Gauhati University Tender
... More
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Gauhati University Tender
Civil And Construction
Building Construction
Eprocure
Opening Date28 Feb 2025
Closing Date24 Mar 2025
Tender Amount₹ 4,48,09,385
Technical
Technical
Financial
Bid Capacity
... View More
Average Annual Financial Turnover ≥ 0.3 * Estimated Cost
Assessed available Bid Capacity = (A*N*2-B) Where:
‘A’ = Maximum turnover in construction works in any one year during last three years.
‘B’ = Value of existing commitment and ongoing works to be completed during proposed period of completion of work.
‘N’ = Number of years prescribed for completion of the work contract.
Access to financial resources ≥ 0.1 * Contract Value
Minimum cash investment = 0.25 * Contract Value
Technical Capacity
... View More
The required prior work experience for the bidder includes experience in works of a similar nature and size for each of the last five years, specifically in construction of Similar Residential or Institutional RCC Building. The bidder should have completed the following works during the last 7 years:
- One work of value not less than Rs. 3,58,47,500.00
- Two works of value not less than Rs. 2,24,04,600.00 each
- Three works of value not less than Rs. 1,79,23,700.00 each Additionally, the bidder should possess a valid electrical license and have experience in executing similar type of electrical works, with a minimum value of Rs. 22,48,000/-. The bidder should also have experience in anti-termite and firefighting works. The bidder's annual turnover should be at least 30% of the estimated cost during the last three years. Financial turn over and values of completed works of previous years shall be given weight age of 7% per year and part thereof to bring them to the present price level. The percentage of similar works completed is not explicitly mentioned, but the bidder is required to provide a list of similar works executed, including the work value, client details, and description of the work. The bidder must have achieved Average Annual Financial Turnover of 30% of the estimated cost during the last three years and must be a profit-making one for the last five years.
Costs
EMD
₹ 8,96,188Document Cost
₹ 9,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_GU_43177_1Tender No
T/24-25/250 Dated 25.02.2025Tender Authority
Gauhati University ViewPurchaser Address
-Website
http://https://www.gauhati.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Routine test (Test Load 1.5 times the Safe capacity)
1
-
-
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
22.3
-
-
... More
EARTH WORK
EARTHWORK IN EXCAVATION
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m and lift upto 1.5 m.
All kinds of soil.
186.49
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
50.2
-
-
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
379.52
-
-
... More
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.
All kinds of soil
1036
-
-
... More
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.
Beyond 60 cm girth upto and including 120 cm girth
5
-
-
... More
ANTI TERMITE TREATMENT
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
416.67
-
-
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
93.75
-
-
... More
BRICK MASONRY WORKS
Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
34.65
-
-
... More
CONCRETE WORK
CEMENT CONCRETE (CAST IN SITU)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:3:6 (1 Cement : 3 coarse sand (zone-III) deliverd from natural sources: 6 graded stone aggregate 20 mm nominal size deliverd from natural sources)
55.56
-
-
... More
DAMP-PROOF COURSE
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone III)deliverd from natural sources: 4 graded stone aggregate 12.5mm nominal sizedeliverd from natural sources)
119.35
-
-
... More
PLINTH PROTECTION
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III)deliverd from natural sources : 6 graded stone aggregate 20 mm nominal size)deliverd from natural sources over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
55.35
-
-
... More
REINFORCED CEMENT CONCRETE WORKS
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting
of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
All works upto plinth level
Concrete of M25 grade with minimum cement content of 330 kg /cum
164.33
-
-
... More
All works above plinth level upto floor V level
Concrete of M25 grade with minimum cement content of 330 kg /cum
361.99
-
-
... More
FORM WORK
Centering and shuttering including strutting, propping etc. and removal of form for :
Foundations, footings, bases of columns, etc. for mass concrete.
282.35
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
181.8
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
Suspended floors, roofs, landings, balconies and access platform
1209.25
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
1430.16
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
Columns, Pillars, Piers, Abutments, Posts and Struts
756.07
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
Stairs, (excluding landings) except spiral-staircases
90.33
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards
348.96
-
-
... More
REINFORCEMENT
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
32839.15
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
67228.07
-
-
... More
BRICK MASONRY WORKS
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
Cement mortar 1:4 (1 cement : 4 coarse sand)
47.61
-
-
... More
IN SUPERSTRUCTURE
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
Cement mortar 1:4 (1 cement : 4 coarse sand)
11.27
-
-
... More
HALF BRICK MASONRY WORK
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
Cement mortar 1:4 (1 cement :4 coarse sand)
1942.2
-
-
... More
AAC BLOCK Providing and laying autoclaved aerated cement blocks masonry with 150mm/ 230 mm / 300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
16.76
-
-
... More
DOOR FRAME CHOWKATHS
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:
Profile C
Fixing with adjustable lugs with split end tail to each jamb
190.5
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).
Frame size 65 x 125 mm
133.65
-
-
... More
GRILL
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
Fixed to openings /wooden frames with rawl plugs screws etc.
3485.1
-
-
... More
FLUSH DOOR
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
88.2
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive
strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick
42.53
-
-
... More
DOOR FITTINGS Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws
etc. complete :
250x16 mm
34
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
150x10 mm
68
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
125 mm
68
-
-
... More
UPVC DOORS & WINDOWS
CASEMENT WINDOWS
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel.......... Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm)
8.1
-
-
... More
CASEMENT DOOR
Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished......accepted but no extra payment on this account shall be made.
Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm).
3.15
-
-
... More
ALUMINIUM WORK
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight.........(Glazing, paneling and dash fasteners to be paid for separately) :
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
Powder coated aluminium (minimum thickness of powder coating 50 micron)
1218.77
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)
142.3
-
-
... More
GLASS PANES FOR UPVC WINDOW/DOOR
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :
Float glass panes
5.0 mm thick glass panes (weight not less than 12.5 kg per sqm)
11.25
-
-
... More
COLLAPSIBLE SHUTTERS
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
9.45
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Hot finished welded type tubes
7690.31
-
-
... More
Providing and fixing bolts including nuts and washers complete.
100
-
-
... More
STEEL RAILING
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
140.4
-
-
... More
MARBLE FLOORING
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :
Raj Nagar plain
16.51
-
-
... More
Extra for marble stone flooring in treads of steps and risers using single
length up to 2.00 metre.
2.13
-
-
... More
KOTA STONE FLOORING
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
25 mm thick
66.27
-
-
... More
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
86.55
-
-
... More
Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre.
8.01
-
-
... More
TILES WORKS
ON FLOOR Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
889.85
-
-
... More
ON FLOOR (ANTI-SKID)
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
Glazed Vitrified tiles Matt/Antiskid finish of size
Size of Tile 600 x 600 mm
114.13
-
-
... More
ON WALLS
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
416.32
-
-
... More
ROOF INSULATION
Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183. Density 16 kg/m³, 50 mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire.
291.43
-
-
... More
ROOFING & ROOF TREATMENT
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
291.43
-
-
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
Ridges plain (500 - 600mm)
58.5
-
-
... More
RAIN WATER SPOUT AND PIPE
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
110 mm diameter
72
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Coupler
110 mm
6
-
-
... More
Single tee with door
110x110x110 mm
6
-
-
... More
Bend 87.5°
110 mm bend
6
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
110 mm
25
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms.
8
-
-
... More
GYPBOARD CEILING
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate ........complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)
800.78
-
-
... More
CEMENT PLASTER (IN FINE SAND)
12 mm cement plaster of mix :
1:4 (1 cement: 4 fine sand)
2563.19
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :
1:4 (1 cement: 4 fine sand)
2194.71
-
-
... More
CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT
15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :
1:4 (1 cement: 4 fine sand)
228.31
-
-
... More
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
214.11
-
-
... More
PAINTING WORKS
PLASTER OF PARIS & WALL PUTTY
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
5142.36
-
-
... More
CEMENT PRIMER Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
Water thinnable cement primer
4341.58
-
-
... More
WALL PAINTING (INTERIOR)
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
Two coats
2947.65
-
-
... More
EXTERIOR PAINTS / COATINGS
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.
New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
2194.71
-
-
... More
PAINTING ON WOOD AND STEEL BASED SURFACES
PRIMER COAT
Applying priming coat:
With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
800.78
-
-
... More
Applying priming coat:
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
471.06
-
-
... More
PAINT Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
Two or more coats on new work
471.06
-
-
... More
EXPANSION JOINT FILLER.
Providing and filling in position, blown bitumen in expansion joints.
0.27
-
-
... More
Providing and fixing sheet covering over expansion joints with iron screws as per design.
Aluminium fluted strips 3.15 mm thick.
150 mm wide
33
-
-
... More
PAVER BLOCK
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
258.45
-
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top lab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
8
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
150 x 100 mm size P type
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
-
-
... More
WATER PROOFING
Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.
107.11
-
-
... More
WATER SUPPLY AND SANITARY WORKS
-
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
1
-
-
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
15 mm nominal bore
20
-
-
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
15 mm nominal bore
20
-
-
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
16
-
-
... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia
5
-
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
16
-
-
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
150 mm diameter
5
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore
34
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
3000
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
15 mm nominal dia Pipes metre
100
-
-
... More
20 mm nominal dia Pipes metre
70
-
-
... More
25 mm nominal dia Pipes metre
50
-
-
... More
32 mm nominal dia Pipes metre
30
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
External work
32 mm nominal dia Pipes
50
-
-
... More
40 mm nominal dia Pipes metre
100
-
-
... More
50 mm nominal dia Pipes
70
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
20 mm nominal bore
12
-
-
... More
32 mm nominal bore.
3
-
-
... More
40 mm nominal bore
5
-
-
... More
50 mm nominal bore
5
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc 50 mm dia nominal bore
60
-
-
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.
Rocky strata including Boulders
300 mm dia
120
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
200 mm nominal size dia
50
-
-
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
11.78
-
-
... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
24
-
-
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
200 mm dia
2
-
-
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
200 mm clamp
2
-
-
... More
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).
200 mm clamp
2
-
-
... More
WASTE COUPLING
Providing, fitting and fixing Chrome Plated waste (pop-up type coupling complete as directed and specified.
17
-
-
... More
BOTTLE TRAP
Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified.
16
-
-
... More
FLOOR GRATING
Providing, fitting and fixing of Stainless Steel Floor Grating 150mm complete as directed and specified.
26
-
-
... More
Providing and fixing Chrome Plated Soap Dish of standard shape with bracket of the same materials complete as directed and specified.
16
-
-
... More
Providing and fixing Chrome Plated towel ring with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colou complete as directed and specified.
16
-
-
... More
Providing and fixing Chrome Plated towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm complete as directed and specified.
5
-
-
... More
Supplying, installation testing and commissioning of the IRON REMOVER Filter It has a maximum flow rate of 1000 L/hr.Inlet water Pressure/Temp. (Min.)
1.0 kg/cm²/1°C and Inlet water Pressure/Temp. (Max.)
10.7 kg/cm²/50°C with Mounting
Floor Standing
1
-
-
... More
SOIL, WASTE & VENT PIPES AND FITTINGS Providing, jointing and fixing SWR pipe Soil, Waste and Vent Pipe System The work shall be done as per technical specifications and in general shall include:
Material: swr pipes and fittings conforming to DIN EN 1451-1 and DIN 19560-10 (or equivalant internationally recognized standards)
Fittings shall include all standard moulded as well as fabricated fittings like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offsets and other specials
Jointing: Pushfit rubber ring jointing technique in general. Installation, Testing and Commissioning: The installation shall be complete in all respects including cutting chases / holes in walls, slabs, excavation, refilling and disposal of surplus earth where required and making good, etc
Pipework Support System: All pipework in shafts, ceiling voids and terrace shall be fixed/ supported using preformed, pre-galvanized steel elements and suitable fasteners requiring no welding at site. The supporting system shall be modular and adjustable in all the three planes. Cost for pipework support system shall be included in the rates
Making Good the Structure Crossings: For all horizontal and vertical crossings of building structure (slabs, walls, beams, column etc), the space between pipe and the structure shall be made good and water tight with concrete. The annular space between the pipe and the sleeves shall be sealed (upto a minimum depth 25 mm) with fire resistant acrylic based sealent of approved make and quality.
Note: Wherever core-cutting is asked for, it shall be paid extra as per relevent item in this BOQ.
40 mm dia
50
-
-
... More
50 mm dia
75
-
-
... More
75 mm dia
135
-
-
... More
110 mm dia
100
-
-
... More
160 mm dia
60
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floor wherever required :
W.C. pan with ISI marked white solid plastic seat and lid.( Model: ECS-WHT- 551PNPP184NLZ, Make: ESSCO )
15
-
-
... More
Providing and fixing white vitreous china extended wall mounting water closet of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.( Model: ECS-WHT-955SPP, Make: ESSCO )
1
-
-
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 355X270X450 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern ( Model: ECS-WHT-251 Make: ESSCO )
5
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
White Vitreous China Flat back wash basin size 470x360x130 mm with single 15 mm C.P. brass pillar tap. ( Model: AIS-WHT-101901 Make: ESSCO )
18
-
-
... More
INTERNAL AND EXTERNAL ELECTRICAL WORKS
-
-
-
... More
wiring for light point/fan point/exhaust fan point/call bell points with 1.5sq mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit,with modular switch,modular plate,suitable GI box and earthing the points with 1.5 sq mmFRLS PVC insulated copper conductor single core cable etc.
Group A
150
-
-
... More
Group B
70
-
-
... More
Group C
67
-
-
... More
Wiring for circuit/submain wiring alongwith earth wire with the following sizes FRLS PVC insulated copper conductor ,single core cable in surface /recessed medium class PVC conduit as follows
2x1.5 sq mm+1x1.5 sq mm earth wire
470
-
-
... More
2x2.5 sq mm+1x2.5 sq mm earth wire
1214
-
-
... More
2x4 sq mm+1x4 sq mm earth wire
710
-
-
... More
insulated annealed copper conductor unarmored telphone cable in the existing surface /recessed steel /PVC conduit as required
4 Pair
250
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case recessed conduit as required
20mm
50
-
-
... More
25mm
100
-
-
... More
Supply and fixing folloeing modular switch/socket on the existing modular plate & switch box including connectiobs but modular plate etc.as required
5/6 A switch
260
-
-
... More
2way 5/6 A switch
6
-
-
... More
15/16 A switch
25
-
-
... More
3Pin 5/6 A socket outlet
40
-
-
... More
6Pin 15/16 A socket outlet
25
-
-
... More
Telephone socket outlet
10
-
-
... More
bell push
8
-
-
... More
Supplying and fixing two module stepped type electronic fan requlator on the existing modular plate switch box including connections but excluding modular plate etc.as required
43
-
-
... More
Supplying and fixing modular blanking plate on the exisiting modular plate & switch box excluding modular plates as required
10
-
-
... More
Supplying and fixing following size/modules box along with modular base & cover plate for modular switches in recess etc.as required
1 or 2 Module(75mm x75mm)
70
-
-
... More
3 Module(100mm x75mm)
30
-
-
... More
4 Module(125mm x75mm)
10
-
-
... More
6 Module(200mm x75mm)
55
-
-
... More
8 Module(125mm x125mm)
25
-
-
... More
12 Module(200mm x150mm)
15
-
-
... More
Supplying and fixing following modular base & cover plate on existing modular metal boxes etc.as required
1 or 2 Module
12
-
-
... More
3 Module
30
-
-
... More
4 Module
10
-
-
... More
6 Module
55
-
-
... More
8 Module
25
-
-
... More
12 Module
15
-
-
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
4 way (4 + 12), Double door
4
-
-
... More
8 way (4 + 24), Double door
2
-
-
... More
12 way (4 + 36), Double door
1
-
-
... More
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
63 A
14
-
-
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required. Single pole
110
-
-
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. DB complete etc. as required.
10
-
-
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
40 A
9
-
-
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
63 A
4
-
-
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
200
-
-
... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.
25
-
-
... More
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
215
-
-
... More
Supplying and fixing call bell/ buzzer suitable for single phase,230 V, complete as required.
6
-
-
... More
Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat flexible, FRLS PVC insulated, copper conductor cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/door etc. as required.
200
-
-
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable,including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
43
-
-
... More
Supplying and fixing extra down rod of 10 cm length G.I. pipe,15 mm dia, heavy gauge including painting etc. as required.(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
30
-
-
... More
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.
200
-
-
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
Upto 450 mm sweep
14
-
-
... More
Earthing with GI earth plate 600mm x 600mm x 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long with charcoal/coke and salt as required
6
-
-
... More
Earthing with copper earth plate 600mm x 600mm x 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long with charcoal/coke and salt as required
8
-
-
... More
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
1
-
-
... More
Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
50
-
-
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)
50
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
Upto 35 sq. mm
100
-
-
... More
PANEL IN-DOOR Floor/Wall mounting (8 Out going)Supplying including installation, commissioning of vermin and dust proof totally enclosed cubical indoor type floor/wall mounting compartmentalize panel board of size 1.35M X 1.20MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom complete painting with 2 coats of Red Oxide metal primer and 2 coats of enamel paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly Wiring done with provision for one no 200 A 4pole MCCB as incomer and for 4 nos 4PN(125 Amps) out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items:1. 20mm X 3mm4 strip copper Bus-Bar 1.5 M length each ,2.1 No MFM,3. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue - 3 no, 2 A Slide fuse unit - 3nos
1
-
-
... More
supplying,installation & testing of the light fixture Basic all purpose surface and wall mounted 20W LED batten with anadiosed aluminum housing & integrated electronic driver with THD10%.LED sourface mounted, complete in all respects.
29
-
-
... More
supplying,installation & testing of the light fixture of 36W LED PANEL 4X1 Recessed Light , Environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling, complete in all respects.
25
-
-
... More
supplying,installation & testing of the light fixture of 36W LED PANEL 2X2 Recessed Light
A precisely designed decorative PMMA diffuser 2x2 panel light that unites a creative design with state-ofthe-art LED technology. The concept of protruded decorative diffusers achieves a great sense of novelty and flexibility with multiple diffuser designs while offering perfect illumination and greater uniformity, complete in all respects.
43
-
-
... More
supplying,installation & testing of the light fixture PLUTO 2X1
High efficacy 2x1 recess LED flat panel with high brightness LED for glare-free homogenous illumination.
Also for POP ceilings (supplied with wedge brackets), complete in all respects.
6
-
-
... More
supplying,installation & testing of the light fixture Orient Electric
Recess mounted downlighter with pressure die-cast aluminium heat sink & PC diffuser in white powder
coated finish with integral electronic low THD (10%) LED driver., complete in all respects.
74
-
-
... More
supplying,installation & testing of the call bell, complete in all respects.
8
-
-
... More
supplying,installation & testing of the Skirting light with LED - 230 V - 3 module, complete in all respects.
8
-
-
... More
supplying,installation & testing of the Lightron Stainless steel wall lamp (5 Watt)
10
-
-
... More
supplying,installation & testing of the light fixture of Decorative wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED lamp B22 base.Upto 1 N x 9 W LED Lamp , complete in all respects.
7
-
-
... More
supplying,installation & testing of the light fixture of CLIO LED WALL LIGHT Environmental friendly, new generation, energy saving, decorative IP 66 LED UP-down Luminaire with wall surface mounting using COB LED as light source, complete in all respects.
11
-
-
... More
supplying,installation & testing of the ceiling fan model no: 1200 mm/P/M White Sweeps(Oxaler), complete in all respects.
43
-
-
... More
supplying,installation & testing of the exhaust fan model no 300 mm Spring Air (Orient), complete in all respects.
14
-
-
... More
Supply, Receiving, unloading, handling, storing double handling, transport to exact location, laying, testing & commissioning of the 1100 Volts XLPE insulated FRLS PVC sheathed steel armoured/ Multi stranded cables as per IS-7098 Part- I and as per standard specification with end termination
COPPER CABLES FRLS 4 core 16 sq. mm. XLPE
30
-
-
... More
4 core 10 sq. mm. XLPE
140
-
-
... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
97
-
-
... More
supplying and laying 25mmx5mm G.I strip at .050metre below ground as strip earth electrode,including connection/terminating with nut,bolt,spring ,washer etc.as required(jinting shall be done by overlapping and with 2 sets of G.I nut bolt &spring washer spaced at50mm)
80
-
-
... More
Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 4.5 metre and upto 6.5 metre
7
-
-
... More
Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 40 mm
42
-
-
... More
Supplying the light fixture of LED POST TOP Circular LED post-top offering excellent uniform illumination and aesthetics in one go. Made up of Pressure Die Cast aluminium body and opal PC cover. IP 66 and IK 07 rating ensures it stands tall amid varied environmental conditions,without pole but with fixing arrangements.
7
-
-
... More
Supply, Receiving, unloading, handling, storing double handling, transport to exact location, laying, testing & commissioning of the 1100 Volts XLPE insulated FRLS PVC sheathed steel armoured/ Multi stranded cables as per IS-7098 Part- I and as per standard specification ALUMINIUM CABLES FRLS (ARMOURED)
4 core 35 sq. mm. XLPE
20
-
-
... More
Supply, Receiving, unloading, handling, storing double handling, transport to exact location, laying, testing & commissioning of Power/Control Copper Cables, Solid Copper conductor upto 6sqmm balance Stranded, XLPE Insulated, cores laid up, PVC tape innersheathed for
Multicore Cables, Unarmoured/Armour (Glavanised wire for cables up to 10 x 1.5 sqmm, 8 x 2.5 sqmm, 2 x 10 sqmm, 3 x 10 sqmm, 4 x 6 sqmm balance all galvanised
steel strip), extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1) 198
Copper CABLES FRLS (ARMOURED)
3 core 4 sq. mm. XLPE(CO)Ar CABLE 2XWY / 2XFY
50
-
-
... More
Supply, Receiving, unloading, handling, storing double handling, transport to exact location and fixing and testing of SUBMERSIBLE PUMPSETS Pipe Size(mm):50 mm,kW:5.50 kW,HP:7.5hp;Head
Range (m):52 m - 84 m,Discharge
Range (L / min):395 L / min - 245 L / min
1
-
-
... More
Supply, Receiving, unloading, handling, storing double handling, transport to exact loca with laying and testing FLAT THREE CORE SUBMERSIBLE CABLES 6.0 sq. mm ,Protection against rain water,Protection against ingress of small solid foreign bodies
60
-
-
... More
63 KVA Sub-Station
-
-
-
... More
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
9
-
-
... More
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
60
-
-
... More
Supplying of two lengths of channel iron 100 mm X 50 mm X 6 mm (9.56 kg per metre) double pole cross arm for three wire 11/33 KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts, washers etc and painting with primer and finish paint as required .
7
-
-
... More
Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
125 A,36KA,FPMCCB
1
-
-
... More
200 A,36KA,FPMCCB
1
-
-
... More
Supplying, installation testing and commissioning of 63 KVA,50Hz. 11/0.433 KV, 3 phase Aluminium wound Oil filled BIS Level-1 Distribution Transformer with Off Circuit tap change. (inluding the payment to be made to power supply authority for supervision charge) and making necessary arrangement for charging approval of the sub-station from the competent authority as directed and specified by the department.
1
-
-
... More
Supplying of 12 Mtr (SP-66) GI pole confirming to IS: 2713. for HT line.
2
-
-
... More
Supplying and installation and commissioning of vermin and dust proof totally enclosed double door cubical type compartmental floor mounting panel board of size 1.20 m ×1.00 m ×0.50 m made of 16 SWG1.66mm) thick CR sheet and 35 mm × 35 mm × 6 mm size angle and 35 mm ×6 mm flat iron having 4 nos legs at the bottom and G.I. Sheet reefing on the top complete painting with 2 coats of red oxide metal primer and 2 coats of enameled paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation including excavation of trench and brick soling etc. complete. with Provision for 1. one no 400 Amp 4 pole 415 Volt 50 Hz MCCB as incomer - 1 no 2. 250 Amp MCCB as outgoing - 2 nos. 3. 25 mm × 5 mm size 4 strip Alluminium Bus-Bar- 1 set 4. Poilt Lamp with integral ckt LED 110- 230 V (Red,Yellow,& Blue) - 3 nos 7. Voltmeter & Ammeter Selector Switch - 2 nos (Incoming & Outgoing Switch Gear of reqd. rating along will be measured and paid separately)
1
-
-
... More
Supplying of following sizes XLPE insulated,insulation screening with extruded semi conducting compound in combination with copper tape cores laid up inner sheath of PVC tape,galvanised flat steel strip armoured and overall PVC sheathed cable confirming to IS7098(Part-II) 1985 with latest amendments .Al Round Armourd 1Core,240sq.mm
20
-
-
... More
Supply ,installation, testing and commissioning of 11 KV CT/PT
1
-
-
... More
Supply ,installation, testing and commissioning of of 11 KV Gang Switch
1
-
-
... More
Supply ,installation, testing and commissioning of 11 KV DO Fuse
1
-
-
... More
Supplying and fixing of 11 KV 10 KA Lighting Arrestor set assembly complete as required and as directed by the departmen
1
-
-
... More
Supply and laying, of Control Cable copper 10 core x 2.5 sq mm
10
-
-
... More
Supply ,installation, testing and commissioning of of HT Trivector Meter
1
-
-
... More
Load Security as per APDCL Aproved Rate
30
-
-
... More
Supply and fitting Pole Clamp GI 50x 6 mm as required and as directed by the department
6
-
-
... More
Supply and fitting 11KV Danger Plate
2
-
-
... More
40 KVA D.G. Set.
-
-
-
... More
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
17
-
-
... More
Supplying with fitting and fixing of Koel Green or equivalent make Power Generator- DG set of 40 KVA Manual Control Panel Type of Engine cooling Liquid Cooled,Type of governer Mechanical,Number of cylinders (nos) 4,No of Strokes (nos) 4,Rated RPM of Engine (RPM) 1500,Fuel High Speed Diesel (HSD),Overload capacity Engine is capable of delivering an output of 10% in excess of rated KVA for a period of one hour in any period of 12 hours continous running, Specific Fuel Consumption (gm/kWh) 200 to 265,Starting voltage (volt) 12, Salient Features of Engine Turbo Charged Engine,Direct injection Fuel System complete with all accessories etc. as required complete and as directed by the Department.
1
-
-
... More
Supplying and fitting , fixing of POLYCAB INDIA or equivalent make 4 Core 35 Sq mm Copper Cable complete with all accessories etc. as required complete and as directed by the Department.
15
-
-
... More
Supplying and fitting, fixing of Manual Changeover with Current Limiter 100 A complete with all accessories etc. as required and as directed by the department.
1
-
-
... More
Conctruction DG PAD and shed as specified and directed by the departmnet .
1
-
-
... More
Hydra Charge
1
-
-
... More
FURNITURE WORK
-
-
-
... More
Supply and Installation of Metal Beds (Without Mattress) With Frame of MS Hollow Rectangular / Square Section. Size: 1829 mm x 914 mm . Make: Spacewwod Office Solutions(SOS)
24
-
-
... More
Supply and Installation of Executive Table with One side pedestal unit
Make: Spacewwod Office Solutions(SOS)
6
-
-
... More
Supply and Installation of VISITORS CHAIRS of SSF Revolving Chair with Revolving with back tilting
Make: Spacewwod Office Solutions(SOS)
6
-
-
... More
Supply and Installation of METAL ALMIRAH geeken Almirah Steel shelving cabinets
Make: Spacewwod Office Solutions(SOS)
12
-
-
... More
Supply and Installation of Study Table of Unbranded Executive Table with One side pedestal unit
Make: Spacewwod Office Solutions(SOS)
12
-
-
... More
Supply and Installation of Model: Aura visitor SSF Revolving Chair with Revolving with back tilting
Make: Spacewwod Office Solutions(SOS)
12
-
-
... More
Supply and Installation of Desk Top SPACTECH Three seater classroom desking drawing
Make: Spacewwod Office Solutions(SOS)
42
-
-
... More
Supply and Installation of Seminar room Chair with Collapsible Writing Pad. Make: Spacewwod Office Solutions(SOS)
40
-
-
... More
Supply and Installation of Modular Laboratory Counter (3.5LX.75hX.7511) with granite top and BWR grade ply shutter finished with decorative laminate.
Make: Spacewwod Office Solutions(SOS)
5
-
-
... More
Supply and Installation of Dining Table size (900x900x750)mm. Top of the Table made of wooden with. Make: Spacewwod Office Solutions(SOS)
6
-
-
... More
Supply and Installation of visitor's chair AARTI Non-Revolving and NonTilting chair without Armrest
16
-
-
... More
Supply and Installation of Round Stool for lab room. Make: Spacewood Office Solutions(SOS)
45
-
-
... More
Supply and Installation of Lineo Table - Lineo Meeting table -1650x900mm Top: PPB Material.
Color: Top top & Lipping - Moldau Acacia (Dark) 3026 - SD, Metal Structure - PO6 - Siemens Grey (Matt). Make: Space Wood Office Solutions(SOS)
4
-
-
... More
Supply and Installation of Wooden bed of LLOYD Wooden Single Bed WITHOUT STORAGE BOX
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%