Bodoland Territorial Council Tender
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Costs
EMD
₹ 54,73,235Document Cost
₹ 20,000Tender Fee
Refer Documents
Summary
Construction Of Institute Of Paramedical And Nursing Sciences At Udalguri District Under Sdp To Be Funded By Govt. Of Assam. (tn_52_3)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_BTC_35263_1Bid Award Id
ViewTender No
125/ACE/NIT/Infra/BTC/2022-23Tender Authority
Bodoland Territorial Council ViewPurchaser Address
-Website
http://https://www.bodoland.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
1.1.2 Carriage of material by mechanical transport including loading, unloading to 5km.
119.34
-
-
... More
2.35.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:
2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
1000
-
-
... More
CONCRETE WORKS
4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
4.1.2 1:1.5:3 (1 Cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
3.8
-
-
... More
4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
206.57
-
-
... More
4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth
198
-
-
... More
REINFORCED CEMENT CONCRETE WORK
5.9 Centering and shuttering including strutting, propping etc. and removal of form for:
5.9.1 Foundations, footings, bases of columns, etc. for mass concrete.
100.8
-
-
... More
5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
106.34
-
-
... More
5.9.3 Suspended floors, roofs, landings, balconies and access platform.
4581.9
-
-
... More
5.9.4 Shelves (Cast in situ)
63.47
-
-
... More
5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers
4363.11
-
-
... More
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts.
2409.23
-
-
... More
5.9.7 Stairs, (excluding landings) except spiral-staircases.
247.68
-
-
... More
5.9.16.1 Under 20 cm wide
495
-
-
... More
5.9.19 Weather shade, Chajjas, corbels etc., including edges
56.1
-
-
... More
5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo- Mechanically Treated bars of grade Fe-500D or more.
367927.77
-
-
... More
5.33 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland
/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
5.33.1.1 All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum
839.19
-
-
... More
5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum
34.9
-
-
... More
5.33.2.1 All works above plinth level upto floor V level. Concrete of M25 grade with minimum cement content of 330 kg /cum
1392.1
-
-
... More
5.33.2.2 Concrete of M30 grade with minimum cement content of 350 kg /cum
274.86
-
-
... More
5.35 Add for using extra cement in the items of design mix over and above the specified cement content therein.
1524.62
-
-
... More
5.18.2 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. 40 mm Thick
129.6
-
-
... More
BRICK WORK
6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
59.32
-
-
... More
6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
873.25
-
-
... More
6.13.1 Half brick masonry with common burnt clay (non modular) bricks of class- 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement : 3 coarse sand)
581.86
-
-
... More
6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
581.86
-
-
... More
C/O Apron drain of width 150mm and depth as per required of site but minimum 150 mm with neat finish & required slope as per apporoved by E/I.
165
-
-
... More
MARBLE & GRANITE WORK
8.2 Providing and fixing 18mm thick gang saw cut ,mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size , approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.
8.2.2 Granite of any colour and shade
8.2.2.2 Area of slab over 0.50 Sqm.
145.62
-
-
... More
8.4 Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150mm with epoxy resin baesd adhesive including cleaning etc. complete.
81.89
-
-
... More
8.5 Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/Stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edge etc. complete.
35
-
-
... More
9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
42.84
-
-
... More
9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
9.97.2 250x10 mm
2040
-
-
... More
9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
664
-
-
... More
9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
9.100.1 125 mm
4820
-
-
... More
9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
9.101.1 Single rubber stopper
664
-
-
... More
9.103 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.
189
-
-
... More
9.147D Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately)
9.147D.4 Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).
830.48
-
-
... More
Steel Works
10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
2086.43
-
-
... More
10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
10.25.1 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
961.2
-
-
... More
10.13 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
10.13.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20
mm nominal size).
315
-
-
... More
10.11 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).
10.11.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
2306.88
-
-
... More
10.29 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.
10.29.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
96.12
-
-
... More
9.10 Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B), using 4 mm thick float glass panes for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, all as per directions of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately)
9.10.1 30 mm thick shutters
4.8
-
-
... More
CLADDING WORK
8.9 Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete
8.9.1 8 mm thick
8.9.1.2 Granite of any colour and shade
58.08
-
-
... More
11.31 Extra for pre finished nosing to treads of steps of kota stone.
587.4
-
-
... More
11.32 Extra for kota stone flooring in treads of steps and risers using single length up to 2.00 metre.
330.98
-
-
... More
11.26 Kota stone in flooring 20 mm thick and joint filled 1:2 cement and coarse sand with approved colouring materials to be given and even shade with 12 mm base coat (bedding) of 1:4 cement and coarse sand mortar and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour T & P etc. requird for proper completion of the work excluding base concrete.
11.26.1 25 mm thick
237.15
-
-
... More
11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
7.69
-
-
... More
11.39 Providing and laying antiskid rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
30
-
-
... More
11.41 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
11.41.2 Size of Tile 600x600 mm
4700.65
-
-
... More
11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.
11.46.2 Size of Tile 600x600 mm
1665.05
-
-
... More
11.56.1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
875.98
-
-
... More
16.90 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
34.56
-
-
... More
ROOFING
12.21.1 Providing and laying gola 75x75mm in cement concrete M15 grade including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design in 75x75 mm deep chase.
199.85
-
-
... More
12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
22
-
-
... More
12.31 Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately):
12.31.1 Flat surfaces
610.85
-
-
... More
12.31.2 Curved surfaces
916.28
-
-
... More
12.45 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making
12.45.1 painting with : openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)
2290.69
-
-
... More
FINISHING WORK
13.4.2 12 mm cement plaster of mix: 1:6 (1 cement: 6 coarse sand) ON INNER SURFACE
5756.75
-
-
... More
13.5.2 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles not exceeding 80mm in girth and finished even and smooth (i) 1 cement: (iii) 1 cement: 6 coarse sand
A. 0 M TO 10 M
4542.41
-
-
... More
13.22 Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
B. 10 M TO 13 M
585
-
-
... More
C. 13 M TO 16 M
551.34
-
-
... More
D. 16 M TO 19 M
551.34
-
-
... More
E. 19 M TO 22 M
690.09
-
-
... More
F. 22 M TO 25 M
322.5
-
-
... More
13.16 6 mm cement plaster of mix :
13.16.1 1:3 (1 cement : 3 fine sand)
2868.57
-
-
... More
13.41 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :
13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer
8625.32
-
-
... More
13.45 Finishing walls with textured exterior paint of required shade :
13.45.1 Finishing walls with textured exterior paint of required shade :
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
4542.41
-
-
... More
13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
13.61.1 Two or more coats on new work
391.18
-
-
... More
13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
13167.73
-
-
... More
ALUMINIUM WORK
21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed echanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. Glazing and paneling to be paid for separately)
21.1.1 For fixed portion.
21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
16296
-
-
... More
21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
5943.6
-
-
... More
21.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with
C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge.
21.2.2 Pre-laminated particle board with decorative lamination on both sides
396.24
-
-
... More
21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)
396.24
-
-
... More
21.4 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
21.4.1 With stainless steel cover plate minimum 1.25 mm thickness
150
-
-
... More
21.8 Filling the gap in between aluminium frame and adjacent RCC/Brickwork/ Stone Work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge
21.8.1 Upto 5mm depth and 5mm width
475.49
-
-
... More
21.17 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
9509.76
-
-
... More
21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, including all patch fittings all complete as per drawings, direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately).
4.8
-
-
... More
25.1 Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in- Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). for ACP & STRUCTURAL GLAZING WORK
1440
-
-
... More
1. Performance Laboratory Test forAir Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04
testing method for a range of testing limit 1 to 200 mVhr 2 . Static Water Penetration Test. (50pa to 1500p) as per
ASTME- 331-09 testing method for a range up to 2000 ml. 3. Dynamic Water Penetration (50pa to 1500pa) as perAAMA
501.01- 05 testing method for a range upto 2000 ml 4. Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME-330-10 testing method for a
range upto 50 mm 5. Seismic Movement Test (upto 30 mm) as perAAMA501.4- 09 testing method for Qualitative test, Tests to be
conducted on site. 6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml
120
-
-
... More
25.3 Providing, assembling and supplying visionglass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm
120
-
-
... More
25.4 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin-Charge.
9.6
-
-
... More
(i) Ist course of applying cement slurry @ 4.4 Kg/Sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per Sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/Sqm.)
383.65
-
-
... More
Supplying and Stacking Filling sunken floor with over burnt jhama brick aggregate 90mm to 45mm including compacting of materials complete as specified and
directed for all levels.
21.54
-
-
... More
22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
1000
-
-
... More
ADMIN BLOCK
SANITARY
17.1 Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, Parryware/Hindware/Seabird/Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.
17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests
10
-
-
... More
17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
17.2.2 W.C. pan with ISI marked black solid plastic seat and lid
60
-
-
... More
17.7 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required.
17.7.1 a)White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
70
-
-
... More
17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
17.28.1 Semi rigid pipe
17.28.1.1 32 mm dia
70
-
-
... More
17.28.1.2 40 mm dia
7
-
-
... More
17.31 Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
70
-
-
... More
17.5 Providing and fixing white vitreous china flat back half stall urinal of size 580*380*350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in D.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required:
17.5.2 Range of two half stall urinals with 5 litre PV.C. automatic flushing cistern.
10
-
-
... More
8.10 Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in Urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished
smooth.
8.10.2 Granite Stone of approved shade
20
-
-
... More
CP Brass fittings
18.21 Providing and fixing unplasticised PVC connection pipe with brass unions
18.21.2 45 cm length
18.21.2.1 15 mm nominal bore
140
-
-
... More
17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean & Wall moutain type W.C. of quality and make as approved by Engineer - in -charge.
60
-
-
... More
18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
18.49.1 a) 15 mm nominal bore
70
-
-
... More
18.53 Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931
18.53.1 a) 15 mm nominal bore
140
-
-
... More
17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
70
-
-
... More
17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
50
-
-
... More
17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
17.73.1 450 mm long towel rail with total length of 495mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
50
-
-
... More
I C.I. SOIL WASTE & VENT PIPES AND FITTINGS
Providing & fixing soil, waste and vent pipes.
17.35.1.2 a) 100mm dia centrifugally cast iron S & S pipe.
420
-
-
... More
17.35.2.2 b) 75mm dia centrifugally cast iron S & S pipe.
310
-
-
... More
18.10 Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. ( for wash basin waste )
18.10.4 32mm dia nominal bore
90
-
-
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of
diameters.
17.58.1 a) 100mm
50
-
-
... More
17.58.2 b)75mm
40
-
-
... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate
20mm nominal size). Including cost of cutting holes & making good the walls etc.
17.37.1 a) for 100mm dia pipe.
60
-
-
... More
17.37.2 b) for 75mm dia pipe.
45
-
-
... More
Providing & fixing cast iron coller.
17.57.1.2 a) 100mm dia.
50
-
-
... More
17.57.2.2 b) 75mm dia.
35
-
-
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting
and making good the walls and floors :
17.60.1.1 a) 100mm inlet & 100mm outlet.
50
-
-
... More
17.60.2.1 a) 100mm inlet & 75mm outlet.
40
-
-
... More
Providing and fixing bend of required degree with
access door, insertion rubber washer 3mm thick, bolts and nuts complete.
17.38.1.2 a) 100mm
80
-
-
... More
17.38.2.2 b) 75mm
100
-
-
... More
Providing and fixing plain bend of required degree.
17.39.1.2 a) 100mm
60
-
-
... More
17.39.2.2 b) 75mm
55
-
-
... More
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
17.43.1.2 100x100x100mm
50
-
-
... More
17.43.2.2 75x75x75mm
30
-
-
... More
Providing and fixing centrifugaly cast iron single
equal plain junction of required degree.
17.44.1.2 100x100x100mm
50
-
-
... More
17.44.2.2 75x75x75mm
30
-
-
... More
Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :
17.47.1.2 100x100x75mm
40
-
-
... More
Providing and fixing single unequal plain invert
branch of required degree :
17.52.1.2 100x100x75mm
35
-
-
... More
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete :( c.o.p.)
17.55.1.2 a) 100mm
20
-
-
... More
17.55.2.2 b) 75mm
20
-
-
... More
Providing and fixing cast iron terminal guard.
17.56.1.2 100 mm
20
-
-
... More
17.56.2.2 75 mm
10
-
-
... More
III INTERNAL RAIN WATER DRAINAGE WORK
19.2.1 Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground)
110 mm dia
100
-
-
... More
12.41 Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.
12.41.2 110 mm
180
-
-
... More
12.42 Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.
12.42.5.2 Bend 87.5 degree
12.42.5.2 110 mm Bend
10
-
-
... More
12.42.6 Shoe (Plain)
12.42.6.2 110 mm Shoe
10
-
-
... More
12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
10
-
-
... More
12.43 Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the
wall etc. complete.
12.43.2 110 mm
10
-
-
... More
12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
10
-
-
... More
IV INTERNAL WATER SUPPLY WORKS
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.
Concealed work including cutting chases and
making good the walls etc.
18.8.2 20mm dia nominal outer dia pipes
675
-
-
... More
18.8.3 25mm dia nominal outer dia pipes
575
-
-
... More
18.8.4 32mm dia nominal outer dia pipes
325
-
-
... More
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and
making good walls etc. (internal work).
Internal work-Exposed on wall
18.10.1 15mm dia nominal bore
170
-
-
... More
18.10.2 20mm dia nominal bore
60
-
-
... More
18.10.3 25mm dia nominal bore
150
-
-
... More
18.10.4 32mm dia nominal bore
125
-
-
... More
18.10.5 40mm dia nominal bore
70
-
-
... More
18.10.6 50mm dia nominal bore
90
-
-
... More
Terrace and external work
18.12.7 65mm dia nominal bore
185
-
-
... More
18.12.8 80mm dia nominal bore
147
-
-
... More
Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both
of approved quality for new work.
18.38.2 20mm dia nominal bore
60
-
-
... More
18.38.3 25mm dia nominal bore
150
-
-
... More
18.38.4 32mm dia nominal bore
125
-
-
... More
18.38.5 40mm dia nominal bore
70
-
-
... More
18.38.6 50mm dia nominal bore
90
-
-
... More
Terrace and external work
18.40.7 65mm dia nominal bore
185
-
-
... More
18.40.8 80mm dia nominal bore
147
-
-
... More
Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work).
18.46.1 15mm dia nominal bore
70
-
-
... More
18.46.2 20mm dia nominal bore
60
-
-
... More
18.46.3 25mm dia nominal bore
50
-
-
... More
18.46.4 32mm dia nominal bore
65
-
-
... More
18.46.5 40mm dia nominal bore
40
-
-
... More
18.46.6 50mm dia nominal bore
40
-
-
... More
18.46.7 65mm dia nominal bore
85
-
-
... More
18.46.8 80mm dia nominal bore
33
-
-
... More
18.17 Providing and fixing gun metal gate valve with wheel of approved quality.
18.17.1A 20mm dia nominal bore
70
-
-
... More
18.17.1 25mm dia nominal bore
60
-
-
... More
18.17.2 32mm dia nominal bore
50
-
-
... More
18.17.3 40mm dia nominal bore
25
-
-
... More
18.17.4 50mm dia nominal bore
30
-
-
... More
18.17.5 65mm dia nominal bore
22
-
-
... More
18.17.6 80mm dia nominal bore
15
-
-
... More
18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats
complete :
18.18.3 25 mm nominal bore
2
-
-
... More
V INTERNAL SEWERAGE SYSTEM
2.10 Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed,
within a lead of 50m.
2.10.1 All kinds of soil
2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not
exceeding 300mm.
392
-
-
... More
19.1 Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
19.1.1 100mm diameter
181
-
-
... More
19.2 Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per standard design
19.2.1 100mm dia SW pipe
181
-
-
... More
19.6 Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints
etc. complete.
19.6.2 150 mm. dia. RCC Pipes
211
-
-
... More
19.3 Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design
19.3.2 150 mm. dia. RCC Pipes
211
-
-
... More
19.4 Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than
2.70 kg as per standard design
19.4.2 150 x 100 mm size P type
19.4.2.2 With Sewer bricks conforming to IS : 4885
8
-
-
... More
19.7 Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design.
19.7.1 Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and
weight of frame 15kg).
19.7.1.1 With FPS bricks of class designation 75
(i) For Sewer Line
8
-
-
... More
Extra for depth for manholes:
19.8.1.1 Size 90x80cm with FPS bricks(class I ).
2
-
-
... More
19.15 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm nominal size) as per
standard design
19.15.1 With 20x20 mm square bar
34
-
-
... More
MR. RO Plant 250 LPH (Liter per hour)
MR-1 PLANT CAPACITY - 250 LPH
Treated Water Quality Turbidity : 1NTU
pH : 6.5-7.0
Chlorides : 10 ppm Sulphates : 5 ppm TDS : 150 ppm
500L STORAGE TANK AND DRINKING FOUNTAIN
2
-
-
... More
MR-2 Supply installation, testing and commissioning of recessed bi level drinking water fountain, with double SS bubbler. Drinking water fountain with 8GPH cooling capacity, stainless steel body ,approx size 1003mmX Depth 400 mmX hight 1035mm, SS bubbler guard operated between 50 to 120 PSI,
,with MDCU29 antimicrobial touch part, with water ways are lead free matterial chilling unit suitable for R134a refrigerant, adjustable thermo state, Green building, GRIHA,TUV And NSF Certifide, supply complete with all accessories with 100 micron stainer, Model- M8CRY-Oasis- Mechanical + Sensor
Both Operation
10
-
-
... More
PRINCIPAL RESIDENCE
CIVIL
2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. 2.6.1 All kinds of soil
143.1
-
-
... More
2.35.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:
2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
187.19
-
-
... More
CONCRETE
4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
32.29
-
-
... More
4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
32.43
-
-
... More
4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly
soaked in kerosene oil.
32.43
-
-
... More
REINFORCED CEMENT CONCRETE
5.9 Centering and shuttering including strutting, propping etc. and removal of form for :
5.9.1 Foundations, footings, bases of columns, etc. for mass
concrete.
25.5
-
-
... More
5.9.3 Suspended floors, roofs, landings, balconies and access
platform.
187.19
-
-
... More
5.9.4 Shelves (Cast in situ)
1.46
-
-
... More
5.9.5 Lintels, beams, plinth beams, girders, bressumers and
cantilevers
362.84
-
-
... More
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts.
59.22
-
-
... More
5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
9286
-
-
... More
5.33 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland
/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
5.33.1.1 All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum
40.59
-
-
... More
5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum
1.49
-
-
... More
5.33.2.1 All works above plinth level upto floor V level. Concrete of M25 grade with minimum cement content of 330 kg /cum
41.89
-
-
... More
5.33.2.2 Concrete of M30 grade with minimum cement content of 350
kg /cum
3.17
-
-
... More
5.35 Add for using extra cement in the items of design mix over and
above the specified cement content therein.
52.28
-
-
... More
5.18.2 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. 40 mm Thick
20
-
-
... More
BRICK WORK
6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
47.33
-
-
... More
6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
FLOOR
77.04
-
-
... More
TERRACE
13.98
-
-
... More
6.13.1 Half brick masonry with common burnt clay (non modular) bricks of class- 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement : 3 coarse sand)
G. FLOOR
5.37
-
-
... More
6.44 Brick edging 7cm wide 11.4cm. deep to plinth protection with
bricks of class designation 75 including grouting with cement mortar 1:4 (1 cement : 4 fine sand)
93.53
-
-
... More
DOOR WINDOW WORK
9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm
34
-
-
... More
9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
9.97.2 250X10 mm
17
-
-
... More
9.97.4 150X10 mm
65
-
-
... More
9.97.5 100X10 mm
8
-
-
... More
9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
9.100.1 125 mm
34
-
-
... More
9.100.2 100 mm
40
-
-
... More
9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
9.101.1 Single rubber stopper
12
-
-
... More
Providing and fixing door buffer of material stainless steel ISI marked with nuts and screws etc. complete as directed by
Engineer in Charge :
17
-
-
... More
9.83 Providing and fixing aluminium dye cast tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg to 80 kg and door width from 700 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
4
-
-
... More
9.79.2 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.
9.79.2 50 mm
3
-
-
... More
9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)
9.1.2 Sal wood
1.37
-
-
... More
9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws
24.57
-
-
... More
9.20.3 25 mm thick (for cupboard) including ISI marked nickel
plated bright finished M.S. piano hinges with necessary screws
10.7
-
-
... More
9.31.1 Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, as per directions of Engineer-in-charge:
35 mm thick shutters
50.48
-
-
... More
9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge.
24.75
-
-
... More
9.120 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick,
20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in- charge, manufacturer's specification & drawing.
9.120.1 30 mm thick plain PVC door shutters
7.88
-
-
... More
M.S. WORK
10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
10.25.1 In stringers, treads, landings etc. of stair cases, including use of
chequered plate wherever required, all complete
1031.06
-
-
... More
10.30.1 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with
4.0 mm thick glass panes
47.35
-
-
... More
10.6 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and
jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and
outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs
manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness
for rolling shutters
10.6.2 80x1.20 mm M.S. laths with 1.20 mm thick top cover
6.48
-
-
... More
10.7 Providing and fixing ball bearing for rolling shutters.
2
-
-
... More
WATER PROOFING
22.7 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terracesetc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer- in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge..
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. SUB HEAD : 22- WATER PROOFING 1548
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
22.7.1 With average thickness of 120 mm and minimum thickness at
khurra as 65 mm.
187.19
-
-
... More
22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4
hours followed with water curing for 48 hours.
The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
14.41
-
-
... More
FINISHING
13.5.2 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles not exceeding 80mm in girth and finished even and smooth (i) 1 cement: (iii) 1 cement: 6
coarse sand
13.5.2 1:3 (1 cement : 6 fine sand)
471.9
-
-
... More
13.4.2 12 mm cement plaster of mix: 1:6 (1 cement: 6 coarse sand)
ON INNER SURFACE
423.92
-
-
... More
13.16.1 1:3 (1 cement : 3 fine sand)
158.83
-
-
... More
13.21 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the
manufacturers.
38
-
-
... More
13.41 Distempering with oil bound washable distemper of approved
brand and manufacture to give an even shade :
13.41.1 New work (two or more coats) over and including water
thinnable priming coat with cement primer
374.42
-
-
... More
13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work
208.33
-
-
... More
13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
New work (Two or more coats applied @ 1.43 ltr/10 sqm over
and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
471.9
-
-
... More
13.80 PProviding and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1054.64
-
-
... More
13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
13.61.1 Two or more coats on new work
99.7
-
-
... More
TILES AND STONE FLOORING WORK
11.13.1 Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick. (In Appron)
369.6
-
-
... More
11.39 Providing and laying antiskid rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
68.94
-
-
... More
11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. ( Size of Tile 600 x 600 mm)
102.56
-
-
... More
11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete
11.3.1 40 mm thick with 20 mm nominal size stone aggregate
114.17
-
-
... More
11.6 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.
11.6.1 18 mm thick
3.83
-
-
... More
11.56.1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent sqm 3908.80
47.34
-
-
... More
8.2 Providing and fixing 18mm thick gang saw cut ,mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size , approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.
8.2.2.2 Area of slab over 0.50 sqm.
4.21
-
-
... More
8.4 Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150mm with epoxy resin baesd adhesive including cleaning
etc. complete.
4.21
-
-
... More
8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite / stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
4
-
-
... More
PRINCIPAL RESIDENCE
SANITARY
17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
17.2.2 W.C. pan with ISI marked black solid plastic seat and lid
3
-
-
... More
17.7 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required.
17.7.1 a)White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
3
-
-
... More
17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
17.28.1 Semi rigid pipe
17.28.1.1 32 mm dia
3
-
-
... More
17.31 Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
3
-
-
... More
CP Brass fittings
18.21 Providing and fixing unplasticised PVC connection pipe with brass unions
18.21.2 45 cm length
18.21.2.1 15 mm nominal bore
6
-
-
... More
17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean & Wall moutain type W.C. of quality and make as approved by Engineer - in -
charge.
3
-
-
... More
18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
18.49.1 a) 15 mm nominal bore
3
-
-
... More
18.53 Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931
18.53.1 a) 15 mm nominal bore
6
-
-
... More
17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (For bath)
15 mm diameter
2
-
-
... More
18.22 Providing and fixing C.P. brass shower rose with 15 or 20mm inlet
18.22.2 150 mm diameter
2
-
-
... More
17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
3
-
-
... More
17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
3
-
-
... More
17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
17.73.1 450 mm long towel rail with total length of 495mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
3
-
-
... More
I C.I. SOIL WASTE & VENT PIPES AND FITTINGS
Providing & fixing soil, waste and vent pipes.
17.35.1.2 a) 100mm dia centrifugally cast iron S & S pipe.
12
-
-
... More
17.35.2.2 b) 75mm dia centrifugally cast iron S & S pipe.
20
-
-
... More
18.10 Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. ( for wash basin waste )
18.10.4 32mm dia nominal bore
12
-
-
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of
diameters.
17.58.1 a) 100mm
3
-
-
... More
17.58.2 b)75mm
4
-
-
... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate
20mm nominal size). Including cost of cutting holes & making good the walls etc.
17.37.1 a) for 100mm dia pipe.
2
-
-
... More
17.37.2 b) for 75mm dia pipe.
2
-
-
... More
Providing & fixing cast iron coller.
17.57.1.2 a) 100mm dia.
2
-
-
... More
17.57.2.2 b) 75mm dia.
2
-
-
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting
and making good the walls and floors :
17.60.1.1 a) 100mm inlet & 100mm outlet.
2
-
-
... More
17.60.2.1 a) 100mm inlet & 75mm outlet.
2
-
-
... More
Providing and fixing bend of required degree with
access door, insertion rubber washer 3mm thick, bolts and nuts complete.
17.38.1.2 a) 100mm
2
-
-
... More
17.38.2.2 b) 75mm
2
-
-
... More
Providing and fixing plain bend of required degree.
17.39.1.2 a) 100mm
2
-
-
... More
17.39.2.2 b) 75mm
2
-
-
... More
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
17.43.1.2 100x100x100mm
2
-
-
... More
17.43.2.2 75x75x75mm
1
-
-
... More
Providing and fixing centrifugaly cast iron single
equal plain junction of required degree.
17.44.1.2 100x100x100mm
1
-
-
... More
17.44.2.2 75x75x75mm
1
-
-
... More
Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :
17.47.1.2 100x100x75mm
3
-
-
... More
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete :( c.o.p.)
17.55.1.2 a) 100mm
2
-
-
... More
17.55.2.2 b) 75mm
2
-
-
... More
Providing and fixing cast iron terminal guard.
17.56.1.2 100 mm
3
-
-
... More
17.56.2.2 75 mm
3
-
-
... More
III INTERNAL RAIN WATER DRAINAGE WORK
19.2.1 Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground)
110 mm dia
6
-
-
... More
12.41 Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.
12.41.2 110 mm
20
-
-
... More
12.42 Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.
12.42.5.2 Bend 87.5 degree
12.42.5.2 110 mm Bend
6
-
-
... More
12.42.6 Shoe (Plain)
12.42.6.2 110 mm Shoe
6
-
-
... More
12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
6
-
-
... More
12.43 Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the
wall etc. complete.
12.43.2 110 mm
6
-
-
... More
12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
6
-
-
... More
IV INTERNAL WATER SUPPLY WORKS
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.
Concealed work including cutting chases and
making good the walls etc.
18.8.2 20mm dia nominal outer dia pipes
14
-
-
... More
18.8.3 25mm dia nominal outer dia pipes
10
-
-
... More
18.8.4 32mm dia nominal outer dia pipes
8
-
-
... More
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and
making good walls etc. (internal work).
Internal work-Exposed on wall
18.10.2 20mm dia nominal bore
8
-
-
... More
18.10.3 25mm dia nominal bore
4
-
-
... More
18.10.5 40mm dia nominal bore
5
-
-
... More
18.10.6 50mm dia nominal bore
6
-
-
... More
Terrace and external work
18.12.7 65mm dia nominal bore
21
-
-
... More
18.12.8 80mm dia nominal bore
20
-
-
... More
Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both
of approved quality for new work.
18.38.2 20mm dia nominal bore
8
-
-
... More
18.38.3 25mm dia nominal bore
4
-
-
... More
18.38.5 40mm dia nominal bore
5
-
-
... More
18.38.6 50mm dia nominal bore
6
-
-
... More
Terrace and external work
18.40.7 65mm dia nominal bore
16
-
-
... More
18.40.8 80mm dia nominal bore
15
-
-
... More
Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work).
18.46.1 15mm dia nominal bore
2
-
-
... More
18.46.2 20mm dia nominal bore
2
-
-
... More
18.46.3 25mm dia nominal bore
2
-
-
... More
18.46.4 32mm dia nominal bore
2
-
-
... More
18.46.7 65mm dia nominal bore
2
-
-
... More
18.46.8 80mm dia nominal bore
2
-
-
... More
18.17 Providing and fixing gun metal gate valve with wheel of approved quality.
18.17.1A 20mm dia nominal bore
4
-
-
... More
18.17.1 25mm dia nominal bore
3
-
-
... More
18.17.2 32mm dia nominal bore
2
-
-
... More
18.17.3 40mm dia nominal bore
3
-
-
... More
18.17.4 50mm dia nominal bore
1
-
-
... More
18.17.5 65mm dia nominal bore
8
-
-
... More
18.17.6 80mm dia nominal bore
8
-
-
... More
18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats
complete :
18.18.3 25 mm nominal bore
1
-
-
... More
V INTERNAL SEWERAGE SYSTEM
2.10 Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed,
within a lead of 50m.
2.10.1 All kinds of soil
2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not
exceeding 300mm.
35
-
-
... More
19.1 Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
19.1.1 100mm diameter
16
-
-
... More
19.2 Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per standard design
19.2.1 100mm dia SW pipe
16
-
-
... More
19.6 Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints
etc. complete.
19.6.2 150 mm. dia. RCC Pipes
19
-
-
... More
19.3 Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design
19.3.2 150 mm. dia. RCC Pipes
19
-
-
... More
19.4 Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than
2.70 kg as per standard design
19.4.2 150 x 100 mm size P type
19.4.2.2 With Sewer bricks conforming to IS : 4885
3
-
-
... More
19.7 Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design.
19.7.1 Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and
weight of frame 15kg).
19.7.1.1 With FPS bricks of class designation 75
(i) For Sewer Line
5
-
-
... More
19.15 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm nominal size) as per
standard design
19.15.1 With 20x20 mm square bar
42
-
-
... More
TYPE-4
CIVIL
2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. 2.6.1 All kinds of soil
285.12
-
-
... More
2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.All kinds
of soil
BELOW GROUND 1.5 TO 3.0 M
47.52
-
-
... More
2.35.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:
2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
287.78
-
-
... More
CONCRETE
4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
38.1
-
-
... More
4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
49.89
-
-
... More
4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly
soaked in kerosene oil.
49.89
-
-
... More
REINFORCED CEMENT CONCRETE
5.9 Centering and shuttering including strutting, propping etc. and removal of form for :
5.9.1 Foundations, footings, bases of columns, etc. for mass
concrete.
42
-
-
... More
5.9.3 Suspended floors, roofs, landings, balconies and access
platform.
287.78
-
-
... More
5.9.4 Shelves (Cast in situ)
1.46
-
-
... More
5.9.5 Lintels, beams, plinth beams, girders, bressumers and
cantilevers
537.17
-
-
... More
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts.
98.94
-
-
... More
5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
19698
-
-
... More
5.33 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland
/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
5.33.1.1 All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum
71.95
-
-
... More
5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum
3
-
-
... More
5.33.2.1 All works above plinth level upto floor V level. Concrete of M25 grade with minimum cement content of 330 kg /cum
62.95
-
-
... More
5.33.2.2 Concrete of M30 grade with minimum cement content of 350
kg /cum
4.86
-
-
... More
5.35 Add for using extra cement in the items of design mix over and
above the specified cement content therein.
85.65
-
-
... More
5.18.2 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. 40 mm Thick
20
-
-
... More
BRICK WORK
6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
49.68
-
-
... More
6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
FLOOR
78.1
-
-
... More
TERRACE
29.41
-
-
... More
6.13.1 Half brick masonry with common burnt clay (non modular) bricks of class- 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement : 3 coarse sand)
G. FLOOR
172.92
-
-
... More
6.44 Brick edging 7cm wide 11.4cm. deep to plinth protection with
bricks of class designation 75 including grouting with cement mortar 1:4 (1 cement : 4 fine sand)
95.97
-
-
... More
DOOR WINDOW WORK
9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm
48
-
-
... More
9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
9.97.2 250X10 mm
24
-
-
... More
9.97.4 150X10 mm
84
-
-
... More
9.97.5 100X10 mm
24
-
-
... More
9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
9.100.1 125 mm
48
-
-
... More
9.100.2 100 mm
57
-
-
... More
9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
9.101.1 Single rubber stopper
19
-
-
... More
Providing and fixing door buffer of material stainless steel ISI marked with nuts and screws etc. complete as directed by
Engineer in Charge :
24
-
-
... More
9.83 Providing and fixing aluminium dye cast tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg to 80 kg and door width from 700 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
4
-
-
... More
9.79.2 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.
9.79.2 50 mm
3
-
-
... More
9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)
9.1.2 Sal wood
1.46
-
-
... More
9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws
34.86
-
-
... More
9.20.3 25 mm thick (for cupboard) including ISI marked nickel
plated bright finished M.S. piano hinges with necessary screws
15.17
-
-
... More
9.31.1 Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, as per directions of Engineer-in-charge:
35 mm thick shutters
55.37
-
-
... More
9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge.
29.8
-
-
... More
9.120 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick,
20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in- charge, manufacturer's specification & drawing.
9.120.1 30 mm thick plain PVC door shutters
9.66
-
-
... More
M.S. WORK
10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
10.25.1 In stringers, treads, landings etc. of stair cases, including use of
chequered plate wherever required, all complete
1248.34
-
-
... More
10.30.1 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with
4.0 mm thick glass panes
41.01
-
-
... More
WATER PROOFING
22.7 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terracesetc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer- in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge..
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. SUB HEAD : 22- WATER PROOFING 1548
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum thickness at
khurra as 65 mm.
287.78
-
-
... More
22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4
hours followed with water curing for 48 hours.
The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
23.78
-
-
... More
FINISHING
13.5.2 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles not exceeding 80mm in girth and finished even and smooth (i) 1 cement: (iii) 1 cement: 6
coarse sand
13.5.2 1:3 (1 cement : 6 fine sand)
661.6
-
-
... More
13.4.2 12 mm cement plaster of mix: 1:6 (1 cement: 6 coarse sand)
ON INNER SURFACE
570.67
-
-
... More
13.16.1 1:3 (1 cement : 3 fine sand)
245.88
-
-
... More
13.21 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the
manufacturers.
54
-
-
... More
13.41 Distempering with oil bound washable distemper of approved
brand and manufacture to give an even shade :
13.41.1 New work (two or more coats) over and including water
thinnable priming coat with cement primer
816.55
-
-
... More
13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
New work (Two or more coats applied @ 1.43 ltr/10 sqm over
and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
661.6
-
-
... More
13.80 PProviding and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1478.15
-
-
... More
13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
13.61.1 Two or more coats on new work
102.32
-
-
... More
TILES AND STONE FLOORING WORK
11.13.1 Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick. (In Appron)
340.39
-
-
... More
11.39 Providing and laying antiskid rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
140.98
-
-
... More
11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. ( Size of Tile 600 x 600 mm)
140.16
-
-
... More
11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete
11.3.1 40 mm thick with 20 mm nominal size stone aggregate
101.61
-
-
... More
11.6 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.
11.6.1 18 mm thick
2.21
-
-
... More
11.56.1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent sqm 3908.80
83.29
-
-
... More
8.2 Providing and fixing 18mm thick gang saw cut ,mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size , approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.
8.2.2.2 Area of slab over 0.50 sqm.
6.48
-
-
... More
8.4 Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150mm with epoxy resin baesd adhesive including cleaning
etc. complete.
10.8
-
-
... More
8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite / stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
8
-
-
... More
TYPE-4
SANITARY
17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
17.2.2 W.C. pan with ISI marked black solid plastic seat and lid
4
-
-
... More
17.7 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required.
17.7.1 a)White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
4
-
-
... More
17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
17.28.1 Semi rigid pipe
17.28.1.1 32 mm dia
4
-
-
... More
17.31 Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
4
-
-
... More
CP Brass fittings
18.21 Providing and fixing unplasticised PVC connection pipe with brass unions
18.21.2 45 cm length
18.21.2.1 15 mm nominal bore
8
-
-
... More
17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean & Wall moutain type W.C. of quality and make as approved by Engineer - in -
charge.
4
-
-
... More
18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
18.49.1 a) 15 mm nominal bore
4
-
-
... More
18.53 Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931
18.53.1 a) 15 mm nominal bore
8
-
-
... More
17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (For bath)
15 mm diameter
2
-
-
... More
18.22 Providing and fixing C.P. brass shower rose with 15 or 20mm inlet
18.22.2 150 mm diameter
2
-
-
... More
18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931:
18.52.1 15mm nominal bore
4
-
-
... More
17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
4
-
-
... More
17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
6
-
-
... More
17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
17.73.1 450 mm long towel rail with total length of 495mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
6
-
-
... More
I C.I. SOIL WASTE & VENT PIPES AND FITTINGS
Providing & fixing soil, waste and vent pipes.
17.35.1.2 a) 100mm dia centrifugally cast iron S & S pipe.
10
-
-
... More
17.35.2.2 b) 75mm dia centrifugally cast iron S & S pipe.
20
-
-
... More
18.10 Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. ( for wash basin waste )
18.10.4 32mm dia nominal bore
12
-
-
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of
diameters.
17.58.1 a) 100mm
4
-
-
... More
17.58.2 b)75mm
5
-
-
... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate
20mm nominal size). Including cost of cutting holes & making good the walls etc.
17.37.1 a) for 100mm dia pipe.
3
-
-
... More
17.37.2 b) for 75mm dia pipe.
2
-
-
... More
Providing & fixing cast iron coller.
17.57.1.2 a) 100mm dia.
3
-
-
... More
17.57.2.2 b) 75mm dia.
2
-
-
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting
and making good the walls and floors :
17.60.1.1 a) 100mm inlet & 100mm outlet.
3
-
-
... More
17.60.2.1 a) 100mm inlet & 75mm outlet.
2
-
-
... More
Providing and fixing bend of required degree with
access door, insertion rubber washer 3mm thick, bolts and nuts complete.
17.38.1.2 a) 100mm
3
-
-
... More
17.38.2.2 b) 75mm
3
-
-
... More
Providing and fixing plain bend of required degree.
17.39.1.2 a) 100mm
3
-
-
... More
17.39.2.2 b) 75mm
3
-
-
... More
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
17.43.1.2 100x100x100mm
3
-
-
... More
17.43.2.2 75x75x75mm
3
-
-
... More
Providing and fixing centrifugaly cast iron single
equal plain junction of required degree.
17.44.1.2 100x100x100mm
3
-
-
... More
17.44.2.2 75x75x75mm
3
-
-
... More
Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :
17.47.1.2 100x100x75mm
3
-
-
... More
Providing and fixing single unequal plain invert
branch of required degree :
17.52.1.2 100x100x75mm
3
-
-
... More
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete :( c.o.p.)
17.55.1.2 a) 100mm
2
-
-
... More
17.55.2.2 b) 75mm
2
-
-
... More
Providing and fixing cast iron terminal guard.
17.56.1.2 100 mm
2
-
-
... More
17.56.2.2 75 mm
2
-
-
... More
III INTERNAL RAIN WATER DRAINAGE WORK
19.2.1 Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground)
110 mm dia
20
-
-
... More
12.41 Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.
12.41.2 110 mm
30
-
-
... More
12.42 Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.
12.42.5.2 Bend 87.5 degree
12.42.5.2 110 mm Bend
6
-
-
... More
12.42.6 Shoe (Plain)
12.42.6.2 110 mm Shoe
6
-
-
... More
12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
6
-
-
... More
12.43 Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the
wall etc. complete.
12.43.2 110 mm
10
-
-
... More
12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
6
-
-
... More
IV INTERNAL WATER SUPPLY WORKS
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.
Concealed work including cutting chases and
making good the walls etc.
18.8.2 20mm dia nominal outer dia pipes
18
-
-
... More
18.8.3 25mm dia nominal outer dia pipes
20
-
-
... More
18.8.4 32mm dia nominal outer dia pipes
8
-
-
... More
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and
making good walls etc. (internal work).
Internal work-Exposed on wall
18.10.1 15mm dia nominal bore
8
-
-
... More
18.10.2 20mm dia nominal bore
7
-
-
... More
18.10.3 25mm dia nominal bore
15
-
-
... More
18.10.4 32mm dia nominal bore
25
-
-
... More
18.10.5 40mm dia nominal bore
10
-
-
... More
18.10.6 50mm dia nominal bore
15
-
-
... More
Terrace and external work
18.12.7 65mm dia nominal bore
60
-
-
... More
18.12.8 80mm dia nominal bore
47
-
-
... More
Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both
of approved quality for new work.
18.38.1 15mm dia nominal bore
8
-
-
... More
18.38.2 20mm dia nominal bore
7
-
-
... More
18.38.3 25mm dia nominal bore
15
-
-
... More
18.38.4 32mm dia nominal bore
25
-
-
... More
Terrace and external work
18.40.7 65mm dia nominal bore
10
-
-
... More
18.40.8 80mm dia nominal bore
5
-
-
... More
Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work).
18.46.2 20mm dia nominal bore
3
-
-
... More
18.46.3 25mm dia nominal bore
5
-
-
... More
18.46.4 32mm dia nominal bore
2
-
-
... More
18.46.5 40mm dia nominal bore
3
-
-
... More
18.46.7 65mm dia nominal bore
3
-
-
... More
18.46.8 80mm dia nominal bore
1
-
-
... More
18.17 Providing and fixing gun metal gate valve with wheel of approved quality.
18.17.1A 20mm dia nominal bore
12
-
-
... More
18.17.1 25mm dia nominal bore
5
-
-
... More
18.17.2 32mm dia nominal bore
5
-
-
... More
18.17.3 40mm dia nominal bore
5
-
-
... More
18.17.4 50mm dia nominal bore
5
-
-
... More
18.17.5 65mm dia nominal bore
5
-
-
... More
18.17.6 80mm dia nominal bore
4
-
-
... More
18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats
complete :
18.18.3 25 mm nominal bore
1
-
-
... More
V INTERNAL SEWERAGE SYSTEM
2.10 Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed,
within a lead of 50m.
2.10.1 All kinds of soil
2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not
exceeding 300mm.
75
-
-
... More
19.1 Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
19.1.1 100mm diameter
35
-
-
... More
19.2 Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per standard design
19.2.1 100mm dia SW pipe
35
-
-
... More
19.6 Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints
etc. complete.
19.6.2 150 mm. dia. RCC Pipes
40
-
-
... More
19.3 Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design
19.3.2 150 mm. dia. RCC Pipes
40
-
-
... More
19.4 Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than
2.70 kg as per standard design
19.4.2 150 x 100 mm size P type
19.4.2.2 With Sewer bricks conforming to IS : 4885
4
-
-
... More
19.7 Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design.
19.7.1 Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and
weight of frame 15kg).
19.7.1.1 With FPS bricks of class designation 75
(i) For Sewer Line
6
-
-
... More
19.15 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm nominal size) as per
standard design
19.15.1 With 20x20 mm square bar
48
-
-
... More
TYPE-3
CIVIL
2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. 2.6.1 All kinds of soil
192.24
-
-
... More
2.35.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:
2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
100
-
-
... More
CONCRETE
4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
19.66
-
-
... More
4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
17.02
-
-
... More
4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly
soaked in kerosene oil.
17.02
-
-
... More
REINFORCED CEMENT CONCRETE
5.9 Centering and shuttering including strutting, propping etc. and removal of form for :
5.9.1 Foundations, footings, bases of columns, etc. for mass
concrete.
23.3
-
-
... More
5.9.3 Suspended floors, roofs, landings, balconies and access
platform.
84.23
-
-
... More
5.9.4 Shelves (Cast in situ)
3.34
-
-
... More
5.9.5 Lintels, beams, plinth beams, girders, bressumers and
cantilevers
198.02
-
-
... More
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts.
36.26
-
-
... More
5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
7300
-
-
... More
5.33 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland
/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
5.33.1.1 All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum
34.82
-
-
... More
5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum
2.11
-
-
... More
5.33.2.1 All works above plinth level upto floor V level. Concrete of M25 grade with minimum cement content of 330 kg /cum
25.18
-
-
... More
5.33.2.2 Concrete of M30 grade with minimum cement content of 350
kg /cum
3.64
-
-
... More
5.35 Add for using extra cement in the items of design mix over and
above the specified cement content therein.
39.45
-
-
... More
5.18.2 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. 40 mm Thick
10
-
-
... More
BRICK WORK
6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
15.69
-
-
... More
6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
FLOOR
40.33
-
-
... More
TERRACE
18.42
-
-
... More
6.13.1 Half brick masonry with common burnt clay (non modular) bricks of class- 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement : 3 coarse sand)
G. FLOOR
14.86
-
-
... More
TERRACE
9.9
-
-
... More
6.44 Brick edging 7cm wide 11.4cm. deep to plinth protection with
bricks of class designation 75 including grouting with cement mortar 1:4 (1 cement : 4 fine sand)
50.65
-
-
... More
DOOR WINDOW WORK
9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm
18
-
-
... More
9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
9.97.2 250X10 mm
9
-
-
... More
9.97.4 150X10 mm
45
-
-
... More
9.97.5 100X10 mm
4
-
-
... More
9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
9.100.1 125 mm
18
-
-
... More
9.100.2 100 mm
29
-
-
... More
9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
9.101.1 Single rubber stopper
4
-
-
... More
Providing and fixing door buffer of material stainless steel ISI marked with nuts and screws etc. complete as directed by
Engineer in Charge :
9
-
-
... More
9.83 Providing and fixing aluminium dye cast tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg to 80 kg and door width from 700 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
4
-
-
... More
9.79.2 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.
9.79.2 50 mm
3
-
-
... More
9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)
9.1.2 Sal wood
0.7
-
-
... More
9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws
11.87
-
-
... More
9.31.1 Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, as per directions of Engineer-in-charge:
35 mm thick shutters
22.47
-
-
... More
9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge.
9.9
-
-
... More
9.120 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick,
20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in- charge, manufacturer's specification & drawing.
9.120.1 30 mm thick plain PVC door shutters
3.15
-
-
... More
M.S. WORK
10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
10.25.1 In stringers, treads, landings etc. of stair cases, including use of
chequered plate wherever required, all complete
477.38
-
-
... More
10.30.1 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with
4.0 mm thick glass panes
22.03
-
-
... More
WATER PROOFING
22.7 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terracesetc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer- in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge..
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. SUB HEAD : 22- WATER PROOFING 1548
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum thickness at
khurra as 65 mm.
100.7
-
-
... More
22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4
hours followed with water curing for 48 hours.
The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
7.81
-
-
... More
FINISHING
13.5.2 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles not exceeding 80mm in girth and finished even and smooth (i) 1 cement: (iii) 1 cement: 6
coarse sand
13.5.2 1:3 (1 cement : 6 fine sand)
338.12
-
-
... More
13.4.2 12 mm cement plaster of mix: 1:6 (1 cement: 6 coarse sand)
ON INNER SURFACE
310.33
-
-
... More
13.16.1 1:3 (1 cement : 3 fine sand)
91.71
-
-
... More
13.21 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the
manufacturers.
27
-
-
... More
13.41 Distempering with oil bound washable distemper of approved
brand and manufacture to give an even shade :
13.41.1 New work (two or more coats) over and including water
thinnable priming coat with cement primer
402.07
-
-
... More
13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work
402.07
-
-
... More
13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
New work (Two or more coats applied @ 1.43 ltr/10 sqm over
and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
338.12
-
-
... More
13.80 PProviding and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
740.18
-
-
... More
13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
13.61.1 Two or more coats on new work
38.98
-
-
... More
TILES AND STONE FLOORING WORK
11.13.1 Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick. (In Appron)
159.55
-
-
... More
11.39 Providing and laying antiskid rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
36.57
-
-
... More
11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. ( Size of Tile 600 x 600 mm)
58.74
-
-
... More
11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete
11.3.1 40 mm thick with 20 mm nominal size stone aggregate
45.59
-
-
... More
11.6 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.
11.6.1 18 mm thick
6.22
-
-
... More
11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse
sand) :
11.26.1 25 mm thick
42.64
-
-
... More
8.2 Providing and fixing 18mm thick gang saw cut ,mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size , approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.
8.2.2.2 Area of slab over 0.50 sqm.
2.78
-
-
... More
8.4 Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150mm with epoxy resin baesd adhesive including cleaning
etc. complete.
10.63
-
-
... More
8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite / stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
3
-
-
... More
TYPE-3
SANITARY
17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
17.2.2 W.C. pan with ISI marked black solid plastic seat and lid
3
-
-
... More
17.7 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required.
17.7.1 a)White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
2
-
-
... More
17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
17.28.1 Semi rigid pipe
17.28.1.1 32 mm dia
2
-
-
... More
17.31 Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
2
-
-
... More
CP Brass fittings
18.21 Providing and fixing unplasticised PVC connection pipe with brass unions
18.21.2 45 cm length
18.21.2.1 15 mm nominal bore
5
-
-
... More
17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean & Wall moutain type W.C. of quality and make as approved by Engineer - in -
charge.
3
-
-
... More
18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
18.49.1 a) 15 mm nominal bore
3
-
-
... More
18.53 Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931
18.53.1 a) 15 mm nominal bore
5
-
-
... More
17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (For bath)
15 mm diameter
2
-
-
... More
18.22 Providing and fixing C.P. brass shower rose with 15 or 20mm inlet
18.22.2 150 mm diameter
2
-
-
... More
18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931:
18.52.1 15mm nominal bore
3
-
-
... More
17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
2
-
-
... More
17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
3
-
-
... More
17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
17.73.1 450 mm long towel rail with total length of 495mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
3
-
-
... More
I C.I. SOIL WASTE & VENT PIPES AND FITTINGS
Providing & fixing soil, waste and vent pipes.
17.35.1.2 a) 100mm dia centrifugally cast iron S & S pipe.
10
-
-
... More
17.35.2.2 b) 75mm dia centrifugally cast iron S & S pipe.
8
-
-
... More
18.10 Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. ( for wash basin waste )
18.10.4 32mm dia nominal bore
6
-
-
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of
diameters.
17.58.1 a) 100mm
2
-
-
... More
17.58.2 b)75mm
2
-
-
... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate
20mm nominal size). Including cost of cutting holes & making good the walls etc.
17.37.1 a) for 100mm dia pipe.
1
-
-
... More
17.37.2 b) for 75mm dia pipe.
2
-
-
... More
Providing & fixing cast iron coller.
17.57.1.2 a) 100mm dia.
2
-
-
... More
17.57.2.2 b) 75mm dia.
2
-
-
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting
and making good the walls and floors :
17.60.1.1 a) 100mm inlet & 100mm outlet.
2
-
-
... More
17.60.2.1 a) 100mm inlet & 75mm outlet.
2
-
-
... More
Providing and fixing bend of required degree with
access door, insertion rubber washer 3mm thick, bolts and nuts complete.
17.38.1.2 a) 100mm
2
-
-
... More
17.38.2.2 b) 75mm
2
-
-
... More
Providing and fixing plain bend of required degree.
17.39.1.2 a) 100mm
2
-
-
... More
17.39.2.2 b) 75mm
2
-
-
... More
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
17.43.1.2 100x100x100mm
1
-
-
... More
17.43.2.2 75x75x75mm
1
-
-
... More
Providing and fixing centrifugaly cast iron single
equal plain junction of required degree.
17.44.1.2 100x100x100mm
2
-
-
... More
17.44.2.2 75x75x75mm
2
-
-
... More
Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :
17.47.1.2 100x100x75mm
1
-
-
... More
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete :( c.o.p.)
17.55.1.2 a) 100mm
1
-
-
... More
17.55.2.2 b) 75mm
1
-
-
... More
Providing and fixing cast iron terminal guard.
17.56.1.2 100 mm
1
-
-
... More
17.56.2.2 75 mm
1
-
-
... More
III INTERNAL RAIN WATER DRAINAGE WORK
19.2.1 Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground)
110 mm dia
6
-
-
... More
12.41 Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.
12.41.2 110 mm
16
-
-
... More
12.42 Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.
12.42.5.2 Bend 87.5 degree
12.42.5.2 110 mm Bend
2
-
-
... More
12.42.6 Shoe (Plain)
12.42.6.2 110 mm Shoe
2
-
-
... More
12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
4
-
-
... More
12.43 Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the
wall etc. complete.
12.43.2 110 mm
6
-
-
... More
12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
4
-
-
... More
IV INTERNAL WATER SUPPLY WORKS
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.
Concealed work including cutting chases and
making good the walls etc.
18.8.2 20mm dia nominal outer dia pipes
8
-
-
... More
18.8.3 25mm dia nominal outer dia pipes
12
-
-
... More
18.8.4 32mm dia nominal outer dia pipes
6
-
-
... More
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and
making good walls etc. (internal work).
Internal work-Exposed on wall
18.10.2 20mm dia nominal bore
8
-
-
... More
18.10.3 25mm dia nominal bore
10
-
-
... More
18.10.4 32mm dia nominal bore
8
-
-
... More
18.10.5 40mm dia nominal bore
8
-
-
... More
18.10.6 50mm dia nominal bore
12
-
-
... More
Terrace and external work
18.12.7 65mm dia nominal bore
20
-
-
... More
18.12.8 80mm dia nominal bore
16
-
-
... More
Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both
of approved quality for new work.
18.38.2 20mm dia nominal bore
8
-
-
... More
18.38.3 25mm dia nominal bore
10
-
-
... More
18.38.4 32mm dia nominal bore
8
-
-
... More
Terrace and external work
18.40.7 65mm dia nominal bore
20
-
-
... More
18.40.8 80mm dia nominal bore
16
-
-
... More
Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work).
18.46.3 25mm dia nominal bore
3
-
-
... More
18.46.4 32mm dia nominal bore
2
-
-
... More
18.46.5 40mm dia nominal bore
2
-
-
... More
18.46.7 65mm dia nominal bore
1
-
-
... More
18.17 Providing and fixing gun metal gate valve with wheel of approved quality.
18.17.1A 20mm dia nominal bore
6
-
-
... More
18.17.1 25mm dia nominal bore
6
-
-
... More
18.17.2 32mm dia nominal bore
4
-
-
... More
18.17.3 40mm dia nominal bore
1
-
-
... More
18.17.5 65mm dia nominal bore
7
-
-
... More
18.17.6 80mm dia nominal bore
4
-
-
... More
18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats
complete :
18.18.3 25 mm nominal bore
1
-
-
... More
V INTERNAL SEWERAGE SYSTEM
2.10 Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed,
within a lead of 50m.
2.10.1 All kinds of soil
2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not
exceeding 300mm.
22
-
-
... More
19.1 Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
19.1.1 100mm diameter
10
-
-
... More
19.2 Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per standard design
19.2.1 100mm dia SW pipe
12
-
-
... More
19.6 Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints
etc. complete.
19.6.2 150 mm. dia. RCC Pipes
12
-
-
... More
19.3 Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design
19.3.2 150 mm. dia. RCC Pipes
12
-
-
... More
19.4 Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than
2.70 kg as per standard design
19.4.2 150 x 100 mm size P type
19.4.2.2 With Sewer bricks conforming to IS : 4885
4
-
-
... More
19.7 Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design.
19.7.1 Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and
weight of frame 15kg).
19.7.1.1 With FPS bricks of class designation 75
(i) For Sewer Line
4
-
-
... More
19.15 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm nominal size) as per
standard design
19.15.1 With 20x20 mm square bar
16
-
-
... More
TYPE-2
CIVIL
2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. 2.6.1 All kinds of soil
151.2
-
-
... More
2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.All kinds
of soil
BELOW GROUND 1.5 TO 3.0 M
25.2
-
-
... More
2.35.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:
2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
73.19
-
-
... More
CONCRETE
4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
15.1
-
-
... More
4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
14.09
-
-
... More
4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly
soaked in kerosene oil.
14.67
-
-
... More
REINFORCED CEMENT CONCRETE
5.9 Centering and shuttering including strutting, propping etc. and removal of form for :
5.9.1 Foundations, footings, bases of columns, etc. for mass
concrete.
12.48
-
-
... More
5.9.3 Suspended floors, roofs, landings, balconies and access
platform.
70.67
-
-
... More
5.9.4 Shelves (Cast in situ)
1.8
-
-
... More
5.9.5 Lintels, beams, plinth beams, girders, bressumers and
cantilevers
154.08
-
-
... More
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts.
60.32
-
-
... More
5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
7387
-
-
... More
5.33 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland
/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
5.33.1.1 All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum
27.87
-
-
... More
5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum
1.37
-
-
... More
5.33.2.1 All works above plinth level upto floor V level. Concrete of M25 grade with minimum cement content of 330 kg /cum
16.06
-
-
... More
5.33.2.2 Concrete of M30 grade with minimum cement content of 350
kg /cum
2.81
-
-
... More
5.35 Add for using extra cement in the items of design mix over and
above the specified cement content therein.
28.87
-
-
... More
BRICK WORK
6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
19.51
-
-
... More
6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
FLOOR
28.67
-
-
... More
TERRACE
19.82
-
-
... More
6.13.1 Half brick masonry with common burnt clay (non modular) bricks of class- 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement : 3 coarse sand)
G. FLOOR
8.1
-
-
... More
6.44 Brick edging 7cm wide 11.4cm. deep to plinth protection with
bricks of class designation 75 including grouting with cement mortar 1:4 (1 cement : 4 fine sand)
42.06
-
-
... More
DOOR WINDOW WORK
9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm
18
-
-
... More
9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
9.97.2 250X10 mm
9
-
-
... More
9.97.4 150X10 mm
25
-
-
... More
9.97.5 100X10 mm
4
-
-
... More
9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
9.100.1 125 mm
18
-
-
... More
9.100.2 100 mm
14
-
-
... More
9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
9.101.1 Single rubber stopper
4
-
-
... More
Providing and fixing door buffer of material stainless steel ISI marked with nuts and screws etc. complete as directed by
Engineer in Charge :
9
-
-
... More
9.83 Providing and fixing aluminium dye cast tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg to 80 kg and door width from 700 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
2
-
-
... More
9.79.2 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.
9.79.2 50 mm
2
-
-
... More
9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws
12.18
-
-
... More
9.20.3 25 mm thick (for cupboard) including ISI marked nickel
plated bright finished M.S. piano hinges with necessary screws
6.72
-
-
... More
9.31.1 Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, as per directions of Engineer-in-charge:
35 mm thick shutters
6.53
-
-
... More
9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge.
9.9
-
-
... More
9.120 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick,
20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in- charge, manufacturer's specification & drawing.
9.120.1 30 mm thick plain PVC door shutters
3.15
-
-
... More
M.S. WORK
10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
10.25.1 In stringers, treads, landings etc. of stair cases, including use of
chequered plate wherever required, all complete
294.25
-
-
... More
10.30.1 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with
4.0 mm thick glass panes
6.53
-
-
... More
10.5 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces
1.89
-
-
... More
WATER PROOFING
22.7 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terracesetc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer- in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge..
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. SUB HEAD : 22- WATER PROOFING 1548
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum thickness at
khurra as 65 mm.
95
-
-
... More
22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4
hours followed with water curing for 48 hours.
The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
2.97
-
-
... More
FINISHING
13.5.2 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles not exceeding 80mm in girth and finished even and smooth (i) 1 cement: (iii) 1 cement: 6
coarse sand
13.5.2 1:3 (1 cement : 6 fine sand)
267.47
-
-
... More
13.4.2 12 mm cement plaster of mix: 1:6 (1 cement: 6 coarse sand)
ON INNER SURFACE
240.24
-
-
... More
13.16.1 1:3 (1 cement : 3 fine sand)
92.7
-
-
... More
13.21 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the
manufacturers.
22
-
-
... More
13.41 Distempering with oil bound washable distemper of approved
brand and manufacture to give an even shade :
13.41.1 New work (two or more coats) over and including water
thinnable priming coat with cement primer
332.92
-
-
... More
13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
13.61.1 Two or more coats on new work
62.82
-
-
... More
TILES AND STONE FLOORING WORK
11.13.1 Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick. (In Appron)
329.38
-
-
... More
11.39 Providing and laying antiskid rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
15.01
-
-
... More
11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. ( Size of Tile 600 x 600 mm)
47.06
-
-
... More
11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete
11.3.1 40 mm thick with 20 mm nominal size stone aggregate
116.61
-
-
... More
11.6 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.
11.6.1 18 mm thick
23.32
-
-
... More
11.56.1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent sqm 3908.80
18.53
-
-
... More
8.2 Providing and fixing 18mm thick gang saw cut ,mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size , approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.
8.2.2.2 Area of slab over 0.50 sqm.
2.81
-
-
... More
8.4 Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150mm with epoxy resin baesd adhesive including cleaning
etc. complete.
2.94
-
-
... More
8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite / stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
2
-
-
... More
TYPE-2
SANITARY
17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
17.2.2 W.C. pan with ISI marked black solid plastic seat and lid
2
-
-
... More
17.7 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required.
17.7.1 a)White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
2
-
-
... More
17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
17.28.1 Semi rigid pipe
17.28.1.1 32 mm dia
2
-
-
... More
17.31 Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
2
-
-
... More
CP Brass fittings
18.21 Providing and fixing unplasticised PVC connection pipe with brass unions
18.21.2 45 cm length
18.21.2.1 15 mm nominal bore
4
-
-
... More
17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean & Wall moutain type W.C. of quality and make as approved by Engineer - in -
charge.
2
-
-
... More
18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
18.49.1 a) 15 mm nominal bore
2
-
-
... More
18.53 Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931
18.53.1 a) 15 mm nominal bore
4
-
-
... More
17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (For bath)
15 mm diameter
1
-
-
... More
18.22 Providing and fixing C.P. brass shower rose with 15 or 20mm inlet
18.22.2 150 mm diameter
1
-
-
... More
18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931:
18.52.1 15mm nominal bore
2
-
-
... More
17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
2
-
-
... More
17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
3
-
-
... More
17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
17.73.1 450 mm long towel rail with total length of 495mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
3
-
-
... More
I C.I. SOIL WASTE & VENT PIPES AND FITTINGS
Providing & fixing soil, waste and vent pipes.
17.35.1.2 a) 100mm dia centrifugally cast iron S & S pipe.
2
-
-
... More
17.35.2.2 b) 75mm dia centrifugally cast iron S & S pipe.
2
-
-
... More
18.10 Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. ( for wash basin waste )
18.10.4 32mm dia nominal bore
1
-
-
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of
diameters.
17.58.1 a) 100mm
2
-
-
... More
17.58.2 b)75mm
2
-
-
... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate
20mm nominal size). Including cost of cutting holes & making good the walls etc.
17.37.1 a) for 100mm dia pipe.
1
-
-
... More
17.37.2 b) for 75mm dia pipe.
2
-
-
... More
Providing & fixing cast iron coller.
17.57.1.2 a) 100mm dia.
2
-
-
... More
17.57.2.2 b) 75mm dia.
2
-
-
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting
and making good the walls and floors :
17.60.1.1 a) 100mm inlet & 100mm outlet.
3
-
-
... More
17.60.2.1 a) 100mm inlet & 75mm outlet.
3
-
-
... More
Providing and fixing bend of required degree with
access door, insertion rubber washer 3mm thick, bolts and nuts complete.
17.38.1.2 a) 100mm
2
-
-
... More
17.38.2.2 b) 75mm
2
-
-
... More
Providing and fixing plain bend of required degree.
17.39.1.2 a) 100mm
2
-
-
... More
17.39.2.2 b) 75mm
2
-
-
... More
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
17.43.1.2 100x100x100mm
2
-
-
... More
17.43.2.2 75x75x75mm
1
-
-
... More
Providing and fixing centrifugaly cast iron single
equal plain junction of required degree.
17.44.1.2 100x100x100mm
2
-
-
... More
17.44.2.2 75x75x75mm
2
-
-
... More
Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :
17.47.1.2 100x100x75mm
2
-
-
... More
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete :( c.o.p.)
17.55.1.2 a) 100mm
3
-
-
... More
17.55.2.2 b) 75mm
3
-
-
... More
Providing and fixing cast iron terminal guard.
17.56.1.2 100 mm
2
-
-
... More
17.56.2.2 75 mm
2
-
-
... More
III INTERNAL RAIN WATER DRAINAGE WORK
19.2.1 Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground)
110 mm dia
5
-
-
... More
12.41 Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.
12.41.2 110 mm
16
-
-
... More
12.42 Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.
12.42.5.2 Bend 87.5 degree
12.42.5.2 110 mm Bend
4
-
-
... More
12.42.6 Shoe (Plain)
12.42.6.2 110 mm Shoe
4
-
-
... More
12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
4
-
-
... More
12.43 Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the
wall etc. complete.
12.43.2 110 mm
4
-
-
... More
12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
4
-
-
... More
IV INTERNAL WATER SUPPLY WORKS
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.
Concealed work including cutting chases and
making good the walls etc.
18.8.2 20mm dia nominal outer dia pipes
8
-
-
... More
18.8.3 25mm dia nominal outer dia pipes
12
-
-
... More
18.8.4 32mm dia nominal outer dia pipes
8
-
-
... More
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and
making good walls etc. (internal work).
Internal work-Exposed on wall
18.10.1 15mm dia nominal bore
8
-
-
... More
18.10.2 20mm dia nominal bore
10
-
-
... More
18.10.3 25mm dia nominal bore
8
-
-
... More
18.10.4 32mm dia nominal bore
4
-
-
... More
18.10.5 40mm dia nominal bore
12
-
-
... More
18.10.6 50mm dia nominal bore
1
-
-
... More
Terrace and external work
18.12.7 65mm dia nominal bore
15
-
-
... More
18.12.8 80mm dia nominal bore
13
-
-
... More
Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both
of approved quality for new work.
18.38.1 15mm dia nominal bore
8
-
-
... More
18.38.2 20mm dia nominal bore
10
-
-
... More
18.38.3 25mm dia nominal bore
8
-
-
... More
18.38.4 32mm dia nominal bore
4
-
-
... More
Terrace and external work
18.40.7 65mm dia nominal bore
5
-
-
... More
Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work).
18.46.1 15mm dia nominal bore
4
-
-
... More
18.46.2 20mm dia nominal bore
2
-
-
... More
18.46.3 25mm dia nominal bore
2
-
-
... More
18.46.4 32mm dia nominal bore
2
-
-
... More
18.46.5 40mm dia nominal bore
2
-
-
... More
18.46.7 65mm dia nominal bore
1
-
-
... More
18.17 Providing and fixing gun metal gate valve with wheel of approved quality.
18.17.1A 20mm dia nominal bore
4
-
-
... More
18.17.1 25mm dia nominal bore
3
-
-
... More
18.17.2 32mm dia nominal bore
2
-
-
... More
18.17.3 40mm dia nominal bore
1
-
-
... More
18.17.4 50mm dia nominal bore
2
-
-
... More
18.17.5 65mm dia nominal bore
3
-
-
... More
18.17.6 80mm dia nominal bore
1
-
-
... More
18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats
complete :
18.18.3 25 mm nominal bore
1
-
-
... More
V INTERNAL SEWERAGE SYSTEM
2.10 Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed,
within a lead of 50m.
2.10.1 All kinds of soil
2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not
exceeding 300mm.
16
-
-
... More
19.1 Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
19.1.1 100mm diameter
8
-
-
... More
19.2 Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per standard design
19.2.1 100mm dia SW pipe
8
-
-
... More
19.6 Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints
etc. complete.
19.6.2 150 mm. dia. RCC Pipes
8
-
-
... More
19.3 Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design
19.3.2 150 mm. dia. RCC Pipes
8
-
-
... More
19.4 Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than
2.70 kg as per standard design
19.4.2 150 x 100 mm size P type
19.4.2.2 With Sewer bricks conforming to IS : 4885
3
-
-
... More
19.7 Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design.
19.7.1 Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and
weight of frame 15kg).
19.7.1.1 With FPS bricks of class designation 75
(i) For Sewer Line
4
-
-
... More
19.15 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm nominal size) as per
standard design
19.15.1 With 20x20 mm square bar
40
-
-
... More
U.G. TANK
2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. 2.6.1 All kinds of soil
565
-
-
... More
2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.All kinds
of soil
BELOW GROUND 1.5 TO 3.0 M
2308.75
-
-
... More
CONCRETE
4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
10.76
-
-
... More
REINFORCED CEMENT CONCRETE
5.9 Centering and shuttering including strutting, propping etc. and removal of form for :
5.9.1 Foundations, footings, bases of columns, etc. for mass
concrete.
19.2
-
-
... More
5.9.2 Walls (any thickness) including attached pilasters, butteresses,
plinth and string courses etc.
270.81
-
-
... More
5.9.3 Suspended floors, roofs, landings, balconies and access
platform.
100.67
-
-
... More
5.9.5 Lintels, beams, plinth beams, girders, bressumers and
cantilevers
29.47
-
-
... More
5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
9304
-
-
... More
5.33 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland
/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
5.33.1.1 All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum
23.73
-
-
... More
6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
FLOOR
10.3
-
-
... More
M.S. WORK
10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
10.25.1 In stringers, treads, landings etc. of stair cases, including use of
chequered plate wherever required, all complete
186.36
-
-
... More
22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4
hours followed with water curing for 48 hours.
The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
268.8
-
-
... More
FINISHING
13.5.2 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles not exceeding 80mm in girth and finished even and smooth (i) 1 cement: (iii) 1 cement: 6
coarse sand
13.5.2 1:3 (1 cement : 6 fine sand)
66.09
-
-
... More
13.4.2 12 mm cement plaster of mix: 1:6 (1 cement: 6 coarse sand)
ON INNER SURFACE
157.32
-
-
... More
13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work
66.09
-
-
... More
13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
New work (Two or more coats applied @ 1.43 ltr/10 sqm over
and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
215.98
-
-
... More
13.80 PProviding and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
282.08
-
-
... More
13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
13.61.1 Two or more coats on new work
31.06
-
-
... More
TILES AND STONE FLOORING WORK
11.13.1 Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick. (In Appron)
329.38
-
-
... More
11.39 Providing and laying antiskid rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
15.01
-
-
... More
11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. ( Size of Tile 600 x 600 mm)
47.06
-
-
... More
11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete
11.3.1 40 mm thick with 20 mm nominal size stone aggregate
116.61
-
-
... More
11.6 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.
11.6.1 18 mm thick
23.32
-
-
... More
11.56.1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent sqm 3908.80
18.53
-
-
... More
8.2 Providing and fixing 18mm thick gang saw cut ,mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size , approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.
8.2.2.2 Area of slab over 0.50 sqm.
2.81
-
-
... More
8.4 Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150mm with epoxy resin baesd adhesive including cleaning
etc. complete.
2.94
-
-
... More
8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite / stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
2
-
-
... More
ROAD WORK
16.1 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of
surplus earth with lead upto 50 metres.
1890
-
-
... More
4.1.8 Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8 graded stone aggregate 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.
283.5
-
-
... More
16.78.1 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
283.5
-
-
... More
16.43.1 Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction / expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-incharge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).
Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less
cement used as per design mix is payable/ recoverable separately. Cement concrete prepared with batch mixing machine
270
-
-
... More
5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo- Mechanically Treated bars of grade Fe-500D or more.
10597.5
-
-
... More
16.45 Providing and fixing in position pre-moulded joint filler in expansion joints.
1800
-
-
... More
16.46 Providing and laying in position bitumen hot sealing compound for expansion joints etc.
16.46.1 Using grade 'A' sealing compound.
2160
-
-
... More
16.47.1 Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-incharge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign mater;al etc. and lining out complete.
New work (Two or more coats)
90
-
-
... More
16.69 Providing and laying at or near ground level factory made kerb stone of M25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in- charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
36
-
-
... More
13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
Two or more coats on new work
252
-
-
... More
16.59 Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D- 4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Back side of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer--in-
charge.
16.59.1 Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm
2
-
-
... More
16.59.2 Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm
2
-
-
... More
PATHWAY & PARKING
4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).
110.2
-
-
... More
6.1.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
69.6
-
-
... More
13.4.1 12 mm cement plaster of mix : 1 cement: 6 C. sand.
266.8
-
-
... More
16.68 Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
649.6
-
-
... More
HORTICULTURE & LANDSCAPING
2.2 Supplying and stacking of good earth at site including royalty and carriage upto 5 km (earth measured in stacks will be reduced by 20% for payment).
35
-
-
... More
2.4 Supplying and stacking at site dump manure from approved source, including carriage upto 1 km (manure measured in stacks will be reduced by 8% for payment)
2.4.1 Screened through sieve of I.S. designation 20mm
102
-
-
... More
2.9 Mixing earth and sludge or manure in proportion specified or directed.
137
-
-
... More
2.10 Grassing with selection No. 1/Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if needed (the grass and good earth shall be paid for separately).
2.10.1 In rows 5 cm apart in either direction.
2148
-
-
... More
2.35 Supplying & Stacking of Selection No.1/doob grass at site fresh & free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.
2148
-
-
... More
2.13 Preparation of beds for hedging and shrubbery by excavating 60cm deep and trenching the excavated base to a further depth of 30cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, with in a lead of
50 m, lift upto 1.5 m complete.
73
-
-
... More
2.16 Providing and fixing M.S flat iron tree guard 6 cm dia and 2 m high, above ground consisting 4 nos 25X6 mm, 2.25 m long and 8 nos 25X3 mm 2m long verticals M.S flats, riverted to 3 nos 25X 6 mm M.S flat iron rings in two halves, fixing together at site with required six numbers of 8 mm dia and 30 mm long bolts, including painting twocoats with synthetic enemal paint of approved brand and manufacture over a coat of primer. One name plate of 1 mm thick M.S. sheet of size 250X100 mm shall be welded to the tree guard near the middle height and lettered CPWD/PWD/any other approved name. The tree guard shall be suitably fixed to the ground by embedding four les of tree guard in pits of suitrable dia and to a depth of 25 cm, refilling the pits with soil and ramming, complete in all respect as per satisaction and direction of officer-n-charge.
40
-
-
... More
2.30.1 Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding
20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of
50 m and lift upto 1.5 m.
All kinds of soil
60
-
-
... More
5.20 Providing and Displaying Ficus black vivion piller Topairy (sylinder type) well developed with fresh & healthy 180 to 210 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge.
10
-
-
... More
5.22 Providing and Displaying Ficus Nuda Topairy well developed with fresh & healthy 5 to 6 big ball specific size and shape 180to 210cm ht in 40 cm Cement Pot as per direction of the officer-in-charge.
10
-
-
... More
5.27 Providing and Displaying Ficus resnold Topairy well developed with fresh & healthy 6 to 7 big ball specific size 210 to 240 cm ht in 45 cm Cement Pot as per direction of the officer-incharge.
10
-
-
... More
Detail of tree
Raphis palm 3' - 4' height
30
-
-
... More
Foxtail palm 8' - 10' height
30
-
-
... More
Tabebuia 2'-3' ht
30
-
-
... More
Palm cycas Revolura 2"-3" dia
30
-
-
... More
Golden duranta ( hedge )
40
-
-
... More
Toparies height 5 - 6 ' height
Golden bottle brush
20
-
-
... More
Casurina
10
-
-
... More
Ficus Resonalt
20
-
-
... More
Areca palm 4' - 5' height
20
-
-
... More
Draceana varieties
20
-
-
... More
Croton varities
20
-
-
... More
Deffenbachia
20
-
-
... More
Aglonema
20
-
-
... More
Money plant with moss stick 3' height
15
-
-
... More
Syngonium with moss stick 3' height
20
-
-
... More
Oxycodium with moss stick 3' height
20
-
-
... More
Fishtail palm
8
-
-
... More
Champagne palm 1 - 2 m folliage
5
-
-
... More
Anar (30) 2-7 m folliage
5
-
-
... More
Chiku (24) 3 -8m folliage
5
-
-
... More
Mango (24) 3 -8m folliage
5
-
-
... More
SHRUS (have several woody item)
Coral Hibiscus 2'-3' ht
30
-
-
... More
Massanda Pink 2'-3' ht
30
-
-
... More
Kachnar 5'-6' ht
30
-
-
... More
Bottle Brush 5'-6' ht
30
-
-
... More
Ixora 2'-3' ht
30
-
-
... More
Ficus black Tapori 3'-4' ht
30
-
-
... More
Ficus Prestige Boll 3'-4' ht
30
-
-
... More
Hamelia 2'-3' ht
30
-
-
... More
Ground edging Plant
Eranthemum
40
-
-
... More
Verbena
40
-
-
... More
Setcreasea
40
-
-
... More
Verbena Mix
40
-
-
... More
SS planter 18'' dia
80
-
-
... More
Electrical Lawn mover power Grass cutter & power
weed shear
1
-
-
... More
BOUNDARY WALL
2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. 2.6.1 All kinds of soil
439.13
-
-
... More
CONCRETE
4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
26.28
-
-
... More
4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
72.43
-
-
... More
REINFORCED CEMENT CONCRETE
5.9 Centering and shuttering including strutting, propping etc. and removal of form for :
5.9.1 Foundations, footings, bases of columns, etc. for mass
concrete.
179.45
-
-
... More
5.9.5 Lintels, beams, plinth beams, girders, bressumers and
cantilevers
377.88
-
-
... More
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts.
729.11
-
-
... More
5.9.17 Cornices and mouldings
62.98
-
-
... More
5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
13693.51
-
-
... More
5.33 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland
/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
5.33.1.1 All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum
67.51
-
-
... More
5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum
30.82
-
-
... More
6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
FLOOR
162.96
-
-
... More
10.1 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. kg 93.05
1574.5
-
-
... More
13.4.2 12 mm cement plaster of mix: 1:6 (1 cement: 6 coarse sand)
ON INNER SURFACE
1797.85
-
-
... More
13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
New work (Two or more coats applied @ 1.43 ltr/10 sqm over
and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
1797.85
-
-
... More
13.80 PProviding and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1797.85
-
-
... More
5.29 Providing and fixing sheet covering over expansion joints with iron screws as per design.
5.29.2 Aluminium fluted strips 3.15 mm thick. 5.29.2.2 200 mm wide metre 685.10
61.8
-
-
... More
SEWERAGE AND DRAINAGE SYSTEM
10.1.2 Excavating trenches of required width for pipe, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc, and disposing of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
300
-
-
... More
19.2.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:
150 mm diameter S.W. pipe
300
-
-
... More
19.1.2 Providing, laying and jointing glazed stoneware pipes class SP-I with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of oints etc. complete :
150 mm diameter
300
-
-
... More
19.4 Providing and fixing square-mouth S.W. gully trap class SP-I complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design
19.4.2 150 x 100 mm size P type
19.4.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
23
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) . 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15kg)
19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
45
-
-
... More
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4(1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C, horizontal gratin with frame complete as per standard design:
19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
45
-
-
... More
19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of Joints etc. complete
19.6.2 150 mm diameter
340
-
-
... More
19.16 Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
342
-
-
... More
RAIN WATER HARVESTING
23.1 Boring/ Drilling bore well of required dia for casing strainer pipe by sutable method prescribed in IS 2800(Part I), Inculding collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools , plants & machineries required for the job, all complete as per direction of engineer-in- charge , upto 90 metre depth below ground level
23.1.1 All type of soil
23.1.1.1.1 300mm dia
270
-
-
... More
23.1.2 Rocky stratra including boulders 300 dia
23.1.2.1 300mm dia
90
-
-
... More
23.3 Supplying , assembling, lowering and fixing in vertical postion in boro well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS 12818, including required hire and labour charges, fitting & accessories etc. all complete for all depths as per direction of engineer in charge
23.3.2 150mm dia nominal size dia
360
-
-
... More
23.4 Supplying assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well. screen (RMS) pipes with ribs, conforming to IS, 12818, including hire & labour charges, fittings accessories etc, all complete for all depths as per direction of engineer-in-charge. 150mm nominal size dia.
23.4.2 150mm dia nominal size dia
360
-
-
... More
23.5 Supply, filling, spreading & leveling stone boulders of size range 5cm to 20cm, in recharge pit, thickness, for all leads and lifts, all complete as per direction Engineer in charge.
30
-
-
... More
23.8 Gravel packing in tube well construction in accordance with IS 4097, including providing graval fine/medium coarse, in required grading & sizes as per actual requirement , all complete as per direction of engineer in charge
30
-
-
... More
2.25 Filling available excavated earth ( Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and water. Lead up to 50 m and lift upto 1.5 m.
540
-
-
... More
2.26.1 Extra for every addition lift of 1.5 m or part thereof in excavation/ banking excavated or stacked materials. All kinds of soil.
60
-
-
... More
19.3.1 Providing and fixing in position pre-cast RCC manhole covers and frame of required shape and approved quality H D - 20 Circular shape 560 mm internal diameter
3
-
-
... More
23.13 Providing and fixing suitable size threaded mild steel cap or shot welded plate to the top of borewell housing chasing pipe as per removable as per requirement, all complete for borewell of: 23.13.3 200mm dia
3
-
-
... More
23.15 Providing and fixing Bail plug/Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (Part-I) .
23.15.2 150mm dia
3
-
-
... More
19.16 Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS:10910, on 12mm dia steel bar conforming to IS: 1786, having minimum cross section as 23mm X 25mm and over all minimum length 263mm and width as 165mm with minimum 112 mm space between protruded legs having 2mm tread on top surface by ribbing or chequiring besides necessary and adequate anchoring projection on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance identification mark to be visible even after fixing, including fixing manhole with cement concrete block 1:3:6(1 cement: 3 Coarse sand: 6 graded stone aggregrate 20mm nominal size) complete as per design
30
-
-
... More
19.7.2.1 Constructing brick masonry manhole (silt chamber type) inside size 1.20X 0.90c 1.20m deep with FPS brick class designation 75 in cement mortar 1:4 (1 Cement: 4 coarse sand) 15mm thick RCC top slab with 500mm dia opening in cement concrete (1 cement: 2 C/sand: 4 graded stone agg, n/size reinforced with 18.92 kg cold twisted sreel bars 20cm foundation concrete 1:4:8 (1 cement: 4 C/sand: 8 graded stone agg 40mm size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 C/sand) finished with a foating coat of neat cement and providing 75 mm thick bed concrete in 1:2:4 mix (1 cement: 2 C/sand: 4 graded stoneagg . 20mm n/size) including neat cement punning inside the manhole complete as per standard design/depth shall be measured from invert level of manhole excluding cost of manhole cover and frame which shall be paid for separately etc. All complete as per direction of engineer-incharge.
3
-
-
... More
19.8.2.1 Extra for depth for manhole size ( 120cmx90cm) with common burnt clay F.P.S ( nonmodular) bricks of class designation 7.5
3
-
-
... More
1.1.2 Carriage of Material by mechanical transport including loading ,unloading etc. Complete lead 1 km the place of disposal shall be approved by the engineer-in- charge
300
-
-
... More
4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of cantering and shuttering - All work upto plinth level 1:5:10 (1 Cement: 5 coarse sand: 10 graded stone aggregate 40mm niminal size)
1.08
-
-
... More
4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of cantering and shuttering - All work upto plinth level 1:2:4(1 Cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size)
1.08
-
-
... More
BOREWELL
23.1 Boring/drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS:2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer- in-charge, upto 90 metre depth below ground level.
23.1.2 Rocky strata including Boulders 23.1.2.1 300mm dia
180
-
-
... More
23.2 Boring/drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS:2800 (part l), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer - in-charge, beyound 90 metre & upto 150 metre depth below groung level.
23.2.2 Rocky strata including Boulders
23.2.1 300mm dia
120
-
-
... More
18.12.7 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 18.12.7 65 mm dia. nominal bore
150
-
-
... More
23.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer in charge
23.3.2 150 mm nominal size dia
140
-
-
... More
23.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs conforming to IS: 12818, including hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer in charge
23.4.2 150 mm nominal size dia
100
-
-
... More
23.8 Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sites as per actual requirement, all complete as per direction of Engineer- in -charge.
25
-
-
... More
23.12 Development of tube well in accordance with IS : 2800 (part l) and IS:11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-incharge.
12
-
-
... More
23.13 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
23.13.3 200 mm dia
2
-
-
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part l), including necessary bolts & nuts of required size complete. 23.14.2 150 mm clamp
2
-
-
... More
23.15 Providing and fixing bail plug / bottom plug of required dia at the bottom of the pipe assambley as per IS: 2800 (Part-I).
23.15.2 150 mm dia
2
-
-
... More
MR-1 Supply, installation testing & commissioning of submersible pumping set suitable to operate on 410 volts 3 phase 50 HZ A.C. power supply including water proof joint free cable, motor control panel, 50 mm dia, G.I. pipe (medium class) column with fittings, clamps etc. complete in all respect as per details given below : (For Borewell)
2
-
-
... More
EXTENAL WATER SUPPLY
2.10 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m .
2.10.1 All kind of soil
2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia.
200
-
-
... More
18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
18.9.6 50 mm nominal outer dia Pipes
200
-
-
... More
18.7 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
18.17.4 50 mm nominal bore
20
-
-
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :
18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
2
-
-
... More
Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design
18/.37.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
2
-
-
... More
18.60.1 Providing and fixing enclosed type water meter (bulk type) conforming to IS 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately
18.60.1 80 mm dia nominal bore
1
-
-
... More
18.61.1 Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 :
80 mm dia
1
-
-
... More
SEWERAGE TREATMENT PLANT
MR-2 Supply, installation, Testing and commissioning of Sewage Treatment Plant based on attached growth technology using the 'Moving Aerated Bio-media Reactor' (MBBR) process complete mechanical and electrical items with stand by pumps as mentioned
below for STP
1
-
-
... More
ELECTRIFICATION
Electrical
1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(GROUP C)
1046
-
-
... More
1.55 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
1.55.3 Group C
1163
-
-
... More
1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed pvc conduit as required.
1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
3150
-
-
... More
1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
5402
-
-
... More
1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
1080
-
-
... More
1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire
198
-
-
... More
1.14.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire
198
-
-
... More
1.14.6 2 X 16 sq. mm + 1 X 6 sq. mm earth wire
30
-
-
... More
1.14.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire
354
-
-
... More
1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire
108
-
-
... More
1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire
1050
-
-
... More
MR 4 X 25 sq. mm + 2 X 10 sq. mm earth wire
800
-
-
... More
1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
254
-
-
... More
1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socke outlet and 15/16 A modular switch, connections etc. as required.
204
-
-
... More
2.18 Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
91
-
-
... More
2.20 Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top along with 30 amps "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
11
-
-
... More
MR Supplying and fixing 63 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top along with 63 amps "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
3
-
-
... More
1.20 Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required
1.20.2 25mm dia conduit
1542
-
-
... More
1.20.3 32mm dia conduit
611
-
-
... More
1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
20mm dia conduit
1595
-
-
... More
1.21.2 25mm dia conduit
1595
-
-
... More
1.21.3 32mm dia conduit
456
-
-
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
46
-
-
... More
Telephone wire
1.38 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
1.18.1 2 Pair
2600
-
-
... More
1.18.2 4 Pair
303
-
-
... More
1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
705
-
-
... More
Extra Modular switch/socket outlet
1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 A switch
14
-
-
... More
1.24.1 2 way 5/6 A switch
14
-
-
... More
1.24.3 15/16 A switch
14
-
-
... More
1.24.4 3 pin 5/6 A socket outlet
14
-
-
... More
1.24.5 6 pin 15/16 A socket outlet
14
-
-
... More
1.24.6 Telephone socket outlet
101
-
-
... More
1.24.7 TV antenna socket outlet
24
-
-
... More
Providing, laying, connecting and testing of multi-core telephone armoured cable of conductor size 0.63mm dia annealed copper conductor PVC insulated PVC sheathed jelly filled (as per DOT specification) cable along wall or ceiling or
through existing pipe
20 Pair telephone cable
205
-
-
... More
10 Pair telephone cable
605
-
-
... More
100 Pair telephone cable
135
-
-
... More
Providing, fixing connecting and testing of under noted size of solderless telephone tag block Krone make in surface/recess in wall required size of M.S.
box with hinged lockable cover duly stove enamel painted.
10 pair tag block
12
-
-
... More
20 pair tag block
5
-
-
... More
100 pair tag block
2
-
-
... More
Extra GI box along with modular base and cover plate
1.27 Supplying and fixing following size/modules, GI box along with modular base and cover plate for modular switches in recess etc. as required.
1.27.1 1 or 2 Module (75mm x 75mm)
122
-
-
... More
1.27.2 3 Module (100mmX75mm)
15
-
-
... More
1.27.3 4 Module (125mmX75mm)
15
-
-
... More
1.27.4 6 Module (200mmX75mm)
15
-
-
... More
1.27.5 8 Module (125mmX125mm)
15
-
-
... More
1.27.6 12 Module (200mmX150mm)
25
-
-
... More
1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
187
-
-
... More
Down Lighter
Supply and fixing of recess/ Surface/ Pendent mounting round 6 Watt 8 Watt LED
Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.(CAT AAA)
58
-
-
... More
SITC of LED Wall bracket Luminaire with E27 base lamp holder suitable for LED bulb of wattage 12W with chrome lamp cup. Similar to Wipro LM91 or equivalent
48
-
-
... More
Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED
Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.(CAT AAA)
130
-
-
... More
Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.(CAT AAA)
216
-
-
... More
For Double height
Supply and fixing of recess/surface mounting round 24 Watt to 32 Watt LED Down Lighter having Powder coated die cast aluminium housing with extended heat sink, diffuser/ Reflector and driver set completed in all respects.(CAT AAA)
37
-
-
... More
2'X2' Square Fittings
Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set
complete in all respect.(CAT AAA)
250
-
-
... More
LED Tube Light
Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect.
162
-
-
... More
Supply and fixing of LED Tube Light with batten suitable for up to 2 X 22 watt LED tube light fitting including tube on Surface complete in all respect.
67
-
-
... More
Supply and fixing of water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in all respect.
41
-
-
... More
Supply and fixing of Single LED light wall bracket 3 to 6 Watt on matching M.D.F.E.G Board base etc. complete in all respect.
22
-
-
... More
Supply and fixing of 3 Watt LED Path / Walkover luminaire having powder cotated die cast aluminium body with drive set . Confirming to IP 65 Protection complete in all respect.CAT-AAA
27
-
-
... More
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 70 to 90 Watt. Confirming to IP 65
protection complete in all respect.(CAT - AAA)
22
-
-
... More
Supply and fixingof Mirror Wall Light oblong 10 Watt LED luminaire with driver set confirming to IP 65 and above Protection . complete in all respectsimilar to Philips model No. BN021 LED 10S.
43
-
-
... More
Supply, installation, connecting, testing and commissioning of illuminated exit sign with 1 x 6 watt LED lamp including providing maintenance free batteries & charger capable of working for 2 hr duration mounted on ceiling/wall complete with the approved EXIT self adhesive labels as per site requirement as required including connection with 1.5 sqmm FRLS PVC insulated copper conductor similar to Prolite or equivalent
12
-
-
... More
Supply & installation LED cove strip 5 Meter length similar to philips Cat No. LED Strip SKYCove 5M WW with copper wiring for looping
10
-
-
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
302
-
-
... More
Supplying, erection, connecting, testing and commissioning of 750 mm wall circulating fan complete in all respect including fixing wiring connection etc Similar to Usha Dominaire
5
-
-
... More
Supplying, erection, connecting, testing and commissioning of 400 mm wall fan complete in all respect including fixing wiring connection etc Similar to havells Platina
5
-
-
... More
Supplying, erection, connecting, testing and commissioning of following size exhaust fan complete with gravity louver and connection with 3 core flexible wire as required.
380mm 900 RPM
7
-
-
... More
450mm 900 RPM
39
-
-
... More
Supply and fixing of single unit LED aviation obstruction light complete with
transformer and LED spiral etc complete in all respect..(CAT AAA)
5
-
-
... More
Erection and testing of ceiling fan and regulator for room height upto 3.5 metres including supply of 3mm thick G.I.Pipe19mm dia. Duly painted, complete in all respect.
302
-
-
... More
Add extra to item (1116) for 15cm or part thereof for room height from 3.5 to 5.00 metres.
302
-
-
... More
Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts, nuts and washers etc., complete in all respect.
46
-
-
... More
Making hole in the wall for exhaust fan and finishing properly complete in all respect.
46
-
-
... More
Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.
302
-
-
... More
Supplying and fixing M.S. box with Phenolic laminate plate 4- way splitter box for TV antenna complete as required.
7
-
-
... More
Supplying and fixing of 450 x 450 x 150 M.S. box with Phenolic laminate plate of 16 SWG M.S. Sheet with hinged door cover for mounting TV amplifier including wooden base plate complete as required.
49
-
-
... More
SPN DB
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
2.3.1 6 way , Double door
5
-
-
... More
2.3.2 8 way , Double door
5
-
-
... More
2.3.3 12 way , Double door
1
-
-
... More
TPN DB
Supplying and fixing of following ways,horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess ,complete with tinned copper bus bar, neutral link, earth bar, din bar,interconnections, powder painted including earthing etc. as required. ( But without MCB/RCCB/Isolator)
4 way Double door
8 way Double door
26
-
-
... More
VTPN DB
Supplying and fixing of following ways surface/ recess mounting, vertical
type, 415 V, TPN MCCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs/MCCB and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
12 way Double door
38
-
-
... More
2.17 Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V "C" curve TP MCB complete with
connections, testing and commissioning etc. as required.
25
-
-
... More
2.11 Supplying and fixing single pole blanking plate in the existing
MCB DB complete etc. as required.
44
-
-
... More
DP MCB as DB I/c
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as
required.
2.12.1 40 amps
5
-
-
... More
2.12.2 63 amps
6
-
-
... More
FP MCB as DB I/c
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2.13.2 63 A
26
-
-
... More
2.2 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
2.2.1 S & F 100 amp. FP MCCB (16KA) Thermal Magnetic Release
19
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2.10.1 Single pole
2007
-
-
... More
2.10.4 Triple pole
49
-
-
... More
2.14 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required
2.14.1 25 A
5
-
-
... More
2.14.2 40 A
74
-
-
... More
2.14.3 63 A
4
-
-
... More
2.14 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required
2.14.1 25 A
5
-
-
... More
2.14.2 40 A
44
-
-
... More
2.14.3 63 A
21
-
-
... More
Supplying, installation, testing and commissioning of cubical type MV Panel made out of 14 SWG CRCA sheet steel, totally enclosed IP-54 protection, free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 100mmx50mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switch gears
NOTE:
All MCCBs shall have Ics=Icu=100%
MCB Should be connected throught terminal Strip of suitable rating
All outgoing MCCB feeders shall have ON/OFF Trip indication lights (LED Type)
Panel Specification as stated above (ADMIN LIGHT & POWER PANEL)
Incomer
2 Nos.1000 A FP ACB (50 KA)
2 Set phase indication lights (R, Y, B)
2 No. Volt Meter (digital type) with inbuilt VSS & control fuses.
2 No. 0-1000Amp. Ammeter (digital type) with inbuilt ASS
Provision of Space for dual source energy meter with CT
Bus Coupler1000 A (50 KA)
BUS BARS:-
1000 Amps. TP&N aluminium bus bars (50 KA)
OUT GOINGS:-
2 Nos 630 Amp. FP MCCB (25 KA)
2 Nos 400 Amp. FP MCCB (25 KA)
4 Nos 315 Amp. FP MCCB (25 KA)
10 Nos 100 Amp. FP MCCB (25 KA)
10 Nos. 63 Amps. FP MCCB (25KA)
1
-
-
... More
Panel Specification as stated above (ADMIN LIGHT & POWER FLOOR PANEL)
Incomer
1 Nos.315 A FP ACB (50 KA)
1 Set phase indication lights (R, Y, B)
1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.
1 No. 0-315Amp. Ammeter (digital type) with inbuilt ASS
Provision of Space for dual source energy meter with CT
BUS BARS:-
500 Amps. TP&N aluminium bus bars (50 KA)
OUT GOINGS:-
4 Nos 63 Amp. FP MCB (25 KA)
4 Nos 40 Amp. FP MCB (25 KA)
4
-
-
... More
Panel Specification as stated above (ADMIN UPS PANEL)
Incomer
1 Nos.250 A FP ACB (50 KA)
1 Set phase indication lights (R, Y, B)
1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.
1 No. 0-250 Amp. Ammeter (digital type) with inbuilt ASS
Provision of Space for dual source energy meter with CT
BUS BARS:-
315 Amps. TP&N aluminium bus bars (50 KA)
OUT GOINGS:-
10 Nos 40 Amp. FP MCB (25 KA)
1
-
-
... More
Panel Specification as stated above (ADMIN Lift Panel)
Incomer
1 Nos 250 Amps Automatic Change Over Switch
1 No. 250 A FP MCCB (36 KA)
1 Set phase indication lights (R, Y, B)
1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.
1 No. 0-250 Amp. Ammeter (digital type) with inbuilt ASS
BUS BARS:-
400 Amps. TP&N aluminium bus bars (36 KA)
OUT GOINGS:-
6 Nos. 63 Amps. FP MCB (25KA)
1
-
-
... More
Panel Specification as stated above (TYPE 4 LIGHT & POWER PANEL)
Incomer
1 No. 160 A FP MCCB (36 KA)
1 Set phase indication lights (R, Y, B)
1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.
1 No. 0-160 Amp. Ammeter (digital type) with inbuilt ASS
Provision of Space for dual source energy meter with CT
BUS BARS:-
200 Amps. TP&N aluminium bus bars (36 KA)
OUT GOINGS:-
6 Nos 63Amp. FP MCB (25 KA)
1
-
-
... More
Panel Specification as stated above (TYPE-3 LIGHT & POWER PANEL
Incomer
1 No. 125 A FP MCCB (36 KA)
1 Set phase indication lights (R, Y, B)
1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.
1 No. 0-125 Amp. Ammeter (digital type) with inbuilt ASS
Provision of Space for dual source energy meter with CT
BUS BARS:-
160 Amps. TP&N aluminium bus bars (36 KA)
OUT GOINGS:-
4 Nos 63 Amp. FP MCB (25 KA)
1
-
-
... More
EARTHING
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
10
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
4
-
-
... More
Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified
6
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
200
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
100
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re- filling etc. as required.
100
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
100
-
-
... More
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
1000
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
10
-
-
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
200
-
-
... More
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
6
-
-
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For vertical run)
400
-
-
... More
Supply and lying of 32mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect.
200
-
-
... More
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
10
-
-
... More
FIRE ALAM
1.02 Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.
Two Loop Panel.
1
-
-
... More
1.04 Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.
1
-
-
... More
1.05 Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.
186
-
-
... More
1.06 Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.
93
-
-
... More
1.07 Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required.
20
-
-
... More
1.08 Supplying, installation, testing & commissioning of fault isolator complete with base as required.
30
-
-
... More
1.09 Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.
50
-
-
... More
1.1 Supplying, installation, testing & commissioning of addressable fire control module complete as required.(For automatic door closers, elevator controls, fire suppression systems, smoke ejectors etc)
30
-
-
... More
1.11 Supplying, installation, testing & commissioning of addressable fire monitor module complete as required.
30
-
-
... More
1.12 Supplying, installation, testing & commissioning of addressable phone control module complete as required.
30
-
-
... More
1.13 Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) complete with emitter and receiver including connections with remote test features etc complete as required.
10
-
-
... More
1.14 Supplying, installation, testing & commissioning of intelligent addressable duct detector including suitable Photo detector complete with base as required.
22
-
-
... More
1.15 Supplying, installation, testing & commissioning of addressable manual call point complete as required.
25
-
-
... More
1.16 Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.
25
-
-
... More
1.17 Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.
4
-
-
... More
1.18 Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.
25
-
-
... More
PUBLIC ADDRESS SYSTEM
2.01 Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.
1
-
-
... More
2.02 Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.
93
-
-
... More
2.03 Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.
10
-
-
... More
2.04 Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required.
5
-
-
... More
2.05 Supplying, installation, testing & commissioning of 6 inches dia, 2 watts, 70/100 volts ceiling speaker complete as required.
4
-
-
... More
2.06 Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.
3
-
-
... More
2.07 Supplying, installation, testing & commissioning of exit point directional sound speaker with voice and integral audio amplifier with selectable sound pulse patterns complete as required.
2
-
-
... More
2.08 Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.
1
-
-
... More
Cabling and Wiring
3.01 Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
200
-
-
... More
3.02 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
2790
-
-
... More
3.03 Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable
in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.
speaker cable Single pair, 2-core, 1.5 sqmm
1860
-
-
... More
3.05 Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.
800
-
-
... More
3.06 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
3.06 (A) 25mm dia conduit
2000
-
-
... More
3.06 (B) 32mm dia conduit
500
-
-
... More
FIRE FIGHTING
6. Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including excavation & providing cement concrete blocks as supports,anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.
6.2 150 mm dia
138
-
-
... More
7. Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Grooved fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
7.1 25 mm dia
344
-
-
... More
7.1 32 mm dia
121
-
-
... More
7.1 40 mm dia
33
-
-
... More
7.1 50 mm dia
66
-
-
... More
7.5 65 mm dia
76
-
-
... More
7.6 80 mm dia
107
-
-
... More
7.7 100 mm dia
38
-
-
... More
7.8 150 mm dia
54
-
-
... More
7.9 200 mm dia (wall thickness 6.3 mm)
20
-
-
... More
9. Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with
Gunmetal/Stainless Steel cap and chain as required :
9.1 Single headed Gunmetal
5
-
-
... More
10. Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type
A) with blank Gunmetal/Stainless Steel cap and chain as required :
10.1 Single headed Gunmetal
4
-
-
... More
11. Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as
required :
11.4 80 mm dia
11
-
-
... More
11.6 150 mm dia
18
-
-
... More
11.7 200mm dia
2
-
-
... More
12.7 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of
following sizes as required :
200mm dia
2
-
-
... More
15.4 Providing, installation, testing and commissioning of stainless steel Y- strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet
with 3 mm dia holes with stainless steel flange.
200mm dia
2
-
-
... More
14. Providing, installation, testing and commissioning of non-return valve
of following sizes confirming to IS:5312 complete with rubber,gasket,GI bolts,nuts, washers etc.as required :
14.4 80mm dia
1
-
-
... More
14.7 150mm dia
4
-
-
... More
14.8 200mm dia
2
-
-
... More
16. Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
16.1 Gun Metal
18
-
-
... More
17 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red,
conforming to IS 884 complete with the following as required.
20 mm nominal internal dia water hose thermoplastic (Textile
20 mm nominal internal dia gun metal globe valve & nozzle.
Drum and brackets for fixing the equipmets on wall.
Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe
17.1 30 m
5
-
-
... More
18. Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm
nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as
18.1 Gun Metal
9
-
-
... More
19. Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to
IS 904 as required :
19.2 4 way - 150 mm dia M.S. Pipe
1
-
-
... More
20. Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade
as required.
2
-
-
... More
21. Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb
type sprinklers of rating 68 degree centigrade with required accessories :
21.1 Pendent Sprinkler
250
-
-
... More
22. Providing & fixing of pressure switch in M.S. pipe line including
connection etc. as required.
4
-
-
... More
23. Providing & fixing flow switch in following sizes M.S. pipe including
connection etc as required.
23.2 150mm dia
5
-
-
... More
24. Providing, fixing, testing & commissioning of installation control valve of cast iron ody, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice
plate, gasket etc of follwing sizes as required :
24.3 150mm dia
1
-
-
... More
25. Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center
bracket, stockbar of following sizes complete as required.
25.2 1000mm
63
-
-
... More
25.4 1500mm
63
-
-
... More
13. Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the
outlet to the level of 3.5 kg/cm2 complete as required.
9
-
-
... More
MR-1 Providing & fixing dial type (100 mm) pressure gauge with isolation ball valve suitable for working pressure of 250 PSI, short pieces, nipples, elbows, stainless steel 'U' tube & ball valve, etc as required as per
specifications.
9
-
-
... More
MR-2 Providing & fixing Auto Air vent for fire hydent and sprinkler, suitable
for pressure not less than 15 Kg/Sq.cm.25 mm dia
25 mm dia
2
-
-
... More
MR-3 Providing and fixing inspectors test assembly complete with test valve, sight glass sectional drain valve, union with corrosion resistant orifice with UL & FM approved all complete as per drawing and as per
specifications.
50 mm dia
5
-
-
... More
MR-4 Supply, installation, testing and commissioning ISI marked (IS:2878) Fire Extinguisher, Carbon-di-oxide type capacity 4.5 Kg. Flat base including valve, discharge hose of not less than 10 mm dia, 1M long and complete in all respects including initial fill with CO2 gas conforming to IS:307-1966 and walll suspension braket as required as per specifications.
5
-
-
... More
MR-5 Supply, installation, testing and commissioning of 4kg ABC (Powder Type) Fire Extinguisher. Mild Steel Cylinders ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS:13849-1993 as required as per specifications.
5
-
-
... More
MR-7 Providing and fixing fire hose cabinet fabricated from 16 gauge M.S. Sheet with single or double glazed front door (with 4 mm thick glass) and locking arrangement, painted fire red with stove enamelled paint "FIRE HOSE" written on front including necessary supports approximate size.
2100x900 mm (IFH) (Door )
5
-
-
... More
900x600x500 mm deep.(EFH)
4
-
-
... More
MR-8 Providing & fixing double flanged flexicon rubber expansion joint (suitable for system test pressure) of standard length as per specs including rubber gaskets, flanges, nuts, bolts and washers complete as required as per
specifications.
100 mm dia
2
-
-
... More
150 mm dia
6
-
-
... More
MR-9 Providing, fixing, testing and commissioning gun metal suction coupling for fire brigade draw out of water from fire tank with 100 mm dia pipe with companion flange as per table "E", Cast Iron foot valve including nuts,
bolts, gasket etc. complete in all respects.
Two way
1
-
-
... More
MR-10 Providing and fixing standard fireman's axe with heavy insulated rubber
handle conforming to IS: 926 complete.
5
-
-
... More
FIRE FIGHTING PUMPS
1. Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following,
complete in all respects, as required :
Horizontal type, single stage, centrifugal, split casing pump of cast iron
body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with
Class-'F' insulation, conforming to IS-325.
M.S. fabricated Common base plate, coupling, coupling guard, foundation
bolts etc. as required.
Suitable cement concrete foundation duly plastered with anti vibration
pads.
1.5 2280 lpm at 70 m Head
1
-
-
... More
2. Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)
Horizontal type, single stage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS
1520.
Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts
electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.
M.S fabricated, common base plate, coupling, coupling guard, foundation
bolts etc. as required.
Suitable cement concrete foundation duly plastered and with anti vibration
pads.
2.5 2280 lpm at 70 m Head
1
-
-
... More
3. Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following,complete in all respects, as required : (Jockey Pump)
Horizontal type, single stage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS
: 1520.
Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure,
horizontal foot mounted type with Class-'F' insulation, conforming to IS :
325.
M.S.fabricated Common base plate, coupling, coupling
guard, foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered
and with anti vibration pads.
3.2 180 lpm at 70 m Head
1
-
-
... More
5. Control Panels
5.3 Incomings
630A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Ammeter (0-630 A) with selector swtich & CTs etc.
LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps
Set of Copper Bus Bar 800Amps
Outgoings
Main Fire Pump
250 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 100 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote,
auto/manual/OFF operation.
Jockey Pump
125 A, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor
complete with all acceessories and internal wiring required for automatic
operation, selector switch for local/remote, auto/manual/OFF operation.
1
-
-
... More
HVAC
Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/ Variable Refrigerant Volume aircooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s) ,minimum two compressors for above 14HP modules, microprocessor based Controller ,top discharge type condensing unit(s), with R410A Refrigerant ,vibration isolators ,with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Condition s and work even at 50°C ambient temperature without tripping. The units hall be suitable t owork on 400V+/- 10%,3Phas e,50Hz AC power supply .The unit shall be filled with first charge of the refrigerant and ready for use as required .The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 (Approved Makes :Daikin /Toshiba/ General
/Mistribushi /Voltas )
Outdoor Units
20 HP
2
-
-
... More
18 HP
2
-
-
... More
16 HP
2
-
-
... More
14 HP
2
-
-
... More
12 HP
1
-
-
... More
10 HP
1
-
-
... More
Supply,installation,testing and commissioning of following minimum capacity 4- way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media prefilter ,fan section with low noise fan/dynamically balanced blower ,multi speed motor ,coil section with DX Copper coil,electroni cexpansion valve, outer cabinet ,drain pump,grill,necessary supports,vibration isolation, cordless remote control etc.,suitable for Operation on single phase 230V±10%,50Hz AC supply ,complete ,as required. The unit shall have automatic force shut down provision in case offire on receiving signal from BMSSystem .The cooling capacity of indoor unit will beat air inlet conditions of 27 Degree CDB and 19 Degree CWB temperature.(Approved Makes:
Daikin/Toshiba/General/Mistribushi/Voltas)
0.8 TR
6
-
-
... More
1 TR
12
-
-
... More
1.6 TR
12
-
-
... More
2 TR
12
-
-
... More
3.2 TR
12
-
-
... More
4.1 TR
10
-
-
... More
Supply,installation,testing and commissioning of following minimum capacity VRV/VRF Highwall type Indoor unit equipped with washable synthetic media pre- filter, fans ection with low noise fan /dynamically balanced blower,multi speed motor,coil section with DX copper coil,electronic expansion valve, outer cabinet
,cordless remote control ,drain pan ,necessaryaccessories etc .,suitable for operationon 230V±10%,50Hz ,single phase AC supply ,complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System .The cooling capacity of indoor unit will beat air inlet conditions of 27Degree C DB and 19 Degree C WB temperature. CWB temperature.(Approved Makes: Daikin/Toshiba/General/Mistribushi/Voltas)
0.8 TR
2
-
-
... More
1.0TR
2
-
-
... More
1.65 TR
2
-
-
... More
2.0 TR
3
-
-
... More
Supply,Installation,testing and commissioning of corded remote controls as per drawing and
specifications
(Approved Makes: Daikin/Toshiba/General/Mistribushi/Voltas)
60
-
-
... More
Supply,Installation,testing and commissioning of centralised remote controlers as per
drawing and specifications
1
-
-
... More
Interconnecting 'Y' Joints i.e. Refnet Joints/ Header with Y-joints and headers
70
-
-
... More
Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required.
6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick
insulation
260
-
-
... More
9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick
insulation
525
-
-
... More
12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick
insulation
320
-
-
... More
15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick
insulation
525
-
-
... More
19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick
insulation
260
-
-
... More
22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick
insulation
240
-
-
... More
25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick
insulation
165
-
-
... More
28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick
insulation
310
-
-
... More
34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with19 mm thick
insulation
130
-
-
... More
41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick
insulation
130
-
-
... More
Supply installation testing commissioning Shielded Control Cables for VRV
System with necessary ISI mark Medium class rigid PVC pipes with necessary accessories with termination in machine and control equipments.
2C X 1.5 Sq mm Shielded Armoured(for transmission)
2900
-
-
... More
2C X 1.5 Sq mm Shielded Armoured(for remote)
1200
-
-
... More
Propellar Type Fan
Supply,installation,testing and commissioning of Propeller type free discharge exhaust fans complete with motor , fan ,exhaust Louvers as per drawings and specifications.
200 mm dia
8
-
-
... More
Inline Ducted Type Exhaust /FRESH AIR Fans
Supply, Installation, testing and Commissioning of ceiling / floor mounted Rectangular box type/circular type Inline fan, for toilet exhaust , ot exhaust , lab exhaust constructed of GSS duly powder coated as per detailed specifications, complete with forward curved SISW fan, motor and drive suitable for 220 ± 10% volts, 1 phase, 50 Hz A.C supply, with necessary canvas connection etc complete in all respects.
500 cfm at 10 mm static
10
-
-
... More
250 cfm at 10 mm static
10
-
-
... More
Rectangular ductwork for toilet
Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
24 Gauge (thickness 0.63mm sheet)
120
-
-
... More
Supplying & fixing of powder coated extruded aluminium Supply air grill/ Return Air Grills with louvers but with/without volume control
dampers complete as required.
4
-
-
... More
Drain Piping :
Supply,installation,testing and commissioning of of CPVC pipes having thermal stability for condesate water including wrapping of 9mm thick class 0 nitrile rubber insulation with suitable adhesive with all CPVC plain and brass threaded fittings including the pipes with clamps 1metre spacing.This including jointing of pipes with one step CPVC solvent cement and testing of joints complete as per drg and specifications
50 mm dia
200
-
-
... More
40 mm dia
175
-
-
... More
32 mm dia
225
-
-
... More
25 mm dia
350
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with bends , reducer and all accessories ,connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
100 mm width X50 mm depth X1.6 mm Thickness
150
-
-
... More
150 mm width X50 mm depth X1.6 mm Thickness
180
-
-
... More
300 mm width X50 mm depth X1.6 mm Thickness
250
-
-
... More
450 mm width X50 mm depth X2 mm Thickness
125
-
-
... More
LIFT WELL PRESSURIZATIONFANS-Supply, installation, testing and commissioning of AMCA Certified (For Air and Sound Performance) vane axial flow fan of different capacity as mentioned in schedule in standard M.S. construction. Entire fan model & AMCA seal shall appear in technical submittal of fan. All the fans are synthetic enamelled painted / hot dip galvanized with minimum 220 GSM Zinc coating and complete with bird screen at Inlet. The electric motor coupler shall be squirrel cage induction motor (EFF-2 type) confirming to IS-325 IP 55 with class H insulation. . Fan efficiency should not be less than 60% noise level shuld not be more than as specified in schedule when measured in hemisperical reverberant room conditions with backdraft damper. Fans should be as per
specification and drawings.
3500 CFM - 25MM STATIC
2
-
-
... More
STAIRCASE PRESSURIZATIONFANS-upply, installation, testing and commissioning of AMCA Certified (For Air and Sound Performance) vane axial flow fan of different capacity as mentioned in schedule in standard M.S. construction. Entire fan model & AMCA seal shall appear in technical submittal of fan. All the fans are synthetic enamelled painted / hot dip galvanized with minimum 220 GSM Zinc coating and complete with bird screen at Inlet. The electric motor coupler shall be squirrel cage induction motor (EFF-2 type) confirming to IS-325 IP 55 with class H insulation. . Fan efficiency should not be less than 60% noise level shuld not be more than as specified in schedule when measured in hemisperical reverberant room conditions with backdraft damper. Fans should be as per specification and drawings.FOR STAIRCASE PRESSURIZATION
10000 CFM - 25MM STATIC
2
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with bends , reducer and all accessories ,connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
100 mm width X50 mm depth X1.6 mm Thickness
150
-
-
... More
150 mm width X50 mm depth X1.6 mm Thickness
400
-
-
... More
300 mm width X50 mm depth X1.6 mm Thickness
275
-
-
... More
450 mm width X50 mm depth X2 mm Thickness
180
-
-
... More
Supply,installation,testing and commissioning
alised floor/wall mounted type made of 2 mm thick
steel sheet duly painted complete as per the
specifications and drawing and as detailed below :
1 no. 630 Amps TPN ACB incomer with KWH
meter, phase indicating lamps with control fuse &
toggle switch, voltmeter and selector switch, ammeter
with CTs and selector switch
3 nos. of 32 Amps TPN MCB outgoing for VRV OD units
with star delta starter
8 nos. of 40 Amps TPN MCB outgoing for VRV OD units
with star delta starter
8 nos. of 63 Amps TPN MCB outgoing for VRV OD units
with star delta starter
2 nos. of 100 Amps TPN MCCB outgoing for VRV OD units
with star delta starter
(Approved Make:EAPL/Tricolite/Trident)
1
-
-
... More
Supplying following 1.1kV grade, XLPE insulated, heavy duty armoured cables suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, galvanised steel armouring and with all components as mentioned in BOQ, specifications, complete as required.
3 Core 16 Sqmm. Alum. Armd
280
-
-
... More
3 Core 10 Sqmm. Alum. Armd
650
-
-
... More
3 Core 6 Sqmm. Alum. Armd
350
-
-
... More
Earthing :
Supply,installation,testing and commissioning of following
double earthing continuity conductor of Cu from Panels to
respective equipment on surface or recess as per drawings
and specifications.
25 mm X 5 mm strip
200
-
-
... More
8 SWG wire
150
-
-
... More
UPS SYSTEM
Supply, installation, testing & commissioning of the following: IGBT based 60 KVA parallel True Online Double Conversion UPS suitable for unbalanced, 3 Phase input and 3 phase 415 V output UPS system with isolation transformer (i.e., K-13 type), suitable for operating in parallel and each comprising as per technical specification complete as required.
1
-
-
... More
SUBSTATION
L.V. PANEL BOARD
MAIN LT Panel
Supply, erection, testing & commissioning of IP -42 cubicle type Panel fabricated (folded joints construction) out of 14 SWG CRCA sheet steel floor mounted totally enclosed extendable on both sides switchboard of uniform width with top cable entry and suitable for use on 415 V, 3 phase 4 wire 50 c/s having 50 KA fault capacity complete and housed with incomming and outgoing aluminium bus-bars,interconnection between feeders etc. and their accessories including supply and fixing of base channels of 100x50x6mm as required with provision for following incoming and outgoing switchgear with protection, metering etc. and terminals for scheduled cables and also compataible to PC/PLC/BMS with communiction port RS-485, complete as required and as per specification and schematic diagram complete as required. confirming IS 61439
1
-
-
... More
APFC PANEL
Supplying, installation, testing and commissioning of free standing, front operated cubical type capacitor control panel with aluminium bus bars of current density 0.8Amps/sq.mm.& rupturing capacity(50KA), LED indicating lamps interconnections with under noted switch gears as per technical specifications and drawings complete as required. All MCCB shall have rotary operating handles. (capacitor control panel)
2
-
-
... More
Supply and installation of MS Support structure for busduct and cabling work complete in all respect along with duly coated with two coats of red-oxide primer and two coats of enamel paint. The colour shade of final paint will be as decided by the client.
1000
-
-
... More
L.V. CABLES
Supplying following 1.1kV grade, XLPE insulated, heavy duty armoured cables suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, galvanised steel armouring and with all components as mentioned in BOQ, specifications, complete as
required.
3.5 x 300 sq.mm
1500
-
-
... More
3.5 x 240 sq.mm
700
-
-
... More
3.5 x 185 sq.mm
500
-
-
... More
3.5 x 150 sq.mm
50
-
-
... More
3.5 x 120 sq.mm
500
-
-
... More
3.5 x 95 sq.mm
250
-
-
... More
3.5 x 70 sq.mm
500
-
-
... More
3.5 x 50 sq.mm
50
-
-
... More
3.5 x 35 sq.mm
50
-
-
... More
3.5 x 25 sq.mm
200
-
-
... More
4 x 16 sq.mm
1000
-
-
... More
4 x 10 sq.mm
1000
-
-
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
100mm dia
150
-
-
... More
150 mm dia.
150
-
-
... More
250mm dia
150
-
-
... More
Supply and making end termination with brass double compression gland including providing and crimping of aluminium solderless lugs / ferrules for XLPE armoured power
aluminium conductor cable 1.1 KV grade of following sizes:-
3.5 x 300 sq.mm
80
-
-
... More
3.5 x 240 sq.mm
20
-
-
... More
3.5 x 185 sq.mm
20
-
-
... More
3.5 x 150 sq.mm
20
-
-
... More
3.5 x 120 sq.mm
20
-
-
... More
3.5 x 95 sq.mm
20
-
-
... More
3.5 x 70 sq.mm
20
-
-
... More
3.5 x 50 sq.mm
20
-
-
... More
3.5 x 35 sq.mm
20
-
-
... More
3.5 x 25 sq.mm
20
-
-
... More
4 x 16 sq.mm
50
-
-
... More
4 x 10 sq.mm
50
-
-
... More
Supply, laying and testing of under noted sizes of copper conductor XLPE insulated PVC sheathed & sleeved armoured and overall PVC sleeved 1.1 KV grade power distribution cables conforming to relevant IS code and as per specification in ground (in existing trenches) through pipe or on wall / racks cable trays including dressing and clamping the cable with MS zinc passivated clamps etc. as required.
4 x 6 sq.mm
150
-
-
... More
4 x 4 sq.mm
150
-
-
... More
4 x 2.5 sq.mm
150
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
Upto 35 sq. mm
660
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
320
-
-
... More
Above 95 sq. mm and upto 185 sq. mm
420
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
880
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing masonry open duct or tray as required.
Upto 35 sq. mm
1320
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
480
-
-
... More
Above 95 sq. mm and upto 185 sq. mm
630
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
1320
-
-
... More
Supply and making end termination with brass double compression gland including
providing and crimping of copper solderless lugs / ferrules for XLPE armoured power copper conductor cable 1.1 KV grade of following sizes:-
4 x 6 sq.mm
10
-
-
... More
4 x 4 sq.mm
10
-
-
... More
4 x 2.5 sq.mm
10
-
-
... More
Supplying, laying, connecting,terminating, testing & commissioning of under noted sizes of PVC insulated, PVC sheathed unarmoured and overall PVC sleeved 1.1 KV grade control cables in pipe, wall, racks, cable trays, including, dressing, clamping with M.S Zinc passivated clamps etc as required conforming to relevant IS code and technical
specifications.
8C x 1.5 sq.mm
100
-
-
... More
10C x 1.5 sq.mm
100
-
-
... More
14C x 1.5 sq.mm
100
-
-
... More
Supply and fixing of cable tray/steel work in position including clamps, frame work of flats, angle iron, channel with fabrication work including cutting, bending, welding, drilling bolting etc. as per design as required. One coat of primer and 2 coats of enamel paint of approved shade shall be provided.
1000
-
-
... More
Supply and fixing of perforated 2mm thick CRCA sheet steel power coated cable tray of following sizes complete with bend/tee joints, coupling plate & nuts bolts etc. including providing and fixing of M.S. painted hanger etc. as required.
300mm wide 62.5mm depth
20
-
-
... More
450mm wide 62.5mm depth
20
-
-
... More
600mm wide 75mm depth
20
-
-
... More
900mm wide 75mm depth
20
-
-
... More
Supplying and fixing ladder type prefabricated CRCA sheet steel Stove enameled cable tray complete with bend/tee joints, coupling plate and nut bolts washers etc. with side runner 20 x 100 x 2.5mm and centre rungs of size 15 x 30 x 2.5mm c/c 250mm.
including providing and fixing of hangers etc. as required.
300mm
20
-
-
... More
450mm
20
-
-
... More
600mm
20
-
-
... More
900mm
20
-
-
... More
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long
and fixing the same in ground as required.
50
-
-
... More
SUB-HEAD -III: EARTHING
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
5
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
10
-
-
... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
100
-
-
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring
washer spaced at 50mm)
100
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re- filling etc. as required.
50
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as
required.
50
-
-
... More
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in
15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
1000
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
50
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
50
-
-
... More
Control Cables
Supplying, Laying, terminating, testing, commissioning of following sizes of Copper Conductor PVC insulated, PVC sheathed armoured cable 1100 V grade. On surface the cable run shall be fixed on G.I. clamps etc of suitable size or as directed by the E-I-C complete in all respects. Supply and providing cable identification markers. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. as per specifications complete with end termination as required.
24 C x 2.5 Sqmm
100
-
-
... More
4 C X 2.5 Sqmm
100
-
-
... More
2 C X 2.5 Sqmm
100
-
-
... More
2 C X 4.0 Sqmm
100
-
-
... More
3CX6 Sqmm
100
-
-
... More
Supplying, Laying, terminating, testing, commissioning of following sizes of Copper Conductor PVC insulated shielded , PVC sheathed armoured cable 1100 V grade. On surface the cable run shall be fixed on G.I. clamps etc of suitable size or as directed by the E-I-C complete in all respects. Supply and providing cable identification markers. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. as per specifications complete as required.
8 C X 0.75 Sqmm
100
-
-
... More
TRANSFORMERS
Supplying, installation testing and commissioning of 1000 kVA, outdoor type, oil cooled, distribution transformer, suitable for 3 phase, 50HZ, AC supply, rated turn/voltage ratio of 11kV/0.433kV,Dyn 11 vector group, percentage impedence of 4.5%, oil immersed naturally cooled (ONAN) mechanism,core made of good quality CRGO, windings made of double wound copper, insulation class A,approved danger and arc flash signages and with all components as mentioned in BOQ, specifications and SLD & confirming IS 1180 Level-II losses, complete as required.
2
-
-
... More
HT PANEL BOARD
A. Incomming Panel 1 Nos. each shall be comprising of:
B. Outgoing Panel 2 Nos. each shall be comprising of:
1
-
-
... More
Supply, erection, testing & commissioning of 230 V, single phase, 2 wire, A.C. to 24V D.C. 180 AH sealed maintenance free batteries with semiconductor/ IGBT (half wave rectifier) with auto-manual trickle boost facility battery charging units complete including 1 No. Distribution board having 63 Amps DP MCB incomer and 12 No. 16/ 20 Amps DP MCBs (D.C. duty) as outgoing complete as required as per technical
specifications.
1
-
-
... More
Supplying and fixing of non-skid rubber mat 25mm thick and 900mm width as required including cutting to required lengths of approved make with Test Certificates for H.T. 11 KV panels.
10
-
-
... More
Supplying and fixing of non-skid rubber mat 16mm thick and 900mm width as required including cutting to required lengths of approved make with Test Certificates for L.T.
panels.
2
-
-
... More
Supplying and fixing of fire bucket painted red and duly filled with sand conforming to IS: 2546-1974.
4
-
-
... More
Supplying and fixing of MS stand suitable for supporting two buckets (Pedestal type)
1
-
-
... More
Supplying and fixing of MS stand suitable for supporting four buckets (Pedestal type)
1
-
-
... More
Supplying and fixing of shock restoration chart written in English and Hindi duly framed in as required.
1
-
-
... More
Supplying and fixing of carbon dioxide fire extinguisher type 4 kgs. Capacity of approved make with wall mounting bracket as required conforming to IS: 2878/1976 (Push type).
6
-
-
... More
Supplying and fixing of first aid box as approved complete with standard kit as prescribed by Indian Red Cross.
1
-
-
... More
Supply and fixing of H.T. Danger notice plate of 250x200mm made of mild steel at least 2mm thick and vitreous enameled white on both side with inscription in signal red
colour on front side as required.
4
-
-
... More
D.P. Structure, H.T. Panel Board, Battery Charger & HT Metering Panel
Supply, erection, testing and commissioning of H Pole (double pole) structure in position 13M long MS pole (Swaged type) as per IS-410 SP-70 with latest amendment and necessary anti climbing devices, cross arms, bracing, clamps and painting with one coat of primer and two coats of aluminium paint including circuit marking etc. as required. The poles to be erected in cement concrete foundation of 1:2:4 with collar including excavation in soil (600mm(L) x 600mm(W) x 1800mm(D)) and making good
complete as required.
1
-
-
... More
Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and
refilling etc. as required.
4
-
-
... More
Supply, erection, testing and commissioning of 11 KV disc insulator for 33 KV over- head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required (9 Nos Set : 3 Nos for
each phase)IS: 731-1963 and 3188-1965 for disc insulator.
3
-
-
... More
Supplying and erection of 11 KV pin insulator complete with
large steel head G.I. pin, nuts, washers etc. as required.
3
-
-
... More
Supply, erection, testing and commissioning of 11 KV, 3 phase, 630 Amps central post racking type gang operated switch with earth switch complete with hardware, arcing horns, arcing contacts, vertical drop out fuses, down rod operating with locking devices, necessary MS channel/angle iron brackets, clamps insulators & connections etc. as required for earthed system and conforming to IS: 19813.
1
-
-
... More
Supply, erection, testing and commissioning of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 30 KV (rms) with a nominal discharge current rating of 10 KA and complete with galvanised
clamping arrangement, G.I. bolts, nuts, washers etc. as required.
3
-
-
... More
Supply, erection, testing and commissioning of 25x5mm GI earth strip including clamps and binding etc. as required as per specifications and drawings.
120
-
-
... More
Supplying and laying of the 250mm dia 'B' class GI pipe complete with all accessories as required as per specifications.
20
-
-
... More
Supplying and fixing of 1200x1200x12mm GI plate, vertically earthing complete with 20mm dia GI pipe, a funnel for watering with hinged cover masonry housing alternate layer of coke and salt atleast 100mm thick all-around etc. complete as required confirming IS-3043
8
-
-
... More
Supply and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of following size direct in ground including excavation, sandcushioning, protective covering and refilling the trench etc. as required.
3Cx300 Sq.mm.
200
-
-
... More
supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required.
3Cx300 Sq.mm.
2
-
-
... More
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required.
3Cx300 Sq.mm.
2
-
-
... More
Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required.
3Cx300Sq.mm.
1
-
-
... More
EXTERNAL LIGHTING
Supplying, installation, testing and commissioning of L.T. panel fully compartmentalized cubical type sheet clad floor mounted totally enclosed , extensible on both sides, switch board suitable for use on 415 Volts 3-phase, 4 wire, 50 Hz system having required fault capacity, housed with incoming and outgoing, Aluminium bus bars with current rating of 0.8 Amp/sq.mm, interconnection etc. with indication lamps, accessories etc, as required as per specification and schematic diagram as required. (Street lighting Panel)
INCOMER:-
2
-
-
... More
Supply and fixing of decorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and above protection complete in all respect including connecting copper wiring.CAT-AAA
10
-
-
... More
Supply & Erection of 3/4 meter long GI Decorative pole for above post top fitting with inbuilt junction box,MCB,sleeve in foundation and required wiring till fixture in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and
refilling etc. as required.
6
-
-
... More
Supply and fixing of decorative 8 to 16 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect including foundation and connecting copper wiring. CAT-AAA
10
-
-
... More
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 140 to 150 Watt. Confirming to IP 66 Protection complete in all respects including
connecting copper wiring (CAT- AAA)
7
-
-
... More
Supply & fixing of 9mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and with inbuilt junction box with MCB,and wiring till fixture, sleeve in foundation,Required T&P completee in
all respect.
7
-
-
... More
Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and with inbuilt junction box with MCB,and wiring till fixture,sleeve in foundation, Required T&P completee in all respect.
1
-
-
... More
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 70 to 90 Watt. Confirming to IP 65 protection complete in all respect including connecting copper wiring.CAT-AAA
10
-
-
... More
Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.
4
-
-
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
300
-
-
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
90 mm dia (OD-90 mm & ID-76 mm nominal)
100
-
-
... More
120 mm dia (OD-120 mm & ID-103 mm nominal)
200
-
-
... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required
80 mm dia
20
-
-
... More
100 mm dia
50
-
-
... More
DG
Design, supply at site, installation, testing & commissioning of 3-phase, 415 volt, 1500 RPM, 50 HZ, Diesel generator set with prime rating capacity of 630 KVA at 0.8 pf lagging diesel engine alternator set mounted on common base frame in outdoor type acoustic enclosure , day tank, with PCC Panel with AMF Panel,Adopter box with AL extended bus bar, battery, batter charger, return fuel cooler, anti vibration mounting pads including residential silencer, engine alternator, pcc based auto start & synchronization set, safeties with accessories as per specification complete as required. Diesel engine shall conform to IS:10000 and alternator shall be self excited complete with AVR to IS:4722.Genset should be capable to take an average loading of minimum 85%. net output shall be designed @ 50 degree ambient .Synchronisation should be based on No Master Logic for system reliability . Any genset reaching rated RPM should automatically become master .AVR should be digital type AVR to provide fast response with respect to change in load , it should provide digital governing with digital isochronous synchronisation. To improve the reliability of the System , the synchronizing module should be part of Engine Controller . No external controller should be used for synchronising and shall not be accepted.Genset controller should have Weak Battery Monitoring system . The control system should test the battery each time the genset is signalled to start and indicate a warning if the battery is weak
1
-
-
... More
SOLAR PV CELL
Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:-
a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules
used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and
suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE
insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as
required.
50
-
-
... More
IP CCTV SYSTEM
SITC of IP Dome Camera 4MP IR Dome Camera, Metal Housing, H.265+/H.265/H.264, Up to 2592x1520@25fps, Min. illumination Color: 0.002Lux@F1.6, Smart IR, IR Range: 30m, Built-in Mic, SD Card Slot, Reset Button, POE, IP67, IK10, 120dB WDR, Support tripwire and perimeter, ANR. BIS,CE,FCC,ROHS,UL/EN. etc all complete.
Make: Pelco / Royalshield / Bosch / Axis
50
-
-
... More
SITC of IP Bullet Camera 4MP IR Bullet Camera, Metal Housing, H.265+/H.265/H.264, Up to 2592x1520@25fps, Smart IR, IR Range: 50m, Built-in Mic, SD Card Slot, Reset Button, 120dB WDR, POE, IP67, 120dB WDR, Support tripwire and perimeter, ANR. BIS,CE,FCC,ROHS,UL/ENetc all complete.
Make: Pelco / Royalshield / Bosch / Axis
12
-
-
... More
SITC of IP PTZ Camera 2 MP -IP PTZ Camera 2 MP - IP Network 1/2.8" CMOS, Dual IR Cut Filter , 1920x1080:30fps, H.264/MJPEG Or better, Triple streams, AC24V/POE+, IP66, Micro SD card slot support up to 128GB, Alarm in/out 1/1, Audio in/out 1/1, -30- 65℃, IP66, 33x optical zoom(4.6 ~ 152mm), IR range: up to 150m, 120dB WDR, IP66, 33X optical zoom, HLC,BLC,3D DNR, Smart functions-Auto Tracking, CE, FCC, Defog, Privacy mask, Up to 8 Pattern, Presets – 300 , PAN Range - 360° , 0.1°/s ~ 180°/s ,Tilt Range -–16° ~ 90° (auto flip) , 0.1° ~ 120°/s etc all complete. Certificate – BIS, CE, FCC, ROHS, UL/EN etc all complete.
Make: Pelco / Royalshield / Bosch / Axis
1
-
-
... More
SITC of NVR - H.265 8SATA 64ch NVR, H.265+ Compression, Support 64-ch input, Up to 12MP Resolution Recording, Incoming Bandwidth 320Mbps, Outgoing Bandwidth 320Mbps, HDMI and VGA independent outputs, HDMI Video output at up to 4K (3840 × 2160) resolution, 8 SATA interfaces for 8 HDDs, up to 10TB for each HDD, eSATA interface:- 1 SATA interface, 2xRJ45 self-adaptive 10/100/1000 Mbps network interfaces, VCA detection alarm is supported, Array Type:- JBOD, RAID0/1/5/6/10, 2xUSB 2.0, 1xUSB 3.0, serial Interface:- 2xRS-485, 1xRS-232, No.of Hard Disks 4TB for the calaculation of 1 month recording 2MP@25FPS as per all camera count, VMS should also be included if required etc. all complete.
Make: Pelco / Royalshield / Bosch / Axis
1
-
-
... More
SITC of 10 TB Survillance Sata Type HDD for Network video Recorder etc all complete Make : WD / Seagate
8
-
-
... More
SITC of MS Windows 2008 Server R2 x64, Intel i5 Xeon Quad Core processor, 8 GB RAM, 1TB HDD, 2GB Graphics Card. With CD/DVD player, Mouse and Keyboard etc all complete.
Make : HP / Lenevo / Dell
1
-
-
... More
SITC of 55" Professional Display Panel, 4K/UHD Resolution, Direct-lit LED, Brightness 400 nits, Contrast ratio 1200:1, inputs: 2 HDMI, DVI, DisplayPort, Audio inputs with mounting arrangements etc all complete
1
-
-
... More
IT DATA NETWORK AND VOICE SYSTEM (PASSIVE COMPONENT)
SITC of LSZH Cat 6A-10G speed unshielded twisted pair computer cable with 23 AWG solid copper conductors in existing concealed/surface conduits/Raceways complete 305 Mtr. Roll as per specification etc. all complete.
Make: 3C3 / Corning / Panduit / Actassi
30
-
-
... More
SITC of Single port faceplate with Gang Box etc. all complete.
Make: 3C3 / Corning / Panduit / Actassi
80
-
-
... More
SITC of Dual port faceplate with Gang Box etc. all complete.
Make: 3C3 / Corning / Panduit / Actassi
80
-
-
... More
SITC of UTP Cat-6A Information Outlet Red for Data, IP CCTV as per specification etc. all complete
Make: 3C3 / Corning / Panduit / Actassi
150
-
-
... More
Supply of CAT6A Ceiling Connector with CAT 6A Copper pigtail with moudled RJ45 Plug (for Wireless AP's)
Make: 3C3 / Corning / Panduit / Actassi
2
-
-
... More
SITC of Cat-6A Mounting Cords 7 Feet for Data as per given Specification etc. all complete.
Make: 3C3 / Corning / Panduit / Actassi
100
-
-
... More
SITC of Cat-6A Mounting Cords 4 Feet for Data and Voice Jack Panel end as per given Specification etc. all complete.
Make: 3C3 / Corning / Panduit / Actassi
100
-
-
... More
SITC of Cat-6A, 24 Port Jack Panel for data as per given Specification etc. all complete. Make: 3C3 / Corning / Panduit / Actassi
5
-
-
... More
SITC of Cat-6A, 24 Port Jack Panel for CCTV and ACS as per given Specification etc. all complete.
Make: 3C3 / Corning / Panduit / Actassi
4
-
-
... More
SITC of Cable Manager for above jack panels as per given Specification etc. all complete.
Make: 3C3 / Corning / Panduit / Actassi
9
-
-
... More
SITC of 12 Core Single Mode Fiber (Armored) Cable as per given Specification etc. all complete.
Make: 3C3 / Corning / Panduit / Actassi
1000
-
-
... More
SITC of 12 Port Fiber LIU Loaded with SC SM Coupler, as per given Specification etc. all complete.
Make: 3C3 / Corning / Panduit / Actassi
4
-
-
... More
SITC of 24 Port Fiber LIU Loaded with SC SM Coupler, as per given Specification etc. all complete.
Make: 3C3 / Corning / Panduit / Actassi
1
-
-
... More
SITC of SC SM Pigtail (1.0 Mtr) as per given Specification etc. all complete.
Make: 3C3 / Corning / Panduit / Actassi
20
-
-
... More
SITC of SC-LC SM Fiber Patch Cords ( 3 Mtr) as per given Specification etc. all complete.
Make: 3C3 / Corning / Panduit / Actassi
4
-
-
... More
SITC of 9U (W 600mm/ D 600mm) wall mount with front glass door and side panels with lock & key (load bearing capacity of 40Kgs), AC main Channel 06 points 5 Amp (PDU) with Mounting Hardware (Pack of 10) ect all complete
Make: Rittal / Valrack/ APW / Netrack
1
-
-
... More
SITC of 15U (W 600mm/ D 600mm) wall mount with front glass door and side panels with lock & key (load bearing capacity of 40Kgs), AC main Channel 06 points 5 Amp (PDU) with Mounting Hardware (Pack of 10) ect all complete
Make: Rittal / Valrack/ APW / Netrack
5
-
-
... More
SITC of 42U Close Floor Mounted Rack - (800mm x 1000mm - W X D), with Perforated doors (Front & rear), 2 Nos. of 1U power distribution box, with 10 x IEC - C13 sockets & with 32Amp MCB- terminating on a IP56 power sockets - VERTICAL - in each rack, 2 No. Horizontal PDU with 5/15Amp Universal Sockets with 32Amp MCB - in each rack, Front mounting PVC Cable managers/ guide x 10 in each rack (1U Horizontal), Integral Cable management ducts/ arms (on either side) with covers, Fan housing unit 4 Fan POSN - 90 CFM 230VAC, Bar, Earthing 42U with Mounting Hardware (Pack of 10) ect all complete
Make: Rittal / Valrack/ APW / Netrack
1
-
-
... More
IT DATA NETWORK AND VOICE SYSTEM (PASSIVE COMPONENT)
Supply, Installation, Testing & Commissioning of Layer 2 Switch 24port as per the given Specification etc. all complete.
9
-
-
... More
Supply, Installation, Testing & Commissioning of Wireless LAN Controller which can control up to 50 APs as per the given Specification etc. all complete.
1
-
-
... More
Supply, Installation, Testing & Commissioning of 100% Non Blocking Fully Digital Integrated Services Digital Network (ISDN) Compatible Voice Over Internet Telephone(VoIP) ready 19" Rack mountable EPABX presently equiped with 02 ISDN PRI Trunk Lines (60 Channel), 16 IP Extension, 16 Digital Extension, 48 Analogue Extension, Expandable up to 120 Ports / Channels and other as per the given Specification etc. all complete.
Make: Panasonic / Avaya / Alcatel Lucent/ Cisco
1
-
-
... More
Supply, Installation, Testing & Commissioning of Analog Phone With Speaker , Small Display etc. all complete.
Make: Panasonic / Avaya / Alcatel Lucent
80
-
-
... More
Supply, Installation, Testing & Commissioning of Access point which can support the given Controller as per the given Specification etc. all complete.
Make- Cisco / Juniper / Allied Telesis
4
-
-
... More
11KV H.T. LINE FOR 1.5KM DISTANCE
2.22 Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
30
-
-
... More
5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
30
-
-
... More
5.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
750
-
-
... More
5.9 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
112.5
-
-
... More
13.1 Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.
21
-
-
... More
13.4 Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6mm
M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.
30
-
-
... More
Erection of pole top/ straight two wire/ V shape two wire, angle iron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/33 KV as required.
15
-
-
... More
Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required.
90
-
-
... More
Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.
54
-
-
... More
Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required.
4.5
-
-
... More
Supplying of channel iron 100 mm X 50 mm X 6 mm (9.56 kg per metre) cross arm for two wire 33 KV over head line conductors complete with 50 mm X 50 mm X 6 mm angle iron bracket welded to the channel iron and complete with 50 mm X 6mm
M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins/ fittings, bolts, nuts, washers etc and painting with primer and finish paint as required .
30
-
-
... More
Supplying including erection of 12.0 Mtr. G.I. Steel Tubular Pole (410sp-66) (Stnd. Weight 322 K.g.) along with fitting fixing, excavation work, foundation of bolts and nuts in R.C.C. work in 1:3:6 proportion of 1.80 Mtr. depth, Cement plastering and etc. complete with all necessary materials as required and specified by the Department.
48
-
-
... More
Supply of following size of GLOSTER Brand HT cable with stranded compect circular Aluminium conductor, Conductor screened with Extruded semicnducting compound, XLPE Insulated, Insulation Screened with Extruded semiconducting compound in combination with Copper Tape, Aluminium Dlat Strip/ Round Wire armoured and overall PVC ST2 Sheathed cable (Conforming to IS:7098 Part-II 2011) as specified and directed by the deptt. (GLOSTER or equivalent make as approved by this Deptt.) 120.00 sq.mm 1 Core U.G. Armoured H.T. Cable.
375
-
-
... More
Supplying with fitting and fixing 11KV 1 Core x 120 Sq.mm covered conductor cable Termination Jointing Kit - 11 KV (Straight through Type) with all necessary material complete as required and as directed by the Dept.
9
-
-
... More
Supplying with fitting and fixing 11KV 1 Core x 120 Sq.mm covered conductor Wedge connector Kit - 11 KV (Straight through Type) with all necessary material complete as required and as directed by the Dept.
18
-
-
... More
Supplying and fixing of 11 KV GOAB Switch 400 A Gang operated switch with all accessories complete as required and as directed by the department.
3
-
-
... More
Supplying and fixing of 11 KV 150 A D.O. fuse set complete as required and as directed by the department.
3
-
-
... More
Supplying with binding of HT ACSR AAA Reccon conductor as required complete.
4500
-
-
... More
Payment to be made to APDCL authority against Load Security.
800
-
-
... More
Supervision, meter security and other liasioning charges payable to APDCL / Licensing Authority for construction of 11 KV H.T. line, Transformer Sub-station etc.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements