Industries And Commerce Department Tender

ASSISTANT MANAGER, Size: 1500 W x 750 D x 750ht Specification: TABLE TOP- 25mm Thick Pre-Laminated Particle Board(PLPB) finished with 2mm thick PVC Edge Banding. SUPPORTS- Supported on 25mm thick Pre- Laminated Particle Board(PLPB) Gable Ends & 18mm thick Pre-Laminated Particle Board Modesty panel, with suitable spacers & levellers. Color: Table top- Walnut. Gable ends- Warm grey. Modesty Panel- Warm Grey. PEDESTAL UNITS Model: V-2D1F Size: 400 x 435 x 640 Ht Specification: Made of 18mm Thick Pre-Laminated Particle Board board with 2 Equal Drawer + 1 Filing Drawer arrangement. Castors are provided for easy mobility of the pedestal. Recessed Aluminium handles, central locking system & other necessary hardware are provided. Color: Body/ sides- Walnut. Facia- Warm grey. Handle: All recessed.

E O & H A' TABLES, Size: 1200 W x 750 D x 750ht Specification: TABLE TOP- 25mm Thick Pre-Laminated Particle Board(PLPB) finished with 2mm thick PVC Edge Banding. SUPPORTS- Supported on 25mm thick Pre- Laminated Particle Board(PLPB) Gable Ends & 18mm thick Pre-Laminated Particle Board Modesty panel, with suitable spacers & levellers. Color: Table top- Walnut. Gable ends- Warm grey. Modesty Panel- Warm Grey. PEDESTAL UNITS Model: V-2D1F Size: 400 x 435 x 640 Ht Specification: Made of 18mm Thick Pre-Laminated Particle Board board with 2 Equal Drawer + 1 Filing Drawer arrangement. Castors are provided for easy mobility of the pedestal. Recessed Aluminium handles, central locking system & other necessary hardware are provided. Color: Body/ sides- Walnut. Facia- Warm grey. Handle: All recessed.

SR. ASSISTANT & JR ASSISTANT TABLES, Size: 1200 W x 750 D x 750ht, Specification: TABLE TOP- 25mm Thick Pre-Laminated Particle Board(PLPB) finished with 2mm thick PVC Edge Banding. SUPPORTS- Supported on 25mm thick Pre- Laminated Particle Board(PLPB) Gable Ends & 18mm thick Pre-Laminated Particle Board Modesty panel, with suitable spacers & levellers. Color: Table top- Walnut. Gable ends- Warm grey. Modesty Panel- Warm Grey.

CONFERENCE TABLE , SIZE: 5400 x 1500 x 750 ht Specifications: Table top - 25mm thick Pre-laminated particle board finished with 2mm PVC edge lipping. Under Structure - Gable end and modesty panel. Wire Management - Vertrebra for wire uptake to MS cable tray from floor and 3 nos 300 mm aluminium flip up for switch access.

STORAGE FULL HEIGHT STORAGE , Size: 900 Wx 450D x 1800 HT Specification The structure is made out of 18mm Thick Pre-Laminated Particle Board The shelves are adjustable in height. The shutters are fitted with auto-closing hinges. Finger groove handles, central locking system, levellers & other necessary hardware are provided.

STORAGE Unit Specification The structure is made out of 18mm Thick Pre-Laminated Particle Board The shelves are adjustable in height. The shutters are fitted with auto-closing hinges. Recessed Aluminium handles, central locking system, levellers & other necessary hardware are provided. Color Body/ sides- Walnut. Facia- Warm grey. Handle: All recessed. VS 90120: Size: 900W x 450D x 1200HT

GENERAL MANAGER'S CHAIR, Base: The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress and strength. Tested prudently and rigorously as per astors - Twin Castors 50mm dia castors compling to ANSI / BIFMA X 5.1 – 2002 Gaslift: Class 4 tested -ANSI BIFMA performance standards Seating Structure: Seat and back is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Imported T-nuts and revited in to the wood Upholstery: Upholstery: Cushion with pre moulded foam of 50 - 60 density in the shape of plywood. Density -- 52 kg/m3 Hardness -- 12.6kgf at 25% Mechanism: Distinctively and characteristically designed tilt mechanism offering a very smooth and fluidic reclining motion with tension adjust knob and importantly offering seat to back recline ratio of 3:7, optimal for good back support.Multilock mechanism is fabricated from Sheets, undergo through CO2 welding process imparting uniform surface finish and tensile Sheets, undergo through CO2 welding process imparting uniform surface finish and strength. The components are processed with high degree of precision and care so as to assemble with other parts in perfect harmony to give smooth and effortless reclining experience. Tension springs are made out Grade II material conforming to Indian Standards. Also provided with release levers for locking mechanism and height adjustment of seat. Mechanism aides to operate the height adjustment, and has been equipped with 4 locking positions, back rest “ Return Prevention” function Back: Mesh fabric used for back upholstery With Unique Dynaflex Two Piece Back Construction , Dya Flex provides a comfotable cushioning that stimulates the spine & abdominal muscles to promote a healthy posture & back . Inbuilt body flex lumbar support that synchronises perfectly with your back in all positions of recline. Tension Control : Tension control is below Seat Armrest: Moulded polyurethene Arms confirming to IS 7078 with steel inserts for long life. One way adjustable - Height Adjustable. Fabric: Seat is duly upholstered with approved fabric.

GENERAL MANAGER'S VISITOR'S CHAIR. The frame is made out of 25.4mm tube of 16 gauge tube confirming to IS-7138-1973, Welded by Co2 welding process for uniform surface finish and higher tensile strength perforation on the sheet is of uniform 2.5mm dimension and gives good ventilation.Powdercoating: Thermo set powder coating epoxy polyester hybrids of harness (pencil) H.B.74 and impact resistant (in lab) 60-160 kgs cm and to a thickness of 40-50 microns is carried out of 7 step pretreatment process. Fasters: High quality metal screws and tension fasteners conforming to Hardness 38-44 and tensile strength – 1300 n/mm. IS 1363-196 Seating Structure: Seat is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Japanese Nagayama-nuts and revited in to the wood Upholstery: Cushion with pre moulded foam of 50 - 60 density in the shape of plywood. Density -- 52 kg/m3 Hardness -- 12.6kgf at 25% Armrest: This arms are made out of polypropylene injection moulding component which offers the smooth finishes and Scratch resistance Back: Mesh Back on Frames Fabric: Seat are duly upholstered with approved fabric

FM & CONFERENCE HEAD'S CHAIR, High back revolving chair High back revolving chair with head rest back for support. Back : Netted backrest for air circulation which can mould Adjustable lumber support Automatic backtilt tension adjustment based on user's body weight. Seat : Cushioned seat with soft PU (Poly Urethane) foam with best quality sweat absorbing cover. Aluminium metal 5 pronged pedestals Multi position locking with anti shock feature Adjustable seat height with Gas Lift Hydraluic system Armrest : Soft PU ( Poly Urethane) top with Saddle support & Height adjustment approx. dimesions : Width x Depth x Height: 76 cm x 76 cm x 100 - 109 cm Seat Height : 45 - 54 cm Overall Ergonomic design for office use.

ADCI/AM/ SI'S CHAIR, Base: The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress nd strength. Tested prudently and with bottom ribbing for additional buttress and strength. Tested prudently and rigorously as per ANSI/BIFMA X5. 1-2011 General Purpose Office Chair Standards Castors - Twin Castors 50mm dia castors compling to ANSI / BIFMA X 5.1 – 2002 Gaslift - Class 4 tested -ANSI BIFMA performance standards Seating tructure: Seat and back is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Imported T-nuts and revited in to the wood Upholstery: Cushion with pre moulded foam of 50 - 60 density in the shape of plywood. Density -- 52 kg/m3 Hardness -- 12.6kgf at 25% Mechanism: This mechanism is manufactured out of cold Rolled Carbon Steel IS 513-1994 Sheets,The steel components are manufactured with highly precision tools accuracy in matching other parts for smooth functioning. The steel components are fabricated by using Co2 welding process for giving uniform surface finish with higher tensile strength. Springs are made out of Grade II material. Composite release levers for locking mechanism & Gas lift height adjustment. Release lever mechanism for Locking and Gas lift height adjustment. Headrest: Adjustable Headrest Back: Back Frame is upholstered with Thinner Mesh Adjustable Lumbar Support Allows you to adjust the lumbar support position for good back support and blood circulation Armrest: Moulded self skinned polyurethene Arms confirming to IS 7078 with steel insets for long life. one way adjustable - Height Adjustable. Tension Control : Tension control is below the Seat Fabric: Seat are duly upholstered with approved fabric.

EO / HA'S CHAIR, Fixed Arms, Base: The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress and strength. Tested prudently and rigorously as per ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards Castors: Twin Castors 50mm dia castors compling to ANSI /BIFMA X 5.1 – 2002 Gaslift - Class 4 tested -ANSI BIFMA performance standards Seating Structure: Seat is made out of 12mm molded hot pressed plywood in ergonomic shape fitted withImported T - nuts and revited in to the wood Upholstery: Upholstery: Cushion with pre moulded foam of 50 - 60 density in the shape of plywood. Density -- 52 kg/m3 Hardness -- 12.6kgf at 25% Back: Moulded Polypropylene back with netted fabric upholstred Armrest: These arms are made out of polypropylene injection molding component which offers the smooth finishes and Scratch resistance. Fixed Arms Fabric: Seat are duly upholstered with approved fabric

SR. ASSISTANT & JR ASSISTANT CHAIR, Frame: The frame is made out of 25.4mm tube of 16 gauge tube confirming to IS-7138-1973, Welded by Co2 welding process for uniform surface finish. Powdercoating: Thermo set powder coating epoxy polyester hybrids of hardness (pencil) H.B.74 and impact resistant (in lab) 60-160 kgs cm and to a thickness of 40-50 microns is carried out of 7 step pretreatment process.Fasteners: High quality metal hardware conforming to Hardness 38-44 and tensile strength – 1300 n/mm. IS 1363-1967Seating Structure: Seat is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Japanese T-nuts and riveted into the plywood Upholstery:Upholstery: Cushion with pre moulded foam of 50 - 60 density in the shape of plywood. Density -- 52 kg/m3 Hardness -- 12.6kgf at 25% Armrest: Polypropylene injection moulded armrests - Fixed Arms Back: Mesh Back on Frame. Fabric: Seat are duly upholstered with approved fabric.

VISITOR'S CHAIR, Legs:Powdercaoted 4 Legs, Back: Tinner Mesh Back Seating Structure: Seat is made out of 12mm molded hot pressed plywood in ergonomic shape fitted withImported T - nuts and revited in to the wood Upholstery: Upholstery: Cushion with pre moulded foam of 50 - 60 density in the shape of plywood. Density -- 52 kg/m3 Hardness -- 12.6kgf at 25% Back: Moulded Polypropylene back with netted fabric upholstred Armrest: These arms are made out of polypropylene injection molding component which offers the smooth finishes and Scratch resistance. Fixed Arms Fabric: Seat are duly upholstered with approved fabric

SOFA, Two Seater Sofa Base: Stainless steel SEAT: Made of timber frame inside, srping and the rubber string ,35 density cushion at seat. BACK: Made of timber frame inside and rubber string , 30 density cushion at back, leatherette sofa. SOFA HEIGHT : 790 mm SOFA WIDTH : 1362 mm SOFA DEPTH : 780 mm

SOFA, Single Seater Sofa Base: Stainless steel SEAT: Made of timber frame inside, srping and the rubber string ,35 density cushion at seat BACK: Made of timber frame inside and rubber string , 30 density cushion at back, leatherette sofa. SOFA HEIGHT: : 790 mm SOFA WIDTH: : 880 mm SOFA DEPTH: : 780 mm

CENTER TABLE Rectangular Table Glass top Chrome frame Size: 1200 x 600 mm