Gauhati University Tender
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Gauhati University Tender
Coronavirus COVID 19
Eprocure
Opening Date30 Aug 2018
Closing Date3 Oct 2018
Tender Amount₹ 1,57,37,838
Costs
EMD
₹ 3,61,789Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Residential Quarter At Gauhati University
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_GU_8406_1Bid Award Id
ViewTender No
T/18-19/181 dtd 30.08.2018Tender Authority
Gauhati University ViewPurchaser Address
-Website
http://https://www.gauhati.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. Of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete.
25
-
-
... More
REINFORCED CEMENT CONCRETE WORK Providing and laying reinforced cement concrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (from work and reinforcement will be measured and paid separately). (A) In sub-structure up to plinth level- Using mixture machine Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick unto plinth level. b) M20 or Prop. 1:1.5:3
109
-
-
... More
(B) Super-structure from plinth level upto 1st floor level. ii) Columns, pillars, posts struts, suspended floor,roof,landing,shelf and support, balcony , lintel, sill band, beam, girder, bressumer, cantilever, staircase including preparing of top surfaces and furnishing and nosing. b) M20 or Prop. 1:1.5:3
221.5
-
-
... More
Extra over item nos.2.2.1 (I) B above for each subsequent floor or part thereof above the 1st floor level.
149
-
-
... More
TIMBER SHUTTERING (FORMWORK) Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reonforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap raft and mass concrete works etc. b) Using 25mm thick plank.
55
-
-
... More
Sides of tie beams, grade beams etc. at or below ground level. b) Using 25mm thick plank.
270
-
-
... More
PLYBOARD SHUTTERING (FORMWORK) Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shuttering, stutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/ L etc. having plane vertical face.
619
-
-
... More
Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. a) For depth not exceeding 1.0M
627
-
-
... More
Flat surfaces such as soffits of suspended floors, roofs, landings, cantilever slabs, chajjas, balconies and the like. a) Floors etc. upto 200mm in thickness.
763
-
-
... More
Staircase with sloping or stepped soffits including risers and stringers but excluding Landing.
52
-
-
... More
Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3 (b).
1300
-
-
... More
BRICK WORKS Providing brick soling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the sub grade as directed including all labors and materials and if necessary dewatering complete a) Brick on flat soling
386
-
-
... More
Filling sunken floor with broken jhama brick bats and sand including compacting and supplying of materials complete as specified and directed for all levels .
25
-
-
... More
i) Extra cost for lifting of brick bats and sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified.
13
-
-
... More
Brick work in cement mortar with 1st class brick including racking out joints and dewatering if necessary, and curing complete as directed. (I) In sub-structure up to plinth level. d) In proportion 1:4
17
-
-
... More
(II) In superstructureabove plinth level up to 1st Floor level. b) In proportion 1:4 (1cement : 4sand)
14
-
-
... More
Extra over item no. 4.1.4(ii) above for brick work in each subsequent floor or part thereof above 1st floor level.
14
-
-
... More
112mm thick 1st class brick wall in cement mortar including racking out joint and curing complete as directed in super structure above plinth up to1st floor level (protruding MS rod / Tor Steel of column to be embeded in cement mortar and will be measued and paid separately) . (A) 112 mm thick brick wall a) In cement mortar in proportion 1:4(1cement : 4 sand)
1262
-
-
... More
Extra for brick walling for each subsequent floor or part thereof above the 1st floor level as mentioned above. a) 112mm thick brick / R.B. wall
886
-
-
... More
CERAMIC TILES (A) ON FLOOR Providing Ceramic Floor Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). a) Normal range (Somany/ Orient / Nitco / Asian Make) i) of size 300mmx300mm and above (For Toilets)
48
-
-
... More
(B) ON WALLS Providing polished ceramic wall tiles of approved quality size, shape and thickness not less than 8mm on wall surfaces, skirting ,over cement mortar bed 10mm thick in prop 1:3 (1cement:3 coarse sand) including cutting where necessary finished with flush pointing with fix A-Tile (Choksey/ Sika/ pedelite/ Rouf)/ White cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed.(Cement plastering will be measured and paid separetly).(coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department.) (Walls mean both interior and exterior walls) a) Normal Range (Somany / Orient / Nitco / Asian Make) (ii) of Size : 200mm X 300mm and above)
252
-
-
... More
VITRIFIED TILES (A) ON FLOOR Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirting, risers and treads of steps over 15mm thick base of cement mortar in prop. 1:3 (1cement:3coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement slurry mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as directed by the Department). a) Normal range (Somany/ Orient / Nitco / Varmora / Jhonson make) (ii) of size 600mm X 600mm and above
642
-
-
... More
CONCRETE TILES (A) FLOOR TILES Providing polished SUNROCK-Hi CTS/ MULTIWYN tiles of approved quality, size, shape and thickness not less than 18mm on floors and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (a) SUN ROCK HIGH CTS Tiles (for Terrace area)(i) Well, Chocolate, Diamond square, Ramp, Beach Sand (300 x 300) mm
59
-
-
... More
MARBLE FLOORING 18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads and risers of steps, skirting, laid over 20 mm thick base of cement plaster1:6 (1 cement : 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slab of specified quality and shade at all levels.(i) Dungri slab
77
-
-
... More
GRANITE FLOORING Providing polished granite slab of approved quality size, shape and thickness not less than 20mm on floors, skirtings, treads and risers of steps over cement morter bed 15 mm thick in prop 1:3 (1 cement : 3 coarse sand) including cutting where necessary finished with flush pointing with Fix A - Tile (Choksey/ Sika/ Pedelite/ Rouf) / White cement slurry mixed with approved pigment to match shade of granite slab complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as as approved and directed by the department).i) Normal Quality i) Fixed with Fia-A-Tile (Choksey/Sika/Pidilite/Rouf)
28
-
-
... More
CEMENT PLASTERING 10mm thick Cement plaster in single coat on fair side of brick / concrete walls for interior plastering up to 1st floor level including arises , internal rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed.b) In cement mortar 1:4
3476
-
-
... More
15mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises , internal rounded angles, not exceeding 80mm in girth and finished even and smooth including curing complete as directed.(A) On Rough Side b) In cement mortar 1:4
1338
-
-
... More
Extra over item no.6.2.1 to 6.2.3 for plastering on ceiling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.
330
-
-
... More
Extra over item no. 6.2.1 to 6.2.3 for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed.a) on Single coat plaster
382
-
-
... More
Extra over item no. 6.2.1 to 6.2.3 for exterior plastering over wall for every additional floor or part thereof beyond 1st floor level including curing complete as directed.a) on Single coat plaster
979
-
-
... More
15mm thick plain cement mortar bands in cement morter 1 : 4 up to 300mm in width including curing complete as directed. (A) Up to 300 mm width c) Raised band
46
-
-
... More
Pointing on brick work with cement mortar 1 : 4 including curing complete as directed ( Measurement shall be taken on surface area of the wall.)(B) Cement mortar prop. 1:4 b) Ruled pointing
343
-
-
... More
Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary).(ii)12.5mm thick
150
-
-
... More
ROOFING & ROOF TREATMENT Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) (Dyna roof / Sathyam/ Durakolor/ Century Wells) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) Dynaroof / Wonder Roof / JSW Steel / Spectrum or equivalent as directed by the Department.(iii) 0.50 mm thick
260
-
-
... More
Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) (Dyna roof /Sathyam/ Durakolor/Century Wells) at all levels including fitting and fixing self drilling, self tapping screws complete complete. Dynaroof / Wonder Roof / JSW Steel / Spectrum or equivalent as directed by the Department.(iii) 0.50 mm thick
132
-
-
... More
Providing, fitting and fixing full panelled doors/ windows including oxidised M.S butt hinges (100mm x75 mm x3.55mm) with necessary screws (other fittings to be measured and paid separately ) (B) With 1st class local wood (Gamart / Hollock / Bonsum )(ii) 35mm thick
46
-
-
... More
Providing and fixing 25mm thick wooden shutters for cup board including black enamelled M.S butt hinges (75mmx 40mmx1.12mm) 6 nos. with necessary wood screws (fully panelled) (ii) Using Particle / Block bord a) With Teak wood particle board (12mm thick)
77
-
-
... More
f).With block board (one side Teak and other side commercial 19mm/20mm thick).
198
-
-
... More
BLOCK BOARD SHUTTERS Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. b) Non decorative type and block board core. (ii) 35 mm thick .
52
-
-
... More
GRILL WORK Providing fitting and fixing M.S. grill of required pattern for windows / opening with M.S.flats at required spacing in frame all round, square round M.S. bars with round headed bolts and nuts or screws.I. Plain grill c) Fixed to Brickwork/P.C.C./R.C.C.
1755
-
-
... More
WINDOWS & VENTILATORS Providing fitting and fixing anodized aluminum windows and ventilators of standard sections without horizontal glazing bars joints mitered and welded(manufacture to relevant IS specifications) fitted with 6mm X 3.15mm lugs 100mm long embedded in CC blocks 150mm X 100mm X 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangements, spring catch as required complete as specified and directed for all levels, Cement concrete to be measured and paid separately) a) Side hung and Top hung windows and ventilators i) 6 mm clear glass
7
-
-
... More
b) Fixed windows and ventilators i) 6 mm clear glass
9.5
-
-
... More
Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels.(a) 2 Track sliding window i) 6mm clear glass
99.5
-
-
... More
(b) 3 Track sliding window i) 6mm clear glass
20
-
-
... More
CEMENT PAINT & PRIMER a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.
4562
-
-
... More
PLASTER OF PARIS & WALL PUTTY Providing two coats of J.K Wall Putty (White Cement based putty for concrete/mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)
4562
-
-
... More
WALL PAINTING Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)
3404
-
-
... More
PAINTING ON WOOD AND WOOD BASED SURFACES Applying priming coat over new wood and wood ; based surfaces over 100mm in girth / width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foregin matter, sand papering and knotting. a) With ready mixed paint, wood primer (pink)
142.5
-
-
... More
Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture(Asian paint/Berger paint/ICICI paint/ J & N Paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foregin matter sand papering and stopping.i) Surface over 100mm in width or girth a) General purpose (Asian paint / Berger paint / ICI paint/J &N paint/Nerolac).
142.5
-
-
... More
PAINTING ON STEEL AND OTHER METAL SURFACES Applying primary coat over new steel and other metal surface over 100mm in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign mater and scoured with wire brushes, fine steels, wood scrapers and sand paper.a) With ready mixed " red-lead/red-oxide" primer
204
-
-
... More
Painting two coats(edcluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacturer ( Asian paint/Berger paint/ ICI paint/ J & N paint / Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i) Surface over 100mm in wodth or girth a) General purpose (Asian paint / Berger paint / ICI paint/ J & N paint/ Nerolac).
204
-
-
... More
SPECIAL WEATHER PROOF COLOURING Finishing old/ new wall with water proofing weather coat smooth anti-fungal premium textured exterior finish of Sandex Matt brand of Snowcem India Ltd. of required shade after clering and clearing the surfaces etc.including scaffolding complete as directed at all levels (two coats).
1425
-
-
... More
ALUMINIUM FITTINGS Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) l) Hydraulic door closure
18
-
-
... More
Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ).a) Sliding door bolts ii) 250mm X 16mm
44
-
-
... More
b) Tower bolts iii) 250mm X 10mm
48
-
-
... More
c) Door handles i) 75mm (for Cupboard)
108
-
-
... More
c) Door handles iii) 150mm
106
-
-
... More
o) Mortice cylindrical type(Godrej make)-polished Brass
18
-
-
... More
t) Curtain rod i) 20mm x 2mm
33
-
-
... More
v) Door stopper with rubber stopper
18
-
-
... More
REINFORCEMENT Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work / R.B. walling including straightening,cleaning,cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level). a) From Primary Producer : TATA / SAIL / JINDAL STEEL / SHYAM STEEL / RINL ii) Super Ductile (SD) TMT Reinforcement
397
-
-
... More
d) Extra over item 18.1.1 (a,b,c) for each subsequent floor or part thereof above first floor level.
179
-
-
... More
ROOF TRUSS Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. b) Using other ISI marked approved brand tube
65
-
-
... More
DOOR FRAMES Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately). (a) 1.25mm thick sheet (iii) Size 125mm x 60mm (Single rebate)
281.5
-
-
... More
STEEL RAILING Providing and fixing Stainless Steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge. (For payment, only weight of stainless steel member is to be considered. No extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered)
800
-
-
... More
M.S. FAN CLAMP Providing and fixing M.S. Fan clamp Type-I & II of 16mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs or beams during laying including painting the exposed portion of loop, all as per standard design complete.
36
-
-
... More
PLINTH PROTECTION WORKS Providing plinth protection 50 mm thick to cement concrete 1:3:6 with coarse aggregate of 20 mm nominal size including finishing the surface with 10 mm thick cement plaster in proportion 1:3 with a floating coat of neat cement finished.
115
-
-
... More
Providing drain with brick work in cement mortar in prop. 1:5 with half brick thick side walls and 100 mm thick CC(1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shuttering for sides and earth work in excavation of foundation trances and refilling the sides after completion of work etc. as specified . i) 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm.
96
-
-
... More
SURFACE PREPARATION Preparing the RCC surface in roof slab, chajjas, terraces, sunken slabs, septic tank, OH tank, raft slab, walls etc. by thoroughly cleaning with wire brush etc. followed by power washing for making the surface absolutely free from any foreign particles like dust, oil, grease etc. and allowing surface to dry complete as directed at all levels.
402.5
-
-
... More
WATER PROOFING OF CHAJJAS, ROOF SLABS, TERRACES, SUNKEN SLABS, SEPTIC TANK,OH TANK, RAFT SLAB IN BASEMENT, WALLS ETC. Providing and applying over roof/ raft slab, two coats of waterproofing slurry prepared with cement, fine sand in prop 1:1 admixed with modified acrylic polymer like Cemflex of Sika India Ltd /Dr. Sealkit Sealcrete (Asian chemicals) / RHEOMIX 131 OF BASF by brush @ 0.25% of cement-sand mixture (by weight) after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department complete.
325.5
-
-
... More
Providing and applying over sunken slab etc., two coats of waterproofing slurry prepared with neat cement, water and modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./ Dr. Sealkit Masterbond Latex (Asian chemicals) / RHEOMIX 141 by brush after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department complete.
77
-
-
... More
Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.a) With aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or equivalent) and water , i.e. 1% solution.
386
-
-
... More
EUROPEAN TYPE WATER CLOSET Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) A) Parryware make/a) White/(vii) Niagara (Cat No.C0252) (inclusive of seat cover)
12
-
-
... More
PVC FLUSHING CISTERN Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) i) Parryware make/a) White/(i)Economy Single Flush (Cat No.C8090/C8055)
12
-
-
... More
WASH BASIN Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately)Basin (without pedestal)(A) Parryware Make(a) White(iii) Tunga Basin 450 x 300 (Cat. No.C0401)
12
-
-
... More
KITCHEN SINK (STAINLESS STEEL) Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately.(B) Nirali (vi) Grace Deluxe Medium (Bowl Size - 445 x 368 x 190) Glossy
6
-
-
... More
HEALTH FAUCET Providing and fixing health faucet with 1.0 m PVC tube and swivel hook including all fittings complete.
12
-
1141
... More
ANGLE VALVE Fixings C.P. brass angle valve of standard design and of approved make conforming to IS:8931.
25
-
1312
... More
MIRROR Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.
12
-
-
... More
SOAP TRAY,SOAP DISH,LIQUID SOAP DISPENSER AND LIQUID SOAP CONTAINER Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified.(a) Parryware Make(ii) Wall Soap tray (Cat. No.C9951)
12
-
-
... More
ROBE HOOK Providing, fitting and fixing Chrome Plated robe hook complete as directed and specified.(a) Jaquar make/ (i) Continental (Cat.No. ACN-1191N)
12
-
-
... More
TOWEL RAIL,TOWEL RACK & TOWEL RING Providing, fitting and fixing CP towel rail complete as directed and specified.(a) Jaquar make (iv) Queen's (450mm long) (Cat.No.AQN-7711A)
12
-
-
... More
BOTTLE TRAP Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified.(a) Jaquar make (ii) Bottle trap (with internal partition) 32mm size with 300mm long wall connection pipe (Cat.No. ALD-769B)
18
-
-
... More
BIB COCK Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) (for water closet)Jaquare make/ (a)Continental /Clarion(i)Standard
12
-
-
... More
PILLAR COCK Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. Jaguar make (a) Continental
18
-
-
... More
SHOWER Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately).Jaquar makea) Continental (i) Shower arm 190mm long light body with wall flange
12
-
-
... More
PVC PIPES,BENDS,JUNCTIONS,TEES ETC. Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. (For Soil waste & Rain water)a) In exposed surfaces or in trenches. (iv) 75mm dia.
135
-
-
... More
b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.(ii) 110mm dia.
510
-
-
... More
Providing, fixing & testing of uPVC soil,waste and vent pipes (IS : 4985, 8 Kg/cm2 pressure) including injection moulded fittings (heavy duty) (plain or door) e.g. bends, junction, cowls, tees, offsets, access pieces etc. Clamps/Supports jointing with rubber ring/solvent cement joints including cutting chase or holes in walls and floors and making good as required at Site. 40 OD
35
-
248
... More
50 OD
25
-
345
... More
63 OD
30
-
475
... More
Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.(ii) 110mm dia.
40
-
-
... More
Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.(ii) 110mm dia.
30
-
-
... More
Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.
15
-
-
... More
Supplying fiting and fixing PVC single ‘Y’ of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.(ii) 110mm dia.
15
-
-
... More
Supplying fiting and fixing PVC cross ‘T’ plain of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.(i) 110mm x110mm
5
-
-
... More
Providing and fixing UPVC inlet hopper with two or three inlets fittings to receive waste pipes from fixtures waste. The hopper shall be fabricated from 110 mm dia upto 600 mm long upvc pipe complete etc. as per engineer in charge.
20
-
697
... More
Providing and fixing uPVC 'P' trap of self cleansing design (Floor trap) without vent arm with provision for connecting pvc inlet fittings complete including cost of cutting and making good the walls and floors wherever required.
20
-
1399
... More
Providing & fixing 110mm x 63mm UPVC waste with reducing elbow & nipple (floor drain ) including cutting chases, the floor / slab, repairs complete as required and connection to upvc waste pipe.
15
-
1537
... More
Providing and fixing Brass clean out plug comprising of GI socket caulked to pipe and cast brass plug with suitable inlet key for opening male threaded joint with GI class C pipe & socket. Including lead caulked complete as required. 100 mm dia Pipe
20
-
830
... More
Providing and fixing M.S structural work fabricated from standard sections e.g M.S rounds, angles, plates, channels, R.S. joints, GI clamps including cutting to size, drilling, welding, insert plates, dash fasteners of required specification in R.C.C. structural masonry members as directed by Engineer- in- charge including cutting and making good the walls and floors and painting with two coats of enamel paint over primer coat after rubbing and cleaning for pipe supports, clamps, M.S ladder and Manhole tank covers etc. wherever required .
120
-
386
... More
CPVC PIPES Providing and fixing Chlorinated Polyvinyle Chloride(CPVC) Pipes, having thermel stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the clamps at 1.00m spacing.This includes joint of pipe. (A) Exposed or in trenches (Vertical in shaft & Terrace) a) 15 mm nominal outer dia pipe
15
-
-
... More
b) 20 mm nominal outer dia pipe
55
-
-
... More
c) 25 mm nominal outer dia pipe
45
-
-
... More
d) 32 mm nominal outer dia pipe
50
-
-
... More
e) 40 mm nominal outer dia pipe
35
-
-
... More
f) 50 mm nominal outer dia pipe
30
-
-
... More
g) 65 mm nominal outer dia pipe
10
-
2312
... More
h) 80 mm nominal outer dia pipe
10
-
3138
... More
(B) Concealed pipe with cutting chases & making good the wallsa) 15 mm nominal outer dia pipe
130
-
-
... More
b) 20 mm nominal outer dia pipe
50
-
-
... More
c) 25 mm nominal outer dia pipe
15
-
-
... More
GRATING Providing fiting & fixing C.I. Grating to the floors complete as directed and specified. (a) 110mm dia
10
-
-
... More
C.P. Grating (ii) 110mm dia
50
-
-
... More
VALVE Supplying and fitting ball valve as specified and directed. a) 40mm dia
5
-
2911
... More
b) 32mm dia.
10
-
642
... More
c) 25 mm dia. (gun metal)
15
-
738.66
... More
d) 20mm dia. (gun metal/Copper)
20
-
546.27
... More
e) 15mm dia.
2
-
642
... More
providing and fixing motorised butterfly valve rating PN 1.0 with float type sensors suitable for 240 volts with working pressure rating of not less than 5 kg/cm2 with cont0l panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including butterfly valves, necessary cables, conduits, upto junction box etc. complete. (upto 6 mt qty approx.) 32mm dia.
2
-
18543
... More
Providing and fixing CI double acting air valve of approved quality with bolts nuts,rubber insertions etc, complete 15 mm dia.
10
-
767
... More
Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table.
10
-
-
... More
Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed.
1
-
-
... More
Providing and fixing uPVC SN 4/SN 8 conforming to IS : 15328 PVC-U underground Pipes for sewerage and drainage system including all fittings with solvent cement joint interconnection complete as directed by manufacturer's recommendations. 200 mm dia
150
-
2202
... More
250 mm dia
35
-
3414
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), 100 mm foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :Rectangular shape 600x450 mm precast R.C.C. manhole cover with frame - L.D. - 25Inside size 90x80 cm and 45 cm deep including SFRC. cover with frame 455x610 mm internal dimensions. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
12
-
-
... More
Extra depth for Manholes Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
10
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : (a) 150 x 100 mm size P type. With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
12
-
-
... More
Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
7
-
-
... More
Supplying and placing plastic Cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes 1000Lt capacity (a) Sintex make
6
-
-
... More
Construction of brick masonry septic tank on a bed of 1:3:6 PCC with neat cement inside plaster, necessary RCC works etc complete as directed and specified including excavation, backfilling and diaposal of surplus earth. 50 User
2
-
-
... More
Electrical WIRING Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 2 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
1500
-
-
... More
Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
550
-
-
... More
With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
350
-
-
... More
With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
180
-
-
... More
With 2 x 10 sq. mm. + earth continuity with 1x 6 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
200
-
-
... More
Supplying with fitting and fixing of 120 watt electronic modular STEP speed control 2 - module type MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.120 watt electronic modular step speed control 2 - module type
30
-
-
... More
Supplying with fitting fixing of 6 amp one way modular clip in bell push MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.
6
-
-
... More
Supplying including installation of socket outlet 10/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.
24
-
-
... More
Supplying including installation of socket outlet 10 Amps 3 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.
36
-
-
... More
Supplying with fitting fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.
24
-
-
... More
Supplying with fitting fixing of 6/10 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.
250
-
-
... More
Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department.1-2 module type Metal
15
-
-
... More
3 module type Metal
45
-
-
... More
6 module type Metal
15
-
-
... More
9 module type Metal
18
-
-
... More
12 module type Metal
6
-
-
... More
Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department.1 module
9
-
-
... More
2 module
6
-
-
... More
3 module
45
-
-
... More
6 module
15
-
-
... More
9 module
18
-
-
... More
12 module
6
-
-
... More
Supplying with fitting and fixing of 25A Modular Motor Starter 2M , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.
6
-
-
... More
Supplying and fixing of batten holder (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) including connection as approved by the Deptt.)as required Without Lamp
30
-
-
... More
Supplying and fixing of 3 plate Ceiling Rose (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) on the existing block including connection as approved by the Deptt.)complete as required
100
-
-
... More
Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 4 way SPN double door
1
-
-
... More
8 way SPN double door
1
-
-
... More
12 way SPN double door
6
-
-
... More
Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series
(Schneider MG, legrand, Hager make)6 to 32A
76
-
-
... More
Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series
(ABB, Schneider MG, legrand, Hager make)40A
4
-
-
... More
63A
13
-
-
... More
LT CABLE Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . Core - 3.5 A2XFY 50.00 Sq. mm.3 & 1/2 Core armoured U.G. cable
100
-
-
... More
SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) DOUBLE compression BRASS GLANDS WITH NICKEL - PLATED WEATHERPROOF (CBW) Size: 23.5 - 26, 1- 1/4 "
2
-
-
... More
Supplying including installation, commissioning of vermin and dust proof totally enclosed cubical indoor type floor/wall mounting compartmentalize panel board of size 1.35M X 1.50MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom complete painting with 2 coats of Red Oxide metal primer and 2 coats of enamel paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly Wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 8nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items: 1. 20mm X 3mm4 strip copper Bus-Bar 1.4 M length each 2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no 3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no 4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue - 3 no 5. Voltmeter & Ammeter Selector Switch - 2 no 6. 2 A Slide fuse unit - 3nos (Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately)
1
-
-
... More
Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator]. Standard model 1200 mm Sweep Usha make)/ Standard model 1050 / 1200 mm Sweep Havells make)/ High speed 1200 mm sweep (ORIENT PSPO make)
30
-
-
... More
Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. Domestic Trans Air 300 mm sweep (Crompton make)
20
-
-
... More
LUMINARIES Supply, fitting fixing of L.E.D Tube Light: Bajaj BCLSB 18 WH Product Code : 112409 or Equivalent (Philips/Havells/ Syska) complete as approved & directed by the department
70
-
704
... More
EARTHING Supply, installation & testing of G.I. Plate earth station with 600 mmx600 mmx6 mm heavy duty G.I. earth plate with necessary 40 mm dia. G.I. watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm hinged cover C.I. cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .
2
-
-
... More
Extra for using salt (5 K and Charcoal (96 K in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt .
2
-
-
... More
Supplying & laying of 25 X 5 mm size G.I strips drawn on surface from earth electrode to electrical switch gears, machineries etc complete with supply of G.I nuts & bolts ,screws etc including riveting , soldering & making necessary connection as approved, specified and directed by the deptt.
125
-
-
... More
Supplying & laying of 8 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.
50
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements