Indian Army Tender

CATEGORY: Flat Brushes for Paints and Varnishes for Heavy Duty as per IS 384 (Part 1) (Q3) , Thinner For Epoxy Paints (BHEL) (Q3) , Enamel, Synthetic, Exterior (A) Under Coating (B) Finishing Paint (V3) Confirming to IS 2932 (Q3) , Plywood IS 303 BWR of size 8 ft by 4 ft by 8mm , Plywood IS 303 BWR grade of size 7 ft by 3 ft by 12mm 7 ply , Mirror for table dressing gents 5 point 5 mm thick size 366mm by 1820 mm , Foam 7 ft by 6 ft by 4 inch 40 density , Plywood BWR 2400 mm by 1200 mm by 12 mm , Well seasoned 2nd class Hard Wood scantling of Size 90mm by 35mm by 2000mm , Plywood one side teak face BWR grade of size 8 ft by 4 ft by 4 mm , Plywood IS 303 BWR grade of size 8 ft by 4 ft by 18 or 19 mm , Foam Cushion 100MM thick size 53 by 50cm 40 density covered with tapestry cloth , Wood Screw 15 mm , Hard wood well seasoned 10 Feet by 3 inch by 2 inch , Pre laminated MDF Board with one side teak face of size 8 ft by 4 ft by 18mm , Tapping Screw Type C 32 mm , Particle Board pre laminated with one teak face 8 ft by 4ft by 18 or 19mm , Cloth tapestry 48 inch wide 600 gsm , Cane plastic 2mm , Varnish , Block board 8 ft by 4 ft by 9mm , Wood Screw 65 mm , Cane plastic 4mm , Hydraulic base for chair , Elbow GI 3 way 32mm , Beading teak wood half round 9mm thick by 18 or 19mm wide 7 ft long , Wood Screw MS 25mm , Fevicol SH , Continuous Piano Hinges 18mm by 1 point 8mtr , Newar Nylon 50 or 55mm wide , MS Angle iron of size 100 by 100 by 5mm , Wood screw MS 50 mm , Lock for Almirah 6 lever , Shellac Chash , Screw nut and bolt MS complete set 75mm for charpoy , Nails wire 80mm , Seat for chair steel wo arms , Nails wire 100mm , PVC shoes for chair verandah , Handle for almirah med 100mm steel , Wood Screw MS 20 mm , MS pins 20 mm , French polish , Tapestry cloth cover only for cushion 530 by 500 by 100mm with Zip , Nut bolt 6mm by 75mm 100 Nos in a pkt , Hexagon Nut 32mm , Caster wheel for revolving chair , Wood Screw 40mm , Nails of size 2 point 5 inch , Lock small for almirah , Nails wire 20mm , MS Screw wood 75mm by 10mm , Turkey umber powder , Nails Iron 1 inch , Grinder paper , MS panel pin , Raw sienna powder Yellow Powder , Emery paper No 80 , Nails of size 2 inch , Hard Wood 2nd class well seasoned beading of size 6mm thick 20mm wide and 7ft long , Nails of size 1 point 5 inch , Plywood BWR 8 ft by 4 ft by 6mm thick , Chass , Foam 6mm thick of size 6 ft by 3 ft , Seat and back for chair for CB Steel , Wheel base for chair computer revolving complete with 5 nos wheel , Sunmika 2400 mm by 1200 mm by 1mm , Wooden beading of 20mm thick , Handle arm rest for chair visitor , PVC shoes sqaure type , Wooden arm rest for chair CB steel , Handle arm rest for chair computer revolving , Turpentine Oil , PVC shoes round type heavy type , Stainless steel wood screw 10 by 7 , Hydraulic with cast base frame chair revolving 120mm , Fevicol Type B 1000 grams paper adhesive or Liquid gum , Sand paper No 100