all as specified and as directed.

510

-

-

... More
Taking down chowkhats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm each complete all as specified.

24

-

-

... More
Taking down Chowkhats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frame) complete all as specified.

10

-

-

... More
Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.         

10

-

-

... More
Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.         

30

-

-

... More
Excavation over areas not exceeding 1.5m deep and getting out soft / lose type of soil complete all as specified and directed.

2.94

-

-

... More
Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed.

24.03

-

-

... More
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.

16.55

-

-

... More
Removing excavated materials (soils) not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

10.42

-

-

... More
Excavating in post holes each n exc 0.5 cum, getting out, in soft /loose soil, ramming earth filling or borken rubble mixed with earth around in layers nexc 25 cm watering and removing ssurfaces soil to distance nexc 50 m and making good surfaces all as specified and directed.

36

-

-

... More
M&L for PCC (1:4:8), Type D2 using 40 mm graded stone aggregate as in foundations, sub-base,filling and mass concrete complete all as specified.

3.66

-

-

... More
M&L for 75 mm thick cement concrete (1:4:8) type D-2 using (40mm graded stone aggregate) as in Sub base of floor rough surface for receiving tile complete all as specified.

100

-

-

... More
M&L for 100 mm thick cement concrete (1:4:8) type D-2 using (40mm graded stone aggregate) as in Sub base of floor rough surface complete all as specified.

60

-

-

... More
M & L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregates) as in foundations, sub-base,filling and mass concrete complete all as specified and dirceted

4.37

-

-

... More
M & L for Plain Cement Concrete (1:3:6) type C1 using 20mm graded stone aggregate as in surface channel and drain all as specified and directed.

1

-

-

... More
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends for etc complete all as specified and directed.

70

-

-

... More
M & L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and fair without using extra cement laid in panels and joints filled with bituminous mastic filling with 1 part of bitumen and 3 part of sand complete all as specified and directed.

80

-

-

... More
M & L for plain cement concrete (1:2:4) type B1 using 20mm graded crushed stone aggreagate as in lintels upto 1.50m clear span, bed blocks, coping , cills, steps, kneelers, bed plates, apex stones kerbs and similar works including necessary formwork complete all as specified and directed.

1

-

-

... More
M&L for providing 25 mm thick cement concrete (1:2:4) type B-0 using (12.50mm graded stone aggregate) as in flooring to receive the topping layers complete all as specified.

28

-

-

... More
M&L for plain cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregates) as in DPC, roof padding, haunching, roof kerb or similar works including applying 3kg/sqm neat cement slurry complete all as specified and as directed.

0.15

-

-

... More
M&L for 40mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in DPC, roof padding, haunching, roof kerb or similar works including applying 3kg/sqm neat cement slurry complete all as specified and as directed.

60

-

-

... More
M & L for Cleaning and preparation of roof/wall (RCC/BRICK/tiles/Cement concrete) surface and made free of dirt, foreign particles, laitance followed by grinding all protrusions and to make surface modulated. Thereafter, inspection of cracks on the surface caused by thermal expansion/contraction and repairing the cracks on the surface caused by thermal machine, filled with Repair Mortar/General purpose Grout in the proportions as recommended by manufacturer supplying and applying high performance Hybrid Polyurea waterproofing coating spray/hand applied liquid membrane with following specifications: (a) Elongation of range 400% 600%. (b) Tensile strength of 8-12 N/mm2. (c) Crack bridging ability of 3.00-4.00mm. (d) Hardness (Shore 'A' ASTM D2240) of range 50-70. The application shall include final base preparation, epoxy primer application in ratio 1:1 (resin: hardener) with 100% water dilution and application of Hybrid polyurea in two coats in 6 hrs interval to achieve total min thickness 1 to 1.50mm. The application/treatment shall be carried out by authorized rep of approved specialist firm/manufacturer. Make: SIKA/FOSROC/Asian Paints/Berger. Note:- The defect liability period of water proofing treatment to RCC roof slab including sunken floor shall be 10 years and the contractor shall be responsible to keep the entire building(s) free from leakage/seepage for a period of 10 years after certified date of Completion. The contractor may obtain a similar guarantee from the specialist firm engaged by him for the purpose.

60

-

-

... More
Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete complete all as specified and as directed.

20.32

-

-

... More
Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete all as specified and directed.

61.72

-

-

... More
Use and waste formwork to sides and soffits of floor or roof beam, beam hunching, girder, lintels, cantilever, shelves including supports etc for rough finished flat surfaces of concrete complete all as specified and directed

34.14

-

-

... More
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

1.44

-

-

... More
Use and waste Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide all as specified and directed.

4.8

-

-

... More
Material and labour for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and directed.

5.76

-

-

... More
Material and labour for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in column, pillars, piers, posts, and struts complete all as specified and directed.

5.24

-

-

... More
Material and labour for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5m complete all as specified and directed.

2.99

-

-

... More
Material and labour for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in slab supported on walls, beams and columns in floors, roof landing balconies, canopies, deck slab and shelves and like complete all as specified and directed.

0.29

-

-

... More
M & L for Mild steel TMT bars 10mm dia and over, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

1538.92

-

-

... More
M & L for Mild Steel TMT Bar 6mm dia and over up to 10 mm dia as in stirrups, spacers and binders as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed

384.73

-

-

... More
M & L for brickwork with subclass 'B' or locally available best quality old size bricks, straight or curved on plan exc 6 m mean raduis, built in CM (1:4) complete all as specified and directed.

3.31

-

-

... More
M & L for brickwork with subclass 'B' or locally available best quality old size bricks, straight or curved on plan exc 6 m mean raduis, built in CM (1:6) complete all as specified and directed.

0.5

-

-

... More
M & L for brick work in cement mortar (1:4) straight or curved on plan to any radius with locally available Subclass ‘B’ old size best quality bricks in half brick thick wall complete all as specified .

4

-

-

... More
M&L for 5 mm thick rendering in cement mortar (1:3) in ceiling surfaces finished even and smooth complete all as specified.

50

-

-

... More
M&L for rendering 10 mm thick in cement mortar (1:3) on fair faces of brickwork or concrete complete all as specified.

58

-

-

... More
M & L for 10 mm thick rendering in cement mortar 1:4 over roof surface and connected surfaces with mix WPT compound @3% by Wt of cement, finished the surfaces even and smooth without using extra cement complete all as specified.

66

-

-

... More
M & L rendering 10mm thick cement mortar (1:6) on other than fair faces of brick wall or concrete surfaces, finished fair and even without using extra cement complete all as specified.

300

-

-

... More
M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick wall or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified.

20.4

-

-

... More
M & L for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick wall or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified.

28.32

-

-

... More
M & L rendering 15 mm thick cement plaster in two layer each of 10+5 mm thick on any faces of brick wall or concrete surfaces in CM (1:4) & water proofing compound mixed with second layer @ 3% finished even and smooth without using extra cement complete all as specified. (Note :WPC measured separately).

160

-

-

... More
Supply only integral water proofing compound (WPC) complete all as specified.

17.02

-

-

... More
M & L Non Skid ceramic tiles coloured 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 but not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15 mm thick screed bed or bedding layers in cement mortar 1:4 over brushing with neat cement slurry complete all as specified.

131.32

-

-

... More
M & L Non Skid ceramic tiles coloured 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15 mm thick screed bed or bedding layers in cement mortar 1:4 over brushing with neat cement slurry complete all as specified.

6.5

-

-

... More
M & L Non-skid coloured ceramic tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exc 0.18 sqm but not exc 0.36 sqm as in vertical surfaces of skirting/dado etc over and including 10 mm thick rendering in cm (1:4) as backing coat complete all as specified.

13.6

-

-

... More
M & L Glazed ceramic coloured tiles size 450mm X 300mm X & ( 6mm to 7mm )mm thick set in vertical surface as skirting/ dado and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10mm thick backing coat in cement mortar 1:4 laying of skirting/dado on walls all as specified and directed.

64

-

-

... More
M&L for 18-20mm thick granite stone slab, of any type, table rubbed and polished, in steps, jambs, pillars, window cills, cooking platforms and the like in laid over and including 15mm thick screed in cement mortar (1:4) (rate shall be included) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab complete all as specified and as directed.

8

-

-

... More
M&L pre-polished chequered coloured paver tiles 25mm thick, area of each tile exceeding 0.06sqm but not exceeding 0.11sqm, in floors, set, jointed & pointed with neat white cement slurry mixed with pigment to match colour of tile, laid over and including 20mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and as directed.

100

-

-

... More
Supply & Laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

72

-

-

... More
Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated/ trepozoidal steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

283.16

-

-

... More
Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

24.92

-

-

... More
Supply and fix Framed work such as grills, gratings, etc.. with ends of bars or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

470

-

-

... More
Extra only over above item, for portions framed and hung as gates, incl pintle hinges, stop, hand made sliding bolts etc complete all as specified and directed.

5

-

-

... More
Supply and fix Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers,hold fasts, bands, straps, wall ties, plain angle cleats, eaves board frame and similar articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

10

-

-

... More
Supply and fix MS screw bolts (machine made ) with hexagonal or square heads at one end & screwed the other or screwed both ends ,each screwed end to be fitted with washers & one hexagonal or square, diameter of neck 12mm and nexc 5cm long complete all as specified & as directed.

14.11

-

-

... More
Supply and fix structural steel work in tubular/hollow sections trusses , Purlin , posts, rafter etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as as specified and directed.

903.32

-

-

... More
Supply chain link mild steel galvanised fencing of mesh shall be approved by GE made of Gl wire including line wires, to any type of standards, rails, straining bolt, etc including provision of binding wire complete all as specified and directed.

688.8

-

-

... More
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire and fixed complete all as specified and shown on drawings

172.2

-

-

... More
M & L for Mild steel round bar 10mm dia as in ties to chain link fencing incl necessary bending etc complete all as specified and directed.

202.38

-

-

... More
M&L for Mild steel angle, flat work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. conforming to Fe-290-GdeE-165 complete all as specified & as directed.

881.94

-

-

... More
Supply & fixing Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing 100 and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised MS wire staples or steel pin etc complete all as specified and directed.

4.92

-

-

... More
S & F in second class hardwood plain, solid, straight chowkats and frame, wrought framed rebated in the solid rounded or chamfered put togather with glass, pinned at joints complete all as specified.

0.57

-

-

... More
M & L Plain Cement concrete (1:3:6), type C-0 using 12.5mm graded stone aggregate as in filling of steel chowkhats and concrete for fixing of holdfast including necessary form work complete all as specified.

0.1

-

-

... More
S&F 2nd class hard wood glazed and skeleton door shutters 35 mm thick open rebated and prepared to receive glass, guage etc (withoput sash bars), edge of framing plain chemfered ro rounded fitted with cut and mitred beds for securing glass etc size of members of shutter as specified in SSR Part I section 8 clause 8.20(a) complete all as specified and directed.

6.2

-

-

... More
S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides , smooth finish with lipping of teak wood on edges all as specified and directed.

16

-

-

... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45mm X 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms), fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm², modulus of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: 1. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). 2. For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

19.8

-

-

... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K- value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately).

5.2

-

-

... More
S&F factory made uPVC white colour sliding window three track area not exceeding 2.00sqm each made of extruded profiles with wall thickness of 2.3mm(±0.2mm) window profile with hollow section with multi chamber frame (88mmX52mm), sliding sash (42mmX67mm), sliding mesh sash (42mmX57mm), sliding interlock(one vertical lenght in each shutter) (45mmX28mm), glazing bead (24.5mmX16mm) will be mitred cut and fusion welded all corners including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing hardware EPDM gasket1.2±0.2mm thick galvanised steel frame(30mmX18mm) 2 Nos, sliding sash (30mmX18mm), sliding mesh sash(26mmX10mm) profile to be inserted in required profile frame will be fixed to the wall with 8mmx100mm long fastener, hardware Touch lock of zinc alloyed (white powder coated), steel roller system, SS wire cloth 0.36mm nominal dia of wire and average width aperture 1.40mm and required accessories, complete all as specified and as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessoires . Net opening will be measured for payment purpose)

17.3

-

-

... More
Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

10

-

-

... More
S&F 4.00 mm thick sheet glass ordinary quality and glazing with oil putting square n exc 0.5 sqm in each pane complete all as specified.

20

-

-

... More
S&F 4.00 mm thick sheet glass frosted ordinary quality and glazing with oil putting square nexc 0.5 sqm in each pane complete all as specified.

1.5

-

-

... More
S&F 100mm long MS Butt hinges, medium weight, cold rolled complete all as specified.

44

-

-

... More
Supply and fix 125 mm long aluminium handles cast type anodised complete all as specified & directed .

44

-

-

... More
Supply and fix 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

44

-

-

... More
Supply and fix 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified.

4

-

-

... More
S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

4

-

-

... More
S & F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate complete all as specified and directed.

12

-

-

... More
S & F as in repairs, 25 mm dia and 1mm thick MS chromium plated curtain rods with fixing side fancy type brackets end knobs fixed with steel screws etc all as specified and directed .

26

-

-

... More
S & F as in repair, vitreous china wash basin, white flat back size 550mm x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including waste coupling, brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified.

2

-

-

... More
S & F in repair, vitreous china Squatting pan, 'Orissa' pattern, Size 580mm X 440mm ,with integral foot rests (excluding flushing ciestern and flush pipe) incl necessary cement concrete bedding and 100 mm bore cast iron 'P' trap with 550 to 600mm long neck for connecting WC to branch piece with cement joints complete all as specified & as directed .

2

-

-

... More
S & F in repair, PVC valveless, syphonic action type, low level flushing cistren 10 ltr capacity ISI Marked incl all acessories and 32mm dia PVC flush / discharge pipe incl float valve, inlet complete all as specified.

2

-

-

... More
S & F in repair, stainless steel soap dish chromium plated standerd quality size 110mm approved design fixed on wall with brass screw complete all as specified.

2

-

-

... More
S & F in repair PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified.

4

-

-

... More
S & F 15mm bore pillar tap cast copper alloy with capstan head, chromium plated concealed screwed down high pressure with or without hot or cold with long shunk screwed shanks and fly nuts screwed for iron pipes and connecting to water pipe line complete all specified and directed.

2

-

-

... More
Supply and fix as 15 mm bore bib taps fancy type, chromium plated, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all specified and directed.

8

-

-

... More
Supply and fix 15mm bore stop valve valve, cast copper alloy cromium plated fancy type screwed down high pressure, with crutch or butterfly handle for 15 mm bore pipe or for unions complete all specified and directed.

10

-

-

... More
Supply and fix Towel rail, 20mm dia 'D' Type aluminum anodised , 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs as in repair complete all as specified.

2

-

-

... More
Supply and fix as in repair 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass complete all as specified. Make : Parryware cat No. T9809A1 or equivalent as per approved list of make.

2

-

-

... More
S&F in repair, sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long fixed in position with CP screw complete all as specified and directed.

2

-

-

... More
S&F in repair, 12mm thick corner glass shelf 250mm radius with flanges of brass chromium plated D clamps including brackets and railing fixed in position with CP screw complete all as specified and directed.

2

-

-

... More
S & F as in repair, 600mm X 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.

2

-

-

... More
Supply and fix in repair, stainless steel sink with drainage board made of stainless steel 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc. with bedding layer in cement mortar on to dwarf wall, overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed.

2

-

-

... More
Supply and fix in repair stainless steel plate rack made of stainless steel 1.00mm thick for kitchen or laboratory with fixing SS screw , overall size not less than 31 X 24 X 10 inches complete all as specified and as directed.

2

-

-

... More
Supply and fix as in repairs, 32 mm dia and 800mm long PVC flexible corrugated waste pipe for wash basin/sink complete all as specified and as directed. Make : (Prayag CAT No. 327) or equivalent as per approved product list.

2

-

-

... More
Supply and Fix of 16mm outer dia CPVC pipe SDR 11 with plain CPVC SDR 11 fittings on laying in trenches complete all as specified.

10

-

-

... More
Supply and fix 110mm bore PVC (SWR) pipes single socketed with rubber joint, in any length, laid in trenches or in floors / fixed to walls complete all as specified.

50

-

-

... More
Supply and fix 75mm bore PVC (SWR) pipes single socketed with rubber joint, in any length fixed to walls / floors or in trenches complete all as specified.

8

-

-

... More
Supply and fix 110mm bore PVC (SWR) bend suitable for pipe complete all as specified.

4

-

-

... More
Supply & Fixed 75mm bore PVC (SWR) bends suitable for pipe complete all as specified.

2

-

-

... More
Supply & Fixed PVC (SWR) vent cowl 110mm bore suitable for pipe complete all as specified.

4

-

-

... More
Supply and fix 110mm bore PVC (SWR) junction, single T equal or unequal with or without door access complete all as specified.

1

-

-

... More
M & L PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing material with solvent, cement etc complete all as specified.

4

-

-

... More
S&F 15mm bore steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for water connections complete all as specified and as directed.

20

-

-

... More
S&F 20mm bore steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for water connections complete all as specified and as directed.

40

-

-

... More
Cutting chases, pinning in, making good to facing where required and pointed in cement mortar 1:3 and making good cutting exceeding 10 cm girth complete all as specified.

10

-

-

... More
Supply and fix 20 mm bore dia, Gun-metal, gate valves, with iron wheel head, screwed both ends on GI pipes with GI union fixed in existing/ new location complete all as specified and directed.

3

-

-

... More
Supplying, hoisting, fixing and connecting up 250 litre rotational moulded polythylene water storage tanks double layer (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I including connecting the overflow drain out, inlet and outlet pipes, tank nipple, elbow, bend, unions, sockets, etc. including taking down old damaged water tank with all fittings and disposing off complete all as specified and as directed

1

-

-

... More
Supplying, hoisting, fixing and connecting up 1000 litre rotational moulded polythylene water storage tanks double layer (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I including connecting the overflow drain out, inlet and outlet pipes, tank nipple, elbow, bend, unions, sockets, etc. complete including taking down old damaged water tank with all fittings and disposing off complete all as specified and as directed

2

-

-

... More
S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod & high- density plastic bal screwed for iron pipe and fixed (min wt 15mm-142gms/20mm-210gms/25mm- 455gms/40mm-690gms) for 25mm bore pipe complete all as specified and directed.

3

-

-

... More
Material and labour for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600mmx600mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick high Pressure high pressure Non Asbestos Fiber Cement decorative Board (E-Board Classic) in a grid of GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall, flush fiiting 1220mm cross tee to be interlocked between main runners @ 610mm c/c, as to form 600 mm x 600 mm grid and incl apply coloured painting work with two coat of acrylic emulsion paint over a coat of cement primer before installing it on the grid all as specified and directed. Make : Everest Industries Ltd or equivalent as per IS 14862 all as specified and directed.

80

-

-

... More
M & L for preparation of new or previously untreated wall surfaces and applying three coats of white wash complete all as specified and directed.

58.32

-

-

... More
M & L for preparation of new or previously untreated ceiling surfaces and applying three coats of white wash complete all as specified and directed.

50

-

-

... More
M & L preparation of new plastered surface of walls and applying two coat of cement base paint over one coat of primer complete all as specified.

14.4

-

-

... More
M&L for one coat of acrylic water based exterior grade primer @0.9 ltr (undiluted)/10 sqmtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for application of subsequent coats complete all as specified and directed. Note: (a) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b) Cost of scaffolding upto 10m height of building is included in this item. (c) The work shall be executed by authorized reps of the approved manufacturer. The contractor shall submit the 'Memorandum of understanding' (MOU) with one of the approved manufacturer. (d) 05 years guarantee of painting work will be admissible after date of completion and 15% amount will be reserve against painting work after date of completion for the 05 years. (e) Complete removal of existing surface if required to be measured and paid separately.

160

-

-

... More
M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/10 sqm diluted with water as per manufacturer instructions applied over priming coat (included) with fully automatic airless spray machine of paint application with a flow speed of min 1 litre per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both coats of paint complete all as directed. Note: (a) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b) Cost of scaffolding upto 10m height of building is included in this item. (c) The work shall be executed by authorized reps of the approved manufacturer. The contractor shall submit the 'Memorandum of understanding' (MOU) with one of the approved manufacturer. (d) 05 years guarantee of painting work will be admissible after date of completion and 15% amount will be reserve against painting work after date of completion for the 05 years. (Make : ASIAN, BERGER and DULEX) (e) Complete removal of existing surface if required to be measured and paid separately.

160

-

-

... More
M&L for two coats of oil bound distemper including primer as per manufacturer guidelines using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 m. Spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hand to reach areas and penetration of distemper on the surface complete all as directed. Note: (a) Sanding of the surface to be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for clean environment certified by paint manufacturer. (b) The work pertaining to periodical services and water proofing shall be executed from authorised applicator through manufacturer of which the materials i.e. paint, distemper, putty etc is proposed to be used by the contractor and approved by Garrison Engineer. (c) Cost of scaffolding upto 10m height of building is included in this item. (d) The work shall be executed by authorized reps of the approved manufacturer. The contractor shall submit the 'Memorandum of understanding' (MOU) with one of the approved manufacturer . (e) Complete removal of existing surface if required to be measured and paid separately.

300

-

-

... More
Material & Labour for preparation of old plastered surface applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm using roller complete all as specified and directed.

58

-

-

... More
Material & Labour for preparation of new plastered surface applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm using roller complete all as specified and directed.

6

-

-

... More
M & L preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

87.16

-

-

... More
M & L preparation of old steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed.

40

-

-

... More
M & L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coat of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

72.14

-

-

... More
E & M Division items

-

-

-

... More
Taking down carefully copper/aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc including removing from site for taking credit and making good to disturbed surface of walls, floors etc as per existing specification complete all as specified and as directed.

104

-

-

... More
Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed.

36

-

-

... More
Dismantling old unserviceable main switches, sheet metal enclosures DB including MCBs etc and removing from site for taking credit incl making good to disturbed surface of wall as per existing specification complete all as specified and as directed.

6

-

-

... More
Taking out of old U/s GI pipe of size 40 mm/50mm bore complete all as specified and directed.

12

-

-

... More
Taking out old U/s XLPE cable of any size/type taking out of olf bricks/cable cover complete all as specified and directed. (Excavation and earth work will be measured and paid separately under respective items)

205

-

-

... More
Taking out old U/s GI PIPE of any size/type including all fittings wth spigot and socket ends and lead joits including burning out joints and recovering lead etc complete all as specified and directed. (Excavation and earth work will be measured and paid separately under respective items)

120

-

-

... More
M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, concealed PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One light point controlled by one switch.

46

-

-

... More
M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, concealed PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One fan point/exhaust fan point controlled by one, one way switch 5 Amp.

14

-

-

... More
M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, concealed PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One 3 pin 5 Amp socket outlet point controlled by one switch on the same board.

8

-

-

... More
M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One 3 pin 5 Amp socket outlet point controlled by one switch on independent board.

26

-

-

... More
M&L for point wiring with FRLS stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC conduit including all accessories etc ISI marked, with PVC surface boxes suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly for one bell point controlled by one, one way switch 5 Amp complete all as specified and directed.

2

-

-

... More
M & L for point wiring with FRLSH stranded copper conductor 2.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 2.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for 3 pin, 15 Amp socket outlet, independent

8

-

-

... More
M&L for point wiring with FRLSH stranded copper conductor 4.0 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, concealed PVC Conduit concealed type of suitable size including all accessories etc ISI marked, with GI sheet pressed terminal box (recessed) with 3mm thick laminated hylem sheet top cover for fixing switches, sockets and regulators including PVC insulated FRLSH stranded copper conductor 4.0 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for one power point on independent board of AC/equipments etc controlled by one SP/SPN MCB. Note: The point wiring will be done from DBs to the switch sockets of any size with three wires running independently for each point and with no tappings.

2

-

-

... More
S&F switch piano flush type button single pole one way 5 Amps all as specified and directed.

98

-

-

... More
S&F socket outlet 2 in 1, 3 pin 5 Amp flush type all as specified and directed.

34

-

-

... More
S&F switch socket combination 5 in 1, 5Amp/16 Amp flush type with all as specified and directed.

8

-

-

... More
S&F ceiling rose surface bakelite with three terminals all as specified and directed

64

-

-

... More
S&F lamp angular holder insulated body with back plate complete all as specified.

4

-

-

... More
S&F bell push flush type 5 Amps complete all as specified and directed

2

-

-

... More
S&F bell electric ding dong type suitable for operation on 230 volt 50 Hz AC supply complete all as specified and directed.

2

-

-

... More
M & L for submain wiring with two single core 1.5 sqmm PVC insulated unsheathed cable multi-strand copper conductor FRLSH drawn through and including PVC non metallic rigid PVC Conduit with all fittings and fixing accessories on roof, walls, ceiling etc including 1 x 1.5 sqmm PVC insulated unsheathed multi strand copper conductor earth wire FRLSH connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing complete all as specified and directed. Note: Two run of single core cable, one run earth wire and one run PVC Conduit will be measured as one length.

90

-

-

... More
M & L for submain wiring with two single core 4.0 sqmm PVC insulated unsheathed cable multi-strand copper conductor FRLSH drawn through and including PVC non metallic rigid PVC Conduit with all fittings and fixing accessories on roof, walls, ceiling etc including 1 x 4.0 sqmm PVC insulated unsheathed multi strand copper conductor earth wire FRLSH connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing complete all as specified and directed. Note: Two run of single core cable, one run earth wire and one run PVC Conduit will be measured as one length.

36

-

-

... More
Supply & Fix LED betten plastic type fitting of capacity 20W, operating on 230V, 50Hz, AC Supply having luminous efficiancy not less than 125 lumens/watts, CCT 6500K, P.F>0.9, 2.5 KV surge protection, 4-feet long with decorative end caps elegently designed complete all as specified. Make : Cat Part No LDLL20-WW of crompton or equivalent of make

24

-

-

... More
S&F wall mounted, compact LED batten 20 watt and connecting with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed Make : Crompton Cat No- LDLL20-WW or equivalent as per approved make list.

4

-

-

... More
S & F LED decorative light fitting made up of polycarbonate, suitable for 9W LED lamp B22 base, classic wal light suitable for living / bed room, antique surface sleek of approved design with 9W LED lamp and connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Cat Part No. LHDL06160099 Havells or equivalent as per approved product list

4

-

-

... More
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

6

-

-

... More
S&F 9W LED bulb Provides Upto 4 Hours power backup energy effecient BEE 5 Star rated all as specified and directed. Make: Crompton Cat No B-22/E27-CDL/WW or equivalent as per approved product list

4

-

-

... More
S&F 30 watt bldg security light, including LED luminaire made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP66 protection and impact resistance of IK07 including fixing arrangements and taking down old rusted bracket fittings complete all as per directed by Engr- in – charge. Make - Crompton Cat No LSTS-30-CDL/NL-M or equivalent as per approved product list.

10

-

-

... More
S&F plastic body exhaust fan 250mm sweep complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding and connecting to ceiling rose with flexible copper cable including making holes on the wall and making good to the disturbed surfaces including taking down of old UNSV one and depositing to MES storeyard for keeping in safe custody complete all as specified and directed.

4

-

-

... More
S&F Metal steel body exhaust fan 300 mm sweep complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding and connecting to ceiling rose with flexible copper cable including making holes on the wall and making good to the disturbed surfaces including taking down of old UNSV one and depositing to MES storeyard for keeping in safe custody complete all as specified and directed.

2

-

-

... More
S&F BLDC ceiling fan 1200mm sweep complete with blades, down rods and accessories, 230 V, min air delivery 210 CFM with service value 6.00 BEE 5 star rated & provn of ‘S’ type fan hook with one elctronic regulator including taking down of old UNSV one and depositing to MES storeyard for keeping in safe custody complete all as specified and directed.

8

-

-

... More
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2.0 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc complete all as specified and as directed.

2

-

-

... More
S&F factory made distribution board sheet metal enclosure powder coated single phase neutral (SPN) 12 way double door with Aluminum bus bar 100 Amp for fixing of MCBs including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.

2

-

-

... More
S&F factory made distribution board sheet metal enclosure powder coated single phase neutral (SPN) 4 way double door with Aluminum bus bar 200 Amp for fixing of MCBs including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.

1

-

-

... More
S&F single pole and neutral enclosure with a two pin and earth and metal clad plug socket complete with one single pole MCB 20 Amp 240 Volts complete ail as specified including concealing in wall complete all as specified.

1

-

-

... More
S&F Modular type AC Startor with green & red flush button 230 Volts complete all as specified including concealing in wall suitable for Geyser, AC and Domestic appliances complete all as specified and directed.

4

-

-

... More
S&F MCB SPN of capacity 6-32 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed.

1

-

-

... More
S&F MCB SPN of capacity 40-63 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed.

2

-

-

... More
S&F MCB SP of capacity 5-32 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed.

22

-

-

... More
Taking out old existing earthing and M & L for new earthing with galvanised steel earth plate electrode 600mmX600mmX6mm thick burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm dia GI wire protected by 20 mm bore light grade galvanised iron pipe and other end connected to test point as directed including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternaterlayers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover 10mm thick hinged to CI frame and 6mm MS rod for handle, necessary excavation and earth wok in hard/dense soil and disposal of spoil to a distance n exc 50 m and necessary testing complete all as shown in electrical plate No 3 of SSR part-I complete all as specified and directed.

3

-

-

... More
Supply, installation, testing and commissioning, CPRI approved factory made and tested, Control Panel, outdoor type of Suitable Size platform mounted. The panel shall be dust and vermin proof, IP65 class protection and madeout of 3.15 mm thick CRCA MS Sheet and 50x50x5mm thick angle iron frame work, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front opening type, with aprons for cable entry, with double door shutter and locking arrangement, internal wiring with 2.5 sqmm PVC insulated, stranded copper conductor cable, IS-694 marked of adequate size and internal connection from MCCBS, MCBS and TPN aluminium bus bar and extension links of rating not less than 1.5 times the rated capacity of the respective MCCBs. The TPN bus bar and extension links shall be insulated with colour code heat shrinkable sleeve and shall be mounted epoxy regin insulator to contactor not less than 10 sqmm single core copper cable stranded copper conductor cable, IS-694 marked. The following items accommodated with this feeder pillar including 02 Nos danger notice plate made of 1.6mm thick mild steel sheet, vitreous enamelled white of size 25 x 20cm with letter figures and conventional skull bones in signal red colour and fixed nuts, bolts and washers etc with voltage and danger indicated in Hindi and English complete all as specified and directed. The scope of work includes the following items accommodate the same panel:-

1

-

-

... More
Incoming: (a) MCB 4 pole, 415 volts AC grade, 32 Amps, 10 kA Ics = 100%Icu (Make: Legrand/Schnider/SIEMENS) - 01 No (b) MCB 2 pole, 415 volts AC grade, 16 Amps, 10 kA Ics = 100%Icu (Make: Legrand/Schnider/SIEMENS) - 01 No (c) Digital voltmeter (0-500V) with selector switch = 01 No (d) Digital ammeter (0-400 Amp) incl CT (ratio 400/5) = 01 No and selector switch = 01 No (e) LED lamps for phases indication R-Y-B = 01 set (f) selector switch = 01 Nos (g) Contactor 25-32 Amps = 01 Nos Note: Foundation for the panel should provide with PCC 1:4:6 at a depth of 150mm beow ground level and 100mm above the ground level with slot openings for I/C and O/G cables

-

-

-

... More
Supply, Installation, Testing & Commissioning of Flat Plate collector (FPC) Solar Water Heating System comprising of solar flat plate collector ISI Marked capacity 200 LPD, made of copper sheet/copper tube, absorber toughened glass cover and aluminium extruded channel confirm to IS: 12933 (Part 1,2,3&5). The system shall have temperature gauges, strainer, water meter 2 nos., cold and hot water tank. The system shall have suitable electric backup complete with control and power wiring etc., as following:- 1. Cover plate: cover plate shall be toughened glass and thickness of 4.0 mm (min) conforming to section -1 of IS: 12933(pt-2)/2003 the solar transmittances of the cover plate shall be minimum 82 percent at near normal ncidence. 2. Collector box: collector box shall be made of aluminium sections. The type grade, size, and finish of the material used shall be as per section-2 of IS: 12933 (pt-2)/2003: the minimum thickness of aluminium shall be as under:- (a). Channel section for sides 1.6 mm (b). Sheet for bottom 0.7 mm (c). Support for glass retaining 1.2 mm (d). Sheet for entire body 1.0 mm The insulation of collector box shall be minimum 0.96 sq.m 0C/W for back insulation and minimum 0.48 m square degree c/w for side insulation conform to sec. 4 of IS 12933 (Part-2)/2003. (b) Gaskets and grommets: gaskets and grommets shall conform to Sec.-5 of IS 12933 (pt-2)/2003.

1

-

-

... More
3. Absorber Shall Consist of riser, Header and Sheet for absorber. The Diameter of header shall be 25.4+/-0.5mm and thickness 0.71mm. The Diameter of riser shall be 12.7+/-0.5 mm and thickness 0.56mm and made of copper only. The distance between the risers from centre to centre shall be 120mm. type grade, size, workmanship and finish of the material used shall be as per section-3 of IS: 12933 (pt-2)/2003 the sheet for absorber shall be of copper sheet 34 gauge/copper tube (at least 10 nos.) 4. Riser and header assembly designed for working pressure up 245 k pa (2:5 kg/ cm square) shall be tested for leakage at a minimum hydraulic pressure of 490 k pascal (5 kg/cm square). Sheet for absorber shall be made of copper only. Type Grade, size, workmanship and finis of the material used shall be per Section -3 of IS: 12933 (pt-2)/2003. 5. HDPE/LDPE cold water tank and hot water tank shall be dully erected on MS angle /channel duly painted with dual coats of enamel paint. The overall structure of solar collector plate module shall be design to with stand wind velocity of 100 kms/hr (minimum) or more as per site. 6. Hot water tank: The tank capacity shall be minimum 1.25 time the rated capacity of system. Inner tank material shall be stainless steel SS 316, as per IS 1730 GRADE SS304-2B. Hot water shall be insulated with high density injected PUF insulation: 50 mm, of 50 mm thickness between inner and outer tank ensures maximum heat rotenone ever season. 7. Suitable nos. ISI Marked electrical heaters along control panel, suitable breaker all protections, and all safety provisions so as to achieve 600°C temperature rise in an hour. The range of thermostat shall be upto 80°C

-

-

-

... More
Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, cross sectional area 16 sqmm 4.0 core 1100 volts grade laid in trenches/fixed to wall/under road/pipe etc with copper cable glands & copper thimbles complete all as specified and directed.

275

-

-

... More
Supply, laying and fixing, passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm x 3 core nominai cross section in service connections including necessary connection and providing cable lugs as required all as specified.

40

-

-

... More
S & F GI tube light grade 40mm bore with fittings for protection of cable complete all as specified and directed.

12

-

-

... More
S&F 25mm bore steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for water connections complete all as specified and as directed.

170

-

-

... More
S&F gun metal gate valve 25mm dia, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed.

1

-

-

... More
M & L for cutting and inserting 25mm Tee in existing pipe 25mm bore pipe for taking branch complete all as specified and directed.

2

-

-

... More
Supply and laying of Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm nominal dia 20 mm dia SDR 13.5 & plain CPVC SDR 13.5 suitable for cold and hot water including all required fittings in trenches/ wall/ floor including clamping, screws etc complete all specified and directed.

24

-

-

... More
Supply and laying of CPVC pipes of size 16 mm dia SDR 13.5 & plain CPVC SDR 13.5 suitable for cold and hot water including all required fittings in trenches/wall/ floor including clamping, screws etc complete all specified and directed.

30

-

-

... More
S&F 15mm bore bib taps ,cast copper alloy, chromium plated with crutch or butter fly handle, screwed down for suitable GI/CPVC pipe complete all as specified and directed.

3

-

-

... More
Material and labour for cross arm bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated complete all as specified and directed.

150

-

-

... More
M & L preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer for cross arm fabricated metal surface complete all as specified and as directed.

100

-

-

... More
M & L for cutting existing road / hard standing for laying GI pipe not exc size 45cmX45cm in wide and depth getting out execavated material incl returning filling wth well ramming watering, removal of surplus soil and cutting road filling from 150 mm thick PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate complete all as specified and directed.

1.5

-

-

... More
Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed.

63.9

-

-

... More
Returning, filling in trenches including spreading, leveling watering and ramming in layers not exceeding 25cm all as specified.

43.58

-

-

... More
Removing of surplus soil not exceeding 50 m and deposited where directed at a level not exceeding 1.50m above the starting point all as specified.

20.32

-

-

... More
M & L for sand cushioning by spreading in trenches crushed sand by gently by punning down manually as in cable protection all as specified and as directed by Engineer -in-charge. Note : Thickness of sand cushioning after punning down will be measured.

13.28

-

-

... More
M&L for bricks sub-class 'B' designation 75 of size 230X115X75mm laid in trenches for cable protection complete all as specified and directed.

1426

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.