Assam University Tender

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

Single pole

Double pole

Wiring to 2 X 5 A pin 6 Amps modular plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Havells or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including two nos 5 pin 6A Modular type (2M) type plug socket and two nos 6 Amps modular(1M) switch (Legrand/havellls/L&T/Indo asian Glint) or equivalent make as approved by the Deptt.), PVC surface box (6M) switch board with required face plate complete (Legrand/havellls/L&T/Indo asian Glint) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.

Supplying fitting & fixing of surface and wall mounted LED batten (18/20 W) with polycarbonate housing & integrated

Supplying fitting & fixing of surface or recessed mounting as per site requirement of 18 W LED(Round) down light fixtures with aluminium die cast housing and polycarbonate diffuser, in the existing CFL light fittings fixtures of 150 mm dia cut outs with all accessories electronic drivers, holders required for completing the installation with necessary cutting and fixing in false ceiling and making good of damage & cut with white cement/POP /Paint etc as required & as directed by deparment.(Make: Havells (Edge-pro round)/Bajaj/Phillips/jaguar(Areva round)

Supply fitting fixing of 10X8 inch hylam sheet complete alongwith fitting fixing of switch socket as directed

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door

SITC of 100 W ,450 mm Wall Fan(Havells/Bajaj/Crompton/V guard) with metal frame and button control complete as directed