Bridge And Roof Company India Limited Tender
... More
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Technical
Technical
Financial
Class Of Bidder
... View More
Class-I local supplier
Bid Capacity
... View More
The bid capacity required in the given tender to bid having value is calculated using the formula: Bidding Capacity = [ { A x N x 1.5 } - B ] Where, A = Maximum turnover in construction works executed in any one year during the last 05 (Five) years taking into account the completed as well as works in progress. The value of completed works shall be brought to current costing level by enhancing at a simple rate of 7% per annum. N = Number of years prescribed for completion of work for which bids have been invited. [N = 2] B = Value of existing commitments and ongoing works to be completed during the period of completion of work for which bids have been invited. Additionally, the bidder's available bid capacity of work should be equal to more than the total bid value put to tender. The bidder should have successfully physically completed “similar work” during the last 07(Seven) years ending on the last date of month previous to the one in which tender is invited, not less than the followings: (i) 01 (One) Similar Completed Work costing not less than Rs. 2.83 Cr. (inclusive of all taxes)
OR, (ii) 02 (Two) Similar Completed Works each costing not less than Rs. 1.77 Cr. (inclusive of all taxes)
OR, (iii) 03 (Three) Similar Completed Works each costing not less than Rs. 1.42 Cr. (inclusive of all taxes) The value of executed works shall be brought to current costing level by enhancing the actual value of work at simple rate of 7% per annum, calculated from the date of completion to last date of receipt of applications for Tender. Formula for calculating the current costing level: Current Costing Level = Actual Value of Work * (1 + 0.07)^n, where n is the number of years from the date of completion to the last date of receipt of applications for Tender.
Technical Capacity
... View More
The bidder should have successfully physically completed “similar work” during the last 07 years. The required prior work experience includes: (i) 01 Similar Completed Work costing not less than Rs. 2.83 Cr. (inclusive of all taxes) OR, (ii) 02 Similar Completed Works each costing not less than Rs. 1.77 Cr. (inclusive of all taxes) OR, (iii) 03 Similar Completed Works each costing not less than Rs. 1.42 Cr. (inclusive of all taxes). “Similar works” mean “General Civil work with RCC structure” in any Sector in 1 agreement/contract completed satisfactorily within stipulated time frame/PDC. The value of executed works shall be brought to current costing level by enhancing the actual value of work at simple rate of 7% per annum. No specific percentage of similar works completed is mentioned.
Costs
EMD
₹ 7,09,000Document Cost
₹ 8,378Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_BandR_845979_1Tender No
B AND R/GO/51256/AR /NIT/CIVIL/P-24/01Tender Authority
Bridge And Roof Company India Limited ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
eNIT-Const-10-Nos-Type-III-Pkg-24-Jorhat
BOQ Items
... More
All kinds of soil
476
34
16269.68
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm. On plan) including disposal of excavated earth lead up to 50 m and lift upto 1.5 mtr disposed earth to be levelled and neatly dressed.
-
-
-
... More
All kinds of soil
1430.39
249
356853.7
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
-
-
-
... More
All kinds of soil
514.86
126
65335.73
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 and for all lift.
1175.44
308
362470.43
... More
Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing complete.
301.5
2624
791232.48
... More
Supplying chemical emulsion in sealed containers including delivery as specified
-
-
-
... More
Chlorpyriphos / Lindane emulsifiable concentrate of 20%
10.85
243
2646.86
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
-
-
-
... More
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
144.7
54
7854.32
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
348.6
311
108428.54
... More
CONCRETE WORK
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.
-
-
-
... More
1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)
56.41
8775
495031.6
... More
1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources )
17.01
8099
137774.37
... More
1:4:8 (1 Cement : 4 coarse sand : (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
4
7681
30726.6
... More
Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
85.56
549
46986.13
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.
30
69
2082
... More
Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
85.56
138
11828.67
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed by dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,leveiling & dressing & finishing the top smooth.
144.7
827
119771.08
... More
REINFORCED CEMENT CONCRETE WORK
-
-
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work using coarse aggregate & fine aggregate derived from natural sources, portland pozzolana/ordinary portland/portland slag cement, admixtures in recomended proportions as per IS:9103 to accelerate/retard setting of concrete, to improve durability & workability without impairing strength , including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering, finishing & reinforcement as per direction of the engineer-in-charge, for the following grades of concrete : Note : Extra cement upto 10% of the minimum specified cement content in design mix shall be payble seperately. In case the cement content in design mix is more than 110% of the specified minimum cement content,the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
... More
All works upto plinth level: Concrete of M25 grade with minimum cement content of 330kg/cum
154.26
9711
1498023.49
... More
All works above plinth level upto floor V level: Concrete of M25 grade with minimum cement content of 330kg/cum
282.43
12240
3457002.51
... More
Add for using extra cement in the items of design mix over and above the specified cement content therein.
87.34
835
73014.49
... More
Centering and shuttering including strutting propping etc. and removal of form work for :
-
-
-
... More
Foundations, footings, bases of columns etc. for mass concrete.
207.83
373
77715.95
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
310.38
813
252348.25
... More
Suspended floors, roofs, landings, balconies and access platform.
1266.07
930
1178470.62
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
812.41
738
600143.52
... More
Columns, pillars, piers, abutments, posts and struts.
946.16
976
924010.39
... More
Stairs (excluding landings) except spiral staircases.
49.46
798
39503.21
... More
Weather shade, Chajjas, corbels etc., including edges
127.27
989
125943.85
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-Mechanically treated bars of grade Fe-500D or more
17262.22
108
1879337.89
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
... More
Thermo-Mechanically treated bars of grade Fe-500D or more
35484.51
108
3863198.6
... More
BRICK WORK
-
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
Cement Mortar 1:4 (1 cement : 4 coarse sand).
68.48
8356
572269.56
... More
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
264.48
8492
2246207.48
... More
Providing and laying autoclaved aerated cement blocks masonry with 100 / 115mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
47.53
10795
513087.78
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
144.7
78
11367.63
... More
WOOD WORK
-
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
-
-
-
... More
Kiln seasoned and chemically treated hollock wood
2
90099
180199.68
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.
-
-
-
... More
Kiln seasoned and chemically treated hollock wood: 35 mm thick shutters
61.95
3050
188961.75
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :
-
-
-
... More
Kiln seasoned and chemically treated hollock wood
61.95
2476
153443.96
... More
Providing and fixing ISI marked flush door shutters conforming to IS 2202 (part I) decorativie type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters
-
-
-
... More
35 mm thick including ISI marked stainless steel butt hinges with necessary screws
56.7
3747
212478.71
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
56.7
487
27636.15
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (Twin rubber stopper)
62
78
4860.18
... More
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.
-
-
-
... More
250 x 16 mm
50
285
14262
... More
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.
-
-
-
... More
200 x 10 mm
60
110
6615.6
... More
150 x 10 mm
60
91
5505
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
100 mm
60
64
3879.6
... More
Providing and fixing wire gauge shutters using galvanized MS wire gauge of average width and aperture 1.4 mm in both direction with wire of 0.63mm, for door windows and clerestory windows with hinges and necessary screws : 35mm thich shutter -Kiln seasoned and chemically treated hollock wood
20
3813
76261
... More
Providing and fixing fly roof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3mm and nuts & bolts complete.
-
-
-
... More
Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.
108.36
1179
127836.63
... More
Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.
99
561
55568.7
... More
35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as anel, all complete as per manufacturer's specification and direction of Engineer in-charge.
-
-
-
... More
Non decorative finish (matt finish)
31.5
4210
132620.67
... More
STEEL WORK
-
-
-
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat of approved steel primer.
-
-
-
... More
Using M.S. angels 40x40x6 mm for diagonal braces
3.78
5805
21945.51
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
125
815
101931.25
... More
Providing and fixing precoated galvanised steel sheet roofing
accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating
120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7
microns epoxy primer on both side of the sheet and polyester top
coat 15-18 microns using self drilling/ self tapping screws complete :
-
-
-
... More
Ridges plain (500 - 600mm)
12.5
547
6839.38
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
-
-
-
... More
Fixed to openings /wooden frames with rawl plugs screws etc.
1274.4
240
305932.46
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
497.7
172
85997.58
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
-
-
-
... More
M.S. tube
360
190
68698.8
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
1000
94
94950
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
8.4
11411
95853.24
... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
50
224
11244
... More
ALUMINIUM WORK
-
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
For fixed portion: Powder coated aluminium (minimum thickness of powder coating 50 micron)
674.64
566
381994.66
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron)
674.64
685
462688.35
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.
-
-
-
... More
With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
115.44
1238
142952.82
... More
Extra for providing frosted glass panes 4 mm thick(weight not less than 10kg/sqm) instead of ordinary float glass panes 4 mm thick(weight not less than 10kg/sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
12
180
2163.96
... More
Filling the gap in between aluminium / stone / wood frame and adjacent rcc / Brick / Stone / Wood / Ceramic / Gypsum work by providing weather / structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600
-
-
-
... More
Upto 5 mm depth and 5 mm width
110
158
17391
... More
Upto 10 mm depth and 10 mm width
70
214
15045.1
... More
PLASTERING & POINTING WORK
-
-
-
... More
Cement Plaster (In Coarse Sand)
-
-
-
... More
12 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand)
916.59
357
327607.6
... More
15mm plaster on rough side of single brick work: 1:6 (1 cement : 6 coarse sand)
1374.88
411
566120.59
... More
20 mm cement plaster of mix : 1:6 (1 cement : 6 coarse sand)
2341.5
487
1140989.54
... More
6 mm cement plaster of mix.: 1:3 (1 cement : 3 fine sand)
654.19
307
201012.96
... More
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
122.38
73
8998.6
... More
Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125 gms. of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per 50 Kg of directions of Engineer-in-Charge.
122.38
83
10186.91
... More
Neat cement punning
140.84
2
376.04
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2356.53
150
354398.55
... More
Finishing walls with Acrylic Smooth exterior paint of required shade :
-
-
-
... More
New work (Two or more coat applied @ 1.67 ltr/10 sqm
over and including priming coat of exterior primer applied
@ 2.20 kg/10 sqm)
2341.5
202
474411.32
... More
Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade :
-
-
-
... More
Two or more coats on new work over an under coat of
suitable shade with ordinary paint of approved brand and
manufacture
189.39
232
44016.13
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
-
-
-
... More
Two coats
2356.53
147
347800.26
... More
Applying priming coat :
-
-
-
... More
With ready mixed red oxide zinc chromate primer of
approved brand and manufacture on steel galvanised iron/
steel works
127.44
67
8588.18
... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.
-
-
-
... More
With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre
61.95
74
4622.71
... More
With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
2356.53
78
184422.04
... More
FLOORING WORK
-
-
-
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
-
-
-
... More
Double charge vitrified tile polished finish of size: Size of Tile 600 x 600 mm
877.62
1562
1371114.5
... More
Providing and laying Vitrified tiles in different sizes (thickness to be
specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.
-
-
-
... More
Size of Tile 600x600 mm
82.2
1780
146377.65
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
-
-
-
... More
25 mm thick
24.19
2072
50128.94
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
89.11
2475
220582
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm
(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
106.08
1136
120516.43
... More
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
387.33
1139
441405.14
... More
WATER PROOFING TREATEMENT WORK
-
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
110 mm diameter
111
388
43097.97
... More
Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
-
-
-
... More
Coupler: 110 mm
8
145
1165.28
... More
Single tee without door: 110x110x110 mm
16
231
3705.92
... More
Bend 87.5°: 110 mm bend
16
160
2564.64
... More
Shoe (Plain): 110 mm
16
140
2252.8
... More
Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50 x 50 x 50 mm hard wood plugs screwed with MS screws of required length including cuting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete
-
-
-
... More
110 mm
125
375
46977.5
... More
Providing and fixing to the inlet mouth of rain water pipes cast iron grating 15 cm diametre and weighing not less than 440 grams.
16
58
930.56
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
-
-
-
... More
In 75x75 mm deep chase
167.08
315
52790.6
... More
Making khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete.
16
323
5179.68
... More
Grading roof for water proofing treatment with
-
-
-
... More
Cement concrete 1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 20mm nominal size)
23.31
9120
212592.33
... More
Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixedwith 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).
372
746
277805.88
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).
Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
-
-
-
... More
Frame size 50 x 100 mm
79.2
1035
82034.57
... More
ROAD WORK
-
-
-
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
450
219
98626.5
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and
proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
-
-
-
... More
60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
150
1132
169821
... More
80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
300
1227
368364
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
5
10459
52296.65
... More
SANITARY, WATER SUPPLY AND DRAINAGE WORKS
-
-
-
... More
SUBHEAD NO. 1 : SANITARY INSTALLATIONS
-
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (european Type W.C. pan) with seat and lid, 10 litre low level pvc flushing cistern,including flush pipe,with manualy controlled device within brackets handle lever,conforming to IS:7231,with all fittings & fixtures complete, including cutting and making good the walls & floors wherever required.
-
-
-
... More
W.C. pan with ISI marked white solid plastic seat and lid
20
6727
134556.6
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass piller taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
... More
White vitreous China Wash basin size 630X450mm with a single 15 mm C.P. brass pillar tap
10
3601
36010.9
... More
White vitreous China Flat back wash basin size 550 x 400 mm with single 15 mm C.P. brass piller taps
10
3316
33167.7
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
... More
Kitchen sink with drain board: 510x1040 mm bowl depth 200 mm
10
7620
76208.8
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
... More
Semi rigid pipe: 32 mm dia
30
110
3313.2
... More
Providing and fixing soil, waste and vent pipes
-
-
-
... More
100 mm dia: Sand cast iron S&S pipe as per IS: 1729
210
1236
259602
... More
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :
-
-
-
... More
100mm
45
198
8931.6
... More
Providing and fixing M.S. holder-bat clamps of approved design to Sand cast iron (spun) pipe embedded in and including cement concrete blocks 10X10X10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of cutting holes and making good the walls etc.
-
-
-
... More
For 100 mm dia Pipe
45
374
16854.3
... More
Providing and fixing bend of required degree with access door, insersion rubber washer 3mm thick, bolts and nuts complete.
-
-
-
... More
100 mm: Sand cast iron S & S as per IS - 1729
20
644
12888.4
... More
Providing and fixing plain bend of required degree
-
-
-
... More
100 mm: Sand cast iron S & S as per IS - 1729
10
501
5014.4
... More
Providing and fixing heel rest sanitary bend
-
-
-
... More
100 mm: Sand cast iron S & S as per IS - 1729
20
623
12466
... More
Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete:
-
-
-
... More
100X100X100X100 mm: Sand cast iron S & S as per IS - 1729
10
1261
12613.4
... More
Providing and fixing single equal plain junction of required degree with door, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
... More
100X100X100 mm: Sand cast iron S & S as per IS - 1729
10
815
8150.3
... More
Providing and fixing single equal plain junction of required degree
-
-
-
... More
100X100X100 mm: Sand cast iron S & S as per IS - 1729
10
704
7045.3
... More
Providing and fixing double unequal of junction required degree with door, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
... More
100X100X75X75 mm: Sand cast iron S & S as per IS - 1729
3
1253
3761.07
... More
Providing and fixing sand cast iron S & S off sets as per IS : 1729.
-
-
-
... More
152 mm off sets: With100 mm dia pipe
3
809
2427.42
... More
Providing and fixing terminal guard:
-
-
-
... More
100 mm: Sand cast iron S & S as per IS - 1729
20
477
9542
... More
Providing and fixing collar :
-
-
-
... More
100 mm: Sand cast iron S & S as per IS - 1729
20
485
9704.6
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:
-
-
-
... More
100 mm inlet and 100 mm outlet: Sand cast iron S & S as per IS - 1729
30
1704
51125.7
... More
Painting sand cast iron / centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate, grey of buff etc. over a coat of primer (of approved quality) for new work.
-
-
-
... More
100 mm diameter pipe
210
84
17734.5
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
30
248
7457.1
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P brass screws with concealed fitting arrangement of approved quality colour.
-
-
-
... More
600 mm long towel rail with total length of 645 mm width 78 mm and effective height of 88 mm, weighing not less than 190 gms
20
729
14580
... More
Providing and fixing PTMT soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make, weighing not less than 105 gms.
20
177
3553
... More
Providing and fixing 600 X 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete .
20
1713
34271
... More
Providing and fixing 600X120X5 mm glass shelf with edges round of supported on anodised aluminium angle frame with CP brass brackets and guardrail complete fixed with 40 mm long screws, rawl plugs etc. complete
20
1144
22881
... More
SUBHEAD NO. 2 : WATER SUPPLY
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.(Internal Work: Exposed on wall)
-
-
-
... More
15mm dia nominal bore
10
310
3107.4
... More
20mm dia nominal bore
84
394
33160.68
... More
25mm dia nominal bore
20
496
9922
... More
32 mm dia. Nominal bore
24
608
14599.2
... More
40 mm dia. Nominal bore
24
818
19652.64
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. (Internal Work: Exposed on wall)
-
-
-
... More
PN - 16 Pipe, 20mm OD (SDR-7.4)
84
309
26004.72
... More
PN - 16 Pipe, 25mm OD (SDR-7.4)
20
383
7676.8
... More
PN - 16 Pipe, 32mm OD (SDR-7.4)
24
435
10459.44
... More
PN - 16 Pipe, 40mm OD (SDR-7.4)
24
635
15259.2
... More
PN - 10 Pipe, 50mm OD (SDR-11)
12
809
9714
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
15mm dia nominal bore
108
539
58247.64
... More
20mm dia nominal bore
72
623
44916.48
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. (External Work)
-
-
-
... More
PN - 16 Pipe, 40 mm OD (SDR-7.4)
80
509
40727.2
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
-
-
-
... More
25mm nominal bore
4
646
2585.72
... More
32 mm nominal bore
4
716
2865.24
... More
40 mm nominal bore
4
858
3435.44
... More
50 mm nominal bore
4
1066
4265.8
... More
Providing and fixing brass stop cock of approved quality
-
-
-
... More
15mm nominal bore
-
-
-
... More
20mm nominal bore
30
398
11946.9
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
... More
25 mm nominal bore
4
484
1938.76
... More
Providing and fixing gun metal non-return valve of approved quality (screwed end):
-
-
-
... More
40mm nominal bore: vertical
2
1274
2548.06
... More
Providing and fixing CP Brass shower rose with 15 or 20mm inlet:
-
-
-
... More
100mm dia.
20
201
4039.8
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reiforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
4
2079
8316.16
... More
Providing and placing on terrace (at all floor levels) polythene water storage tank ISI:12701marked with cover and suitable locking arrangement and making necessary hole for inlet, outlet and overflow pipe but without fittings and the support for tank
5000
11
58900
... More
Providing and fixing PTMT, push cock of approved quality and colour.
-
-
-
... More
15 mm nominal bore, 98 mm long, weighing not less than 75 gms
10
117
1171.2
... More
Providing and fixing PTMT grating of approved quality and colour.Circular type
-
-
-
... More
100 mm nominal dia
20
40
806.2
... More
125 mm nominal dia with 25 mm waste hole
30
54
1648.2
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931.
-
-
-
... More
15 mm nominal bore
30
527
15817.5
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms
-
-
-
... More
15 mm nominal bore
10
856
8561.4
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931
-
-
-
... More
15 mm nominal bore
20
722
14444
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
... More
15mm nominal bore
50
607
30378.5
... More
SUBHEAD NO. 3 : DRAINAGE
-
-
-
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete
-
-
-
... More
150 mm diameter
140
718
100536.8
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:
-
-
-
... More
150 mm diameter S. W. pipe
10
1329
13298.2
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design:
-
-
-
... More
150 mm diameter S. W. pipe
130
837
108881.5
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kind of soil
-
-
-
... More
Pipes, cables etc. exceeding 80 mm dia. but not
exceeding 300 mm dia
140
506
70950.6
... More
Providing and fixing square-mouth S.W gully trap class SP-1 complete with C.I. grating brick masonary chamber with water tight C.I. cover with frame of 300X300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
-
-
-
... More
180 X 150 mm size P type: With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5
4
3077
12308
... More
Constructing brick masonary manhole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand(zone-III):3 graded stone aggregate 20 mm nominal size) fondation concrete 1:4:8 mix (1 cement: 4 coarse sand:(zone-III) 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregated 20 mm nominal size) finished with a floating coat of a neat cement complete as per standard design.
-
-
-
... More
Inside size 90x80 cm and 45 cm deep including C.I.cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg.): With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
28
14191
397362.56
... More
Extra for depth for manholes
-
-
-
... More
Size 90 X 80 cm: With common burnt clay F.P.S. (non modular) bricks with class designation 7.5
2
9869
19738.14
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality (M D - 10)
-
-
-
... More
Circular shape 500 mm internal diameter
6
1283
7698.42
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45X45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 long complete as per standard design
-
-
-
... More
With common burnt clay F.P.S. (non- modular) Bricks class designation 7.5
2
34035
68070.94
... More
INTERNAL AND EXTERNAL ELECETRICAL WORKS
-
-
-
... More
WIRING: WIRING IN PVC CONDUIT
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
-
-
-
... More
Group A
226
1232
278545
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
780
282
220685.4
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
750
333
250447.5
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
10
405
4055.8
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
100
533
53308
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
5/6 amps switch
50
125
6253.5
... More
3 pin 5/6 amp socket outlet
50
148
7407.5
... More
Supplying & fixing call bell/ buzzer suitable for single phase,230 volts, complete as required.
10
120
1202.2
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
40
448
17922.8
... More
Supplying and fixing modular blanking plate on the exixting modular plate and switch box excluding modular plate as reqd.
100
48
4857
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and switch, connection etc. as required. (For light plugs to be used in non residential buildings).
130
579
75297.3
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
50
711
35579
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
... More
Upto 450 mm sweep
30
546
16392.9
... More
MCCB, MCB & DB’S
-
-
-
... More
Supplying and fixing following way,single pole and neutral,sheet steel MCB distribution board, 240 volts on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,interconnections,powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator)
-
-
-
... More
12 way, Double door
10
2811
28110.8
... More
Supplying and fixing following way,horizontal type three pole and neutral,sheet steel MCB distribution board, 415 volts on surface/ recess, complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,interconnections,powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator)
-
-
-
... More
4 way (4 + 12), Double door
2
4967
9935.32
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,10 Ka, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole
144
310
44763.84
... More
Double pole
10
796
7965.7
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
63 amps
2
1255
2511.16
... More
100 amps
-
-
-
... More
Providing and fixing M.V. danger notice plate of 200 mm X 150mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
2
326
653.3
... More
EARTHING
-
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
8
9073
72585.28
... More
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
20
61
1238.6
... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required.
(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
70
1180
82619.6
... More
LIGHTNING CONDUCTOR
-
-
-
... More
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, GI tube, having single prong at top, with 85 mm dia 3 mm thick GI base plate including holes etc. complete as required.
12
629
7548
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)
160
153
24480
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)
50
239
11960.5
... More
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
4
146
587.72
... More
Erection of metallic pole of following length in cement concrete
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
-
-
-
... More
Above 6.5 metre and upto 8.0 metre
4
7365
29463.52
... More
MV CABLE LAYING
-
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
... More
Upto 35 sq. mm
200
469
93988
... More
MV CABLE JOINTING & END TERMINATION
-
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
2 X 6 sq. mm (19mm)
8
291
2331.36
... More
4 X 16 sq. mm (25mm)
2
375
750.44
... More
4 X 25 sq. mm (25mm)
2
382
765
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.
104
250
26015.6
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc., including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
2
571
1143.86
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
40
258
10345.6
... More
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
30
251
7540.8
... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required
-
-
-
... More
100 mm dia
10
2193
21930.1
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
-
-
-
... More
100 mm dia
10
803
8038.6
... More
150 mm dia
10
879
8791.5
... More
Soil replacement below foundation to improve bearing capacity of soil by excavating 3m earth (cost of excavation to be paid separately), compacting the base of excavated part then replacing it with sand and gravel compaction for 1m depth. The replacement material should be of good quality with a minimum dry density 1.7 gm/cc. Compaction should be at least 95% MDD (maximum dry density). After completion of sand gravel cushioning process, a plate load test to be done to check the achievement of desired SBC as per soil report. The total process to be done strictly as per direction of Engineer in charge. The item includes supply of all materials, labour, tools tackles ( including hand roller / surface vibrator) etc. complete.
-
-
-
... More
With road roller/ hand roller
213.79
4000
855160
... More
P/I metering arrangement in MS enclosure matching with the vetical /Horizotal TPDB to be fixed at the top of the DB i/c matching color as per following:0-500v, analog voltmeter with VSS control fuse-1set
-
-
-
... More
LED indicating lamp-3nos (MAKE: AE/L&T)
2
4668
9336.32
... More
Supplying , transportation & delivery at sight of 7M long MS steel tubular pole type 410 SP-3, with one coat of MS primer paint, and as per IS: 2713-1986 including MS bracket at the top about 0.7m long projection single arm arch bracket with 40m dia MS nipple for holding light fittings, , base plate, cap, earthing stud etc. with supply and fixing of weather proof 16 SWG thick G.I. Loop- box at the pole base weather proof type of 200 X 150X100 mm size having front with locking arrangement and with 4 pole terminal supported on insulators, 1 No. 15A kitkat fuse, earthing stud , duly connected, 2 Nos. 32mm bore polythene pipe embedded in concrete for cable entry & outgoing etc. as required. (The concrete foundation size : Under ground 400 x 400 x 1150 (depth) with above ground pedestral of 300 x 300 x 450, where loop boox to be accomodated. Erection of pole to be paid separetly.) Make : SUBHAM POLES or Equiv.
4
16556
66224
... More
Providing & installing pole wiring with 3 x 1.5 sq.mm PVC copper wire including earthing the pole and connecting to Loop in and Loop out box to installed at the base of the pole with connection and installed the M.S. box in cement concrete foundation. The pole shall be painted with 2 coats of aluminium paint over single coat of MS primer paint as per direction of E/I.
4
3580
14320
... More
Supply and installation of street light fitting including 45W LED, Smart Bright Essential and 40mm dia MS pipe of suitable length with clamping, wiring, connection as reqd. Philips cat no. BRP031 LED45 CW SLR GR PSU SPD OR EQIV.
4
5350
21400
... More
Supply & installation of GI earth spike of about 20mm dia X 1800 mm long in ground near each street pole including supply & installation of 8 SWG GI wire from earth spike to earthing bolt of street pole through 3/4" PVC pipe installed in Pole foundation, connection as required.
4
890
3560
... More
Supply of Alluminium conductor, PVC/XLPE insulated, armoured, overall PVC sheathed 1100 Volts Grade Power Cables Confirming to IS 1554 / 7098 ( Part - I ) 1988 with latest amendments of following sizes :
-
-
-
... More
2C X 6 sq. mm
100
234
23401
... More
4 X 16 sq. mm
50
437
21850
... More
4 X 25 sq. mm
50
536
26800
... More
Supply , transportation and delivery at site single Indoor 20W LED Tube light Batten type Fitting complete. Model - Essential SmartBright Batten, Equivalent to Philips cat no. BN170C LED20S-6500 PSU L120. or Equivalent.
104
1062
110448
... More
Supplying & Fixing surface ceiling/wall mounted 20W LED decorative round downlighter, Model - Sleek Surface Pro similar to Philips Cat No - SM296C LED20S-6500 PSU WH or Equivalent.
20
2456
49120
... More
Supplying & Fixing surface ceiling/wall mounted 20W LED decorative round downlighter, Model - Sleek Surface similar to Philips Cat No - SM251/261 LED20S 6500 PSU WH or Equivalent.
20
2022
40440
... More
Supply & Fixing of street light fitting including 25W LED, Smart Bright Essential, Philips BRP029 LED25 CW SLR GR PSU SPD OR EQIV..
20
2456
49120
... More
Supply , transportation and delivery at site following size of Ceiling/ Exhaust/wall bracket/PadestalFan of following description as reqd.(Usha/Bajaj/Khaitan/EPC or eqv.
-
-
-
... More
1200mm(48") sweep AC Ceiling Fan, Model striker 1 STAR (safety wire) & S3/P2 capacitor complete with downrod/Blade/ canopy.
30
3670
110100
... More
1400mm(56") sweep AC Ceiling Fan, Model striker 1 STAR (safety wire) & S3/P2 capacitor complete with downrod/Blade/ canopy.
10
4578
45780
... More
Metal exhaust light duty 230mm(9") Aeroclean LD GBD AC exhaust fan.
30
2109
63270
... More
Supply of Al Louver for 230 mm exhaust fan
30
200
6000
... More
Fixing only outdoor street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.
20
1500
30000
... More
S.I.T.C. of ISI marked 9 Ltr. capacity Water type portable fire extinguisher (IS:15683), with gun-metal cap and nozzle including initial fill & wall suspension bracket and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc.
2
8000
16000
... More
"NOTE:-
THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC INCLUDING GST."
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%