Guwahati Metropolitan Development Authority Tender
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Guwahati Metropolitan Development Authority - GMDA Tender
Housekeeping Services
Eprocure
Opening Date26 May 2022
Closing Date6 Jul 2022
Tender Amount₹ 3,76,66,743
Costs
EMD
₹ 7,54,335Document Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Beautification Of Geeta Mandir Campus And Its Surrounding Areas Part 1 And 2)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_GMDA_25732_1Bid Award Id
ViewTender No
GMDA/DEV/50/2021/36Tender Authority
Guwahati Metropolitan Development Authority ViewPurchaser Address
-Website
http://https://gmda.assam.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Demolishing brick work manually/ by mechanical means including
stacking of serviceable material and disposal of unserviceable material
within 50 metres lead as per direction of Engineer-in-charge.
In cement mortar
152.51
-
-
... More
Dismantling tile work in floors and roofs laid in cement mortar including
stacking material within 50 metres lead.
For thickness of tiles 10 mm to 25 mm
757.5
-
-
... More
EARTH WORK
Earth work in excavation by mechanical means (Hydraulic excavator)/
manual means over areas (exceeding 30 cm in depth, 1.5 m in width as
well as 10 sqm on plan) including getting out and disposal of excavated
earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
All kinds of soil
128.06
-
-
... More
CONCRETE WORK
1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural
sources : 4 graded stone aggregate 40 mm nominal size
derived from natural sources)
95.49
-
-
... More
REINFORCED CEMENT CONCRETE
CAST IN SITU
Reinforced cement concrete work in walls (any thickness), including
attached pilasters, buttresses, plinth and string courses, fillets, columns,
pillars, piers, abutments, posts and struts etc. above plinth level up to
floor five level, excluding cost of centering, shuttering, finishing and
reinforcement :
5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural
sources : 3 graded stone aggregate 20 mm nominal size
derived from natural sources)
6.23
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs
having slope up to 15° landings, balconies, shelves, chajjas, lintels,
bands, plain window sills, staircases and spiral stair cases above plinth
level up to floor five level, excluding the cost of centering, shuttering,
finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse
sand(zone-III) derived from natural sources : 3 graded stone aggregate
20 mm nominal size derived from natural sources).
119.03
-
-
... More
STEEL REINFORCEMENT
Steel reinforcement for R.C.C. work including straightening, cutting,
bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
1039.89
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting,
bending, placing in position and binding all complete above plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
2158.66
-
-
... More
FORM WORK
Centering and shuttering including strutting, propping etc. and removal
of form for
Foundations, footings, bases of columns, etc. for mass
concrete
12.76
-
-
... More
Suspended floors, roofs, landings, balconies and access
platform
103.78
-
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
95.27
-
-
... More
Extra for additional height in centering, shuttering where ever required
with adequate bracing, propping etc., including cost of de-shuttering
and decentering at all levels, over a height of 3.5 m, for every additional
height of 1 metre or part thereof (Plan area to be measured).
Suspended floors, roofs, landing, beams and balconies
(Plan area to be measured)
103.78
-
-
... More
MASONRY WORK
Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth in:
Cement mortar 1:4 (1 cement : 4 coarse sand)
114.35
-
-
... More
CEMENT PLASTER (IN FINE SAND)
12 mm cement plaster of mix :
1:4 (1 cement: 4 fine sand)
272.08
-
-
... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area
2.5 sq.meters and under, including cutting the patch in proper shape,
raking out joints and preparing and plastering the surface of the walls
complete, including disposal of rubbish to the dumping ground, all
complete as per direction of Engineer-in-Charge.
With cement mortar 1:4 (1cement: 4 coarse sand)
4173.94
-
-
... More
Providing and applying plaster of paris putty of 2 mm thickness over
plastered surface to prepare the surface even and smooth complete.
4446.02
-
-
... More
Applying one coat of water thinnable cement primer of approved brand
and manufacture on wall surface :
Water thinnable cement primer
4446.02
-
-
... More
Finishing walls with textured exterior paint of required shade :
New work (Two or more coats applied @ 3.28 ltr/10 sqm)
over and including priming coat of exterior primer applied
@ 2.20kg/10 sqm
1664.08
-
-
... More
Wall painting with acrylic emulsion paint of approved brand and
manufacture to give an even shade :
Two or more coats on new work
2781.94
-
-
... More
Applying priming coat:
With ready mixed pink or Grey primer of approved brand
and manufacture on wood work (hard and soft wood)
146.06
-
-
... More
Finishing with Deluxe Multi surface paint system for interiors and
exteriors using Primer as per manufacturers specifications :
Two or more coats applied on walls @ 1.25 ltr/10 sqm
over and including one coat of Special primer applied @
0.75 ltr /10 sqm
146.06
-
-
... More
Providing and laying machine cut, mirror polished, Italian Marble stone
flooring laid in required pattern in linear portion of the building all complete
as per architectural drawings, with 18 mm thick stone slab laid over 20
mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse
sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including
pointing with white cement slurry admixed with pigment to match the
marble shade including rubbing, curing and polishing etc. all complete
as specified and as directed by the Engineer-in-Charge.
18 mm thick Italian Marble stone slab, Perlato, Rosso verona,
Fire Red or Dark Emperadore etc.
519.45
-
-
... More
12 mm cement plaster finished with a floating coat of neat cement of
mix :
1:4 (1 cement: 4 fine sand)
502.8
-
-
... More
Providing and laying in situ seven course water proofing treatment
with APP (Atactic Polypropylene) modified Polymeric memberane
over roof consisting of first coat of bitumen primer @ 0.40 litre per
sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 kg/sqm,
which shall consist of blown type bitumen of grade 85/25 conforming
to IS : 702, 3rd and 5th layers of roofing membrane APP modified
Polymeric membrane 2.0 mm thick of 3.00 Kg/sqm weight consisting
of five layers prefabricated with centre core as 100 micron HMHDPE
film sandwiched on both sides with polymeric mix and the polymeric
mix is protected on both side with 20 micron HMHDPE film. 7th, the
top most layer shall be finished with brick tiles of class designation
10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed
with 2% integral water proofing compound by weight of cement over
a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) and
finished neat (item of laying brick tiles shall be paid for separately).
886
-
-
... More
Providing, mixing and applying bonding coat of approved adhesive
on chipped portion of RCC as per specifications and direction of
Engineer-In-charge complete in all respect.
Epoxy bonding adhesive having coverage 2.20 sqm/kg
of approved make
2928
-
-
... More
Extra for covering top of membrane with Geotextile, 120 gsm non
woven, 100% polyester of thickness 1 to 1.25 mm bonded to the
membrane with intermittent touch by heating the membrane by Butane
Torch as per manufactures recommendation.
432
-
-
... More
Repair, Painting and window replacement for Library and Rest House Building
-
-
-
... More
CIVIL WORKS
-
-
-
... More
Dismantling tile work in floors and roofs laid in cement mortar including
stacking material within 50 metres lead.
For thickness of tiles 10 mm to 25 mm
83.23
-
-
... More
EARTH WORK
Earth work in excavation by mechanical means (Hydraulic excavator)/
manual means over areas (exceeding 30 cm in depth, 1.5 m in width as
well as 10 sqm on plan) including getting out and disposal of excavated
earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
All kinds of soil
36.45
-
-
... More
CONCRETE WORK
1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural
sources : 4 graded stone aggregate 40 mm nominal size
derived from natural sources)
8.1
-
-
... More
MASONRY WORK
Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth in:
Cement mortar 1:4 (1 cement : 4 coarse sand)
15.15
-
-
... More
Providing and applying plaster of paris putty of 2 mm thickness over
plastered surface to prepare the surface even and smooth complete.
2210.8
-
-
... More
Applying one coat of water thinnable cement primer of approved brand
and manufacture on wall surface :
Water thinnable cement primer
1692.4
-
-
... More
Finishing walls with textured exterior paint of required shade :
New work (Two or more coats applied @ 3.28 ltr/10 sqm)
over and including priming coat of exterior primer applied
@ 2.20kg/10 sqm
518.4
-
-
... More
Wall painting with acrylic emulsion paint of approved brand and
manufacture to give an even shade :
Two or more coats on new work
1692.4
-
-
... More
Applying priming coat:
With ready mixed pink or Grey primer of approved brand
and manufacture on wood work (hard and soft wood)
75.6
-
-
... More
Finishing with Deluxe Multi surface paint system for interiors and
exteriors using Primer as per manufacturers specifications :
Two or more coats applied on walls @ 1.25 ltr/10 sqm
over and including one coat of Special primer applied @
0.75 ltr /10 sqm
75.6
-
-
... More
Providing and fixing factory made uPVC white colour casement/casement
cum fixed glazed windows comprising of uPVC multi-chambered frame,
sash and mullion (where ever required) extruded profiles duly reinforced
with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll
forming process of required length (shape & size according to uPVC
profile), uPVC extruded glazing beads of appropriate dimension, EPDM
gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white
powder coated) casement handles, G.I fasteners 100 x 8 mm size for
fixing frame to finished wall, plastic packers, plastic caps and necessary
stainless steel screws etc. Profile of frame & sash shall be mitred cut
and fusion welded at all corners, mullion (if required) shall be also fusion
welded including drilling of holes for fixing hardware's and drainage of
water etc. After fixing frame the gap between frame and adjacent finished
wall shall be filled with weather proof silicon sealant over backer rod of
required size and of approved quality, all complete as per approved
drawing & direction of Engineer-in-Charge. (Single / double glass panes
and silicon sealant shall be paid separately). Variation in profile dimension
in higher side shall be accepted but no extra payment on this account
shall be made.
Note: For uPVC frame, sash and mullion extruded profiles minus 5%
tolerancein dimension i.e. in depth & width of profile shall be acceptable.
Casement window double panels with S.S. friction hinges
(350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm
& sash / mullion 67 x 80 mm both having wall thickness of
2.3 ± 0.2 mm and single glazing bead/ double glazing bead
of appropriate dimension. (Area of window above 1.50 sqm).
52.99
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows
and other frames, wrought framed and fixed in position with hold fast
lugs or with dash fasteners of required dia & length (hold fast lugs or
dash fastener shall be paid for separately).
Second class teak wood
0.9
-
-
... More
Providing and fixing panelled or panelled and glazed shutters for doors,
windows and clerestory windows, fixing with butt hinges of required
size with necessary screws, excluding panelling which will be paid for
separately, all complete as per direction of Engineer-in-charge. (Note:-
Butt hinges and necessary screws shall be paid separately)
Second class teak wood
35 mm thick shutters
30.24
-
-
... More
12 mm cement plaster finished with a floating coat of neat cement of
mix :
1:4 (1 cement: 4 fine sand)
291.6
-
-
... More
FLOORING
VITRIFIED FLOOR TILES
Providing and laying Vitrified tiles in floor in different sizes (thickness to
be specified by the manufacturer) with water absorption less than 0.08%
and conforming to IS:15622, of approved brand & manufacturer, in all
colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:
4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including
grouting the joints with white cement and matching pigments etc. The
tiles must be cut with the zero chipping diamond cutter only . Laying of
tiles will be done with the notch trowel, plier, wedge, clips of required
thickness, leveling system and rubber mallet for placing the tiles gently
and easily.
Glazed vitrified floor tiles polished finish of size
Size of Tile 1200 x 1200 mm
210
-
-
... More
Glazed Vitrified tiles Matt/Antiskid finish of size
Size of Tile 600 x 1200 mm
70
-
-
... More
SANITARY & WATER SUPPLY WORKS
-
-
-
... More
Providing and fixing vitreous china dual purpose closet suitable for
use as squatting pan or European type water closet (Anglo Indian
W.C pan) with seat & lid fixed with C.P. brass hinges and rubber
buffers, 10 litre low level flushing cistern with fitting and brackets, 40
mm flush bend, 20 mm over flow pipe, with specials of standard
make and mosquito proof coupling of approved municipal design
complete, including painting of fittings and brackets, cutting and
making good the walls and floors wherever required:
White vitreous china dual purpose WC pan with white
solid plastic seat and lid with white vitreous china flushing
cistern and C.P. flush bend.
4
-
-
... More
Providing and fixing white vitreous china flat back half stall urinal of
size 580x380x350 mm with white PVC automatic flushing cistern,
with fittings, standard size C.P. brass flush pipe, spreaders with
unions and clamps (all in C.P. brass) with waste fitting as per IS :
2556, C.I. trap with outlet grating and other couplings in C.P. brass,
including painting of fittings and cutting and making good the walls
and floors wherever required :
Single half stall urinal with 5 litre P.V.C. automatic
flushing cistern
4
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP
Brass single hole basin mixer of approved quality and make, including
painting of fittings and brackets, cutting and making good the walls
wherever required:-
(a) White Vitreous China Wash basin size 550x400 mm with a
15 mm CP Brass single hole basin mixer
2
-
-
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved
quality & make and as per the direction of Engineer-in-charge.
2
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete.
Semi rigid pipe
40 mm dia
4
-
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior
glass (of approved quality) complete with 6 mm thick hard board
ground fixed to wooden cleats with C.P. brass screws and washers
complete.
4
-
-
... More
Providing and fixing toilet paper holder :
C.P. brass
4
-
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 gms.
15 mm nominal bore
4
-
-
... More
Providing and fixing C.P. brass stop cock (concealed) of standard
design and of approved make conforming to IS:8931.
15 mm nominal bore
12
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931
15mm nominal bore
4
-
-
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125
mm high and 112 mm distance from wall of standard shape with
bracket of the same materials with snap fittings of approved quality
and colour, weighing not less than 105 gms.
4
-
-
... More
Providing and fixing PTMT Waste Coupling for wash basin and sink,
of approved quality and colour.
Waste coupling 38 mm dia of 83 mm length and 77mm
breadth, weighing not less than 60 gms
4
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all CPVC
plain & brass threaded fittings This includes jointing of pipes & fittings
with one step CPVC solvent cement, trenching, refilling & testing of
joints complete as per direction of Engineer in Charge.
External work
25 mm nominal dia Pipes
50
-
-
... More
32 mm nominal dia Pipes
45
-
-
... More
40 mm nominal dia Pipes
90
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,
i/c cutting and making good the walls etc.
Internal work - Exposed on wall
15 mm dia nominal bore
45
-
-
... More
25 mm dia nominal bore
55
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water
storage tank, IS : 12701 marked, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank.
4000
-
-
... More
ELECTRICAL WORKS
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Group A
30
-
-
... More
Group B
32
-
-
... More
Group C
28
-
-
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop
earthing as required.
250
-
-
... More
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop
earthing as required.
72
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
120
-
-
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
272
-
-
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
60
-
-
... More
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
35
-
-
... More
Supplying and drawing following sizes of FRLS PVC insulatedcopper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.
2 x 1.5 sq. mm
100
-
-
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
2 Pair
126
-
-
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated , shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
65
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
20 mm
135
-
-
... More
25 mm
148
-
-
... More
32 mm
126
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 A switch
96
-
-
... More
3 pin 5/6 A socket outlet
10
-
-
... More
Telephone socket outlet
6
-
-
... More
TV antenna socket outlet
3
-
-
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
20
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
35
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
1 or 2 Module (75mmX75mm)
6
-
-
... More
3 Module (100mmX75mm)
12
-
-
... More
8 Module (125mmX125mm)
2
-
-
... More
12 Module (200mmX150mm)
10
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required
34
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A
modular switch, connections etc. as required.
5
-
-
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
26
-
-
... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.
11
-
-
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core cable and earthing etc. as required.
81
-
-
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
12
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
1 run of cable
180
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth
bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
12 way , Double door
2
-
-
... More
Supplying and fixing of following ways surface/ recessmounting, vertical type, 415 V, TPN MCB distribution board ofsheet steel, dust protected, duly powder painted, inclusive of
200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
12 way (4 + 36), Double door
1
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
55
-
-
... More
Double pole
2
-
-
... More
Supplying and fixing single pole blanking plate in the existing
MCB DB complete etc. as required.
7
-
-
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
63 A
1
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mmthick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
-
-
... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass
nut bolt & spring washer spaced at 50mm)
38
-
-
... More
Supplying of following type recessed / surface mounted LED light fixture complete with drivers, earthing point complete as required. (Havells or equivalent)
3) 18W LED
60
-
-
... More
4) 20 W LED bulb
8
-
-
... More
Supplying of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.
High Speed 225 mm sweep (Havells make)
8
-
-
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
13
-
-
... More
Beautification of Main Entrance Gateway with murals and architectural treatments including boulder wall and landscapping along entrance way
-
-
-
... More
CIVIL WORKS
-
-
-
... More
EARTH WORK
Earth work in excavation by mechanical means (Hydraulic excavator)/
manual means over areas (exceeding 30 cm in depth, 1.5 m in width as
well as 10 sqm on plan) including getting out and disposal of excavated
earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
All kinds of soil
146.04
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not exceeding 20cm in depth,
consolidating each deposited layer by ramming and watering, lead up
to 50 m and lift upto 1.5 m.
28.53
-
-
... More
Treatment of soil under existing floors using chemical emulsion
@ one litre per hole, 300 mm apart including drilling
12 mm diameter holes and plugging with cement mortar 1 :2
(1 cement : 2 Coarse sand) to match the existing floor:
With Chlorpyriphos/Lindane E.C. 20% with 1%
concentration
16.89
-
-
... More
CONCRETE WORK
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural
sources : 8 graded stone aggregate 40 mm nominal size
derived from natural sources)
26.9
-
-
... More
REINFORCED CEMENT CONCRETE
CAST IN SITU
Providing and laying in position specified grade of reinforced cement
concrete, excluding the cost of centering, shuttering, finishing and
reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural
sources : 3 graded stone aggregate 20 mm nominal size de
rived from natural sources)
33.02
-
-
... More
STEEL REINFORCEMENT
Steel reinforcement for R.C.C. work including straightening, cutting,
bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
2019.77
-
-
... More
FORM WORK
Centering and shuttering including strutting, propping etc. and removal
of form for
Foundations, footings, bases of columns, etc. for mass
concrete
6.74
-
-
... More
Walls (any thickness) including attached pilasters, butteresses,
plinth and string courses etc.
25.88
-
-
... More
MASONRY WORK
Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth in:
Cement mortar 1:4 (1 cement : 4 coarse sand)
9.93
-
-
... More
CEMENT PLASTER (IN FINE SAND)
12 mm cement plaster of mix :
1:4 (1 cement: 4 fine sand)
128.63
-
-
... More
Providing and applying plaster of paris putty of 2 mm thickness over
plastered surface to prepare the surface even and smooth complete.
68.22
-
-
... More
Applying one coat of water thinnable cement primer of approved brand
and manufacture on wall surface :
Water thinnable cement primer
183.3
-
-
... More
Finishing walls with textured exterior paint of required shade :
New work (Two or more coats applied @ 3.28 ltr/10 sqm)
over and including priming coat of exterior primer applied
@ 2.20kg/10 sqm
183.3
-
-
... More
Glazed Vitrified tiles Matt/Antiskid finish of size
Size of Tile 600 x 1200 mm
10.3
-
-
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : 7.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand)
157.5
-
-
... More
Mural work
61.32
-
-
... More
Landscaping work
1
-
-
... More
Renovation of front yard of temple including relaying of stone flooring
-
-
-
... More
CIVIL WORKS
-
-
-
... More
EARTH WORK
Earth work in excavation by mechanical means (Hydraulic excavator)/
manual means over areas (exceeding 30 cm in depth, 1.5 m in width as
well as 10 sqm on plan) including getting out and disposal of excavated
earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
All kinds of soil
19.8
-
-
... More
CONCRETE WORK
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural
sources : 8 graded stone aggregate 40 mm nominal size
derived from natural sources)
45
-
-
... More
REINFORCED CEMENT CONCRETE
CAST IN SITU
Reinforced cement concrete work in walls (any thickness), including
attached pilasters, buttresses, plinth and string courses, fillets, columns,
pillars, piers, abutments, posts and struts etc. above plinth level up to
floor five level, excluding cost of centering, shuttering, finishing and
reinforcement :
5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural
sources : 3 graded stone aggregate 20 mm nominal size
derived from natural sources)
9
-
-
... More
STEEL REINFORCEMENT
Steel reinforcement for R.C.C. work including straightening, cutting,
bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
759.35
-
-
... More
FORM WORK
Centering and shuttering including strutting, propping etc. and removal
of form for
Foundations, footings, bases of columns, etc. for mass
concrete
72
-
-
... More
MASONRY WORK
Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth in:
Cement mortar 1:4 (1 cement : 4 coarse sand)
67.5
-
-
... More
FLOORING
SAND STONE FLOORING
40 mm thick fine dressed stone flooring over 20 mm (average) thick
base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished
flush.
White sand stone
525
-
-
... More
Marble stone flooring with 18 mm thick marble stone, as per sample
of marble approved by Engineer-in-charge, over 20 mm (average) thick
base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed
with grey cement slurry, including rubbing and polishing complete
with :
Makrana white second quality
375
-
-
... More
Construction of Shoe Stand and Hand Wash area, Sitting Area in Temple entrance yard
-
-
-
... More
CIVIL WORKS
-
-
-
... More
EARTH WORK
Earth work in excavation by mechanical means (Hydraulic excavator)/
manual means over areas (exceeding 30 cm in depth, 1.5 m in width as
well as 10 sqm on plan) including getting out and disposal of excavated
earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
All kinds of soil
141.71
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not exceeding 20cm in depth,
consolidating each deposited layer by ramming and watering, lead up
to 50 m and lift upto 1.5 m.
141.71
-
-
... More
Treatment of soil under existing floors using chemical emulsion
@ one litre per hole, 300 mm apart including drilling
12 mm diameter holes and plugging with cement mortar 1 :2
(1 cement : 2 Coarse sand) to match the existing floor:
With Chlorpyriphos/Lindane E.C. 20% with 1%
concentration
70
-
-
... More
CONCRETE WORK
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural
sources : 8 graded stone aggregate 40 mm nominal size
derived from natural sources)
6.41
-
-
... More
REINFORCED CEMENT CONCRETE
CAST IN SITU
Providing and laying in position specified grade of reinforced cement
concrete, excluding the cost of centering, shuttering, finishing and
reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural
sources : 3 graded stone aggregate 20 mm nominal size de
rived from natural sources)
23.19
-
-
... More
STEEL REINFORCEMENT
Steel reinforcement for R.C.C. work including straightening, cutting,
bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
2157.05
-
-
... More
FORM WORK
Centering and shuttering including strutting, propping etc. and removal
of form for
Foundations, footings, bases of columns, etc. for mass
concrete
19.2
-
-
... More
Walls (any thickness) including attached pilasters, butteresses,
plinth and string courses etc.
53.46
-
-
... More
Suspended floors, roofs, landings, balconies and access
platform
6.48
-
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
32.64
-
-
... More
MASONRY WORK
Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth in:
Cement mortar 1:4 (1 cement : 4 coarse sand)
14.09
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix:
1:4 (1 cement: 4 fine sand)
38.43
-
-
... More
20 mm cement plaster of mix :
1:4 (1 cement: 4 fine sand)
38.43
-
-
... More
Applying priming coat:
With ready mixed red oxide zinc chromate primer of
approved brand and manufacture on steel galvanised iron/
steel works
221.04
-
-
... More
Finishing with Deluxe Multi surface paint system for interiors and
exteriors using Primer as per manufacturers specifications :
Painting Steel work with Deluxe Multi Surface Paint to
give an even shade. Two or more coat applied @ 0.90 ltr/
10 sqm over an under coat of primer applied @ 0.80 ltr/
10 sqm of approved brand and manufacture
221.04
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to
IS: 15622 (thickness to be specified by the manufacturer), of approved
make, in all colours, shades except burgundy, bottle green, black of
any size as approved by Engineer-in-Charge, in skirting, risers of steps
and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3
coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,
including pointing in white cement mixed with pigment of matching shade
complete.
35.64
-
-
... More
Providing and laying Polished Granite stone flooring in required design
and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 mm thick stone slab
over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4
coarse sand) laid and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching shade including
rubbing, curing and polishing etc. all complete as specified and as
directed by the Engineer-in-Charge.
Polished Granite stone slab colour of Black, Cherry/Ruby
Red or equivalent
38.34
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes
etc.) trusses etc., including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete.
Hot finished welded type tubes
5763.14
-
-
... More
Providing & fixing at all heights, levels and locations colour finish
Aluminium alloy roofing sheets of alloy IS designation 31500, temper
Hx8 conforming to IS 737 and dimensions as per IS code 2676 with
characteristics of good formability and corrosion resistance. The
profile sheets shall be fixed to truss members in slope or required
pitch or curvature with Hex cap headed self drilling/tapping Stainless
steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all
inclusive of labour, scaffolding, T&P and sundries etc. complete as
per directions of the Engineer-In-Charge. (Cost of truss/frame work
shall be paid separately).
0.71 mm, Aluminium Color coated troughed profile with
center to center pitch of 200 mm, depth of 32 mm, overall
profile width1092 mm, cover width 1000mm.
46.17
-
-
... More
SANITARY & WATER SUPPLY WORKS
-
-
-
... More
Providing and fixing C.P. brass stop cock (concealed) of standard
design and of approved make conforming to IS:8931.
15 mm nominal bore
2
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931
15mm nominal bore
6
-
-
... More
Providing and fixing PTMT Waste Coupling for wash basin and sink,
of approved quality and colour.
Waste coupling 38 mm dia of 83 mm length and 77mm
breadth, weighing not less than 60 gms
2
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all CPVC
plain & brass threaded fittings This includes jointing of pipes & fittings
with one step CPVC solvent cement, trenching, refilling & testing of
joints complete as per direction of Engineer in Charge.
External work
40 mm nominal dia Pipes
95
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,
i/c cutting and making good the walls etc.
Internal work - Exposed on wall
15 mm dia nominal bore
3
-
-
... More
25 mm dia nominal bore
10
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water
storage tank, IS : 12701 marked, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank.
2000
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm PTMT
pillar cock, 32 mm PTMT waste coupling of standard pattern, including
painting of fittings and brackets, cutting and making good the walls
wherever required. White Vitreous China Flat back wash basin size
550x400 mm with single 15 mm PTMT pillar cock.
6
-
-
... More
50 LPH R.O. system
2
-
-
... More
Iron Removal Filter
1
-
-
... More
Public Convenience Demolition and construction of new block
-
-
-
... More
CIVIL WORKS
-
-
-
... More
EARTH WORK
Earth work in excavation by mechanical means (Hydraulic excavator)/
manual means over areas (exceeding 30 cm in depth, 1.5 m in width as
well as 10 sqm on plan) including getting out and disposal of excavated
earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
All kinds of soil
206.62
-
-
... More
Supplying and filling in plinth with sand under floors, including watering,
ramming, consolidating and dressing complete.
41.4
-
-
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL
anti-termite treatment (excluding the cost of chemical emulsion) :
Along external wall where the apron is not provided using
chemical emulsion @ 7.5 litres / sqm of the vertical surface of
the substructure to a depth of 300mm including excavation
channel along the wall & rodding etc. complete:
With Chlorpyriphos/ Lindane E.C. 20% with 1%
concentration
74
-
-
... More
Along the external wall below concrete or masonry apron using
chemical emulsion @ 2.25 litres per linear metre including
drilling and plugging holes etc.:
With Chlorpyriphos/ Lindane E.C. 20% with 1%
concentration
33.08
-
-
... More
Treatment of soil under existing floors using chemical emulsion
@ one litre per hole, 300 mm apart including drilling
12 mm diameter holes and plugging with cement mortar 1 :2
(1 cement : 2 Coarse sand) to match the existing floor:
With Chlorpyriphos/Lindane E.C. 20% with 1%
concentration
125.8
-
-
... More
CONCRETE WORK
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural
sources : 8 graded stone aggregate 40 mm nominal size
derived from natural sources)
13.4
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement
: 3 coarse sand (zone-III) derived from natural sources : 6 graded stone
aggregate 20 mm nominal size derived from natural sources) over 75mm
thick bed of dry brick ballast 40 mm nominal size, well rammed and
consolidated and grouted with fine sand, including necessary excavation,
levelling & dressing & finishing the top smooth.
39.7
-
-
... More
REINFORCED CEMENT CONCRETE
CAST IN SITU
Providing and laying in position specified grade of reinforced cement
concrete, excluding the cost of centering, shuttering, finishing and
reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural
sources : 3 graded stone aggregate 20 mm nominal size de
rived from natural sources)
26.45
-
-
... More
Reinforced cement concrete work in walls (any thickness), including
attached pilasters, buttresses, plinth and string courses, fillets, columns,
pillars, piers, abutments, posts and struts etc. above plinth level up to
floor five level, excluding cost of centering, shuttering, finishing and
reinforcement :
5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural
sources : 3 graded stone aggregate 20 mm nominal size
derived from natural sources)
4.54
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs
having slope up to 15° landings, balconies, shelves, chajjas, lintels,
bands, plain window sills, staircases and spiral stair cases above plinth
level up to floor five level, excluding the cost of centering, shuttering,
finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse
sand(zone-III) derived from natural sources : 3 graded stone aggregate
20 mm nominal size derived from natural sources).
4.19
-
-
... More
STEEL REINFORCEMENT
Steel reinforcement for R.C.C. work including straightening, cutting,
bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
3729.02
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting,
bending, placing in position and binding all complete above plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
4680.01
-
-
... More
FORM WORK
Centering and shuttering including strutting, propping etc. and removal
of form for
Foundations, footings, bases of columns, etc. for mass
concrete
14.7
-
-
... More
Walls (any thickness) including attached pilasters, butteresses,
plinth and string courses etc.
23.75
-
-
... More
Suspended floors, roofs, landings, balconies and access
platform
20.15
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and
cantilevers
37.74
-
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
7.8
-
-
... More
Extra for additional height in centering, shuttering where ever required
with adequate bracing, propping etc., including cost of de-shuttering
and decentering at all levels, over a height of 3.5 m, for every additional
height of 1 metre or part thereof (Plan area to be measured).
Suspended floors, roofs, landing, beams and balconies
(Plan area to be measured)
6.65
-
-
... More
MASONRY WORK
Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth in:
Cement mortar 1:4 (1 cement : 4 coarse sand)
34.78
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level up to floor V level in
all shapes and sizes in :
Cement mortar 1:4 (1 cement : 4 coarse sand)
13.63
-
-
... More
CEMENT PLASTER (IN FINE SAND)
12 mm cement plaster of mix :
1:4 (1 cement: 4 fine sand)
7.88
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix:
1:4 (1 cement: 4 fine sand)
141.18
-
-
... More
20 mm cement plaster of mix :
1:4 (1 cement: 4 fine sand)
141.18
-
-
... More
Providing and applying plaster of paris putty of 2 mm thickness over
plastered surface to prepare the surface even and smooth complete.
290.24
-
-
... More
Applying one coat of water thinnable cement primer of approved brand
and manufacture on wall surface :
Water thinnable cement primer
290.24
-
-
... More
Finishing walls with textured exterior paint of required shade :
New work (Two or more coats applied @ 3.28 ltr/10 sqm)
over and including priming coat of exterior primer applied
@ 2.20kg/10 sqm
149.06
-
-
... More
Wall painting with acrylic emulsion paint of approved brand and
manufacture to give an even shade :
Two or more coats on new work
149.06
-
-
... More
Applying priming coat:
With ready mixed pink or Grey primer of approved brand
and manufacture on wood work (hard and soft wood)
28.58
-
-
... More
Finishing with Deluxe Multi surface paint system for interiors and
exteriors using Primer as per manufacturers specifications :
Two or more coats applied on walls @ 1.25 ltr/10 sqm
over and including one coat of Special primer applied @
0.75 ltr /10 sqm
28.58
-
-
... More
Applying priming coat:
With ready mixed red oxide zinc chromate primer of
approved brand and manufacture on steel galvanised iron/
steel works
139.23
-
-
... More
Finishing with Deluxe Multi surface paint system for interiors and
exteriors using Primer as per manufacturers specifications :
Painting Steel work with Deluxe Multi Surface Paint to
give an even shade. Two or more coat applied @ 0.90 ltr/
10 sqm over an under coat of primer applied @ 0.80 ltr/
10 sqm of approved brand and manufacture
139.23
-
-
... More
FLOORING
VITRIFIED FLOOR TILES
Providing and laying Vitrified tiles in floor in different sizes (thickness to
be specified by the manufacturer) with water absorption less than 0.08%
and conforming to IS:15622, of approved brand & manufacturer, in all
colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:
4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including
grouting the joints with white cement and matching pigments etc. The
tiles must be cut with the zero chipping diamond cutter only . Laying of
tiles will be done with the notch trowel, plier, wedge, clips of required
thickness, leveling system and rubber mallet for placing the tiles gently
and easily.
Glazed vitrified floor tiles polished finish of size
Size of Tile 1200 x 1200 mm
8.94
-
-
... More
Glazed Vitrified tiles Matt/Antiskid finish of size
Size of Tile 600 x 1200 mm
5.25
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to
IS: 15622 (thickness to be specified by the manufacturer), of approved
make, in all colours, shades except burgundy, bottle green, black of
any size as approved by Engineer-in-Charge, in skirting, risers of steps
and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3
coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,
including pointing in white cement mixed with pigment of matching shade
complete.
95.04
-
-
... More
Providing and laying Polished Granite stone flooring in required design
and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 mm thick stone slab
over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4
coarse sand) laid and jointed with cement slurry and pointing with white
cement slurry admixed with pigment of matching shade including
rubbing, curing and polishing etc. all complete as specified and as
directed by the Engineer-in-Charge.
Polished Granite stone slab colour of Black, Cherry/Ruby
Red or equivalent
11.28
-
-
... More
Providing and fixing false ceiling at all height including providing and
fixing of frame work made of special sections, power pressed from
M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both
side inclusive) as per IS : 277 and consisting of angle cleats of size
25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at
1200 mm centre to centre, one flange fixed to the ceiling with dash
fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange
of cleat fixed to the angle hangers of 25x10x0.50 mm of required
length with nuts & bolts of required size and other end of angle
hanger fixed with intermediate G.I. channels 45x15x0.9 mm running
at the spacing of 1200 mm centre to centre, to which the ceiling
section 0.5 mm thick bottom wedge of 80 mm with tapered flanges
of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,
shall be fixed in a direction perpendicular to G.I. intermediate channel
with connecting clips made out of 2.64 mm dia x 230 mm long G.I.
wire at every junction, including fixing perimeter channels 0.5 mm
thick 27 mm high having flanges of 20 mm and 30 mm long, the
perimeter of ceiling fixed to wall/partition with the help of rawl plugs
at 450 mm centre, with 25mm long dry wall screws @ 230 mm
interval, including fixing of gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5 x 25
mm at 230 mm c/c, including jointing and finishing to a flush finish
of tapered and square edges of the board with recommended jointing
compound , jointing tapes , finishing with jointing compound in 3
layers covering upto 150 mm on both sides of joint and two coats of
primer suitable for board, all as per manufacturer's specification and
also including the cost of making openings for light fittings, grills,
diffusers, cutouts made with frame of perimeter channels suitably
fixed, all complete as per drawings, specification and direction of
the Engineer in Charge but excluding the cost of painting with :
12.5 mm thick tapered edge gypsum moisture resistant
board
46
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows
and other frames, wrought framed and fixed in position with hold fast
lugs or with dash fasteners of required dia & length (hold fast lugs or
dash fastener shall be paid for separately).
Second class teak wood
0.34
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS :
2202 (Part I) non-decorative type, core of block board construction with
frame of 1st class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face veneers on both
faces of shutters:
35 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws
11.43
-
-
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm
minimum depth on all edges of flush door shutters (over all area of door
shutter to be measured).
11.43
-
-
... More
Providing & Fixing decorative high pressure laminated sheet of plain /
wood grain in gloss / matt/ suede finish with high density protective
surface layer and reverse side of adhesive bonding quality conforming
to IS : 2046 Type S, including cost of adhesive of approved quality.
1.5 mm thick
11.43
-
-
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised
(anodic coating not less than grade AC 10 as per IS : 1868),
transparent or dyed to required colour or shade, with nuts and screws
etc. complete :
300x16 mm
3
-
-
... More
250x16 mm
3
-
-
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to
frame with 10 mm diameter bolts, nuts and wooden plugs and embedding
in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse
sand : 6 graded stone aggregate 20mm nominal size).
36
-
-
... More
Providing and fixing aluminium die cast body tubular type universal
hydraulic door closer (having brand logo with ISI, IS : 3564, embossed
on the body, door weight upto 35 kg and door width upto 700 mm), with
necessary accessories and screws etc. complete.
3
-
-
... More
Providing and fixing factory made uPVC white colour casement/casement
cum fixed glazed windows comprising of uPVC multi-chambered frame,
sash and mullion (where ever required) extruded profiles duly reinforced
with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll
forming process of required length (shape & size according to uPVC
profile), uPVC extruded glazing beads of appropriate dimension, EPDM
gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white
powder coated) casement handles, G.I fasteners 100 x 8 mm size for
fixing frame to finished wall, plastic packers, plastic caps and necessary
stainless steel screws etc. Profile of frame & sash shall be mitred cut
and fusion welded at all corners, mullion (if required) shall be also fusion
welded including drilling of holes for fixing hardware's and drainage of
water etc. After fixing frame the gap between frame and adjacent finished
wall shall be filled with weather proof silicon sealant over backer rod of
required size and of approved quality, all complete as per approved
drawing & direction of Engineer-in-Charge. (Single / double glass panes
and silicon sealant shall be paid separately). Variation in profile dimension
in higher side shall be accepted but no extra payment on this account
shall be made.
Note: For uPVC frame, sash and mullion extruded profiles minus 5%
tolerancein dimension i.e. in depth & width of profile shall be acceptable.
Casement window double panels with S.S. friction hinges
(350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm
& sash / mullion 67 x 80 mm both having wall thickness of
2.3 ± 0.2 mm and single glazing bead/ double glazing bead
of appropriate dimension. (Area of window above 1.50 sqm).
3.38
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat
with approved steel primer all complete.
Fixed to openings /wooden frames with rawl plugs screws etc.
48.87
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow
tubes, channels, plates etc., including welding, grinding, buffing, polishing
and making curvature (wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete, i/c fixing the railing
with necessary accessories & stainless steel dash fasteners , stainless
steel bolts etc., of required size, on the top of the floor or the side of
waist slab with suitable arrangement as per approval of Engineer-incharge,
(for payment purpose only weight of stainless steel members
shall be considered excluding fixing accessories such as nuts, bolts,
fasteners etc.).
200.7
-
-
... More
12 mm cement plaster finished with a floating coat of neat cement of
mix :
1:4 (1 cement: 4 fine sand)
72.14
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes
etc.) trusses etc., including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete.
Hot finished welded type tubes
2262.53
-
-
... More
Providing & fixing at all heights, levels and locations colour finish
Aluminium alloy roofing sheets of alloy IS designation 31500, temper
Hx8 conforming to IS 737 and dimensions as per IS code 2676 with
characteristics of good formability and corrosion resistance. The
profile sheets shall be fixed to truss members in slope or required
pitch or curvature with Hex cap headed self drilling/tapping Stainless
steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all
inclusive of labour, scaffolding, T&P and sundries etc. complete as
per directions of the Engineer-In-Charge. (Cost of truss/frame work
shall be paid separately).
0.71 mm, Aluminium Color coated troughed profile with
center to center pitch of 200 mm, depth of 32 mm, overall
profile width1092 mm, cover width 1000mm.
66.24
-
-
... More
Providing ridges or hips of width 60 cm overall width plain G.S. sheet
fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I.
limpet and bitumen washers complete.
@ one litre per hole, 300 mm apart including drilling
12 mm diameter holes and plugging with cement mortar 1 :2
(1 cement : 2 Coarse sand) to match the existing floor:
With Chlorpyriphos/Lindane E.C. 20% with 1%
concentration
0.80 mm thick with zinc coating not less than 275 gm/m²
23.64
-
-
... More
Demolishing cement concrete manually/ by mechanical means
including disposal of material within 50 metres lead as per direction
of Engineer - in - charge.
Nominal concrete 1:3:6 or richer mix (i/c equivalent
design mix)
1
-
-
... More
Demolishing brick work manually/ by mechanical means including
stacking of serviceable material and disposal of unserviceable material
within 50 metres lead as per direction of Engineer-in-charge.
In cement mortar
10.86
-
-
... More
Dismantling tile work in floors and roofs laid in cement mortar including
stacking material within 50 metres lead.
For thickness of tiles 10 mm to 25 mm
10
-
-
... More
Demolishing R.C.C. work manually/ by mechanical means including
stacking of steel bars and disposal of unserviceable material within
50 metres lead as per direction of Engineer - in- charge.
7.88
-
-
... More
Dismantling doors, windows and clerestory windows (steel or wood)
shutter including chowkhats, architrave, holdfasts etc. complete and
stacking within 50 metres lead :
Of area 3 sq. metres and below
5.94
-
-
... More
Dismantling wood work in frames, trusses, purlins and rafters up to
10 metres span and 5 metres height including stacking the material
within 50 metres lead :
Of sectional area 40 square centimetres and above
0.2
-
-
... More
Dismantling roofing including ridges, hips, valleys and gutters etc.,
and stacking the material within 50 metres lead of:
G.S. Sheet
18
-
-
... More
SANITARY & WATER SUPPLY WORKS
-
-
-
... More
Providing and fixing vitreous china dual purpose closet suitable for
use as squatting pan or European type water closet (Anglo Indian
W.C pan) with seat & lid fixed with C.P. brass hinges and rubber
buffers, 10 litre low level flushing cistern with fitting and brackets, 40
mm flush bend, 20 mm over flow pipe, with specials of standard
make and mosquito proof coupling of approved municipal design
complete, including painting of fittings and brackets, cutting and
making good the walls and floors wherever required:
White vitreous china dual purpose WC pan with white
solid plastic seat and lid with white vitreous china flushing
cistern and C.P. flush bend.
4
-
-
... More
Providing and fixing white vitreous china flat back half stall urinal of
size 580x380x350 mm with white PVC automatic flushing cistern,
with fittings, standard size C.P. brass flush pipe, spreaders with
unions and clamps (all in C.P. brass) with waste fitting as per IS :
2556, C.I. trap with outlet grating and other couplings in C.P. brass,
including painting of fittings and cutting and making good the walls
and floors wherever required :
Single half stall urinal with 5 litre P.V.C. automatic
flushing cistern
3
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP
Brass single hole basin mixer of approved quality and make, including
painting of fittings and brackets, cutting and making good the walls
wherever required:-
(a) White Vitreous China Wash basin size 550x400 mm with a
15 mm CP Brass single hole basin mixer
5
-
-
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved
quality & make and as per the direction of Engineer-in-charge.
5
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete.
Semi rigid pipe
40 mm dia
3
-
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior
glass (of approved quality) complete with 6 mm thick hard board
ground fixed to wooden cleats with C.P. brass screws and washers
complete.
5
-
-
... More
Providing and fixing toilet paper holder :
C.P. brass
4
-
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 gms.
15 mm nominal bore
5
-
-
... More
Providing and fixing C.P. brass stop cock (concealed) of standard
design and of approved make conforming to IS:8931.
15 mm nominal bore
8
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931
15mm nominal bore
5
-
-
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125
mm high and 112 mm distance from wall of standard shape with
bracket of the same materials with snap fittings of approved quality
and colour, weighing not less than 105 gms.
5
-
-
... More
Providing and fixing PTMT Waste Coupling for wash basin and sink,
of approved quality and colour.
Waste coupling 38 mm dia of 83 mm length and 77mm
breadth, weighing not less than 60 gms
5
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all CPVC
plain & brass threaded fittings This includes jointing of pipes & fittings
with one step CPVC solvent cement, trenching, refilling & testing of
joints complete as per direction of Engineer in Charge.
External work
25 mm nominal dia Pipes
45
-
-
... More
32 mm nominal dia Pipes
35
-
-
... More
40 mm nominal dia Pipes
20
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,
i/c cutting and making good the walls etc.
15 mm dia nominal bore
95
-
-
... More
25 mm dia nominal bore
75
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water
storage tank, IS : 12701 marked, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank.
4000
-
-
... More
ELECTRICAL WORKS
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Group A
6
-
-
... More
Group B
12
-
-
... More
Group C
6
-
-
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop
earthing as required.
60
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
65
-
-
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
and other frames, wrought framed and fixed in position with hold fast
lugs or with dash fasteners of required dia & length (hold fast lugs or
dash fastener shall be paid for separately).
Second class teak wood
58
-
-
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
20
-
-
... More
Supplying and drawing following sizes of FRLS PVC insulatedcopper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.
2 x 1.5 sq. mm
56
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed
conduit as required.
20 mm
30
-
-
... More
25 mm
40
-
-
... More
32 mm
25
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 A switch
28
-
-
... More
3 pin 5/6 A socket outlet
4
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
13
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
1 or 2 Module (75mmX75mm)
2
-
-
... More
3 Module (100mmX75mm)
2
-
-
... More
6 Module (200mmX75mm)
3
-
-
... More
8 Module (125mmX125mm)
2
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required
5
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A
modular switch, connections etc. as required.
2
-
-
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
13
-
-
... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.
7
-
-
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core cable and earthing etc. as required.
19
-
-
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
Upto 450 mm sweep
5
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth
bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
8 way , Double door
1
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
8
-
-
... More
Double pole
1
-
-
... More
Supplying and fixing single pole blanking plate in the existing
MCB DB complete etc. as required.
3
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mmthick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
1
-
-
... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass
nut bolt & spring washer spaced at 50mm)
19
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Upto 35 sq. mm
51
-
-
... More
Supply of following size Power/Control Copper cables, Solid Copper conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armoured (Galvanised for cables up to 10 x 1.5 sq mm.8 x 2.5 sq mm.2 x 10 sq mm.3 x 10 sq mm.4 x 6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1) (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 3 Core A2XFY
16.00 Sq. mm. Core U.G. armoured cable
51
-
-
... More
Supplying of following type recessed / surface mounted LED light fixture complete with drivers, earthing point complete as required. (Havells or equivalent)
1) 12W LED
3
-
-
... More
3) 18W LED
4
-
-
... More
4) 20 W LED bulb
7
-
-
... More
Supplying of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.
High Speed 225 mm sweep (Havells make)
5
-
-
... More
Signages and Campus Illumination at Geeta Mandir
-
-
-
... More
Signage Work
-
-
-
... More
Providing and installation of Retro-Reflectrorised Mandatory /Regulatory/ Informatory sign as per IRC: 67-2012 made of Omni Cube reflective sheeting Type XI (Make Avery Dennison or Equivalent) with Traffic Jet or equivalent Reflective Printing vide clause 801.3 of MORTH, fixed over Aluminium composite material 3.20 mm thick fixed on SS (304Grade)square frame of size 25x25x3 mm supported on SS(304 Grade)complete as per drawing and as per technical specification clause 801. 15 Years' Warranty will be Provided on the Reflective Material in Type XI by the Manufacturer of Reflective Sheeting. The Ink used for printing on the all Logos/ Images in Sign Boards should be of the same make as of that of the Retro Reflective Sheeting Manufacturer. Reflective Sheeting Test Result and IRC Accreditation of Trafficjet Digital Printer or equivalent shouid be submitted having attested by OEM.
2400 mm x 1200 mm (To be installed by 2 Posts of length 3900 mm above ground level firmly fixed to the ground by means of properly designed depth of foundation with M15 grade cement concrete 60cmX60cmX90cm and painting etc. completed as per direction . )
2
-
-
... More
1800 mm x 1200 mm (To be installed by 2 Posts of length 3900 mm above ground level firmly fixed to the ground by means of properly designed depth of foundation with M15 grade cement concrete 60cmX60cm X90 cm complete. )
1
-
-
... More
1200 mmx 900 mm (To be installed by 1 Post of length 3600 mm above ground level firmly fixed to the ground by means of properly designed depth of foundation with M15 grade cement concrete 45cmX45cmX75cm and painting etc. completed as per direction . )
7
-
-
... More
800 mm x 600 mm (To be installed by 1 Post of length 3300 mm above ground level firmly fixed to the ground by means of properly designed depth of foundation with M15 grade cement concrete 45cmX45cmX75cm and painting etc. completed as per direction . )
8
-
-
... More
600 mm x 450 mm (To be installed by 1 Post of length 3300 mm above ground level firmly fixed to the ground by means of properly designed depth of foundation with M15 grade cement concrete 45cmX45cmX75cm and painting etc. completed as per direction . )
2
-
-
... More
Campus Illumination
-
-
-
... More
Supplying, installation, testing and Commission of the following outdoor light of LED luminaries complete with all accessories such as driver as required complete with 7-8 meter pole and foundation with 2.5 sq.mm. P.V.C. insulated copper conductor as required and as directed by the department
20
-
-
... More
Supplying including installation, connection cable, as approved by the Deptt.)with 2x2.5 sqmm copper FR CABLE, testing and commissioning of following BOLLARD LIGHT on Cement concrete foundation including lamp, driver, ballast as required complete as directed and specified by the deptt.
58
-
-
... More
Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 3 Core A2XWY A2XFY 6.00 Sq.mm 3 Core armoured U.G. cable
552
-
-
... More
Supplying and installation and commissioning of vermin and dust proof totally enclosed double door cubical type compartmental floor mounting panel board of size 1.20 m ×1.00 m ×0.50 m made of 16 SWG1.66mm) thick CR sheet and 35 mm × 35 mm × 6 mm size angle and 35 mm ×6 mm flat iron having 4 nos legs at the bottom and G.I. Sheet reefing on the top complete painting with 2 coats of red oxide metal primer and 2 coats of enameled paint complete with all accessories and protection switch gear. The panel board is to be erected in 1:3:6 RCC pole foundation including excavation of trench and brick soling etc. complete neatly internal wiring done as specified and directed by the department comprising of the following electrical items.
1
-
-
... More
Yoga & Meditation deck at Geeta Mandir
-
-
-
... More
CIVIL WORKS
-
-
-
... More
EARTH WORK
Earth work in excavation by mechanical means (Hydraulic excavator)/
manual means over areas (exceeding 30 cm in depth, 1.5 m in width as
well as 10 sqm on plan) including getting out and disposal of excavated
earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
All kinds of soil
76.64
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not exceeding 20cm in depth,
consolidating each deposited layer by ramming and watering, lead up
to 50 m and lift upto 1.5 m.
46.49
-
-
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL
anti-termite treatment (excluding the cost of chemical emulsion) :
Along external wall where the apron is not provided using
chemical emulsion @ 7.5 litres / sqm of the vertical surface of
the substructure to a depth of 300mm including excavation
channel along the wall & rodding etc. complete:
With Chlorpyriphos/ Lindane E.C. 20% with 1%
concentration
9
-
-
... More
Along the external wall below concrete or masonry apron using
chemical emulsion @ 2.25 litres per linear metre including
drilling and plugging holes etc.:
With Chlorpyriphos/ Lindane E.C. 20% with 1%
concentration
9
-
-
... More
Treatment of soil under existing floors using chemical emulsion
@ one litre per hole, 300 mm apart including drilling
12 mm diameter holes and plugging with cement mortar 1 :2
(1 cement : 2 Coarse sand) to match the existing floor:
With Chlorpyriphos/Lindane E.C. 20% with 1%
concentration
7.26
-
-
... More
CONCRETE WORK
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural
sources : 8 graded stone aggregate 40 mm nominal size
derived from natural sources)
13.5
-
-
... More
REINFORCED CEMENT CONCRETE
CAST IN SITU
Providing and laying in position specified grade of reinforced cement
concrete, excluding the cost of centering, shuttering, finishing and
reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural
sources : 3 graded stone aggregate 20 mm nominal size de
rived from natural sources)
19.73
-
-
... More
STEEL REINFORCEMENT
Steel reinforcement for R.C.C. work including straightening, cutting,
bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
903.14
-
-
... More
FORM WORK
Centering and shuttering including strutting, propping etc. and removal
of form for
Foundations, footings, bases of columns, etc. for mass
concrete
4.32
-
-
... More
Walls (any thickness) including attached pilasters, butteresses,
plinth and string courses etc.
9.96
-
-
... More
Suspended floors, roofs, landings, balconies and access
platform
18
-
-
... More
MASONRY WORK
Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth in:
Cement mortar 1:4 (1 cement : 4 coarse sand)
23.61
-
-
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)
9.72
-
-
... More
Wooden super-structure
1
-
-
... More
Finishing works including Plasteing, Roofing works, painting, Flooring, Door Windows, Internal Electrical Works etc. for UTSAV GHAR
-
-
-
... More
CIVIL WORKS
-
-
-
... More
EARTH WORK
Earth work in excavation by mechanical means (Hydraulic excavator)/
manual means over areas (exceeding 30 cm in depth, 1.5 m in width as
well as 10 sqm on plan) including getting out and disposal of excavated
earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
All kinds of soil
42.61
-
-
... More
CONCRETE WORK
1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural
sources : 4 graded stone aggregate 40 mm nominal size
derived from natural sources)
10.78
-
-
... More
MASONRY WORK
Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth in:
Cement mortar 1:4 (1 cement : 4 coarse sand)
26.37
-
-
... More
CEMENT PLASTER (IN FINE SAND)
12 mm cement plaster of mix :
1:4 (1 cement: 4 fine sand)
179.52
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix:
1:4 (1 cement: 4 fine sand)
234.96
-
-
... More
20 mm cement plaster of mix :
1:4 (1 cement: 4 fine sand)
8.42
-
-
... More
Providing and applying plaster of paris putty of 2 mm thickness over
plastered surface to prepare the surface even and smooth complete.
649.44
-
-
... More
Applying one coat of water thinnable cement primer of approved brand
and manufacture on wall surface :
Water thinnable cement primer
649.44
-
-
... More
Finishing walls with textured exterior paint of required shade :
New work (Two or more coats applied @ 3.28 ltr/10 sqm)
over and including priming coat of exterior primer applied
@ 2.20kg/10 sqm
234.96
-
-
... More
Wall painting with acrylic emulsion paint of approved brand and
manufacture to give an even shade :
Two or more coats on new work
414.48
-
-
... More
Applying priming coat:
With ready mixed pink or Grey primer of approved brand
and manufacture on wood work (hard and soft wood)
50.4
-
-
... More
Finishing with Deluxe Multi surface paint system for interiors and
exteriors using Primer as per manufacturers specifications :
Two or more coats applied on walls @ 1.25 ltr/10 sqm
over and including one coat of Special primer applied @
0.75 ltr /10 sqm
50.4
-
-
... More
FLOORING
VITRIFIED FLOOR TILES
Providing and laying Vitrified tiles in floor in different sizes (thickness to
be specified by the manufacturer) with water absorption less than 0.08%
and conforming to IS:15622, of approved brand & manufacturer, in all
colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:
4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including
grouting the joints with white cement and matching pigments etc. The
tiles must be cut with the zero chipping diamond cutter only . Laying of
tiles will be done with the notch trowel, plier, wedge, clips of required
thickness, leveling system and rubber mallet for placing the tiles gently
and easily.
Glazed vitrified floor tiles polished finish of size
Size of Tile 1200 x 1200 mm
179.52
-
-
... More
Glazed Vitrified tiles Matt/Antiskid finish of size
Size of Tile 600 x 1200 mm
12.93
-
-
... More
12 mm cement plaster finished with a floating coat of neat cement of
mix :
1:4 (1 cement: 4 fine sand)
224.25
-
-
... More
Providing and fixing factory made uPVC white colour casement/casement
cum fixed glazed windows comprising of uPVC multi-chambered frame,
sash and mullion (where ever required) extruded profiles duly reinforced
with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll
forming process of required length (shape & size according to uPVC
profile), uPVC extruded glazing beads of appropriate dimension, EPDM
gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white
powder coated) casement handles, G.I fasteners 100 x 8 mm size for
fixing frame to finished wall, plastic packers, plastic caps and necessary
stainless steel screws etc. Profile of frame & sash shall be mitred cut
and fusion welded at all corners, mullion (if required) shall be also fusion
welded including drilling of holes for fixing hardware's and drainage of
water etc. After fixing frame the gap between frame and adjacent finished
wall shall be filled with weather proof silicon sealant over backer rod of
required size and of approved quality, all complete as per approved
drawing & direction of Engineer-in-Charge. (Single / double glass panes
and silicon sealant shall be paid separately). Variation in profile dimension
in higher side shall be accepted but no extra payment on this account
shall be made.
Note: For uPVC frame, sash and mullion extruded profiles minus 5%
tolerancein dimension i.e. in depth & width of profile shall be acceptable.
Casement window double panels with S.S. friction hinges
(350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm
& sash / mullion 67 x 80 mm both having wall thickness of
2.3 ± 0.2 mm and single glazing bead/ double glazing bead
of appropriate dimension. (Area of window above 1.50 sqm).
21.21
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows
and other frames, wrought framed and fixed in position with hold fast
lugs or with dash fasteners of required dia & length (hold fast lugs or
dash fastener shall be paid for separately).
Second class teak wood
0.44
-
-
... More
Providing and fixing panelled or panelled and glazed shutters for doors,
windows and clerestory windows, fixing with butt hinges of required
size with necessary screws, excluding panelling which will be paid for
separately, all complete as per direction of Engineer-in-charge. (Note:-
Butt hinges and necessary screws shall be paid separately)
Second class teak wood
35 mm thick shutters
20.16
-
-
... More
Applying priming coat:
With ready mixed red oxide zinc chromate primer of
approved brand and manufacture on steel galvanised iron/
steel works
21.21
-
-
... More
Finishing with Deluxe Multi surface paint system for interiors and
exteriors using Primer as per manufacturers specifications :
Painting Steel work with Deluxe Multi Surface Paint to
give an even shade. Two or more coat applied @ 0.90 ltr/
10 sqm over an under coat of primer applied @ 0.80 ltr/
10 sqm of approved brand and manufacture
21.21
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat
with approved steel primer all complete.
Fixed to openings /wooden frames with rawl plugs screws etc.
289.08
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes
etc.) trusses etc., including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete.
Hot finished welded type tubes
780.07
-
-
... More
Providing & fixing at all heights, levels and locations colour finish
Aluminium alloy roofing sheets of alloy IS designation 31500, temper
Hx8 conforming to IS 737 and dimensions as per IS code 2676 with
characteristics of good formability and corrosion resistance. The
profile sheets shall be fixed to truss members in slope or required
pitch or curvature with Hex cap headed self drilling/tapping Stainless
steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all
inclusive of labour, scaffolding, T&P and sundries etc. complete as
per directions of the Engineer-In-Charge. (Cost of truss/frame work
shall be paid separately).
0.71 mm, Aluminium Color coated troughed profile with
center to center pitch of 200 mm, depth of 32 mm, overall
profile width1092 mm, cover width 1000mm.
57.21
-
-
... More
Providing and fixing false ceiling at all height including providing and
fixing of frame work made of special sections, power pressed from
M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both
side inclusive) as per IS : 277 and consisting of angle cleats of size
25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at
1200 mm centre to centre, one flange fixed to the ceiling with dash
fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange
of cleat fixed to the angle hangers of 25x10x0.50 mm of required
length with nuts & bolts of required size and other end of angle
hanger fixed with intermediate G.I. channels 45x15x0.9 mm running
at the spacing of 1200 mm centre to centre, to which the ceiling
section 0.5 mm thick bottom wedge of 80 mm with tapered flanges
of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,
shall be fixed in a direction perpendicular to G.I. intermediate channel
with connecting clips made out of 2.64 mm dia x 230 mm long G.I.
wire at every junction, including fixing perimeter channels 0.5 mm
thick 27 mm high having flanges of 20 mm and 30 mm long, the
perimeter of ceiling fixed to wall/partition with the help of rawl plugs
at 450 mm centre, with 25mm long dry wall screws @ 230 mm
interval, including fixing of gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5 x 25
mm at 230 mm c/c, including jointing and finishing to a flush finish
of tapered and square edges of the board with recommended jointing
compound , jointing tapes , finishing with jointing compound in 3
layers covering upto 150 mm on both sides of joint and two coats of
primer suitable for board, all as per manufacturer's specification and
also including the cost of making openings for light fittings, grills,
diffusers, cutouts made with frame of perimeter channels suitably
fixed, all complete as per drawings, specification and direction of
the Engineer in Charge but excluding the cost of painting with :
12.5 mm thick tapered edge gypsum moisture resistant
board
57.21
-
-
... More
ELECTRICAL WORKS
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Group A
29
-
-
... More
Group B
28
-
-
... More
Group C
16
-
-
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop
earthing as required.
135
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
84
-
-
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
VITRIFIED FLOOR TILES
Providing and laying Vitrified tiles in floor in different sizes (thickness to
be specified by the manufacturer) with water absorption less than 0.08%
and conforming to IS:15622, of approved brand & manufacturer, in all
colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:
4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including
grouting the joints with white cement and matching pigments etc. The
tiles must be cut with the zero chipping diamond cutter only . Laying of
tiles will be done with the notch trowel, plier, wedge, clips of required
thickness, leveling system and rubber mallet for placing the tiles gently
and easily.
Glazed vitrified floor tiles polished finish of size
Size of Tile 1200 x 1200 mm
96
-
-
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
20
-
-
... More
Supplying and drawing following sizes of FRLS PVC insulatedcopper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.
mix :
2 x 1.5 sq. mm
120
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed
conduit as required.
20 mm
46
-
-
... More
25 mm
55
-
-
... More
32 mm
48
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 A switch
79
-
-
... More
3 pin 5/6 A socket outlet
4
-
-
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
15
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
32
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
1 or 2 Module (75mmX75mm)
5
-
-
... More
8 Module (125mmX125mm) core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop
earthing as required.
2
-
-
... More
12 Module (200mmX150mm)
4
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required
14
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A
modular switch, connections etc. as required.
2
-
-
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
8
-
-
... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.
8
-
-
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core cable and earthing etc. as required.
58
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth
bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
12 way , Double door
2
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
12
-
-
... More
Double pole
1
-
-
... More
Supplying and fixing single pole blanking plate in the existing
MCB DB complete etc. as required.
2
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mmthick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
1
-
-
... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass
nut bolt & spring washer spaced at 50mm)
16
-
-
... More
Supply of following size Power/Control Copper cables, Solid Copper conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armoured (Galvanised for cables up to 10 x 1.5 sq mm.8 x 2.5 sq mm.2 x 10 sq mm.3 x 10 sq mm.4 x 6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1) (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 3 Core A2XFY
16.00 Sq. mm. Core U.G. armoured cable
51
-
-
... More
Supplying of following type recessed / surface mounted LED light fixture complete with drivers, earthing point complete as required. (Havells or equivalent)
3) 18W LED (S.M)
50
-
-
... More
4) 20 W LED bulb
8
-
-
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
15
-
-
... More
Illumination of Main Gate at Foothill at Geeta Mandir
-
-
-
... More
i) Xoolux Nano—LD10—3000°K—Oval(15°)—IP67, Length: 1021mm24V DC, 25 Watts/Meter, 3000°K
ii) Light Line 20—Flex—L1000—3000°K—IP6724V DC, 10 Watts/Meter
iii) Light Line 20—Flex—L1500—3000°K—IP6724V DC, 15 Watts/Meter
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements