Bridge And Roof Company India Limited Tender
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Costs
EMD
₹ 3,01,000Document Cost
₹ 5,924Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_BandR_827428_1Bid Award Id
ViewTender No
B AND R/HO/71152/CIVIL /IPPS-3/NRL/ASSAM/NIT/01Tender Authority
Bridge And Roof Company India Limited ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
eNIT-Civil-Composite-Work-IPP3-ASSAM
BOQ Items
PIPE CLASS NP3 Internal Pipe dia. 500 mm
7
23653
3379
Supplying and laying in position PVC pipes conforming to IS:4985 Class - I for cable crossings, including cutting the pipe if necessary, lowering, laying in position to proper levels, slopes ,providing proper jointing as per code requirements or manufacturers recommendations, sealing the open ends of pipes with removable type PVC cap (Sealing cap will be paid separately under relevant items)etc. all complete as per drawings, specifications and directions of BANDR Engineer-in-Charge. For following NOMINAL OUTSIDE PIPE DIA (MM)
-
-
-
Pipe Class I Nominal outside pipe dia. 160 mm
200
117200
586
MISC. CIVIL AND STRUCTURAL WORKS FOR U/G PIPING AND OTHER CIVIL WORKS
-
-
-
Providing and laying brick masonry with locally available bricks of specified class (Brick of class lower than specified shall not be accepted) in cement mortar 1:4 (1 cement : 4 Coarse sand) in one or more brick thickness and in any shape in foundation and plinth for valve pits, drains, circular/square maholes, wing walls, etc. including providing recesses, openings, etc. including curing, finishing the joints flush below ground level and raking out joints in plinth with all labour and material, etc. complete as per drawings, specifications and direction of BANDR Engineer-in-Charge. For following Brick Class.
-
-
-
All materials including cement supplied by the Contractor and Following Brick Class
-
-
-
Brick Class 5
65
496080
7632
Providing 13mm thick average cement plaster in cement mortar 1:3 (1 cement: 3 sand) on brick walls/stone masonry/pitching or on concrete surfaces for manholes, valves pits, culverts, wing walls, etc. including cleaning and preparation of the surface, scaffolding, curing etc. for all depths and heights complete as per drawings specifications and direction of BANDR Engineer-in-Charge.
-
-
-
All materials including cement supplied by the Contractor.
110
40480
368
Supplying and fixing in position medium/ heavy duty CI manhole frame with lugs and cover conforming to IS-1726 including breaking of brick masonry or concrete surface to receive frame with lugs and making good the same with CM 1:3 including applying two coats of anticorrosive paint inclusive of all labours and materials etc. complete
-
-
-
circular size 500 mm dia. Medium duty of grade MD-10
3
25290
8430
LINING IN TANK FARM ETC.
-
-
-
Supplying and laying film lining with cement concrete lining of M-20 grade with 20mm and down size graded stone aggregates in tank farms or at any other place as directed etc, including preparation of sub-grade, supplying & compacting 75MM thick fine sand fill over sub-grade, laying 250 micron thick HM HDPE (Grade-I) FILM lining conforming to IS 10889 including stretching, jointing, overlapping as per manufacturer's specification/ recommendation, providing 10mm thick 1:6 cement mortar plaster on the film, disposal of surplus earth/ unserviceable material within a lead of 500M as directed, testing, laying concrete in alternate panels, shuttering the edges, curing, finishing the top surface smooth including including dewatering of accumulated water from any source and keeping the surface dry for subsequent works etc. complete as per drawings, specifications and directions of BANDR Engineer-in-Charge.
-
-
-
For concrete thickness of 100mm on horizontal surface (All materials including cement supplied by contractor)
170
180030
1059
Providing 20mm wide and 25mm deep contraction/construction joint in concrete lining for tankfarm or at any other place as directed etc. including cleaning the joints of all loose materials, providing sealing joints as per IS: 5256, sealing compound conforming to IS: 13143, finishing the joint, clearing the adjoining surface after sealing etc. complete as per drawings, specifications and the directions of Engineer- in-Charge. (All material shall be supplied by contractor)
-
-
-
For lining depth of 100mm
10
11930
1193
Providing 20mm wide expansion joints in concrete lining for tank farm or at any other place as directed etc. including cleaning the joint of all loose materials and filling with bitumen mix filler to full depth except for 25mm depth at top, filling top portion of 25mm depth with approved hot sealing compound, joint sealing shall be as per IS: 5256 and sealing compound shall confirm to IS: 13143, finishing the joint, clearing of the adjoining surface after sealing etc., complete as per drawings, specifications and the directions of BANDR Engineer-in-Charge.
(All material shall be supplied by contractor)
-
-
-
For lining depth of 100mm
30
21480
716
ARCHITECTURE
-
-
-
FLOOR FINISHING
-
-
-
Providing and laying average 25mm cement concrete flooring in panels consisting of base course of 1:2:4 grade cement concrete (6mm down size stone aggregate) laid over sub-base of cement concrete and finishing with a layer of floating coat of neat cement slurry @ 2.75kg. of cement per Sq. M. of area including cleaning the sub-base surface, applying neat cement slurry @ 2.75 kg of cement per Sq. M. of area over the sub- base to receive the base course, compacting, tamping, trowelling, finishing, curing, providing, shuttering to the edges etc. all complete.
CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST .
-
-
-
25mm thk. cement concrete flooring. CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST .
75
26625
355
Providing and laying cement concrete granolithic flooring in panels consisting of base course (under layer of 1:2:4 grade cement concrete, 6mm down size stone aggregates) laid over sub-base, wearing top- layer of cement mortar (1 cement: 3 coarse sand by volume) finished smooth by tamping, trowelling, and with a finishing floating coat of neat cement slurry @ 2.75kg. of cement per Sq. M. of area including cleaning the sub-base surface, applying neat cement slurry over the sub- base @ 2.75Kg of cement per Sq. M of area to receive the base course, compacting, tamping, trowelling, finishing, curing, providing, shuttering to the edges etc. all complete.
-
-
-
With average 25mm thick under-layer and 15mm thick top layer. CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST.
15
9315
621
50mm thick heavy duty flooring
-
-
-
Providing and laying average 50mm thick heavy duty flooring in panels consisting of base course of 35mm thick cement concrete (1 cement : 1.5 coarse sand : 3.5 stone aggregates of 10mm to 6mm size by volume) laid over sub-base and 15mm thick finishing layer consisting of cement and integral hardening compound mixed in ratio of 4 cement :1 hardenar (by weight) :2 stone agrgregates of 6mm and down size laid integral with base course and finished smooth including cleaning the sub-base surface, applying neat cement slurry @2.75 Kg of cement per Sq.M of area over sub-base to receive the base course, levelling, tamping, trowelling, finishing, curing, providing shuttering to the edges etc. all complete. CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST.
30
19380
646
Providing and laying 125mm high cement plaster skirting with 1:3 cement mortar (1 cement : 3 coarse sand by volume) finished with a floating coat of neat cement slurry @ 2.75kg. of cement per Sq.M of area including rounding of junctions with floor, preparing the wall surface, making recess in the wall, finishing, curing etc. all complete.
-
-
-
18mm thick. CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST.
50
3550
71
Panel dividers in flooring/dado
-
-
-
P.V.C. panel dividers ( 3mm x 20mm size.)
150
7500
50
P.V.C. panel dividers ( 3mm x 35mm size.)
30
1680
56
P.V.C. panel dividers ( 3mm x 40mm size.)
60
3540
59
Providing and laying machine cut chissel dressed kota stone slab of approved shade in floor tread, landing, riser, skirting, dado over and including a bed of cement mortar including preparing the base surface, applying neat cement slurry @ 2.75 Kg of cement per Sq.M of area to receive the mortar, providing neat cement slurry @ 4.4kg. of cement /Sq.M of area over the mortar bed, jointing each slab with neat cement paste/ grouting white cement and pigment ( conforming to IS : 2114, Table-1, matching the shade of slabs), machine cutting of the slab edges square, true & plumb finishing, grinding, polishing, finishing etc. all complete.
-
-
-
25mm thick kota stone slab (with tolerance +_2mm for thickness, +_2mm for length/ breadth) in floor, landing tread over average 15mm thick cement mortar 1:4(1 Cement : 4 coarse sand by volume). CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST.
13
14534
1118
18mm thick kota stone slab in riser, dado, skirting over average12mm thick cement mortar1:3(1 cement:3 coarse sand by volume). CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST.
1
1131
1131
Extra for providing round nosing by machine cutting of the slab.
2
526
263
Providing and laying tiles in flooring , dado, skirting etc. in approved colour, design and pattern, laid over and including a coating of approved adhesive as per manufacturers specifications, flush pointing of joints of tiles with cement paste/ grouting with white cement and pigment (conforming to IS:2114, Table-1, matching the shade of tiles) finishing, cleaning etc. all complete.
-
-
-
Decorative, matt/ mirror finish homogeneous double charge Vitrified porcelain tiles of minimum size 600mm x 600mm x 10mm thick in approved quality, colour, make, design/ pattern
50
78100
1562
Providing and applying pigmented (approved shade) chemical and abrasion resistant, solvent based self levelling floor coating based on epoxy resin with amine curing agents, in 2 coats @ 125 gms/sq.m. (min.)per coat by brush or spraying over a levelling screed (min. 3mm thick) of a 3 part solvent free combination of epoxy resin, amine hardeners and graded chemically inert aggregate filler, laid over a coat of 2-part epoxy resin primer applied over existing flooring etc. all as per manufacturer's specifications.
4
4984
1246
Providing and applying pigmented (approved shade) chemical and abrasion resistant, solvent based coating (on dado/wall) of epoxy resin with amine curing agents, in 2 coats @ 125 gms/sq.m. (min.) per coat by brush over plastering/ concrete surfaces including surface preparation, curing etc. all as per manufacturer's specification.
5
6580
1316
Providing and laying minimum 18mm thick approved premium quality and shade polished granite stone slabs in flooring, counters, treads, risers, skirting, dado etc. over and including a bed of cement mortar including preparing the base surface, applying neat cement slurry @ 2.75 kg. of cement per sq. mtr. of area to receive the mortar bed, jointing each slab with neat cement paste/ grout with white cement maixed with pigment (conforming to IS:2114, Table-1) to match the colour of the granite stone slabs, finishing etc. all complete.
-
-
-
Granite stone slabs in flooring, counters, treads etc.(perfectly levelled) over and including a bed of cement mortar 1:4 (1 cement: 4 coarse sand by volume) CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST
10
50090
5009
Granite stone slabs in risers, skirting, dado etc. over and including a bed of cement mortar 1:3 (1 cement: 3 coarse sand by volume) CEMENT SUPPLIED BY THE CONTRACTOR AT THEIR COST.
1
4055
4055
Extra for round nosing/ moulded edges (as per approved design) to Granite stone slabs.
2
868
434
Providing and laying anti slip (rough)Granite stone slabs, of thickness minimum 25mm, in flooring, landing, tread, ramps over minimum 20mm thick cement mortor1:4 (1 cement :4 course sand by volume) over and including a bed of cement mortar including preparing the base surface, applying neat cement slurry @ 2.75 kg. of cement per sq. mtr. of area to receive the mortar bed, jointing each slab with neat cement paste/ grout with white cement mixed with pigment (conforming to IS:2114, Table-1) to match the colour of the granite stone slabs, finishing etc. all complete.
-
-
-
Cement supplied by the Contractor at there cost
1
3947
3947
Providing 3 nos. of 3mm grooves at spacing of 30mm in Kota/ Marble/ granite stone laid in stairs¿ treads/ landings all complete as per the direction of BANDR Engineer in Charge. (Single measurement shall be considered for 3 parallel grooves)
10
1970
197
WOOD WORK
-
-
-
Wooden frames of doors, windows, ventilators Providing and fixing wooden frames of doors, windows, ventilators including cutting, shaping, jointing, applying a coat of bituminous paint on concealed surface, wood primer on exposed surface, fixing in masonry/RCC by means of 300mm x 25mm x 6mm thick M.S. hold fasts screwed to frame @ 600mm max vertically and grouted with M-15 grade concrete in min. 350mm x 100mm x 100mm sized hole made in masonry/96mm long, 12mm dia M.S. dash fastener, painting with two coats of approved shade and make (ICI or equivalent) synthetic enamel paint over approved quality primer coat, finishing etc. all complete.
-
-
-
Wooden frames with approved quality local hard wood (Champ, Sisam, Sal etc. conforming to IS : 4021).
0.1
10622
106222
35mm thick block board flush shutter Providing and fixing Factory made, overall 35mm thick block board flush shutter consisting of solid core block board bonded with phenol phormaldehyde synthetic resin conforming to IS : 848 and faced on both faces with commercial type plywood/teakwood veneering/ lamination bonded with phenol formaldehyde synthetic resin conforming to IS : 848, including providing and fixing second class teakwood perimeter beading fixed by means of approved quality neoprene based adhesive and nailing @ 300 mm max.. painting exposed surface with two coats of approved shade and make synthetic enamel paint over approved quality primer coat, providing and fixing 125mm long M.S. butt hinges [for each shutter (vertical spacing not exceeding 600mm)] including fixing with door frame, finishing etc. all conforming to IS : 2202.
-
-
-
Door shutter faced with 1mm thick approved quality lamination of approved shade/brand.
2
8496
4248
Extra for providing and fixing square or rectangular vision panels in door shutters of 4mm thick plain glass (wt. 7.2kg/Sq.M) and conforming to IS : 2835 with 20mm x 10mm Teakwood beading fixed by approved quality neoprene based rubber adhesive and nailing @ max. 300mm c/c, including all cutting, fixing, providing 2 coats of approved quality Polyurithane transparent coating with stainer mix to achieve the desired shade on the teak wood etc. all complete. (Measurement for payment to be made only for the glazed area of vision panel).
0.1
350
3508
Providing and fixing in position following items including all necessary fixtures, fittings, finishing etc. all complete.
-
-
-
Approved make heavy duty overhead hydraulic door closer with adjustable spanners, metal screws etc. conforming to IS : 3564
1
1477
1477
Approved make Chromium plated metallic (brass body) mortice lock, 6 levers conforming to IS : 2209 (inclusive of pair of handles of pressure die cast zinc alloy,satin finished).
1
1936
1936
Approved make pressure die cast zinc alloy, chromium plated door handle. 150mm long
2
466
233
Approved quality 3mm thick plastic kick/push plate fixed with brass screws.
1
1291
1291
Approved quality anodized aluminium tower bolts conforming to IS-204 in Bronze colour, 250 x 10mm.
1
181
181
Approved quality anodized aluminium tower bolts conforming to IS-204 in Bronze colour, 150 x 10mm.
1
124
124
Approved quality zinc alloy pressure die cast, chromium plated spring loaded round door stopper with double heavy duty rubber shoes.
1
203
203
Approved quality 75mm long aluminium toilet door latch with vacant/occupied indicator.
1
744
744
Approved quality chromium plated brass coat and hat hook fixed with chromium plated brass screws.
1
121
121
Providing and fixing minimum 12mm thick X 50mm wide teak wood Architrave (moulding) of approved design along frames etc. including lacquer polishing/ painting matching with adjoining wood work.
10
5700
570
STEEL/AL./GLAZED/FULLY GLASS/PVC DOORS,WINDOWS & VENTILATORS
-
-
-
Steel glazed/ louvered window/ ventilators Supplying, fabricating, and installing steel glazed/ louvered window/ ventilators in accordance with BANDR/EIL standards consisting of Mild steel sections for frame and shutters including mitred jointing, welding, fixing (with 100mm x 15mm x 6mm MS lugs grouted with M-20 concrete in minimum 150mm x 50mm x 50mm sized hole in masonry/ anchor fasteners (minimum size 6mm dia, 75mm long ) @ 600mm maximum spacing in RCC) , all hardware such as hinges, peg stays, handles, weather bars, striking plates, coupling bars etc., glazing, MS sheet louvers, painting (minimum 2 coats of synthetic enamel paint including & over primer coat & finishing. Reference BANDR/EIL standards: 7-75-0027, 0028,0029,0031, 0032.
-
-
-
M.S. sheet louvered window/ ventilator with sections as per IS : 7452/1038
1
3947
3947
Fully Glass Door Providing and fixing frameless single piece Glass Doors (swing shutter) in partition made of 12mm thick toughened float glass (MODIGUARD or equivalent) single shutter with stainless steel finish patch fittings (DORMA or approved equivalent)and 150mm x 44mm extruded Aluminium frame at bottom , including all hardware such as SS patch fittings, floor spring, pivot on top, locking arrangement (EVERITE or approved equivalent make), 30mm dia, 350mm long SS pull handle ( DORMA or approved equivalent make) etc. all complete.
1
8770
8770
Etching Film on Glass Providing & applying translucent cast vinyl self adhesive washable type film with sandblasting effect (of '3M(TM) Scotchcal(TM) Frosted Crystal 7725-324' or approved equivalent) and of approved graphic design (electronic/ computer plotted & cut) having durability of 10-15 years, over glass surface in doors/ windows/ partitions etc. including preparation of base surface, cleaning, finishing etc. all complete.
1
1754
1754
Pressed steel sheet door shutter Providing and fixing pressed steel sheet door shutter made of 18 SWG galvanized pressed steel sheet bent to form hollow box of 40 mm overall thickness; and consisting of/ including:
(i) 3 mm thick MS flat all along perimeter
(ii) Packing the shutter with mineral wool (48 kg/cum) without gap
(iii) Strengthening with 18 SWG GI vertical stiffeners @200 c/c
(iv) 3 mm thick MS pad plates welded inside at required locations for fixing of hardware etc.
(v) Fixing to door frame by 100 mm long SS 304 grade heavy duty ball bearing hinge @600 c/c maximum
(vi) Hardware and vision panel as required.
(vii) Grinding and smoothening of welding, cleaning, finishing (synthetic enamel painting/ polyurethane (PU) coating/ electrostatic powder coating), making true alignments and surfaces etc. all complete.
Notes:
1. Reference shall be made to BANDR/EIL standard nos. 7-75-0070, 7-75-0071
Only the net shutter(s) area shall be measured for payment
-
-
-
Single shutter painted with Electrostatic powder coating with following hardware: (i) Over head hydraulic door closer (heavy duty).
(ii) SS 304 grade 16 mm dia 250mm long aldrop on both sides of shutter.
(iii) Spring loaded heavy duty door stopper
(iv) SS 304 grade 19 mm dia.200 mm long handle on both side of shutter.
(v) 10 mm dia SS 304 tower bolt (250mm long for 2100mm height & 600mm long for 2500mm height)
1
9761
9761
Double shutter painted with Electrostatic powder coating with following hardware: (i) Over head hydraulic door closer (heavy duty).
(ii) SS 304 grade 16 mm dia 300mm long aldrop on both sides of shutter. (iii) Spring loaded heavy duty door stopper.
(iv) SS 304 grade 19 mm dia.200 mm long handle on both side of shutter.
(v) 10 mm dia SS 304 tower bolt ( 250mm long for 2100mm height & 600mm long for 2500mm height)
(vi) 2mm thick 25mmx 25mm GI angles (vertical) welded to each shutter at the meeting point of double shutter.
3
31947
10649
Aluminium work for doors, windows, ventilators and partition Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of BANDR Engineer in Charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
For fixed portion of aluminium doors, windows, ventilators and partitions made from Powder coated aluminium (minimum thickness of powder coating 50 micron)
62
30256
488
For shutters of doors, windows & ventilators made from Powder coated aluminium (minimum thickness of powder coating 50 micron) including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
120
67440
562
Providing and fixing 12 mm thick pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type lI, with decorative lamination on both sides, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of BANDR Engineer in Charge.
1
1805
1805
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and stainless steel cover plate of minimum thickness 1.25 mm with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of BANDR Engineer in Charge.
1
2191
2191
Filling gaps of size upto 5mm depth and 5 mm width in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of BANDR Engineer in Charge complete
25
1425
57
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
1
464
464
Providing and fixing Powder coated minimum thickness 50 micron aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer in-charge
2
144
72
Providing and fixing 100 mm long aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete
3
978
326
Providing and fixing aluminium tower bolts of size 100mm x 10mm , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete
3
813
271
Providing and fixing toughened glass panes of 6.0 mm thickness in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of BANDR Engineer in Charge. (Cost of aluminium snap beading shall be paid in basic item)
25
33800
1352
P/F pressed steel door and window frames Providing and fixing pressed steel door and window frames of size (assorted size out of) Overall 125mm x 60mm section, of required profile conforming to IS: 4351, made of 16 SWG pressed steel including/ consisting of:
i)3 mm thick MS flat spacers welded to frame @ 500mm c/c and at holdfast locations.
ii)Filling the hollow frame section with concrete. iii)MS angle (20mmx20mmx3mm) horizontal tie member below floor finish.
iv)MS holdfasts (200mmx25mmx6mm) welded to spacers.
v)Fixing to masonry (by grouting the holdfasts with M-15 grade concrete in minimum 250mm x 100mm x 100mm sized hole)/ fixing to RCC (by minimum 100mm long, 12 mm dia metallic counter sunk anchor fasteners) vi)MS pad plates (40mm x 150mm x 3mm) & GI mortar guard welded to frame at hinge and other hardware locations.
vii)Metering of joints between horizontal and vertical members, grinding and smoothening of welding, cleaning of frame surface, finishing (synthetic enamel painting/ electrostatic powder coating/ polyurethane (PU) coating), making true alignments and surfaces etc. all complete.
Notes:
1)Reference shall be made to BANDR/EIL standard nos. 7-75- 0070, 7-75-0071
2)Cumulative length of all horizontal and vertical frame members shall be measured for payment.
-
-
-
Frames painted with Electrostatic Powder coating.
6
13314
2219
Extra for box type transoms & mullions
1
877
877
P/F Gypsum Board/ Calcium silicate board Partitions Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture¿s specification and direction of BANDR Engineer in Charge all complete.
-
-
-
75 mm overall thickness partition with 12.5 mm thick double skin fire rated board conforming to IS: 2095: part I
6
13314
2219
PLASTERING & POINTING
-
-
-
Providing plain cement plaster in cement mortar (1 cement:4/6 fine sand by volume) on masonry, PCC/ RCC including preperation of base, finishing, curing etc; also including providing 20 gauge chicken wire mesh stretched tight at all RCC/ PCC and masonry meeting points in 300mm wide strips (150mm on on each surface) fixed with G.I. "U" type nails before plastering.
-
-
-
Ordinary plain cement plaster Average 18mm thick 1:6 (1 cement : 6 sand). Cement supplied by the Contractor at their cost.
5
1530
306
Ordinary plain cement plaster Average 15mm thick 1:4 (1 cement : 4 sand). Cement supplied by the Contractor at their cost.
90
27540
306
Ordinary plain cement plaster Average 12mm thick 1:4 (1 cement : 4 sand). Cement supplied by the Contractor at their cost.
210
59850
285
Ordinary plain cement plaster Average 6 mm thick 1:4 (1 cement : 4 sand). Cement supplied by the Contractor at their cost.
250
60750
243
Plain cement plaster with waterproofing compound conforming to IS-2645 (CICO/ approved equivalent) mixed to cement mortar @ 3% by weight, Average 18mm thick 1:6 (1 cement : 6 sand) Cement supplied by the Contractor at their cost.
120
38880
324
Providing average 20mm thick sand face plaster of uniforms texture in two layers consisting of average 13mm thick cement plaster under layer (1 cement : 4 coarse sand by volume) and average 7mm thick top layer of cement plaster (1 cement : 2 coarse sand by volume, sand granules of 2mm to 4mm)including preparation of base surface, sponge finishing, curing etc. all complete.
-
-
-
Cement supplied by the Contractor at their cost.
3
1659
553
Providing 20mm x 10mm Grooves in plastering in perfect straight line, plumb and uniform size throughout including finishing etc. all complete.
80
4560
57
Providing a floating coat of neat cement @2.75Kg per Sq.M of area over plaster including preparation of surface,finishing,curing etc. all complete.
-
-
-
Cement supplied by the Contractor at their cost..
4
400
100
ROOFING TREATMENT
-
-
-
PCC 1:2:4 over concrete surfaces Providing and laying cement concrete (1 cement : 2 coarse sand : 4 aggregate) over concrete surfaces, laid to slope at all heights including, finishing, curing, tamping etc. all
-
-
-
Cement supplied by the Contractor at their cost.
8
53248
6656
Cinder Concrete (1:10) Providing and laying Cinder Concrete (1 cement : 10 cinder of 48mm size and down grade) in all sunk areas finished with 12mm thick plain cement plaster (1 cement : 6 coarse sand by volume) including consolidating, finishing, curing, maintaining slope etc. all complete.
-
-
-
Cement supplied by the contractor at their cost
1
6709
6709
P/L A.P.P. modified reinforced bituminous memb. waterproofing Providing and laying 4mm thick A.P.P (atactic polypropelene) modified reinforced bituminous waterproofing membrane over terrace and parapet including cleaning and preperation of the surface consisting of making good all the cracks and damages, filling potholes/ depressions, removing weak foam concrete/ plaster and refilling with same wherever required thus preparing smooth surface of the terrace; providing and applying one coat of cold applied bitumen based primer @ 0.2 to 0.4 litre per sq. mtr.; laying the membrane by torch welding over primer, providing 100mm overlaps and appropriately pressing the membrane to remove any entrapped air, including fixing on parapet after providing 10mm x 20mm continuous groove in parapet for terminating the membrane and filling the groove with polyurethane sealant and continuing this treatment at rain water outlet points; providing finishing protective layer of 35 mm thk. P.C.C. (1:2:4) in panels of maximum size 1200mm x 1200mm chequered finish with 24 SWG chicken wiremesh interposed in between finished smooth with joints between panels sealed with suitable polyurethane sealant; providing fillets of 75 mm radius with P.C.C. (1:2:4) at junctions of horizontal and vertical surfaces finished smooth; providing 450mm x 450mm khuras (rain water collecting pits) in 1:2:4 cement concrete at all outlets, levelled down by min. 25mm, finishing, curing etc. all complete as per approved manufacturer's standard specifications and recommendations.
-
-
-
Cement supplied by the contractor at their cost
113
131984
1168
WHITEWASHING, PAINTING & POLISHING
-
-
-
Providing and applying two or more coats (to give a smooth and even shade) of premium plastic emulsion paint conforming to IS:5411 of approved make and shade including cleaning and preparation of surface consisting of application of Plaster of Paris punning over entire surface, filling all holes and depressions with plaster of Paris, applying a coat of cement primer, two or more coats of oil based putty (as per manufacturer's recommendations to give a paste like putty), sandpapering etc. all complete.
320
103680
324
Providing and applying two coats of distempering of approved quality and shade including cleaning and preparation of surfaces etc. all complete.
-
-
-
Oil bound distempering conforming to IS : 428 including preparation of surfaces (making good of uneven plaster with plaster of paris mixed with water, sand papering), providing a priming coat of alkali resistant/ distemper primer.
90
23130
257
Providing and applying two coats of synthetic enamel paint of approved make and shade to give an even shade including cleaning and preparation of surfaces, providing 2 coats of primer, stopping and filling etc. complete.
5
985
197
Providing and applying textured wall coating system consisting of twin pack fine grade silica granules/ dry flakes made of special grade of china clay/ granite type flakes of `Heritage' or equivalent in approved shade and texture; mixed in-situ with 100% acrylic polymer bonding agent; applied over plastered surfaces; the granules/ flakes etc., bonding material, mixing, method of application surface preperation etc. all shall be as per manufacturer's recommendations and specifications.
-
-
-
Providing and applying textured granular type wall coating.
15
9315
621
Providing and applying textured flakes type wall coating.
15
13980
932
Providing and applying min 2 mm thick white cement and polymer based wall putty (JK Wall care/ Birla Putty/ SARA or approved equivalent) over plastered surfaces (masonry wall/ RCC) and smoothening the surface with sand paper etc., preparation of surface etc. all complete as per the approved manufacturer's recommendations and directions of BANDR Engineer in Charge.
70
12740
182
Providing and applying/ finishing the walls/ RCC surfaces with Premium Acrylic smooth exterior paint with silicon additives with low VOC (Volatile Organic Compound) content (Snowcryl-XT of 'Snowcem India Ltd. or approved equivalent) of required shades on new work applied in two or more coats at the rate of 1.43 ltr/ 10 sq.m over and including base coat of waterproof cement paint (of Snowcem Plus or approved equivalent) including cleaning, preparation of surfaces, curing etc. all complete.
170
50660
298
ROOFING
-
-
-
Providing and fixing rain water pipes with M.S. holder clamps including fixing/embedding into masonry/concrete, providing connections like shoes, vents, specials, bends etc. fixing in perfect plumb etc. all complete.
-
-
-
160mm dia O.D. Size. exposed PVC rain water pipe jointed with bonding solution of approved quality and make with pressure rating of 4kg/cm2 including clamps, connections etc. all as per approved manufacturer's details.
1
833
833
160mm dia O.D. Size. embedded PVC rain water pipe jointed with bonding solution of approved quality and make with pressure rating of 4kg/cm2 including clamps, connections etc. all as per approved manufacturer's details
10
8600
860
SANITARY FITTINGS & FIXTURES
-
-
-
Providing and fixing white glazed Earthenware Orissa pan type water closet with integral footrest of 550mmx440mm size conforming to IS : 2556, Part - III including glazed earthenware flushing cistern supported on MS brackets conforming to IS:774 of 10 litre capacity with CP brass handles,32mm dia telescopic flush pipe with fittings & clamps,15 mm dia overflow pipe with mosquitoproof net,15mm dia PVC connection pipe 450mm long,painting of all exposed metalic surfaces with 2 coats of approved shade and quality synthetic enamel paint (ICI or approved equivalent) over a priming coat of approved qualityred oxide zinc chromate, cutting walls, floors and making good of same,finishing, soldered joints, making inlet/ outlet connections,providing min. 150mm thick sand cushion, finishing etc. all complete.
1
6099
6099
Providing and fixing white glazed Earthen ware double trap, syphonic pattern wash down water closet conforming to IS : 2556 Part II including white plastic solid seat and cover conforming to IS : 2548, CP brass hinges and rubber buffers,10 litres capacity glazed Earthenware low level cistern conforming to IS:774 with internal overflow system & fittings,CP brass 40mm dia flush pipe,15 mm dia ,450mm long PVC connection pipe,ball valve, painting of all exposed matalic surfaces with 2 coats of approved shade and quality synthetic enamel paint (ICI or approved equivalent) over a priming coat of approved quality red oxide zinc chromate, cutting walls, floors and making good of same, making inlet and outlet connections, finishing etc. all complete.
1
6577
6577
Providing and fixing white glazed ceramic, flat back half stall type Urinals of 610mm x 400mm x 380mm size conforming to IS:2556 Part-VI including automatic glazed Earthenware cistern for every one 15mm dia CP brass cistern outlet 750mm long,32mm dia GI waste pipe with brass union,CP brass bottle trap,CP brass spreader,tee,distribution pipe etc.,MS brackets for cistern, painting of all exposed mettalic surface with 2 coats of approved shade and quality synthetic enamel paint (ICI or approved equivalent) over a priming coat of approved quality red oxide zinc chromate, making inlet and outlet connections, fixing with C.P. brass screws, finishing etc. all complete.
-
-
-
One urinal.(with 5 litre capacity cistern)
1
9752
9752
Set of 2 urinals.(with 10 litre capacity cistern)
1
17744
17744
Marble Partition
-
-
-
Providing and fixing minimum 17mm thick, marble partitions (approved quality & shade) with round edges for urinals including cutting walls, inserting (upto 100mm depth) and fixing the slab with Cement Mortar (1 cement : 3 coarse sand by volume). fixing with M.S. channels at bottom, suitably embedded in wall with grouting, painting all exposed metallic surfaces with 2 coats of approved shade and quality synthetic enamel paint (ICI or approved equivalent) over an approved quality priming of red oxide zinc chromate, making good of all damaged work,finishing etc. all complete.
1
2631
2631
Providing and fixing glazed Earthenware Hand Wash Basin with antisplash rims on 3 sides, of 550mm x 400mm size conforming to IS : 2556 Part-IV, including approved M.S./C.I. brackets conforming to IS : 775, one 15mm dia CP brass pillar cock, rubber plug with CP brass chain,32mm CP Waste fitting of standard pattern pipe with 32mm dia GI pipe, C.P. brass bottle trap, cutting walls, floors and making good the same, painting all exposed metallic surfaces with 2 coats of approved shade and quality synthetic enamel paint (ICI or approved equivalent) over an approved quality priming coat of red oxide zinc chromate making all connections, finishing etc. all complete.
-
-
-
Providing Handwash basin of white glazed earthen-ware.
1
2806
2806
Providing Hand wash basin of approved colour earthenware of approved shape ( Oval etc. ) with pedestal.
1
3069
3069
Glass Shelf
-
-
-
Providing and fixing 600mm x 120mm x 4mm thick Glass shelf of approved quality with CP brass bracket and guard rails including fixing to wall with wooden cleats and CP brass screws, cutting walls and making good the same, finishing etc.all complete.
1
1052
1052
Towel Rail
-
-
-
Providing and fixing approved quality chromium plated brass towel rail of 20mm dia, 600mm length and 1.25mm thickness including fixing to wall with wooden cleats and CP brass screws, cutting walls and making good the same, finishing etc. all complete.
1
1052
1052
Soap Container
-
-
-
Providing and fixing approved quality chromium plated liquid soap container including fixing to wall with wooden cleats and CP brass screws, cutting walls and making good the same,finishing etc. all complete.
1
658
658
Providing and fixing Heavy grade Bib cocks/ stop cocks of spring loaded self closing type conforming to IS : 781 including making connections, cutting walls and making good the same etc. all complete.
-
-
-
15mm dia CP Brass stop cock.
1
658
658
15mm dia CP Brass bib cock.
1
833
833
Glazed Half round Channel
-
-
-
Providing and fixing white glazed half round channel of 100mm dia in slope with white cement slurry, finishing etc.all complete.
1
176
176
Providing and fixing CP brass shower rose conforming to IS-2064:
-
-
-
100mm dia shower rose.
1
1394
1394
Toilet Paper Holder
-
-
-
Providing and fixing CP Brass Toilet paper holder of approved make with CP brass brackets including fixing to wall with wooden cleats, CP brass screws,cutting walls and making good the same, finishing etc. all complete.
1
833
833
Providing and fixing in position round/ oval shaped counter Hand Wash Basin with anti-splash rims, conforming to IS:2556 Part IV, to fit in exactly and neatly in the cutout in the marble/ granite stone finished R.C.C counter; one 15mm dia CP brass pillar cock, rubber plug with C.P. brass chain, 32mm C.P. waste fitting of standard pattern type with 32mm dia G.I. pipe, C.P. brass bottle trap, cutting walls, counter etc. and making good the same, also including providing cut out in marble/ granite slab counter top (and R.C.C underneath) of exact size and shape for wash basin to fit in neatly and perfectly; making all connections, finishing etc. all complete. (Marble/ Granite counter top shall be paid seperately under relevant item of `Floor Finishing')
-
-
-
Providing round/ oval shaped counter Wash Basin of glazed chinaware in approved colour.
1
9761
9761
Stainless steel Kitchen/ Laboratory sink
-
-
-
Providing and fixing stainless steel Kitchen/ Laboratory sink of approx. Size 610mm x 450mm x 200mm made of min. 1mm thick stainless steel sheet of `Salem Steel' or equivalent supported on and including M.S. brackets conforming to IS: 775; one 15mm dia C.P brass long body bib cock (if fixed to wall) or swivel type pillar cock (if fixed to counter), 15mm dia PVC/ G.I. connections to floor trap with unions etc.; painting all exposed metallic surfaces with min. 2 coats of synthetic enamel paint of approved make and shade over acoat of red oxide zinc chromate primer; cutting floor, walls, counter etc. and making good the same, making all connections, finishing etc. all complete.
1
9113
9113
17mm thick polished granite stone partitions
-
-
-
Providing and fixing minimum 17mm thick polished granite stone partitions (in approved quality, shade and design/ shape) with round edges for urinals including cutting walls, inserting (up to 100mm depth) and fixing the slab with Cement Mortar (1 cement : 3 coarse sand by volume), making good of all damaged work, finishing etc. all complete
1
4823
4823
round edged mirror of 6mm thick
-
-
-
Providing and fixing round edged mirror of 6mm thick float glass with 6mm thick waterproof marine ply backing and rounded/ beveled edging, fixed on wall with wooden cleats and CP brass screws including cutting walls/ tiles, making good the same, finishing etc. all complete.
1
1754
1754
CP Brass hand shower
-
-
-
Providing and fixing CP Brass hand shower (health Faucet, of Jaquar or approved equivalent ) with 8 mm Dia, 1 metre long PVC Tube and Wall hook in approved colour and finish with all necessary fittings etc. all complete.
1
745
745
chromium plated brass towel ring
-
-
-
Providing and fixing approved quality chromium plated brass towel ring of 150mm dia including fixing to wall with wooden cleats and CP brass screws, cutting walls and making good the same, finishing etc. all complete.
1
833
833
chromium plated brass towel rack
-
-
-
Providing and fixing approved quality chromium plated brass towel rack with towel rail, of 250mm width and 600mm length including fixing to wall with wooden cleats and CP brass screws, cutting walls and making good the same, finishing etc. all complete.
1
1930
1930
chromium plated brass Soap dish
-
-
-
Providing and fixing approved quality chromium plated brass Soap dish of 100mm width and 130mm length including fixing to wall with wooden cleats and CP brass screws, cutting walls and making good the same, finishing etc. all complete.
1
658
658
white glazed Earthen ware double trap, syphonic pattern wall mounted (European type) wc
-
-
-
"Providing and fixing white glazed Earthen ware double trap, syphonic pattern wall mounted (European type) water closet conforming to IS: 2556 Part 16 including white plastic solid seat and cover conforming to IS : 2548, CP brass hinges and rubber buffers, CP brass 40mm dia flush pipe,15 mm dia, ball valve, painting of all exposed metalic surfaces with 2 coats of approved shade and quality synthetic enamel paint (ICI or approved equivalent) over a priming coat of approved quality red oxide zinc chromate, cutting walls, floors and making good of same, making inlet and outlet connections, finishing etc. all complete.
1
13311
13311
white glazed ceramic, flat back half stall type Urinals sensor based
-
-
-
"Providing and fixing white glazed ceramic, flat back half stall type Urinals of 610mm x 400mm x 380mm size conforming to IS:2556 Part-VI, having electronic, battery operated sensor based flushing system of approved make and model including 32mm dia GI waste pipe with brass union, CP brass bottle trap, CP brass spreader, tee, distribution pipe etc., painting of all exposed metallic surface with 2 coats of approved shade and quality synthetic enamel paint (ICI or approved equivalent) over a priming coat of approved quality red oxide zinc chromate, making inlet and outlet connections, fixing with C.P. brass screws, finishing etc. all complete.
1
15973
15973
C.P. brass 2 way bib cock quarter turn type for health faucet
-
-
-
Providing, fixing, testing and commissioning C.P. brass 2 way bib cock quarter turn type for health faucet of following make or approved equivalent 15 mm nominal bore, all complete as per standard design, specifications and direction of BANDR Engineer in Charge.
1
1096
1096
C.P. brass wall mount Lavatory faucet mixer for wash basin
-
-
-
Providing, fixing, testing and commissioning C.P. brass wall mount Lavatory faucet mixer for wash basin of following make or approved equivalent 15 mm nominal bore, all complete as per standard design, specifications and direction of BANDR Engineer in Charge.
1
1841
1841
Glass shelf
-
-
-
"Providing and fixing 600mm x 120mm x 6mm thick Glass shelf of approved
quality with 'D' or 'F' bracket (Stainless Steel 202 grade) and guard rails including fixing to wall with plastic rawl plugs and SS screws, drilling walls and making good the same, finishing etc., all complete.
1
1096
1096
Providing and Fixing Concealed Flushing Cistern Size 550X95X500mm with dual flush Actuator, flush-stop function, noise less float valve and fast filling action with all component parts of high quality complete including frame for concealed cistern etc. all complete as per the instructions of the engineer-incharge.
1
4823
4823
Providing and Fixing of Flushing plate with dual knobs chrome Finish in desired shape and size for Concealed Flushing Cistern including all tools, tackles etc., all complete as per the instructions of BANDR Engineer in Charge.
1
1359
1359
FALSE CEILING, FALSE FLOORING, UNDERDECK INSULATION, PARTITIONING
-
-
-
Tray type Aluminium plank false ceiling
-
-
-
Providing and fixing Tray type Aluminium plank false ceiling consisting of 254/305mm x 1264mm or 600mm x 600mm size Aluminium planks (profiled for positive engagement into clip-in profiles and demounting of individual planks) manufactured out of 0.7mm thk. Aluminium alloy 3105/3005/5052 (as per ASTM 209M) with stove enamelled (coil coated) finish in approved colour and suspension system consisting of 0.5mm thk. 40mm x 20mm galvanised steel clip-in main runner profiles (@ 1264mm or 600mm as per plank size) supported by and including 0.5mm thk. 25mm x 16mm GI suspension angle,1mm thk. 25mm x 34mm x 76mm CRCA zinc plated steel ceiling brackets (@ max. 1264mm c/c or 600mm as per profile) fixed to roof slab/beam,0.5mm thk. 40mm wide, 105mm high G.I. hold on clamps slotted for level adjustment, perimeter angles including providing slit openings for fixing supply/return air grill, lighting fixtures, AC ducts etc. all complete.
30
142500
4750
underdeck insulation consisting of rigid Polyisocyanurate foam (PIR) slabs
-
-
-
Providing and fixing in position underdeck insulation consisting of rigid Polyisocyanurate foam (PIR) slabs of size 1000 x 500mm and thickness of 30mm (covered on one side with glass fibre tissue/ Aluminium foil having 50mm overlap) conforming to IS:12436 having density not less than 32 kg./ Cu. M., thermal conductivity (K- value) not more than 0.023 w/mk measured at 10 deg. C; classified as 'Class I' for surface spread of flame as per BS 476, part 7; fixed to R.C.C. slab by hot blow grade bitumen of 85/25 grade or cold adhesive CPRX applied over a coat of bituminous primer @ 0.5 Litres/ Sq.M. applied to bare R.C.C. surface and to the two surface of each PIR panel and pressed in position (while the bitumen is still tacky) with the help of G.I. screws (No. 8 x 75mm long) fixed into rawl plugs (holes in R.C.C. for the rawl plugs shall be drilled prior to applying coat of bituminous primer) of size 8 x 25mm inserted (5 nos. for each slab- One each at 4 corners and one at center) and G.I washers 25mm dia; including covering the overlaps with approved quality sealing compound (MAS-94 or equivalent); chicken wire mesh 24G x 19mm shall then be fixed to G.I screws and tightened with lacing wire; including preparation of surface consisting of cleaning R.C.C surface of all dust, dirt and loose particles by wire brushing; etc. all complete as per approved manufacturer's standard specifications and recommendations.
63
77490
1230
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recomme-nded jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer¿s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the BANDR Engineer in Charge but excluding the cost of painting with:
-
-
-
12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I
35
59010
1686
12.5 mm thick tapered edge gypsum moisture resistant board
8
9584
1198
Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main ¿T¿ runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross ¿T¿ of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main ¿T¿ at 600 mm center to center to form a grid of 1200x600 mm and secondary cross ¿T¿ of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main ¿T¿ runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by BANDR Engineer in Charge.
-
-
-
12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.
28
44996
1607
MISCELLANEOUS ITEMS
-
-
-
Providing and laying plinth protection around the building perimeter consisting of a layer of 150mm thick compacted sand and 100mm thick M-15 grade concrete top layer laid to slope including trowel finishing the top layer, finishing, curing including excavation, disposal of Earth work, etc. all complete.
-
-
-
Cement supplied by the Contractor at their cost.
15
14925
995
Providing and laying plinth protection with Bldg. drain as per BANDR/EIL STD. No. 7-75-0065 consisting of
-
-
-
Plinth protection of PCC (1:3:6) laid over rammed earth to slope and trowel finished. Cement supplied by the Contractor at their cost.
15
8685
579
Building drain consisting of brick work, PCC (1:3:6) laid over rammed earth and finished with 15mm thick plain cement plaster topped with neat cement finish @ 2.75kg. of cement per Sq.M of area including finishing curing etc. all complete. Cement supplied by the Contractor at their cost.
15
17970
1198
Extra for providing 600mm long MS grating drain cover as per EIL STD No. 7-75-0065 made of 40mm x 6mm M.S. flat framework with 40mm x 6mm MS flats welded @ 35mm c/c including providing & fixing 50mm x 50mm x 6mm M.S. angle frame fixed to concrete portion of the drain.
25
44375
1775
50mm dia GI pipe spouts
-
-
-
Providing and fixing in position 50mm dia GI pipe spouts to slope for drainage of canopy, chajja etc., including puncturing the masonry /RCC and grouting with M-15 grade concrete, finishing etc. all complete.
0.3
328
1096
Anti-Termite coating
-
-
-
Providing and applying Anti-Termite coating conforming to I.S. 401 coating to all woodwork (panel/frame) with approved quality aldrine- chlorinated phenol compound conforming to I.S. 401 to be applied in 3 or more coats (covering capacity-3 sq.m per coat) as required before finishing of the surface if any (viz.painting lamination etc.) all complete.
3
738
246
Providing and fixing hand railing up to 1000mm high above finished floor level over stair and landing consisting of one 25mm square M.S. baluster embedded or fixed to floor/steps by 6mm thk. x 20mm wide M.S. clamps anchored into floor/ steps in floor and each step grouted with M-15 grade concrete in cut out of 50mm x 50mm x 100mm size block, teakwood moulded/ M.S. pipe handrail fixed on baluster, 40mm x 40mm x 6mm M.S. flat shoe welded at the bottom of baluster, including painting the balusters, M.S. surfaces with double coating of approved shade and make synthetic enamel paint over a coat of approved quality red oxide zinc chromate primer coat, finishing etc. all complete. (Only length of top handrail shall be considered for payment, not the cumulative length of individual members).
-
-
-
32 mm dia N.B. (medium) M.S. pipe handrail welded to baluster and painted with double coating of synthetic enamel paint over priming coat as per BANDR/EIL STD NO. 7-75-0036.
5
9985
1997
1000 mm high satin finish stainless steel (SS 304 grade) tubular railing
-
-
-
Supplying, assembling and installing 1000 mm high satin finish stainless steel (SS 304 grade) tubular railing of approved design in staircases, ramps, around floor cut outs etc. consisting of:
1. 50mm dia SS pipe top handrail
2. 32 mm dia SS pipe balusters (at every third step for staircase, @ maximum 1200mm c/c for ramp, floor cutouts)
3. 3 nos minimum 18mm dia SS pipe intermediate handrails.
Including:
1. Fixing balusters to floor with 4 nos bolts änd 8mm thick, 100mm dia SS base plate & SS cap/collar.
2. Fixing top handrail to the balusters with 12mm dia SS bar connector & 6mm thick SS saddle plate.
3. Fixing intermediate handrails to the balusters with 12mm dia SS bar connector.
4. All end caps, decorative caps over balustrades,necessary bending, welding, polishing of all welded joints (Length of top handrail shall be measured for payment).
3
15309
5103
Steel Entrance Gates
-
-
-
Providing and fixing in position Steel Entrance Gates consisting of 40mm x 80mm x 3.2mm M.S. tubular frame, 80mm x 40mm x 3.2mm rectangular M.S. hollow sections & 32x32x2.6 mm MS rectangular hollow sections, both horizontal & vertical members welded to the framework and intermediate curved rectangular hollow section as per standard design, locking arrangement, 25mm thick, 75mm dia M.S. wheel with ball bearing including fixing the gate to RCC/ masonry by M.S. hinge arrangement (fabricated/ machined as per detail) and M.S. hold fast (25 x 6 x 200mm long) grouted with M-20 grade concrete, providing and fixing M.S. pivot, 50mm x 50mm x 6mm M.S. Tee bent to shape and embedded in road surface for gate opening track, gate stopper, painting the gate with approved shade and quality synthetic enamel paint (two coats) and a coat of approved quality primer, ensuring smooth operation of the gate etc. all complete as per BANDR/EIL- STD-No. 7-75-0054.
3
23961
7987
SUN CONTROL FILM:
(P/F of Energy saving sun control window film, having thickness 1.5mil/2mil & shall
allow visible light transmission of 45%. . The Protection film shall have properties that
Blocks UV Rays(1%), Cuts Glare(51%), Conserves Energy, Provides Clearer Vision at Night) of approved quality
7
3374
482
ALUMINIUM LOUVERS:
Providing & fixing Louvered portion of Aluminium windows/ ventilators made of heavy
duty louvers of Aluminium sections (of approved quality) with similar finishing of
windows/ ventilators.
3
9318
3106
LANDSCAPE CIVIL WORKS
-
-
-
FINISHES FOR ROAD & PARKING AREA
-
-
-
Providing and laying of approved INTERLOCK PAVERS (rough finish with solar reflectance index value higher than 0.5, size 100x200x80mm or as/ design) in road and parking area bands, laid over 100mm thick sand base over well compacted subbase/ WBM and mortar with joints filled in fine sand as per manufactured requirements etc. all complete.
8
6808
851
Supplying and laying CONCRETE INTERLOCKED GRASS PAVERS laid over 100mm thk. sand base over well compacted subbase/ WBM and mortar with joints filled in fine sand as per manufactured requirements etc. all complete.
8
8184
1023
FINISHES FOR PEDESTRIAN PATHWAY
-
-
-
Providing and laying approved GRANITE STONE (shotblasted & polished finish, 40mm thk., Size 100x100, 150x150, 150x300, 300x300, 275x275, 275x550, 550x550mm or as/ design) used in pathways, laid over 100mm thk. PCC base & well compacted sub base as per approved paving pattern including rubbing, polishing and grout etc. all complete.
8
34432
4304
CLADDING AND COPING
-
-
-
Providing and fixing approved GRANITE STONE in cladding & coping (shotblasted, polished & honed finish, 20mm thk.) fixed with approved low VOC content adhesive including rubbing, polishing and grout (to match color of stone) etc. all complete.
1
4341
4341
Providing and fixing approved KOTA STONE in cladding & coping (shotblasted, polished & honed finish, 20mm thk.) fixed with approved low VOC content adhesive including rubbing, polishing and grout (to match color of stone) etc. all complete.
1
1193
1193
MISCELLANEOUS FINISHES
-
-
-
Providing and applying approved EPOXY PAINT of required shade on steel work (two or more coats) as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. all complete.
1
263
263
LANDSCAPE HORTICULTURE WORKS
-
-
-
SITE PREPARATION Uprooting rank vegetation and weeds by digging the area to a max. depth of 60cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish & other disposal, stone etc. with all leads and lifts taking out the disposal rubbish / materials from the site as directed by BANDR Engineer in Charge, due earth to be sieved as directed through 6/10mm sieve and shall be reduced in lawn area, all complete.
10
7800
780
SWEET EARTH Supplying, stacking, filling/ spreading of SWEET EARTH free from stone, rubbish etc. including royalty and carriage with all leads (earth measured in stacks will be reduced by 20% for payment), all complete.
3
3948
1316
SAND FILL Supplying & stacking of FINE SAND from river bed & spreading in the area as per direction of BANDR Engineer in Charge, including royalty & carriage with all leads etc. all complete.
5
9275
1855
GRASS AREA Grassing with ?Doob? grass including transplanting the GRASS with 75 mm spacing on either side, watering and maintenance of the lawn as required (during initial development of 15 days or more, watering is to be done every day) till the grass forms a thick lawn free from weeds and fit for mowing, including ground preparation consisting of supplying and mixing earth and manure in proportion 8:1 along with Urea, N.P.K. mixed in proportion as per the suppliers specifications and spreading to a thickness of 200mm, Flooding the area with water including making kiaries and dismantling the same, weeding after 10 to 15 days & then fine dressing the ground to levels as specified in the drawings, including watering and maintenance of the lawn as required etc. for a period of one year after planting, all complete.
10
6230
623
TREE PLANTING Providing & transplanting best quality healthy TREES species [Acacia nilotica (Babul), Alstonia scholaris (Devil's tree), Anogeissus latifolia (Axle wood), Artocarpus integrifolia (Jack fruit), Azadirachta indica (Neem), Bauhinia purpurea (Orchid tree), Bombax malabaricum (Semal), Butea frondosa (Flame of the forest/ Palash), Callistemon lanceolatus (Bottle brush), Cassia fistula (Amaltas), Cassia siamea, Chorisia speciosa (Silk cotton tree), Dalbergia sisso (Sheesham), Delonix regia (Gulmohur), Dendrocalamus strictus (Bamboo), Emblica officinalis (Aonla), Eugenia jambolana (Jamun), Ficus benjamina, Ficus elastica (Rubber), Ficus glomerata, Ficus religiosa (Peepal), Holorrhaena antidysenterica, Lagerstroemia flos reginae, Madhuca indica (Mahua), Mangifera indica (Mango), Melia azardirachta, Morus indica (Mulberry), Ocimum americanum, Plumeria obtusa, Pterospermum acerifolium (Kanak champa), Samanea saman (Rain tree), Saraca indica (Sita ashok), Shorea robusta (Sal), Tamarindus indica (Tamarind), Tectona grandis (Teak), Terminalia arjuna, Terminalia chibula, Terminalia bellarica, Ziziphus jujuba (Ber) or any other native/ drought tolerant species or as per the owner?s choice] of approx. height 2500mm (obtained from renowned nursery) in erect position and supported with bamboo stick without breaking the earth balls around the roots, packing the soil tight around the plant and water properly, including digging the tree pits (holes 1200 mm dia., 1200 mm deep) prior to planting and refilling the same with sweet earth mixed with manure 2 :1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) along with Urea, N.P.K. mixed in proportion as per suppliers specifications, flooding with water, dressing including removal of rubbish and surplus earth if any with all leads and lifts etc, all complete, All trees to be approved before planting inclusive of maintenance as specified for one year after planting including rectification/ replacement of any damaged work or plant, watering at required frequency, providing and laying manure as required etc. all complete.
2
10648
5324
SHRUBS AND HEDGES PLANTING Providing and transplanting best quality SHRUBS AND HEDGES species [Allamanda schotii, Bauhinia tomentosa, Caesalpinia pulcherrima, Calliandra haematocephala, Cassia biflora, Cestrum diurnum, Clerodendron inerme, Cyprus rotundus, Duranta goldii, Duranta variegated, Ficus blakei, Ficus panda, Ficus nuda, Ficus reginold, Ficus starlite, Gardenia jasminoides, Hamelia patens dwarf, Heliconia spp., Hibiscus rosa sinensis, Hibiscus variegated, Ixora chinensis, Ixora singaporensis, Jatropha panduraefolia, Jasminum spp., Melaleuca bracteates, Murraya exotica (mock orange), Nerium oleander alba, Nerium oleander roseum, Nerium oleander dwarf, Plumbago capensis, Spider lily, Strelitzia regia, Tabernaemontana coronaria 'dwarf', Tabernaemontana coronaria variegated, Tecoma capensis (Capehoney suckle), Tecoma gaudichaudi, Tecoma stans, Thevetia nerifolia, Thuja spp., Vinca rosea, Vinca rosea alba, Yucca gloriosa or any other native/ drought tolerant species or as per the owner?s choice] of approx. height 450-900mm in erect position without breaking the earth balls around the roots, packing the soil tight around the plant and water properly, including preparation of beds for hedging and shrubbery by excavating 600 x 600mm deep, pits dug a few days in advance, top soil with manure (compost) 2 :1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) along with Urea, N.P.K. mixed in proportion as per the suppliers specifications, flooding with water, dressing including removal of rubbish and surplus earth if any with all leads and lifts etc, all complete. All shrubs to be approved before planting inclusive of maintenance as specified for one year after planting including rectification/ replacement of any damaged work or plant, watering at required frequency, providing and laying manure as required etc. all complete.
5
4605
921
GROUNDCOVER PLANTING Planting best quality pot-grown healthy GROUNDCOVER species [Alternanthera green, Alternanthera red, Alternanthera variegated, Asparagus myeri (plume asparagus), Asparagus sprengeri, Chlorophytum comosum, Cyperus alternifolia, Dianella tasmanica, Ficus longisland, Ficus pumila, Fountain grass, Iresine herbstii, Lantana camara red, Lantana camara variegated, Lantana camara white, Lantana camara yellow, Lantana sellowiana, Ophiopogon jaburan, Ophiopogon jaburan variegated, Portulaca grandiflora, Rhoeo discolor, Red fountain grass, Setcreasa spp.Strelitzia regia, Syngonium butterfly, Verbena spp., Wedelia trilobata (creeping daisy) Zebrina pendula or any other native/ drought tolerant species or as per the owner?s choice] of approx. height 300mm with minimum stem of species in erect position without breaking the earth balls around the roots, packing the soil tight around the plant and water properly, including preparation of beds by excavating 300 x 300 mm deep, pits dug a few days in advance, top soil with manure (compost) 2 :1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) along with Urea, N.P.K. mixed in proportion as per the suppliers specifications flooding with water, dressing including removal of rubbish and surplus earth if any with all leads and lifts etc, all complete. All groundcovers to be approved before planting inclusive of maintenance as specified for one year after planting including rectification/ replacement of any damaged work or plant, watering at required frequency, providing and laying manure as required etc. all complete.
2
876
438
CLIMBER/ VINE & CREEPER PLANTING Planting best quality pot-grown healthy CLIMBER/ VINE/ CREEPERS species [Allamanda catharitica, Bignonia venusta, Bougainvillea spp., Clerodendron splendens, Clerodendron thompsani, Duranta repens gold, Duranta repens variegate, Ficus repens, Jacquemontia violacea, Jasminum nitidum, Passiflora caerulea, Quisqualis indica, Rhyncospermum jasminoides, Vernonia elaengifolia or any other native or drought tolerant species or as per the owner?s choice] of approx. height 450-900 mm in erect position with 300mm to 450mm spacing and minimum stem of species in erect position without breaking the earth balls around the roots, packing the soil tight around the plant and water properly, including preparation of beds by excavating 450 x 450 mm deep, pits dug a few days in advance, top soil with manure (compost) 2 :1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) along with Urea, N.P.K. mixed in proportion as per the suppliers specifications flooding with water, dressing including removal of rubbish and surplus earth if any with all leads and lifts etc, all complete. All climbers to be approved before planting inclusive of maintenance as specified for one year after planting including rectification/ replacement of any damaged work or plant, watering at required frequency, providing and laying manure as required etc. all complete.
1
877
877
ORNAMENTAL PLANTS Planting best quality pot-grown healthy ORNAMENTAL PLANTS species [Agave spp., Bamboo buddha belly, Bismarckia nobilis, Cycas circinallis, Cycus revoluta, Furcarea watsoniana, Golden bamboo, Phoenix roebelenii, Phoenix sylvestris, Sansveira spp., Washingtonia robusta, Wodyetia bifurcata, Roystonea regia (Royal palm) or any other native/ drought tolerant species or as per the owner?s choice] of approx. height 1500-2500mm in erect position with minimum stem of species in erect position without breaking the earth balls around the roots, packing the soil tight around the plant and water properly, including preparation of beds by excavating 1200 x 1200 mm deep, pits dug a few days in advance, top soil with manure (compost) 2 :1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) along with Urea, N.P.K. mixed in proportion as per the suppliers specifications flooding with water, dressing including removal of rubbish and surplus earth if any with all leads and lifts etc, all complete. All plants to be approved before planting inclusive of maintenance as specified for one year after planting including rectification/ replacement of any damaged work or plant, watering at required frequency, providing and laying manure as required etc. all complete.
1
877
877
INDOOR PLANTS Providing, planting/ transplanting in position saplings of INDOOR PLANT species (Areca palm, Cycas revoluta, Phoenix roebellini, Rhapis excelsa, Keveda, Maranta, Bread fruit Wine, Livistonia chinensis, Arokaria, Dracaena, Dracaena variegated, Fern, Ribbon grass, Chlorophytum, Furcarea watsoniana, Lovlina palm or any other as per the owner?s choice) approximate height 450mm to 600mm; (obtained from renowned nursery) of specified species including preparation soil with manure (compost) 2 :1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) along with Urea, N.P.K. mixed in proportion as per the suppliers specifications weathered by watering and drying and then filled in earthen pot, transplanting the saplings in erect position without breaking the earth balls around the roots, packing the soil tight around the plant and water properly. Initial maintenance of plants for a period of one year from the date of formal completion of all works under this contract including rectification/ replacement of any damaged work or plant, watering at required frequency, providing and laying manure as required, all complete.
1
1754
1754
MANURE Supplying & stacking at site and spreading manure of approved quality after screening including carrige with all leads (manure measured in stack will be reduced by 8% for payment) etc. all complete.
1
1754
1754
CLADDING,FACADES ETC.
-
-
-
Providing and fixing in position minimum 25mm thick granite stone (in dry cladding) of uniform colour and size by means of Stainless steel clamps (of Hilti/ approved equivalent make) of minimum weight 250 gms and of minimum 5mm thickness with various offset lengths from 50-65mm and 80-120mm, fastening the clamps with ETA approved universal anchors and pins etc. (of Hilti/ approved equivalent make) for fixing/ anchoring in masonary/ RCC using sufficient number of clamps/ anchors/ pins all as per approved manufacturer's standard details and fixing sequence/ methodology to ensure stable cladding system (with a guarantee for a time span of not less than 15 years) including sealing the joints with polyurethane based adhesive sealant ('SIKAFLEX 11FC of SIKA India Pvt. Ltd' or approved equivalent) and applying one or more coats of Silicon based water repellant coat ('SIKAGUARD 703W of SIKA India Pvt. Ltd' or approved equivalent) on front side of the stone cladding incl. cost of scaffolding etc. complete in all respect for all heights as per the instruction of BANDR Engineer in Charge.
-
-
-
Granite stone dry cladding with clamps of 316 hybrid grade (of Hilti/ approved equivalent make).
5
22185
4437
Designing, engineering, providing and fixing in position fully sealed and air, water and weather tight structural glazing system comprising of framing system (mullions, transoms etc.) made from extruded, powder coated (min. 30 microns in approved colour) aluminium alloy HE9WP (conforming to IS:733) of commercial quality, free from all defects/ impairing appearance especially selected to fulfil the design requirements spelt out in the specifications; machine cut glass infill panels (of size as per the design) made of minimum 6mm thick hard coated (Glaverbel Stopsol or approved equivalent in approved shade) reflective toughened glass, the glazed framing panel formed by means of special structural quality silicone adhesive sealant applied on all four sides (between glazing panel unit and aluminium alloy framing system) and fixed to framing system. The item includes fixing the framing system to the RCC framed structure/ masonry walls by providing and fixing necessary Aluminium brackets (with flexible joints); with other fastening devices like bolts, anchors, etc. (made from Stainless Steel grade 316, rivets and pins of aluminium alloy of appropriate grade as required) self locking type and torque tightening type; also including providing smooth membrane of Teflon (Min. 1.0 mm thickness), providing (at all joints of the framing, glazed panels as well as joints between aluminium frame with concrete and/ or masonry) of adhesive silicon sealant and superior quality approved make EDPM gaskets, cleaning etc. all complete.
15
134670
8978
Providing and erecting/ fixing/ installing in position aluminium composite panels system (for external application) of 'Alucobond'/ 'Eurobond'/ 'Reynobond' or approved equivalent comprising of aluminium framework consisting of 40mm x 40mm x 4mm thick x 100mm long aluminium angle cleats (bracket) suitably spaced and placed to comply to design/ elevation/ colour pattern etc. and fixed to masonry/ RCC column/ beam of the building by means of M8 x 65mm long G.I Anchor bolts, aluminium continuous vertical angle 40mm x 40mm x 4mm fixed/ bolted to angle cleats by means of M8 x 25mm long nut and bolt arrangement, suitable horizontal aluminium angle horizontal members as required; cladding panels 4mm thick (overall thickness) made of high quality extrusion grade LDPE/ LLDPE core material (3mm thick) sandwiched between 0.5mm thick aluminium foil (on either side) made of aluminium alloy 1100-H18 or approved equivalent and finished with minimum 35 micron (5 micron primer and 25 micron top coat) thermoplastic PVDF layer 'Kynar 500' (minimum 70%) and polyester coating in approved shade; all complete including providing approved silicon sealant at all joints, necessary accessories like backing rods, aluminium pop rivets, bolts, screws, corner pieces etc. as required for the completion of the work as per the approved manufacturer's specifications and recommendations, cleaning, finishing etc., all complete.
10
57680
5768
Fire rated Doors/ Windows and Partitions
-
-
-
P/F Fire rated Single glazed door with panic bar Providing and fixing 2 hours fire rated, fully glazed, single shutter doors consisting of steel door frame, shutter including stiles, rails, insulation, transparent glass, sealant and hardware such as hinges, panic bar, locks/ trims for panic bar, door closer, door stopper, concealed flush bolt including fixing with masonry, partition etc. all complete as per Specification and approved Manufacturer's details.
1
50085
50085
P/F Fire rated Double glazed door with panic bar Providing and fixing 2 hours fire rated, fully glazed, double shutter doors consisting of steel door frame, shutter including stiles, rails, insulation, transparent glass, sealant and hardware such as hinges, panic bar, locks/ trims for panic bar, door closer, door stopper, concealed flush bolt including fixing with masonry, partition etc. all complete as per Specification and approved Manufacturer's details.
1
53217
53217
Fire rated Single Steel door with panic bar Providing and fixing 2 hours fire rated, single shutter steel doors consisting of steel door frame, shutter, vision panel, insulation and hardware such as hinges, panic bar, locks/ trims for panic bar, door closer, door stopper, concealed flush bolt etc. including fixing with masonry, partition etc. all complete as per specification and approved Manufacturer's details.
1
14483
14483
Fire rated Double Steel door with panic bar Providing and fixing 2 hours fire rated, double shutter steel doors consisting of steel door frame, shutter, vision panel, insulation and hardware such as hinges, panic bar, locks/ trims for panic bar, door closer, door stopper, concealed flush bolt including fixing with masonry, partition etc. all complete as per specification and approved Manufacturer's details.
1
17615
17615
Fire rated glazed partition Providing and fixing 2 hours fire rated, glazed partition of desired design consisting of steel frame, insulation and transparent glass and glazing beading, matrix mineral boards, intumescent putty, fire resistant acrylic sealant etc. all complete including preparing fabrication/ installation drawings including fixing with masonry, partition etc. all complete as per specification and approved Manufacturer's details.
3
120993
40331
CIVIL, STRUCTURE AND ARCHITECTURE
-
-
-
STRUCTURAL
-
-
-
EARTH WORK (REFER SPECIFICATION NO. 6-68-0003)
-
-
-
Earthwork excavation in soil
-
-
-
Earth work in EXCAVATION below ground level for all kinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK as classified in specification for a depth upto 1.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting.
4500
810000
180
Earth work in EXCAVATION below ground level for all kinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK as classified in specification for a depth beyond 1.5m and upto and inclusive of 3.0m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting.
1500
322500
215
Earth work in EXCAVATION below ground level for all kinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK as classified in specification for a depth beyond 3.0m and upto & inclusive of 4.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting.
400
125600
314
SHORING AND STRUTTING
-
-
-
Providing and installing approved type of "SHORING AND STRUTTING" by open timbering method for all depths to retain earth including dismantling and removal of the same etc. from site after completion of work etc. all complete as directed.
80
28400
355
Backfilling after execution of work
-
-
-
BACKFILLING after execution of the WORK to proper grade and level with selected materials from available excavated soil from spoil heaps within a LEAD OF 100M, including re- excavating the deposited soil excavated earlier, breaking clods, laying at all depths and heights in layers of thickness not exceeding 15 Cms. watering, rolling and ramming by manual methods/ mechanical compactors to achieve 90% laboratory maximum dry density, dressing, trimming etc. in foundations, plinths, trenches, pits etc. all complete.
2000
324000
162
BACKFILLING after execution of the WORK to proper grade and level with selected materials from available excavated soil from spoil heaps beyond a LEAD OF 100M AND UPTO & INCLUSIVE OF 500M including re-excavating the deposited soil excavated earlier, breaking clods, laying at all depths and heights in layers of thickness not exceeding 15 Cms. watering, rolling and ramming by manual methods/mechanical compactors to achieve 90% laboratory maximum dry density, dressing, trimming etc. in foundations, plinths, trenches, pits etc. all complete.
50
11100
222
Earthwork Filling by excavation
-
-
-
EARTHWORK IN FILLING by excavating the earth from BORROW AREAS arranged by CONTRACTOR for all leads, transporting the earth from borrow area including cleaning & stripping the earth at borrow areas, breaking clods, loading, unloading and laying at all depths and heights in layers of thickness not exceeding 15 cms., watering, rolling and ramming by manual methods/mechanical compactors to achieve 90% of the maximum laboratory dry density, dressing, trimming, levelling the top surface etc. in foundations, plinths, trenches etc. all complete.
10
5270
527
Transporting & Disposing the SURPLUS EARTH AND DEBRIS
-
-
-
Transporting and disposing the SURPLUS EARTH AND DEBRIS including shrubs and vegetations from construction area beyond the initial LEAD OF 100M AND UPTO 1KM including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. For carting on the basis of truck measurements (volume of truck reduced by 30% for voids).
1200
216000
180
"Transporting and disposing the SURPLUS EARTH AND DEBRIS including shrubs and vegetations from construction areas to areas ANYWHERE OUTSIDE THE PLANT BOUNDARY, including re-excavating the deposited soil excavated earlier, loading, transportation, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. For carting on the basis of truck measurements (volume of truck reduced by 30% for voids). DISPOSAL AREAS OUTSIDE PLANT BOUNDARY TO BE ARRANGED BY THE CONTRACTOR. Royalty as applicable for disposal outside plant limits to be borne by the Contractor.
"
1500
336000
224
PLAIN & REINFORCED CEMENT CONCRETE: (REFER SPECIFICATION NO. 6-68-0004)
-
-
-
PCC - Non FIM Items
-
-
-
Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations, drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix 1:5:10 by mass (1 Cement: 5 Coarse Sand: 10 Crushed Stone Aggregates/Gravels) with 40mm and down size graded crushed stone aggregates/Gravels. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.
180
870300
4835
Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations, drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing, etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete grade M15 with 20mm and down size graded crushed stone aggregates/Gravels. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.
0.25
1480
5921
Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations, drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing, etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete grade M20 with 20mm and down size graded crushed stone aggregates/Gravels. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.
90
545580
6062
RCC Substrutures - Non FIM Items
-
-
-
Providing and laying REINFORCED CEMENT CONCRETE OF M-20 GRADE with 20 mm and down size graded crushed stone aggregates/ gravel in SUB-STRUCTURE e.g. foundations, raft, beams, slabs, pile caps, retaining walls, dyke walls, jambs, counterforts, buttresses, pedestals, pipe sleepers, columns, suspended floors, staircases, landings, steps, brackets etc., including equipment/ machine foundations & pedestals viz. compressors, ID & FD fans, pumps, generators, crushers, mills, etc., (including single pour concreting as specified on the drawing), applying cement wash on concrete surface (wherever no other surface application is specified), providing pockets, openings, recesses, chamfering, etc., wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. (EXCLUDING THE COST OF REINFORCEMENT, SHUTTERING & SPECIFIED ADMIXTURES) for all depths below and upto plinth level in any shape, position and thickness etc. all complete as specified, shown and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.
8
51472
6434
Providing and laying REINFORCED CEMENT CONCRETE OF M-30 GRADE with 20 mm and down size graded crushed stone aggregates/ gravel in SUB-STRUCTURE e.g. foundations, raft, beams, slabs, pile caps, retaining walls, dyke walls, jambs, counterforts, buttresses, pedestals, pipe sleepers, columns, suspended floors, staircases, landings, steps, brackets etc., including equipment/ machine foundations & pedestals viz. compressors, ID & FD fans, pumps, generators, crushers, mills, etc., (including single pour concreting as specified on the drawing), applying cement wash on concrete surface (wherever no other surface application is specified), providing pockets, openings, recesses, chamfering, etc., wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. (EXCLUDING THE COST OF REINFORCEMENT, SHUTTERING & SPECIFIED ADMIXTURES) for all depths below and upto plinth level in any shape, position and thickness etc. all complete as specified, shown and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.
440
3116520
7083
Providing and laying REINFORCED CEMENT CONCRETE OF M-30 GRADE with 20 mm and down size graded crushed stone aggregates/ gravel in SUB-STRUCTURE e.g. trenches, culverts, manholes, pipe encasement, catchpits, drains, pits, etc., applying cement wash on concrete surface (wherever no other surface application is specified), providing pockets, openings, recesses, chamfering, etc., wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. (EXCLUDING THE COST OF REINFORCEMENT, SHUTTERING & SPECIFIED ADMIXTURES) for all depths below and upto plinth level in any shape, position and thickness etc. all complete as specified, shown and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.
20
143840
7192
RCC Superstructures - Non FIM Items
-
-
-
Providing and laying REINFORCED CEMENT CONCRETE OF M-30 GRADE with 20 mm and down size graded crushed stone aggregates/ gravel in SUPER STRUCTURE in suspended floors, slabs, beams, columns, walls including counterforts, staircases, landings, steps, facias, fins, mouldings, gutters, shelves, window sills, canopies, lintels, girders, ducts, brackets, chajjas with drip moulds, pedestals, posts, struts, equipment/ machine foundations, ramps etc. (including single pour concreting as specified on the drawing), providing cement wash (wherever no other surface application is specified), providing pockets, openings, recesses, chamfering wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. (EXCLUDING THE COST OF REINFORCEMENT, SHUTTERING AND SPECIFIED ADMIXTURES) FOR ALL HEIGHTS UPTO & INCLUSIVE OF 20 m ABOVE PLINTH LEVEL in any shape, position, thickness etc. all complete as specified, shown and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.
200
1508600
7543
RCC Flooring - Non FIM Items
-
-
-
Providing and laying REINFORCED CEMENT CONCRETE OF M-20 GRADE with 20mm and down size graded crushed stone aggregates / gravel in NON-SUSPENDED slabs / pavement slabs including pedestals, ramps etc. leaving pockets, laying in alternate panels to required slopes, all necessary form work and finishing the top surface rough or smooth, including cost of admixtures if used, providing pockets, openings, recesses, chamfering etc., wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. (EXCLUDING THE COST OF REINFORCEMENT AND SHUTTERING) for all depths below and upto plinth level in any shape, position and thickness etc. all complete as specified, shown and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.
70
449540
6422
Precast Elements - Non FIM Items
-
-
-
Manufacturing, transporting, supplying and erecting in position Reinforced Cement Concrete PRECAST ELEMENTS such as manholes, catch-basins, pits, pipe sleepers, box-culverts, drains, trenches, etc. of M-30 grade with 20mm and down size graded crushed stone aggregates/ gravel, each unit upto and inclusive of 1000 kg. for all leads, levels below plinth, shapes and thickness including all moulds, shuttering and centering, vibrating, tamping, curing, chamfering wherever required, providing lifting hooks, metal inserts, making holes, pockets, (only M.S. inserts to be measured & paid separately) transporting to site, erecting, levelling, aligning and fixing in position with cement mortar 1:3 (Cement : 3 Coarse Sand), breaking bricks and/ or concrete surfaces and making good the same etc. all complete (excluding the Cost of Reinforcement) and as directed. All materials including cement supplied by the contractor.
10
134680
13468
Manufacturing, transporting, supplying and erecting in position Reinforced Cement Concrete PRECAST ELEMENTS such as manholes, catch-basins, pits, pipe sleepers, box-culverts, drains, trenches, etc. of M-30 grade with 20mm and down size graded crushed stone aggregates/ gravel, each unit beyond 1000 kg and upto and inclusive of 3000 kg. for all leads, levels below plinth, shapes and thickness including all moulds, shuttering and centering, vibrating, tamping, curing, chamfering wherever required, providing lifting hooks, metal inserts, making holes, pockets, (only M.S. inserts to be measured & paid separately) transporting to site, erecting, levelling, aligning and fixing in position with cement mortar 1:3 (Cement : 3 Coarse Sand), breaking bricks and/ or concrete surfaces and making good the same etc. all complete (excluding the Cost of Reinforcement) and as directed. All materials including cement supplied by the contractor.
5
68685
13737
HYD Bars / MS Bars - Non FIM Items
-
-
-
Supplying and placing in position HIGH YEILD-STRENGTH DEFORMED STEEL BARS REINFORCEMENT of Grade Fe500D TMT conforming to IS:1786, for RCC work including transporting the Steel, straightening, cleaning, decoiling, cutting, bending to required shapes and lengths as per details, binding with 18 SWG black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, chairs, overlaps, welding, spacers, fanhooks etc. for all heights and depths etc. all complete as directed. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE.
75
4303500
57380
Centering and Shuttering - Non FIM Items
-
-
-
Providing and fixing CENTERING AND SHUTTERING in foundations, footings,raft beams, slabs, pile caps, retaining walls, jambs, counter-forts, buttresses, trenches, equipment/machine foundations, pedestals, abutments, pipe sleepers, columns, plinth beams, lintels, suspended slabs, beams, staircases, landings, steps, non-circular tunnels/bunkers/ silos/ shafts/ hoppers/liquid storage structures etc. for all depths below and upto & inclusive of plinth level including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed.
1500
637500
425
Providing and fixing CENTERING AND SHUTTERING in superstrctures in retaining walls, jambs, counter-forts, buttresses, equipment/ machine foundations, abutments,columns, lintels, suspended slabs, beams, staircases, landings, steps, non-circular tunnels/ bunkers/ silos/ shafts/ hoppers/ liquid storage structures etc. for all heights above plinth level including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed.
1500
901500
601
Providing and fixing CENTERING AND SHUTTERING for CURVED SHUTTERING in foundations in all types of Structures such as Chimneys/ Shafts/ Silos/ tunnels/ bunkers/ hoppers/ liquid storage structures/ domes/ ring wall for tanks, etc. for all depths below and upto & inclusive of plinth level including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed.
83
70799
853
Fixing Re-bars in already cast concrete - Non FIM Items
-
-
-
Designing, supplying and fixing rebars in already cast concrete, including drilling, cleaning hole with air blow-out & wire-brush and injecting odourless Chemical of approved make, packed in dual foil, with the help of dispenser into a hole of diameter and depth as per manufacture specification, at all levels & locations for high strength deformed steel reinforcement bars of dia. upto 12 mm of Grade Fe500D (conforming to IS:1786), DESIGNED FOR FULL TENSILE ANCHORAGE, including testing (as per manufacturer's recommendations), adjusting and making good any damage done to the structure etc. all complete as specified and directed. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE EXCLUDING REINFORCEMENT BARS.
5
7510
1502
Designing, supplying and fixing rebars in already cast concrete, including drilling, cleaning hole with air blow-out & wire-brush and injecting odourless Chemical of approved make, packed in dual foil, with the help of dispenser into a hole of diameter and depth as per manufacture specification, at all levels & locations for high strength deformed steel reinforcement bars of dia. 16 mm & 20 mm of Grade Fe500D (conforming to IS:1786), DESIGNED FOR FULL TENSILE ANCHORAGE, including testing (as per manufacturer's recommendations), adjusting and making good any damage done to the structure etc. all complete as specified and directed. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE EXCLUDING REINFORCEMENT BARS.
5
9540
1908
CONCRETE FOR LIQUID RETAINING/LEAK PROOF STRUCTURES (REFER SPECIFICATION NO.6-68-0005
-
-
-
RCC - Non FIM Items
-
-
-
Providing and laying Leak Proof Reinforced Cement Concrete of GRADE M-30 (minimum Cement content shall be as per BANDR/EIL Specifications) with 20 mm and down size graded crushed stone aggregates/ gravel at all positions and in any shape and thickness, in SUB-STRUCTURE, leaving pockets, recesses, vibrating, tamping, curing, testing (for leak-proofness) and rendering (if required to give smooth and even surface) in foundations, walls , beams, buttresses, columns, piers, slabs, tunnels, basements, storage bins, reservoirs etc. including cement wash (if no other surface application is specified) but excluding the cost of Reinforcement, Shuttering and specified admixtures, all complete as specified and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY CONTRACTOR.
150
1240200
8268
Water Proofing Comp. - Non FIM Items
-
-
-
Supplying and mixing of approved brand of integral WATER PROOFING COMPOUND in cement concrete, cement mortar etc. as per manufacturer's specifications or 1% by weight of cement (whichever is minimum), to make it leak proof/ water tight etc. all complete as specified and directed.
300
31800
106
PVC Water bars - Non FIM Items
-
-
-
Supplying and fixing in position 230mm wide x 5mm thick approved PVC WATER STOPS as per manufacturer's specifications in R.C.C. Structures including cutting, fixing, jointing by vulcanising etc. all complete as shown specified and directed.
90
41580
462
MISCELLANEOUS STEEL WORKS SPECIFICATIONS NO. 6-68-0008
-
-
-
Anchor Bolts - Non FIM Items
-
-
-
Supplying, fabricating, fixing and keeping in position at all levels and locations THREADED ANCHOR BOLTS of all diameters and nomenclature including nuts, washers, anchor plates, pipe sleeves etc. in foundations, columns, pedestals, slabs, beams, walls etc. or any other place as directed including handling & transporting, straightening if required, turning from relevant size M.S. rounds to required diameter, threading, welding, providing necessary templates and auxiliary dummy structures, if any, necessary tying and welding with reinforcement, adjustment of shuttering & reinforcement/any other fixture, greasing exposed metal surfaces, covering bolts and packing the sleeves with jute cloth etc. all complete as specified and directed.(SUPPLY OF ALL MATERIALS IN CONTRACTOR'S SCOPE).
1
116719
116719
MS Metal Inserts - Non FIM Items
-
-
-
Supplying, transporting, storing, fabricating and fixing in position M.S. METAL INSERT (with lugs) of any shape made out of flats, plates, rolled sections, pipes etc. providing necessary templates, staging, cutting, straightening, if required, bolting, welding as required and embedding in position on both Plain and Reinforced Cement concrete members inclusive of adjusting shuttering & reinforcement/ any other fixture, welding where necessary, tying and holding to correct level, line and position, any auxiliary dummy structures to support the heavy inserts, painting exposed surfaces with a coat of primer as per BANDR/EIL Specification No. 6-79-0020 (or as per Job Specification wherever applicable), etc. all complete for all depths and heights as specified and directed. (SUPPLY OF ALL MATERIALS IN CONTRACTOR'S SCOPE).
10
827420
82742
MS Rungs - Non FIM Items
-
-
-
Supplying, fabricating, fixing and keeping in position M.S. RUNGS in R.C.C. works at all depths and heights including handling, transporting the steel to site workshop and site of work, straightening, if required, cutting, bending to shape, necessary tying and welding with reinforcement, adjustment of shuttering, cleaning, surface preparation, shop primer as per BANDR/EIL Spec. 6-79-0020 (or Job Specification, wherever applicable) and two coats of anticorrosive paint of approved quality on the exposed portion of rungs etc. all complete as specified and directed (SUPPLY OF ALL MATERIALS IN CONTRACTOR'S SCOPE).
10
1310
131
MISCELLANEOUS ITEMS (REFER SPECIFICATION NO. 6-68-0013)
-
-
-
Antitermite - Non FIM Items
-
-
-
Providing and injecting approved chemical emulsions as specified for pre-constructional ANTI-TERMITE TREATMENT and creating a chemical barrier under and around column pits, wall trenches, basement excavations, top surfaces of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, surrounding of pipes and conduits etc. all complete as specified and directed. (Plinth area of the building at ground floor only shall be measured).
100
31100
311
Anticorrosive - Non FIM Items
-
-
-
Providing and laying 50mm thick ANTI-CORROSIVE LAYER under steel storage tanks with screened dry coarse sand mixed with A90 grade bitumen conforming to IS:73 including mixing in drum, heating to the required temperature, with 3% kerosene if required, tamping, dressing to the required slopes to form hard mass of specified compacted thickness etc. all complete as directed.
300
323100
1077
Sand Filling - Non FIM Items
-
-
-
Supplying and filling approved SAND of specified quality under floors, in foundations, plinths, tank foundations etc. for all depths and heights including cost of sand, royalties, transportation to site for all leads and lifts, including loading, unloading, spreading in layers of loose thickness not exceeding 150 mm, watering, ramming, compacting with mechanical compactors and/or other equipment to the specified levels to achieve 85% relative density as per IS:2720 Part XIV, including preparation of subgrade to the required slope, providing testing apparatus and testing the degree of consolidation all complete as per drawings, specifications and direction of BANDR Engineer-in-Charge. The rates shall be inclusive of the cost of all labour, material, equipments etc. all complete .
750
1440000
1920
BI-POLAR CONCRETE PENETRATING CORROSION INHIBITING ADMIXTURE
-
-
-
Supplying and mixing of approved brand of BI-POLAR CONCRETE PENETRATING CORROSION INHIBITING ADMIXTURE (confirming to BANDR/EIL Specification No. 6-68-0017) in concrete as per manufacturer's specification for protection of reinforcement against corrosion. Supply of admixture in Contractor's scope.
2500
285000
114
RCC Grade M20 - Non FIM items
-
-
-
Providing and laying REINFORCED CEMENT CONCRETE OF GRADE M-20 with 20mm and down size graded crushed stone aggregate/ gravel in NON-SUSPENDED ground floor slab, pavement and ramps etc., laying in alternate panels to required levels and falls by SUCTION DRYING PROCESS including leaving dowels, pockets, openings, side shuttering, supply & installation of removable track rails, leave-in-place rails, vibrating by poker/ needle vibrator, surface vibrator, mechanical floating and power toweling, curing and rendering if required to give smooth and even surface (Excluding cost of reinforcement) etc. all complete as specified and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR.
2
13758
6879
"NOTE:-
THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC BUT EXCLUDING GST."
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements