Assam University Tender

2 x 1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required(Havells/RR Kable)

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(Legrand Mylinc/Havells)

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required(Legrand /Havells/L&T)

Single pole

Double pole

Earthing with G.I.earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Wiring to 2 X 5 A pin 6 Amps modular plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Havells or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including two nos 5 pin 6A Modular type (2M) type plug socket and two nos 6 Amps modular(1M) switch (Legrand/havellls/L&T/Indo asian Glint) or equivalent make as approved by the Deptt.), PVC surface box (6M) switch board with required face plate complete (Legrand/havellls/L&T/Indo asian Glint) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.

Supplying of following A.C. Exhaust fan air delivery = 1600 cm/hr and rpm = 1300 in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.as required complete and as directed by the Department. 300 mm sweep

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Dismantling of ceiling fan and painting the same with with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, reinstalling the same as required

Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.

Repairing and rewinding of 1200 mm ceiling fan alongwith change of fan capacitor and fan bearing complete as directed

Supplying fitting & fixing of surface and wall mounted LED batten (18/20 W) with polycarbonate housing &integrated(Bajaj/Havells/Crompton)

Supplying fitting & fixing of surface or recessed mounting as per site requirement of 18 W LED(Round) down light fixtures with aluminium die cast housing and polycarbonate diffuser, in the existing CFL light fittings fixtures of 150 mm dia cut outs with all accessories electronic drivers, holders required for completing the installation with necessary cutting and fixing in false ceiling and making good of damage & cut with white cement/POP /Paint etc as required & as directed by deparment.(Make: Havells (Edge-pro round)/Bajaj/Phillips/jaguar(Areva round)

Supply fitting fixing of 10X8 inch hylamsheet complete alongwith fitting fixing of switch socket as directed

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Schneider, legrand, Siemens make) 125A

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Havells/ RPG/CCI/Polycab/Gloster/ Finolex make). 25.00 Sq. mm.3 & 1/2 Core armoured U.G. cable ,3.5 C

SITC of 200/100 ,Cu busbar for 3ph-4wire ,440,50 hz power line.(Legrand /Havells/L&T)