Department Of Housing And Urban Affairs Tender
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Costs
EMD
₹ 6,31,000Document Cost
₹ 6,300Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_DHUA_31021_1Bid Award Id
ViewTender No
CE/HUA/TECH17/PTIII/2022-23/78Tender Authority
Department Of Housing And Urban Affairs ViewPurchaser Address
-Website
http://assamtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
15
-
-
Ploughing the existing ground to a depth of 15 cm to 25 cm and watering All kinds of soil
1500
-
-
Providing and laying in position cement concrete 1:3:6 (1 cement :3 Coarse sand: 6 graded stone aggregate 40mm nominal size) excluding the cost of centering & shuttering . All work upto plinth level.
46.5
-
-
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)
154.75
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
1.5
-
-
1:2:3½:9 (1 ordinary portland cement : 2 Fly ash : 3½ coarse sand (zone-III) derived from natural sources : 9 graded stone aggregate 40 mm nominal size derived from natural sources)
1.75
-
-
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources and using recycled concrete aggregate (RCA) as coarse aggregate and fine aggregate within permissible utilization of 20% each, Portland Pozzolana /Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum
87
-
-
All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum
11
-
-
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources and using recycled concrete aggregate (RCA) as coarse aggregate and fine aggregate within permissible utilization of 20% each, Portland Pozzolana /Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum
34
-
-
All works above plinth level upto floor V level
Concrete of M25 grade with minimum cement content of 330 kg /cum
90
-
-
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
2
-
-
Providing and laying in position specified grade of reinforced cement
concrete, excluding the cost of centering, shuttering, finishing and
reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate
20 mm nominal size)
35
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bars
5500
-
-
Centring and shuttering including stutting, propping etc. and removal of form for
Foundations, footings, bases of columns etc. for mass concrete.
250.37
-
-
Walls (any thickness) including attached pilasters, butteresses, plinth, and string courses etc.
154
-
-
Lintels, beams, plinth beams, griders, bressumers and cantilevers.
90
-
-
Columns, Pillars Piers, Abutments, Posts and Struts.
86
-
-
Shelves (Cast in- situ)
20
-
-
Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string course, bands, copings, bed plates, anchor blocks and the like.
778.9
-
-
Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more
11915
-
-
Brick work with F.P.S bricks of class designation 75 in foundation and plinth in cement mortar
1:4(1 cement : 4 coarse sand)
128.05
-
-
Half brick masonry with F.P.S bricks of class designation 75 in super structure above plinth level up to floor V level in cement mortar 1:4(1 cement : 4 coarse sand) including providing and placing in position 2 nos. of 6 mm. Dia M.S. bars at every third course.
962
-
-
FINISHING
CEMENT PLASTER (IN COARSE SAND
15 mm cement plaster on the rough side of single or half brick wall of mix :
1:4 (1 cement: 4 fine sand)
1298
-
-
12 mm cement plaster of mix :
1:4 (1 cement: 4 coarse sand)
1298
-
-
Providing and applying White Cement Based Putty of average thickness 1 mm, of approved brand and manufacturer,over the plastered wall surface to prepare the surface even and smooth complete.
1298
-
-
Wall painting with premium Acrylic Emulsion Paint of interior grade, having VOC (Volatile Organic Compound) content less than 50grams / litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
Two coats
1298
-
-
EXTERIOR FINISHING
Finishing walls with Acrylic Smooth exterior paint of required shade :
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied
@ 2.20 kg/10 sqm)
299
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.
513
-
-
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge.
45
-
-
FLOORING
CC Flooring for Food Plaza/ Sitting plaza And Open Space:
52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete
550
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
79
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
108
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
5
-
-
SOAK PIT
Construction of Soakpit 1.20 X 1.20 X 1.20 m filled with brickbats including SW drain pipe 100 mm dia long complete as per standard design
1
-
-
TRUSS WORK:
0.80 mm thick with zinc coating not less than 275 gm/m²
80
-
-
Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washer complete i) 0.80 mm thick with zinc coating not less than 275 gm/sqm
40
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes.
2313
-
-
ALUMINIUM WORK:
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
340.75
-
-
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.
30
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness.
4
-
-
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
4
-
-
STEEL WORK
I) Steel primer shall be of yellow zinc chromate included in the steel items
Providing and Fixing M.S. grill of required pattern in frames of windows etc. with M.S. flats, square or round bars etc all complete fixed to steel windows by welding including applying a priming coat of approved steel perimer
150
-
-
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
Using M.S. angels 40x40x6 mm for diagonal braces
7
-
-
Providing and laying factory made coloured precast Cement Concrete paver blocks thick of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 75 mm thick base using 40mm thick brick aggregate, jamuna sand over brick aggregate and coarse sand including sand filling in joints and beds of block complete , compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer’s specifications & direction of EngineerinCharge. 60mm thick C.C. paver block of M-35 grade with approved colour, design & pattern.
1233
-
-
HORTICULTURE AND LANDSCAPING
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
1500
-
-
Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).
1000
-
-
Supplying and spreading of sand in lawn area, including watering, and dressing complete.
650
-
-
Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) :
2.4.1 Screened through sieve of I.S. designation 20 mm
300
-
-
2.4.2 Screened through sieve of I.S. designation 16 mm
300
-
-
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.
1000
-
-
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
750
-
-
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
750
-
-
Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately).
2.10.1 In rows 5 cm apart in both directions
1200
-
-
2.10.2 With grass Turf
1200
-
-
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately)
200
-
-
Half brick circular tree guard in bricks, internal diameter 1.25 metre and height 1.2 metre above ground and 0.20 m below ground, bottom two courses laid dry and top three courses in cement mortar 1:6 (1 cement : 6 fine sand) and the intermediate courses being in dry honey comb masonry as per design complete:
2.15.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 5.0
50
-
-
Providing and fixing M.S. flat iron tree guard 60 cm dia and 2 m high, above ground consisting 4 nos 25 x 6 mm, 2.25 m long and 8 nos 25 x 3 mm 2 m long verticals M.S. flats, riveted to 3 nos 25 x 6 mm M.S. flat iron rings in two halves, fixing together at site with required six numbers of 8 mm dia and 30 mm long bolts, including painting two coats with synthetic enamel paint of approved brand and manufacture over a coat of primer. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be suitably fixed to the ground by embedding four legs of tree guard in pits of suitable dia and to a depth of 25 cm, refilling the pits with soil and ramming, complete in all respect as per satisfaction and direction of Officer-in-charge.
70
-
-
Edging with bricks laid dry length wise, including required excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within a lead of 50 m :
2.19.1 Common burnt clay F.P.S (non modular) bricks of Class designation 7.5
500
-
-
Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded).
250
-
-
Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.
350
-
-
Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.
800
-
-
Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge
1227
-
-
Cutting of designer hedge/edge removing of cut materials, cleaning, hoeing of hedge/edge bed watering manure and applying insecticides and fungicides etc.(excluding the cost of material which shall be supplied by the office in charge
2000
-
-
Supplying of floral foam brick premium quality high density (oasis or
equivalent) proper packing box (one Box containing 20 bricks of size 22.5 cm x 10.5 cm x 7.5 cm) at site of work including loading, unloading,carriage with all taxes paid etc.and as per direction of officer in charge.
200
-
-
Providing & fixing of White River (Stone) Pebbles size of 2" to 2.50" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.
200
-
-
Providing and applying anti termite treatment of infected trees i/c all branches/leaves by spraying chemical emulsion 0.5% (Chlorpyriphos 20% EC) concentration through power spray machine (@ 100 ml Chlorpyriphos per tree i/c cost of chemical) and as per direction of officer-in-charge
500
-
-
Providing and fixing of Tuflex Garden fencing Hexagonal net/or equivalent of green colour having contents ( Weight grams/sqm. 510 (+/- 8%)) in width of 60 cm. with bamboo of 90 cm. length. The bamboo should be painted with green colour paint of approved brand and manufacture (two or more coats) and fixed 30 cm. below ground level and 60 cm. above ground level at a distance of 1.50 mtrs. The net and bamboo should be binded with 2 mm. G.I. Wire at three places properly as per direction of Engineer-in-charge.
1000
-
-
FOLIAGE AND SHADE LOVING PLANTS
Providing and Displaying of Aglaonema Sam plant ht.30 cm well developed three in one, having 18 to 20 fresh, healthy and attractive colorful leaves in 35 cm size Earthen pot/Chali/Tray & as per direction of the officer-in-charge.
100
-
-
Providing and displaying of Chamaedorea elegans palm having ht. 60 cm to 75 cm, well developed with fresh and healthy leaves in 25 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge
100
-
-
Providing and displaying of Croton Challenger variety having ht. 30cm and above, well developed with full of fresh and healthy leaves in 20 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
100
-
-
Providing and displaying of Money Broad Leaves mounted on moss stick 1.20 m ht., 5 to 6 s in each pot, well developed with full of fresh & healthy leaves in size of 25 cm Top dia x 18 cm Bottom dia x 25 cm Perpendicular height Earthen pot/Plastic pot & as per direction of the officer-in-charge.
100
-
-
Providing and displaying of Philodendron emerald red colour mounted on moss stick 90 cm ht., having 3 s placed at equal distance, well developed with full of fresh & healthy leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
100
-
-
Providing and displaying of Schefflera Varieged, mounted on moss stick 90 cm ht., 3 to 4 s placed in each pot at equal distance, well developed with full of fresh & healthy bright leaves from bottom to top in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
100
-
-
SEASONAL PLANTS
Providing and Displaying Anemone hybrid (3 in one) variety well developed with fresh & healthy Flower in full bloom in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
300
-
-
Providing and Displaying Antirrhinum Hybrid dwarf variety, specimen (8-10) with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/Challi Pot and as per direction of the officer-in-charge.
300
-
-
Providing and Displaying Asiatic lilly hybrid variety (3 in one) in each pot having in full bloom 3 to 5 flowers 30 to 45 cm ht. well developed in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
300
-
-
Providing and Displaying Begonia rex having 15 to 23 cm ht., well developed with fresh & healthy foliage with 10 to 12 flowers in bloom in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
300
-
-
Providing and Displaying Dahlia double kenya variety in different colour well developed with 3 to 4 flowers in half bloom, good foliage stacked with Green painted Bamboo sticks, 45 to 60 cm height in 25 cm Earthen Pot/ Plastic Pot and as per direction of the officer-in-charge.
285
-
-
Providing and Displaying Daisy well developed with fresh & healthy foliage in full bloom in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
300
-
-
Providing and Displaying Dianthus dwarf specimen 6-8 in a pot with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/Nand as per direction of the officer-in-charge.
200
-
-
Providing and Displaying Gerbera Hybrid, well developed, with fresh and healthy foliage, fully blooms in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
200
-
-
Providing and Displaying Impatiens in different colour well developed fresh and healthy (3 in one) well bloomed in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
200
-
-
Providing and Displaying Marigold jaffri dwarf in different colour well developed with fresh & healthy foliage with 12 to 15 flowers in full bloom specimen plant 23 to 30 cm ht. in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
200
-
-
Providing and Displaying Pansy Hybrid Sakata in different colour specimen 6-8 in a pot with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/ Nand as per direction of the officer-in-charge
200
-
-
Providing and Displaying Caladium Hybrid variety 3 to 4 in a pot well developed with fresh & healthy foliage 30 to 45 cm ht. in different colour 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
200
-
-
Providing and Displaying Gaillardia double hybrid variety well developed 30 to 45 cm ht 20 to 30 fresh & healthy flower with green painted bamboo stick in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
200
-
-
Providing and Displaying Sunflower single well developed 8 to 10 half bloom buds multi branched in fresh & healthy full stacked with green painted bamboo stick stacking in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
100
-
-
Providing and Displaying Vinca different colour 6 to 8 well developed branch in full bloom stacked with green painted Bamboo stick in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
110
-
-
Bush Rose in different colour 2 to 3 healthy branch 30 cm and above ht.well developed with 8 or more flowers / flower buds in 20 cm Earthen pot /Plastic pot as per direction of the officer-in-charge.
100
-
-
Providing and Displaying Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge.
120
-
-
ORNAMENTAL PLANTS
Providing and Displaying Acalypha red well developed with fresh & healthy 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.
35
-
-
Providing and Displaying Adenium Obesum grafted well developed with fresh & healthy 30 to 60 cm ht. in 25 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.
35
-
-
Providing and Displaying Bamboo Buddha vally variety with umbrella shape having 120 to 135 ht. with fresh & healthy foliage well developed in 40 cm Cement pot multy branch, bushy as per direction of the officer-in-charge.
35
-
-
Providing and Displaying Bird of paradise well developed with fresh & healthy 90 to 120 cm ht in 30 cm Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.
35
-
-
Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
50
-
-
Providing and Displaying Cyprus Golden 30 to 45 cm ht. well developed good Golden colour foliage, Conial Shape in 25 cm Earthen Pots as per direction of the officer-in-charge.
10
-
-
Providing and Displaying Ficus Long Island topiary well developed with fresh & healthy 5 to 6 ball specific size and shape 120 to 150 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge.
15
-
-
Providing and Displaying Mascarena palm well developed with fresh & healthy foliage leaves 150 to 180 cm ht in 35 cm Cement Pot as per direction of the officer-in-charge.
15
-
-
GROUND COVERS PLANTS
Providing and stacking of Alpinia Variegated (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge
300
-
-
Providing and stacking of Asparagus marrie, well developed 15 to 20 leaves,full of branches and foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
300
-
-
Providing and stacking of Juniperus prostrata with 5 to 6 latral branches and green foliage in 20 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
300
-
-
Providing and stacking of Syngonium miniature dwarf, having height 30-45 cm. with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge
300
-
-
TREE PLANTS
Providing and stacking of Adansonia digitata (kalp vricksh) of ht 150-165cm in bag size of 25 cm as per direction of the officer-in-charge.
50
-
-
Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge.
50
-
-
Providing and stacking of Bassia latifolia (Mahua) of height 90-105 cm. in big polybag of size 25 cm as per direction of the officer-in-charge.
50
-
-
Providing and stacking of Bauhinia blakeana (Kachnar) of height 120-150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge
50
-
-
Providing and stacking of Bottle palm of ht. 210-240 cm bottom girth 30-35cm well developed in big HDPE bags.
50
-
-
Providing and stacking of Casuarina equisetifolia of height 150-165 cm in big poly bags of size 25 cm as per direction of the officer-in-charge.
50
-
-
Providing and stacking of Cassia siamea of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
50
-
-
Providing and stacking of Cassia javanica of height 120-150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
50
-
-
Providing and stacking of Dalbergia sissoo (Seasam) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
50
-
-
Providing and stacking of Ficus benjamina (green) of height 120-135 cm. with 6-8 branches and lush green foliage in g. bags of size 25 cm as per direction of the officer-in-charge.
50
-
-
Providing and stacking of Ficus bengalensis krishna of height 75-90 cm., multibranched in earthen pots of size 30 cm as per direction of the officer-in-charge
50
-
-
Providing and stacking of Ficus nuda of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge.
50
-
-
Providing and stacking of Fishtail palm of ht. 270-300 cm bottom girth 40-50 cm well developed in big size HDPE bags as per direction of the officer-in-charge.
50
-
-
Providing and stacking of Grevillea robusta (Silver Oak) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge
50
-
-
Providing and stacking of Inga dulcis (Jungle Jalebi) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
50
-
-
Providing and stacking of Eugenia jambolana (Jamun) of height 150-165cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
50
-
-
Providing and stacking of Tectona grandis (Teak) of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge.
50
-
-
SHRUBS
Providing and stacking of Bauhinia acuminata height 60-75 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge.
5000
-
-
Providing and stacking of Bauhinia tomentosa (yellow) of height 60-75 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge.
5000
-
-
Providing and stacking of Calliandra hybrida of height 105-120 cm., well branched, bushy in big size HDPE bag as per direction of the
officer-in-charge
1500
-
-
Providing and stacking of Cestrum nocturnum (Raat ki Rani) of height 60-75 cm. with 4-5 branches in bag of size 25 cm as per direction of the officer-in-charge.
1225
-
-
Providing and stacking of Euphorbia pulcherrima (dark red double bracts) well branched of height 60-75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.
646
-
-
Providing and stacking of Ficus panda of height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm asper direction of the officer-in-charge.
500
-
-
Providing and stacking of Hibiscus rosasinensis of height 90-105 cm., bushy in big size HDPE bag as per direction of the officer-in-charge.
500
-
-
Providing and stacking of Thuja compacta of height 75-90 cm., conical shaped, well formed with healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge.
500
-
-
CREEPER PLANTS
Providing and stacking of Allamanda cathartica of height 30 cm to 45 cm.in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
500
-
-
Providing and stacking of Bignonia venusta (Golden shower) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
100
-
-
Providing and stacking of Jasmine grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
300
-
-
MEDICINAL PLANTS
Providing and Stacking of Anjeer of height 75-90 cm. in poly bags
of size 25 cm as perdirection of the officer-in-charge.
300
-
-
Providing and Stacking of Ashwagandha of ht. 30 cm with multi branches in Poly bag of size 20 cm.as per direction of the officer-in-charge.
175
-
-
Providing and Stacking of Tulsi of ht. 30 cm with multi branches in Poly bag of size 20 cm. as per direction of the officer-in-charge.
300
-
-
Providing and Stacking of Alovera well developed in earthen pot of size 20cm as per direction of the officer-in-charge.
150
-
-
Providing and Stacking of Aprajita Blue well developed in poly bag of size 20 cm as per direction of the officer-in-charge.
300
-
-
TRANSPLANTATION OF TREES
Transplantation of trees with in a distance of 2km including excavation around existing tree, pruning of branches, lifting, loading and transportation of existing tree, digging pits for placing tree at new place, adding manure, sand, fertilizer, hormones and bio fertilizer to it. Levelled and neatly dressed and disposal of surplus materials from old existing and new sites to designated place. Each tree should be firmly secured to the stake so as to prevent excessive movement, flooding with water, treatment of roots, rope and gunny bags as per direction of the officer incharge. T&P and all required materials shall be arranged by the contractor and nothing extra shall be paid on this account.
(a) Girth of tree shall be measured at a height of 1m above ground level.
12.1.4 Girth of trees beyond 150cm.
10
-
-
WATER MUSICAL FOUNTAIN:
4 layer Musical fountain: Refer as per quatition Saptak Exterior: Details provided Area: Rectangular sizes 16 mtr x 8 mtr
1
-
-
Civil Works for fountains
1
-
-
COTTAGE (FOOD HUT)
Providing fitting, hoisting and fixing of roof trusses include. Perlins fabricated out of M.S. black-tubes conforming with sitting (8 nos RCC bench sitting each Hut)
3
-
-
COTTAGE (SITTING)
RCC Sloped Roof Hut Type Structure (Sitting) With RCC sitting. (8 nos RCC bench sitting each Hut)
2
-
-
BENCHES:
A. Providing & fixing cast iron designer benches with approved by Architect for sitting at Garden area: (Sitting 6 Nos)
6
-
-
B. Providing & fixing cast iron designer benches with approved (Sitting 4 nos.) by Architect for sitting at Food Zone Area:
6
-
-
BARGE BOARD
Providing barge board of size 200mm X 20 mm with 1st class local Hollock / Bonsum timber incl.
150
-
-
Supplying, fitting & fixing wooden Gazabo as per Architechtural drgs. of area 7.2sqm
3
-
-
CHILDREN PLAY AREA EQUIPMENTS
Supplying, fitting & fixing of 2 seater see saw ,Model no; SE MPS 59 Saptook Exterior
2
-
-
Supplying, fitting & fixing of Dobule Swing, Model no; SE MPS 43 Saptook Exterior
2
-
-
Supplying, fitting & fixing of Multi Play Station: Model no; SE MPS 12 Saptook Exterior
1
-
-
Supplying, fitting & fixing of Marry Go Round Model no; SE MPS 52 Saptook Exterior
1
-
-
Supplying, fitting & fixing of Rider Thrill Model no; SE MPS 153 Saptook Exterior
2
-
-
Supplying, fitting & fixing of Straight Climber: Model no; SE MPS 29 Saptook Exterior
1
-
-
Supplying, fitting & fixing of Bench: Model no; SE MPS 66 Saptook Exterior
15
-
-
Supplying, fitting & fixing of Merry-Go-Round
1
-
-
Supplying, fitting & fixing of Teeter-Totters
1
-
-
Supplying, fitting & fixing of Horizontal Ladder/Monkey Bars
1
-
-
PLUMBING & SANITARY WORKS:
Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
15
-
-
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
10
-
-
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern
20
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
25
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia
30
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
30
-
-
Providing and fixing toilet paper holder : C.P. brass
10
-
-
SOIL WASTE VENT PIPES AND FITTINGS:
Providing and fixing soil, waste and vent pipes : 100 mm dia. Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989.
60
-
-
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and includingcement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :
For 100 mm dia. Pipe
21
-
-
For 75 mm dia. Pipe
25
-
-
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS - 1729
2
-
-
75 mm dia Sand cast iron S&S as per IS - 1729
2
-
-
Providing and fixing plain bend of required degree. 100 mm dia Sand cast iron S&S as per IS - 1729
25
-
-
75 mm dia Sand cast iron S&S as per IS -1729
25
-
-
Providing and fixing heel rest sanitary bend 100 mm dia Sand cast iron S&S as per IS - 1729
4
-
-
Sand cast iron S&S as per IS - 3989
2
-
-
75 mm dia Sand cast iron S&S as per IS - 1729
35
-
-
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
100x100x100 mm Sand cast iron S&S as per IS - 1729
5
-
-
Providing and fixing collar: 100 mm Sand cast iron S&S as per IS - 1729
40
-
-
WATER SUPPLY:
Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & coldwater supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing.This includes testing of joints complete as per direction of the Engineer-in-charge. INTERNAL WORK - EXPOSED ON WALL 2025 (25 mm OD) pipe
30
-
-
2532 (32 mm OD) pipe
35
-
-
3240 (40 mm OD) pipe
35
-
-
Providing and fixing Polyethylene- Aluminium -Polyethylene (PE-AL- PE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc. with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc. Concealed installation including cutting chases and making good the wall etc. complete
walls etc. complete
75
-
-
1620 (20 mm OD) pipe
75
-
-
Providing and fixing Polyethylene- Aluminium- Polyethylene (PE-AL- PE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required ) e.g. elbows, tees, reducers, couplers & connectors etc. with trenching, refilling and testing of joints complete as per direction of the engineer in charge : External work External works:
4050 (50 mm OD ) pipe.
30
-
-
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 50 to 80 mm nominal bore
3
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore
5
-
-
32 mm nominal bore.
4
-
-
40 mm nominal bore
4
-
-
50 mm nominal bore
4
-
-
Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal
2
-
-
Vertical
2
-
-
Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : 150 mm dia. pipe
40
-
-
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 15 mm nominal bore.
20
-
-
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore.
20
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : 15mm nominal bore
15
-
-
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
10
-
-
HAND FOSSET/SHOWER
Supplying fitting and fixing spray Chrome Plated (C.P.) shower of approved brand as directed and specified. (Pipes will be measured and paid separately)
Lauret make (round hand fosset with 1.5 m PVC pipe with hook)
20
-
-
Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (b) Queen's collection/ The Stealth Ranger (For VIP use. Prior approval of Chief Engineer PWD (Bldg) must be taken before use) (i) Angular stop cock with wall flange
20
-
-
Providing and fixing CI cover with frame for RCC UGT / OHT
a) 560 mm dia internal dia DI cover with frame (Heavy duty total weight of the cover not less than 60 Kg)
2
-
-
Providing and fixing monoblock centrifugal pumping set with gun metal impeller with totally enclosed fan colled squirrel cage induction motor capable of discharging 100 LPM against 60m head complete with flow and pressure dial guage, base plate priming arrangement, with wiring, panel & equipments for water level controller to start / stop the pump automatically with protectionfor dry run etc. complete in all respects.
1
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS:12701 marked with cover & suitable locking arrangement and making necessary holes for inlet, outlet & overflow pipes but without fittings and the base support for tank.
6000
-
-
SEWERAGE (INTERNAL):
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter
10
-
-
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 100 mm diameter S.W. pipe
10
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
-
-
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia. R.C.C. pipe
100
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
-
-
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) complete as per design.
10
-
-
ELECTRICAL WORKS
WIRING IN PVC CONDUIT
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
Group A
100
-
-
Group B
100
-
-
Group C
100
-
-
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
8
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
1600
-
-
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
1200
-
-
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
1800
-
-
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
500
-
-
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
500
-
-
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
500
-
-
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
300
-
-
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
300
-
-
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
300
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 amps switch
300
-
-
2 way 5/6 amps switch
20
-
-
15/16 amp switch
100
-
-
3 pin 5/6 amp socket outlet
10
-
-
6 pin 15/16 amp socket outlet
25
-
-
Telephone socket outlet
20
-
-
TV antenna socket outlet
15
-
-
Bell push
2
-
-
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
25
-
-
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
20
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
1 or 2 Module (75mmX75mm)
45
-
-
4 Module (125mmX75mm)
15
-
-
6 Module (200mmX75mm)
15
-
-
8 Module (125mmX125mm)
5
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
10
-
-
Erection of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required.
25
-
-
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
110
-
-
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required
30
-
-
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.
30
-
-
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
Upto 450 mm sweep
10
-
-
510 mm sweep
10
-
-
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
5
-
-
MCCB, MCB & DB'S
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
4 way (4 + 12), Double door
6
-
-
6 way (4 + 18), Double door
4
-
-
8 way (4 + 24), Double door
4
-
-
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
4
-
-
Single pole and neutral
2
-
-
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
2
-
-
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.
25 amps
10
-
-
40 amps
8
-
-
63 amps
5
-
-
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
8
-
-
E A R T H I N G
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
-
-
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
300
-
-
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
300
-
-
MV CABLE LAYING
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Upto 35 sq. mm
50
-
-
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
50
-
-
Cu conductor armoured
3 X 25 sq. mm 1.1 KV grade Cu conductor armoured UG cable ( Polycab Brand)
50
-
-
Supplying of light fittings complete with all standard accessories as required.
LED Bulb: KOLORS brand 9watt model no: 2204BU09 (CW)
50
-
-
LED Bulb: KOLORS brand 0.5 watt model no: 2204BU00 (YW)NANO LED NIGHT LAMP
10
-
-
LED batten: KOLORS brand 20 watt model no: 2402BA20 (WW) KARIS LED BATTEN LIGHT
45
-
-
9 watt KARIS SURFACE LED PANEL LIGHT ROUND, Model no: 2403PL09S (WW)
10
-
-
12 watt KARIS SURFACE LED PANEL LIGHT ROUND, Model no: 2403PL12R (WW)
50
-
-
Supplying of approved make ceiling fan of double ball bearing of the following sizes with resistance type regulator and its all accessories suitable for operation on 230V single phase, 50 Hz, AC supply complete as required.
1200mm sweep (USHA/GEC/ CROMPTON/ BAJAJ/HAVELLS)
10
-
-
Exhaust Fan of the following sizes and its all accessories suitable for operation on 230V single phase, 50 Hz, AC supply complete as required.
380 mm sweep (HAVELLS/CROMPTON/ BAJAJ)
8
-
-
Supplying installation, testing commissioning of telephone tag block or similar specification of other approved makes. of the following sizes
10 Pair
2
-
-
Supplying installation, testing & commissioning of RJ 45 Single Module Socket or similar specification of other approved makes. of the following sizes
50
-
-
Supplying including installation, testing and commissioning of Readymade Panel board conforms to IS : 8623, IEC : 60439 made of Phosphatised powder painted wall mounting type complete with Ana log meter module cable Alley both LHS and RHS, Copper Bus bar, Din Rail, Neutral Bar, Earth Bar etc. with Provision for 1 No. 4 pole MCCB as incomer and provision for 12 Nos. FP MCCB out goings as specified and directed by the deptt. and comprising of the following electrical items: 1. Panel Board up to 250 A Incomer, O/G FP MCCBs 2. Meter Module- Digital (Provision for Ammeter, Voltmeter, Selector Switch, Control Fuses, Indicating lights, MCBs etc. 3. cable Alley 12 Way for incoming 250A
(Incoming and Outgoing MCCB of reqd. rating will be measured and paid separately)
1
-
-
GEYSER
Supplying and fitting fixing of electric storage water heater [Geyser] of AOS-Jaquar make) including necessary connection etc. as required complete and as directed by the Department. 6 Litre Capacity
8
-
-
10 Litre Capacity
2
-
-
Motor Pump Set 5 HP single Phase Centrifugal monoblock pump set (Crompton Greaves/ Aquatic/ CRI/ V-Guard make) 2900 rpm with DOL Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) .
2
-
-
Supplying fitting and fixing including necessary connection as approved by the Deptt.)of Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) of following type and capacity as specified and directed by the Department. ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) D.O.L Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make)0.5 TO 10 HP, 0.72 TO 20 A.
1
-
-
SUB-STATION EQUIPMENTS
SUPPLEMENT PLINTH AREA RATES FOR SPECILISED E&M SERVICES
Supplying installation testing and commissioning of 11/0.433KV Sub-Station equipments comprising H.T. Panel,Transformer, HT Cable, Bus trunking from Transformer to LT Panel, LT Panel, Automatic power factor corrector panel, Essential Panel i/c Earthing, inter connecting power cables in sub- station, safety equipments.
40
-
-
LT PUMP PANEL
PANEL IN-DOOR Floor / Wall Mounting (6 Outgoing)
Supplying Including Installation, Commissioning of vermin and dust proof totally enclossed cubical indoor type floor/wall mounting compartmentalized panel board of size 1.35Mx1.20Mx0.40M made of 16 SWG 1.66m thick CR sheet and 35mmx35mmx5mm size agnle having 4 no. legs at the bottom complete painting sith 2 coats of red oxide primer and 2 coats of enamel paint. The Panel board is to be erected in 1:3:6 PCC foundation including brick solling / grouting etc. complete neatly wiring done with provision for one no 125/160A 4 Pole MCCB or Switch Fuse Unit as incomer and provision for 6 nos. DP or TPN out going as specified and directed bythe deptt. cconfirming to IP 43 pretection comprising of the following electrical items.
1. 20mm x 3mm4 strip copper busbar 0.6 M length each
2. Digital 3 Phase Voltmeter Accuracy Class 0.5-1 No.
3. Pilot Lmap with Integral ckt LED 110-230V (Red, Yellow & Blue- 3 No.)
5. Voltmeter & Ammeter Selector Switch - 2 No.
6. 2A Slide Fuse Unit - 3 Nos.
(Incoming and Outgoing Switch gear of reqd. rating will be measured and paid separately)
5
-
-
MCCB, MCB & DB’S
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Double pole
10
-
-
40A
10
-
-
Supplying and fixing 40 amps rating, 415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Four pole
5
-
-
Supplying and fixing panel mounting open execution 25kA, 415V, 50Hz, 4P MCCB (Ics=Icu, adjustable Ir setting 0.7 without Enclosure) of the following capacity complete with making necessary connection as aproved, secified and directed by the deptt.
100A,25 KA, 415V, 50 Hz 4P MCCB
5
-
-
STREET LIGHT LUMINAIRES AND PANEL BOARD
FEEDER PILLAR-STL
Supplying and installation and commissioning of vermin and dust proof totally enclosed double door cubical type compartmental floor mounting panel board of size 1.20 m ×1.00 m ×0.50 m made of 16 SWG1.66mm) thick CR sheet and 35 mm × 35 mm × 6 mm size angle and 35 mm ×6 mm flat iron having 4 nos legs at the bottom and G.I. Sheet reefing on the top complete painting with 2 coats of red oxide metal primer and 2 coats of enameled paint. The panel board is to be erected in 1:3:6 RCC pole foundation including excavation of trench and brick soling etc. complete neatly internal wiring done as specified and directed by the department comprising of the following electrical items.
1. 40 Amp 4 pole 415 Volt 50 Hz MCCB as incomer - 1 no
2. 32 Amp 2 pole open execution with HBC fuse SDFU unit as outgoing - 3 nos.
3. 25 mm × 5 mm size 4 strip copper Bus-Bar- 1 set
4. 40 Amp 4 pole ON-OFF poser contactor - 1 No.
5. Surface mounting timer switch - 1 No.
6. 63 Amp bakelite HBC fuse kit-kat - 3 Nos
5
-
-
U. G. CABLE AND CABLE WORKS
Supply of heavy duty medium voltage cables as per Specification and IS 7098 part II, XLPE insulated, inner & outer sheathed, Screened stranded Al / Cu conductor unless or otherwise specified.The cable shall be laid as per the specification.
The unit rate shall include (1) Shifting of cable from site store to place of installation
(2) Testing of insulation and continuity of cable and submission of reports to the client's representative. 4.00 Sq.mm 3 Core armoured Cable
162
-
-
6.00 Sq.mm 3 Core armoured Cable
176
-
-
25.00 Sq. mm.3 & 1/2 Core armoured Cable
270
-
-
FABRICATION SITC of fabrication work from MS structure for other work with anchor fastner and necessary hardware with necessary welding has to be done to complete the job from ISA/ISMC/ PLATE.The job also includes to paint the structure with two coats of red oxide and two coats color of enamel paint as approved and recommended by consultant.
50
-
-
Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres.
10
-
-
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
100 mm dia
6
-
-
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.
63 mm dia (OD-63 mm & ID-51 mm nominal)
300
-
-
OVER HEAD LINE Supplying and fitting fixing of H.T. danger plate complete as required and as directed by the department.
10
-
-
OCTAGONAL POLE
Supplying including installation of the Octagonal poles shall be designed to withstand the maximum wind speed of 169 km/hr. The top loading i.e. area and weight of fixtures are to be considered to calculate maximum deflection of the poles and the same shall meet the requirement of BS:5649 Part VI 1982. The pole shaft shall have octagonal cross section and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding of the pole shaft. The welding of the pole shaft shall be done by Submerged Welding process. All octagonal pole shafts shall be provided with the rigid flange plate of suitable thickness with provision for fixing 4 foundation bolts. The base plate shall be fillet welded to the pole shaft at two locations i.e. from inside and outside. The welding shall be done as per process approved by Third Party Inspection agency. (BAJAJ/ PHILIPS/ VALMONT/ PARUTHI ENGR/Nezone make)
Pole Type BOP or equivalent-3030 Height 3 m
8
-
-
Pole Type BOP or equivalent-1230 Height 12 m
6
-
-
Single arm bracket 1500mm long for 3m to 10 metre. Poles.
10
-
-
TRANSFORMER
3 phase 50 Hz 400KVA , 11KV/433V, DYn11, core type double wound with copper conductor oil immersed ONAN cooled Distribution Transformer hermatically sealed corrugated tank arrangement having a no load voltage ratio of 11KV/433V with top HT & LT Bushings. Tappings +5% to –10% in steps of 2.5% shall be provided at line end of HV winding. Changing of taps shall be carried out by means Off load tap changing. Losses at 50% load will be 1225 Watt & at 100% load will be 3450 Watt. Losses shall be as per IS2026.: - 1 No.
Oil temperature indicator : - 1 No.
Winding Temperature Indicator : - 1 No.
LT Switchgear
433V LT Switchgear with 630A Aluminium busbars. Interconnection between Transformer and LT Switchgear shall be using Aluminium Busbar.: - 1 No.
Incomer : 630A FP 50KA Fixed MCCB Microprocessor Based release for O/L S/C protection: - 1 Set.
ON/OFF/TRIP Indication lamps for incomer with protection MCB: - 1 No.
1
-
-
DIESEL GENERATOR
Supplying including installation, testing and commissioning of Supply of 160 Kva Greaves Make Factory Built Supper Brand DG Set incorporating GREAVES Engine and Meccalte/ Equivalent alternator with AMF Panel with all STD Accessories like, AMF Logic Battery & SMPS Battery Charger, AVM Pads, Acoustic Enclosure, etc.
1
-
-
UNINTERRUPTED POWER SUPPLY
Supplying installation testing and commissioning of online UPS system with 30 minutes backup i/c batteries.
10
-
-
CCTV SYSTEM
Supplying installation testing and commissioning of IP based CCTV system for building security comprising of PTZ, Fixed camera, cabling, recording, display system and hardware and software support.
300
-
-
FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)
Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required.
10
-
-
Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.
10
-
-
Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
6
-
-
Supplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
6
-
-
Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.
5
-
-
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
10
-
-
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.
6 Zone
2
-
-
Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 10 Zone panel for fire alarm system 250 Watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required - 2 Nos.(one to act as standby) Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation / communication suitable for 20 Nos.talk back unit -1 set.
Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc. complete as required -1 set.
Amplifier change over switch for inter changing amplifier -1 No.
Monitor panel for loudspeaker complete with output selector, ON / OFF switch, fuse, visual indications etc. complete as required - 1 No.
Gooseneck microphone with stand and ON/OFF switch- 1 No.
Main ON / OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters, terminal blocks etc. complete as required -1 set.
Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos.12 volt, 60 AH each sealed maintenance free batteries -1 set.
2
-
-
PUBLIC ADDRESS SYSTEM
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.
1
-
-
Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.
10
-
-
Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating at 240 volt AC supply complete as required.
1
-
-
CABLING & WIRING
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
141
-
-
LIGHTING CONTROLS
Supplying, installation, testing and commissioning of Passive Infrared (PIR) technology based occupancy sensor having high performance, non regulating programmable type, suitable for connected load upto 10Amp, for mounting height up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.
5
-
-
FACADE LIGHTING
Supply,Installation,TestingandCommissioningofLEDRGB/RGBWfloodlightingluminaireforfacadelightingwithDie-castaluminiumhousing,powder-coatedfinish,offollowingwattage.Luminaireshallbecapableofproducingdynamiccolorchanginglightforwith16millioncolorsbyDMX/Ethernetbasedcontrol.Thebeamangleofthefittingshallbenarrow,medium,wideorasymmetricaspertherequirement.Luminaireshallbecompletewithdriverandcapableofoperatingatlinevoltagewithoutanyseparatepowersupplyfrom100-270VAC,50Hzwithpowerfactor0.9.Fixtureshallbesuitabletooperateatanambienttemperaturerangeof-10°Cto+50°CandshallbeIP65andIK06rated.LifetimeshallbeatleastL70:50000burninghoursat50°C.LuminaireshallbeconformingtoBIS(IS10322)andshallbecompletewithallnecessaryaccessoriesrequiredforproperworkingoffixtureincludingweatherproofconnectioncables,waterproofconnectorsetc. as required.
250 W
1
-
-
75 W
5
-
-
30 W
5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements