Irrigation Department Tender
... More
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Technical
Technical
Financial
Additional Eligibility
Class Of Bidder
... View More
Class-I(A) & (B) Contractors/firms
Bid Capacity
... View More
The formula for bid capacity can be represented as: Bid Capacity = (Average Annual Turnover / NIT/Package Value) >= 0.3, where Average Annual Turnover is the average of the contractor's annual turnover for the last 5 financial years. Alternatively, it can also be represented as: Bid Capacity = (Maximum annual turnover in last 5 years) / (Package value) >= 0.3 or 30%.
Technical Capacity
... View More
The required prior work experience for the bidder is that they should have completed works of similar nature over the last five years. The bidder should have experience in execution of Civil works. The value and percentage of similar works completed are mentioned as follows: - The bidder should have completed a single work order with a minimum value as per clause 3.VI.a.
- The bidder should have completed works similar to the one being tendered, with a value of at least 35% for completed works of the NIT/Package value.
- The bidder's average annual turnover should not be less than 30% of the NIT/Package value, calculated over the last 5 financial years.
- The maximum (audited/unaudited) annual turnover within the last five years of the contractors should not be less than 30% of package value.
- The bidder should also provide information on the total value of Civil Engineering construction work performed in the last five years, with a certificate from a Chartered Accountant.
- The bidder needs to submit a statement of the total monetary value of civil construction work performed in any Government Department during the last 3 years. Additionally, the bidder needs to submit completion certificates or up-to-date progress for all works allotted during the last 3 years, issued by the concerned Executive Engineer(s). The bidder's annual turnover for the consecutive last 5 years is also considered, with a weightage of 40% for comparison of bids and selection for award. The highest value of a single work completed for any Works Department in the Government of Assam during the last 5 years is given a weightage of 35%.
Costs
EMD
₹ 6,44,984Document Cost
₹ 6,500Tender Fee
Refer Documents
Summary
Renovation Of Longa F.i.s. Under Sopd-tsp For The Year 2024-25 Under Gossaigaon Kokrajhar West Division (irrigation) Gossaigaon
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_ID_44207_1Tender No
03 _SOPD_TSP_ 2025_26 Date_30_04_2025Tender Authority
Irrigation Department ViewPurchaser Address
-Website
http://https://irrigation.assam.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Labour for preparation of sub grade of lined canal section as per design drawing and grade by ramming and rolled to level and according to the required cross section of the canal including cutting, filling the existing canal section where necessary compacing the earth in layers in not more than 15cm thick to form a firm compacted bed and side for lining including watering to obtain required moisture content where necessary etc. complete as directed.
1575
66
-
... More
C.C work in proportion 1:3:6 in foundation / abutment / piers / wing walls etc.with hard broken stone agg. of size 13 mm to 38 mm including curing with necessary timber shuttering, scaffolding etc.where necessary complete as directed. (Shuttering, scaffolding cost will be paid separately).
62.25
9632
-
... More
Providing 50 mm wide expansion joints with bituminous compound mixed with coarse sand for canal work at an interval of 10 M apart including laying, fitting the compound in proper position, etc, complete as directed.
64
544
-
... More
Labour charge for pitching with one man size boulder including dressing and ramming the seat to proper size and slope, pitching etc. with local carriage of boulders from a distance of 60 M with lift upto 3 M, complete as directed.
473
862
-
... More
Renovation of Afflux and Guide Bund
-
-
-
... More
Labour charge for spreading of hard river gravel or broken stone of size 13 mm to 38 mm to the required thickness including dressing and ramming the seat before laying the materials as directed with a lead upto 30 M and lift upto 1.5 M, complete as directed
118.13
463
-
... More
Collection of hard river gravel of size 13 mm to 38 mm free from dust and dirt from quarry including loading unloading etc. complete as directed.
118.13
1217
-
... More
CC work in proportion 1:2:4 in foundation / abutment /piers / wing walls etc. with hard broken stone aggregate of size 13 mm to 38 mm including curing including dewatering with necessary timber shuttering,scaffolding etc. where necessary, complete as directed.(Shuttering, scaffolding cost will be paid separately)
157.91
9632
-
... More
Carriage of boulders/gravels/metal screening, stacking in measurable stacks at site complete as directed . ( Av Distance = 25 km )
473
1103
-
... More
Construction of 1.50 M x 1.00 M rectangular boulder sausage including supplying of materials with 25 cm to 30 cm size boulders collecting from a lead of 25 KM encased in 15 cm mesh of 8G hexagonal wire netting and filling the voids between the boulders with stone not exceeding 18 cm in size tied with 8G galvanized tying wire at 30 cm apart, laid in position as directed including necessary local carriage of materials, paying necessary forest royalty including providing 1 (one) no. of jati bamboo horizontal runner along the top of the sausage with vertical bhaluka bamboo post 1.20 M apart driven at least 0.60 M below ground and tying with sausage etc, all complete as directed. ii) With River Boulder
210
9885
-
... More
Labour for dismantling of old CC work and stacking the spoils at suitable place including local carriage, complete as directed.
213.75
5506
-
... More
Supplying fitting fixing and laying reinforcement (TATA) in position in RCC work including cutting, bending, cranking with two piles 0.91 M (20 BWG) annealed wire hooking tying, complete as directed.
262.28
13127
-
... More
RCC work in slab, abutment cap and above abutment,pier cap, pedestal, dirt wall etc. in proportion 1:2:4 with hard river shingles of size 6 mm to 20 mm with proper reinforcement as per design including necessary curing, dewatering etc. with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
212.85
10488
-
... More
CC Work in lined canal in prop 1:2:4 with river shingles of size 6 mm to 20 mm free from dust, dirt and other foreign materials conforming to IS 2116-1965 and 542-1962 as specified by the department, water used for mixing the mortar should be free from all impurities including laying the concrete over the subgrade, moistened thoroughly by hand placing / mechanical placing in canal of not more than 3 M sides with suitable joints in between including providing bed sleepers (cast-in-situ or pre cast) under joints in between including providing all sealing materials as per design and drawing before laying concrete including finishing the surface smooth, clean of all impurities with curing the bed by manual labours and side by sprinkling for at least 28 days etc, complete as directed. (Proper arrangement for obtaining clean water should be made at site).
236.25
8643
-
... More
Carriage of boulders/gravels/metal screening, stacking in measurable stacks at site complete as directed . ( Av Distance = 25 km )
118.13
1103
-
... More
Earthwork in excavation trenches of walls, retaining walls, footing of columns, steps and septic tank including refilling (return filling) the quantity as necessary after completion of works, breaking clods in return filling, dressing, ramming, watering etc. and removal of surplus earth with all lead and lift upto 2 metre as directed and specified in following classification of soils, including bailing out of water where necessary upto depth below the existing ground level as mentioned in the approved drawing and complete as directed and specified.(A) In ordinary soil
378.4
700
-
... More
Earthwork in filling in Marginal bund / Guide bank / Afflux bund / Canal embankment etc. to the design section and grade by obtaining earth from outside borrow pits and filling in uniform layers not exceeding 15 cm thick including clearing light jungle, removing trees upto 15 cm dia and uprooting roots and stumps from the seat of embankment and borrow pit area, breaking clods not more than 10 mm cube, ramming, watering, dressing and roughening theseat of embankment, profiling etc. Paying compensation of earth borrowed from private or forest land if any, lead upto 30 M and lift upto 1.5 M, complete as directed.
544
498
-
... More
Centering and shuttering including propping etc where necessary and removal of forms after completion of CC and RCC works as directed complete. (Measurement to be taken on the face area timbered).
1364.18
548
-
... More
Labour charge for pitching with one man size boulder including dressing and ramming the seat to proper size and slope, pitching etc. with local carriage of boulders from a distance of 60 M with lift upto 3 M, complete as directed.
283.5
862
-
... More
Collection of one man size 25 cm to 30 cm hard river boulder including stacking in measurable stacks of not more than 1.00 M height at quarry site and complete as
directed.
473
1077
-
... More
Centering and shuttering including propping, nailing, bolting with earth oiling inside face etc and removal of forms after completion of CC and RCC works etc, complete as directed. (Measurement to be taken on the face area timbered). (Abutment / Return Wall / Piers / Pedestal etc.) (i) With 19 mm thick plyboard
971.27
978
-
... More
Earthwork in excavation for removal of sediment from bed of irrigation canal / river by head load to a safe distance including bailing out water, dressing the bed as directed for normal lead of 30 M and lift of 1.5 M.(Ordinary soil).
5246
289
-
... More
CC work in proportion 1:3:6 in foundation / abutment /piers / wing walls etc. with hard river shingles of size 13 mm to 38 mm including curing, bailing out water with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).
244.71
8395
-
... More
Repairing of Cross Regulator and Canal regulator Gates
-
-
-
... More
1st class brick work in cement mortar in abutment and wing wall, parapet wall etc, including racking out joints and curing etc, complete as directed.
70
13512
-
... More
Supply, Fabrication, Installation and Commissioning at site including painting of Shutter Assembly of Cross Regulator/ Head Regulator gates of different size made of 6 mm thick M.S. skin plate, with 10 mm dia. hole to be drilled at an interval of 150 mm apart on both the vertical sides and one horizontal side at the bottom at a fixed distance from the edge, and MS channel of size 100 mm x 50 mm x 4.7 mm or 125 mm x 65 mm x 5 mm for shutter frame, Horizontal girders and vertical stiffeners , fitting fixing of C.I. Guide Roller of size 75 mm x 67 mm x 100 mm x 20 mm having 25 mm dia hole with pin Guide roller M.S. bracket of size 90 mm x 90 mm x 250 mm made of 12 mm thick and 90 mm wide M.S. Flat with guide roller pin fitted on the shutter frame, having required slots and holes and supply, fitting and fixing of ‘J’ type rubber seal, of size 125 mm , ‘J’ type rubber seal corner of size 125 mm , with fabricated M.S. fastener of 50 mm width x 8 mm thick having 10 mm dia. hole at an interval of 150 mm apart for Regulator Gates complete as per design & drawing & as directed .B] C/Regulator & H/Regulator GATES OF SIZE less than 5.0 M2
34.5
36350
-
... More
Renovation of Canal System
-
-
-
... More
Earthwork in excavation for removal of sediment from bed of irrigation canal / river by head load to a safe distance including bailing out water, dressing the bed as directed for normal lead of 30 M and lift of 1.5 M.(Ordinary soil).
975
289
-
... More
Collection of one man size 25 cm to 30 cm hard river boulder including stacking in measurable stacks of not more than 1.00 M height at quarry site and complete as directed.
283.5
1077
-
... More
Downstream Protection at Headworks of Longa FIS
-
-
-
... More
Earthwork in filling in all soils in plinth, canal embankment and bed filling as per design section and grade by truck carriage for a minimum distance of 4 KM including paying compensation of earth obtained from private land if any loading, unloading, spreading the same including light jungle, removing trees upto 15 cm dia and uprooting roots and stumps etc. from the seat of the embankment, breaking clods not more than 10 mm cube, ramming, profiling etc. with all lift,complete as directed. (Payment will be made after deduction of 12.50 % shrinkage allowance from the gross quantity).
3922.57
847
-
... More
Carriage of boulders/gravels/metal screening, stacking in measurable stacks at site complete as directed . ( Av Distance = 25 km )
283.5
1103
-
... More
Supplying fitting fixing and laying reinforcement (TATA) in position in RCC work including cutting, bending, cranking with two piles 0.91 M (20 BWG) annealed wire hooking tying complete as directed.
187.91
13127
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%