Assam University Tender

2 x 1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.(Approved Make : Wires/cables RR kable/Havells and Switch/socket/Modular boards Havells/Legrand/L&T or as approved by department)

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. .(Approved Make : Wires/cables RR kable/Havells and Switch/socket/Modular boards Havells/Legrand/L&T or as approved by department)

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required(Approved Make : Havells/Legrand/L&T or as approved by department)

Single pole

Double pole with SS enclosure

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Wiring to 2 X 5 A pin 6 Amps modular plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (RR Kabel /Havells or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Dep’t.) in surface system, including two no’s 5 pin 6A Modular type (2M) type plug socket and two no’s 6 Amps modular(1M) switch(Legrand/Havells/L&T/Indo Asian Glint) or equivalent make as approved by the Dep’t.), PVC surface box (6M) switch board with required face plate complete (Legrand/Havells/L&T/Indo Asian Glint) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.

Supplying of following A.C. Exhaust fan air delivery = 1600 cm/hr and rpm = 1300 in the existing hole on the wall of following sweeps with making necessary connection as approved by the Dep`t as required complete and as directed by the Department. 300 mm sweep (Havells/Crompton/Bajaj) as approved by department.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Dismantling of ceiling fan and painting the same with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, reinstalling the same as required

Numbering of ceiling fan/ exhaust fan fittings with three alpha-numeric letters combination as directed and complete.

Repairing and rewinding of 1200 mm ceiling fan along with change of fan capacitor and fan bearing complete as directed

Supplying fitting and fixing ball bearing of ceiling fan including testing installation complete as directed.

Supplying fitting & fixing of 18/20W T8 LED Polycarbonate Tube Light, in the existing T8 FTL fitting with G13 lamp holders with all accessories electronic drivers, holders required for completing the installation & as directed by department. Technical Specification details 100 lm/watt, 2.5-2 kV surge protection, rated current 0.09 A,THD20%, pf0.9,Material-Polycarbonate diffuser, Voltage range (100-300)V,CCT 6500+/-300 K ,CRI 75,Life span 50000 hrs, Glare free as per IS 103322.(Make: Havells/Bajaj/Phillips/Jaguar

Supplying fitting & fixing of surface or recessed mounting as per site requirement of 18 W LED(Round) down light fixtures with aluminium die cast housing and polycarbonate diffuser, in the existing CFL light fittings fixtures of 150 mm dia cut outs with all accessories electronic drivers, holders required for completing the installation with necessary cutting and fixing in false ceiling and making good of damage & cut with white cement/POP /Paint etc as required & as directed by department.(Make: Havells (Edge-pro round)/Bajaj/Phillips/jaguar(Areva round)

Supply fitting fixing of 100W LED roadway luminaries made of pressure die cast aluminium IP66 housing with high power LED as lighting source with toughened glass top cover and separate driver compartment and impact resistance of IK07 and 10 KV built-in surge protection. The roadway LED light fixture should be fitted in the existing double arm GI poles at site complete with required clamps and nuts bolts. (make Havells pearls magnum/ Bajaj/Phillips)

Supply fitting fixing of 10X8 inch hylam sheet complete along with fitting fixing of switch socket as directed