Border Security Force Tender

Removing old existing synthetic enamel paint and the like by scrapping by using grinder or wire brush or sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as per direction of Engineer-in-charge.

P/F G.I. barbed wire. of size 2.50 N/mm (Size designation - 2) type A (weight to be not less than 108 gms per meter length of barbed wire), conforming to I.S. code 278 : 2009 duly dipped in anticorrosive bitumastic paint twice. fixing to the existing M.S. angle iron posts placed at 3.00 mtr c/c and in upto height of 20 horizontal rows including 2.5 mm dia clips / stapples 50mm long in horizontal rows, diagonals, and weavings etc complete as per direction of Engineer-in-charge. (Payment to be made per mtr cost of total length of barbed wire used.)

Providing ,laying and fixing of galvanised punched tape concertina coil 1050 mm dia having galvanised spring steel core wire of 2.6 mm dias cold drawn steel punched tape of low corbon steel having series of sharp barbs uniformly punched along its length, 550 barbs on periphery per revolution crimped on steel spring core wire,galvanised clips, GI steel,wire handle hooked to coil for handling MS square bar spikes hooked to coil having pointed faces for anchorage and weight 15.20 kg per coil including spreading of each coil 10 metre lenght and adequaley tied to existing GI barbed wire fencing and fencing post GI wire of not less than 16 gauge at every 1000 mm spacing ,tying of handle of succeeding coil with proceeding coil with GI wire of not less than 16 gauge , properly anchoring of spikes at start and end if coil in precast cement concrete blocks of size 20 x 20x 20 cm . and of mix 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) for bottom layer applying anticorrosive bitumastic paint(IS-158) of approved brand and manufacture in black shade on concertina coil to give a smooth and even shade by dipping in paint twice complete as per drawing and direction of Engineer-in-charge.