Guwahati Metropolitan Development Authority Tender
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Guwahati Metropolitan Development Authority - GMDA Tender
Eprocure
Opening Date19 Aug 2021
Closing Date18 Sep 2021
Tender Amount₹ 10,77,49,700
Costs
EMD
₹ 21,55,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_GMDA_22626_1Bid Award Id
ViewTender No
GMDA/DEV/20/2021/8Tender Authority
Guwahati Metropolitan Development Authority ViewPurchaser Address
-Website
http://https://gmda.assam.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth/ Sand filling in plinth in layer not more than 150mm thick including necessary, carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, Forest Royalty, Sales Tax and other duties and taxes as may be necessary.
-
-
-
... More
With silt (predominantly non plastic ) by truck carriage including loading and unloading.
1958.14
-
-
... More
SITE GRADING WORKS
-
-
-
... More
Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified.
-
-
-
... More
a) Within Guwahati City
1082.24
-
-
... More
SITE DEVELOPMENT WORKS
-
-
-
... More
Surface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil.
2500
-
-
... More
Jungle clearence including uprooting of vegitation, grass, brush-wood, sapling and trees not exceeding 300mm girth and disposal of the same outside the periphery and lift upto 1500mm
1500
-
-
... More
DISMANTLING WORKS
-
-
-
... More
Demolishing plain cement concrete including disposal of debris as directed for all levels
-
-
-
... More
Prop (1 : 4 : 8) or leaner mix
15
-
-
... More
Prop (1 : 3 : 6) or richer mix
10
-
-
... More
Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels
80
-
-
... More
Demolishing RB work including stacking of steel bars and disposal of unserviceable material as directed for all levels
50
-
-
... More
Extra for cutting reinforcement in RCC or RB work at all levels (Payment to be made on cross sectional area of RCC or RB work obtained by multiplying the length of the cut reinforcement and thickness of the member).
250
-
-
... More
Extra for scraping, cleaning and straightening reinforcement from RCC or RB work at all levels
150
-
-
... More
Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels
112
-
-
... More
Dismantling wood work in frames, trusses, purlins and rafters including stacking the materials as directed by the department for all levels.
12
-
-
... More
Dismantling steel work in single sections (R.S.Joists, channels, angles, tees and flats etc.) including dismembering and stacking the materials as directed by the Department for all levels.
1200
-
-
... More
Dismantling steel work in built up sections in joists, angles, channels, tees, flats etc. including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking the materials as directed by the Department for all levels
175
-
-
... More
Dismantling all types of corrugated/ trapezoidal sheet roofing including ridges, hips, valleys and gutters etc. and stacking the materials as directed by the department for all levels
120
-
-
... More
Demolishing skirting/ dado in walls/ R.C.C. & P.C.C. members without causing damage to walls/ member upto any height including disposal of debris as directed for all levels
25
-
-
... More
Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels.
125
-
-
... More
Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels.
-
-
-
... More
Area of door/window up to 3.00 m2
25
-
-
... More
Area of door/window above 3.00 m2
45
-
-
... More
Dismantling of existing steel windows/ steel ventilators/ steel windows and steel ventilators without damaging the walls, removing to a safe place and necessary repairs to the edges of walls.
12
-
-
... More
Dismantling all types of ceiling, partition and wall lining and stacking the materials as directed by the department for all levels
125
-
-
... More
PCC WORKS
-
-
-
... More
Plain cement concrete works with coarse aggregate, of sizes 13mm to 32mm in foundation bed for footing, steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete(Shuttering where necesary shall be measured and paid separately)
-
-
-
... More
In prop. 1 cement :3 sand : 6 coarse aggregate by volume.
688.42
-
-
... More
Plain cement concrete floor base in prop. 1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing complete
-
-
-
... More
50mm thick
375
-
-
... More
RCC WORK
-
-
-
... More
Providing and laying plain/reinforced cement concrete works with coarse sand & 20mm down aded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately.)
-
-
-
... More
Using mixture machine
-
-
-
... More
In sub-structure upto plinth level.
-
-
-
... More
Foundation, footings, columns with base, tie and plinth beam, pile cap, base, slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.
-
-
-
... More
Without Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.
-
-
-
... More
M20 grade concrete or Prop. 1:1.5:3
5.31
-
-
... More
M25
375.76
-
-
... More
In superstructure from plinth level to 1st floor level.
-
-
-
... More
Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder,bressumer, cantilever, staircase (except spiral stair case and landing) including preparing the top surface and finishing of nosing.
-
-
-
... More
Without Using admixture, plasticiser etc
-
-
-
... More
M25
685.47
-
-
... More
DPC WORK
-
-
-
... More
Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.
253.1
-
-
... More
SHUTTERING AND FORM WORK
-
-
-
... More
Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0m and removal of the same for in-situ reinforced concrete and plain concrete work in.
-
-
-
... More
Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.
-
-
-
... More
Using 25mm thick plank
700.19
-
-
... More
Using 38 mm thick plank
405
-
-
... More
Columns, Pillars, Posts & Strut
-
-
-
... More
Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face
-
-
-
... More
Using 38mm thick plank.
826.8
-
-
... More
Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.
-
-
-
... More
For depth not exceeding 1.0M.
-
-
-
... More
Using 38mm thick plank.
350
-
-
... More
Sides of tie beams, grade beams etc. at or below ground level.
-
-
-
... More
Using 38mm thick plank.
304.8
-
-
... More
Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.
-
-
-
... More
Floors etc. upto 200mm in thickness.
-
-
-
... More
Using 38mm thick plank.
3404
-
-
... More
Vertical surface such as walls (any thickness), parapet walls, partitions, walls of septic tank, inspection pit and the like including attached pilasters, butresses, plinth and string courses and the like.
-
-
-
... More
Using 38mm thick plank.
1099.68
-
-
... More
Staircase with sloping or stepped soffits including risers and stringers but excluding landing. (using 38mm thick Plank)
147.6
-
-
... More
BRICK WORK
-
-
-
... More
Providing brick soling in foundation and under floor with stone/best quality picked jhama bricks, sand packed and laid to level and in panel after preparing the sub-grade as directed including all labour and materials, and if necessary dewatering, complete.
-
-
-
... More
Brick on flat soling
3966.86
-
-
... More
Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed.
-
-
-
... More
In Sub-structure upto plinth level including dewatering if necessary
-
-
-
... More
In prop. 1:4
-
-
-
... More
First class brick with non modolar of class designation 7.5
232.61
-
-
... More
In superstructure above plinth level up to all levels
-
-
-
... More
In proportion 1:4.(1 cement:4 sand)
11.6
-
-
... More
1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)
-
-
-
... More
112mm thick brick wall
-
-
-
... More
In cement mortar in proportion 1:4. (1 cement:4 sand) [First class brick with non modolar of class designation 7.5]
2179.62
-
-
... More
STONE MASONARY WORKS
-
-
-
... More
Stone masonary work in retaining wall, wing wall, abutment, foundation, steps, plinth etc. in cement mortar in prop 1:6 with levelling course of 1:6:12 with both faces hammer dressed including bonding, providing face stone, through stone and centering including racking of joints, curing and supplying and all carriage of stone as directed including payment of forest royalty and sales tax and carriage.
-
-
-
... More
Course Rubble Masonry
247.52
-
-
... More
IRON AND STEEL WORK
-
-
-
... More
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.
(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto all levels)
-
-
-
... More
Other ISI approved TMT reinforcement bar (SAIL/JINDAL STEEL/SHYAM/SAI) ( GARDE OF STEEL-Fe500)
6.37
-
-
... More
From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL
-
-
-
... More
Super Ductile (SD) TMT reinforcement bars
1581.84
-
-
... More
ISI approved Mild steel reinforcement bar(M.S.Bar)
2.9
-
-
... More
FLOORING
-
-
-
... More
Providing , fitting and fixing of thick stone pavers ( ORVI) of size 150mm x 150mm floor tiles of approved quality of specified size, shape and thickness not less than 60mm on floors, skirtings, risers and treads of steps over 12 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)
4235
-
-
... More
Providing, fitting and fixing of wall tiles of approved quality, size, shape and thickness not less than 7.5mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed.
-
-
-
... More
Endura designer collection of Johnson make of size 300mm x 600mm GVT elevation tiles ( Castlestone begie matt,Castlestone moss matt,fieldstone BR matt, Ledgestone begie matt, rockstone gris matt, Spiltstone BR mall)
1256.85
-
-
... More
Providing, fitting and fixing of Johnson make Endura Pool tiles ( Floor/ walls) of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed.
-
-
-
... More
Johnson make Endura Pool Tiles of size 247mm x 122mm ( Black)
402.6
-
-
... More
Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).
-
-
-
... More
Normal range Somany / Orient / Nitco / Asian Make
-
-
-
... More
Of size 200mmx300mm and above
529.2
-
-
... More
Providing VITRIFIED floor tiles of approved quality of specified size, shape and thicness not less than 8mm on floors, skirting, risers and treads of steps over 15mm thick base of cement mortar in prop 1:3 ( 1 cement : 3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika / Pedelite/Rouf) /white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. ( Cement plastering to be measured and paid separately).(Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department
-
-
-
... More
Normal range Somany/ Orient/Nitco /Varmora/VITA/
-
-
-
... More
Of size 600mmx600mm and above
1207.5
-
-
... More
Providing ANTISKID tiles of approved quality sizes,shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 ( 1 Cement : 3 coarse sand) approved make fix with Fix -A-Tiles(Choksey/Sika/Pedelite/Rouf/ white cement complete at all level as specified and directed.
-
-
-
... More
Vitrified Tiles
-
-
-
... More
Deluxe -VC [ Toilet floor & terrace)
258.6
-
-
... More
Providing, fitting and fixing of wall tiles of approved quality, size, shape and thickness not less than 7.5mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed.
-
-
-
... More
Endura designer collection of Johnson make of size 300mm x 600mm GVT elevation tiles ( Castlestone begie matt,Castlestone moss matt,fieldstone BR matt, Ledgestone begie matt, rockstone gris matt, Spiltstone BR mall)
101.64
-
-
... More
Providing Johnson Endura Desingner Collection ( EDC series) floor tiles of approved quality of specified size, shape and thickness not less than 10mm on floors, skirtings, risers and treads of steps over 12 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)
-
-
-
... More
Endura designer collection of Johnson make of size 300mm x 300mm and above ( Flowcept light, Flowcept dual, Flowcept Feature, Vintage Feature, Royal Moss, Royal Rust, Rock cept Light etc.)
323
-
-
... More
Endura designer collection of Johnson make of size 400mm x 400mm and above ( Flowcept light, Flowcept dual, Flowcept Feature, Vintage Feature, Royal Moss, Royal Rust, Rock cept Light etc.)
315
-
-
... More
Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department).
-
-
-
... More
Normal range Somany/ Orient/Nitco /Asian Make/Johnson make
-
-
-
... More
Of size 300mmx300mm and above
851
-
-
... More
MOULDING WORK
-
-
-
... More
Providing single full moulding for marble.
45.6
-
-
... More
Providing round moulding ( top & bottom ) of granite including polish wortk all complete.
230.8
-
-
... More
Providing round moulding ( top & bottom ) of kota stone including polish wortk all complete.
5162
-
-
... More
Providing single full moulding for granite.
156
-
-
... More
Providing double full moulding for granite/ marble
84
-
-
... More
GRANITE WORK
-
-
-
... More
Providing 18mm thick granite slab on vertical face of pedestal laid with edge moulding over 10mm thick base of cement mortar in prop. 1:3 ( 1 Cement : 3 Coarse sand) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as directed with approved quality of shade.
232.05
-
-
... More
MARBLE FLOORING
-
-
-
... More
18mm thick Marble stone slab flooring of sizes 1200 x 1200 including treads and risers of steps, skirting, laid over 20mm thick base of cement plaster 1:6 ( 1 cement : 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slab of specified quality and shade at all levels.
-
-
-
... More
Kumari Slab
15.39
-
-
... More
MARBLE STRIP FOR RAMPS
-
-
-
... More
Providing, Fitting and fixing of marble strip of 18mm thick for ramp of size 125mm strip on floor laid over 10mm thick base of cement mortar in prop. 1:3 ( 1 Cement : 3 Coarse sand) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as directed with approved quality of shade.
16.8
-
-
... More
WALL CLADDING
-
-
-
... More
Providing, Fitting and fixing of Optra Bruno of Johnson make of size 300x600 on vertical face of wall laid over 10mm thick base of cement mortar in prop. 1:3 ( 1 Cement : 3 Coarse sand) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as directed with approved quality of shade.
118.5
-
-
... More
KERB STONE
-
-
-
... More
Providing and laying at or near groundlevel factory made kerb stone of M-25 Grade cement concrete in position to the required line,level and curvature,jointed in cement morter 1:3(1 cement:3 course sand),including making joints with or without grooves(thickness of joints except at sharp curves shall not to more than 5mm),including making drainage opening wherever required complete etc.as per directoin of engineer incharge(length of finished kerb edging shall be measured for payment).(Precast C.C. kerb stone shall be approved by Engineer-in-charge)
133.95
-
-
... More
SUNROCK-HI-CTS / MULTIWYN TILE FOR ENTRANCE PORTION:
-
-
-
... More
Providing polished SUNROCK-Hi CTS/ MULTIWYN tiles of approved quality, size, shape and thickness not less than 18mm on floors and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department).
-
-
-
... More
SUNROCKHi CTS TILES
-
-
-
... More
Well, Chocolate, Diamond Square, Ramp, Beach Sand (300x300) mm
581
-
-
... More
KOTA STONE FLOORING
-
-
-
... More
Kota stone slab of 18 mm thick in riser of steps, skirting, dado and pillars laid with 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete.
-
-
-
... More
550mm x 550mm
1618.03
-
-
... More
TUNCH BRICK WALL TILES
-
-
-
... More
Providing, fitting and fixing of tunch brick wall tiles of approved quality, size, shape on wall of over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed.
-
-
-
... More
TBCL
-
-
-
... More
Rubigo
431.48
-
-
... More
KingsportT
286
-
-
... More
PLASTERING
-
-
-
... More
10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up toall levels including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.
-
-
-
... More
In cement mortar 1:4
6582.48
-
-
... More
15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up toall levels including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.
-
-
-
... More
On rough side
-
-
-
... More
In cement mortar 1:4
5723.92
-
-
... More
Neat cement punning
770
-
-
... More
WALL PUTTY:
-
-
-
... More
Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)
-
-
-
... More
Thickness = 1.0mm thick
8275.6
-
-
... More
PAINTING
-
-
-
... More
Wall painting (two or more coats) with Plastic emulsion paint approved brand and manufacture (Asian/Nerolac/Berger) on new surface to give an even shade after throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.
-
-
-
... More
.Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac, johnson make)
5414.6
-
-
... More
Finishing wall with two or more coats of acrylic emulsion exterior coatings of Unicem "Rakshak" brand of required shade by thinning 1ltr. of paint with 750ml of water to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department.
4859
-
-
... More
Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting.
-
-
-
... More
With ready mixed paint, wood primer (White)
94.5
-
-
... More
Painting two coats( excluding priming coat) on new wood and wood based surface with enemel paint of approved brand and manufacture ( Asian paint/Berge paint/ICI paint/J&K paint/ Nerolac/johnson make) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.
-
-
-
... More
Surfaces over 100mm in width/girth.
-
-
-
... More
High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac/ johnson make)
94.5
-
-
... More
Applying primary coat over new steel and other metal surface over 100mm in width or girth after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.
-
-
-
... More
With ready mixed "red-lead/red oxide" primer.
1490.9
-
-
... More
Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture ( Asian paint/Berger paint/ ICI paint/J&N paint/ Nerolac/johnson) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.
-
-
-
... More
Surfaces over 100mm in width/girth.
-
-
-
... More
General purpose (Asian paint/Berger paint/ ICI paint/J& K paint/Nerolac/ johnson make
1363.18
-
-
... More
Applying one self-priming coat of acrylic emulsion coating of Unicem "Rakshak" brand by thinning 1ltrs of paints with 1ltrs of water over freshly plastered wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth as specified and directed by the department.
687.6
-
-
... More
FALSE CEILING
-
-
-
... More
Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm
-
-
-
... More
thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary).
-
-
-
... More
12.5mm thick
1102
-
-
... More
BAMBOOWOOD FALSE CEILING
-
-
-
... More
Providing & fixing in position Phenol Bamboowood tiles (Made in India) with tiles of size 8 mm thick, 1800 mm length (minimum) and 130 mm wide (minimum) used in False Ceiling Work, Bamboowood tiles having Performance Appraisal Certificate (PAC) issued by Building Material & Technology Promotion Council (BMTPC) with necessary profiled edges; placed under covered shed as suspended ceiling on GI open grid system. Frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of intermediate channel of 15x45x15x0.90 mm size running parallel at 900 mm centre to centre distance and connected with same intermediate channel at 457 mm/cc perpendicular and fixed together with screws and also held in position wit GI 'L' section of 38x38x1 mm thick of length 38mm with screws. Bamboowood tiles 4nos per set having 5 mm gap between two tiles and connected
-
-
-
... More
together with BWR grade ISI mark plywood of section 15x12 mm, two at ends and three in centre after applying D3 category adhesive underside of ply batten and screwed from backside and covered with 2 mm expanded polyethylene foam as upper layment and held in place.GI 'tee' section 24x38x0.9 mm base screwed to plywood section on boh sides and fixed with frame work wit 2.64 mm dia connecting clips and GI fixing bracket of slotted soffit cleat size 27x37x25x1.6 mm through channel and fixed tapping screws to 'tee' frame to held in position. Whole frame work held in suspended form with dash fastener 6 mm x 50 mm with 4 mm dia GI hanger rod having adjustable butterfly clip for levelling and connected with roof truss/ slab with cleat and rawl plugs at 900 mm/cc. All ceiling made smooth level at lendind and tray ceiling as well. Bamboowood tiles in ceiling and ceiling frame all held in place
-
-
-
... More
as per manufacturers design details and finished to smooth as complete ceiling. The Bamboowood tile panels shall have minimum density of 1000 Kg/cum & minimum Hargness 1000 Kgf and finished with Eco friendly UV coating, all complete as per direction of Engineer in-charge.
80
-
-
... More
GLASS PYRAMID ROOFING
-
-
-
... More
Supply, fabrication & erection of MS Pyramid with using SS tube for rafter member, square tube for purlin member as approved design, base plate, anchor fastener, structure shall be painted with one coat of enamel primer & two coats of enamel paint etc. Supply & fixing of 6 + 1.52 PVB + 6 mm clear toughened laminated glass with glazing system with structural silicone and weather silicone sealants., as per our drawing and approximate area .
25.92
-
-
... More
SPACE FRAME
-
-
-
... More
Supplying of Space frame structural grid size 2.0m x 2.0m with solid MS node, MS round pipe ( steel Tube ) to be used in Space mamber shall be ERW midium grade pipe ISI grade with MS high Tensile Hex bolt in 10.9 grade, MS base plate, High Tensile MS lock nut and solid MS prop MS columns, Ms squre tube IS 4923 grade for rufter purline member and all MS member are painted with one coat of enamel primer and two coats of enamel paint and top cladded with 10mm thick multiwall polycarbonate sheet fixing with specially designed aluminium section using with self tapping screws and joints will be with silicone sealanes. As per drawing.
27
-
-
... More
TENSILE STRUCTURE
-
-
-
... More
Design, Supply & Installation of Tensile fabric Structure of Fabric Coverings as per concepts approved by you. The Roof is covered with 650 GSM Type0 FR Tensile Membrane Fabric,with both side PVDF coating, GI Nut/Bolts & other hardware such as MS plates/bolts as per our drawing. for an approximate area. Fabric warranty for 12 years from Serge Ferrai
27
-
-
... More
DOOR FRAME
-
-
-
... More
Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified.
-
-
-
... More
With sal wood
1.55
-
-
... More
ARCHIDPLY LAMYDOOR WORKS
-
-
-
... More
Providing, fitting and fixing 32mm thick ISI marked Archid Lamydoor conforming to IS 2202 (Part-1) core of block board construction with frame of first class hard wood and well matched decorated laminate in both faces of shutter.
-
-
-
... More
32mm thick
47.25
-
-
... More
HARDWARE FITTINGS
-
-
-
... More
Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass
-
-
-
... More
Tower bolts
-
-
-
... More
250mm x 10mm
50
-
-
... More
150mm x 10mm
25
-
-
... More
Door Handles
-
-
-
... More
150mm
50
-
-
... More
Door stopper with rubber stoper
5
-
-
... More
DOOR CLOSER
-
-
-
... More
Providing,fitting and fixing Door closer of various type UL listed and fire rated good quality depending on the door specification.Types like single speed,Double Speed,Heavy Duty etc are available and as directed & specified by the department
-
-
-
... More
Godrej
-
-
-
... More
Single Speed Door Closer( size166.5x 48mmx 67mm)-Model C071
2
-
-
... More
ANTITERMITE TREATMENT
-
-
-
... More
Pre construction anti-termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (Five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contrctor) as per the direction on the Department complete.
-
-
-
... More
With aqueous emulsion having concentration 1:19 with chloropirophos solution (tricel or equivalent) and water ,i.e. 1% solution
851
-
-
... More
Diluting and injecting aqueous emulsion for post constructional anti - termite treatment (necessary tools and accessories to be supplied by the contractors).Along external wall (where apron is not provided) in the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall and rodding etc. by applying the emulsion at 2.5 litres per square meter complete as directed by the Department
-
-
-
... More
with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.
851
-
-
... More
PLINTH PROTECTION
-
-
-
... More
Providing plinth protection with bricks flat laid in cement mortar 1:4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.
125
-
-
... More
SURFACE DRAIN
-
-
-
... More
Providing drain with brick work in cement mortar in prop. 1:4 with half brick thick side walls and 100mm thick C.C. ( 1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shuttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.
-
-
-
... More
300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.
146
-
-
... More
STAINLESS STEEL PIPES
-
-
-
... More
Supply, Fabrication & Erection of SS frame as per drawing with SS304 grade. Members are of different dia also includes SS Base Plate, and SS anchor fasteneretc. as per your requirement.
250
-
-
... More
MS GRATING
-
-
-
... More
Providing fitting and fixing of MS grating of required patern for drain cover with MS flats/ square bars at required spacing in frame all round with MS angle all complete.
4500
-
-
... More
FRP GRATING
-
-
-
... More
Providing, Fiting and fixing of FRP Grating , above drain including cutting where necessary finished complete at all levels as specified and directed.
-
-
-
... More
FRP Grating Size H25 616 X 1220 mm (closed border
30
-
-
... More
FRAMELESS GLASS DOOR
-
-
-
... More
Providing, fitting and fixing frame less glazed doors with 12mm toughened glass . Inncluding hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels.
-
-
-
... More
12mm clear toughened glass
14.4
-
-
... More
GLASS FITTING
-
-
-
... More
Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately)
-
-
-
... More
5.00mm thick.
51.12
-
-
... More
CEMENT BONDED PARTICAL PLANK
-
-
-
... More
Providing, fitting and fixing in position MS RHS of diffrent sizes as per drawings. The plank of 7.5mm thick High pressure steam Cured Non Asbestros fiber cement averest siding planks of Everest Industries Ltd. Make. All works shall be acrried out as per drawings.Rate includes frame works and other necessary materials, all complete.
45
-
-
... More
STRUCTURAL GLAZING
-
-
-
... More
Providing , fabrication and fixing of structural glazing made out of coloured Anodised aluminium mother frame 6 nos 1.2m each @ 1.819 Kg/m and subframe of 16 nos 0.60 m each @ 0.31 Kg/m of Jindal or equivalent and 10 mm thoughen reflective/ clear glass of approved make and shade. The glass to be pasted using structural selicon (DC 995) and weatherseal silicon to be used (DC 789), the structure complete with all accessories as and where necessary.
388.5
-
-
... More
ALUMINIUM CASHMENT WINDOWS
-
-
-
... More
Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels. (Cement concrete to be measured and paid separately).
-
-
-
... More
Side hung and Top hung windows and ventilators
-
-
-
... More
6 mm clear glass
51.12
-
-
... More
RAILING
-
-
-
... More
Providing fitting and fixing Godrej SS 304 grade railing with pipes/ glass for different staircase, cutous areas, balcony, etc. with complete installation, Acrylic finish, etc. which is fitted with mid pipes of good quality steel. Moreover, depending on the requirment glass panels can also be foitted on specific railins. Good quality screws are provided for fixing up the railings.
-
-
-
... More
SS Railing Steel with Wire Locator
27.5
-
-
... More
PILING
-
-
-
... More
Providing cast in-situ manually driven reinforced cement concrete piles of using required grade of cement concrete of required bore-diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings. Reinforcement to be measured and paid seperately
-
-
-
... More
UNIFORM PILE
-
-
-
... More
Pile Dia 400 mm
-
-
-
... More
Upto 10 M
2000
-
-
... More
REINFORCEMENT
-
-
-
... More
Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning, cutting and bending to proper shapes and length as per specifications and drawings. The rings should be welded with vertical reinforcements as per specified IS codes of practice. (Inclusive of lap length, hook, chair, bend, anchor...etc)
-
-
-
... More
TMT bar made of Primary producer (From Primary producer)
209.02
-
-
... More
DEEP TUBE WELL
-
-
-
... More
Labour for test boring with 40mm (internal) dia G.I. Pipes including keeping surplus of earth and every 2.00m after first 3.00m depth and delivering the same in nearest P.W.D. camp in the small tin container (container scaffolding tools etc. will have to be arranged by the contractor at his own cost).
200
-
-
... More
Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department.
-
-
-
... More
Bore hole of 200mm diameter
200
-
-
... More
Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department.
-
-
-
... More
PVC Pipe
-
-
-
... More
SUPREME /PRINCE / FUSION /SFMC Brand
-
-
-
... More
110mm diameter
75
-
-
... More
160mm diameter
250
-
-
... More
Supplying fitting and fixing ISI approved PVC filter 3.00 metre long.
-
-
-
... More
150mm diameter
10
-
-
... More
Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed.
-
-
-
... More
G.I. pipe
-
-
-
... More
TATA / SAIL (Medium)socket should be welded to the pipes
-
-
-
... More
50mm diameter
200
-
-
... More
Supplying fitting and fixing check valve (non return valve) including thread to pipes.
-
-
-
... More
50 mm dia
5
-
-
... More
Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained
1
-
-
... More
Flushing, clearing, washing and watering of the tube well
1
-
-
... More
Supplying including installation, connection as approved by the Deptt., testing and commissioning of SUBMERSIBLE PUMP SET, Single Phase with steel cable rope and submersible cable complete as directed and specified by the deptt.
-
-
-
... More
Single phase Submersible motor pump set (Texmo / Crompton Greaves/ Aquatic/ CRI/ V-Guar suitable for 100 mm bore well and above. 2 HP STAGE 6 to 30 with control panel.
7
-
-
... More
Single phase Submersible motor pump set (Texmo / Crompton Greaves/ Aquatic/ CRI/ V-Guar suitable for 100 mm bore well and above. 2 HP STAGE 6 to 30 with control panel.
2
-
-
... More
Supplying fitting and fixing including necessary connection as approved by the Deptt.)of Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) of following type and capacity as specified and directed by the Department. ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make)
-
-
-
... More
D.O.L Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make)0.5 TO 10 HP, 0.72 TO 20 A.
2
-
-
... More
HORTICULTURE WORKS
-
-
-
... More
LAWN MAKING BY DIBBLING
-
-
-
... More
Supplying and dibbling of selected lawn grass [ Doob grass (Cynodon dactylon), cushion grass (Axonopus affinis)] after preparing the land by ploughing / working to a depth of 40 -45 cm, removing of all unwanted debris ( rubbles, pebbles, plant roots etc.), mixing of organic manure(10kg - 15kg/sq.m), levelling the surface and initial maintenance by proper and periodic rolling, mowing and irrigation etc.( as specified) for a period of six months from the date of dibbling including the application of recommended dose of fertilizers(N:P:K) mixture as specified and directed by the department.
-
-
-
... More
By Doob grass (Cynodon dactylon)
375
-
-
... More
By Carpet grass (Axonopus affinis)
493
-
-
... More
Supplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)
-
-
-
... More
With Fancy leaf caladium/Coleus
-
-
-
... More
Using earthen pot of 30 cm dia.
12
-
-
... More
With Indian rubber plant / Prayer plant
-
-
-
... More
Using earthen pot of 30 cm dia.
12
-
-
... More
With Fragrant dracaena / Silver net leaf / Philodendron / Devil's back bone / Peperomea /Croton
-
-
-
... More
Using earthen pot of 30 cm dia.
12
-
-
... More
With Peacock/spider/Umbrella
-
-
-
... More
Using earthen pot of 30 cm dia.
21
-
-
... More
With Maiden hair fern/Aloe/Boston fern/Swiss cheese plant/Forget me not
-
-
-
... More
Using earthen pot of 30 cm dia.
21
-
-
... More
With Marry Christmas begonia / Polypodium / Aluminium plant
-
-
-
... More
Using earthen pot of 30 cm dia.
21
-
-
... More
HEDGE PLANTING
-
-
-
... More
Supplying and planting of suitable plant materials for preparation protective / external hedge (50 cm wide) including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed .
-
-
-
... More
ADOPTING CROSS WISE DOUBLE ROW PLANTING METHOD
-
-
-
... More
With Duranta
65
-
-
... More
With Kamini
65
-
-
... More
With Chinese Bamboo
65
-
-
... More
With Thuja / Ixora
65
-
-
... More
EDGE PLANTING
-
-
-
... More
Supplying and planting of suitable plant materials for edge making / Internal hedge(20 cm wide) including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed .
-
-
-
... More
ADOPTING CROSS WISE DOUBLE ROW PLANTING METHOD
-
-
-
... More
With Duranta
65
-
-
... More
With Coleus
65
-
-
... More
With Brindavan / Latifolius
65
-
-
... More
With Acalypha wilkesiana
65
-
-
... More
With Acer palmatum
65
-
-
... More
SHRUB PLANTING
-
-
-
... More
Supplying and planting of ornamental shrub ( below 1'-0" height ) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed .
-
-
-
... More
Radhachura / Krishnachura / Rat ki rani / Ixora / Jetuka
18
-
-
... More
Allmanda / Khorika zai / May flower / Kamini / Kathanda / Tecoma / Acalypha / Bougainvillea / Dracaena / Togor / Nilakantha / Mussaenda
18
-
-
... More
Korobi / Azalea
18
-
-
... More
Thuja
18
-
-
... More
Poinsettia / Forget me not
18
-
-
... More
BED PLANTING
-
-
-
... More
Supplying and planting of Dahlia / Chrysanthemum / Gladiolus etc on the ground ( bed planting, bed size 45 cm x 45 cm x 45 cm) including the preparation of the soil, providing organic manure and fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed .
55
-
-
... More
RESTORATION OF SCULPTURE
-
-
-
... More
Repair and refurbishing works of the existing sculpture at park. Rate includes all necessary works for restoration of sculpture.
1
-
-
... More
PABBLES
-
-
-
... More
Providing and placing of river stone pebbles at site of approved quality, size, shape.
30
-
-
... More
SANITARY WORKS
-
-
-
... More
WATER CLOSET
-
-
-
... More
Providing fitting and fixing Vitreous china wall hang water closet (European type W.C pan 400mm high) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)
-
-
-
... More
Hindware make
-
-
-
... More
White
-
-
-
... More
Wall mounted Closet Const (inclusive of seat cover and fittings) Cat. No. 20098(P-23)
16
-
-
... More
URINAL
-
-
-
... More
Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required.
-
-
-
... More
Hindware make
-
-
-
... More
White
-
-
-
... More
FB 610 x 410 x 380 (Cat. No.60002)
4
-
-
... More
DIVISION PLATE
-
-
-
... More
Supplying fiting and fixing vitreous china division plate including fitting and fixing compete as directed and specified.
-
-
-
... More
Hindware make
-
-
-
... More
White
-
-
-
... More
Division Plate 680 x 300 (Cat. No.61001)
4
-
-
... More
WASH BASIN
-
-
-
... More
Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately)
-
-
-
... More
Counter Top Basin
-
-
-
... More
Hindware make
-
-
-
... More
White
-
-
-
... More
Corel 520 Dia (Cat. No.10067)
16
-
-
... More
MIRROR
-
-
-
... More
Providing fitting and fixing Decorative Mirror complete as directed and specified.
-
-
-
... More
Parryware Make / Hindware Make
-
-
-
... More
Size 600mm x 450mm
16
-
-
... More
SOAP DISPENSER
-
-
-
... More
Providing, fitting and fixing Liquid soap dispenser and liquid soap container complete as directed and specified.
-
-
-
... More
Jaquar Make/ Hindware Make
-
-
-
... More
Continental (Cat.No.ACN-1135N) (with glass bottle)
16
-
-
... More
TOWEL RING
-
-
-
... More
Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified.
-
-
-
... More
Jaquar Make
-
-
-
... More
Continental towel ring square (Cat.No. ACN-1121)
16
-
-
... More
BRUSH HOLDER
-
-
-
... More
Providing, fitting and fixing Chrome Plated brush holder complete as directed and specified.
-
-
-
... More
Jaquar Make
-
-
-
... More
Continental (Cat.No. ACN-1143N)
16
-
-
... More
BOTTLE TRAP
-
-
-
... More
Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified.
-
-
-
... More
Jaquar Make
-
-
-
... More
Bottle trap (with internal partition) 32mm size with 300mm long wall connection pipe (Cat.No. ALD-769B)
16
-
-
... More
BIB COCK
-
-
-
... More
Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately)
-
-
-
... More
Jaquar Make
-
-
-
... More
Continental /Clarion
-
-
-
... More
Standard
16
-
-
... More
PILLAR COCK
-
-
-
... More
Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed.
-
-
-
... More
Jaquar Make
-
-
-
... More
Long neck with areator
16
-
-
... More
FLUSH COCK
-
-
-
... More
Supplying fitting and fixing Chrome Plated (C.P.) flush cock of approved brand as directed and specified.(G.I. & C.P pipes will be measured and paid separately)
-
-
-
... More
Jaquar Make
-
-
-
... More
Queen's Collection - Flush cock with lever handle (For VIP use. Prior approval of Chief Engineer PWD (Bldg) must be taken before use)
20
-
-
... More
GRATING
-
-
-
... More
Providing fiting & fixing C.I. Grating to the floors complete as directed and specified.
-
-
-
... More
110mm dia
35
-
-
... More
SINTEX WATER TANK
-
-
-
... More
Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes
-
-
-
... More
5000 Lt capacity
-
-
-
... More
Sintex make
1
-
-
... More
Labour for erecting and placing PCVC Tank over the stagging up to a height of 5.00m complete as directed.
-
-
-
... More
5000 litre capacity
1
-
-
... More
HAND FAUCET
-
-
-
... More
Providing, fitting and fixing hand faucet for toilet att complete.
5
-
-
... More
STOP COCK
-
-
-
... More
Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately)
-
-
-
... More
Jaquar Make
-
-
-
... More
Continental / Clarion
-
-
-
... More
15mm dia Male / Female (long thread)
20
-
-
... More
TOILET PAPER HOLDER
-
-
-
... More
Providing, fitting and fixing Chrome Plated TOILET PAPER holder complete as directed and specified.
-
-
-
... More
Jaquar Make
-
-
-
... More
Continental toilet paper holder (Cat.No. ACN-1151N
16
-
-
... More
PIPING
-
-
-
... More
Supplying Fitting and fixing Mono layer UV stabisised PP-R ( Poly propylene-random copolymer) Pipes, SDR-11 Fusion welded having thermal stability for hot and cold water supply conforming IS 15801-2008 including all plain PP-R fittings and brass threaded PP-R fittings and clamping, cutting and making good to the damages.
-
-
-
... More
Exposed or in trenches
-
-
-
... More
SFMC/ FUSION brand or other brand of equivalent quality.
-
-
-
... More
PN-10 Pipe,32 mm OD,SDR-11
58.4
-
-
... More
PN-10 Pipe,100 mm OD,SDR-11
61
-
-
... More
Concealed pipe with cutting chases & making good the walls
-
-
-
... More
PN-16 Pipe,16mm OD,SDR-7.4
44.25
-
-
... More
PN-16 Pipe,20mm OD,SDR-7.4
37.5
-
-
... More
PN-16 Pipe,25 mm OD,SDR-7.4
33
-
-
... More
PVC PIPES
-
-
-
... More
Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. Rates includes all necessary fittings like bend, Tee, union etc.
-
-
-
... More
Exposed or in trenches
-
-
-
... More
110mm dia.
37
-
-
... More
75mm dia.
37
-
-
... More
50mm dia
15
-
-
... More
Supplying, fitting and fixing Pipes including removing of existing pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed ( Rate includes removing of existing pipes and supplying, refitting of different sizes of pipes for all existing fountain)
1
-
-
... More
C.I. MANHOLE COVER
-
-
-
... More
Providing fitting and fixing 450mm dia 90mm thick C.I. Man hole cover and frame of 58kg. Weight complete as directed and specified.
12
-
-
... More
CHILDREN PLAY EQUIPMENT
-
-
-
... More
Providing,fitting and fixing children playing equipments such as slide,see-saw etc as shown in the drawing with necessary fittings
-
-
-
... More
Slide
4
-
-
... More
See-saw
5
-
-
... More
Two seater horse rider
4
-
-
... More
Rope climber
4
-
-
... More
Chain Swing
4
-
-
... More
Merry Go Round
4
-
-
... More
Revolving Platform 6"Dia
5
-
-
... More
Spiral Outdoor Slide Play Station
4
-
-
... More
Carousel with shade 8.0m dia for 24 persons
4
-
-
... More
INTERNAL ELECTRIFICATION
-
-
-
... More
Supplying, Fabrication, Erection , Testing commissioning of vermin and dust proof (IP-43 protection)totally enclosed cubical type compartmental floor mounting panel board of size 1500mm x 1950mm x 350mm made of 16 SWG(1.66mthick C.R. sheet and 300mm x 30mmx5mm MS Angle having 4 nos legs at the bottom and C.R. sheet roofing on the top complete with 2 coats of Red Oxide metal primer and painting with powder coated paint. The panel board is to be erected in 1 :3:6 PCC foundation including excavation Complete neatly Wiring done, with the provision for the following Electrical Accessories. Provision for 125A 4Pole 25KA 415V MCCB INCOMING. Provision for 1no TPN MCB and 10 nos DP MCB OUTGOING.
-
-
-
... More
3Phase 4K.W.H Meter L& T make)
-
-
-
... More
Single phase K.W.H Meter L& T make)
-
-
-
... More
0-100 Moving Iron Ammeter (Digital)
-
-
-
... More
0-100 Moving Iron Voltmeter (Digital)
-
-
-
... More
Ammeter S/S in 3position
-
-
-
... More
Voltmeter S/S in 3position
-
-
-
... More
Indicator Lamp (R,Y, B)
-
-
-
... More
Cut out
-
-
-
... More
CT,s 100/5
-
-
-
... More
Control Wiring
1
-
-
... More
Incoming and Outgoing MCCB/MCB will be paid extra.
-
-
-
... More
Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
... More
30mA sensitivity DP RCCB
(Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.)
-
-
-
... More
40A
6
-
-
... More
63A
1
-
-
... More
Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
... More
B Series
(Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.)
-
-
-
... More
6 to 32
20
-
-
... More
Supplying with fitting and fixing panel mounting open execution 415V 50Hz 4P MCCB with Microprocessor Release (Ics=Icu, adjustable Over Load and Short Circuit setting, Without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
... More
36KA (ABB, Schneider, legrand, L&T, Siemens, C&S make)
-
-
-
... More
40A
3
-
-
... More
63A
2
-
-
... More
250A
1
-
-
... More
630A
1
-
-
... More
SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) ALUMINIUM tube terminal.
-
-
-
... More
ALUMINIUM tube terminal. Size: 300
16
-
-
... More
Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) .
-
-
-
... More
3 & 1/2 Core A2XFY
-
-
-
... More
300.00 Sq. mm.3 & 1/2 Core armoured U.G. cable
200
-
-
... More
Supplying, installation testing and commissioning of the following rating copper wound indoor / out door type transformer complete including the payment to be made to power supply authority for supervision charge, labour charge, cost of L.T/H.T metering etc. (excluding the cost of load security) and making necessary arrangement for charging approval of the sub-station from the competent authority as directed and specified by the department. Transformer should be as per CEA guidelines as ammended up to date upto 200 KVA star rating up to 5 star, above 200KVA as per CEA guidelines for losses along with LV enclosure.
-
-
-
... More
315 KVA,50Hz.11/0.433 KV. Oil filled transformer with Off Circuit tap change
1
-
-
... More
Supplying fitting and fixing including necessary connection as approved by the Deptt.)of Submersible motor pump set control panel including Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) of following capacity as specified and directed by the Department. (Texmo/ Crompton Greaves/ CRI/ Aqua sub make)
-
-
-
... More
Submersible motor pump set control panel including Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make)0.75HP/ 1HP
4
-
-
... More
Supply with installation & commissioning of readymade maintenance free CPRI approved technology G.I. CHEMRODE ELECTRODE complete with RESLOW Grounding Minerals (25 K and Advance Earth Pit cover (PV including excavation of earth pit and construction brick earth chamber including plastering both inner & outer surface of brick wall as specified and directed by the deptt.
7
-
-
... More
Supplying & laying of following size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.
200
-
-
... More
Supplying and fixing 18 S.W.G sheet steel metal boxes of the following sizes in surface Wiring system with suitable size of 3 mm thickness phenolic laminated sheet cover on the front face of the boxes including painting etc. as required and specified by the department.
-
-
-
... More
100 mm x 150 mm x 60 mm deep (Nominal size)
15
-
-
... More
200 mm x 150 mm x 60 mm deep (Nominal size)
20
-
-
... More
250 mm x 300 mm x 60 mm deep (Nominal size)
24
-
-
... More
Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (ISI marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.
-
-
-
... More
Medium point up to 6.00 metre. Length.
3
-
-
... More
Long point up to 10.00 metre. Length.
1
-
-
... More
Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) with earth continuity in surface/ recessed 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit wiring system.
-
-
-
... More
with 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit.
20
-
-
... More
with 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. in 25 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit
14
-
-
... More
Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system.
-
-
-
... More
With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit.
7
-
-
... More
Supplying and fitting fixing of electric storage water heater [Geyser] of VENUS/ RAMSON/ RACOLD/V Guard/ HAIER or equivalent make) including necessary connection etc. as required complete and as directed by the Department.
-
-
-
... More
Vertical
-
-
-
... More
35 Litre Capacity
1
-
-
... More
Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator].
-
-
-
... More
Premium model 1400 mm Sweep CROMPTON make)
2
-
-
... More
Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as ballast, starter etc. directly on wall / ceiling including connection as approved by the Deptt.)with 1.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed by the department.
-
-
-
... More
Channel type luminaries complete with bright aluminium reflector & decorative silver coloured end caps and Electronic ballast with 1 X 36 watt Fluorescent tube.(Crompton Greaves make) Model- DMLUR14EB SPARKLER with Super Saver Lamp or equivalent PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make.
25
-
-
... More
Supplying, installation, testing and commission of the following outdoor flood light of LED/ MH / HPSV luminaries complete with all accessories such as ballast, capacitor, ignitor and driver as required complete with necessary support / foundation with 2.5 sq.mm. P.V.C. insulated S.C. copper conductor as required and as directed by the department
-
-
-
... More
MVC 502 1 X MHNTD-150W Phillips make) floodlight luminaries with Cast Aluminium housing & toughened glass cover including separate CG box. Or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (Havells/ WIPRO/ BAJAJ/ CROMPTON / HPL/ SOLAR/ JAQUAR make).
40
-
-
... More
Supplying with fitting fixing of following Clean room luminaries of CFL either surface mounting or recessed mounted as specified and directed by the department.
-
-
-
... More
CRFW12218EB(300) 2 X 18 W CFL Crompton make) in surface/ recessed mounted IP 65 bottom open able Clean room luminaries with clear UV resistant acrylic with 2 x 18 W CFL. or equivalent (Equivalent will be selected by the deptt considering the mother items rate PHILIPS/ WIPRO/ JAQUAR make).
15
-
-
... More
Supplying, installation, testing and Commission of the following indoor Decorative recessed typed mirror optics down lighter luminaries complete with all accessories such as ballast, starter etc. In the false ceiling type Armstrong /Gypsum or similar ceiling mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department
-
-
-
... More
18 W, BBS 145 1 X DLM 1100 / 840 PSU- E 220-240 V Phillip make L recessed mounted down lighter with latest LED technology. Or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (equivalent WIPRO/ JAQUAR make).
28
-
-
... More
15W, BBS 170 1 X DLED 5000 PSU-WH Phillip make GREEN LED recessed mounted down lighter with latest LED technology. Or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (equivalent WIPRO/ JAQUAR make).
125
-
-
... More
Supplying fitting and fixing of retrofit LED lamp in the existing luminaries. PHILIPS/ CROMPTON GREAVES/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR make.
-
-
-
... More
SM440L I 15xLED-HB/RGB 24V CQC, CE VAYA COVE Kolor, 0.3 M, CQC/CE/UL
8
-
-
... More
Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting horizontal TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
... More
ABB, Schneider MG, legrand, Hager make)
-
-
-
... More
4 way TPN (8+12) single door
3
-
-
... More
8 way TPN (8+24) single door
2
-
-
... More
Supplying with fitting and fixing Double Pole 240/415V 50Hz AC23A duty double break open execution panel mounting cubical type Switch Disconnection as approved by the Deptt.tor Fuse Unit(IP-20 protection) with HBC fuse of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
... More
C&S, Havells, Indo Asian, HPL, GECO make)
-
-
-
... More
32A
8
-
-
... More
Supplying with fitting and fixing Four Pole/TP switched neutral 415V 50Hz AC23A duty double break open execution panel mounting cubical type Switch Disconnection as approved by the Deptt.tor Fuse Unit(IP-20 protection) with HBC fuse of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
... More
C&S, Havells, Indo Asian, HPL, GECO make)
-
-
-
... More
600A
1
-
-
... More
Supply and fixing of 19 mm dia 1.50mm to 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) on surface system including painting etc as required:
197.95
-
-
... More
Supply and fixing of 25 mm dia 1.50mm to 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) on surface system including painting etc as required:
500
-
-
... More
Supply and fixing 32 mm mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) on surface system including painting etc as required:
1000
-
-
... More
Supplying fitting and fixing industrial Plug & Socket in surface mounting SPN sheet steel powder painted MCB DB incorporated with MCB DIN rail, neutral link Earth bar of the following rating of DP MCB complete with making necessary connection etc. as specified and directed by the Deptt.
-
-
-
... More
20A Capacity. (ABB, Schneider MG, legrand, Hager make)
14
-
-
... More
Supplying with fitting fixing of 6 amp one way modular clip in bell push MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.
120
-
-
... More
Supplying and fixing of Jaquar outdoor light (or equivalent as approved by the Deptt.) complete with Shade, holder, back plate including connection as required.
-
-
-
... More
Outdoor (Eleanor) Round brick light 416G9ngg
14
-
-
... More
Wiring for light/ fan/ call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 2 mm thick 20mm dia rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) in GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete
-
-
-
... More
Short point up to 3.00 metre. length.
100
-
-
... More
Medium point up to 6.00 metre. Length.
100
-
-
... More
Long point up to 10.00 metre. Length.
119
-
-
... More
Wiring for 5 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 2 mm thick 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.)
-
-
-
... More
Long point up to 10.00 metre. Length.
14
-
-
... More
D.G.Set with 300KVA
1
-
-
... More
Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt.
27
-
-
... More
AIR CONDITIONING WORKS
-
-
-
... More
Supply installation testing and commission of Energy Efficient Air-cooled Screw Chilling Package for HVAC Work including high and low side works complete.
-
-
-
... More
Energy Efficient Air-cooled Screw Chilling Package:
Supply of Factory Assembled Microprocessor based Energy Efficient Air-cooled Screw Chilling Package consisting of the following: One Semi-hermetic Screw Compressor. Air-cooled Condenser with Condenser Fans. Shell and Tube type Flooded Chillers with Thermo excel Copper Tube. One Microprocessor Control Panel with built in Starter for the above Compressor and the Safety Controls like HP/LP, Oil Safety, Operating and Antifreeze Thermostat. Refrigeration piping with Cupper pipe , fittings, liquid line strainers and refrigeration controls.
-
-
-
... More
2 Floor mounted Double Skinned AHU:
-
-
-
... More
Supply of following Floor Mounted Double Skinned AHUs (50mm of WC S.P.) each consisting of the following and having 25mm thick PUF insulated extruded Aluminium section frame construction: Fan Section with forward curve fan & TEFC Sq. Cage Induction
-
-
-
... More
Motor.
-
-
-
... More
Coil Section with 4 Row deep Chilled Water Cooling Coils.
-
-
-
... More
Filter Section with washable Pre-filters.
-
-
-
... More
Sandwiched Drain Pan.
-
-
-
... More
8,000CFM Floor Mounted AHU.
-
-
-
... More
6,000CFM Floor Mounted AHU.
-
-
-
... More
1 Energy Efficient Air-cooled Screw Chilling Package:
-
-
-
... More
Installation, testing & commissioning of Factory Assembled Microprocessor based 130TR Nominal Capacity Energy Efficient Air-cooled Screw Chilling Package consisting of the following: One Semi-hermetic Screw Compressor. Air-cooled Condenser with Condenser Fans. Shell and Tube type Flooded Chillers with Thermo excel Copper Tube. One Microprocessor Control Panel with built in Starter for the above Compressor and the Safety Controls like HP/LP, Oil Safety, Operating and Antifreeze Thermostat.
Refrigeration piping with Cupper pipe , fittings, liquid line strainers and refrigeration controls.
-
-
-
... More
2 Chilled Water Pumps:
-
-
-
... More
SITC of Beacon make Back Pull out Chilled Water Pump of required capacity with CI Impeller along with ABB/Kirloskar or equivalent make Sq. Cage Induction Motor complete with MS Base Frame & Coupling.
-
-
-
... More
(1W+ 1S)
-
-
-
... More
3 Floor Mounted Double Skinned AHU:
-
-
-
... More
Installation, testing & commissioning of following Floor Mounted Double Skinned AHUs (50mm of WC S.P.) each consisting of the following and having 25mm thick PUF insulated extruded Aluminium section frame construction: Fan Section with forward curve fan & TEFC Sq. Cage Induction Motor. Coil Section with 4 Row deep Chilled Water Cooling Coils. Filter Section with washable Pre-filters.
-
-
-
... More
8,000CFM Floor Mounted AHU.
-
-
-
... More
6,000CFM Floor Mounted AHU.
-
-
-
... More
4 Fan Coil Units:
-
-
-
... More
SITC of following Fan Coil Units along with Canvas connection , Ball Valves, Copper piping, Drain connection including electrical Wiring & connection
-
-
-
... More
2TR nominal capacity Fan Coil Unit.
-
-
-
... More
1.5TR nominal capacity Fan Coil Unit.
-
-
-
... More
1TR nominal capacity Fan Coil Uni
-
-
-
... More
5 Motorised Valves & Thermostat for FCU:
-
-
-
... More
Supply and fixing Honeywell make Motorized Valve along with Thermostat and 3 Speed Fan Switch for the Fan Coil Units.
-
-
-
... More
6 Insulated MS Chilled Water Piping:
-
-
-
... More
Supply, fabrication and erection of following Chilled Water Piping including providing JINDAL or equivalent make ‘C’ Class MS pipe , Fittings and welding arrangement. Supply and fixing insulation with 50mm thick TF Polystyrene covering with sand cement plaster.
-
-
-
... More
150mm dia ‘C’ Class MS pipe
-
-
-
... More
125mm dia ‘C’ Class MS pipe
-
-
-
... More
100mm dia ‘C’ Class MS pipe
-
-
-
... More
80mm dia ‘C’ Class MS pipe
-
-
-
... More
65mm dia ‘C’ Class MS pipe
-
-
-
... More
50mm dia ‘C’ Class MS pipe
-
-
-
... More
40mm dia ‘C’ Class MS pipe
-
-
-
... More
32mm dia ‘C’ Class MS pipe
-
-
-
... More
25mm dia ‘C’ Class MS pipe
-
-
-
... More
20mm dia ‘C’ Class MS pipe
-
-
-
... More
7. Motorised Mixing Valves for AHU:
-
-
-
... More
Supply and fixing of following Motorised Mixing Valves with Proportional Thermostat including providing necessary fittings and welding arrangement:
-
-
-
... More
65mm dia 3 Way Motorised Mixing Valve.
-
-
-
... More
50mm dia 3 Way Motorised Mixing Valve.
-
-
-
... More
8. Valves & Strainers:
-
-
-
... More
Supply and fixing of following Valves & Strainers in the above Chilled Water Piping including providing necessary fittings and welding arrangement:
-
-
-
... More
150mm dia Audco make Butterfly Valves.
-
-
-
... More
80mm dia Audco make Butterfly Valves
-
-
-
... More
65mm dia Audco make Butterfly Valves
-
-
-
... More
50mm dia Ball Valves.
-
-
-
... More
150mm dia Dual Plate NR Valves
-
-
-
... More
150mm dia “Y” Strainer.
-
-
-
... More
80mm dia “Y” Strainer.
-
-
-
... More
65mm dia “Y” Strainer.
-
-
-
... More
12mm dia Manual Air vent
-
-
-
... More
9 Pressure Gauges & Floor mounted:
-
-
-
... More
Supply and fixing of following Pressure Gauges & Thermometers including providing necessary fittings and welding arrangement:
-
-
-
... More
100mm dial Pr. Gauge with Pet Cock.
-
-
-
... More
Steam type Thermometer.
-
-
-
... More
10 PVC Condensate Drain Piping:
-
-
-
... More
Supply and fixing Drain Piping for the Air Handling Units and Fan Coil Units.
-
-
-
... More
40mm dia PVC Drain Piping.
-
-
-
... More
25mm dia PVC Drain Piping.
-
-
-
... More
11 Expansion Tank:
-
-
-
... More
Supply and installation 500Ltr. capacity HDPE Expansion Tank along with 1No. Float Valve. Insulating the Tank with 50mm thick TF Polystyrene covering with sand cement plaster.
-
-
-
... More
12 Sheet Metal ducting:
-
-
-
... More
Design, fabrication and erection of following GI/ Al sheet metal ducting including providing necessary supports.
-
-
-
... More
22G GI Sheet.
-
-
-
... More
24G GI Sheet.
-
-
-
... More
13 Grilles, Diffusers & Dampers:
-
-
-
... More
Supply and fixing the following Grilles, Diffusers & Dampers.
-
-
-
... More
Powder Coated Extruded Aluminium Diffusers without VCD.
-
-
-
... More
Powder Coated Extruded Aluminium Grilles without VCD.
-
-
-
... More
MS Volume Control Damper for Grilles/ Diffusers.
-
-
-
... More
Fusible link type GI Fire Damper.
-
-
-
... More
MS Volume Control Duct Damper.
-
-
-
... More
Fresh Air Volume Control Damper with Cowl & Bird Screen.
-
-
-
... More
14 Duct Insulation
-
-
-
... More
Supply & fixing the following Duct insulation.
-
-
-
... More
Thermal insulation with 50mm thick Al Foil faced Fibreglass of 24Kg/ Cu.Mtr density.
-
-
-
... More
Thermal insulation with 25mm thick Al Foil faced Fibreglass of 24Kg/ Cu.Mtr density.
-
-
-
... More
Acoustic insulation with 12mm thick Fibreglass of 48Kg/ Cu.Mtr density covering with 30G Al Perforated Sheet
-
-
-
... More
15 Electrical Panel Board
-
-
-
... More
SITC of Floor Mounted Electrical Panel Board consisting of 1No. Main Incoming SFU along with C.T., Selector Switch, Voltmeter, Ammeter, Phase Indicating Lamps, Al Bus bar for Incoming, 2Nos. SFU for 130TR Screw Chilling Packages and 2Nos. SFU with S/D Starter for Chilled Water Pumps.
-
-
-
... More
SITC of Wall Mounted Electrical Panel Board consisting of 1No. Main Incoming SFU along with C.T., Selector Switch, Voltmeter, Phase Indicating Lamps, Ammeter, On/Off Indicating Lamps and DOL Starter for Floor Mounted Air Handling Units.
-
-
-
... More
16 Power & Control Cabling:
-
-
-
... More
Supply, laying and termination of the following Power & Control Cable.
-
-
-
... More
3 ½ Core 300 Sq.mm Al Power Cable.
-
-
-
... More
3 Core 6 Sq.mm Al Power Cable.
-
-
-
... More
3 Core 1.5 Sq.mm Cu Control Cable.
-
-
-
... More
2 Core 1.5 Sq.mm Cu Control Cable.
-
-
-
... More
8 SWG GI cable for Earthing.
45.68
-
-
... More
EXTERNAL ELECTRIFICATION
-
-
-
... More
TRANSFORMER
-
-
-
... More
Supplying, installation testing and commissioning of the following rating copper wound indoor / out door type transformer complete including the payment to be made to power supply authority for supervision charge, labour charge, cost of L.T/H.T metering etc. (excluding the cost of load security) and making necessary arrangement for charging approval of the sub-station from the competent authority as directed and specified by the department. Transformer should be as per CEA guidelines
-
-
-
... More
400 KVA,50Hz.11/0.433 KV. Oil filled transformer with Off Circuit tap change.
1
-
-
... More
MAIN PANEL
-
-
-
... More
Supplying, Fabrication, Erection , Testing commissioning of vermin and dust proof (IP-43 protection)totally enclosed cubical type compartmental floor mounting panel board made of 16 SWG(1.66mthick C.R. sheet and 300mm x 30mmx5mm MS Angle having 4 nos legs at the bottom and C.R. sheet roofing on the top complete with 2 coats of Red Oxide metal primer and painting with powder coated paint. The panel board is to be erected in 1 :3:6 PCC foundation including excavation Complete neatly Wiring done, with the provision for the following Electrical Accessories. Provision for 4Pole 25KA 415V MCCB INCOMING. Provision for 1no TPN MCB and 30 nos 4P MCCB OUTGOING.
-
-
-
... More
3Phase 4K.W.H Meter L& T make)
-
-
-
... More
Single phase K.W.H Meter L& T make)
-
-
-
... More
0-100 Moving Iron Ammeter (Digital)
-
-
-
... More
0-100 Moving Iron Voltmeter (Digital)
-
-
-
... More
Ammeter S/S in 3position
-
-
-
... More
Voltmeter S/S in 3position
-
-
-
... More
Indicator Lamp (R,Y, B)
-
-
-
... More
Cut out
-
-
-
... More
Control Wiring
1
-
-
... More
Incoming and Outgoing MCCB/MCB will be paid extra
-
-
-
... More
Cost is inclusive of supplying of following size Cable Gland,Lugs and required size cadmium coated nuts and bolts, flat washer, spring washer with 25% extra.
-
-
-
... More
FEEDER PANEL
-
-
-
... More
Supplying installation testing and commissioning outdoor feeder panel with provision for Incomer ) Incomer 160A ( 1 no. Outgoing 100A ( 3 nos)
-
-
-
... More
ENCLOSURES:- width 350mm height 1200mm
-
-
-
... More
Rugged, corrosion-resistant enclosures, made of hot-dip galvanized sheet steel according to standards: ISO 1461, IEC 60439-1and IEC 60439-5 for environment classed C1 and C2 to, ISO 12944-2.All below-ground parts have heavy-duty corrosion protection. To ensure an attractive and functional installation in the ground, A marking label indicates the ground level. With this type of installation, consideration must be given to the risk of condensation, dust, vibration and impacts. The ability of the enclosure to withstand external blows and impacts has been checked by testing at–50° C in accordance with the requirements for use in an Arctic climate in IEC 60439-5.The enclosure should have locking arrangement.
-
-
-
... More
Enclosures should satisfy below requirements
-
-
-
... More
Passes arctic climate tests.
-
-
-
... More
The embossed areas on the door are compatible with most common marking systems.
-
-
-
... More
Should have a option in upper section which can be used to house kWh meters or fitted with a mounting plate for various purposes
-
-
-
... More
Degree of protection IP34D.
-
-
-
... More
BUSBARS
-
-
-
... More
With protection (IP2X) against accidental contact. Bus bars of continuously extruded aluminium sections, insulated with a layer of polyamide. The busbar has a screen-protected contact slot. This ensures safety regardless of where on the busbar the switching device is placed. Bus bars are available with rated currents from 400 to 2500 A. Rated current for phase- and neutral busbars. The stated rated current refers to the highest permitted current in any section of the busbar.
-
-
-
... More
SHOCK PROOF BUSBARS
-
-
-
... More
SWITCHING DEVICES
-
-
-
... More
Switching devices are available for both dazed and blade fuses. The switching devices can be arranged in any order, regardless of rated current. All parts have a high degree of protection and are safe.
-
-
-
... More
Switching devices 100-1600 A.
-
-
-
... More
Easy to add new switching devices to existing distribution boards.
-
-
-
... More
Always voltage-free (“dead”) when changing fuses
-
-
-
... More
Switching devices and bus bars combine to form a modular system. Each Module is 12.5 mm.
-
-
-
... More
The compact design of the switching devices make)s them suitable for use in many
-
-
-
... More
Different types of distribution boards.
-
-
-
... More
All switching devices have a utilization category so that they can be used in cable distribution cabinets, substations and other distribution boards.
-
-
-
... More
AC-23B according to IEC 60947-3
-
-
-
... More
Possibility for parallel operation Tested up to 1000 V for installation in dry environments
-
-
-
... More
Should be in compact in nature
-
-
-
... More
Should have the facility of isolating the all the fuses at one time with robust insulating arrangement. As per drawing below
-
-
-
... More
All switching devices come complete with terminal connection for both copper and aluminium conductors. for aluminium conductors have been tested to Swedish Standard SEN 24 15 10 equivalent to VDE 0220/1 or IEC 61238-1.
-
-
-
... More
Adapter for circuit-breaker type Tmax T3 for 250 A & T5 630 A from ABB SACE.
-
-
-
... More
Degree of protection IP2X.
-
-
-
... More
Allows circuit-breakers to be mounted on a live busbar system
-
-
-
... More
Fits to all Kabeldon bus bars.
-
-
-
... More
Meets the requirements of IEC 60947-1.
-
-
-
... More
Development of creep age current resistant materials
-
-
-
... More
Outdoors, cable accessories are exposed to major stresses, e.g. UV radiation from the sun and creep age currents caused by precipitation and pollution. cable accessories are installed everywhere on the face of the planet: in humid tropical environments, in extreme cold or in the scableling salt mist of coastal regions. Materials and designs for outdoor use that are only minimally Effected by external factors. In the case of cable terminations, it is the insulators,
-
-
-
... More
Both in porcelain and composite material. Products are to be tested under outdoor weather conditions
3
-
-
... More
Switchgear will be paid separately
-
-
-
... More
MCCB
-
-
-
... More
Supplying with fitting and fixing panel mounting open execution 415V 50Hz 4P MCCB with Microprocessor Release (Ics=Icu, adjustable Over Load and Short Circuit setting, Without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
... More
50KA (ABB, Schneider, legrand, L&T, Siemens, C&S make)
-
-
-
... More
800A
1
-
-
... More
Supplying with fitting and fixing panel mounting open execution 415V 50Hz 4P MCCB with Microprocessor Release (Ics=Icu, adjustable Over Load and Short Circuit setting, Without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
... More
36KA (ABB, Schneider, legrand, L&T, Siemens, C&S make)
-
-
-
... More
40A
4
-
-
... More
63A
12
-
-
... More
100A
2
-
-
... More
250A
1
-
-
... More
RCCB
-
-
-
... More
Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz 4P RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
... More
30mA sensitivity 4P RCCB
(Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.)
-
-
-
... More
40A
10
-
-
... More
ISOLATOR
-
-
-
... More
Supplying with fitting and fixing Four Pole switched neutral 415V 50Hz AC23A duty double break open execution panel mounting cubical type Switch Disconnection as approved by the Deptt.tor Fuse Unit (IP-20 protection) with HBC fuse of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
... More
C&S, Havells, Indo Asian, HPL, GECO make)
-
-
-
... More
32A
9
-
-
... More
63A
2
-
-
... More
250A
1
-
-
... More
Supplying with fitting and fixing Four Pole/TP switched neutral 415V 50Hz AC23A duty double break open execution panel mounting cubical type Switch Disconnection as approved by the Deptt.tor Fuse Unit(IP-20 protection) with HBC fuse of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
... More
C&S, Havells, Indo Asian, HPL, GECO make)
-
-
-
... More
800A
1
-
-
... More
MCB
-
-
-
... More
Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
... More
C Series
(Schneider MG, legrand, Hager make)
-
-
-
... More
10A
79
-
-
... More
Supplying with fitting and fixing TPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
... More
C Series (ABB, Schneider MG, legrand, Hager make)
-
-
-
... More
20A
27
-
-
... More
LDB
-
-
-
... More
Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting horizontal TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.
-
-
-
... More
ABB, Schneider MG, legrand, Hager make)
-
-
-
... More
4 way TPN (8+12) single door
4
-
-
... More
6 way TPN (8+24) single door
3
-
-
... More
12 way TPN (8+36) single door
4
-
-
... More
PLUG SOCKET
-
-
-
... More
Supplying fitting and fixing industrial Plug & Socket in surface mounting SPN sheet steel powder painted MCB DB incorporated with MCB DIN rail, neutral link Earth bar of the following rating of DP MCB complete with making necessary connection etc. as specified and directed by the Deptt.
-
-
-
... More
20A Capacity. (ABB, Schneider MG, legrand, Hager make)
30
-
-
... More
Supplying including installation of socket outlet 6/10/13 Amps INTERNATIONAL SOCKET , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.
155
-
-
... More
SWITCH
-
-
-
... More
Supplying with fitting fixing of 6/10 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department
1095
-
-
... More
Supplying with fitting fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.
30
-
-
... More
Supplying with fitting fixing of blank plate single in modular switch system , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.
250
-
-
... More
SWITCH BOARD
-
-
-
... More
Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department.
-
-
-
... More
8 module type Metal
70
-
-
... More
9 module type Metal
31
-
-
... More
FRONT PLATE
-
-
-
... More
Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department.
-
-
-
... More
8 module
70
-
-
... More
9 module
31
-
-
... More
MAIN WIRING
-
-
-
... More
Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system.
-
-
-
... More
With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
300
-
-
... More
SUB MAIN WIRING
-
-
-
... More
Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.
-
-
-
... More
With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
500
-
-
... More
With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
300
-
-
... More
POINT WIRING
-
-
-
... More
Wiring for light/ fan/ call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 2 mm thick 20mm dia rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) in GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete
-
-
-
... More
Short point up to 3.00 metre. length.
230
-
-
... More
Medium point up to 6.00 metre. Length.
185
-
-
... More
Long point up to 10.00 metre. Length.
162
-
-
... More
Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (ISI marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.
-
-
-
... More
Short point up to 3.00 metre. length.
55
-
-
... More
ILLUMINATION FOR ENTRANCE
-
-
-
... More
Supply, Installation, testing and Commissioning of IP 66 architectural mounted LED Spot Light fixture operating on 230 V AC Mains with Operating Voltage range between 100 V AC to 240 V AC. Power Supply should be integral part of the luminaire and should have 80% Efficiency with Power Factor of 0.9. Max power consumption of 35W using RGBmW LEDs. Luminaire shall be with tunable white of 2000k to 1000k also 5 million colours by mixture of RGB LEDS. Luminarie with Die cast aluminium housing & clear glass cover. The lumen output of the product with 20° - 25° lens should be 1200lm and luminaire should have CE/CB & UL Certification. The luminaire shall be with system efficacy of 40 lm / W (All Channels Full On). The luminarie operating temperature shall be 0 to 50 °C. The luminaire shall be able to deliver greater than 160 lux / 15 fc at 24 ft from luminaire with a beam width of 18 ft in vertical plane.
-
-
-
... More
The fixture weight should be less than 6Kg and dimensions should be less than 300 x 220x 190 mm. The light fixture connections should be via unified mains voltage & control data cable e.g. Line, Neutral, Earth & Data and should be programmable using 8 bit or 16 bit control with DMX512 protocol as per the lighting sequence required for desired theme creation. The luminaire should have CE/CB & UL certification. The luminaire manufacturer shall provide polar diagrams and photometric data in various formats including IES file format in accordance with IES LM 79. BIS approval for the luminaire needs to be submitted for records
2
-
-
... More
Supply, Installation, Testing and Commissioning of Data formatting device specifically designed for luminaires operates on the same technology[single-cable line voltage opertion] suitable for Power I / p - 100-240V AC, 50-60 Hz,Max connected load- 16A,Internal loss not to exceed -20W,Heat dissipiation
-
-
-
... More
should be in the order of 10W max Ambient temperature - 0°C- 50°C ,Data i/p interface - DMX / Ethernet ,Protection rating - IP 66 (Suitable for humid / raining locations),Input Voltage 100 – 277 VAC, auto-ranging, 50 / 60 Hz, Maximum Dimensions (Height x Width x Depth)-90 x 300 x 150 mm,Weight -3.0KG,Construction -Cast aluminum enclosure with slots for surface mounting.Soft Copy of Catalogues along with Link of the official web page ,Test Certificates -UL, Third Party IEC test certificates is mandatory.
1
-
-
... More
Supply, Installation, testing and Commissioning of Slim and flexible IP 66 LED strip Light fixture operating on 24V DC Mains with 2.5W per feet. Luminaire CCT shall be 3000k . Luminarie with extruded silicon housing & frosted silicon lens. The lumen output of the product with 120° should be 250lm per feet. The luminaire shall be with system efficacy of 95 lm / W (All Channels Full On).
-
-
-
... More
The luminarie operating temperature shall be 0 to 50 °C. The luminaire shall be able to deliver greater than 35 lux / 3.5 fc at 5 ft from luminaire with a beam width of 105 ft in both plane. The fixture weight should be less than 1Kg and dimensions should be less than 13 x 5000x 10 mm. The luminarie shall be provided with neccessary leader cable and IP rated driver. The luminaire manufacturer shall provide polar diagrams and photometric data in various formats including IES file format in accordance with IES LM 79. BIS approval for the luminaire needs to be submitted for records.
1
-
-
... More
ILLUMINATION FOR DANCING SCULPTURES
-
-
-
... More
Supply, Installation, testing and Commissioning of IP 66 architectural mounted LED Spot Light fixture operating on 230 V AC Mains with Operating Voltage range between 100 V AC to 240 V AC. Power Supply should be integral part of the luminaire and should have 80% Efficiency with Power Factor of 0.9. Max power consumption of 18W using RGB LEDs.
-
-
-
... More
Luminarie with Die cast aluminium housing & clear tempered glass cover. The lumen output of the product with 20° - 25° lens should be 400lm and luminaire should have CE/CB & UL Certification. The luminaire shall be with system efficacy of 40 lm / W (All Channels Full On). The luminaire shall be able to deliver greater than 160 lux / 15 fc at 24 ft from luminaire with a beam width of 18 ft in vertical plane. The luminarie operating temperature shall be 0 to 50 °C. The fixture weight should be less than 6Kg and dimensions should be less than 300 x 220x 190 mm
-
-
-
... More
The light fixture connections should be via unified mains voltage & control data cable e.g. Line, Neutral, Earth & Data and should be programmable using 8 bit or 16 bit control with DMX512 protocol as per the lighting sequence required for desired theme creation. The luminaire should have CE/CB & UL certification. The luminaire manufacturer shall provide polar diagrams and photometric data in various formats including IES file format in accordance with IES LM 79. BIS approval for the luminaire needs to be submitted for records.
3
-
-
... More
Supply, Installation, Testing and Commissioning of Data formatting device specifically designed for luminaires operates on the same technology[single-cable line voltage opertion] suitable for Power I / p - 100-240V AC, 50-60 Hz,Max connected load- 16A,Internal loss not to exceed -20W,Heat dissipiation should be in the order of 10W max Ambient temperature - 0°C- 50°C ,Data i/p interface - DMX / Ethernet ,Protection rating - IP 66 (Suitable for humid / raining locations),Input Voltage 100 – 277 VAC, auto-ranging, 50 / 60 Hz, Maximum Dimensions (Height x Width x Depth)-90 x 300 x 150 mm,Weight -3.0KG,Construction -Cast aluminum enclosure with slots for surface mounting.Soft Copy of Catalogues along with Link of the official web page ,Test Certificates -UL, Third Party IEC test certificates is mandatory.
1
-
-
... More
ILLUMINATION FOR ENTRANCE NEHRU STATUE
-
-
-
... More
Supply, Installation, testing and Commissioning of IP 66 architectural mounted LED Spot Light fixture operating on 230 V AC Mains with Operating Voltage range between 100 V AC to 240 V AC. Power Supply should be integral part of the luminaire and should have 80% Efficiency with Power Factor of 0.9. Max power consumption of 35W using RGBmW LEDs
-
-
-
... More
Luminaire shall be with tunable white of 2000k to 1000k also 5 million colours by mixture of RGB LEDS. Luminarie with Die cast aluminium housing & clear glass cover. The lumen output of the product with 20° - 25° lens should be 1200lm and luminaire should have CE/CB & UL Certification. The luminaire shall be with system efficacy of 40 lm / W (All Channels Full On). The luminarie operating temperature shall be 0 to 50 °C.
-
-
-
... More
The luminaire shall be able to deliver greater than 160 lux / 15 fc at 24 ft from luminaire with a beam width of 18 ft in vertical plane. The fixture weight should be less than 6Kg and dimensions should be less than 300 x 220x 190 mm. The light fixture connections should be via unified mains voltage & control data cable e.g. Line, Neutral, Earth & Data and should be programmable using 8 bit or 16 bit control with DMX512 protocol as per the lighting sequence required for desired theme creation. The luminaire should have CE/CB & UL certification. The luminaire manufacturer shall provide polar diagrams and photometric data in various formats including IES file format in accordance with IES LM 79. BIS approval for the luminaire needs to be submitted for records.
2
-
-
... More
Supply, Installation, Testing and Commissioning of Data formatting device specifically designed for luminaires operates on the same technology[single-cable line voltage opertion] suitable for Power I / p - 100-240V AC, 50-60 Hz,Max connected load- 16A,Internal loss not to exceed -20W,Heat dissipiation should be in the order of 10W max Ambient temperature - 0°C- 50°C ,Data i/p interface - DMX / Ethernet ,Protection rating - IP 66 (Suitable for humid / raining locations),Input Voltage 100 – 277 VAC, auto-ranging, 50 / 60 Hz, Maximum Dimensions (Height x Width x Depth)-90 x 300 x 150 mm,Weight -3.0KG,Construction -Cast aluminum enclosure with slots for surface mounting.Soft Copy of Catalogues along with Link of the official web page ,Test Certificates -UL, Third Party IEC test certificates is mandatory.
1
-
-
... More
Supply, Installation, testing and Commissioning of Slim and flexible IP 66 LED strip Light fixture operating on 24V DC Mains with 2.5W per feet. Luminaire CCT shall be 3000k . Luminarie with extruded silicon housing & frosted silicon lens. The lumen output of the product with 120° should be 250lm per feet. The luminaire shall be with system efficacy of 95 lm / W (All Channels Full On). The luminarie operating temperature shall be 0 to 50 °C.
-
-
-
... More
The luminaire shall be able to deliver greater than 35 lux / 3.5 fc at 5 ft from luminaire with a beam width of 105 ft in both plane. The fixture weight should be less than 1Kg and dimensions should be less than 13 x 5000x 10 mm. The luminarie shall be provided with neccessary leader cable and IP rated driver. The luminaire manufacturer shall provide polar diagrams and photometric data in various formats including IES file format in accordance with IES LM 79. BIS approval for the luminaire needs to be submitted for records.
2
-
-
... More
Supply, Installation, Testing and Commissioning of Four Feet Length RGB LED linear grazing luminaire low power with housing material of extruded aluminium, dark grey anodized finish, system wattage not exceeding 30W and system lumen output of not less than 600 lumens. Fixture shall be available with architectural optics with choice of beam angles of Elliptical 25 - 30° x 80 - 85° or wide 120°beam angles. Fixture shall operate in a temperature range of 0°C to 40°C. Fixture shall have auto-ranging input voltage for 100 – 240 VAC.
-
-
-
... More
The luminaire shall be able to deliver greater than 10 lux / 1 fc at 16 ft from luminaire with a beam width of 28 ft in vertical plane and 7ft in horizontal plane. The fixture weight should be less than 2Kg and dimensions should be less than 60 x 1200x 70 mm. Lifetime should be at least 50,000 burning hours at L70 at 25 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK07. The luminaire manufacturer shall provide polar diagrams and photometric data in various formats including IES file format in accordance with IES LM 79. BIS approval for the luminaire needs to be submitted for records.
1
-
-
... More
Supply of 50ft factory made armoured female connector cable for connecting the above luminarie with DMX and power supply
1
-
-
... More
Supply of 5ft factory made armoured female and male connector cable for connecting the above luminarie.
1
-
-
... More
ILLUMINATION FOR ASHOKA PILLAR
-
-
-
... More
Supply, Installation, testing and Commissioning of IP 66 architectural mounted LED Spot Light fixture operating on 230 V AC Mains with Operating Voltage range between 100 V AC to 240 V AC. Power Supply should be integral part of the luminaire and should have 80% Efficiency with Power Factor of 0.9. Max power consumption of 35W using RGBmW LEDs. Luminaire shall be with tunable white of 2000k to 1000k also 5 million colours by mixture of RGB LEDS. Luminarie with Die cast aluminium housing & clear glass cover.
-
-
-
... More
The lumen output of the product with 20° - 25° lens should be 1200lm and luminaire should have CE/CB & UL Certification. The luminaire shall be with system efficacy of 40 lm / W (All Channels Full On). The luminarie operating temperature shall be 0 to 50 °C. The luminaire shall be able to deliver greater than 160 lux / 15 fc at 24 ft from luminaire with a beam width of 18 ft in vertical plane. The fixture weight should be less than 6Kg and dimensions should be less than 300 x 220x 190 mm.
-
-
-
... More
The light fixture connections should be via unified mains voltage & control data cable e.g. Line, Neutral, Earth & Data and should be programmable using 8 bit or 16 bit control with DMX512 protocol as per the lighting sequence required for desired theme creation. The luminaire should have CE/CB & UL certification. The luminaire manufacturer shall provide polar diagrams and photometric data in various formats including IES file format in accordance with IES LM 79. BIS approval for the luminaire needs to be submitted for records.
3
-
-
... More
Supply, Installation, Testing and Commissioning of Data formatting device specifically designed for luminaires operates on the same technology[single-cable line voltage opertion] suitable for Power I / p - 100-240V AC, 50-60 Hz,Max connected load- 16A,Internal loss not to exceed -20W,Heat dissipiation should be in the order of 10W max Ambient temperature - 0°C- 50°C ,Data i/p interface - DMX / Ethernet ,Protection rating - IP 66 (Suitable for humid / raining locations),Input Voltage 100 – 277 VAC, auto-ranging, 50 / 60 Hz, Maximum Dimensions (Height x Width x Depth)-90 x 300 x 150 mm,Weight -3.0KG,Construction -Cast aluminum enclosure with slots for surface mounting.Soft Copy of Catalogues along with Link of the official web page ,Test Certificates -UL, Third Party IEC test certificates is mandatory.
1
-
-
... More
Supply, Installation, testing and Commissioning of Slim and flexible IP 66 LED strip Light fixture operating on 24V DC Mains with 2.5W per feet. Luminaire CCT shall be 3000k . Luminarie with extruded silicon housing & frosted silicon lens. The lumen output of the product with 120° should be 250lm per feet. The luminaire shall be with system efficacy of 95 lm / W (All Channels Full On). The luminarie operating temperature shall be 0 to 50 °C. The luminaire shall be able to deliver greater than 35 lux / 3.5 fc at 5 ft from luminaire with a beam width of 105 ft in both plane.
-
-
-
... More
The fixture weight should be less than 1Kg and dimensions should be less than 13 x 5000x 10 mm. The luminarie shall be provided with neccessary leader cable and IP rated driver. The luminaire manufacturer shall provide polar diagrams and photometric data in various formats including IES file format in accordance with IES LM 79. BIS approval for the luminaire needs to be submitted for records.
1
-
-
... More
ILLUMINATION FOR STATUE WITH FLAG
-
-
-
... More
Supply, Installation, testing and Commissioning of IP 66 architectural mounted LED Spot Light fixture operating on 230 V AC Mains with Operating Voltage range between 100 V AC to 240 V AC. Power Supply should be integral part of the luminaire and should have 80% Efficiency with Power Factor of 0.9. Max power consumption of 35W using RGBmW LEDs. Luminaire shall be with tunable white of 2000k to 1000k also 5 million colours by mixture of RGB LEDS. Luminarie with Die cast aluminium housing & clear glass cover.
-
-
-
... More
The lumen output of the product with 10° - 15° lens should be 1300lm and luminaire should have CE/CB & UL Certification. The luminaire shall be with system efficacy of 40 lm / W (All Channels Full On). The luminarie operating temperature shall be 0 to 50 °C. The luminaire shall be able to deliver greater than 450 lux / 41 fc at 24 ft from luminaire with a beam width of 4 ft in both plane. The fixture weight should be less than 6Kg and dimensions should be less than 300 x 220x 190 mm.
-
-
-
... More
The light fixture connections should be via unified mains voltage & control data cable e.g. Line, Neutral, Earth & Data and should be programmable using 8 bit or 16 bit control with DMX512 protocol as per the lighting sequence required for desired theme creation. The luminaire should have CE/CB & UL certification. The luminaire manufacturer shall provide polar diagrams and photometric data in various formats including IES file format in accordance with IES LM 79. BIS approval for the luminaire needs to be submitted for records.
1
-
-
... More
Supply, Installation, Testing and Commissioning of Data formatting device specifically designed for luminaires operates on the same technology[single-cable line voltage opertion] suitable for Power I / p - 100-240V AC, 50-60 Hz,Max connected load- 16A,Internal loss not to exceed -20W,Heat dissipiation should be in the order of 10W max Ambient temperature - 0°C- 50°C ,Data i/p interface - DMX / Ethernet ,Protection rating - IP 66 (Suitable for humid / raining locations),Input Voltage 100 – 277 VAC, auto-ranging, 50 / 60 Hz, Maximum Dimensions (Height x Width x Depth)-90 x 300 x 150 mm,Weight -3.0KG,Construction -Cast aluminum enclosure with slots for surface mounting.Soft Copy of Catalogues along with Link of the official web page ,Test Certificates -UL, Third Party IEC test certificates is mandatory.
1
-
-
... More
Supply, Installation, Testing and Commissioning of Four Feet Length RGB LED linear grazing luminaire low power with housing material of extruded aluminium, dark grey anodized finish, system wattage not exceeding 30W and system lumen output of not less than 600 lumens. Fixture shall be available with architectural optics with choice of beam angles of Elliptical 25 - 30° x 80 - 85° or wide 120°beam angles. Fixture shall operate in a temperature range of 0°C to 40°C. Fixture shall have auto-ranging input voltage for 100 – 240 VAC.
-
-
-
... More
The luminaire shall be able to deliver greater than 10 lux / 1 fc at 16 ft from luminaire with a beam width of 28 ft in vertical plane and 7ft in horizontal plane. The fixture weight should be less than 2Kg and dimensions should be less than 60 x 1200x 70 mm. Lifetime should be at least 50,000 burning hours at L70 at 25 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK07. The luminaire manufacturer shall provide polar diagrams and photometric data in various formats including IES file format in accordance with IES LM 79. BIS approval for the luminaire needs to be submitted for records.
1
-
-
... More
Supply, Installation, Testing and Commissioning of Two Feet Length RGB LED linear grazing luminaire low power with housing material of extruded aluminium, dark grey anodized finish, system wattage not exceeding 30W and system lumen output of not less than 250 lumens. Fixture shall be available with architectural optics with choice of beam angles of Elliptical 25 - 30° x 80 - 85° or wide 120°beam angles. Fixture shall operate in a temperature range of 0°C to 40°C. Fixture shall have auto-ranging input voltage for 100 – 240 VAC.
-
-
-
... More
The luminaire shall be able to deliver greater than 10 lux / 1 fc at 16 ft from luminaire with a beam width of 28 ft in vertical plane and 7ft in horizontal plane. The fixture weight should be less than 1Kg and dimensions should be less than 60 x 620x 70 mm. Lifetime should be at least 50,000 burning hours at L70 at 25 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK07. The luminaire manufacturer shall provide polar diagrams and photometric data in various formats including IES file format in accordance with IES LM 79. BIS approval for the luminaire needs to be submitted for records.
1
-
-
... More
Supply of 50ft factory made armoured female connector cable for connecting the above luminarie with DMX and power supply
2
-
-
... More
Supply of 5ft factory made armoured female and male connector cable for connecting the above luminarie.
10
-
-
... More
ILLUMINATION FOR NEHRU STATUE
-
-
-
... More
Supply, Installation, testing and Commissioning of IP 66 architectural mounted LED Spot Light fixture operating on 230 V AC Mains with Operating Voltage range between 100 V AC to 240 V AC. Power Supply should be integral part of the luminaire and should have 80% Efficiency with Power Factor of 0.9. Max power consumption of 35W using RGBmW LEDs. Luminaire shall be with tunable white of 2000k to 1000k also 5 million colours by mixture of RGB LEDS. Luminarie with Die cast aluminium housing & clear glass cover.
-
-
-
... More
The lumen output of the product with 20° - 25° lens should be 1200lm and luminaire should have CE/CB & UL Certification. The luminaire shall be with system efficacy of 40 lm / W (All Channels Full On). The luminarie operating temperature shall be 0 to 50 °C. The luminaire shall be able to deliver greater than 160 lux / 15 fc at 24 ft from luminaire with a beam width of 18 ft in vertical plane. The fixture weight should be less than 6Kg and dimensions should be less than 300 x 220x 190 mm.
-
-
-
... More
The light fixture connections should be via unified mains voltage & control data cable e.g. Line, Neutral, Earth & Data and should be programmable using 8 bit or 16 bit control with DMX512 protocol as per the lighting sequence required for desired theme creation. The luminaire should have CE/CB & UL certification. The luminaire manufacturer shall provide polar diagrams and photometric data in various formats including IES file format in accordance with IES LM 79. BIS approval for the luminaire needs to be submitted for records.
1
-
-
... More
Supply, Installation, Testing and Commissioning of Data formatting device specifically designed for luminaires operates on the same technology[single-cable line voltage opertion] suitable for Power I / p - 100-240V AC, 50-60 Hz,Max connected load- 16A,Internal loss not to exceed -20W,Heat dissipiation should be in the order of 10W max Ambient temperature - 0°C- 50°C ,Data i/p interface - DMX / Ethernet ,Protection rating - IP 66 (Suitable for humid / raining locations),
-
-
-
... More
Input Voltage 100 – 277 VAC, auto-ranging, 50 / 60 Hz, Maximum Dimensions (Height x Width x Depth)-90 x 300 x 150 mm,Weight -3.0KG,Construction -Cast aluminum enclosure with slots for surface mounting.Soft Copy of Catalogues along with Link of the official web page ,Test Certificates -UL, Third Party IEC test certificates is mandatory.
1
-
-
... More
Supply, Installation, testing and Commissioning of Slim and flexible IP 66 LED strip Light fixture operating on 24V DC Mains with 2.5W per feet. Luminaire CCT shall be 3000k . Luminarie with extruded silicon housing & frosted silicon lens. The lumen output of the product with 120° should be 250lm per feet. The luminaire shall be with system efficacy of 95 lm / W (All Channels Full On). The luminarie operating temperature shall be 0 to 50 °C.
-
-
-
... More
The luminaire shall be able to deliver greater than 35 lux / 3.5 fc at 5 ft from luminaire with a beam width of 105 ft in both plane. The fixture weight should be less than 1Kg and dimensions should be less than 13 x 5000x 10 mm.
-
-
-
... More
The luminarie shall be provided with neccessary leader cable and IP rated driver. The luminaire manufacturer shall provide polar diagrams and photometric data in various formats including IES file format in accordance with IES LM 79. BIS approval for the luminaire needs to be submitted for records.
1
-
-
... More
ILLUMINATION FOR SILVER STATUE
-
-
-
... More
Supply, Installation, testing and Commissioning of IP 66 architectural mounted LED Spot Light fixture operating on 230 V AC Mains with Operating Voltage range between 100 V AC to 240 V AC. Power Supply should be integral part of the luminaire and should have 80% Efficiency with Power Factor of 0.9. Max power consumption of 35W using RGBmW LEDs. Luminaire shall be with tunable white of 2000k to 1000k also 5 million colours by mixture of RGB LEDS.
-
-
-
... More
Luminarie with Die cast aluminium housing & clear glass cover. The lumen output of the product with 20° - 25° lens should be 1200lm and luminaire should have CE/CB & UL Certification. The luminaire shall be with system efficacy of 40 lm / W (All Channels Full On). The luminarie operating temperature shall be 0 to 50 °C. The luminaire shall be able to deliver greater than 160 lux / 15 fc at 24 ft from luminaire with a beam width of 18 ft in vertical plane. The fixture weight should be less than 6Kg and dimensions should be less than 300 x 220x 190 mm.
-
-
-
... More
The light fixture connections should be via unified mains voltage & control data cable e.g. Line, Neutral, Earth & Data and should be programmable using 8 bit or 16 bit control with DMX512 protocol as per the lighting sequence required for desired theme creation. The luminaire should have CE/CB & UL certification. The luminaire manufacturer shall provide polar diagrams and photometric data in various formats including IES file format in accordance with IES LM 79. BIS approval for the luminaire needs to be submitted for records.
1
-
-
... More
Supply, Installation, Testing and Commissioning of Data formatting device specifically designed for luminaires operates on the same technology[single-cable line voltage opertion] suitable for Power I / p - 100-240V AC, 50-60 Hz,Max connected load- 16A,Internal loss not to exceed -20W,Heat dissipiation should be in the order of 10W max Ambient temperature - 0°C- 50°C ,Data i/p interface - DMX / Ethernet ,Protection rating - IP 66 (Suitable for humid / raining locations),Input Voltage 100 – 277 VAC, auto-ranging, 50 / 60 Hz, Maximum Dimensions (Height x Width x Depth)-90 x 300 x 150 mm,Weight -3.0KG,Construction -Cast aluminum enclosure with slots for surface mounting.Soft Copy of Catalogues along with Link of the official web page ,Test Certificates -UL, Third Party IEC test certificates is mandatory.
1
-
-
... More
CONTROLLER & ACCESSORIES
-
-
-
... More
Supply, Installation, Testing and Commissioning of DMX booster/ splitter that takes the incoming DMX/RDM signal and splits the signal into six separate output channels allowing for expanding the number of devices controlled from 32 to 6 X 32. The output terminals are electronically isolated from the input & RDM-through port and share a common ground reference. All six output ports have an independent output driver to boost the DMX/RDM signal. IP20,Operating Temperature -10° to 35°C .Max. Dimensions (Height x Width x Depth) 40 x 120 x 90 mm. Max. Weight 0.250 kg.
6
-
-
... More
Supply, Installation, Testing and Commissioning of Multi-Protocol Converter that performs a range of lighting protocol conversions, including KiNET, the Ethernet lighting protocol to DMX512, DMX512 to KiNET, and RS232 to KiNET. KiNET to DMX512 conversion to use DMX-based power / data supplies with any KiNET-based device, IP40,Operating Temperature -10° to 40°C .Max. Dimensions (Height x Width x Depth) 40 x 120 x 90 mm. Max. Weight 0.20 kg
1
-
-
... More
Supply, Installation, Testing and Commissioning of Content Program Controller specifically designed for author, configure, and control intricate LED light shows in multiple zones,Input Power- 100 to 240 VAC, auto-ranging, 50/60 Hz,Power Consumption 200 W maximum,Minimum supported LED Nodes 10,000,Network Data- Ethernet protocol,Max Dimensions (Height x Width x Depth) 250 x 320 x 80 mm ,Max.Weight 5.0kg,Housing- Aluminium enclosure,Connector/Cable (2) RJ45 ports, shielded data cable. Soft Copy of Catalogues along with Link of the official web page ,Test Certificates -UL, Third Party IEC test certificates is mandatory. Recommended brands color kinetics or equivalent.
1
-
-
... More
Ethernet keypad module for the above DMX controller with the button panel for selecting multiple scenes
1
-
-
... More
Supply of Indoor rated button panel with RS485 DyNet serial port for selecting scenes. It should have soft touch and it is classified as a Class 2. It shall be a safety Extra-Low Voltage (SELV) device. It should available in white, silver, magnesium and brushed aluminium button finishes.
1
-
-
... More
Supply of Ethernet switch for connecting the content program controller, keypad and the other lighting systems.
1
-
-
... More
ELECTRICAL ITEMS
-
-
-
... More
Supplying & laying/ Fixing the following sizes of PVC insulated, PVC sheathed copper conductor XLPE cable of 1.1 KV grade of following sizes in the following manners complete i/c connection, testing with all accessories etc. as required .
-
-
-
... More
3 x 2.5Sq.mm
172
-
-
... More
4 x 2.5Sq.mm
189
-
-
... More
2 x 1Sq.mm
78.97
-
-
... More
Supplying and laying/ Fixing of Armoured UTP 4 pair CAT 6 LAN cable on surface complete i/c connection, testing etc. as required
70
-
-
... More
Supply of Single phase High Grade Voltage Stabiliser for the installation with features:
Low & High Voltage Cut-off Protection Range from 170V-270V Easy Mounting Cabinet Design-Elegant and easy to install with integrated circuit technology for protection on Thermal Overload Protection of makes Guardian/APC/Liebert or equivalent.( 10kVA )
3
-
-
... More
Supply of IP66 rated Cable Junction Boxes for providing connectivity between luminaries and the supply lin
25
-
-
... More
CEILING FAN
-
-
-
... More
Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make)
-
-
-
... More
Energy efficient 5-star 1200 mm sweep. ORIENT PSPO / Usha / CROMPTON / Havells/ ATC or equivalent make
4
-
-
... More
EXHAUST FAN
-
-
-
... More
Supplying including fitting fixing of following A.C. Wall fan in the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.
-
-
-
... More
(CROMPTON /ORIENT/Havells/USHA or equivalent make)
-
-
-
... More
V2 with metal blade, 450 mm sweep
2
-
-
... More
CONDUIT
-
-
-
... More
Supply and fixing of 19 mm dia 1.50mm to 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) on surface system including painting etc as required
500
-
-
... More
Supply and fixing of 25 mm dia 1.50mm to 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) on surface system including painting etc as required:
500
-
-
... More
Supply and fixing 32 mm mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) on surface system including painting etc as required:
300
-
-
... More
CABLE
-
-
-
... More
Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable
-
-
-
... More
U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) .
-
-
-
... More
2 Core A2XWaY A2XFaY
-
-
-
... More
4.00 Sq.mm 2 Core armoured U.G. cable
3000
-
-
... More
3 & 1/2 Core A2XFY
-
-
-
... More
25.00 Sq. mm.3 & 1/2 Core armoured U.G. cable
2000
-
-
... More
50.00 Sq. mm.3 & 1/2 Core armoured U.G. cable
500
-
-
... More
300.00 Sq. mm.3 & 1/2 Core armoured U.G. cable
500
-
-
... More
CCTV
-
-
-
... More
Supplying installation testing and commissioning of - 16 Chanel CIF Real Time DVR,upto 400 (PAL) fps recording rate , Max 4 internal HDD (HDD x 4) , 4 Audio Inputs, 1 Channel Audio Output , DVR-RW (SAMSUNG or equivalent HONEYWELL/PANASONIC make)
2
-
-
... More
PUMP
-
-
-
... More
Supplying including installation, connection as approved by the Deptt., testing and commissioning of CENTRIFUGAL MONOBLOCK PUMP SET complete as directed and specified by the deptt.
-
-
-
... More
3 HP three Phase Centrifugal monoblock pump set (Crompton Greaves/ Aquatic/ CRI/ V-Guard make) 2900 rpm A class insulation with DOL Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) .
6
-
-
... More
EARTHING
-
-
-
... More
Supply, installation & testing of G.I. earth station with perforated 50 mm dia and 3.00 Metre long heady duty G.I. pipe with necessary 50 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 65 mmx50 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .
7
-
-
... More
Extra for using salt (5 K and Charcoal (96 K in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt .
7
-
-
... More
Supplying & laying of following size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.
500
-
-
... More
D.G.SET
-
-
-
... More
Supplying including installation, testing and commissioning of Air/Water Cooled Diesel Generator set coupled to suitable alternator of 220/415 V, AC, 1/3-Phase 0.8 p.f.(la mounted on a 1) M.S. Fabricated base frame.,2) M.S. fuel tank of required capacity.,3) Residual Silencer.,4) Standard Control Panel.5) Suitable batteries with lead.,5) First fill of lube oil.,6) Acoustic Enclosure complete with all accessories as specified and directed by the department conforming to IS comprising the Technical Specification.. as per manufacturer. (RANGE FROM 5 KVA TO 625 KVA) Kirloskar green/bliss, Leyland, Volvo Penta, Perkinson, Mahindra, Greaves, Escort engine and Kirloskar, Stamford, Leroy somer alternator.
-
-
-
... More
KVA- PHASE- Approx size- Approx Wt - COOLING
-
-
-
... More
320 3 5700x2000x2555 5750 Kg W/C
1
-
-
... More
DEPOSIT WORK
-
-
-
... More
DEPOSIT WORK INCLUDING LOAD SANGTION, ENERGY METER, METER CABINET, MCCB, ALL REQUIRED AUXILLIARIES, HAS BEEN NECESSARY FOR CHARGING THE TRANSFORMER
1
-
-
... More
FIRE FIGHTING WORKS
-
-
-
... More
Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required.
(Make:TATA/JINDAL/NEZONE)
-
-
-
... More
100 mm dia
85
-
-
... More
Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd.
-
-
-
... More
(Make:Koley/Kalpana/Audco)
-
-
-
... More
100 mm dia
13
-
-
... More
Supplying & Fixing,cast iron body Butterfly Valves with matching flanges, rubber insertion, nuts, bolts and washer etc (IS:13095) of following size complete as reqd.
-
-
-
... More
(Make:Koley/Kalpana/Audco)
-
-
-
... More
100 mm dia
13
-
-
... More
Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884.
13
-
-
... More
Providing & fixing of weather proof hose cabinets fabricated from 16 S.W.G. M.S. Sheet with centre opening full front glass door and locking arrangement, suitable to accommodate one landing valve (Yard Hydrant ), 2nos.15M long hoses and 1 no. Branch pipe with nozzle . The cabinet shall be painted with one coat of primer and 2 or more coats of synthetic enamel paint of approved make & shade and shall be suitably mounted on a raised masonry platform complete as reqd.(Make:self Fabricated)
-
-
-
... More
900X600X450
18
-
-
... More
Providing controlled percolating (C.P.) hose ISI Marked (IS:8423) 63 mm dia X 15 M long complete with instantaneous type Gun Metal 63 mm dia ISI Marked male & female couplings (IS:903) bound & riveted to hose pipes with copper rivets and copper wire complete as required.
-
-
-
... More
(MAKE: NIRMAL RUBBER/NEWAGE)
18
-
-
... More
Providing & Fixing of Gun Metal 63 mm dia Short Branch Pipe with 20 mm dia nozzle, ISI marked (IS:903) complete as required.
-
-
-
... More
(Make: ESSEL/WINCO/NEWAGE).
18
-
-
... More
Providing & Fixing of Gun Metal fire Brigade Connection (inlet collection head) consisting of 63mm instantaneous type male coupling with built in check valves and 150 mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904-1983 complete as reqd.
-
-
-
... More
MAKE: ESSEL/WINCO/NEWAGE
-
-
-
... More
02 way
18
-
-
... More
Providing ,Fixing ,Testing & Commissioning of air Release Valve
-
-
-
... More
25 mm dia
13
-
-
... More
SPRINKLER SYSTEM
-
-
-
... More
Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required.
-
-
-
... More
80 mm dia
82.1
-
-
... More
65 mm dia
67.85
-
-
... More
25 mm dia
55.1
-
-
... More
Supplying, Installation,Testing & Commissioning of 15 mm dia quartzoid Bulb Type G.M. Sprinkler Head sutable to operate at 68* C complete as reqd. (UL/FM/LPC listed/Approved)
(Make : HD Fire / TYCO)
32
-
-
... More
Supplying & Fixing,cast iron body Butterfly Valves with matching flanges, rubber insertion, nuts, bolts and washer etc (IS:13095) of following size complete as reqd.
-
-
-
... More
(MAKE:KOLEY/KALPANA/AUDCO)
-
-
-
... More
80 mm dia
12
-
-
... More
FIRE EXTINGUISHER
-
-
-
... More
Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (5 KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD
20
-
-
... More
FIRE DETECTION AND ALARM SYSTEM
-
-
-
... More
Supply,installation,testing & commissioning of 150 mm dia installation control valve assembly comprising of vertical wet alarm valve, hydraulic alarm motor & gong, 15 mm dia Test Valve, 50 mm dia , Drain Valve and all necessary trimming connections including 02 nos. pressure gauge as per manufacturers catalogue complete as reqd.(UL/FM/LPC Listed/Approved)
(Make : HD FIRE )
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements