Chief Conservator Of Forest Tender

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed ofa 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. For Footing For Floor For plinth Beam

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement :1.5 coarse sand (zone -III): 3 graded stone aggregate 20 mm nomial size) For Footing Column upto FGL Plinth beam

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars,piers, abutments , posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 1 cement :1.5 coarse sand (zone -III) derived from natural sources : 3 graded stone aggregate 20 mm nomial size derived from natural sources) Column above FGL - 4.451 cum For Lintel beam -0.769 cum ST Column -1.111 cum Kit slab - 0.025

Centering and shuttering including strutting, propping etc. and removal of form for: Foundation,footings,bases of columns,etc. for mass concrete For Footing -

Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beam, plinth beams, girders, bressumers and cantilevers For PB - 35.400 sqm For LB - 12.300 sqm

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts -- 68.370 sqm ST Column -19.320 sqm

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:4 (1 Cement : 4 Coarse sand) Plinth wal -- 5.428 cum Steps -- 0.270 cum 0.203 cum 0.135 cum 0.068 cum

Half brick masonry with common burnt clay F.P.S. ( non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level. Cement mortar (1cement:3 coarse sand) Dedct. for Window -- 249.840 sqm Dedct.for Window - W1- -10.800 Dedct.for ventilation V1 -- -4.050 Sqm V2/v3 -- -1.080 Sqm Dedct.For Door -- -15.120 sqm Open space -- -4.200 sqm D2 -- -3.780 sqm

20 mm cement plaster of mix : 1:4 (1cement : 4 fine sand) Qty BF Item no. /6.13.1

Cement concrete flooring 1:2:4 (1cement : 2coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40mm thick with 20mm nominal size stone aggregate - 73.44 sqm Dedution of wall area -- -9.022 sqm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement:4 coarse sand), jointing with grey cement slurry @3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of tile 1000*1000 mm - 73.44 sqm Deduction of wall area - -4.46 sqm

Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood - Door D1

Providing and fixing 35mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-in-charge and panelling with panels of : (Note:- Butt hinges and necessary screws shall be paid separately) Door

Providing and Fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete 75 x 47 x 1.70mm

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below( tolerance ± 1mm) , with wall thickness 2.0mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S tube of size 19*19mm and 1mm ( ±0.1mm) wall thickness and 3 nos.stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge Extruded section profile size 48*40 mm

25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm * 25 mm or less as per requirement with an average wall thickness of 1mm (±0.3mm). PVC foam end cap of size 23*10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19mm * 19 mm and 1.0 mm(±0.1mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm * 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturers specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60±0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100*8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwaRES AND DRAINAGE OF WATER etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-charge (Single/double glass panes, wire mesh and silicon sealent shall be paid separately) Variation in profile dimension in higher side shall be accepted but no extra Three track three panels sliding window with fly proof S.S. wire mesh (Two nos. glazed & one no.wire mesh panels) made of (big series) frame 116x45 mm & sash 46x62 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/double glazing bead of appropriate dimension.(Area of window above 1.75 sqm) -- W1- 2.160 sqm , V1 -0.180 sqm ,V2/V3 - 0.540 sqm

Providin and applying plaster of paris 2mm thickness over plastered surface to prepare the surface even and smooth completeter

Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufactorers specification. Two or more coats applied on walls @1.25 Itr/10sqm over and including one coat .

Finishing with Deluxe Multi surface paint system for interious and exteriors using as per manufacturers specifications : Printing wood work with deluxe Multi Surface Paint of Required shade. Two or more coat applied @ 0.90 Ltr/10 sqm over an under coat of primer applied @0.75 Ltr/10 sqm of approved brand and manufactures

Steel reinforcement for RCC work including straightening,cutting,bending,placing in position and binding complete upto/Above plinth level. Total qty of TMT bar as per BBs Attached - Footing -- 10 - 210/ kg Column - main bar,16 mm-512 kg Stirrup , 8mm - 205/kg ST ( Column from plinth beam ) Main bars,12 mm- 78/kg ,Stirrup,8mm -58/kg Plint beam Main bar,16 mm-380/kg,stirrup.8mm -198/kg Lintels Main bars- 90/kg,Stirrup-57/kg, For Kitchen Sleb-38/kg

Providing and fixing M.S.grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to opening/ wooden frames with rawl plug screws etc. W-1 - 120.360/kg,63.720/kg V1 - 47.790/KG , 21.240 KG V2 - 12.744 /kg ,5.664/kg

Applying priming coat - With ready mixed red oxide zinc chromate prime of approved brand and manufacture on steel galvanised iron/steel work sqm

False ceiling - Pight incll heroviding & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanized with zinc.coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm,at1200mm c/c-- etc. 8 mm thick calcium silicate board made with calcareous & siliceous materials reinforced

Steel work in built up tubular(round,square or rectangular hollow tubes etc.)trusses etc. including cutting,hosting,fixing in position and applying a priming coat of approved - Hot finished welded type tubes -- 48.30 OD 1) Tie rod - 109744 kg,2) King post -14.44 kg ,3) Rafter - 115.52 kg 4) Purlin-72.2 kg 42.80 CD 5)Queen post-20.16 kg ,12.6 kg,7.56 kg ,6) Strut - 25.2 kg,25.2 kg,23.94 kg

Providing corrugated G.S.sheet roofing including vertical/cured surface fixed with polymer coated J or L hooks,bolt and nuts 8mm diameter with bitumen and G.I.limpet washers filled with white lead,including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surfaces),excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275gm/m2

Providing ridges or hips of width 60mm overall width plain G.S. sheet fixed with polymer coated J or L hooks,bolts and nuts 8mm dia G.I.limpet and bltumen washers complete ---0.63mm thick with zinc coating not less than 275 gm/m2

Providing and fixing precoated galvanised steel roofing accessories 0.50mm (+0.05%) total coated thickness,Zinc coating 120 grams per sqm as per IS:277,in 240 mpa steel grade,5-7 microns using self drilling/self tapping screws complete: Barge board(upto 300 mm

Adding 12% for internal electrification

Adding 9% for internal water supply and sanitary installation

GST