Guwahati Smart City Limited Tender
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Guwahati Smart City Limited - GSCL Tender
Civil And Construction
Civil Works Others
Building Construction
Eprocure
Opening Date1 Oct 2021
Closing Date1 Nov 2021
Tender Amount₹ 14,02,92,367
Costs
EMD
₹ 31,53,000Document Cost
₹ 3,500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_GSCT_23100_1Bid Award Id
ViewTender No
SPV/GSCL/DEV/142/2020/29Tender Authority
Guwahati Smart City Limited ViewPurchaser Address
-Website
http://https://gscl.assam.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Notice Inviting Tender for Development of Umananda Temple at Peacock Island, Brahmaputra River, Guwahati
RFP documents for Development of Umananda Temple, Peacock Island at Brahmaputra River, Guwahati
BOQ Items
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
-
-
-
All kinds of soil
1739.37
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
554.91
-
-
SITE GRADING WORKS
-
-
-
Excavation work by mechanical means (Hydraulic excavator)/ manual means in
foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.
-
-
-
Ordinary rock
10
-
-
SITE DEVELOPMENT WORKS
-
-
-
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
4120
-
-
DISMANTLING AND DEMOLISHING WORKS
-
-
-
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
10
-
-
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
5
-
-
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
15
-
-
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material
within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
In cement mortar
5
-
-
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of
unserviceable material within 50 metres lead as per direction of Engineer-in-charge :
-
-
-
In cement mortar
5
-
-
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material
within 50 metres lead :
-
-
-
Of sectional area 40 square centimetres and above
2.5
-
-
Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in:
-
-
-
R.S. Joists
250
-
-
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding
etc. including dismembering and stacking within 50 metres lead.
5850
-
-
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
-
-
-
For thickness of tiles 10 mm to 25 mm
25
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
26
-
-
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
-
-
-
G.S. Sheet
125
-
-
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
-
-
-
Of area 3 sq. metres and below
20
-
-
Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.
25
-
-
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :
-
-
-
15 mm to 40 mm nominal bore
25
-
-
PCC WORKS
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)
385.52
-
-
RCC WORK
-
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
-
-
-
All works upto plinth level
-
-
-
Concrete of M25 grade with minimum cement
content of 330 kg /cum
432.57
-
-
All works above plinth level to all level.
-
-
-
Concrete of M25 grade with minimum cement
content of 330 kg /cum
513.39
-
-
DPC WORK
-
-
-
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
276.36
-
-
SHUTTERING AND FORM WORK
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
2097.73
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts
754.64
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers
887.56
-
-
Suspended floors, roofs, landings, balconies and access platform
574.98
-
-
Walls (any thickness) including attached pilasters, butteresses, plinth and string
courses etc.
1485.9
-
-
Stairs, (excluding landings) except spiral-staircases
177.16
-
-
Arches, domes, vaults, inclined slab up to 6 m span
300.43
-
-
BRICK WORK
-
-
-
Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.
3082.71
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
Cement mortar 1:4 (1 cement : 4 coarse sand)
854.87
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all levels in all shapes and sizes in :
-
-
-
Cement mortar 1:4 (1 cement : 4 coarse sand)
148.89
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all levels
-
-
-
Cement mortar 1:4 (1 cement :4 coarse sand)
680.4
-
-
IRON AND STEEL WORK
-
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all levels.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
87343.13
-
-
FLOORING
-
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
-
-
-
Size of Tile 500x500 mm
182.6
-
-
ANTISKID TILES
-
-
-
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required
thickness, leveling system and rubber mallet for placing the tiles gently and easily.
-
-
-
Glazed Vitrified tiles Matt/Antiskid finish of size
-
-
-
Size of Tile 600 x 600 mm
26.54
-
-
POLISHED KOTA STONE INTERNAL FLOORING
-
-
-
Kota stone slabs 20 mm thick in flooring and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and
jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
63.34
-
-
GRANITE WORKS FOR SLAB
-
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
-
-
-
Granite stone slab colour black, Cherry/Ruby red
-
-
-
Area of slab upto 0.50 sqm
76.68
-
-
GRANITE MOULDING
-
-
-
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
-
-
-
Granite work
286.1
-
-
TUNCH BRICK FOR WALL CLADDING
-
-
-
Providing Tunch Brick wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey /Sika /Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department).
-
-
-
TBCL 636A-Rubigo
149.52
-
-
TBCL 636b- Kingsport
170.75
-
-
WALL TILES
-
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
99.05
-
-
OMI'S PAVERS
-
-
-
Providing polished Omi's Interlocking premium paving- Pavers Concrete, pavers Block made of cement concrete of grade not less than M-35 with coloured pigmented top layer of 8mm made out of strong vibratory compaction with reflective surface made in PVC modified rubber moulds blocks of approved quality ,size, shape and specified thickness over a levelling bedding layer of 30mm compacted sand over a base course of WBM or PCC ( Base course to be paid separately) including cutting where necessary finished with spreading sweeping jointing sand and compacting the pavers using vibrating compactor as specified and directed.
-
-
-
From Primary Source: (i) OMI's Interlocking Pavers-60mm
-
-
-
Premium Range: Casaroc, Antique, Flagstone, Bentona, Cobble square, Flexit, Ecoloc, Ebro, Flexit-Duo, Flexit- Trio of 60mm thickness.
2230.64
-
-
DHOLPUR STONE FLOORING
-
-
-
Dholpur-stone slab flooring of 18 mm thick over 20mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
-
-
-
550mm x 550mm and above
145.41
-
-
ENDURA HIGH TRAFFIC (IVORY/TERRACOTA)
-
-
-
Providing Johnson Endura High Traffic (Ivory /Teracotta) floor tiles of approved quality of specified size, shape and thickness not less than 10mm on floors, skirtings, risers and treads of steps over 12 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey /Sika /Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)
-
-
-
size 300mm x 300mm
1349.37
-
-
ENDURA STEPPING STONE
-
-
-
Providing Johnson Endura stepping stone tiles , thickness not less than 12mm of approved quality of specified size, shape and thickness not less than 10mm on floors, skirtings, risers and treads of steps over 12 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey /Sika /Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)
-
-
-
Size 950x300
400.48
-
-
ENDURA STEPPING STONE
-
-
-
Providing Johnson Endura meteor stepping stone tiles thickness not less than 15mm of approved quality of specified size, shape and thickness not less than 10mm on floors, skirtings, risers and treads of steps over 12 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey /Sika /Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)
-
-
-
Size 1200x300
323.9
-
-
ENDURA METEOR RISER / LANDING
-
-
-
Providing Johnson Endura meteor riser landing tiles , thickness not less than 12mm of approved quality of specified size, shape and thickness not less than 10mm on floors, skirtings, risers and treads of steps over 12 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey /Sika /Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)
-
-
-
Size 950X600
226.87
-
-
ENDURA METEOR RISER/ LANDING
-
-
-
Providing Johnson Endura meteor riser / landing tiles, thickness not less than 15mm of approved quality of specified size, shape and thickness not less than 10mm on floors, skirtings, risers and treads of steps over 12 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey /Sika /Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)
-
-
-
Size 1200x600
1193.8
-
-
KERB STONE
-
-
-
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineerin-
charge).
570.74
-
-
PLASTERING
-
-
-
12 mm cement plaster of mix :
-
-
-
1:4 (1 cement: 4 fine sand)
3553.72
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix :
-
-
-
1:4 (1 cement: 4 fine sand)
3577.03
-
-
Neat cement punning
54.41
-
-
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.
-
-
-
18 mm thick
564
-
-
WALL PUTTY
-
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2728.67
-
-
PAINTING
-
-
-
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour
-
-
-
Two coats
1452.83
-
-
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.
-
-
-
With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
1476.67
-
-
Applying priming coat:
-
-
-
With ready mixed pink or Grey primer of approved brand and manufacture on
wood work (hard and soft wood)
93.24
-
-
Painting wood work with Deluxe Multi Surface Paint of required shade. Two ormore coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture
93.24
-
-
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
11913.44
-
-
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two
or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
11913.44
-
-
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
-
-
-
On steel work
250
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
-
-
-
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
4890.45
-
-
DOOR FRAME
-
-
-
WOOD WORK
-
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
-
-
-
With sal wood
0.99
-
-
DOOR WORKS
-
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)
decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
-
-
-
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
46.63
-
-
WINDDOWS
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
For fixed portion
-
-
-
Anodised aluminium (anodised transparent or dyed to required shade accordingto IS: 1868, Minimum anodic coating of grade AC 15)
491.33
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
41.8
-
-
HARDWARE FITTINGS
-
-
-
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :
-
-
-
300x16 mm
5
-
-
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :
-
-
-
250x10 mm
36
-
-
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
-
-
-
125 mm
52
-
-
Providing and fixing bright finished brass door latch with necessary screws etc. complete :
-
-
-
300x16x5 mm
1
-
-
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
10
-
-
ROOF TREATMENT
-
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
-
-
-
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment
-
-
-
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by
Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
-
-
-
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
-
-
-
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep
-
-
-
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
-
-
-
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
77.5
-
-
STONE MASONARY WORKS
-
-
-
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
441.15
-
-
Coursed rubble masonry (first sort) with hard stone in foundation and plinth with :
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
722.6
-
-
ANTITERMITE TREATMENT
-
-
-
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
354.49
-
-
PLINTH PROTECTION
-
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
124.1
-
-
MS GRATING
-
-
-
Providing fitting and fixing of MS grating of required patern for drain cover with MS flats/ square bars at required spacing in frame all round with MS angle all complete.
6282.27
-
-
M.S RAILING
-
-
-
Providing and fixing M.S. Railing of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
-
-
-
Fixed to Brickwork /P.C.C /R.C.C.
178798.9
-
-
S.S RAILING
-
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of
waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members
shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
486
-
-
M.S LOUVERS
-
-
-
Providing and fixing M.S. louvers of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
-
-
-
Fixed to Brickwork /P.C.C/R.C.C.
76.59
-
-
STEEL STAIRCASE
-
-
-
Steel Staircase work riveted and/ or bolted/ riveted in built up sections, frame work including cutting, hoisting, fixing in position and applying a priming coat of red- lead paint up to 4.6m height above plinth including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed.
-
-
-
In single stanchions (columns) composed of R.S.J. or channels with caps, bases, splices, angle brackets etc.
31250
-
-
WATER TREATMENT PLANT
-
-
-
Supply, installation & commissioning of AQUATECH Mild Steel(8mm) Iron Removal Water Filter of 10000 GPH, size- 3000mm height X 2500mm dia, including MS 4” frontal pipeline with 5 nos. of valves for backwash, rinse, bypass, filtration, etc., vacuum breaker ,PVC Strainers, Bed plate, Top/Bottom Dish-end, anti corrosive bituminous painted inside, pressure gauge(2nos.), Hand hole. Media- Anthracite, Coarse Sand, Grit, Gravels & Pebbles with required parts & fittings.
1
-
-
Supply, installation & commissioning of AQUATECH Mild Steel(8mm) Oxidisation Chamber size- 800mm dia X 1200mm height. Media- Mno2 Lumps and Gravels with required parts & fittings.
1
-
-
Air Compressor for proper aeration including pump.
1
-
-
Automatic Chlorine Dosing Pump with 200 ltrs HDPE tank including accessories.
1
-
-
HORTICULTURE WORKS:
-
-
-
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with
sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
1236
-
-
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.
300
-
-
Fine dressing of the ground.
4120
-
-
Supplying & Stacking of Selection No.1/doob grass at site fresh & free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.
300
-
-
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water)
-
-
-
Shrubs Plant
700
-
-
Hedge Plant /Ground cover
500
-
-
TREE PLANTS
-
-
-
Providing and stacking of Acacia auriculiformis of ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge.
10
-
-
SHRUBS
-
-
-
Providing and stacking of Bauhinia tomentosa (yellow) of height 60-75 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge.
250
-
-
Providing and stacking of Caesalpinia pulcherrima species of height 45-60 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge.
250
-
-
CREEPER PLANTS
-
-
-
Providing and stacking of Allamanda cathartica of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
10
-
-
Providing and stacking of Allamanda violacea of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge.
10
-
-
SANITARY
-
-
-
Wash Basin
-
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require
-
-
-
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
4
-
-
KITCHEN SINK
-
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
Kitchen sink with drain board
-
-
-
510x1040 mm bowl depth 250 mm
4
-
-
Towel Ring
-
-
-
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
4
-
-
Towel Rail
-
-
-
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
-
-
-
450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
3
-
-
Soap Dish
-
-
-
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
8
-
-
Mirror
-
-
-
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
-
-
-
Circular shape 450 mm dia
4
-
-
Pillar Cock
-
-
-
Providing and fixing PTMT pillar cock of approved quality and colour.
-
-
-
15 mm nominal bore, 107 mm long, weighing not less than 110 gms
4
-
-
Bib Cock
-
-
-
Providing and fixing brass bib cock of approved quality :
-
-
-
15 mm nominal bore
15
-
-
GRATING
-
-
-
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
Circular type
-
-
-
100 mm nominal dia
13
-
-
Stop Cock
-
-
-
Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms
14
-
-
INDIAN TYPE WATER CLOSET
-
-
-
Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and
fixtures complete, including cutting and making good the walls and floors wherever required:
-
-
-
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
6
-
-
SHOWER
-
-
-
Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms
3
-
-
Piping
-
-
-
Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge.
-
-
-
Concealed work, including cutting chases and making good the wall etc.
-
-
-
1216 (16 mm OD) pipe
58.5
-
-
1620 (20 mm OD) pipe
68.5
-
-
2025 (25 mm OD) pipe
5
-
-
2532 (32 mm OD) pipe
8
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
-
-
-
External work
-
-
-
65 mm nominal inner dia Pipes
45
-
-
50 mm nominal outer dia Pipes
362
-
-
40 mm nominal outer dia Pipes
900
-
-
80 mm nominal outer dia Pipes
12
-
-
100 mm nominal inner dia Pipes
12
-
-
Providing and fixing gun metal non- return valve of approved quality (screwed end) :
-
-
-
80 mm nominal bore
-
-
-
Horizontal
10
-
-
Vertical
15
-
-
50 mm nominal bore
-
-
-
Horizontal
20
-
-
Vertical
15
-
-
40 mm nominal bore
-
-
-
Horizontal
10
-
-
Vertical
15
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
15 mm nominal outer dia Pipes
225
-
-
20 mm nominal outer dia Pipes
353.5
-
-
25 mm nominal outer dia Pipes
151
-
-
32 mm nominal outer dia Pipes
12
-
-
WATER TANK:
-
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
11000
-
-
MANHOLE COVER :
-
-
-
Supplying and fixing C.I. cover without frame for manholes :
-
-
-
455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg
12
-
-
SIGNAGES
-
-
-
Supplying, Fitting and Fixing of the Signages of required sizes write up as necessary.
-
-
-
Internal Directional Signage with installation
-
-
-
OR 4mm PVC with printing
10
-
-
External Signage with History
-
-
-
OR 5mm PVC with printing
10
-
-
Pole with site erection
5
-
-
MURAL WORKS
-
-
-
Providing, making,Fitting and Fixing of fiber glass mural with clay modeling, POP modeling and fiber casting as per the approved design with fiber
23
-
-
SITTING BENCHES:
-
-
-
Providing, Supplying and placing at site Sitting Benches of required make design. Materials & design should be approved by the department and concerned Architect.
12
-
-
COLOUR CODED GARBAGE BINS:
-
-
-
Supplying, Fitting and Placing of Colour coded Garbage Bins
20
-
-
INTERNAL ELECTRIFICATION
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required
-
-
-
Group A
24
-
-
Group B
38
-
-
Group C
88
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
15
-
-
Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) cable in surface/ recessed PVC 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system.
-
-
-
With 3 x 1.5 sq. mm. cable in 20 mm dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit
480.13
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
160
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
758
-
-
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
20
-
-
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
1 or 2 Module (75mmX75mm)
3
-
-
3 Module (100mmX75mm)
27
-
-
4 Module (125mmX75mm)
4
-
-
6 Module (200mmX75mm)
1
-
-
8 Module (125mmX125mm)
12
-
-
12 Module (200mmX150mm)
11
-
-
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
133
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
5/6 A switch
27
-
-
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
31
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
5/6 A switch
156
-
-
15/16 A switch
6
-
-
3 pin 5/6 A socket outlet
68
-
-
6 pin 15/16 A socket outlet
6
-
-
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
67
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
30
-
-
Double pole
1
-
-
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
-
-
-
4 way (4 + 12), Double door
2
-
-
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
63A
2
-
-
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
4
-
-
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
100
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
Upto 35 sq. mm
50
-
-
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
10
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
3 X 10 sq. mm (22mm)
2
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way , Double door
1
-
-
Sypply installation testing commissioning Surface mounted downlighters 12W LED of Phillips make cat no.SM250C LED 12S 6500 PSU WH or equivalent make including connection complete.
53
-
-
Sypply installation testing commissioning Surface mounted sopt light 12W LED of Phillips make cat noDN 311B LED 12S 5000PSR MB WH or equivalent make including connection complete.
12
-
-
Sypply installation testing commissioning Surface mounted Mini Flood/Spot light 40W LED of Phillips make cat no ST 271T LED 40/840 PSU E MB IC WHor equivalent make including connection complete.
4
-
-
Sypply installation testing commissioning Surface mounted Suspended light 22W LED of Phillips make cat noSP811X LED 22S 6500 PSU W6L120OD SI or equivalent make including connection complete.
1
-
-
Sypply installation testing commissioning Surface mounted Batten light 22W LED of Phillips make cat no BN021C LED20S PSU CW GR S2or equivalent make including connection complete.
31
-
-
Supplying including fitting fixing of Energy saving ( 5 Star)1200mm sweep A.C. Ceiling fan (Havells make) model 'ES Neo' or equivalent ,complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator].
32
-
-
Sypply installation testing commissioning Surface mounted Wall light 18W LED of Phillips make cat noWT140WLED7S NW PSUS1 PC or equivalent make including connection complete.
21
-
-
Supply of one number PVC insulated and PVC sheathed / XLPE Armoured Aluminium power cable of 1.1 KV grade of following size
-
-
-
4 Core , 10Sq.mm
50
-
-
Supplying including fitting fixing of high speed 230mm sweep following A.C. Exhaust fan (Havells make) model 'Ventil Air DB ' or equivalent in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.
26
-
-
EXTERNAL ELECTRIFICATION
-
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
Upto 35 sq. mm
1450
-
-
Above 35 sq. mm and upto 95 sq. mm
100
-
-
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
50
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
2 X 6 sq. mm (19mm)
5000
-
-
3 X 10 sq. mm (22mm)
50
-
-
3½ X 50 sq. mm (35mm)
10
-
-
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
20
-
-
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
1200
-
-
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
-
-
-
100 A,30KA,FPMCCB
10
-
-
125 A,36KA,FPMCCB
1
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
72
-
-
Supply , installation testing commisioning of 20W Solar land scape LED Post Top light of Havells make with model name 'Manor' or equivalent make with programmed dimming option including PCC base foundation and 6mtr pole complete with connection as required.
86
-
-
Supply , installation testing commisioning of 4W 1mtr hight Solar LED Bollard light similar to Havells make with model name 'NO-Urban'' or equivalent make with programmed dimming option including PCC base foundation and complete with connection as required.
20
-
-
Supply , installation testing commisioning of 4W 1mtr Solar LED wall/step light similar to Havells make with model name 'No-GLITZO'' or equivalent make with programmed dimming option complete including connection as required.
178
-
-
Supply , installation testing commisioning of 100W Solar land scape LED Street light of Havells make with model name 'Alpha' or equivalent make with programmed dimming option including PCC base foundation and 6mtr pole complete with connection as required.
10
-
-
Supply installation testing commissioning of Solar off grid Power Plant with PCU ,Battery, and all accessories complete including connection to give power of the following capacity
-
-
-
2KW
1
-
-
3KW
2
-
-
5KW
4
-
-
Supply of 35KVA/28KW Jakson silent DG set comprising of Cummins Diesel Engine model X3.6TAAG1 developing 52.4BHP radiator cooled at 1500rpm coupled to suitable capacity Stamford make alternator 415 V, 3phase, 4 wire, 50 cycles, 0.8 pf (lag) both mounted on MS channel base frame, complete with 90 ltrs capacity fuel tank, battery with leads, AMF Control Panel, residential silencer, AVM pads, lube oil, coolants enclosed in Acoustic Enclosure as per CPCB-2 norms.
-
-
-
KVA- PHASE- Approx size
-
-
-
35KVA 3Ph 2800x1150x1450
1
-
-
Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical outdoor type double door, floor mounting compartmentalize panel board of size 0.85M X 1.20MX 0.40M made of 16 SWG/1.66 mm thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom and C.R. sheet roofing on the top. The panel board is to be erected in 1 : 3 : 6 PCC foundation including excavation of trench and brick soling etc. complete neatly Wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 4nos DP or TPN out going as specified and directed by the deptt. confirming to IP 65 protection comprising of the following electrical items:
-
-
-
1. 25mm X 5mm 4 strip copper Bus-Bar 1.0 M length each
-
-
-
2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no
-
-
-
3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no
-
-
-
4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue - 3 no
-
-
-
5. Voltmeter & Ammeter Selector Switch - 2 no
-
-
-
6. 2 A Slide fuse unit - 3nos
-
-
-
(Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately)
6
-
-
Supply of one number PVC insulated and PVC sheathed / XLPE Armoured Aluminium power cable of 1.1 KV grade of following size
-
-
-
3 Core , 4 Sq.mm
450
-
-
3 Core ,6 Sq.mm
800
-
-
4 Core , 10Sq.mm
200
-
-
3.5Core,50Sq.mm
100
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements